LNE/G-MED North America, Inc

Size: px
Start display at page:

Download "LNE/G-MED North America, Inc"

Transcription

1 LNE/G-MED North America, Inc Medical Device Usability: Highlights of European Regulations and the Latest Standards Do not distribute or reproduce without permission 1

2 Sara Jafari, Ph.D., Medical Device Certification Project Manager, Active Medical Devices LNE/G-MED North America, Inc. Do not distribute or reproduce without permission 2

3 Agenda Introduction Usability Usability and European Regulations and Standards Overview of Usability Standards and the latest changes Usability and Medical Device QMS Conclusion Do not distribute or reproduce without permission 3

4 Introduction Medical errors are one of the causes of mortality in hospitals Up to death annually in US attributed to medical errors Poor user interface design of medical devices lead to errors result in harm or death administration of incorrect medication or dose incorrect interpretation of data incorrect device setting for therapy Systematic and careful design of the user interface can reduce the likelihood of use/user error and improve the safety of medical devices. Do not distribute or reproduce without permission 4

5 What is Usability? Do not distribute or reproduce without permission 5

6 Usability Usability (ISO : Ergonomics of Human System Interaction, Guidance on Usability ): The extent to which a product can be used by specified users to achieve specified goals with effectiveness, efficiency and satisfaction in a specified context of use Special Context of Use Satisfac tion Specified Users Usability Efficiency Specified Goals Effectiv eness Do not distribute or reproduce without permission 6

7 What is Medical Device Usability? Do not distribute or reproduce without permission 7

8 Medical device Usability Standards: focus on usability as it relates to safety of the user interface of a medical device in development MD Usability : Characteristic MD Of the Usability User : Characteristic Interface Of the that User facilitate Interface that facilitate Use Use In the Intended Use Environment to perceive information presented by the User Interface to understand and make decision based on that information to interact with the medical device to achieve specified goals Do not distribute or reproduce without permission 8

9 Usability Engineering Do not distribute or reproduce without permission 9

10 Usability Engineering The application of knowledge about human behavior, abilities, limitations, and other characteristics to the design of medical devices including software, systems, tasks to achieve adequate usability. user correct use user interface Device Use use environment Use error Source: FDA Guidance, Applying UE to medical devices, Feb 2016 Usability Engineering and Human Factors engineering are treated as synonymous Do not distribute or reproduce without permission 10

11 European Medical Device Usability Requirements Do not distribute or reproduce without permission 11

12 Medical Device Directive 93/42/ EEC Annex I, Essential Requirements ER 1 The devices must be designed and manufactured in such a way that, when used under the conditions and for the purposes intended, they will not compromise the clinical condition or the safety of patients, or the safety and health of users or, where applicable, other persons.this shall include: reducing, as far as possible, the risk of use error due to the ergonomic features of the device and the environment in which the device is intended to be used (design for patient safety) consideration of the technical knowledge, experience, education and training and where applicable the medical and physical conditions of intended users (design for lay, professional, disabled or other users) Do not distribute or reproduce without permission 12

13 Medical Device Directive 93/42/ EEC Annex I, Essential Requirements ER 9.2 Devices must be designed and manufactured in such a way as to remove or minimize the risk of injury, in connection with physical features.appropriate ergonomic features ER 10.2 Devices with a measuring function: The measurement, monitoring and display scale must be designed in line with ergonomic principles, taking account of the intended purpose of the device ER 13.1 each device must be accompanied by the information needed to use it safely and properly, taking account of the training and knowledge of the potential users ER 2, ER 3, ER 6, ER , ER 12.8 and ER 12.9 Do not distribute or reproduce without permission 13

14 European Regulation (EU) 2017/745 ANNEX I, General Requirements GR 5: In eliminating or reducing risks related to use error, the manufacturer shall:(a) reduce as far as possible the risks related to the ergonomic features of the device and the environment in which the device is intended to be used (design for patient safety) GR 14.2: Devices shall be designed and manufactured in such a way as to remove or reduce as far as possible: (a) the risk of injury, in connection with their physical features, including the volume/pressure ratio, dimensional and where appropriate ergonomic features GR 14.6: Any measurement, monitoring or display scale shall be designed and manufactured in line with ergonomic principles, taking account of the intended purpose, users and the environmental conditions in which the devices are intended to be used Do not distribute or reproduce without permission 14

15 Harmonized Standards & Official Journal of the European Union Do not distribute or reproduce without permission 15

16 Usability Standard for Medical Device Markets in EU EN 62366:2008 Medical devices - Application of Usability Engineering to Medical Devices : A process based standard for analysis, design, verification and validation of usability through the development cycle of the medical devices as it relates to their safety Adopted from the international standard, IEC :2007 (withdrawn) Do not distribute or reproduce without permission 16

17 Usability Standards for Medical Devices IEC 62366/A1: 2014 IEC :2015 & IEC :2016 Withdrawn IEC 62366:2007 Withdrawn IEC 62366:2007 /Amd1:2014 IEC :2015 & IEC :2016 Medical Electrical Equipment: IEC : 2010 (Usability Standard EN :2010) collateral standard reference EN Do not distribute or reproduce without permission 17

18 Overview of IEC :2015 Do not distribute or reproduce without permission 18

19 IEC :2015 (Part 1) Application of usability engineering to medical devices Focusing on the usability engineering as a design and development process for the medical device user interface to identify and reduce the possibility of use errors and use associated risks Streamline the Usability Engineering process Strength the link with ISO 14971:2007 This part of the standard targets only the safety-related part of the usability of medical devices Not harmonized yet Recognized by the FDA as of August 2015 in replacement of IEC 62366:2007 Do not distribute or reproduce without permission 19

20 IEC :2015, Overview 1. Body of Standard Scope Normative References Terms and Definitions Principles Usability Engineering Process 2. Informative annexes A : General Guidance and rationale B : Examples D : Types of MD use and examples E : Reference to essential principles 3. Normative annex C : UOUP Usability Engineering process allows the manufacturer to assess and mitigate risk associated with correct use and use errors, i.e., normal use Do not distribute or reproduce without permission 20

