Technical Publications

Transcription

1 Technical Publications LOGIQ E9 CONFORMANCE STATEMENT for DICOM Do not duplicate Copyright 2011 By GE Healthcare

2 REVISION HISTORY Revision Date Description Author 1 Draft May 27 th, 2008 Dominick Anggara Creation of the document. 05/27/ June 7 th, 2008 Address Issues From Document Review Dominick Anggara 2 Oct 30 th, 2008 Update based on Review comments Dominick Anggara 3 Draft 05/03/09 June 3 rd, 2009 Update DICOM SR IOD Implementation for Vascular Ultrasound Report Dominick Anggara 3 Draft Sept 18 th, 2009 Dominick Anggara Update for Break Through /18/09 3 Oct 13 th, 2009 Update based on Review comments and Dominick Anggara Release document for Break Through Draft October 11, 2010 Draft for BT11 review Charlie Guttenberg 4 October 17, 2010 Updated with review feedback and released Charlie Guttenberg for BT11 5 Draft April 12, 2011 Resolved SPR # FBUG (Section Gopi Pattaswamy 7.4, Table viii.2 and Table viii.3) 5 June 8, 2011 Updated with review feedback and released Gopi Pattaswamy June 27 th 2011 Removed support for Kanji character Gopi Pattaswamy 6 set(section 3.7) and corrected Series description support(table 4-4)

3 CONFORMANCE STATEMENT OVERVIEW The LOGIQ E9 is a self-contained networked computer system used for acquiring ultrasound diagnostic medical images. The system implements the necessary DICOM services to download worklists from an information system, save acquired US images to a network storage device or media, print to a networked hardcopy device, query and move US images from a networked storage and inform the information system about the work actually done. The system conforms to the DICOM standard to allow the sharing of medical information with other digital imaging systems. Table A.1 provides an overview of the network services supported by LOGIQ E9. Table A.1 Network Services SOP Classes User of Service (SCU) Provider of Service (SCP) Transfer Verification Yes Yes US Image Storage Yes Yes US Multi-frame Storage Yes Yes US Image Storage (retired) Yes Yes US Multi-frame Storage (retired) Yes Yes Secondary Capture Image Storage Yes Yes CT Image Storage Yes Yes MR Image Storage Yes Yes MG Image Storage Yes Yes PET Image Storage Yes Yes Query/Retrieve Study Root Q/R FIND Yes No Study Root Q/R MOVE Yes No Print Management Basic Grayscale Print Management Yes No Basic Color Print Management Yes No Basic Annotation Box Yes No Workflow Management Modality Worklist Yes No Modality Performed Procedure Yes No Storage Commitment Push Model Yes No Notes, Reports, Measurements Transfer Comprehensive SR Storage Yes No Key Object Selection Storage Yes No Table A.2 provides an overview of the Media Storage Application Profile supported by LOGIQ E9. Table A.2 Media Services Media Storage Augmented Profile Write Files (FSC or FSU) Compact Disk - R General Purpose CD-R Yes Yes DVD General Purpose DVD Yes Yes Read Files (FSR) i

4 TABLE OF CONTENTS 1. INTRODUCTION OVERVIEW OVERALL DICOM CONFORMANCE STATEMENT DOCUMENT STRUCTURE INTENDED AUDIENCE SCOPE AND FIELD OF APPLICATION IMPORTANT REMARKS REFERENCES DEFINITIONS SYMBOLS AND ABBREVIATIONS NETWORK CONFORMANCE STATEMENT INTRODUCTION IMPLEMENTATION MODEL Application Data Flow Diagram Functional Definition of AE's Sequencing of Real-World Activities AE SPECIFICATIONS LOGIQ E9 AE Specification COMMUNICATION PROFILES Supported Communication Stacks (PS 3.8, PS 3.9) TCP/IP Stack EXTENSIONS / SPECIALIZATIONS / PRIVATIZATIONS CONFIGURATION AE Title/Presentation Address Mapping Configurable Parameters SUPPORT OF EXTENDED CHARACTER SETS CODES AND CONTROLLED TERMINOLOGY Fixed Coded Terminology SECURITY PROFILES MEDIA STORAGE CONFORMANCE STATEMENT INTRODUCTION IMPLEMENTATION MODEL Application Data Flow Diagram Functional Definition of AE s ii

5 3.2.3 Sequencing Requirements File Meta Information Options (See PS3.10) AE SPECIFICATIONS LOGIQ E9 AE Specification AUGMENTED AND PRIVATE APPLICATION PROFILES EXTENSIONS, SPECIALIZATIONS, PRIVATIZATIONS OF SOP CLASSES AND TRANSFER SYNTAXES CONFIGURATION SUPPORT OF EXTENDED CHARACTER SETS Annex A - ULTRASOUND (US) INFORMATION OBJECT IMPLEMENTATION INTRODUCTION IOD MODULE TABLE INFORMATION MODULE DEFINITIONS Common Patient Entity Modules Common Study Entity Modules Common Series Entity Modules Common Equipment Entity Modules Common Image Entity Modules General Modules US Modules Annex B ULTRASOUND MULTIFRAME (US MF) INFORMATION OBJECT IMPLEMENTATION INTRODUCTION IOD MODULE TABLE INFORMATION MODULE DEFINITIONS Common Image Modules Annex C - SC INFORMATION OBJECT IMPLEMENTATION INTRODUCTION IOD MODULE TABLE INFORMATION MODULE DEFINITIONS SC Modules Annex D - SR INFORMATION OBJECT IMPLEMENTATION INTRODUCTION IOD MODULE TABLE INFORMATION MODULE DEFINITIONS SR Document Series Module SR Document General Module SR Document Content Module iii

6 7.4 STANDARD EXTENDED AND PRIVATE DATA ATTRIBUTES STANDARD EXTENDED AND PRIVATE CONTEXT GROUPS STANDARD EXTENDED AND PRIVATE TEMPLATES Standard Extended Templates Private Templates Annex E - BASIC DIRECTORY INFORMATION OBJECT IMPLEMENTATION INTRODUCTION IOD MODULE TABLE INFORMATION MODULE DEFINITIONS Common File Set identification Modules Common Directory Information Modules Definition of Specific Directory Records PRIVATE DATA DICTIONARY Annex F - MODALITY WORKLIST INFORMATION MODEL DEFINITION INTRODUCTION MODALITY WORKLIST INFORMATION MODEL DESCRIPTION MODALITY WORKLIST INFORMATION MODEL ENTITY-RELATIONSHIP MODEL Entity Descriptions LOGIQ E9 Mapping of DICOM entities INFORMATION MODEL MODULE TABLE INFORMATION MODEL KEYS Supported Matching Scheduled Procedure Step Entity Requested Procedure Entity Imaging Service Request Entity Visit Entity Patient Entity Annex g MODALITY PERFORMED PROCEDURE STEP SOP CLASS IMPLEMENTATION INTRODUCTION MODALITY PERFORMED PROCEDURE STEP SOP CLASS DEFINITION IOD Description Operations Annex H - STORAGE COMMITMENT PUSH MODEL SOP CLASS IMPLEMENTATION INTRODUCTION IMPLEMENTATION MODEL Application data flow diagram Action Information Notifications iv

7 12. Annex I PRINT MANAGEMENT SOP CLASS IMPLEMENTATION INTRODUCTION BASIC PRINT MANAGEMENT META SOP CLASSES Basic Grayscale Print Management Meta SOP Class Basic Color Print Management Meta SOP Class PRINT MANAGEMENT SOP CLASS DEFINITIONS Basic Film Session SOP Class Basic Film Box SOP Class Image Box SOP Class Printer SOP Class Basic Annotation Box SOP Class PRINT MANAGEMENT IODS Film Session IOD Module Basic Film Box IOD Module Table Basic Image Box IOD Module Table Printer IOD Module Table Basic Annotation IOD Module Table INFORMATION MODULE DEFINITIONS General Modules Print Management Modules Annex J Key Object Selection Document INFORMATION OBJECT IMPLEMENTATION INTRODUCTION IOD MODULE TABLE INFORMATION MODULE DEFINITIONS Key Object Document Series Module Key Object Document Module v

8 1. INTRODUCTION 1.1 OVERVIEW This DICOM Conformance Statement is divided into these Sections: Section 1 (Introduction), which describes the overall structure, intent, and references for this Conformance Statement Section 2 (Network Conformance Statement), which specifies the GEMS equipment compliance to the DICOM requirements for the implementation of Networking features. Section 3 (Media Storage Conformance Statement), which specifies the GEMS equipment compliance to the DICOM requirements for the implementation of Media Storage features. Section 4 (Ultrasound Information Object Implementation), which specifies the GEMS equipment compliance to DICOM requirements for the implementation of an Ultrasound Medicine Information Object. Section 5 (Ultrasound Multi-Frame Information Object Implementation), which specifies the GEMS equipment compliance to DICOM requirements for the implementation of an Ultrasound Multi-Frame Information. Section 6 (SC Object Implementation), which specifies the GEMS equipment compliance to DICOM requirements for the implementation of a Secondary Capture Information Object. Section 7 (SR Object Implementation), which specifies the GEMS equipment compliance to DICOM requirements for the implementation of a Comprehensive Structured Reporting Information Object. Section 8 (Basic Directory Information Object Implementation), which specifies the GEMS equipment compliance to DICOM requirements for the implementation of a Basic Directory Information Object. Section 9 (Modality Worklist Information Model), which specifies the GEMS equipment compliance to DICOM requirements for the implementation of the Modality Worklist service. Section 10 (Modality Performed Procedure Step SOP Class Definition), which specifies the GEMS equipment compliance to DICOM requirements for the implementation of Modality Performed Procedure Step Service. Section 11 (Storage Commitment Push Model SOP Class Definition), which specifies the GEMS equipment compliance to DICOM requirements for the implementation of the Storage Commitment Push Model Service. Section 12 (Basic Print Meta SOP Class Information Object Implementation), which specifies the GEMS equipment compliance to DICOM requirements for the implementation of Basic Print Meta SOP Classes (Gray and Color). Section 13 (Key Object Selection Document Implementation), which specifies the GEMS equipment compliance to DICOM requirements for the implementation of a Key Object Selection Document Information Object. 1

9 1.2 OVERALL DICOM CONFORMANCE STATEMENT DOCUMENT STRUCTURE The Documentation Structure of the GEMS Conformance Statements and their relationship with the DICOM Conformance Statements is shown in the Illustration below. ID/Net v3.0 Introduction to the Integrated DICOM/Network v3.0 (ID/Net v3.0) Conformance Statement Direction: APPLICATION ENTITY SPECIFICATION (SERVICE CLASSES, INFORMATION OBJECTS, MESSAGE EXCHANGES, ETC.) Product Implementation: CT Advantage Conformance MR Advantage Statement Conformance LOGIQ Direction: Statement E9 Conformance Direction: Statement Direction :... Conformance Statement Direction:... DICOM STANDARD Standard Specification: DICOM Part 1 DICOM Part 2 DICOM Part 3 DICOM Part 4 DICOM Part 16 2

10 This document specifies the DICOM implementation. It is entitled: LOGIQ E9 version 3 Conformance Statement for DICOM This DICOM Conformance Statement documents the DICOM Conformance Statement and Technical Specification required to interoperate with the GEMS network interface. Introductory information, which is applicable to all GEMS Conformance Statements, is described in the document: Introduction to the Integrated DICOM/Network v3.0 (ID/Net v3.0) Conformance Statement Direction: This Introduction familiarizes the reader with DICOM terminology and general concepts. It should be read prior to reading the individual products' GEMS Conformance Statements. The GEMS Conformance Statement, contained in this document, also specifies the Lower Layer communications, which it supports (e.g. TCP/IP). However, the Technical Specifications are defined in the DICOM Part 8 standard. For more information including Network Architecture and basic DICOM concepts, please refer to the Introduction. For more information regarding DICOM, copies of the Standard may be obtained on the Internet at Comments on the Standard may be addressed to: DICOM Secretariat NEMA 1300 N. 17 th Street, Suite 1847 Rosslyn, VA USA Phone: INTENDED AUDIENCE The reader of this document is concerned with software design and/or system integration issues. It is assumed that the reader of this document is familiar with the DICOM Standards and with the terminology and concepts, which are used in those Standards. If readers are unfamiliar with DICOM terminology they should first refer to the document listed below, then read the DICOM Standard itself, prior to reading this DICOM Conformance Statement document. Introduction to the Integrated DICOM/Network v3.0 (ID/Net v3.0) Conformance Statement Direction: SCOPE AND FIELD OF APPLICATION It is the intent of this document, in conjunction with the Introduction to the Integrated DICOM/Network v3.0 (ID/Net v3.0) Conformance Statement, Direction: , to provide an unambiguous specification for GEMS implementations. This specification, called a Conformance Statement, includes a DICOM Conformance Statement and is necessary to ensure proper processing and interpretation of GEMS medical data exchanged using DICOM. The GEMS Conformance Statements are available to the public. The reader of this DICOM Conformance Statement should be aware that different GEMS devices are capable of using different Information Object Definitions. For example, a GEMS CT Scanner may send images using the CT Information Object, MR Information Object, Secondary Capture Object, etc. 3

