Market Survey. Technical Description Dismantling and Supply of Electrical Overhead Travelling (EOT) Cranes with a capacity up to 10 Tonnes

Size: px
Start display at page:

Download "Market Survey. Technical Description Dismantling and Supply of Electrical Overhead Travelling (EOT) Cranes with a capacity up to 10 Tonnes"

Transcription

1 EDMS No Group Code: EN-HE Market Survey Technical Description Dismantling and Supply of Electrical Overhead Travelling (EOT) Cranes with a capacity up to 10 Tonnes Abstract This Technical Description concerns the dismantling and supply of an estimated quantity of 30 EOT cranes on both the Swiss and French territory of the CERN site. This Market Survey will be followed by an Invitation to Tender for a five years blanket purchase contract that is planned to be issued in January September 2018

2 ii EDMS No Table of Contents 1. INTRODUCTION CERN Introduction to the Engineering Department (EN) and the Handling Engineering Group (EN-HE) SCOPE OF THE SUPPLY Deliverables and Activities Equipment and Services Made Available by CERN REQUIREMENTS Technical Requirements Norms and Standards PERFORMANCE OF THE CONTRACT Provisional delivery, installation and commissioning schedule Working on the CERN Site Acceptance Tests CONTACT PERSONS AT CERN... 4

3 EDMS No.: INTRODUCTION 1.1 CERN CERN, the European Organization for Nuclear Research, is an intergovernmental organization comprising Member States 1, with its seat in Geneva, Switzerland. Its facilities are located on either side of the border between Switzerland and France ( CERN s mission is to enable international collaboration in the field of high-energy particle physics research and to this end it designs, builds and operates particle accelerators and the associated experimental areas. At present, more than scientific users from research institutes all over the world are using CERN s installations for their experiments. The accelerator complex at CERN is a succession of machines with increasingly higher energies. Each machine injects the beam into the next one, which takes over to bring the beam to an even higher energy, and so on. The flagship of this complex is the Large Hadron Collider (LHC) as presented on the CERN website: Introduction to the Engineering Department (EN) and the Handling Engineering Group (EN-HE) The Engineering Department provides CERN with the Engineering Competences, Infrastructure Systems and Technical Coordination required for the design, installation, operation, maintenance and dismantling phases of the CERN accelerator complex and its experimental facilities. The mandate of the Handling Engineering (HE) Group is to provide transport and handling services for the technical infrastructure of CERN, accelerators and experiments. This includes the design, the tendering/procurement, the installation, the commissioning, the operation, the maintenance and the decommissioning of standard industrial and custom built transport and handling equipment. 2. SCOPE OF THE SUPPLY CERN intends to place a five years blanket purchase contract for the dismantling and the supply of an estimated quantity of 30 EOT cranes. The activities of the contract will include the dismantling of existing EOT cranes and the design, manufacturing, delivery, installation and commissioning of new ones (hereinafter referred to, in whole or in part, as the Supply or the EOT cranes ), as defined in this Technical Description, including its annexes, and in accordance with the criteria defined in the Qualification Questionnaire. The supply will also include preventive and corrective maintenance during warranty periods as well as training of CERN s operators in the use of the EOT cranes and maintenance personnel on how to perform maintenance activities after the end of the warranty periods. The contract represents no commitment on CERN side that the given estimated quantities will actually be ordered. 1 except where stipulated otherwise, the term Member State(s) shall mean full member state(s) of CERN, associate member state(s) of CERN and associate member state(s) in the pre-stage of accession to membership of CERN.

4 2 EDMS No: Deliverables and Activities The Supply shall include the following deliverables and activities: Documentation: design file, FAT report, as-built documents, CE certification, operation and maintenance manuals, technical files; Manufacturing and testing; Packing of the supply; Shipping to CERN, if so requested; Transport of all materials and tooling required for the dismantling of existing EOT cranes, installation of new ones, commissioning and maintenance on the CERN site; Dismantling of existing EOT cranes and waste sorting; Installation on the CERN site of new EOT cranes; Commissioning and final testing; Training of CERN personnel; Preventive and corrective maintenance during the warranty period. 2.2 Equipment and Services Made Available by CERN CERN will make available the following equipment and services: Verification of the structural stability of the buildings concerned; A supervisor from CERN who will be in charge of the coordination of the contractor s on-site work in relation to other site services and activities; Preparation of the space required for the execution of the dismantling and installation works; Power connection; Containers for disposal of waste; Loads needed for the acceptance tests. 3. REQUIREMENTS 3.1 Technical Requirements Table 1 gives an overview of the main characteristics of the EOT cranes: Crane type Table 1 - Main characteristics of the EOT cranes Top running or underhung; single or double girder Capacity [tonne] 1 to 10 Span [m] 6 to 25 Lifting height [m] 4 to 14 F.E.M. classification of structures and mechanisms Hoist type A4 - M4 Wire rope; open-type hoist in case of double girder cranes