21 IEC/TR :2016 (Part 2) efficient ways to implement elements required by IEC : 2015 does not contain any requirements intended to be read in conjunction with IEC :2015 How document Do not distribute or reproduce without permission 21

22 What is Usability Engineering Process Do not distribute or reproduce without permission 22

23 Usability Engineering Process Provide safety for the patient, user and others related to usability Mitigates risks caused by usability problems associated with correct use and use errors Helps manufacturer to discover hazards and hazardous situations related to the user interface design and implement measures to control the risks related to the user interface evaluate the risk control measures Do not distribute or reproduce without permission 23

24 Risk Management and Usability: Application of Risk management to medical devices (ISO 14971:2007, EN ISO 14971:2012) is normatively referenced in IEC :2015, EN 62366:2008 and is essential for its application Risk management: decision making process to determine acceptable risks Usability Engineering: design and development process, evaluate the usability and mitigate the use errors that could results in risks for medical devices Do not distribute or reproduce without permission 24

25 Usability engineering process (IEC : 2015) Risk Management ( ISO 14971:2007) Intended medical indication, Patient population, part of body, user profile, use environment, operating principle Prepare Use Specification (5.1) Do not distribute or reproduce without permission 25

26 Usability engineering process (IEC : 2015) Risk Management ( ISO 14971:2007) Intended medical indication, Patient population, part of body, user profile, use environment, operating principle Prepare Use Specification (5.1) Intended Use (4.2) Analysis/Interface Specifications Identify user interface characteristics related to safety and potential use errors (5.2) Identify known or foreseeable hazards and hazardous situations (5.3) Identify and describe hazardrelated use scenarios (5.4) Select the hazard-related use scenarios for summative evaluation (5.5) Establish User Interface Specification (5.6) Identify characteristics related to safety (4.2) Identify hazards and sequences of events leading to hazardous situation(4.3, 4.4) Do not distribute or reproduce without permission 26

27 Usability engineering process (IEC : 2015) Risk Management ( ISO 14971:2007) Interface design and Formative evaluation Establish User Interface evaluation Plan (5.7) Perform user interface design, implementation and formative evaluation(5.8) summative evaluation Perform summative evaluation of the usability of the user interface (5.9) No improvement necessary Evaluation of residual risk (6.4) evaluate overall residual risk acceptability, complete RM report and Review production and post marker information Do not distribute or reproduce without permission 27

28 IEC :2015 changes comparing to EN 62366:2008 Do not distribute or reproduce without permission 28

29 User Interface of Unknown Provenance IEC :2015 changes comparing to EN 62366:2008 EN : 2008 IEC 62366/A1: 2014 IEC :2015 No reference to UOUP Annex K Annex C User Interface of Unknown Provenance (UOUP) Ex. interface of a previously designed medical device for which records of the user interface process are not available Documentation of use specifications and main service functions Post-production information Review Risk management file review Review of accompanying documents Do not distribute or reproduce without permission 29

30 IEC :2015 changes comparing to EN 62366:2008 Added Removed Removed Formative Evaluation and Summative Evaluation Frequently Used Functions Usability Verification Annexes Number of informative annexes reduced to 4. Do not distribute or reproduce without permission 30

31 IEC :2015 changes comparing to EN 62366:2008 Cl : General requirements for personal competency regarding usability engineering activities is added Cl : Specification of requirements of risk control related to user interface design: a 3-level approach as required by EN ISO 14971:2007 Cl. 4.3: Specification of elements tailoring the usability engineering effort such as complexity of user interface and use specification, severity of the harm, extend or complexity of use specification and presence of User Interface of Unknown Provenance Do not distribute or reproduce without permission 31

32 IEC :2015 changes comparing to EN 62366:2008 Cl. 5.2: Clarification of requirements to identify user interface characteristics related to safety and use errors Cl. 5.3: Specification of elements to consider during the identification of hazardous situation such as use specification, existing user interface and use errors Cl. 5.4 & 5.5: Identification of use scenarios that could lead to harm and considering them during summative evaluation Cl 5.6: Clarification of user interface specification requirements: consideration hazard related scenarios, determination of the necessity of accompanying documents and training Do not distribute or reproduce without permission 32

33 IEC :2015 changes comparing to EN 62366:2008 Cl. 5.7: Specification of user interface evaluation plan (objectives and methods of any planned formative and summative evaluation) and documentation of usability test parameters (users, environment, documentation, training) Cl. 5.8 & 5.9: Evaluation of user interface: design, implementation and formative evaluation (iteratively during design and development process to explore unanticipated use errors), summative evaluation (at the end of user interface development, part of verification and validation of the overall medical device design to conclude that User Interface can be used safely) Do not distribute or reproduce without permission 33

34 Usability and Medical Device Quality Management System Do not distribute or reproduce without permission 34

35 Usability & Medical device Quality Management System (EN ISO 13485:2016) Cl a : Usability and safety requirements according to the intended use shall be determined and recorded as an input for design and development Cl : Significant of the change to usability for medical devices and its intended use shall be determined as part of control of design & development changes Do not distribute or reproduce without permission 35

36 Outcome/Documentation Do not distribute or reproduce without permission 36

37 Outcome/Documentation EN 62366:2008, IEC :2015: all aspects of Usability Engineering process should be documented in a Usability Engineering File Usability Engineering File: an independent file part of risk management file part of product design file contain pointers and references to all required documents The Usability Engineering File enables efficient auditing of the design and development process Do not distribute or reproduce without permission 37

38 Conclusion European Usability Harmonized Standard EN 62366: 2008 International Usability Standard also recognized by FDA: IEC :2015 & IEC :2016 Inadequate medical device usability causes use error which can result to harm or death Adequate usability could be achieved through Usability Engineering process Usability activities should be conducted throughout all phases of design and development of medical devices Do not distribute or reproduce without permission 38