11 Included in this DICOM Conformance Statement are the Module Definitions, which define all data elements, used by this GEMS implementation. If the user encounters unspecified private data elements while parsing a GEMS Data Set, the user is well advised to ignore those data elements (per the DICOM standard). Unspecified private data element information is subject to change without notice. If, however, the device is acting as a full fidelity storage device, it should retain and re-transmit all of the private data elements that are sent by GEMS devices. 1.5 IMPORTANT REMARKS The use of these DICOM Conformance Statements, in conjunction with the DICOM Standards, is intended to facilitate communication with GE imaging equipment. However, by itself, it is not sufficient to ensure that inter-operation will be successful. The user (or user's agent) needs to proceed with caution and address at least four issues: Integration - The integration of any device into an overall system of interconnected devices goes beyond the scope of standards (DICOM), and of this introduction and associated DICOM Conformance Statements when interoperability with non-ge equipment is desired. The responsibility to analyze the applications requirements and to design a solution that integrates GE imaging equipment with non-ge systems is the user's responsibility and should not be underestimated. The user is strongly advised to ensure that such an integration analysis is correctly performed. 1.6 REFERENCES Validation - Testing the complete range of possible interactions between any GE device and non-ge devices, before the connection is declared operational, should not be overlooked. Therefore, the user should ensure that any non-ge provider accepts full responsibility for all validation required for their connection with GE devices. This includes the accuracy of the image data once it has crossed the interface between the GE imaging equipment and the non-ge device and the stability of the image data for the intended applications. Such a validation is required before any clinical use (diagnosis and/or treatment) is performed. It applies when images acquired on GE imaging equipment are processed/displayed on a non-ge device, as well as when images acquired on non-ge equipment is processed/displayed on a GE console or workstation. Future Evolution - GE understands that the DICOM Standard will evolve to meet the user's growing requirements. GE is actively involved in the development of the DICOM Standard. DICOM will incorporate new features and technologies and GE may follow the evolution of the Standard. The GEMS protocol is based on DICOM as specified in each DICOM Conformance Statement. Evolution of the Standard may require changes to devices, which have implemented DICOM. In addition, GE reserves the right to discontinue or make changes to the support of communications features (on its products) reflected on by these DICOM Conformance Statements. The user should ensure that any non-ge provider, which connects with GE devices, also plans for the future evolution of the DICOM Standard. Failure to do so will likely result in the loss of function and/or connectivity as the DICOM Standard changes and GE Products are enhanced to support these changes. Interaction - It is the sole responsibility of the non-ge provider to ensure that communication with the interfaced equipment does not cause degradation of GE imaging equipment performance and/or function. A list of references, which is applicable to all GEMS Conformance Statements, is included in the Introduction to the Integrated DICOM/Network v3.0 (ID/Net v3.0) Conformance Statement, Direction: The information object implementation refers to DICOM PS 3.3 (Information Object Definition). 1.7 DEFINITIONS A set of definitions, which is applicable to all GEMS Conformance Statements, is included in the Introduction to the Integrated DICOM/Network v3.0 (ID/Net v3.0) Conformance Statement, Direction:

12 1.8 SYMBOLS AND ABBREVIATIONS A list of symbols and abbreviations, which is applicable to all GEMS Conformance Statements, is included in the Introduction to the Integrated DICOM/Network v3.0 (ID/Net v3.0) Conformance Statement, Direction:

13 2. NETWORK CONFORMANCE STATEMENT 2.1 INTRODUCTION This section of the DICOM Conformance Statement specifies the compliance to DICOM conformance requirements for the relevant Networking features for LOGIQ E9 Software version 2.0. Note that the format of this section strictly follows the format defined in DICOM Standard PS 3.2 (Conformance). Please refer to that part of the standard while reading this section. LOGIQ E9 is an Ultrasound scanner running on a commercial computer. It allows for the following DICOM functionality: Sending and receiving Echo messages to and from DICOM Verification SCP and client. Exporting DICOM images, key object selection document and structured reports to a DICOM SCP. Saving the DICOM images to DICOM media format. Browsing and viewing DICOM images on DICOM media format. Querying and retrieving DICOM Modality Worklist from a Worklist SCP. Sending start and end of examination to a DICOM Modality Performed Procedure Step SCP. Sending storage commitment requests (and receiving replies) to a DICOM Storage Commitment SCP. Printing images to a DICOM Printer. Querying and retrieving examinations from a DICOM Query/Retrieve SCP. 2.2 IMPLEMENTATION MODEL Application Data Flow Diagram The Basic and Specific Application models for this device are shown in the following illustration: 6

14 DICOM Standard Interface Association Initiation & Acceptance Remote Verification SCU/SCP Echo Modality Worklist SCP Worklist Query Modality PPS SCP Instance Store/End Exam LOGIQ E9 Remote Retrieve SCP Remote Storage SCP Exam Save Storage Commitment SCP Image Print Remote Print SCP Exam Query/ Retrieve Query/ Retrieve SCP 7

15 There are six local real-world activities that occur in LOGIQ E9 - Exam Save, Echo, Worklist Query, Image Store/End Exam, Image Print and Exam Query/Retrieve Exam save initiates a connection with the DICOM SCP and transmits images and reports to the DICOM SCP. If Storage Commitment is configured a commitment request will be sent for the images and reports. Echo initiates a connection with the DICOM SCP, posts a Verification request and closes the connection. It also responds to incoming Verification requests (for service use). Worklist Query initiates a connection with the DICOM SCP, performs a query and retrieves the matching entries to the product. Image Store/End exam: If Modality Performed Procedure Step is configured N-CREATE and N-SET messages will be sent for the exam. Image Print will send images to a DICOM Print SCP. Exam Query/Retrieve initiates a connection with the DICOM SCP, performs a query and retrieves selected examination Functional Definition of AE's Application Entity LOGIQ E9 supports the following functions: Initiates a DICOM association to send images and reports. Transmits DICOM images, key object selection document and reports to the DICOM Storage SCP. Initiates a DICOM verification to assist in network diagnostics. Responds to DICOM verification requests from other devices. Initiates a DICOM worklist query to receive worklist information. Initiates a DICOM association to notify start of examination. Initiates a DICOM association to notify end of examination. Initiates a DICOM association to request storage commitment of images. Responds to replies for storage commitment requests of images. Initiates a DICOM association to print images. Initiates a DICOM association to query for and retrieve examinations. Responds to replies for examination retrieve requests Sequencing of Real-World Activities Not applicable. 2.3 AE SPECIFICATIONS LOGIQ E9 AE Specification This Application Entity provides Standard Conformance to the following DICOM SOP Classes as an SCU: SOP Class Name SOP Class UID Ultrasound Multi-frame Image Storage

16 Ultrasound Multi-frame Image Storage (Retired) Ultrasound Image Storage Ultrasound Image Storage (Retired) Secondary Capture Image Storage Verification SOP Class Modality Worklist Information Model - FIND Modality Performed Procedure Step SOP Class Storage Commitment Push Model SOP Class Basic Grayscale Print Management Meta SOP Class Basic Color Print Management Meta SOP Class Basic Annotation Box SOP Class Study Root Query/Retrieve Information Model FIND Study Root Query/Retrieve Information Model MOVE Comprehensive Structured Report Storage Key Object Selection Document Storage CT Image Storage MR Image Storage Digital Mammography Storage For Presentation Positron Emission Tomography Image Storage This Application Entity provides Standard Conformance to the following DICOM SOP Classes as an SCP: SOP Class Name SOP Class UID Verification SOP Class Ultrasound Multi-frame Image Storage Ultrasound Multi-frame Image Storage (Retired) Ultrasound Image Storage Ultrasound Image Storage (Retired) Secondary Capture Image Storage

17 CT Image Storage MR Image Storage Digital Mammography Storage For Presentation Positron Emission Tomography Image Storage Association Establishment Policies General The DICOM Application Context Name (ACN), which is always proposed, is: Application Context Name The Maximum Length PDU negotiation is included in all association establishment requests. The maximum length PDU for an association initiated by LOGIQ E9 is: Maximum Length PDU The maximum length PDU is a fixed number - not configurable. The SOP Class Extended Negotiation is not supported. The user information Items sent by this product are: Maximum PDU Length Implementation UID Implementation Version Name Number of Associations The LOGIQ E9 AE will initiate multiple DICOM associations. The maximum numbers of associations are based on the connectivity service configuration Asynchronous Nature Asynchronous mode is not supported. All operations will be performed synchronously Implementation Identifying Information The Implementation UID for this DICOM Implementation is: LOGIQ E9 Implementation UID The Implementation Version Name for this DICOM Implementation is: LOGIQ E9 Implementation Version Name LOGIQ E9 Note: The Implementation Version Name may change in the future without modification of this document. 10

18 Association Initiation Policy The LOGIQ E9 AE attempts to establish a new association with a remote device due to six Real-World Activities: Exam save initiated by the operator for images, key object selection document and structured reports and sending request for Storage Commitment. Verification, which verifies application level communication between peer DICOM AE s for service purposes. Worklist initiated by the operator for receiving worklist information. Image Store/End Exam sending messages to Modality Performed Procedure Step. Print initiated by the operator for a specific image or group of images. Exam Query/Retrieve initiated by the operator for receiving examination information and selecting examination to retrieve Real-World Activity A ( Exam save Operation) Associated Real-World Activity Upon a request by the operator (manual or automatic), images will be sent to a DICOM Storage SCP Proposed Presentation Context Tables The Proposed Presentation Context Table depends on compression according to the following table: Presentation Context Table Proposed Abstract Syntax Transfer Syntax Role Extended Negotiation Name UID Name List UID List Presentation Context Table: Compression set to None Secondary Capture Image Storage Ultrasound Image Storage Ultrasound Multiframe Image Storage Ultrasound Image Storage (retired) Ultrasound Multiframe Image Storage (retired) Explicit VR Little Endian Implicit VR Little Endian Explicit VR Little Endian Implicit VR Little Endian Explicit VR Little Endian Implicit VR Little Endian Explicit VR Little Endian Implicit VR Little Endian Explicit VR Little Endian Implicit VR Little Endian CT Image Storage Explicit VR Little Endian Implicit VR Little Endian MR Image Storage Explicit VR Little Endian Implicit VR Little Endian Digital Mammography Explicit VR Little Endian Storage For Implicit VR Little Endian Presentation Positron Emission Tomography Image Storage Explicit VR Little Endian Implicit VR Little Endian Presentation Context Table: Compression set to RLE Secondary Capture Image Storage Ultrasound Image Storage Run Length Encoding Explicit VR Little Endian Implicit VR Little Endian Run Length Encoding Explicit VR Little Endian Implicit VR Little Endian SCU SCU SCU SCU SCU SCU SCU SCU SCU SCU SCU None None None None None None None None None None None

19 Ultrasound Multiframe Image Storage Ultrasound Image Storage (retired) Ultrasound Multiframe Image Storage (retired) Run Length Encoding Explicit VR Little Endian Implicit VR Little Endian Run Length Encoding Explicit VR Little Endian Implicit VR Little Endian Run Length Encoding Explicit VR Little Endian Implicit VR Little Endian Presentation Context Table: Compression set to JPEG Secondary Capture Image Storage Ultrasound Image Storage Ultrasound Multiframe Image Storage Ultrasound Image Storage Ultrasound Multiframe Image Storage (retired) JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) JPEG 2000 Lossless JPEG 2000 Lossy Presentation Context Table for Structured Reports Comprehensive Structured Report Explicit VR Little Endian Implicit VR Little Endian Presentation Context Table for Key Object Selection Document Key Object Selection Document Explicit VR Little Endian Implicit VR Little Endian SCU SCU SCU SCU SCU SCU SCU SCU SCU SCU None None None None None None None None None None SOP Specific DICOM Conformance Statement for all Storage SOP Classes This operation also sends a Storage Commitment Request, with the following proposed presentation context. The result from the SCP is expected on another association for the Storage Commitment result. Presentation Context Table Proposed Abstract Syntax Transfer Syntax Role Extended Negotiation Name UID Name List UID List Storage Commitment Push Model SOP Class Explicit VR Little Endian Implicit VR Little Endian SCU None For these SOP class all status codes with status Refused or Error are treated as failures and terminate the association and operation. On a failure, the request will be put in a holding queue for the user to manually retry the request. All status codes with status Warning or Success are treated as successes. 12

20 Real-World Activity B ( Echo Operation) Associated Real-World Activity The user may initiate a DICOM Verification Request in the config screen. Associations will be released upon the receipt of each C-ECHO confirmation. In the event that the SCP does not respond for some reason, the operation will time out and LOGIQ E9 will close the association Proposed Presentation Context Table Presentation Context Table - Proposed Abstract Syntax Transfer Syntax Role Extended Negotiation Name UID Name List UID List Verification SOP Class Explicit VR Little Endian Implicit VR Little Endian SCU None Real-World Activity C ( Worklist Query Operation) Associated Real-World Activity The user may initiate a DICOM Worklist Query in Search screen, which will send a C-FIND-RQ to the Worklist SCP. Associations will be released upon the receipt of C-FIND-RSP confirmation Proposed Presentation Context Tables Presentation Context Table Proposed Abstract Syntax Transfer Syntax Role Extended Negotiation Name UID Name List UID List Modality Worklist Information Model FIND Explicit VR Little Endian Implicit VR Little Endian SOP Specific DICOM Conformance Statement for Worklist SOP Classes SCU None The LOGIQ E9 includes matching keys in the Modality Worklist queries as described in Section 9.5. All status codes with status Refused or Error are treated as failures and terminate the association and operation. On a failure, the user will be informed and the last successful query will be used as Worklist. All status codes with status Warning or Success are treated as successes. Service Status Status Code Further Meaning Application Behavior When receiving Status Codes Refused A700 Out of resources Terminate the association and operation 0122 SOP Class not Supported Terminate the association and operation Related Fields Processed if received (0000,0902) (0000,0902) 13