5 EDMS No.: Motor start-up Frequency converter Max hoisting speed [m/min] 5 to 8 Mechanical safety features Safety zones Caliper-type emergency brake Managed by PLC or relay control logic Control system performance level C to D (ISO ) 3.2 Norms and Standards The Supply shall comply with the CERN Safety Rules, available at in particular but not limited to: SR-M - Mechanical equipment; GSI-M-1 - Lifting equipment and accessories; SSI-M Cranes, bridges cranes, gantry cranes and power driven hoists. It shall also comply with the following regulations: Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery; Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility; Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits. And the following standards: EN Cranes -- Bridge and gantry cranes; EN Cranes -- General design Part 1: General principles and requirements. 4. PERFORMANCE OF THE CONTRACT 4.1 Provisional delivery, installation and commissioning schedule The blanket purchase contract is scheduled to be awarded in June 2019 following the Invitation to Tender to be issued in January The Supply will be ordered, as and when required, by means of release orders issued by CERN. Dismantling of existing EOT cranes, as well as design, delivery, installation and commissioning of new EOT cranes shall be according to the schedule stated in the release order for the supply concerned. Indicatively, the requested delivery time for a new EOT crane will be four months from issuance of the release order. 4.2 Working on the CERN Site The contractor shall perform the contract on both the French and Swiss parts of the CERN site. The applicable law will be stipulated in the forthcoming Invitation to Tender documents. Particular features of the CERN site:

6 4 EDMS No: Specific safety requirements including safety, occupational health, working conditions and environmental protection apply; Customs formalities since the installations straddle the Swiss-French border. 4.3 Acceptance Tests CERN will carry out the following tests in the framework of the acceptance procedure: Factory Acceptance Tests (FAT): they shall include a general inspection of the supply, crane geometry measurement and functional tests (without load) during which the crane shall be completely assembled and the correct functioning of the control system validated; the contractor shall prepare a FAT report showing the test procedure, the acceptance criteria and the detected values. The contractor shall carry out the FAT, CERN reserves the right to be present or to be represented by an organization of its choice; Site Acceptance Tests (SAT): they will include load tests (static and dynamic) and functional tests; see CERN Safety Instruction SSI-M-1-2 for details (see 3.2). Tests will be carried out by CERN who will provide the loads needed; the contractor s representative shall be present during the site acceptance tests. 5. CONTACT PERSONS AT CERN For Technical Matters Name Tel Mr. Roberto Rinaldesi Tel: Roberto.Rinaldesi@cern.ch In case of absence: Mr. Jean-Pierre Granchelli Tel: Jean-Pierre.Granchelli@cern.ch For Commercial and Administrative Matters Name Tel Mr. Floris Bonthond Tel: Floris.Bonthond@cern.ch In case of absence: Mr. Bjorn Jenssen Tel: Bjorn.Jenssen@cern.ch

CALLS FOR TENDER AND MARKET SURVEYS ROLES AND PROCEDURES

CALLS FOR TENDER AND MARKET SURVEYS ROLES AND PROCEDURES EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH ORGANISATION EUROPÉENNE POUR LA RECHERCHE NUCLÉAIRE CERN - Division CERN--2000-010 February, 2000 CALLS FOR TENDER AND MARKET SURVEYS ROLES AND PROCEDURES L.

More information

EUROPEAN COMMISSION DIRECTORATE GENERAL FOR INTERPRETATION

EUROPEAN COMMISSION DIRECTORATE GENERAL FOR INTERPRETATION EUROPEAN COMMISSION DIRECTORATE GENERAL FOR INTERPRETATION RESOURCES AND SUPPORT DIRECTORATE Management of Technical Infrastructure Brussels, 23 January 2013 M/516 EN Ref. Ares(2013)136537-04/02/2013 REQUEST

More information

ELECTRICAL NETWORK SUPERVISOR STATUS REPORT

ELECTRICAL NETWORK SUPERVISOR STATUS REPORT EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH ORGANISATION EUROPÉENNE POUR LA RECHERCHE NUCLÉAIRE CERN - ST Division CERN-ST-2001-018 30 January 2001 ELECTRICAL NETWORK SUPERVISOR STATUS REPORT S. Poulsen

More information

Mesekon Oy Turku ISO 9001:2008, ISO :2005

Mesekon Oy Turku ISO 9001:2008, ISO :2005 Certificate No. 2541-10 has granted this certificate as proof that the quality system of Turku complies with the requirements of the standard ISO 9001:2008, ISO 3834-2:2005 Certification covers Contract

More information

MEM31215 Certificate III in Engineering - Industrial Electrician

MEM31215 Certificate III in Engineering - Industrial Electrician MEM31215 Certificate III in Engineering - Industrial Electrician Release 2 MEM31215 Certificate III in Engineering - Industrial Electrician Modification History Release 2. MSAENV272B updated to MSMENV272.

More information

INSPIRE status report

INSPIRE status report INSPIRE Team INSPIRE Status report 29/10/2010 Page 1 of 7 INSPIRE status report Table of contents 1 INTRODUCTION... 1 2 INSPIRE STATUS... 2 2.1 BACKGROUND AND RATIONAL... 2 2.2 STAKEHOLDER PARTICIPATION...