39 For more information: LNE/Gmed Newsletter Medical Device Usability: Highlights of European Regulations and Standards Do not distribute or reproduce without permission 39

40 Thank You! LNE / G-MED North America, Inc. lne-america.com contact@lne-america.com Do not distribute or reproduce without permission 40

Medical Device Usability

Medical Device Usability Medical Device Usability David Adams Global Head, Active Medical Devices Add logo on slide 4 here Topics What is usability? Why usability is so important The regulatory requirements EN 62366 Usability

More information

2018. All rights reserved.

2018. All rights reserved. DOCUMENT: Future AAMI/IEC 62366-1:2015/Amendment 1, Medical devices Application of usability Engineering to medical devices Amendment 1 Public Review Draft Designation: AAMI/CDV-2 62366-1:2015/DAmd 1 AAMI

More information

The Human Touch: Develop a Patient-Centric Injection Device

The Human Touch: Develop a Patient-Centric Injection Device The Human Touch: Develop a Patient-Centric Injection Device Molly Story, PhD 27 September 2017 Photo credits: Why should we care about being patient-centric? The FDA tells us: Our drugs must be safe and

More information

Applying Human Factors to Medical Device Design

Applying Human Factors to Medical Device Design Applying Human Factors to Medical Device Design Standards and Guidelines MEDEC 2016 Tim Reeves, PhD CHFP About Tim Reeves Founder and Managing Director of Human Factors MD Inc. Ten- person human factors

More information

Mapping Your Success 2013 BSI Healthcare Roadshow: Mobile Health Software, Mobile Phones and Telemedicine Under the EU Approach

Mapping Your Success 2013 BSI Healthcare Roadshow: Mobile Health Software, Mobile Phones and Telemedicine Under the EU Approach Mapping Your Success 2013 BSI Healthcare Roadshow: Mobile Health Software, Mobile Phones and Telemedicine Under the EU Approach Telemedicine & mhealth Definition of Telemedicine: Use of telecommunication

More information

Regulatory Aspects of Digital Healthcare Solutions

Regulatory Aspects of Digital Healthcare Solutions Regulatory Aspects of Digital Healthcare Solutions TÜV SÜD Product Service GmbH Dr. Markus Siebert Rev. 02 / 2017 02.05.2017 TÜV SÜD Product Service GmbH Slide 1 Contents Digital solutions as Medical Device

More information

IEC/TR : (E)

IEC/TR : (E) IEC/TR 62366-2:2016-04 (E) Medical devices - Part 2: Guidance on the application of usability engineering to medical devices Contents Page FOREWORD... 6 INTRODUCTION... 8 1 Scope and purpose... 9 1.1 Scope...

More information

HUMAN CENTERED DESIGN

HUMAN CENTERED DESIGN HUMAN CENTERED DESIGN Ed Israelski PhD CHFP, Convener of Usability and Ergonomics Working Groups IEC/ISO Retired Director Human Factors, AbbVie Past Co-Chair HFE Committee, AAMI HFE Consultant Roundtable

More information

Consideration of Cybersecurity vs Safety Risk Management

Consideration of Cybersecurity vs Safety Risk Management Consideration of Cybersecurity vs Safety Risk Management Weiping Zhong, Ph.D. Global Director of Risk Management/Medical Devices GE Healthcare DISCLAIMER: The views and opinions expressed in this presentation

More information

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision

More information

GUIDE 63. Guide to the development and inclusion of safety aspects in International Standards for medical devices

GUIDE 63. Guide to the development and inclusion of safety aspects in International Standards for medical devices GUIDE 63 Guide to the development and inclusion of safety aspects in International Standards for medical devices Second edition 2012 ISO/IEC 2012 ISO/IEC GUIDE 63:2012(E) This is a preview - click here

More information

AUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY

AUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY Requirement specification Certification of individuals: AUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY Requirement specification Auditor Lead Auditor rev 5.docx Page 1 1 Introduction

More information

FDA Initiatives on Human Factors and Usability for Medical Devices Molly Follette Story, PhD FDA /CDRH / ODE

FDA Initiatives on Human Factors and Usability for Medical Devices Molly Follette Story, PhD FDA /CDRH / ODE FDA Initiatives on Human Factors and Usability for Medical Devices Molly Follette Story, PhD FDA /CDRH / ODE 2011 AMIA Pre-Symposium Washington, DC October 21, 2011 1 2 3 Regulatory Basis for HF at FDA

More information

April 28, Division of Dockets Management (HFA-305) Food and Drug Administration 5630 Fishers Lane, Room 1061 Rockville, MD 20852

April 28, Division of Dockets Management (HFA-305) Food and Drug Administration 5630 Fishers Lane, Room 1061 Rockville, MD 20852 701 Pennsylvania Avenue, NW Suite 800 Washington, D.C. 20004 2654 Tel: 202 783 8700 Fax: 202 783 8750 www.advamed.org Division of Dockets Management (HFA-305) Food and Drug Administration 5630 Fishers

More information

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision

More information

!"# $ # # $ $ % $ &% $ '"# $ ()&*&)+(( )+(( )

!# $ # # $ $ % $ &% $ '# $ ()&*&)+(( )+(( ) !"# # # % &% '"# ) !#, ' "# " "# -. / # 0 0 0 0 0 "0 "# " # 1 #! " " 0 0 0 0 0 0 2# 0 # # 3 ' 4 56 7-56 87 9# 5 6 7 6 & 0 " : 9 ; 4 " #! 0 - '% # % "# " "# " < 4 "! % " % 4 % % 9# 4 56 87 = 4 > 0 " %!#

More information

klinischen Datenanforderungen in Europa: Ist die Literaturroute noch möglich?

klinischen Datenanforderungen in Europa: Ist die Literaturroute noch möglich? Regulatorische Änderungen bei den klinischen Datenanforderungen in Europa: Ist die Literaturroute noch möglich? Hamburg, 30.09.2015 Dr. Bassil Akra Director Clinical Centre of Excellence TÜV SÜD Product