21 Failed A900 Identifier does not match SOP Class Terminate the association and operation Cxxx Unable to process Terminate the association and operation Success 0000 Matching is complete No final identifier is supplied Pending FF00 Matches are continuing Receiving process of the Current Match is matches continues. supplied and any Optional Keys were supported in the same manner FF01 Matches are continuing Warning that one or more Optional Keys were not supported for existence for this Identifier Receiving process of the matches continues without any warnings or errors (0000, 0901) (0000, 0902) (0000,0901) (0000,0902) None Identifier Identifier Real-World Activity D ( Image Store/End exam Operation) Associated Real-World Activity The Modality Performed Procedure Step messages are sent when the first image is acquired for the start of an exam and when the exam is ended (for the case where there are no images, the N-CREATE is sent when the exam is ended). For an exam with saved images or results, the N-SET will be sent with status COMPLETED. For an exam without saved images or results, the N-SET will be sent with status DISCONTINUED Proposed Presentation Context Table Presentation Context Table Proposed Abstract Syntax Transfer Syntax Role Extended Name UID Name List UID List Negotiation Modality Performed Procedure Step SOP Class Explicit VR Little Endian Implicit VR Little Endian SOP Specific DICOM Conformance Statement for Modality Performed Procedure Step Class LOGIQ E9 includes attributes in the Modality Performed Procedure Step N-CREATE and N-SET as described in Section LOGIQ E9 includes attributes in the Modality Performed Procedure Step N-SET as described in Section The mapping from Worklist attributes is described in Section 9.5.LOGIQ E9 sends N-SET after the exam is ended. The N-SET will include all acquired images UIDs and the status of COMPLETED or DISCONTINUED. For this SOP class, all status codes with status Refused or Error are treated as failures and terminate the association and operation. All status codes with status Warning or Success are treated as successes. SCU None 14

22 Real-World Activity E ( Image Print Operation) Associated Real-World Activity Upon a request by the operator, print jobs will be sent to a DICOM Print SCP. If an error occurs during the transmission, the current association is released and a new association initiated. The maximum number of retries is configurable Proposed Presentation Context Tables The following table is used: Presentation Context Table - Proposed Abstract Syntax Transfer Syntax Role Extended Name UID Name List UID List Negotiation Basic Grayscale Print Management Meta SOP Class Basic Color Print Management Meta SOP Class Basic Annotation Box SOP Class Explicit VR Little Endian Implicit VR Little Endian Explicit VR Little Endian Implicit VR Little Endian Explicit VR Little Endian Implicit VR Little Endian SCU SCU SCU None None None SOP Specific DICOM Conformance Statement for all Print Management SOP Classes All status codes with status Refused or Error are treated as failures and terminate the association and operation. All status codes with status Warning or Success are treated as successes Real-World Activity F ( Exam Query Operation) Associated Real-World Activity The user may initiate a DICOM Exam Query in Search screen, which will send a C-FIND-RQ to the Query/Retrieve SCP. Associations will be released upon the receipt of C-FIND-RSP confirmation. The user may then select an examination to be retrieved, using the C-MOVE-RQ command to the Query/Retrieve SCP. The result from the SCP is expected on another association for the retrieved examinations Proposed Presentation Context Tables Presentation Context Table Proposed Abstract Syntax Transfer Syntax Role Extended Negotiation Name UID Name List UID List Study Root Query/Retrieve Information Model - FIND Study Root Query/Retrieve Information Model - MOVE Explicit VR Little Endian Implicit VR Little Endian Explicit VR Little Endian Implicit VR Little Endian SCU SCU None None 15

23 SOP Specific DICOM Conformance Statement for Study Root Query/Retrieve Information Model - FIND SOP Classes Only a single information model, Study Root, is supported. All queries are initiated at the highest level of the information model (the STUDY level), and then for each response received, recursively repeated at the next lower levels (the SERIES and then IMAGE levels). CANCEL requests can be issued during the queries via graphical user interface. All status codes with status Refused or Error are treated as failures and terminate the association and operation. All status codes with status Warning or Success are treated as successes. LOGIQ E9 will only support hierarchical query. STUDY ROOT REQUEST IDENTIFIER FOR QUERY Name Tag Types of Matching STUDY Level Study Date (0008,0020) R (Filter is supported) Study Time (0008,0030) R Accession Number (0008,0050) *, S, U (Filter is supported) Patient's Name (0010,0010) *, U (Filter is supported) Patient ID (0010,0020) *, U (Filter is supported) Study ID (0020,0010) S,*, U Study Instance UID (0020,000D) UNIQUE Modalities in Study (0008,0061) S,*, U Referring Physician's Name (0008,0090) S,*, U Study Description (0008,1030) S,*, U (Filter is supported) Procedure Code Sequence (0008,1032) U Name of Physician(s) Reading (0008,1060) U Study Admitting Diagnoses Description (0008,1080) U Referenced Study Sequence (0008,1110) U Referenced Patient Sequence (0008,1120) U Patient's Birth Date (0010,0030) R Patient's Birth Time (0010,0032) R Patient's Sex (0010,0040) S, U Other Patient IDs (0010,1000) U Other Patient Names (0010,1001) U Patient s Age (0010,1010) U Patient s Size (0010,1020) U Patient s Weight (0010,1030) U Ethnic Group (0010,2160) U Occupation (0010,2180) U Additional Patient History (0010,21B0) U Patient Comments (0010,4000) U Other Study Numbers (0020,1070) U Number of Patient Related (0020,1200) U Studies Number of Patient Related Series (0020,1202) U Number of Patient Related (0020,1204) U Instances Number of Study Related Series (0020,1206) U 16

24 Number of Study Related (0020,1208) U Instances Interpretation Author (4008,010C) U Series Level Modality (0008,0060) U Series Number (0020,0011) U Series Instance UID (0020,000E) UNIQUE Number of Series Related (0020,1209) U Instances Series Date (0008,0021) R Series Time (0008,0031) R Performing Physicians Name (0008,1050) U Protocol Name (0018,1030) U Series Description (0008,103E) U Operator s Name (0008,1070) U Institutional Department Name (0008,1040) U Software Versions (0018,1020) U Performed Procedure Step Start (0040,0244) R Date Performed Procedure Step Start (0040,0245) R Time Image Level Instance Number (0020,0013) U SOP Instance UID (0008,0018) UNIQUE Contrast/Bolus Agent (0018,0010) U Types of Matching: Single Value matching (S) Universal Matching (U) Wild Card Matching (*) Range of date, Range of Time (R) The types of Matching supported by the C-FIND SCU are: S indicates the identifier attribute uses Single Value Matching, an R indicates Range Matching, a * indicates wildcard matching, a U indicates Universal Matching, and UNIQUE indicates that this is the Unique Key for that query level, in which case Universal Matching or Single Value Matching is used depending on the query level. Filtering is supported means that matching strings can be controlled from the Search screen at Data Transfer. All other matching fields can be configured in Config screen to be either enabled, enabled with a matching string value or disabled. The constant value will be used as entered by user SOP Specific DICOM Conformance Statement for Study Root Query/Retrieve Information Model - MOVE SOP Classes All status codes with status Refused or Error are treated as failures and terminate the association and operation. All status codes with status Warning or Success are treated as successes Association Acceptance Policy The AE accepts an association when it receives a Verification Request from another network device or a store request from a Q/R SCP or a Storage Commitment result from a Storage Commitment SCP Real-World Activity B ( Echo operation) 17

25 Associated Real-World Activity An incoming Verification Request will cause the AE to accept the association and respond with a Verification Response Accepted Presentation Context Table Presentation Context Table - Accepted Abstract Syntax Transfer Syntax Role Extended Name UID Name List UID List Negotiation Verification SOP Class Explicit VR Little Endian Implicit VR Little Endian SCP None SOP Specific DICOM Conformance Statement for Verify SOP Class The AE provides standard conformance to the Verification SOP Class as an SCP. The port number used is configured on config screen, default is Presentation Context Acceptance Criterion No criterion Transfer Syntax Selection Policies The selected transfer syntax is based on the proposed transfer syntax list. The priority order is Explicit VR Little Endian and Implicit VR Little Endian Real-World Activity F ( Exam Retrieve Operation) Associated Real-World Activity If the user has initiated a retrieve by a C-MOVE-RQ, the AE will accept associations for C-STORE- RQs. The images will be stored locally Accepted Presentation Context Table Abstract Syntax Transfer Syntax Role Extended Negotiati on Name UID Name List UID List Ultrasound Image Storage JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) Exp VR Little Endian Imp VR Little Endian Run Length Encoding SCP None 18

26 Ultrasound Multiframe Image Storage JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) Exp VR Little Endian Imp VR Little Endian Run Length Encoding SCP None Ultrasound Image Storage (retired) JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) Exp VR Little Endian Imp VR Little Endian Run Length Encoding SCP None Ultrasound Multiframe Image Storage (retired) Secondary Capture Image Storage JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) Exp VR Little Endian Imp VR Little Endian Run Length Encoding CT Image Storage MR Image Storage Digital Mammography Storage For Presentation JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) Exp VR Little Endian Imp VR Little Endian Run Length Encoding JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) Exp VR Little Endian Imp VR Little Endian Run Length Encoding JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) Exp VR Little Endian Imp VR Little Endian Run Length Encoding JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) Exp VR Little Endian Imp VR Little Endian Run Length Encoding SCP SCP SCP SCP SCP None None None None None 19

27 Positron Emission Tomography Image Storage JPEG 2000 Lossless JPEG 2000 Lossy JPEG Baseline JPEG Lossless Non Hierarchical (Proc 14) Exp VR Little Endian Imp VR Little Endian Run Length Encoding SCP None SOP Specific DICOM Conformance Statement for Storage SOP Classes The AE provides standard conformance to the Storage SOP Classes as an SCP. The port number used is configured in Config screen, default is 104. Below are all possible status codes which LOGIQ E9 would send upon storage request. Service Status Status Code Conditions Failed Cxxx Processing Error Success 0000 SOP Instance is stored successfully Presentation Context Acceptance Criterion No criterion Transfer Syntax Selection Policies The selected transfer syntax is based on the proposed transfer syntax list. The priority order is JPEG2000 Lossless, JPEG2000 Lossy, JPEG Lossless Non Hierarchical, JPEG Baseline, Run Length Encoding (RLE), Explicit VR Little Endian, and Implicit VR Little Endian Real-World Activity A ( Exam save Operation) Associated Real-World Activity LOGIQ E9 will only listen for an N-EVENT-REPORT (Storage Commitment Result) from a Storage Commitment SCP in a new association Proposed Presentation Context Tables The Proposed Presentation Context Table depends on compression according to the following table: Presentation Context Table Proposed Abstract Syntax Transfer Syntax Role Extended Name UID Name List UID List Negotiation Storage Commitment Push Model SOP Class Explicit VR Little Endian Implicit VR Little Endian SCU None 20

28 SOP Specific DICOM Conformance Statement for the Storage Commitment Push Model SOP Class SCU LOGIQ E9 will only accept the SCU role (which must be proposed via SCP/SCU Role Selection Negotiation) within a Presentation Context for the Storage Commitment Push Model SOP Class. The result from the SCP is expected on another association for the Storage Commitment result. The LOGIQ E9 behavior after receiving an N-EVENT-REPORT (Storage Commitment Result) is described in Section Below are all possible status codes which LOGIQE9 would send upon N- EVENT-REPORT request as EVENT-REPORT response. Service Status Status Code Conditions Failed 0110H Processing Error Success 0000 N-Even Report received successfully. 2.4 COMMUNICATION PROFILES Supported Communication Stacks (PS 3.8, PS 3.9) DICOM Upper Layer (PS 3.8) is supported using TCP/IP TCP/IP Stack The TCP/IP stack is inherited from the product s operating system. Please refer to product documentation for more information API Not applicable to this product. 2.5 EXTENSIONS / SPECIALIZATIONS / PRIVATIZATIONS If so configured, the product will send ultrasound raw data information in private data elements designated by the Private Creator element: Element Name Tag VR VM Description Private Creator 7FE1,00xx LO 1 GEMS_Ultrasound_MovieGroup_001 This means that all private tags starting with 7FE1,xx will belong to the GEMS_Ultrasound_MovieGroup_001. If so configured, the product will send preview image in private data elements designated by the Private Creator element: Element Name Tag VR VM Description Private Creator 6003,00xx LO 1 This means that all private tags starting with 6003,xx will belong to the GEMS_Ultrasound_ImageGroup_001. GEMS_Ultrasound_ImageGroup_001 21

29 2.6 CONFIGURATION AE Title/Presentation Address Mapping The Local AE title is configurable through the Config screen, see below Configurable Parameters Network: Local IP address Local IP netmask Default Gateway Local network speed information Local: Local AE Title Local port number Verification: The AE Title, IP address and port number of the SCP Max retries, Retry interval, Timeout Modality Worklist: The AE Title, IP address and port number of the SCP Max retries, Retry interval, Timeout Refresh interval - the interval between downloads from the worklist. Searching for a patient within the time of a refresh interval does not perform a new worklist query. Disabling/enabling and setting constant values for query fields This is a way to disable search criteria in the worklist query or setting them to a fixed value. Maximum number of downloaded entries Storage: The AE Title, IP address and port number of the SCP Max retries, Retry interval, Timeout Enable/disable raw data Frame rate reduction Enable/disable multi-frame Compression selections Color support Association strategies: one association per image or one association per exam Include structured report (SR). Included Key Object Selection Document for Image Rejection (KOS) Modality Performed Procedure Step: The AE Title, IP address and port number of the SCP Max retries, Retry interval, Timeout Storage Commitment: The AE Title, IP address and port number of the SCP 22