More information

Welding Certificate TÜV SÜD

Welding Certificate TÜV SÜD Welding Certificate TÜV SÜD-00064.2013.004 in accordance with EN 1090-1, table B.1, its hereby declared: The manufacturer has produced evidence that he fulfills the requirements of the European standard

More information

COMMISSION IMPLEMENTING REGULATION (EU) /... of XXX

COMMISSION IMPLEMENTING REGULATION (EU) /... of XXX COISSION IPLEENTING REGULATION (EU) /... of XXX establishing the format for registration and reporting and the frequency of reporting to the register (Text with EEA relevance) THE EUROPEAN COISSION, Having

More information

ekey home en OPERATING INSTRUCTIONS

ekey home en OPERATING INSTRUCTIONS ekey home en OPERATING INSTRUCTIONS 01 English Translation of the original instructions ID159/271/0/135 Table of contents General...2 Note... 2 Product liability and limitation of liability... 2 Warranty

More information

CEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act''

CEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act'' CEN Identification number in the EC register: 63623305522-13 CENELEC Identification number in the EC register: 58258552517-56 CEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act''

More information

Section I. GENERAL PROVISIONS

Section I. GENERAL PROVISIONS LAW OF THE RUSSIAN FEDERATION NO. 5151-1 OF JUNE 10, 1993 ON CERTIFICATION OF PRODUCTS AND SERVICES (with the Additions and Amendments of December 27, 1995, March 2, July 31, 1998) Federal Law No. 154-FZ

More information

CAPIEL Position Paper WEEE Scope

CAPIEL Position Paper WEEE Scope CAPIEL Position Paper WEEE Scope 1. Purpose of this paper The purpose of this CAPIEL paper is to help manufacturers to determine whether or not the products they place on the market fall within the scope

More information

Toward Horizon 2020: INSPIRE, PSI and other EU policies on data sharing and standardization

Toward Horizon 2020: INSPIRE, PSI and other EU policies on data sharing and standardization Toward Horizon 2020: INSPIRE, PSI and other EU policies on data sharing and standardization www.jrc.ec.europa.eu Serving society Stimulating innovation Supporting legislation The Mission of the Joint Research

More information

United Kingdom Accreditation Service

United Kingdom Accreditation Service United Kingdom Accreditation Service ACC REDITATION C ERTI FIGATE CERTIFICATION BODY No.4718 lnterface NRM Limited is accredited in accordance with the recognised lnternational Standard ISO/lEC 17021:2011

More information

Mandate to CEN, CENELEC and ETSI for Standardisation in the field of electric motors

Mandate to CEN, CENELEC and ETSI for Standardisation in the field of electric motors Ref. Ares(2010)367759-25/06/2010 EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR ENERGY Directorate C - New and renewable sources of energy, Energy efficiency & Innovation C.3 - Energy efficiency of products

More information

CONTROL SYSTEMS DESIGN SPECIFICATION

CONTROL SYSTEMS DESIGN SPECIFICATION CONTROL SYSTEMS DESIGN SPECIFICATION Version : 1.00 This document aims to identify clearly and precisely what CooperVision seeks to achieve with this project/system. It defines the function of the system

More information

Quality Assurance and esecurity

Quality Assurance and esecurity Ministère de l Economie, de l Industrie et de l Emploi Department for Economy, Industry and Employment Quality Assurance and esecurity Claude DAULAUD In-vehicle Communication, Telematics and Co-operative

More information

ekey home OPERATING INSTRUCTIONS

ekey home OPERATING INSTRUCTIONS ekey home en OPERATING INSTRUCTIONS English Translation of the original instructions - ID2245170369 Table of contents General... 2 Note... 2 Product liability and limitation of liability... 2 Warranty

More information

DECISION OF THE EUROPEAN CENTRAL BANK

DECISION OF THE EUROPEAN CENTRAL BANK L 74/30 Official Journal of the European Union 16.3.2013 DECISIONS DECISION OF THE EUROPEAN CENTRAL BANK of 11 January 2013 laying down the framework for a public key infrastructure for the European System

More information

SLHC-PP DELIVERABLE REPORT EU DELIVERABLE: Document identifier: SLHC-PP-D v1.1. End of Month 03 (June 2008) 30/06/2008

SLHC-PP DELIVERABLE REPORT EU DELIVERABLE: Document identifier: SLHC-PP-D v1.1. End of Month 03 (June 2008) 30/06/2008 SLHC-PP DELIVERABLE REPORT EU DELIVERABLE: 1.2.1 Document identifier: Contractual Date of Delivery to the EC Actual Date of Delivery to the EC End of Month 03 (June 2008) 30/06/2008 Document date: 27/06/2008

More information

IECEx International Certification: The way to safety compliance in hazardous areas IEC System for Certification to Standards Relating to Equipment

IECEx International Certification: The way to safety compliance in hazardous areas IEC System for Certification to Standards Relating to Equipment IECEx International Certification: The way to safety compliance in hazardous areas IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres IECEx International Certification

More information

Accreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service

Accreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service Accreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service 1. Overview of HKAS Originated as an accreditation scheme called HOKLAS in 1985

More information

INAB Mandatory and Guidance Documents Policy and Index

INAB Mandatory and Guidance Documents Policy and Index INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such

More information

SMARTSCAN INFORMATION

SMARTSCAN INFORMATION SMARTSCAN INFORMATION SL4 (014) SERIES SAFETY LIGHT CURTAINS HANDBOOK Smartscan Ltd, Pywell Road, CORBY, NN17 5XJ, UK, Tel: +44 (0) 1536 401313, Fax: +44 (0) 1536 268954, Email: sales@smartscan.co.uk,