More information

March 20, Division of Dockets Management (HFA-305) Food and Drug Administration 5630 Fishers Lane, Room 1061 Rockville, MD 20852

March 20, Division of Dockets Management (HFA-305) Food and Drug Administration 5630 Fishers Lane, Room 1061 Rockville, MD 20852 701 Pennsylvania Avenue, NW Suite 800 Washington, D.C. 20004 2654 Tel: 202 783 8700 Fax: 202 783 8750 www.advamed.org March 20, 2017 Division of Dockets Management (HFA-305) Food and Drug Administration

More information

Copyright 2018 by Boston Scientific, Inc.. Permission granted to INCOSE to publish and use. #hwgsec

Copyright 2018 by Boston Scientific, Inc.. Permission granted to INCOSE to publish and use. #hwgsec Balancing Safety, Security and Usability in the Design of Secure Medical Devices Ken Hoyme Director, Product Security Boston Scientific Ken.hoyme@bsci.com Copyright 2018 by Boston Scientific, Inc.. Permission

More information

UDI in the MDR. Economic Operators The new regulations create Economic Operators who play a role in the UDI system.

UDI in the MDR. Economic Operators The new regulations create Economic Operators who play a role in the UDI system. UDI in the MDR The European Union intends to replace the existing directives related to medical device, Active Implantable Medical Devices, In Vitro Diagnostic Devices, and Medical Devices, with two regulations.

More information

Requirements on clinical data in Europe

Requirements on clinical data in Europe Requirements on clinical data in Europe Dr. Bassil Akra Director Global Clinical Affairs TÜV SÜD Product Service Current Medical Device Directives Applicable Directives Active Implantable Medical Devices

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 15223-2 First edition 2010-01-15 Medical devices Symbols to be used with medical device labels, labelling, and information to be supplied Part 2: Symbol development, selection

More information

ISO/IEC INTERNATIONAL STANDARD. Information technology Security techniques Information security risk management

ISO/IEC INTERNATIONAL STANDARD. Information technology Security techniques Information security risk management INTERNATIONAL STANDARD ISO/IEC 27005 First edition 2008-06-15 Information technology Security techniques Information security risk management Technologies de l'information Techniques de sécurité Gestion

More information

Risk Assessment Methodologies. Michele M. Silva Solution Architect, Safety & Security Functional Safety Engineer (TUV Rheinland)

Risk Assessment Methodologies. Michele M. Silva Solution Architect, Safety & Security Functional Safety Engineer (TUV Rheinland) Risk Assessment Methodologies Michele M. Silva Solution Architect, Safety & Security Functional Safety Engineer (TUV Rheinland) Agenda Introduction to Standards Functional Safety Design Process Risk Assessment

More information

POSTMARKET MANAGEMENT OF CYBERSECURITY IN MEDICAL DEVICES FINAL GUIDANCE MARCH 29, TH ANNUAL MEDICAL DEVICE QUALITY CONGRESS

POSTMARKET MANAGEMENT OF CYBERSECURITY IN MEDICAL DEVICES FINAL GUIDANCE MARCH 29, TH ANNUAL MEDICAL DEVICE QUALITY CONGRESS POSTMARKET MANAGEMENT OF CYBERSECURITY IN MEDICAL DEVICES FINAL GUIDANCE MARCH 29, 2017 14TH ANNUAL MEDICAL DEVICE QUALITY CONGRESS 1 Fact vs. Myth Let s Play: Fact vs. Myth The FDA is the federal entity

More information

Information technology Service management. Part 10: Concepts and vocabulary

Information technology Service management. Part 10: Concepts and vocabulary Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO/IEC 20000-10 First edition 2018-09 Information technology Service management Part 10: Concepts and vocabulary Technologies de l'information Gestion

More information

THINK THE FDA DOESN T CARE ABOUT USER EXPERIENCE FOR MOBILE MEDICAL APPLICATIONS? THINK AGAIN.

THINK THE FDA DOESN T CARE ABOUT USER EXPERIENCE FOR MOBILE MEDICAL APPLICATIONS? THINK AGAIN. THINK THE FDA DOESN T CARE ABOUT USER EXPERIENCE FOR MOBILE MEDICAL APPLICATIONS? THINK AGAIN. When granting regulatory approvals for medical devices, both IEC 62366 and the FDA have emphasized the importance

More information

The Role of Standards in Ensuring Toy Safety

The Role of Standards in Ensuring Toy Safety The Role of Standards in Ensuring Toy Safety Joan Lawrence Vice President, Standards and Regulatory Affairs and Chairman, Subcommittee on Toy Safety, ASTM International Lima, Peru November, 2013 Toy Industry

More information

PROOF/ÉPREUVE. Safety of machinery Relationship with ISO Part 1: How ISO relates to type-b and type-c standards

PROOF/ÉPREUVE. Safety of machinery Relationship with ISO Part 1: How ISO relates to type-b and type-c standards Provläsningsexemplar / Preview TECHNICAL REPORT ISO/TR 22100-1 First edition Safety of machinery Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-b and type-c standards Sécurité des machines

More information

GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES

GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES Table of Contents 1 PURPOSE... 2 2 GENERAL... 2 3 GUIDANCE AND INTERPRETATIVE DOCUMENTS... 2

More information

ISO INTERNATIONAL STANDARD. Ergonomic requirements for office work with visual display terminals (VDTs) Part 11: Guidance on usability

ISO INTERNATIONAL STANDARD. Ergonomic requirements for office work with visual display terminals (VDTs) Part 11: Guidance on usability INTERNATIONAL STANDARD ISO 9241-11 First edition 1998-03-15 Ergonomic requirements for office work with visual display terminals (VDTs) Part 11: Guidance on usability Exigences ergonomiques pour travail

More information

MEDICAL DEVICE CYBERSECURITY: FDA APPROACH

MEDICAL DEVICE CYBERSECURITY: FDA APPROACH MEDICAL DEVICE CYBERSECURITY: FDA APPROACH CYBERMED SUMMIT JUNE 9TH, 2017 SUZANNE B. SCHWARTZ, MD, MBA ASSOCIATE DIRECTOR FOR SCIENCE & STRATEGIC PARTNERSHIPS CENTER FOR DEVICES AND RADIOLOGICAL HEALTH