30 Print: Max retries, Retry interval, Timeout The associated Storage service which triggers the sending of Storage Commitment requests The AE Title, IP address and port number of the SCP Max retries, Retry interval, Timeout Include Annotation Box Configuration for each job according to attribute description in Section 12 of this document. Query/Retrieve: The AE Title, IP address and port number of the SCP Max retries, Retry interval, Timeout Disabling/enabling and setting constant values for query fields Maximum number of downloaded entries 2.7 SUPPORT OF EXTENDED CHARACTER SETS LOGIQ E9 will support the ISO IR 100 (ISO :1987 Latin alphabet N 1. supplementary set). 2.8 CODES AND CONTROLLED TERMINOLOGY Fixed Coded Terminology The product uses the fixed (non-configurable, non-extensible) coded terminology in SR Document and Key Object Selection attributes, as described in Section Annex D SR INFORMATION OBJECT IMPLEMENTATION and Annex J KEY OBJECT SELECTION DOCUMENT INFORMATION OBJECT IMPLEMENTATION. 2.9 SECURITY PROFILES The product does not conform to any defined DICOM Security Profiles. It is assumed that the product is used within a secured environment. It is assumed that a secured environment includes at a minimum: 1. Firewall or router protections to ensure that only approved external hosts have network access to the product. 2. Firewall or router protections to ensure that the product only has network access to approved external hosts and services. 3. Any communications with external hosts and services outside the locally secured environment use appropriate secure network channels (such as a Virtual Private Network (VPN)) 23

31 3. MEDIA STORAGE CONFORMANCE STATEMENT 3.1 INTRODUCTION This section of the conformance statement (CS) specifies the LOGIQ E9 compliance to DICOM Media Interchange. It details the DICOM Media Storage Application Profiles and roles, which are supported by this product. LOGIQ E9 is able to export images to DICOM media, browse DICOM media or read images from DICOM media. 3.2 IMPLEMENTATION MODEL Application Data Flow Diagram The Basic and Specific Application models for this device are shown in the following Illustration: ILLUSTRATION 3 1 SPECIFIC AE APPLICATION MODEL Exam Export LOGIQ E9 FSC FSU Media Storage DICOM Browse FSR LOGIQ E9 can initialize Media by acting as an FSC to create a new DICOM File-set on CD/DVD media of various sizes (includes CDs labeled 650MB, 700MB and DVD-R media labeled 4.7GB). The SOP instances written to media must be one of the instances supported by LOGIQ E9. A pre-existing File-set will be updated with the information in DICOM files copied to media Functional Definition of AE s LOGIQ E9 can perform these functions: Create a new DICOM File-set on media Update DICOM File-set by adding new SOP instances to the File-set Read information and images from the existing File-set Sequencing Requirements None applicable File Meta Information Options (See PS3.10) The File Meta-Information for this implementation is: File Meta-Information Version 1 LOGIQ E9 Implementation UID

32 Implementation Version Name LOGIQ E9 Note: The Implementation Version Name and may change in the future without modification of this document. 3.3 AE SPECIFICATIONS LOGIQ E9 AE Specification The LOGIQ E9 Application Entity provides standard conformance to DICOM Interchange Option of the Media Storage Service Class. The Application Profiles and roles are listed below; the standard profiles are augmented with Secondary Capture images. Supported Application Profile Real World Activity Role Description AUG-US-SC-SF-CDR, AUG-US-SC-MF-CDR, AUG-US-SC-SF-DVD, AUG-US-SC-MF-DVD Exam export FSR/ FSC/ FSU Interchange Browse FSR Interchange Exam Read FSR Interchange Exam export FSR/FSC/ FSU Interchange Browse FSR Interchange Exam Read FSR Interchange File Meta Information for the LOGIQ E9 Application Entity The Source Application Entity is set from the LOGIQ E9 local AE title. The local AE is configurable. Following are the default value set in the File Meta Information for this AE Title: Source Application Entity Title LOGIQ E9-0 (User Configurable) Real-World Activities for the LOGIQ E9 Application Entity Real-World Activity Exam export Exam export saves a DICOM SOP instance to media and updates DICOM File Set Media Storage Application Profile for the Real-World Activity Exam export : For the list of Application Profiles that invoke this AE for Exam export Real-World Activity, see the Table in Section 3.3 LOGIQ E9 AE Specification where the table describing the profiles and realworld activities is defined Options Following are the SOP Classes supported by the Real-World Activity Exam export : Information Object Definition SOP Class UID Transfer Syntax Transfer Syntax UID 25

33 DICOM Media Storage Directory Explicit VR Little Endian Ultrasound Multi-frame Image Storage Explicit VR Little Endian Run Length Encoding, RLE JPEG Baseline Ultrasound Image Storage Explicit VR Little Endian Run Length Encoding, RLE JPEG Baseline Secondary Capture Image Storage CT Image Storage MR Image Storage Digital Mammography Storage For Presentation Positron Emission Tomography Image Storage Explicit VR Little Endian Run Length Encoding, RLE JPEG Baseline Explicit VR Little Endian Explicit VR Little Endian Explicit VR Little Endian Explicit VR Little Endian Real-World Activity DICOM Browse DICOM Browse is activated when the user searches for an exam in Search screen Media Storage Application Profile for the Real-World Activity DICOM Browse For the list of Application Profiles that invoke this AE for Image Read Real-World Activity, see the Table in Section LOGIQ E9 AE Specification Options Following are the SOP Classes supported by the Real-World Activity DICOM Browse: Information Object Definition DICOM Media Storage Directory Ultrasound Multi-frame Image Storage Ultrasound Multi-frame Image Storage(retired) SOP Class UID Transfer Syntax Transfer Syntax UID Explicit VR Little Endian Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Explicit VR Little Endian Explicit VR Big Endian

34 Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Ultrasound Image Storage Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Ultrasound Image Storage (retired) Secondary Capture Image Storage Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy CT Image Storage Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy

35 MR Image Storage Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Digital Mammography Storage For Presentation Positron Emission Tomography Image Storage Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Real-World Activity Exam read Exam read reads and displays a DICOM SOP instance from media Media Storage Application Profile for the Real-World Activity Exam read For the list of Application Profiles that invoke this AE for Exam read Real-World Activity, see the Table in Section LOGIQ E9 AE Specification Options Following are the SOP Classes supported by the Exam read Real-World Activity: Information Object Definition SOP Class UID Transfer Syntax Transfer Syntax UID DICOM Media Storage Directory Explicit VR Little Endian

36 Ultrasound Multi-frame Image Storage Ultrasound Multi-frame Image Storage(retired) Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Ultrasound Image Storage Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Ultrasound Image Storage (retired) Secondary Capture Image Storage Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy

37 CT Image Storage Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy MR Image Storage Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Digital Mammography Storage For Presentation Positron Emission Tomography Image Storage Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy Explicit VR Little Endian Explicit VR Big Endian Implicit VR Little Endian Run Length Encoding, RLE JPEG Baseline JPEG Lossless Non Hierarchical (Process 14) JPEG 2000 Lossless JPEG 2000 Lossy AUGMENTED AND PRIVATE APPLICATION PROFILES LOGIQ E9 creates Secondary Capture Image Objects in addition to the objects defined in the application profiles. 3.5 EXTENSIONS, SPECIALIZATIONS, PRIVATIZATIONS OF SOP CLASSES AND TRANSFER SYNTAXES Not Applicable. 3.6 CONFIGURATION Not Applicable. 30

38 3.7 SUPPORT OF EXTENDED CHARACTER SETS LOGIQ E9 will support the ISO IR 100 (ISO :1987 Latin alphabet N 1. supplementary set). Any incoming SOP instance that is encoded using another extended character set will not be read. 31

39 4. ANNEX A - ULTRASOUND (US) INFORMATION OBJECT IMPLEMENTATION 4.1 INTRODUCTION This section specifies the use of the DICOM US Image IOD to represent the information included in US images produced by this implementation. Corresponding attributes are conveyed using the module construct. The contents of this section are: IOD Module Table IOD Module Definition In this section, supported means that tag is sent with value while not used means that the modules or tags are not used, not sent or sent empty. 4.2 IOD MODULE TABLE Within an entity of the DICOM US IOD, attributes are grouped into related set of attributes. A set of related attributes is termed a module. A module facilitates the understanding of the semantics concerning the attributes and how the attributes are related with each other. A module grouping does not infer any encoding of information into data sets. Table Section 4.2-1identifies the defined modules within the entities, which comprise the DICOM US IOD. See DICOM Part 3 for a complete definition of the entities, modules, and attributes. Only the single frame US Image IOD is described here. TABLE 4-1 US IMAGE IOD MODULES Entity Name Module Name Reference Patient Patient Study General Study Patient Study Series General Series Frame of Reference Frame of Reference Not used Synchronization Not used Equipment General Equipment Image General Image Image Pixel Contrast/Bolus Palette Color Lookup Table US Region Calibration US Image Overlay Plane Not used VOI LUT SOP Common

40 Curve Not used 4.3 INFORMATION MODULE DEFINITIONS Please refer to DICOM Standard Part 3 (Information Object Definitions) for a description of each of the entities and modules contained within the US Information Object. The following modules are included to convey Enumerated Values, Defined Terms, and Optional Attributes supported. Type 1 & Type 2 Attributes are also included for completeness and to define what values they may take and where these values are obtained. It should be noted that they are the same ones as defined in the DICOM Standard Part 3 (Information Object Definitions) Common Patient Entity Modules Patient Module This section specifies the Attributes of the Patient that describe and identify the Patient who is the subject of a diagnostic Study. This Module contains Attributes of the patient that are needed for diagnostic interpretation of the Image and are common for all studies performed on the patient. TABLE 4-3 PATIENT MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Patient's Name (0010,0010) 2 May be entered from User Interface. Taken from worklist if it is there. Patient ID (0010,0020) 2 May be entered from User Interface. Taken from worklist if it is there. Patient's Birth Date (0010,0030) 2 May be entered from User Interface. Taken from worklist if it is there. Patient's Sex (0010,0040) 2 May be entered from User Interface. Taken from worklist if it is there. Referenced Patient Sequence (0008,1120) 3 Taken from worklist if it is there >Referenced SOP Class UID (0008,1150) 1C Taken from worklist if it is there. >Referenced SOP Instance UID (0008,1155) 1C Taken from worklist if it is there Patient's Birth Time (0010,0032) 3 Taken from worklist if it is there. Other Patient Ids (0010,1000) 3 Taken from worklist if it is there. Other Patient Names (0010,1001) 3 Not used Ethnic Group (0010,2160) 3 Taken from worklist if it is there. Patient Comments (0010,4000) 3 Taken from worklist if it is there Common Study Entity Modules The following Study IE Modules are common to all Composite Image IODs, which reference the Study IE. These modules contain Attributes of the patient and study that are needed for diagnostic interpretation of the image General Study Module This section specifies the attributes that describe and identify the Study performed upon the Patient. 33

41 TABLE 4-4 GENERAL STUDY MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Study Instance UID (0020,000D) 1 Uniquely generated by the equipment. Taken from worklist if it is there. Study Date (0008,0020) 2 Is set to examination date Study Time (0008,0030) 2 Is set to examination time Referring Physician's Name (0008,0090) 2 May be entered from User Interface. Taken from worklist if it is there. Study ID (0020,0010) 2 Is set to be empty. Accession Number (0008,0050) 2 May be entered from User Interface. Taken from worklist if it is there. Study Description (0008,1030) 3 Taken from worklist if it is there (from Requested Procedure Description). Physician(s) of Record (0008,1048) 3 Taken from worklist if it is there (from Names of Intended Recipients of Result) Name of Physician(s) Reading Study (0008,1060) 3 Not used Referenced Study Sequence (0008,1110) 3 Taken from worklist if it is there. (Not used in SR Documents.) >Referenced SOP Class UID (0008,1150) 1C Taken from worklist if it is there. (Not used in SR Documents.) >Referenced SOP Instance UID (0008,1155) 1C Taken from worklist if it is there. (Not used in SR Documents.) Procedure Code Sequence (0008,1032) 3 Not used Patient Study Module This section defines attributes that provide information about the Patient at the time that the Study was performed. TABLE 4-5 PATIENT STUDY MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Admitting Diagnoses Description (0008,1080) 3 Not used Patient's Age (0010,1010) 3 Not used Patient's Size (0010,1020) 3 May be entered from User Interface. Taken from worklist if it is there. Patient's Weight (0010,1030) 3 May be entered from User Interface. Taken from worklist if it is there. Occupation (0010,2180) 3 Not used Additional Patient s History (0010,21B0) 3 Taken from worklist if it is there. 34