More information

EUROPEAN COMMISSION Enterprise Directorate-General

EUROPEAN COMMISSION Enterprise Directorate-General EUROPEAN COMMISSION Enterprise Directorate-General Services, commerce, tourism, e-business & IDA E-business, ICT industries and services Brussels, 21 October 2003 DG ENTR-D4 M 338 - EN Standardisation

More information

Testing and Certification Procedure

Testing and Certification Procedure A PM 101E April 2011 Guideline for the Testing and Certification Procedure of the VDE Testing and Certification Institute (VDE Institute) (For information purpose only. In any case the German version shall

More information

UEEE and WEEE Classification. Marina de Gier, IMPEL Waste & TFS Singapore 24 th November

UEEE and WEEE Classification. Marina de Gier, IMPEL Waste & TFS Singapore 24 th November UEEE and WEEE Classification Marina de Gier, IMPEL Waste & TFS Singapore 24 th November Introduction Legislation Distinction UEEE and WEEE WEEE classification Three main regulations: Legislation 1. Waste

More information

Level 2 Certificate in Asbestos Removal For Operatives

Level 2 Certificate in Asbestos Removal For Operatives Level 2 Certificate in Asbestos Removal For Operatives Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 5 Support

More information

TOWER CRANE EMPLOYER DECLARATION OF WORK EXPERIENCE

TOWER CRANE EMPLOYER DECLARATION OF WORK EXPERIENCE To qualify to challenge certification in this trade, you must: Have experience performing all of the tasks listed in Section D and Have worked a minimum of 1,024 documented hours of which 500 hours are

More information

Market Surveillance Action Plan

Market Surveillance Action Plan Ref. Ares(2015)402331-02/02/2015 MEMORANDUM Date 12 November 2014 1(8) Spectrum Department Market Surveillance Action Plan 2013-2015 1 Legal basis According to Section 1 of the Ordinance (2007:951) with

More information

Public consultation on the revision of the Recommendation on relevant markets

Public consultation on the revision of the Recommendation on relevant markets PER E-MAIL cnect-relevant-markets@ec.europa.eu EUROPEAN COMMISSION DG Communications Networks, Content & Technology Regulatory Coordination and Markets Unit (B3) BU33 6/26 CM Groep Konijnenberg 30 4825

More information

CNCA / CCC Serial No.: CNCA-C11-04:2014

CNCA / CCC Serial No.: CNCA-C11-04:2014 Translated English of Chinese CCC Regulations: CNCA C11-04:2014 Translated by: www.chinesestandard.net Sales@ChineseStandard.net Wayne Zheng et al. CNCA / CCC Serial No.: CNCA-C11-04:2014 CNCA-C11-04-2014

More information

Delegations will find attached document D038863/05.

Delegations will find attached document D038863/05. Council of the European Union Brussels, 4 April 2016 (OR. en) 7477/16 ENV 189 COVER NOTE From: European Commission date of receipt: 29 March 2016 To: No. Cion doc.: D038863/05 Subject: General Secretariat

More information

Grid Computing a new tool for science

Grid Computing a new tool for science Grid Computing a new tool for science CERN, the European Organization for Nuclear Research Dr. Wolfgang von Rüden Wolfgang von Rüden, CERN, IT Department Grid Computing July 2006 CERN stands for over 50

More information

Scheme Document. For more information or help with your application contact BRE Global on +44 (0) or

Scheme Document. For more information or help with your application contact BRE Global on +44 (0) or Page: Page 1 of 15 1. Introduction This certification scheme has been designed to promote sustainable production of construction products and materials. Responsible sourcing includes organisational management,

More information

BRE Global Limited Scheme Document SD 186: Issue No December 2017

BRE Global Limited Scheme Document SD 186: Issue No December 2017 BRE Global Limited Scheme Document SD 186: Issue No. 11.1 Commercial-in-Confidence Page 1 of 9 Introduction This certification scheme has been designed to promote the use of sustainable materials and

More information

PRODUCT CERTIFICATION AND CONFORMITY ASSESSMENT SCHEME GENERAL PRINCIPLES

PRODUCT CERTIFICATION AND CONFORMITY ASSESSMENT SCHEME GENERAL PRINCIPLES Page: 1/18 Developed by: Jakub Dering Approved by: Przemysław Gałka 1. GENERAL INFORMATION Product Certification Bureau (CW) is an independent organizational unit in the structure of the Polish Register

More information

CYBERSECURITY IMPLEMENTATION FOR THE MARINE AND OFFSHORE INDUSTRIES

CYBERSECURITY IMPLEMENTATION FOR THE MARINE AND OFFSHORE INDUSTRIES GUIDE FOR CYBERSECURITY IMPLEMENTATION FOR THE MARINE AND OFFSHORE INDUSTRIES ABS CyberSafety TM VOLUME 2 SEPTEMBER 2016 NOTICE NO. 2 June 2018 The following Changes were approved by the ABS Rules Committee

More information

UK EPR GDA PROJECT. Name/Initials Date 30/06/2011 Name/Initials Date 30/06/2011. Resolution Plan Revision History