More information

4.2.2 Usability. 4 Medical software from the idea to the finished product. Figure 4.3 Verification/validation of the usability, SW = software

4.2.2 Usability. 4 Medical software from the idea to the finished product. Figure 4.3 Verification/validation of the usability, SW = software 4.2.2 Usability Intended purpose, Market Validation Usability Usability Risk analysis and measures Specification of the overall system SW SW architecture/ of SW SW design Software design & integration

More information

Directive on security of network and information systems (NIS): State of Play

Directive on security of network and information systems (NIS): State of Play Directive on security of network and information systems (NIS): State of Play Svetlana Schuster Unit H1 Cybersecurity and Digital Privacy DG Communications Networks, Content and Technology, European Commission

More information

Conformity assessment Requirements for bodies providing audit and certification of management systems. Part 6:

Conformity assessment Requirements for bodies providing audit and certification of management systems. Part 6: TECHNICAL SPECIFICATION ISO/IEC TS 17021-6 First edition 2014-12-01 Conformity assessment Requirements for bodies providing audit and certification of management systems Part 6: Competence requirements

More information

Standard Glossary of Terms used in Software Testing. Version 3.2. Foundation Extension - Usability Terms

Standard Glossary of Terms used in Software Testing. Version 3.2. Foundation Extension - Usability Terms Standard Glossary of Terms used in Software Testing Version 3.2 Foundation Extension - Usability Terms International Software Testing Qualifications Board Copyright Notice This document may be copied in

More information

Acceptance Checklist for Special 510(k)

Acceptance Checklist for Special 510(k) Acceptance Checklist for Special 510(k)s (should be completed within 15 days of DCC receipt) The following information is not intended to serve as a comprehensive review. 510(k) Number: Date Received by

More information

Quality Assurance and esecurity

Quality Assurance and esecurity Ministère de l Economie, de l Industrie et de l Emploi Department for Economy, Industry and Employment Quality Assurance and esecurity Claude DAULAUD In-vehicle Communication, Telematics and Co-operative

More information

Working with Health IT Systems is available under a Creative Commons Attribution-NonCommercial- ShareAlike 3.0 Unported license.

Working with Health IT Systems is available under a Creative Commons Attribution-NonCommercial- ShareAlike 3.0 Unported license. Working with Health IT Systems is available under a Creative Commons Attribution-NonCommercial- ShareAlike 3.0 Unported license. Johns Hopkins University. Welcome to Quality Improvement: Data Quality Improvement.

More information

Summary of Changes in ISO 9001:2008

Summary of Changes in ISO 9001:2008 s in ISO 9001:2008 Clause 0.1 Introduction General Added the phrase its organizational environment, changes in that environment, or risks associated with that environment, to the first paragraph Created

More information

Base Standard Program ISO Medical Device CB Application for Accreditation

Base Standard Program ISO Medical Device CB Application for Accreditation Base Standard Program ISO 13485 Medical Device CB Application for Accreditation FA 5006 Authority: Accreditation Manager Effective: 2016/11/11 Section 1: CB Name, Contact Information, and Processing Fees

More information

International Pharmaceutical Aerosol Consortium on Regulation and Science

International Pharmaceutical Aerosol Consortium on Regulation and Science International Pharmaceutical Aerosol Consortium on Regulation and Science 1500 K Street NW Washington DC 20005 Telephone +1 202 230 5607 Fax +1 202 842 8465 Email info@ipacrs.org Web www.ipacrs.org August

More information

Guidelines 1/2018 on certification and identifying certification criteria in accordance with Articles 42 and 43 of the Regulation 2016/679

Guidelines 1/2018 on certification and identifying certification criteria in accordance with Articles 42 and 43 of the Regulation 2016/679 Guidelines 1/2018 on certification and identifying certification criteria in accordance with Articles 42 and 43 of the Regulation 2016/679 Adopted on 25 May 2018 Contents 1. Introduction... 2 1.1. Scope

More information

EXAM PREPARATION GUIDE

EXAM PREPARATION GUIDE When Recognition Matters EXAM PREPARATION GUIDE PECB Certified Management System Auditor www.pecb.com The objective of the PECB Certified Management System Auditor examination is to ensure that the candidates

More information

Below we ve highlighted several of the key points from the final guidance document.

Below we ve highlighted several of the key points from the final guidance document. On September 6, 2017, the Food and Drug Administration (FDA or the Agency) released its final guidance document, Design Considerations and Pre-Market Submission Recommendations for Interoperable Medical

More information

EA-7/05 - EA Guidance on the Application of ISO/IEC 17021:2006 for Combined Audits

EA-7/05 - EA Guidance on the Application of ISO/IEC 17021:2006 for Combined Audits Publication Reference EA-7/05 EA Guidance on the Application of ISO/IEC 17021:2006 for Combined Audits PURPOSE This document has been prepared by a task force under the direction of the European Cooperation

More information

_isms_27001_fnd_en_sample_set01_v2, Group A

_isms_27001_fnd_en_sample_set01_v2, Group A 1) What is correct with respect to the PDCA cycle? a) PDCA describes the characteristics of information to be maintained in the context of information security. (0%) b) The structure of the ISO/IEC 27001

More information

CEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act''

CEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act'' CEN Identification number in the EC register: 63623305522-13 CENELEC Identification number in the EC register: 58258552517-56 CEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act''

More information

Designing Secure Medical Devices

Designing Secure Medical Devices Rick Brooks Director of Systems, Software, and Electrical Engineering Designing Secure Medical Devices 1 Copyright 2018 Battelle Memorial Institute. Permission granted to INCOSE to publish and use. About

More information

Final Document. Points to Consider in the use of the IMDRF Table of Content for Medical Device Submissions pre-rps

Final Document. Points to Consider in the use of the IMDRF Table of Content for Medical Device Submissions pre-rps Final Document Title: Points to Consider in the use of the IMDRF Table of Content for Medical Device Submissions pre-rps Authoring Group: IMDRF RPS ToC Working Group Date 30 June 2014 Jeffrey Shuren, IMDRF

More information

INAB Mandatory and Guidance Documents Policy and Index

INAB Mandatory and Guidance Documents Policy and Index INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such

More information

Standards: Implementation, Certification and Testing Work group Friday, May 8, :00 Pm-1:30 Pm ET.