42 4.3.3 Common Series Entity Modules The following Series IE Modules are common to all Composite Image IODs, which reference the Series IE General Series Module This section specifies the attributes that identify and describe general information about the Series within a Study. TABLE 4-2 GENERAL SERIES MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Modality (0008,0060) 1 Defined Term US used. When reading SC all modalities are accepted. Series Instance UID (0020,000E) 1 Uniquely generated by the equipment Series Number (0020,0011) 2 Internal number which is incremented for each new series (exam) within a study. Laterality (0020,0060) 2C Not used Series Date (0008,0021) 3 Is set to Series date Series Time (0008,0031) 3 Is set to Series time Performing Physicians Name (0008,1050) 3 May be entered from User Interface. Taken from worklist if it is there (from Scheduled Performing Physician s Name) Operator s Name (0008,1070) 3 May be entered from User Interface. Default is login id. Procotol Name (0018,1030) 3 Not used Series Description (0008,103E) 3 Not used Referenced Performed Procedure Step Sequence (0008,1111) 3 Used if Modality Performed Procedure Step is enabled. >Referenced SOP Class UID (0008,1150) 1C Used if Modality Performed Procedure Step is enabled. >Referenced SOP Instance UID (0008,1155) 1C Used if Modality Performed Procedure Step is enabled. Body Part Examined (0018,0015) 3 Not used Patient Position (0018,5100) 2C Not used Smallest Pixel Value in Series (0028,0108) 3 Not used Largest Pixel Value in Series (0028,0109) 3 Not used Request Attributes Sequence (0040,0275) 3 Used if Modality Worklist and/or Modality Performed Procedure Step is enabled. >Requested Procedure ID (0040,1001) 1C Taken from worklist if it is there. >Scheduled Procedure Step ID (0040,0009) 1C Taken from worklist if it is there. >Scheduled Procedure Step Description (0040,0007) 3 Taken from worklist if it is there. >Scheduled Protocol Code Sequence (0040,0008) 3 Taken from worklist if it is there. >>Include Code Sequence Macro Performed Procedure Step ID (0040,0253) 3 Used if Modality Performed Procedure Step is enabled. Performed Procedure Step Start Date (0040,0244) 3 Used if Modality Performed Procedure Step is enabled. Performed Procedure Step Start Time (0040,0245) 3 Used if Modality Performed Procedure Step is enabled. Performed Procedure Step Description (0040,0254) 3 Used if Modality Performed Procedure Step is enabled. Performed Protocol Code Sequence (0040,0260) 3 Taken from worklist if it is there (from Scheduled Protocol Code Sequence) 35

43 4.3.4 Common Equipment Entity Modules The following Equipment IE Module is common to all Composite Image IODs, which reference the Equipment IE General Equipment Module This section specifies the attributes that identify and describe the piece of equipment, which produced a Series of Images. TABLE 4-7 GENERAL EQUIPMENT MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Manufacturer (0008,0070) 2 Is set to GE Healthcare Institution Name (0008,0080) 3 Is set to configured Institution Name. Institution Address (0008,0081) 3 Not used Station Name (0008,1010) 3 Is set to configured Station Name. Institutional Department Name (0008,1040) 3 May be entered from User Interface. Default is configured Department name. Manufacturer's Model Name (0008,1090) 3 Is set to LOGIQ E9. Device Serial Number (0018,1000) 3 Not used Software Versions (0018,1020) 3 Is set to LOGIQ E9 software version Spatial Resolution (0018,1050) 3 Not used Date of Last Calibration (0018,1200) 3 Not used Time of Last Calibration (0018,1201) 3 Not used Pixel Padding Value (0028,0120) 3 Not used Common Image Entity Modules The following Image IE Modules are common to all Composite Image IODs, which reference the Image IE General Image Module This section specifies the attributes that identify and describe an image within a particular series. TABLE 4-8 GENERAL IMAGE MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Instance Number (0020,0013) 2 Internal value which is incremented for each captured image within a series. (within an exam) Patient Orientation (0020,0020) 2C Sent with empty value. Content Date (0008,0023) 2C Set from Image date Content Time (0008,0033) 2C Set from Image time Image Type (0008,0008) 3 The first two values contain ORIGINAL/PRIMARY or DERIVED/ PRIMARY. Value 3 is the description of the type of application per the DICOM PS , section C Value 4 is a description of the mode per the DICOM PS , section C Values 5 and 6 may be used for private data. 36

44 Attribute Name Tag Type Attribute Description Acquisition Number (0020,0012) 3 Not used Acquisition Date (0008,0022) 3 Not used Acquisition Time (0008,0032) 3 Not used Referenced Image Sequence (0008,1140) 3 Not used Derivation Description (0008,2111) 3 May contain additional derivation information if Image Type is DERIVED. Source Image Sequence (0008,2112) 3 Not used Images in Acquisition (0020,1002) 3 Not used Image Comments (0020,4000) 3 May be used for description of the image Quality Control Image (0028,0300) 3 Not used Burned In Annotation (0028,0301) 3 Not used Lossy Image Compression (0028,2110) 3 Set to 01 if image is lossy compressed. Lossy Image Compression Ratio (0028,2112) 3 Used if lossy compressed Image Pixel Module This section specified the attributes that describe the pixel data of the image. TABLE 4-9 IMAGE PIXEL MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Samples per Pixel (0028,0002) 1 Value of 1 if Photometric Interpretation element value has value MONOCHROME2, PALETTE COLOR Value of 3 when Photometric Interpretation element value has value RGB, 'YBR_FULL' 'YBR_FULL_422' 'YBR_RCT' 'YBR_ICT' Photometric Interpretation (0028,0004) 1 Defined Values used: MONOCHROME2, (Encoding and Display) PALETTE COLOR (Display only) RGB, (Compression sets to JPEG Lossless) 'YBR_FULL' (Compression sets to RLE) 'YBR_FULL_422' (Compression sets to JPEG Lossy) 'YBR_RCT' (Compression sets to JPEG 2000 Lossless) 'YBR_ICT' (Compression sets to JPEG 2000 Lossy) Rows (0028,0010) 1 Value depends on scanning mode and configuration setup Columns (0028,0011) 1 Value depends on scanning mode and configuration setup. Bits Allocated (0028,0100) 1 Value always = 0008H. Bits Stored (0028,0101) 1 Value always = 0008H. High Bit (0028,0102) 1 Value always = 0007H. Pixel Representation (0028,0103) 1 Defined Value 0 - unsigned integer. Pixel Data (7FE0,0010) 1 Pixel Data of image. 37

45 Attribute Name Tag Type Attribute Description Planar Configuration (0028,0006) 1C Enumerated value 0000H, color-by-pixel, if Photometric Interpretation element value has value RGB or if image is JPEG compressed. Enumerated value 0001H, color-by-plane if image is RLE compressed. Pixel Aspect Ratio (0028,0034) 1C Not used Smallest Image Pixel Value (0028,0106) 3 Not used Largest Image Pixel Value (0028,0107) 3 Not used Red Palette Color Lookup Table Descriptor (0028,1101) 1C Only used when reading Palette images. Green Palette Color Lookup Table Descriptor Blue Palette Color Lookup Table Descriptor (0028,1102) 1C Only used when reading Palette images. (0028,1103) 1C Only used when reading Palette images. Red Palette Color Lookup Table Data (0028,1201) 1C Only used when reading Palette images. Green Palette Color Lookup Table Data (0028,1202) 1C Only used when reading Palette images. Blue Palette Color Lookup Table Data (0028,1203) 1C Only used when reading Palette images Contrast/Bolus Module This section specifies the attributes that describe the contrast /bolus used in the acquisition of the Image. Contrast Agent won t be sent if no Contrast Agent was used to acquire images. TABLE 4-10 CONTRAST/BOLUS MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Contrast/Bolus Agent (0018,0010) 2 Contrast Agent won t be sent if no Contrast Agent was used to acquire images. If contrast agent is used, the value is taken from worklist (Requested Contrast Agent). Contrast/Bolus Agent Sequence (0018,0012) 3 Not used Contrast/Bolus Route (0018,1040) 3 Not used Contrast/Bolus Administration Route Sequence (0018,0014) 3 Not used Contrast/Bolus Volume (0018,1041) 3 Not used Contrast/Bolus Start Time (0018,1042) 3 Not used Contrast/Bolus Stop Time (0018,1043) 3 Not used Contrast/Bolus Total Dose (0018,1044) 3 Not used Contrast Flow Rate(s) (0018,1046) 3 Not used Contrast Flow Duration(s) (0018,1047) 3 Not used Contrast/Bolus Ingredient (0018,1048) 3 Not used Contrast/Bolus Ingredient Concentration (0018,1049) 3 Not used Palette Color Lookup Table Module This section specifies the attributes that describe the Lookup table data for images with Palette Color photometric interpretation. TABLE 4-11 PALETTE COLOR LOOKUP MODULE Attribute Name Tag Type Attribute Description 38

46 Attribute Name Tag Type Attribute Description Red Palette Color Lookup Table Descriptor (0028,1101) 1C Only used when reading Palette images. Green Palette Color Lookup Table Descriptor (0028,1102) 1C Only used when reading Palette images. Blue Palette Color Lookup Table Descriptor (0028,1103) 1C Only used when reading Palette images. Palette Color Lookup Table UID (0028,1199) 3 Not used Red Palette Color Lookup Table Data (0028,1201) 1C Only used when reading Palette images. Green Palette Color Lookup Table Data (0028,1202) 1C Only used when reading Palette images. Blue Palette Color Lookup Table Data (0028,1203) 1C Only used when reading Palette images. Segmented Red Palette Color Lookup Table Data Segmented Green Palette Color Lookup Table Data Segmented Red Palette Color Lookup Table Data VOI LUT Module (0028,1221) 1C Not used (0028,1222) 1C Not used (0028,1223) 1C Not used This section specifies the attributes that identify and describe the VOI LUT Module TABLE 4-12 VOI LUT MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description VOI LUT Sequence (0028,3010) 3 Not used >LUT Descriptor (0028,3002) 3 Not used >LUT Explanation (0028,3003) 3 Not used >LUT Data (0028,3006) 3 Not used Window Center (0028,1050) 3 Value set to 127 if Photometric Interpretation has value MONOCHROME2. Window Width (0028,1051) 3 Value set to 256 if Photometric Interpretation has value MONOCHROME2. Window Center & Width Explanation (0028,1055) 3 Not used 39

47 4.3.6 General Modules The SOP Common Module is mandatory for all DICOM IODs SOP Common Module This section defines the attributes that are required for proper functioning and identification of the associated SOP Instances. They do not specify any semantics about the Real-World Object represented by the IOD. TABLE 4-13 SOP COMMON MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description SOP Class UID (0008,0016) 1 Set to or SOP Instance UID (0008,0018) 1 Uniquely generated by the equipment Specific Character Set (0008,0005) 1C Set to ISO_IR100 or ISO 2022 IR 87 if extended characters is used. Image Read: images using other extended character set than ISO_IR 100 or ISO 2022 IR 87 are rejected. Instance Creation Date (0008,0012) 3 Not used Instance Creation Time (0008,0013) 3 Not used Instance Creator UID (0008,0014) 3 Not used Instance Number (0020,0013) 3 Not used US Modules This Section describes US Series, Equipment, and Image Modules. These Modules contain attributes that are specific to US Image IOD US Region Calibration Module US Region Calibration Module is used to describe multiple regions. Note: if a multi-frame image has been acquired with different calibration, the US Region Calibration Module will not be used. TABLE 4-14 US REGION CALIBRATION MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Sequence of Ultrasound Regions (0018,6011) 1 Object contains 1 or more regions >Region Location Min x 0 (0018,6018) 1 Value is 0 >Region Location Min y 0 (0018,601A) 1 Value is 0 >Region Location Max x 1 (0018,601C) 1 Value is image width-1. >Region Location Max y 1 (0018,601E) 1 Value is image height-1 >Physical Units X Direction (0018,6024) 1 Enumerated Values supported: 0003H cm 0004H seconds >Physical Units Y Direction (0018,6026) 1 Enumerated Values supported: 0003H cm 0004H seconds 0007H cm/sec >Physical Delta X (0018,602C) 1 Varies with scanning mode 40

48 Attribute Name Tag Type Attribute Description >Physical Delta Y (0018,602E) 1 Varies with scanning mode >Reference Pixel x 0 (0018,6020) 3 Varies with scanning mode >Reference Pixel y 0 (0018,6022) 3 Varies with scanning mode >Ref. Pixel Physical Value X (0018,6028) 3 Varies with scanning mode >Ref. Pixel Physical Value Y (0018,602A) 3 Varies with scanning mode >Region Spatial Format (0018,6012) 1 Supported. The spatial organization of the data within the region. Supported enumerated values are: Value Meaning 0000H None or not applicable 0001H 2D (tissue or flow) 0002H M -Mode (tissue or flow) 0003H Spectral (CW or PW Doppler) Per the DICOM PS , section C >Region Data Type (0018,6014) 1 Supported. The type of data within the region. Supported enumerated values are: Value Meaning 0000H None or not applicable 0001H Tissue 0002H Color Flow 0003H PW Spectral Doppler 0004H CW Spectral Doppler 0006H Doppler Mode Trace Per the DICOM PS , section C >Region Flags (0018,6016) 1 Bit 0: 0 = Opaque Bit 1: 0 = Not Protected because there may be other regions within the image Bit 2: 0 = Velocity >Pixel Component Organization (0018,6044) 1C Pixel component calibration data does not exist for any region >Pixel Component Mask (0018,6046) 1C Not used >Pixel Component Range Start (0018,6048) 1C Not used >Pixel Component Range Stop (0018,604A) 1C Not used >Pixel Component Physical Units (0018,604C) 1C Not used >Pixel Component Data Type (0018,604E) 1C Not used >Number of Table Break Points (0018,6050) 1C Not used >Table of X Break Points (0018,6052) 1C Not used >Table of Y Break Points (0018,6054) 1C Not used >Number of Table Entries (0018,6056) 1C Not used >Table of Pixel Values (0018,6058) 1C Not used >Table of Parameter Values (0018,605A) 1C Not used >Transducer Frequency (0018,6030) 3 Supported >Pulse Repetition Frequency (0018,6032) 3 Supported >Doppler Correction Angle (0018,6034) 3 Not used >Steering Angle (0018,6036) 3 Not used >Doppler Sample Volume X Position (0018,6038) 3 Not used >Doppler Sample Volume Y Position (0018,603A) 3 Not used >TM-Line Position x 0 (0018,603C) 3 Not used 41