UK EPR GDA PROJECT. Name/Initials Date 30/06/2011 Name/Initials Date 30/06/2011. Resolution Plan Revision History RP unique number: GI-UKEPR-CI-01-RP 0 30/06/2011 1 of 19 Approved for EDF by: A. PETIT Approved for AREVA by: C. WOOLDRIDGE Name/Initials Date 30/06/2011 Name/Initials Date 30/06/2011 Resolution Plan History

More information

LOW VOLTAGE AC DRIVES. Crane control and safety with ACS880 drives

LOW VOLTAGE AC DRIVES. Crane control and safety with ACS880 drives LOW VOLTAGE AC DRIVES Crane control and safety with ACS880 drives 2 LOW VOLTAGE AC DRIVES BROCHURE Safety. Performance. Efficiency. Speed. Everything counts Overhead cranes need to be carefully designed

More information

As a minimum, the scope of work shall include: 1.12 GPA will install the new drive control equipment per contractor supplied elementary drawings.

As a minimum, the scope of work shall include: 1.12 GPA will install the new drive control equipment per contractor supplied elementary drawings. Requisition # 10093128- Page 6 of 15 1.0 GENERAL REQUIREMENTS: 1.1 Scope Of Work: 1.11 Work includes, but is not limited to, providing all materials and technical direction required to replace the existing

More information

Digital Control Power Supply IT6720. User s Manual. Access for more products information

Digital Control Power Supply IT6720. User s Manual. Access   for more products information IT6720 Digital Control Power Supply User s Manual ccess www.itechate.com for more products information WRNING Safety Regulations Certification Notice Warranty To avoid electrical shock, do not open the

More information

INAB Mandatory and Guidance Documents Policy and Index

INAB Mandatory and Guidance Documents Policy and Index INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such

More information

Framework for building information modelling (BIM) guidance

Framework for building information modelling (BIM) guidance TECHNICAL SPECIFICATION ISO/TS 12911 First edition 2012-09-01 Framework for building information modelling (BIM) guidance Cadre pour les directives de modélisation des données du bâtiment Reference number

More information

Returnable Schedules

Returnable Schedules Returnable Schedules Engineering, and Construction of a fixed tilt Solar Photovoltaic Power Facility (Phase I) at the CSIR Campus in Pretoria on building 3, 10, 22, 23 and 33 Date of issue 17 th October

More information

"EU feasibility study on WEEE preparation for reuse targets and relation to a revised Circular Εconomy package"

EU feasibility study on WEEE preparation for reuse targets and relation to a revised Circular Εconomy package European Commission DG Environment- Waste Management & Recycling Unit Maria Banti Policy Officer- WEEE "EU feasibility study on WEEE preparation for reuse targets and relation to a revised Circular Εconomy

More information

User Guide. Cloning interface small option module for Unidrive and Commander GP. Part Number: Issue Number: 3

User Guide. Cloning interface small option module for Unidrive and Commander GP. Part Number: Issue Number: 3 User Guide UD55 Cloning interface small option module for Unidrive and Commander GP Part Number: 0460-0095 Issue Number: 3 General Information The manufacturer accepts no liability for any consequences

More information

CSCS CERN videoconference CFD applications

CSCS CERN videoconference CFD applications CSCS CERN videoconference CFD applications TS/CV/Detector Cooling - CFD Team CERN June 13 th 2006 Michele Battistin June 2006 CERN & CFD Presentation 1 TOPICS - Some feedback about already existing collaboration

More information

Cybersecurity Policy in the EU: Security Directive - Security for the data in the cloud

Cybersecurity Policy in the EU: Security Directive - Security for the data in the cloud Cybersecurity Policy in the EU: The Network and Information Security Directive - Security for the data in the cloud Microsoft Commitment to Cybersecurity Security at the heart of our products and services

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnical data sheet NVK4A-SR-PC Modulating globe valve actuator for -way and 3-way globe valves Actuating force 000 N Nominal voltage AC/DC 4 V Control: modulating DC (0) V...0 V Nominal stroke 0 mm Design

More information

EUROPEAN COMMISSION DIRECTORATE-GENERAL INFORMATION SOCIETY AND MEDIA

EUROPEAN COMMISSION DIRECTORATE-GENERAL INFORMATION SOCIETY AND MEDIA Ref. Ares(2011)514527-12/05/2011 EUROPEAN COMMISSION DIRECTORATE-GENERAL INFORMATION SOCIETY AND MEDIA Electronic Communications Policy Implementation of Regulatory Framework (I) Brussels, 6th May 2011

More information

Keystone OM3 - EPI-2 Local Interface Module Installation and Maintenance Instructions

Keystone OM3 - EPI-2 Local Interface Module Installation and Maintenance Instructions Index 1 Optional module 3: Local Interface module... 1 2 Installation... 2 3 Description of OM3 Local Interface... 4 4 To locally operate the actuator... 4 5 OM3 wiring diagram... 5 6 Identification...

