H Set up data source for a device using OPC UA protocol...h-2

Size: px

Start display at page:

Download "H Set up data source for a device using OPC UA protocol...h-2"

Veronica Holmes
5 years ago
Views:

1 Set Up ata Source Using OP U protocol n this ppendix... ppendix Set up data source for a device using OP U protocol...-2

lick on the SRVS tab (10). lick the +(dd) button ().

2 inx ppendix : Set Up ata Source Using OP U protocol Set up data source for a device using OP U protocol onfigure the address and protocol for the P from which data will be read lick on the SRVS tab (10). lick the +(dd) button (). dd a ame and the P ddress of the P where the data resides. lick XT. -2 Strideinx ndustrial VP Routers User anual 1st dition, Rev.

f your P is protected with a password, select Username and password as the

3 ppendix : Set Up ata Source Using OP U protocol Select T SOUR. Select the OP U protocol and enter the port number of the OP Server you are using. f your P is protected with a password, select Username and password as the authentication type and enter the credentials. Then click to continue. Strideinx ndustrial VP Routers User anual 1st dition, Rev. -3

inx ppendix : Set Up ata Source Using OP U protocol onfigure the data tags To add a data tag, go to the SRVS tab for the router and click the dit services (pencil) icon next to the device for which

OT: t is advisable to enter data tags in small batches, and test the variables periodically to verify the entries.

4 inx ppendix : Set Up ata Source Using OP U protocol onfigure the data tags To add a data tag, go to the SRVS tab for the router and click the dit services (pencil) icon next to the device for which you want to add the data tag. This opens the dit services dialog. lick the name of the existing device for which you would like to add a data tag. OT: t is advisable to enter data tags in small batches, and test the variables periodically to verify the entries. The entries can be tested by clicking RU TST in the onfigurator, or from the loud ogging Web pp as described in the ata ogger Test Utility section. Please refresh your browser if the information on screen appears to not be updated properly at any time. The resulting dit service screen displays the parameters for the data source, plus a count of existing data tags. lick OP OURTOR to add or edit tags. -4 Strideinx ndustrial VP Routers User anual 1st dition, Rev.

5 ppendix : Set Up ata Source Using OP U protocol ata tags can be entered interactively, or a set of tags can be imported from a previouslyexported SV file. xport of sets of data tags is discussed later in the xport ata Tags subsection. or this example, select dd new variable to manually enter tags. data entry screen opens, with one new data tag ready to be entered. Set the relevant parameters for the new data tag. The data tag input fields and supported data types are described in the next two tables, respectively. Subsequent figures illustrate the correct syntax for entering OP U addresses. dditional data tags can be entered in this round by clicking +1 in the lower left corner of the screen. When all the desired tags have been entered click. Strideinx ndustrial VP Routers User anual 1st dition, Rev. -5

inx ppendix : Set Up ata Source Using OP U protocol ield ame Select a data type ddress Unit (optional) actor (optional) ata Tag nput ields escription ive the data tag a logical name.

6 inx ppendix : Set Up ata Source Using OP U protocol ield ame Select a data type ddress Unit (optional) actor (optional) ata Tag nput ields escription ive the data tag a logical name. See next table for the available data types. See the next subsection, OP U ddress notation and lookup. ere you can assign a value to a unit, for example, gallons or psi. This allows you to multiply by a value. or example, factor 0.01 divides the data value by 100. ata Types Supported ool loat32 loat64 nt8 nt16 nt32 nt64 Uint8 Uint16 Uint32 Uint64 String -6 Strideinx ndustrial VP Routers User anual 1st dition, Rev.

7 ppendix : Set Up ata Source Using OP U protocol There are two types of identifiers: string and numeric value. oth require a different data tag address with cloud data logging or notification. ddressing a data tag when the identifier type is umeric is as follows: ns=(id);i=(identifier). or example, a piece of integer numeric data with a numeric identifier of would be set up in Strideinx as shown below. ddressing a data tag when the identifier type is String is as follows: ns=(id);s=(identifier). Thus, the same piece of numeric data with a string identifier of otorsetpoint would be set up in Strideinx as shown below. The following subsection, OP U ddress notation and lookup, presents the recommended method to determine the correct address and syntax for your data tag. fter all data is entered, click to continue. Once you have added all the data tags you want to log, you will be prompted to push the configuration to the router. Strideinx ndustrial VP Routers User anual 1st dition, Rev. -7

inx ppendix : Set Up ata Source Using OP U protocol The data tag entries should now be verified using the procedure described in the Test Utility subsection of hapter 4.

8 inx ppendix : Set Up ata Source Using OP U protocol The data tag entries should now be verified using the procedure described in the Test Utility subsection of hapter 4. OT: dditional data tag parameters related specifically to data logging (i.e., sampling interval, data retention policy, and logging only when changed) can be set from the loud ogging web app discussed in hapter 4. The loud ogging web app can now be used to set up data dashboards and to adjust additional data tag parameters related specifically to data logging, and the loud otify web app can be used to set up alarm notifications. xport data tags ata tag configurations can be exported in SV format. The SV file is downloaded to your local P, and can later be imported to set up another Strideinx router. Select data tags to be exported by clicking the icon for each data tag, or select all data tags at once from the ore Options (...) menu in the upper right corner of the screen. The selected data tags can then be deleted, duplicated, or exported from the pop up menu at the bottom of the screen. -8 Strideinx ndustrial VP Routers User anual 1st dition, Rev.

ppendix : Set Up ata Source Using OP U protocol OP U address notation and lookup We reccommend the Uaxpert client software (available from United utomation) to search for tags.

9 ppendix : Set Up ata Source Using OP U protocol OP U address notation and lookup We reccommend the Uaxpert client software (available from United utomation) to search for tags. fter installing and opening the Uaxpert software, complete the following actions to set up a connection with the OP U server: 1. lick the right mouse button on Servers at the top left. 2. lick dd Server. 3. lick dvanced. 4. nter the P-address and the port of the server and click Ok. fter the connection is made with the server, complete the following actions: 5. ind the tag in the address space in the bottom left. 6. Select the tag so its details are shown in the attribute window. The namespace and identifier are the important attributes here. n this example, the namespace and identifier are 2 and 20001, respectively. Thus, in this example the addressing of the data tag would look like this: ns=2;i= Strideinx ndustrial VP Routers User anual 1st dition, Rev. -9

10 inx ppendix : Set Up ata Source Using OP U protocol -10 Strideinx ndustrial VP Routers User anual 1st dition, Rev.

G Set up data source for a device using Siemens S7 protocol...g-2

G Set up data source for a device using Siemens S7 protocol...g-2 Set Up ata Source Using Siemens S7 protocol n this ppendix... ppendix Set up data source for a device using Siemens S7 protocol...-2 inx ppendix : Set Up ata Source Using Siemens S7 protocol Set up data