49 Attribute Name Tag Type Attribute Description >TM-Line Position y 0 (0018,603E) 3 Not used >TM-Line Position x 1 (0018,6040) 3 Not used >TM-Line Position y 1 (0018,6042) 3 Not used 42

50 US Image Module This section specifies the attributes that describe ultrasound images. TABLE 4-15 US IMAGE MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Samples Per Pixel (0028,0002) 1 Value of 1 if Photometric Interpretation element value has value 'MONOCHROME2' or 'PALETTE COLOR' Value of 3 when Photometric Interpretation element value has value 'RGB', (Compression sets to JPEG Lossless) 'YBR_FULL' (Compression sets to RLE) 'YBR_FULL_422' (Compression sets to JPEG Lossy) 'YBR_RCT' (Compression sets to JPEG 2000 Lossless) 'YBR_ICT' (Compression sets to JPEG 2000 Lossy) Photometric Interpretation (0028,0004) 1 Defined Values used: 'MONOCHROME2', 'RGB', 'PALETTE COLOR' 'YBR_FULL', 'YBR_FULL_422', 'YBR_RCT', 'YBR_ICT' Bits Allocated (0028,0100) 1 Value always = 0008H Bits Stored (0028,0101) 1 Value always = 0008H High Bit (0028,0102) 1 Value always = 0007H Planar Configuration (0028,0006) 1 Enumerated value 000H, color-by-pixel, if Photometric Interpretation element value has value RGB, YBR_RCT, YBR_ICT or YBR_FULL_422. Enumerated value 001H, color by plane, if Photometric Interpretation element has value YBR_FULL. Pixel Representation (0028,0103) 1 Always 0000H = unsigned integer. Frame Increment Pointer (0028,0009) 1C Export: Is set to Frame Time (0018,1063) or Frame Time Vector (0018,1065) if the image is multiframe IOD, Not used if the image is a single frame IOD. 43

51 Attribute Name Tag Type Attribute Description Image Type (0008,0008) 2 The first two values contain 'ORIGINAL/PRIMARY' or 'DERIVED/ PRIMARY'. Value 3 is the description of the type of application per the DICOM PS , section C ; Supported enumerated values are: ABDOMINAL GYNECOLOGY OBSTETRICAL PEDIATRIC SMALL PARTS VASCULAR SCROTAL INTRACARDIAC Value 4 is a description of the mode per the DICOM PS , section C ; Supported enumerated values are sum of values in hexadecimal encoded, which based on: Value Meaning D Imaging 0002 M- Mode 0004 CW Doppler 0008 PW Doppler 0010 Color Doppler 0020 Color M-Mode D Rendering 0100 Color Power Mode Values 5 and 6 may be used for private data. Lossy Image Compression (0028,2110) 1C Set to 01 if image is compressed using JPEG Baseline or JPEG 2000 Lossy compression. Ultrasound Color Data Present (0028,0014) 3 Supported Referenced Overlay Sequence (0008,1130) 3 Not used Referenced Curve Sequence (0008,1145) 3 Not used Stage Name (0008,2120) 3 Name of stage of stress test. Sent if image is acquired in a stress test. The name is defined in the User Interface. Stage Number (0008,2122) 3 Number of stage, starting at one. Sent if image is acquired in a stress test. View Name (0008,2127) 3 Name of view of stress test. Sent if image is acquired in a stress test. The name is defined in the User Interface. View Number (0008,2128) 3 Number of view, starting at one. Sent if image is acquired in a stress test. Number of Event Timers (0008,2129) 3 Not used Event Elapsed Time(s) (0008,2130) 3 Not used Event Timer Name(s) (0008,2132) 3 Not used Anatomic Region Sequence (0008,2218) 3 Not used Primary Anatomic Structure Sequence (0008,2228) 3 Not used Transducer Position Sequence (0008,2240) 3 Not used Transducer Orientation Sequence (0008,2244) 3 Not used Trigger Time (0018,1060) 3 Not used Nominal Interval (0018,1062) 3 Not used Beat Rejection Flag (0018,1080) 3 Not used Low R-R Value (0018,1081) 3 Not used High R-R Value (0018,1082) 3 Not used 44

52 Attribute Name Tag Type Attribute Description Heart Rate (0018,1088) 3 Set to heart rate Output Power (0018,5000) 3 Not used Transducer Data (0018,5010) 3 Not used Transducer Type (0018,6031) 3 Not used Focus Depth (0018,5012) 3 Not used Preprocessing Function (0018,5020) 3 Not used Mechanical Index (0018,5022) 3 Not used Bone Thermal Index, (0018,5024) 3 Not used Cranial Thermal Index (0018,5026) 3 Not used Soft Tissue Thermal Index (0018,5027) 3 Not used Soft Tissue-focus Thermal Index (0018,5028) 3 Not used Soft Tissue-surface Thermal Index (0018,5029) 3 Not used Depth of Scan Field (0018,5050) 3 Not used Image Transformation Matrix (0018,5210) 3 Not used Image Translation Vector (0018,5212) 3 Not used Overlay Subtype (60xx,0045) 3 Not used 45

53 5. ANNEX B ULTRASOUND MULTIFRAME (US MF) INFORMATION OBJECT IMPLEMENTATION 5.1 INTRODUCTION This section specifies the use of the DICOM US Multi-frame Image IOD to represent the information included in US images produced by this implementation. Corresponding attributes are conveyed using the module construct. The contents of this section are: IOD Module Table IOD Module Definition 5.2 IOD MODULE TABLE Within an entity of the DICOM US Multi-Frame IOD, attributes are grouped into related set of attributes. A set of related attributes is termed a module. A module facilitates the understanding of the semantics concerning the attributes and how the attributes are related with each other. A module grouping does not infer any encoding of information into datasets. Table 5.2 identifies the defined modules within the entities, which comprise the DICOM US Multi- Frame IOD. See DICOM Part 3 for a complete definition of the entities, modules, and attributes. TABLE 5-1 US MULTI-FRAME IOD MODULES 46

54 Entity Name Module Name Reference Patient Patient Study General Study Patient Study Series General Series Frame of Reference Equipment Frame of Reference Synchronization General Equipment Not used Not used Image General Image Curve Image Pixel Contrast/Bolus Cine Multi-frame Palette Color Lookup Table US Region Calibration US Image Overlay Plane Not used VOI LUT SOP Common Not used 5.3 INFORMATION MODULE DEFINITIONS Please refer to DICOM Standard Part 3 (Information Object Definitions) for a description of each of the entities and modules contained within the US Multi-Frame Information Object. The following modules are included to convey Enumerated Values, Defined Terms, and Optional Attributes supported. Type 1 & Type 2 Attributes are also included for completeness and to define what values they may take and where these values are obtained. It should be noted that they are the same ones as defined in the DICOM Standard Part 3 (Information Object Definitions) Common Image Modules The following Image IE Modules are common to all Composite Image IODs which reference the Image IE. 47

55 Cine Module TABLE 5-2 CINE MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Frame Time (0018,1063) 1C Is set to the interframe time Frame Time Vector (0018,1065) 1C Supported. Reading: Average value is set to interframe time Start Trim (0008,2142) 3 Supported Stop Trim (0008,2143) 3 Supported Recommended Display Frame Rate (0008,2144) 3 Supported Cine Rate (0018,0040) 3 Supported Frame Delay (0018,1066) 3 Supported Effective Duration (0018,0072) 3 Supported Actual Frame Duration (0018,1242) 3 Supported Preferred Playback Sequencing (0018,1244) 3 Supported Multi-frame Module TABLE 5-3 MULTI-FRAME MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Number of Frames (0028,0008) 1 Is set to the number of frames in image Frame Increment Pointer (0028,0009) 1 Is set to Frame Time (0018,1063) or Frame Time Vector (0018,1065) 48

56 6. ANNEX C - SC INFORMATION OBJECT IMPLEMENTATION 6.1 INTRODUCTION This section specifies the use of the DICOM SC Image IOD to represent the information included in SC images produced by this implementation. Corresponding attributes are conveyed using the module construct. The contents of this section are: IOD Module Table IOD Module Definition 6.2 IOD MODULE TABLE Within an entity of the DICOM SC IOD, attributes are grouped into related set of attributes. A set of related attributes is termed a module. A module facilitates the understanding of the semantics concerning the attributes and how the attributes are related with each other. A module grouping does not infer any encoding of information into datasets. Table Section 6.4-1identifies the defined modules within the entities, which comprise the DICOM SC IOD. Modules are identified by Module Name. See DICOM Part 3 for a complete definition of the entities, modules, and attributes. TABLE 6-1 SC IMAGE IOD MODULES Entity Name Module Name Reference Patient Patient Study General Study Patient Study Series General Series Equipment General Equipment SC Equipment Image General Image Image Pixel SC Image Overlay Plane Modality LUT Not used Not used VOI LUT SOP Common INFORMATION MODULE DEFINITIONS Please refer to DICOM Standard Part 3 (Information Object Definitions) for a description of each of the entities and modules contained within the SC Information Object. The following modules are included to convey Enumerated Values, Defined Terms, and Optional Attributes supported. Type 1 & Type 2 Attributes are also included for 49

57 completeness and to define what values they may take and where these values are obtained. It should be noted that they are the same ones as defined in the DICOM Standard Part 3 (Information Object Definitions) SC Modules This Section describes SC Equipment, and Image Modules. These Modules contain attributes that are specific to SC Image IOD SC Equipment Module This Module describes equipment used to convert images into a DICOM format. TABLE 6-2 SC EQUIPMENT MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Conversion Type (0008,0064) 1 Set to WSD Modality (0008,0060) 3 Defined Value US used. When reading SC all modalities are accepted Secondary Capture Device ID (0018,1010) 3 Defined Value LOGIQ E9 Secondary Capture Device Manufacturer (0018,1016) 3 Implementation defined string GE Healthcare Secondary Capture Device Manufacturer's Model Name (0018,1018) 3 Implementation defined string LOGIQ E9 Secondary Capture Device Software Version (0018,1019) 3 Is set to LOGIQ E9 software version Video Image Format Acquired (0018,1022) 3 Not used Digital Image Format Acquired (0018,1023) 3 Not used SC Image Module The table in this Section contains IOD attributes that describe SC images. TABLE 6-3 SC IMAGE MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Date of Secondary Capture (0018,1012) 3 Image capture date Time of Secondary Capture (0018,1014) 3 Image capture time 50

58 7. ANNEX D - SR INFORMATION OBJECT IMPLEMENTATION 7.1 INTRODUCTION This section specifies the use of the DICOM Comprehensive SR IOD to represent results produced by this implementation. Corresponding attributes are conveyed using the module construct. The contents of this section are: Section 7.2- IOD Module Table Section 7.3- IOD Module Definition In this section, supported means that tag is sent with value. 7.2 IOD MODULE TABLE Within an entity of the DICOM Comprehensive SR IOD, attributes are grouped into related set of attributes. A set of related attributes is termed a module. A module facilitates the understanding of the semantics concerning the attributes and how the attributes are related with each other. A module grouping does not infer any encoding of information into data sets. Table 7-2 identifies the defined modules within the entities, which comprise the DICOM Comprehensive SR IOD. See DICOM Part 3 for a complete definition of the entities, modules, and attributes. TABLE 7-1 COMPREHENSIVE SR IMAGE IOD MODULES Entity Name Module Name Reference Patient Patient Specimen Identification Not used Study General Study Patient Study Series SR Document Series Equipment General Equipment Document SR Document General SR Document Content SOP Common INFORMATION MODULE DEFINITIONS Please refer to DICOM Standard Part 3 (Information Object Definitions) for a description of each of the entities and modules contained within the Comprehensive SR Information Object. The following modules are included to convey Enumerated Values, Defined Terms, and Optional Attributes supported. Type 1 & Type 2 Attributes are also included for 51