More information

USING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY

USING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY Ref. Ares(2014)2675967-13/08/2014 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Regulaty policy Regulaty Approach f the free movement of goods NOTE TO THE SENIOR OFFICIALS GROUP ON STANDARDISATION

More information

Thomson Max Jac Electric Linear Actuator

Thomson Max Jac Electric Linear Actuator Thomson Max Jac Electric Linear Actuator Installation Manual Edition 2013-11 DW110692GB-1348 Thomson Version History Edition Reason for revision 2013-11 First edition Warranty The Thomson Max Jack is warranted

More information

PRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS

PRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS Ref No: RACS/PCS/22 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Children Toys

More information

Washington State Construction Crane Certifier Program

Washington State Construction Crane Certifier Program Washington State Construction Crane Certifier Program CANDIDATE HANDBOOK ACCREDITATION PROCESS In the State of Washington, candidates may seek accreditation as a Crane Certifier in one or more of the following

More information

EUROPEAN ACCREDITATION LEGAL FRAMEWORK

EUROPEAN ACCREDITATION LEGAL FRAMEWORK EUROPEAN ACCREDITATION LEGAL FRAMEWORK ECIBC Plenary 2016 Ed Wieles 24 November 2016 CONTENTS European model on Accreditation Requirements for Accreditation bodies Harmonised standards for accreditation

More information

EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL

EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL New Approach Industries, Tourism and CSR Construction, Pressure Equipment, Metrology Brussels, 21 st December 2009 M/457 EN Standardisation

More information

ANNEXES. to the. Proposal for a Regulation of the European Parliament and of the Council

ANNEXES. to the. Proposal for a Regulation of the European Parliament and of the Council EUROPEAN COMMISSION Brussels, 17.4.2018 COM(2018) 225 final ANNEXES 1 to 3 ANNEXES to the Proposal for a Regulation of the European Parliament and of the Council on European Production and Preservation

More information

IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System)

IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System) IECRE 03 Edition 2.0 2018-08-14 IECRE PUBLICATION IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System) Marine Energy Operational Management

More information

Introduction. Content. Training Course NAA Inspectors Training Course - Initial Airworthiness. Location(s) / Date(s) List price September 2019

Introduction. Content. Training Course NAA Inspectors Training Course - Initial Airworthiness. Location(s) / Date(s) List price September 2019 Training Course NAA Inspectors Training Course - Initial Airworthiness Location(s) / Date(s) Hoofddorp, 11-13 February 2019 Netherlands 17-19 September 2019 List price 1290.00 Introduction EU Regulation

More information

Level 2 Certificate in Asbestos Removal For Operatives (QCF)

Level 2 Certificate in Asbestos Removal For Operatives (QCF) Level 2 Certificate in Asbestos Removal For Operatives (QCF) Qualification Specification ProQual 2012 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile

More information

IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System)

IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System) IECRE 03 Edition 1.0 2017-09-11 IECRE PUBLICATION IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System) Marine Energy Operational Management

More information

13543/17 PhL/at 1 DG G 3 B

13543/17 PhL/at 1 DG G 3 B Council of the European Union Brussels, 24 October 2017 (OR. en) 13543/17 UD 239 NOTE From: To: General Secretariat of the Council Permanent Representatives Committee/Council No. prev. doc.: ST 12287/5/17

More information

REQUEST FOR PROPOSALS Consultant to Develop Educational Materials for the Applied Informatics Team Training

REQUEST FOR PROPOSALS Consultant to Develop Educational Materials for the Applied Informatics Team Training REQUEST FOR PROPOSALS Consultant to Develop Educational Materials for the Applied Informatics Team Training Table of Contents: Part I. Overview Information Part II. Full Text of Announcement Section I.

More information

Phase comparator. User manual Document version: 02i00 Update:

Phase comparator. User manual Document version: 02i00 Update: Phase comparator User manual Document version: 02i00 Update: 2015-03-13 Safety information When the device is in operation some of its parts may be connected to a hazardous live voltage. Improper operation

More information

Report. Certificate M6A SIMATIC S7 Distributed Safety

Report. Certificate M6A SIMATIC S7 Distributed Safety Report to the Certificate M6A 17 05 67803 014 Safety-Related Programmable Systems SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision 3.1 dated

More information

Analysis of part B GMO deliberate release field trials management in Member States and prevention of accidental entry into the marketplace

Analysis of part B GMO deliberate release field trials management in Member States and prevention of accidental entry into the marketplace Analysis of part B GMO deliberate release field trials management in Member States and prevention of accidental entry into the marketplace A study for EC DG Environment under research tender ENV.B.3/ETU/2007/0008

More information

Request for Expressions of Interest: The EU mhealth Hub

Request for Expressions of Interest: The EU mhealth Hub Request for Expressions of Interest: The EU mhealth Hub A project within the framework of the WHO-ITU joint initiative Be He@lthy, Be Mobile The project is supported by the European Commission Horizon2020

More information

XEC supercap (v. 1.0)

XEC supercap (v. 1.0) XEC supercap (v. 1.0) 1. Installation notes symbol alerts the user of important operating and maintenance (assistance) instructions found in the documentation attached to the device. This manual forms

More information

COMMISSION REGULATION (EU) No /.. of XXX

COMMISSION REGULATION (EU) No /.. of XXX EUROPEAN COMMISSION Brussels, XXX [ ](2013) XXX draft COMMISSION REGULATION (EU) No /.. of XXX amending Commission Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode

More information

CNCA-C11-09:2014. Translated English of Chinese CCC Regulations: CNCA C11-09:2014. Translated by:

CNCA-C11-09:2014. Translated English of Chinese CCC Regulations: CNCA C11-09:2014. Translated by: Translated English of Chinese CCC Regulations: CNCA C11-09:2014 Translated by: www.chinesestandard.net Sales@ChineseStandard.net Wayne Zheng et al. CNCA / CCC Serial No.: CNCA-C11-09:2014 CNCA-C11-09-2014

More information

Report. Certificate M6A SIMATIC Safety System

Report. Certificate M6A SIMATIC Safety System Report to the Certificate M6A 067803 0019 Safety-Related Programmable Systems SIMATIC Safety System Manufacturer: Siemens AG Gleiwitzer Str. 555 D-90475 Nürnberg Revision 2.1 dated 2018-09-25 Testing Body:

More information

ISO INTERNATIONAL STANDARD. Ergonomic design of control centres Part 2: Principles for the arrangement of control suites

ISO INTERNATIONAL STANDARD. Ergonomic design of control centres Part 2: Principles for the arrangement of control suites INTERNATIONAL STANDARD ISO 11064-2 First edition 2000-12-15 Ergonomic design of control centres Part 2: Principles for the arrangement of control suites Conception ergonomique des centres de commande Partie

More information

Ref No: RACS/PCS/10 Page 1 of 7. Revision No: 00 Revision Date: October 1, 2018 PRODUCT CERTIFICATION SCHEME FOR ELECTRICAL EQUIPMENT

Ref No: RACS/PCS/10 Page 1 of 7. Revision No: 00 Revision Date: October 1, 2018 PRODUCT CERTIFICATION SCHEME FOR ELECTRICAL EQUIPMENT Ref No: RACS/PCS/10 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Electrical

More information

PRODUCT CERTIFICATION SCHEME FOR METROLOGY SYSTEM

PRODUCT CERTIFICATION SCHEME FOR METROLOGY SYSTEM Ref No: RACS/PCS/20 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Metrology System

More information

TURKISH ACCREDITATION AGENCY. Training, Promotion and Information Directorate

TURKISH ACCREDITATION AGENCY. Training, Promotion and Information Directorate TURKISH ACCREDITATION AGENCY Training, Promotion and Information Directorate About us... Main field of activity of the Training, Promotion and Information Directorate (TPID) is organizing the training

More information

Sliding shutter control Aluminium shutters

Sliding shutter control Aluminium shutters Sliding shutter control Aluminium shutters Operating and maintenance instructions FOR THE USER Valid from 09.2011 E 916.3 Notes These operating instructions describe how to operate the EHRET sliding shutter

More information

ETSI ES V1.2.1 ( )

ETSI ES V1.2.1 ( ) ES 202 913 V1.2.1 (2004-07) Standard Access and Terminals (AT); POTS requirements applicable to ADSL modems when connected to an analogue presented PSTN line 2 ES 202 913 V1.2.1 (2004-07) Reference RES/AT-010115

More information

the provision of the Design, Manufacturing and Delivery of Rigid Hull Inflatable Boats to Pakistan

the provision of the Design, Manufacturing and Delivery of Rigid Hull Inflatable Boats to Pakistan CONTRACT No. [INSERT between the International Atomic Energy Agency, [INSERT CONTRACTOR S NAME] and [INSERT END-USER S NAME] concerning the provision of the Design, Manufacturing and Delivery of Rigid

More information

PRODUCT CERTIFICATION SCHEME FOR MILK AND DAIRY PRODUCTS

PRODUCT CERTIFICATION SCHEME FOR MILK AND DAIRY PRODUCTS Ref No: RACS/PCS/16 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Milk

More information

FSC STANDARD. Standard for Multi-site Certification of Chain of Custody Operations. FSC-STD (Version 1-0) EN

FSC STANDARD. Standard for Multi-site Certification of Chain of Custody Operations. FSC-STD (Version 1-0) EN FOREST STEWARDSHIP COUNCIL INTERNATIONAL CENTER FSC STANDARD Standard for Multi-site Certification of Chain of Custody Operations FSC-STD-40-003 (Version 1-0) EN 2007 Forest Stewardship Council A.C. All

More information

Canadian Registered Safety Professional (CRSP) Certification AUDITING ASSOCIATION OF CANADA BCRSP CERTIFICATION; AN OVERVIEW

Canadian Registered Safety Professional (CRSP) Certification AUDITING ASSOCIATION OF CANADA BCRSP CERTIFICATION; AN OVERVIEW Canadian Registered Safety Professional (CRSP) Certification AUDITING ASSOCIATION OF CANADA BCRSP CERTIFICATION; AN OVERVIEW JOHN HOLLOHAN, CRSP, BOARD GOVERNOR, HALIFAX, NOVA SCOTIA, SEPTEMBER 16, 2015

More information

Rules for LNE Certification of Management Systems

Rules for LNE Certification of Management Systems Rules for LNE Certification of Management Systems Application date: March 10 th, 2017 Rev. 040716 RULES FOR LNE CERTIFICATION OF MANAGEMENT SYSTEMS CONTENTS 1. PURPOSE... 3 2. SCOPE... 3 3. DEFINITION

More information

ACCREDITATION: A BRIEFING FOR GOVERNMENTS AND REGULATORS

ACCREDITATION: A BRIEFING FOR GOVERNMENTS AND REGULATORS ACCREDITATION: A BRIEFING FOR GOVERNMENTS AND REGULATORS Accreditation is continuously gaining recognition as an important technical tool in the delivery of objectives across an increasing range of policy

More information

If you have any questions regarding this survey, please contact Marcell Reid at or Thank you for your support!