Standards: Implementation, Certification and Testing Work group Friday, May 8, :00 Pm-1:30 Pm ET. Standards: Implementation, Certification and Testing Work group Friday, May 8, 2015. 12:00 Pm-1:30 Pm ET. Agenda Complete Work group Comments- Group 1 Review Group 2 Comments. 2015 Edition Certification

More information

ISO/IEC INTERNATIONAL STANDARD

ISO/IEC INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO/IEC 27006 Second edition 2011-12-01 Information technology Security techniques Requirements for bodies providing audit and certification of information security management systems

More information

JUST WHAT THE DOCTOR ORDERED: A SOLUTION FOR SMARTER THERAPEUTIC DEVICES PLACEHOLDER IMAGE INNOVATORS START HERE.

JUST WHAT THE DOCTOR ORDERED: A SOLUTION FOR SMARTER THERAPEUTIC DEVICES PLACEHOLDER IMAGE INNOVATORS START HERE. JUST WHAT THE DOCTOR ORDERED: A SOLUTION FOR SMARTER THERAPEUTIC DEVICES PLACEHOLDER IMAGE INNOVATORS START HERE. EXECUTIVE SUMMARY There s little question that advances in therapeutic technologies have

More information

List of EA Publications. And International. Documents

List of EA Publications. And International. Documents EA/INF-01 List of EA Publications and International Documents Publication Reference EA-INF/01: 2018 List of EA Publications And International Documents PURPOSE This gives the list of EA documents to be

More information

Accreditation Bodies in other

Accreditation Bodies in other Accreditation Bodies in other WHO Regions Jeanette Twell 6July2011 Overview ILAC Accreditation International Standards vs Guidance Auditing (NATA) EQAS/Proficiency Testing Take home message 2 International

More information

Hazardous Locations. Product Certification Solutions

Hazardous Locations. Product Certification Solutions Hazardous Locations Product Certification Solutions 2 Designing and manufacturing products for hazardous locations is a complex environment to navigate, with many requirements for certification. To achieve

More information

ISO/IEC TS Conformity assessment Guidelines for determining the duration of management system certification audits

ISO/IEC TS Conformity assessment Guidelines for determining the duration of management system certification audits TECHNICAL SPECIFICATION ISO/IEC TS 17023 First edition 2013-08-01 Conformity assessment Guidelines for determining the duration of management system certification audits Évaluation de la conformité Lignes

More information

IAF Mandatory Document KNOWLEDGE REQUIREMENTS FOR ACCREDITATION BODY PERSONNEL FOR INFORMATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001)

IAF Mandatory Document KNOWLEDGE REQUIREMENTS FOR ACCREDITATION BODY PERSONNEL FOR INFORMATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001) IAF Mandatory Document KNOWLEDGE REQUIREMENTS FOR ACCREDITATION BODY PERSONNEL FOR INFORMATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001) (IAF MD 13:2015) Issue 1 IAF MD - Knowledge Requirements for Accreditation

More information

ISO/IEC This is a preview - click here to buy the full publication INTERNATIONAL STANDARD. First edition

ISO/IEC This is a preview - click here to buy the full publication INTERNATIONAL STANDARD. First edition INTERNATIONAL STANDARD ISO/IEC 25062 First edition 2006-04-01 Corrected version 2006-10-01 Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Common Industry Format (CIF)

More information

ARTICLE 29 DATA PROTECTION WORKING PARTY

ARTICLE 29 DATA PROTECTION WORKING PARTY ARTICLE 29 DATA PROTECTION WORKING PARTY 18/EN WP261 Article 29 Working Party Draft Guidelines on the accreditation of certification bodies under Regulation (EU) 2016/679 Adopted on 6 february 2018 1 THE

More information

Medical Device Cybersecurity: FDA Perspective

Medical Device Cybersecurity: FDA Perspective Medical Device Cybersecurity: FDA Perspective Suzanne B. Schwartz MD, MBA Associate Director for Science and Strategic Partnerships Office of the Center Director (OCD) Center for Devices and Radiological

More information

ISO : Competence Requirements Clause 7

ISO : Competence Requirements Clause 7 ISO 17021 : 2011 Competence Requirements Clause 7 3 Terms and definitions 3.7 Competence Ability to apply knowledge and skills to achieve intended results 3 Terms and definitions 3.10 Technical area Area

More information

Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY

Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY December 2015 (Version 3) 1 Contents 1. Introduction... 5 2. Criteria for approval of a Certification Body... 5 3. Selection of audit team members

More information

IVDR Breakout. Copyright 2017 BSI. All rights reserved.

IVDR Breakout. Copyright 2017 BSI. All rights reserved. IVDR Breakout 1 IVDR Classification and conformity assessment 2 Classification- IVDR 3 Classification of IVDs Re-classification of IVDs will mean 80-90 % will no longer be able to self certify conformity

More information

Final Report of TF-CS/OTA

Final Report of TF-CS/OTA Submitted by the Secretary of the UN Task Force on Cyber Security and Over-the-Air issues Informal document GRVA-01-19 1st GRVA, 25-28 September 2018 Agenda item 6 (b) Final Report of TF-CS/OTA United

More information

Med-Info. Council Directive 93/42/EEC on medical devices. TÜV SÜD Product Service GmbH

Med-Info. Council Directive 93/42/EEC on medical devices. TÜV SÜD Product Service GmbH Med-Info International expert information for the medical device industry Council Directive 93/42/E on medical devices Practice-oriented summary of the most important aspects and requirements contained

More information

ISO INTERNATIONAL STANDARD. Ergonomic design of control centres Part 2: Principles for the arrangement of control suites

ISO INTERNATIONAL STANDARD. Ergonomic design of control centres Part 2: Principles for the arrangement of control suites INTERNATIONAL STANDARD ISO 11064-2 First edition 2000-12-15 Ergonomic design of control centres Part 2: Principles for the arrangement of control suites Conception ergonomique des centres de commande Partie

More information

Section Qualifications of Audit teams Qualifications of Auditors Maintenance and Improvement of Competence...