59 completeness and to define what values they may take and where these values are obtained. It should be noted that they are the same ones as defined in the DICOM Standard Part 3 (Information Object Definitions) SR Document Series Module TABLE SR DOCUMENT SERIES MODULE Attribute Name Tag Type Attribute Description Modality (0008,0060) 1 Defined Term SR used. Series Instance UID (0020,000E) 1 Uniquely generated by the equipment Series Number (0020,0011) 1 Internal number which is incremented for each new exam within a study. Referenced Performed Procedure Step Sequence (0008,1111) 2 Sent as empty SR Document General Module TABLE SR DOCUMENT GENERAL MODULE Attribute Name Tag Type Attribute Description Instance Number (0020,0013) 1 Internal number which is incremented for each new SR document within a study. Completion Flag (0040,A491) 1 Defined Term PARTIAL used. Completion Flag Description (0040,A492) 3 Not used Verification Flag (0040,A493) 1 Defined Term UNVERIFIED used. Content Date (0008,0023) 1 Date of creation, based upon user action that invoked the use of the object Content Time (0008,0033) 1 Time of creation, based upon user action that invoked the use of the object. Verifying Observer Sequence (0040,A073) 1C Not used Predecessor Documents Sequence (0040,A360) 1C Not used. Identical Documents Sequence (0040,A525) 1C Not used Referenced Request Sequence (0040,A370) 1C Filled in if the exam is based on a Worklist entry >Study Instance UID (0020,000D) 1 Taken from Study Instance UID in General Study Module >Referenced Study Sequence (0008,1110) 2 Not used >Accession Number (0008,0050) 2 Taken from Accession Number in General Study Module >Placer Order Number/Imaging Service Request (0040,2016) 2 Not used 52

60 >Filler Order Number/Imaging Service Request (0040,2017) 2 Not used >Requested Procedure ID (0040,1001) 2 Taken from worklist if it is there >Requested Procedure Description (0032,1060) 2 Taken from worklist if it is there >Requested Procedure Code Sequence (0032,1064) 2 Sent as empty. Performed Procedure Code Sequence (0040,A372) 2 Sent as empty. Current Requested Procedure Evidence Sequence (0040,A375) 1C Sent as empty. Pertinent Other Evidence Sequence (0040,A385) 1C Not used SR Document Content Module The SR Document Content Module is described in the following table TABLE SR DOCUMENT CONTENT MODULE ATTRIBUTES Attribute Name Tag Type Attribute Description Observation DateTime (0040,A032) 1C Not used Content Template Sequence (0040,A504) 1C Depending on application, see template Application Template ID Small Parts GEMS_US_0100 (99GEMS) Pediatrics GEMS_US_0100 (99GEMS) Urology GEMS_US_0100 (99GEMS) Vascular 5100 Vascular US Proc Rep (DCMR) Abdomen 5100 Vascular US Proc Rep (DCMR) OB 5000 OB-GYN US Proc Rep (DCMR) GYN 5000 OB-GYN US Proc Rep (DCMR) Cardiac 5200 Echocardiography Proc Rep (DCMR) Value Type (0040,A040) 1 CONTAINER Continuity of Content (0040,A050) 1C SEPARATE For flagging images rejected with quality reasons: Template ID: Key Object Selection (DCMR) Concept Name Code Sequence (0040,A043) 1C Depending on application, see template Ultrasound M&A document title (GEMS_US_0100) OB-GYN Ultrasound Procedure Report Vascular Ultrasound Procedure Report or Echocardiography Procedure Report For flagging images which are rejected or deleted during direct store (in progress sending): (113001, DCM, Rejected for Quality Reasons ) 53

61 Content Sequence (0040,A730) 1C Depending on application, see template Ultrasound M&A document title OB-GYN Ultrasound Procedure Report Vascular Ultrasound Procedure Report or Echocardiography Procedure Report For flagging images see Key Object Selection > Relationship Type (0040,A010) 1 Depending on application, see template Ultrasound M&A document title, OB-GYN Ultrasound Procedure Report, Vascular Ultrasound Procedure Report or Echocardiography Procedure Report. For flagging images see Key Object Selection > Referenced Content Item Identifier (0040,DB73) 1C Not used > SR Document Content Module Depending on application, see template Ultrasound M&A document title, OB-GYN Ultrasound Procedure Report, Vascular Ultrasound Procedure Report or Echocardiography Procedure Report. For flagging images see Key Object Selection SR Document Content Descriptions Content Template LOGIQ E9 supports the following root Templates for SR SOP Instances created, processed, or displayed by LOGIQ E9. TABLE SR ROOT TEMPLATES SOP Class Template ID Template Name Use Comprehensive SR GEMS_US_0100 Ultrasound M&A document title Create Comprehensive SR 5000 OB-GYN Ultrasound Procedure Report Create Comprehensive SR 5100 Vascular Ultrasound Procedure Report Create Comprehensive SR 5200 Echocardiography Procedure Report Create Key Object Selection Document 2010 Key Object Selection Document Create 54

62 7.4 STANDARD EXTENDED AND PRIVATE DATA ATTRIBUTES If so configured, the product will send measurement raw data information in private data elements designated by the Private Creator element: Element Name Tag VR VM Description Private Creator 6005,00xx LO 1 GE_GROUP This means that all private tags starting with 6005,xx will belong to the GE_GROUP. 7.5 STANDARD EXTENDED AND PRIVATE CONTEXT GROUPS Not applicable. 7.6 STANDARD EXTENDED AND PRIVATE TEMPLATES LOGIQ E9 supports the Standard Extended and Private Templates defined in the following sections Standard Extended Templates i. Usage and Extension of TID 5100 Vascular Ultrasound Report LOGIQ E9 supports the following template TID 5100 for SOP Instances created by this product when exam types selected are Vascular and Abdomen. NL Relation with Parent Value Type Concept Name VM Req Type Condition 1 CONTAINER EV (125100, DCM, 1 M Vascular Ultrasound Procedure Report ) > HAS OBS INCLUDE DTID (1001) Observation 1 M CONTEXT Context > CONTAINS INCLUDE DTID (5101) Vascular 1 U Patient Characteristics > CONTAINS INCLUDE DTID (5102) Vascular 1 U Procedure Summary Section > CONTAINS INCLUDE DTID (5103) Vascular 1-n U Ultrasound Section > CONTAINS INCLUDE DTID (G301) GE 1-n UC When User Ultrasound User Defined creates user Measurement defined measurements via Measurement Configuration Value Set Constraint ii. TID 5101 Vascular Patient Characteristics NL Relation with Parent Value Type Concept Name VM Req Type Condition Value Set Constraint 1 CONTAINER EV (121118, DCM, Patient Characteristics ) 1 M > CONTAINS NUM EV (121033, DCM, Subject Age ) 1 U Units = DCID (7456) Units of Measure for Age > CONTAINS CODE EV (121032, DCM, Subject Sex ) 1 U DCID (7455) Sex 55

63 > CONTAINS NUM EV (8867-4, LN, Heart Rate ) > CONTAINS NUM EV (F-008EC, SRT, Systolic Blood Pressure ) > CONTAINS NUM EV (F-008ED, SRT, Diastolic Blood Pressure ) 1 U 1 U 1 U iii. TID 5102 Vascular Procedure Summary Section NL Relation with Parent Value Type Concept Name VM Req Type 1 CONTAINER DT (121111, DCM, 1 M Summary ) > CONTAINS TEXT EV (121106, DCM, 1 M Comment ) Condition Value Set Constraint iv. TID 5103 Vascular Ultrasound Section NL Relation with Parent Value Type Concept Name VM Req Type Condition Value Set Constraint 1 CONTAINER DT (121070, DCM, Findings ) 1 M > HAS CONCEPT MOD CODE EV (G-C0E3, SRT, Finding Site ) 1 M See Table vi GEU Applications and Extensions - $SectionScope > HAS CONCEPT MOD CODE EV (G-C171, SRT, Laterality ) 1 MC IFF Laterality is defined See Table xi GE Ultrasound Sidedness and Vessel Location > HAS CONCEPT MOD CODE EV (G-0373, SRT, Image Mode ) 1 U See Table viii GE Ultrasound modes. > CONTAINS INCLUDE DTID (5104) Vascular Measurement Group 1-n M See Table v TID 5104 Vascular Ultrasound Measurement Group > CONTAINS INCLUDE DTID (300) Measurement 1-n U $Measurement = $AnatomyRatio v. TID 5104 Vascular Ultrasound Measurement Group (extended) NL Relation with Parent Value Type Concept Name VM Req Type Condition Value Set Constraint 1 CONTAINER $Anatomy GEU Parameters 1 M See Table vi GEU Applications and Extensions Anatomy GEU Parameter > HAS CONCEPT MOD CODE EV (G-A1F8, SRT, Topographical Modifier ) 1 U See Table xi GE Ultrasound Sidedness and Vessel Location 56

64 > HAS CONCEPT MOD TEXT EV (125101, DCM, Vessel Branch ) 1 UC When user name vessel more specific Vessel branch defined by user. > HAS CONCEPT MOD TEXT EV (GEU , 99GEMS, Anatomy Label) 1 UC When user insert user defined study measurements Text Value of Vessel Name or Folder > CONTAINS INCLUDE DTID (300) Measurement 1-n U $Measurement = See Table x. Vascular Base Measurement $Derivation = See DCID (3627) Measurement Type vi. GEU Applications and Extensions Section Scope DT (121070, DCM, Findings ) (T-40501, SRT, Blood Vessel of Head ) Section Laterality EV (G-C171, SRT, Finding Site ) (G-A101, SRT, Left) for Left, (G-A100, SRT, Right) for Right. Or (G-A103, SRT, Unilateral) Anatomy DCID Intracranial Cerebral Vessels Or DCID Intracranial Cerebral Vessels (Unilateral) Anatomy Ratio GEU Parameters Base Measurement Concept Name Anatomy GEU parameter ICA MCA ACA PCA PComA AComA Code and Description (T-45300, SRT, Internal Carotid Artery ) (T-45600, SRT, Middle Cerebral Artery ) (T-45540, SRT, Anterior Cerebral Artery ) (T-45900, SRT, Posterior Cerebral Artery ) (T-45320, SRT, Posterior Communicating Artery ) (T-45530, SRT, Anterior Communicating Artery ) BA (T-45800, SRT, Basilar Artery ) (T-45005, SRT, Artery of neck) (G-A101, SRT, Left) for Left, or (G-A100, SRT, Right) for Right. DCID (12104) Extracranial Arteries DCID (12123) Carotid Ratios VERT (T-45700, SRT, Vertebral Artery ) Table v.1 TCD Study Folder Code MAP Anatomy GEU parameter VERT CCA Code and Description (T-45700, SRT, Vertebral Artery ) (T-45100, SRT, Common Carotid Artery ) ICA (T-45300, SRT, Internal Carotid Artery ) BULB (T-45170, SRT, Carotid Bulb ) ECA (T-45200, SRT, External Carotid Artery ) SUBC (T-46100, SRT, Subclavian Artery ) BIF (T-45160, SRT, Carotid Bifurcation ) STA (T-45270, SRT, Superficial Temporal Artery ) Frontal Branch (T-45270, SRT, Superficial Temporal Artery ); (125101, DCM, Vessel branch ): Frontal ParietalBranch (T-45270, SRT, Superficial Temporal Artery ); (125101, DCM, Vessel branch ): Parietal Pre-Stent (GEU , 99GEMS, 'Pre-Stent') Stent (A-25500, SRT, 'Stent') Post-Stent (GEU , 99GEMS, 'Post-Stent') Table v.2 Carotid Study FOLDER Code MAPS 57

65 (T-47040, SRT, Artery of Lower Extremity ) (G-A101, SRT, Left) for Left, or (G-A100, SRT, Right) for Right. DCID (12109) Lower Extremity Arteries Anatomy GEU parameter ComIliac ExtIliac Code and Description (T-46710, SRT, Common Iliac Artery ) (T-46910, SRT, External Iliac Artery ) ComFemoral (T-47400, SRT, Common Femoral Artery ) SupFemoral (T-47403, SRT, Superficial Femoral Artery ) Popliteal (T-47500, SRT, Popliteal Artery ) AntTibial (T-47700, SRT, Anterior Tibial Artery ) PostTibial T-47600, SRT, Posterior Tibial Artery ) Peroneal (T-47630, SRT, Peroneal Artery ) DorsPedis (T-47741, SRT, Dorsalis Pedis Artery ) DeepFemoral (T-47440, SRT, Profunda Femoris Artery ) Profunda (T-47440, SRT, Profunda Femoris Artery ) Pseudo (M-32390, SRT, 'Pseudo Aneurysm') AVF (M-39390, SRT, 'AV Fistula') (T-49403, SRT, Vein of Lower Extremity ) (G-A101, SRT, Left) for Left, or (G-A100, SRT, Right) for Right. DCID (12110) Lower Extremity of Veins Graft Anatomy GEU parameter Popliteal (T-D000F, SRT, 'Vascular Graft') Table V.3 LEA STUDY Folder CODE MAPS Code and Description (T-49640, SRT, Popliteal Vein ) LSaphenous (T-49550, SRT, Lesser Saphenous Vein ) AntTibial (T-49630, SRT, Anterior Tibial Vein ) PostTibial (T-49620, SRT, Posterior Tibial Vein ) Peroneal (T-49650, SRT, Peroneal Vein ) Profunda (T-49660, SRT, Profunda Femoris Vein ) Gsaphenous (T-49530, SRT, 'Great Saphenous Vein') GreatSaphThigh (R-10259, SRT, 'Great Saphenous Vein of Thigh') GreatSaphCalf (R-1025A, SRT, 'Great Saphenous Vein of Calf') GreatSaphKnee (T-49530, SRT, 'Great Saphenous Vein') with finding side (T-D9200, SRT, Knee ) GreatSaphAnkle (T-49530, SRT, 'Great Saphenous Vein') with finding side (T-15750, SRT, Ankle ) SaphPopJunc (T-4941A,SRT, 'Saphenopopliteal junction') SmallSaphCalf (T-49550, SRT, Lesser Saphenous Vein ) w/i finding side (T-D9440, SRT, Calf of Leg ) SmallSaphAnkle (T-49550, SRT, Lesser Saphenous Vein ) w/i finding side (T-15750, SRT, Ankle ) SmallSaphCranial Ext (GEU ,GEU, 'Lesser Saphenous Vein Flows to Cranial Ext') Table V.4 LEV STUDY FOLDER CODE MAPS 58