If you have any questions regarding this survey, please contact Marcell Reid at or Thank you for your support! ABBVIE GLOBAL SUPPLIER SUSTAINBILITY PROGRAM Annual Supplier Sustainability As an important supplier to AbbVie, we would like to document and assess your company s activities and progress regarding sustainability

More information

ETHIOPIAN NATIONAL ACCREDITATION OFFICE. Minimum Requirements For The Operation Of Product Certification Bodies

ETHIOPIAN NATIONAL ACCREDITATION OFFICE. Minimum Requirements For The Operation Of Product Certification Bodies ETHIOPIAN NATIONAL ACCREDITATION OFFICE Minimum Requirements For The Operation Of Product Certification Bodies April 2011 Page 1 of 7 NO CONTENTS Page 1. Introduction 2 2. Scope 2 3. Definitions 2 4 Management

More information

NASA Policy Directive

NASA Policy Directive NASA Policy Directive NPD 8820.2D Effective Date: July 02, 2013 Expiration Date: July 02, 2018 COMPLIANCE IS MANDATORY Subject: Design and Construction of Facilities Responsible Office: Facilities Engineering

More information

This is a preview - click here to buy the full publication TECHNICAL REPORT. Programmable controllers

This is a preview - click here to buy the full publication TECHNICAL REPORT. Programmable controllers TECHNICAL REPORT IEC TR 61131-4 Second edition 2004-07 Programmable controllers Part 4: User guidelines IEC 2004 Copyright - all rights reserved No part of this publication may be reproduced or utilized

More information

Assessment of the Scope of Directives 2002/96/EC on WEEE and 2002/95/EC on RoHS

Assessment of the Scope of Directives 2002/96/EC on WEEE and 2002/95/EC on RoHS Assessment of the Scope of Directives 2002/96/EC on WEEE and 2002/95/EC on RoHS Additional interpretations based on existing Community legislation and Commission guidelines Orgalime Position Paper Brussels,

More information

COM. Light 1. Light 2

COM. Light 1. Light 2 Control unit for lights or motor Supplied with 433Mhz plug-in receiver 100% ITALY START-S102 Instructions and warnings for the installer Connection for the Motor 1 Input 2 Input Open Close hase 230 Vac

More information

Application Guideline for BOP/Volume Zone Business Support Coordinator UZBEKISTAN in FY 2015

Application Guideline for BOP/Volume Zone Business Support Coordinator UZBEKISTAN in FY 2015 Application Guideline for BOP/Volume Zone Business Support Coordinator UZBEKISTAN in FY 2015 April 7, 2015 Manabu Shimoyashiro President Director JETRO Tashkent The Japan External Trade Organization, JETRO

More information

SLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008

SLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008 SLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008 REQUIREMENTS FOR CERTIFICATION BODIES CONDUCTING FOREST CERTIFICATION AND CHAIN - OF - CUSTODY OF WOOD VERIFICATION SFCS 1005:2004 Effective as of September

More information

Application Guideline for BOP Business Support Coordinator BANGLADESH in FY 2013

Application Guideline for BOP Business Support Coordinator BANGLADESH in FY 2013 Application Guideline for BOP Business Support Coordinator BANGLADESH in FY 2013 1 May, 2013 Kei Kawano Representative JETRO Dhaka The Japan External Trade Organization (JETRO) Dhaka Office will retain

More information

WELCOME ISO/IEC 27001:2017 Information Briefing

WELCOME ISO/IEC 27001:2017 Information Briefing WELCOME ISO/IEC 27001:2017 Information Briefing Denis Ryan C.I.S.S.P NSAI Lead Auditor Running Order 1. Market survey 2. Why ISO 27001 3. Requirements of ISO 27001 4. Annex A 5. Registration process 6.

More information

Type Certification of Wind Turbines

Type Certification of Wind Turbines DNV SERVICE SPECIFICATION DNV-DSS-904 Type Certification of Wind Turbines JANUARY 2014 The electronic pdf version of this document found through http://www.dnv.com is the officially binding version FOREWORD

More information

ERF910. RF Repeater. Synco living

ERF910. RF Repeater. Synco living 2 704 Synco living RF Repeater ERF910 Wireless RF repeater for extending plant RF communication based on KNX standard (868 MHz, bidirectional) Mains-powered AC 2 V (with external power pack) Use For integration

More information

Abu Dhabi Certification Scheme for Beauty Salon Sector

Abu Dhabi Certification Scheme for Beauty Salon Sector Abu Dhabi Certification Scheme for Beauty Salon Sector Hairstylist Assessment and Surveillance Plan for Beauty Salon Sector Hairstylist Issue: 1.0 Date: 27/11/2016 Total Number of Pages: 12 Table of Contents

More information

QUESTION / CLARIFICATION

QUESTION / CLARIFICATION QUESTION / CLARIFICATION CO-ORDINATION BETWEEN NOTIFIED BODIES DIRECTIVE 2008/57/EC AND SUBSEQUENT AMENDMENTS ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE UNION QC-INF-015 Issue 01 Date: 25/02/2015

More information