Section Qualifications of Audit teams Qualifications of Auditors Maintenance and Improvement of Competence... Section 9. SFI 2010-2014 Audit Procedures and Auditor Qualifications and Accreditation Updated January 2011 Section 9 Introduction... 3 1. Scope... 3 2. Normative Reference... 3 3. Terms and Definitions...

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO/IEC 90003 First edition 2004-02-15 Software engineering Guidelines for the application of ISO 9001:2000 to computer software Ingénierie du logiciel Lignes directrices pour l'application

More information

Provläsningsexemplar / Preview. Medical devices Part 2: Guidance on the application of usability engineering to medical devices

Provläsningsexemplar / Preview. Medical devices Part 2: Guidance on the application of usability engineering to medical devices IEC TR 62366-2 TECHNICAL REPORT Edition 1.0 2016-04 colour inside Medical devices Part 2: Guidance on the application of usability engineering to medical devices IEC TR 62366-2:2016-04(en) THIS PUBLICATION

More information

USING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY

USING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY Ref. Ares(2014)2675967-13/08/2014 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Regulaty policy Regulaty Approach f the free movement of goods NOTE TO THE SENIOR OFFICIALS GROUP ON STANDARDISATION

More information

Inter American Accreditation Cooperation. IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations

Inter American Accreditation Cooperation. IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations CLASSIFICATION This document is classified as an IAAC Mandatory Document. AUTHORIZATION Issue Nº: 07 Prepared by: MLA Committee and

More information

Report of analysis of training programs in the field of QMS from EU partners - POLAND

Report of analysis of training programs in the field of QMS from EU partners - POLAND Improvement of Partnership with Enterprises by Enhancement of a Regional Quality Management Potentials in WBC University of Montenegro, Cetinjska 2, 81000 Podgorica, Montenegro www.ucg.ac.me e-mail: rektorat@ac.me,

More information

DriveGuard. Safe-Off Option for PowerFlex 70 AC Drives. User Manual.

DriveGuard. Safe-Off Option for PowerFlex 70 AC Drives. User Manual. DriveGuard Safe-Off Option for PowerFlex 70 AC Drives User Manual www.abpowerflex.com Important User Information Solid state equipment has operational characteristics differing from those of electromechanical

More information

Accreditation programme for management systems certification bodies NAR IRT Edition 2

Accreditation programme for management systems certification bodies NAR IRT Edition 2 Accreditation programme for management systems certification bodies NAR-01-04-IRT Edition 2 Approved by: Csaba Bodroghelyi Deputy Director General Responsible for preparation: Consistency of content reviewed

More information

FDA & Medical Device Cybersecurity

FDA & Medical Device Cybersecurity FDA & Medical Device Cybersecurity Closing Keynote, February 19, 2017 Suzanne B. Schwartz, M.D., MBA Associate Director for Science & Strategic Partnerships Center for Devices and Radiological Health US

More information

The National Medical Device Information Sharing & Analysis Organization (MD-ISAO) Initiative Session 2, February 19, 2017 Moderator: Suzanne

The National Medical Device Information Sharing & Analysis Organization (MD-ISAO) Initiative Session 2, February 19, 2017 Moderator: Suzanne The National Medical Device Information Sharing & Analysis Organization (MD-ISAO) Initiative Session 2, February 19, 2017 Moderator: Suzanne Schwartz, Assoc. Dir., CDRH, FDA Denise Anderson, MBA, President,

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO/IEC/ IEEE 90003 First edition 2018-11 Software engineering Guidelines for the application of ISO 9001:2015 to computer software Ingénierie du logiciel Lignes directrices pour

More information

Human Factors Usability in the Review of New Medical Devices FDA/CDRH. Considering Usability for Pharmaceutical Aerosol Devices.

Human Factors Usability in the Review of New Medical Devices FDA/CDRH. Considering Usability for Pharmaceutical Aerosol Devices. Human Factors Usability in the Review of New Medical Devices FDA/CDRH Considering Usability for Pharmaceutical Aerosol Devices Ron Kaye Human Factors Pre-Market Evaluation Team Leader Office of Device

More information

Med-Info. Council Directive 93/42/EEC on medical devices. TÜV SÜD Product Service GmbH

Med-Info. Council Directive 93/42/EEC on medical devices. TÜV SÜD Product Service GmbH Med-Info International expert information for the medical device industry Council Directive 93/42/E on medical devices Practice-oriented summary of the most important aspects and requirements contained

More information

CRITERIA FOR CERTIFICATION BODY ACCREDITATION IN THE FIELD OF RISK BASED INSPECTION MANAGEMENT SYSTEMS

CRITERIA FOR CERTIFICATION BODY ACCREDITATION IN THE FIELD OF RISK BASED INSPECTION MANAGEMENT SYSTEMS CRITERIA FOR CERTIFICATION BODY ACCREDITATION IN THE FIELD OF RISK BASED INSPECTION MANAGEMENT SYSTEMS Approved By: Executive: Accreditation: Mpho Phaloane Revised By: RBI STC Working Group Members Date

More information

INAB Mandatory and Guidance Documents Policy and Index

INAB Mandatory and Guidance Documents Policy and Index INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such

More information

Inhalt. Description of Certification Procedure ISO 22000, HACCP and DIN 15593

Inhalt. Description of Certification Procedure ISO 22000, HACCP and DIN 15593 Inhalt 1. CERTIFICATION PROCEDURE... 2 1.1 Audit Preparation... 2 1.2 Audit Stage 1... 2 1.3 Audit Stage 2 Certification Audit... 3 1.4. Issue of Certificate... 3 2. SURVEILLANCE AUDIT... 3 3. RECERTIFICATION

More information

Product Development for Medical, Life Sciences, and Consumer Health

Product Development for Medical, Life Sciences, and Consumer Health Product Development for Medical, Life Sciences, and Consumer Health Fundamentals of Usability Testing for FDA Validation MassMEDIC April 8, 2010 Beth Loring Director of Research and Usability 2 Topics

More information

Ergonomics of human-system interaction Part 220: Processes for enabling, executing and assessing human-centred design within organizations

Ergonomics of human-system interaction Part 220: Processes for enabling, executing and assessing human-centred design within organizations ISO/IEC 2015 All rights reserved ISO TC 159/SC4/WG6 N505 Date: 2015-03-12 ISO CD 9241-220.2 ISO TC 159/SC4/WG6 Secretariat: Ergonomics of human-system interaction Part 220: Processes for enabling, executing

More information

Minimum Requirements For The Operation of Management System Certification Bodies

Minimum Requirements For The Operation of Management System Certification Bodies ETHIOPIAN NATIONAL ACCREDITATION OFFICE Minimum Requirements For The Operation of Management System Certification Bodies April 2011 Page 1 of 11 No. Content Page 1. Introduction 2 2. Scope 2 3. Definitions

More information

ISO INTERNATIONAL STANDARD. Health informatics Service architecture Part 3: Computational viewpoint

ISO INTERNATIONAL STANDARD. Health informatics Service architecture Part 3: Computational viewpoint INTERNATIONAL STANDARD ISO 12967-3 First edition 2009-08-15 Health informatics Service architecture Part 3: Computational viewpoint Informatique de santé Architecture de service Partie 3: Point de vue

More information

KENYA ACCREDITATION SERVICE

KENYA ACCREDITATION SERVICE KENAS-GUD-010 01 22/06/2013 22/07/2013 GUD 1 of 9 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role Signature

More information

The Accreditation and Verification Regulation - Verification report

The Accreditation and Verification Regulation - Verification report EUROPEAN COMMISSION DIRECTORATE-GENERAL CLIMATE ACTION Directorate A - International and Climate Strategy CLIMA.A.3 - Monitoring, Reporting, Verification Guidance Document The Accreditation and Verification

More information

MassMEDIC s 21st Annual Conference

MassMEDIC s 21st Annual Conference MassMEDIC s 21st Annual Conference Panel Discussion Moderators: William Greenrose and Mutahar Shamsi, Deloitte & Touche LLP May 3, 2017 Three critical regulatory issues facing MedTech Implementing the

More information

Part 5: Requirements for ABs FOOD SAFETY SYSTEM CERTIFICATION Part V: Requirements for Accreditation Bodies

Part 5: Requirements for ABs FOOD SAFETY SYSTEM CERTIFICATION Part V: Requirements for Accreditation Bodies Part 5: Requirements for ABs FOOD SAFETY SYSTEM CERTIFICATION 22000 Part V: Requirements for Accreditation Bodies Version 4.1: July 2017 Part V: Requirements for Accreditation Bodies Contents 1 Purpose...

More information

Information technology Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC :2011

Information technology Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC :2011 TECHNICAL REPORT ISO/IEC TR 90006 First edition 2013-11-01 Information technology Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011

More information

Medical Device Vulnerability Management

Medical Device Vulnerability Management Medical Device Vulnerability Management MDISS / NH-ISAC Process Draft Dale Nordenberg, MD June 2015 Market-based public health: collaborative acceleration Objectives Define a trusted and repeatable process

More information

Summary of PIC/S Guidance Good Practices for Data Management and Integrity in Regulated GMP/GDP Environments

Summary of PIC/S Guidance Good Practices for Data Management and Integrity in Regulated GMP/GDP Environments www.rx-360.org Summary of PIC/S Guidance Good Practices for Data Management and Integrity in Regulated GMP/GDP Environments Draft Published August 2016 This summary was prepared by the Rx-360 Monitoring

More information

WEBINAR on the new Medical Device Regulation One-stop testing, inspection, certification and training solutions. TÜV SÜD Product Service

WEBINAR on the new Medical Device Regulation One-stop testing, inspection, certification and training solutions. TÜV SÜD Product Service WEBINAR on the new Medical Device Regulation 2017-07-12 One-stop testing, inspection, certification and training solutions TÜV SÜD Product Service TÜV SÜD at a glance 150+ YEARS OF QUALITY, SAFETY & SUSTAINABILITY

More information

AS/NZS ISO/IEC 17067:2015

AS/NZS ISO/IEC 17067:2015 Australian/New Zealand Standard AS/NZS ISO/IEC 17067:2015 (ISO/IEC 17067:2013, IDT) Conformity assessment Fundamentals of product certification and guidelines for product certification schemes AS/NZS ISO/IEC

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD ISO/IEC 11801-4 INTERNATIONAL STANDARD Edition 1.0 2017-11 Information technology Generic cabling for customer premises Part 4: Single-tenant homes INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 35.200

More information

Base Standard Program ISO Trustworthy Digital Repositories MS CB Application for Accreditation

Base Standard Program ISO Trustworthy Digital Repositories MS CB Application for Accreditation Base Standard Program ISO 16363 Trustworthy Digital Repositories MS CB Application for Accreditation FA 5041 Authority: Accreditation Manager Effective: 2017/08/25 Section 1: CB Name, Contact Information,

More information

Certification Requirements Competency-based Occupational Health & Safety Management Systems (OHSMS) Certification Program

Certification Requirements Competency-based Occupational Health & Safety Management Systems (OHSMS) Certification Program Certification Requirements Competency-based Occupational Health & Safety Management Systems (OHSMS) Certification Program Exemplar Global Personnel Certification Programs Exemplar Global is accredited

More information