66 (T-47020, SRT, Artery of Upper Extremity ) (G-A101, SRT, Left) for Left, or (G-A100, SRT, Right) for Right. DCID (12107) Upper Extremity Arteries Section Artery of Upper Extremity Anatomy GEU parameter Code and Description SUBC (T-46100, SRT, Subclavian artery ) Axill (T-47100, SRT, Axillary artery ) BrachialA (T-47160, SRT, Brachial artery ) RadialA (T-47300, SRT, Radial artery ) UlnarA (T-47200, SRT, Ulnar artery ) Palmar (T-47340, SRT, Deep Palmar Arch of Radial Artery ) (T-49103, SRT, Vein of Upper Extremity ) (G-A101, SRT, Left) for Left, or (G-A100, SRT, Right) for Right. DCID (12108) Upper Extremity Veins Innominate (T-46010, SRT, Innominate Artery ) Table V.5 UEA Study Folder CODE MAPS Anatomy GEU parameter JugularV Code and Description (T-48170, SRT, Internal Jugular vein ) InnoV (T-48620, SRT, Innominate vein ) SUBCV (T-48330, SRT, Subclavian vein ) AxillV (T-49110, SRT, Axillary vein ) CephV (T-49240, SRT, Cephalic vein ) BasilV (T-48052, SRT, Basilic vein ) BracV (T-49350, SRT, Brachial vein ) McubV (T-49250, SRT, Median Cubital vein ) RadialV (T-49340, SRT, Radial vein ) UlnarV (T-49330, SRT, Ulnar vein ) CephArm (T-49240, SRT, Cephalic vein ); finding side (T-D8200, SRT, Arm ) CephAntecub (T-49240, SRT, Cephalic vein ); finding side (T-49215, SRT, Antecubital Vein) CephForearm (T-49240, SRT, Cephalic vein ); finding side (T-12402, SRT, Forearm ) CephWrist (T-49240, SRT, Cephalic vein ); finding side (T-D8600, SRT, Wrist ) BasilicArm (T-48052, SRT, Basilic vein ) finding side (T-D8200, SRT, Arm ) BasilicAntecub (T-48052, SRT, Basilic vein ); finding side (T-49215, SRT, Antecubital Vein) BasilicForearm (T-48052, SRT, Basilic vein ); finding side (T-12402, SRT, Forearm ) (T-48052, SRT, Basilic vein ); finding side BasilicWrist (T-D8600, SRT, Wrist ) TABLE V.6 UEV STUDY FOLDER CODE MAPS 59

67 (T-71019, SRT, Vascular Structure of Kidney ) (G-A101, SRT, Left) for Left, or (G-A100, SRT, Right) for Right. DCID(12115) Renal Vessels DCID(12 124) Renal Ratios Anatomy GEU parameter MRenalA Code and Description (T-46600, SRT, Renal Artery ) RenalV (T-48740, SRT, Renal Vein ) SegmentalA (T-46659, SRT, Segmental Artery ) InterlobarA (T-4667D, SRT, Interlobar Artery of Kidney ) ArcurateA (T-4668A, SRT, Arcuate Artery of the Kidney ) Aorta (T-4200, SRT, Aorta ) Renal Volume (T-71000, SRT, Kidney ) Spleen (T-C3000, SRT, Spleen ) AAA (R-022CD, SRT, Aneurysm of Aortic Root ) Bladder (T-74000, SRT, Bladder ) Post Void (GEU , 99GEMS, Post Bladder ) Iliac (T-46710, SRT, Common Iliac Artery ) Renal Length (T-71000, SRT, Kidney ) TABLE V.7-1. RENAL STUDY CODE MAPS (T-46002, SRT, Artery of Abdomen ), (G-A101, SRT, Left) for Left, (G-A100, SRT, Right) for Right. Or (G-A103, SRT, Unilateral) DCID or (12112) Abdominial Arteries (unilateral) Anatomy GEU parameter Aorta Renal Length Spleen Celiac Code and Description (T-42000, SRT, Aorta ) (T-71000, SRT, Kidney ) (T-C3000, SRT, Spleen ) (T-46400, SRT, Celiac Axis ) CHA (T-46421, SRT, Common Hepatic Artery ) Splenic A (T-46460, SRT, Splenic Artery ) SMA (T-46510, SRT, Superior Mesenteric Artery ) IMA (T-46520, SRT, Inferior Mesenteric Artery ) Renal A (T-46600, SRT, Renal Artery ) CIA (T-48720, SRT, Common Iliac Artery ) Table V.8-1 Abdomen Study CODE MaPs (Page 1) Anatomy GEU parameter Code and Description Gall Bladder (T-63000, SRT, Gall Bladder ) CBD (T-60610, SRT, Bile Duct ) Liver (T-62002, SRT, Liver ) Pancreas (T-D4034, SRT, Pancreas ) TABLE V.8-2 ABDOMEN STUDY CODE MAPS (B-MODE) 60

68 (T-487A0, SRT, Vein of Abdomen) (G-A101, SRT, Left) for Left, (G-A100, SRT, Right) for Right. Or (G-A103, SRT, Unilateral) DCID or (12114) Abdominal Veins lateral (unilateral) Anatomy GEU parameter IVC CIV IIV EIV Code and Description (T-48710, SRT, Inferior Vena Cava ) (T-48920, SRT, Common Iliac Vein ) (T-48940, SRT, Internal Iliac Vein ) (T-48930, SRT, External Iliac Vein ) MPV (GEU , 99GEMS, Main Branch of Portal Vein ) PortalVein (T-48810, SRT, Portal Vein ) SMV (T-48840, SRT, Superior Mesenteric Vein ) PortalV (T-48810, SRT, Portal Vein ) SplenicV (T-48890, SRT, Splenic Vein ) IMV (T-48910, SRT, Inferior Mesenteric Vein ) HepaticV (T-48720, SRT, Hepatic Vein ) IVC (T-48710, SRT, Inferior Vena Cava ) TIPS (G-036C, SRT, Transjugular Intrahepatic Portosystemic Shunt ) RenalV (T-48740, SRT, Renal Vein ) V 9.2 Abdomen Vein Study Folder Code Maps (T-D000F, SRT, 'Vascular Graft') (G-A101, SRT, Left) for Left, (G-A100, SRT, Right) for Right. Or (G-A103, SRT, Unilateral) DCID or (12114) Abdominal Veins lateral (unilateral) Anatomy GEU parameter Limb Inflow Anast Code and Description (GEU , 99GEMS, 'Limb') (GEU , 99GEMS, 'Inflow') (M-18200, SRT, 'Anastomosis') Outflow (GEU , 99GEMS, 'Outflow') Thigh (T-D9100, SRT, 'Thigh') Knee (T-D9200, SRT, 'Knee') Calf (T-D9440, SRT, 'Calf of Leg') Ankle (T-15750, SRT, 'Ankle') RunOff (GEU , 99GEMS, 'RunOff') VGraft (T-D000F, SRT, 'Vascular Graft') Arm (T-D8200, SRT, 'Arm') Ante Cub (T-49215, SRT, 'Antecubital Vein') Forearm (T-12402, SRT, 'Forearm') Wrist (T-15460, SRT, 'Wrist joint') UserVessel (GEU , 99GEMS, 'User Vessel Anatomy') Pre-Stent (GEU , 99GEMS, 'Pre-Stent') Stent (A-25500, SRT, 'Stent') Post-Stent (GEU , 99GEMS, 'Post-Stent') vii. TID 300 Measurement (extended for Vascular) NL Relation with Parent Value Type Concept Name VM Req Type Condition Value Set Constraint 1 NUM $Measurement 1 M Units = $Units 61

69 2 > HAS CONCEPT MOD 3 > HAS CONCEPT MOD TEXT CODE EV(GEU , 99GEMS, Measurement Label) EV(GEU , 99GEMS, Measurement Label) 1 UC When Measurement is created by user (User Defined) 1 UC Only for AP or Trans Measurement Label created by User ($Label) - AP (Anterior- Posterior, DCM, ) 4 > HAS CONCEPT MOD 5 > HAS CONCEPT MOD CODE CODE EV(G-A1F8, SRT, Topographical modifier ) EV(121401, DCM, Derivation ) - Trans (Transverse, SRT, G-A117) 1 U See Table viii GE Ultrasound Sidedness and Vessel Location 1 U $Derivation 6 > HAS CONCEPT MOD CODE EV(121404, DCM, Selection Status ) 1 U $Selection Status viii. GE Ultrasound Modes GE Ultrasound Modes 2D CF PW MM CW Code Value (2D mode, SRT,G-03A2) (Doppler Color Flow, SRT,R-409E2) (Doppler Pulsed, SRT,R-409E4) (M mode, SRT,G-0394) (Doppler Continuous Wave, SRT,R-409E3) ix. GE Ultrasound Sidedness and Vessel Location Side Code Value Rt (Right, SRT,G-A100) Lt (Left, SRT,G-A101) Note (*) when there is no Sidedness or Locations, the SR nodes are not populated Vessel Location Code Value Prox (Proximal, SRT,G-A118) Mid (Mid-longitudinal, SRT,G-A188) Dist (Distal, SRT,G-A119) x. SR Mapping Table for Vascular Base Measurement Concept GEU Measurement Parameter PS ED MD Standard Measurement Concept Name ( , LN, Peak Systolic Velocity ) ( , LN, End Diastolic Velocity ) ( , LN, Minimum Diastolic Velocity ) 62

70 Tamax PI RI SD Ratio DS Ratio Accel AT TAMEAN VOLFLOW ICACCA Ratio (PS) HR (Heart Rate) RAR Table viii.1 PWD-Mode MEASUREMENTS ( , LN, Time averaged peak velocity ) ( , LN, Pulsatility Index ) ( , LN, Resistivity Index ) ( , LN, Systolic to Diastolic Velocity Ratio ) (122218, DCM, Diastolic to Systolic Velocity Ratio ) ( , LN, Acceleration Index ) ( , LN, Acceleration Time ) ( , LN, Time averaged mean velocity ) ( , LN, Volume flow ) ( , LN, ICA/CCA velocity ) (8867-4, LN, Heart Rate ) ( , LN, Renal Artery/Aorta velocity Ratio ) GEU Measurement Parameter DiamStenD1/D2 AreaStenA1/A2 StenosisD StenosisA AP Trans Volume Angle Ellipse Area SplenicJPNL SplenicJPNH SplenicIndexJPN IMT Ant Avg IMT Ant Max IMT Ant Min IMT Ant SD IMT Ant nmeas IMT Ant Dist IMT Post Avg IMT Post Max IMT Post Min IMT Post SD IMT Post nmeas IMT Post Dist Standard Measurement Concept Name (G-0364, SRT, Vessel Lumen Diameter ) (G-0366, SRT, Vessel Lumen Cross-Sectional Area ) (R-101BB, SRT, Lumen Diameter Stenosis ) (R-101BA, SRT, Lumen Area Stenosis ) (M-02550, SRT, Diameter ) with Measurement Labels (122675, DCM, Anterior-Posterior ) (M-02550, SRT, Diameter ) with Measurement Labels (G-A117, SRT, Transverse ) (G-D705, SRT, Volume ) (GEU , 99GEMS, Angle ) (125226, DCM, 'Single Plane Ellipse') (121056, DCM, 'Area Outline') (GEU , 99GEMS, 'Splenic D1') (GEU , 99GEMS, 'Splenic D2') (GEU , 99GEMS, 'Splenic Index-JP') (GEU , 99GEMS, IMT Anterior Average ) (GEU , 99GEMS, 'IMT Anterior Max') (GEU , 99GEMS, 'IMT Anterior Min') (GEU , 99GEMS, 'IMT Anterior SD') (GEU , 99GEMS, 'IMT Anterior nmeas') (GEU , 99GEMS, 'IMT Anterior Dist') (GEU , 99GEMS, 'IMT Posterior Average') (GEU , 99GEMS, 'IMT Posterior Max') (GEU , 99GEMS, 'IMT Posterior Min') (GEU , 99GEMS, 'IMT Posterior SD') (GEU , 99GEMS, 'IMT Posterior nmeas') (GEU , 99GEMS, 'IMT Posterior Dist') Table viii.2 Vascular B- MODE Measurements GEU Measurement Parameter SpleenDistL, SpleenDistH, SpleenDistW, SpeenVolume Standard Measurement Concept Name (Length, SRT,G-A22A), (Height, SRT, ), (Width, SRT, G-A220), (Volume, SRT, G-D705) inside (T-C3000, SRT, Spleen) container 63

71 RenalDistL, RenalDistH, RenalDistW, RenalVolume BladderL, BladderH, BladderW, BladderVolume LiverL, LiverW CBDporta, CBDpanc CDB PancHead. PancBody, PancDuct AAAL GBW AortaProxAP, AoProxTrans AortaMidAP, AoMidTrans (Length, SRT,G-A22A), (Height, SRT, ), (Width, SRT, G-A220), (Volume, SRT, G-D705) inside (T-71000, SRT, Kidney) container Length, SRT,G-A22A), (Height, SRT, ), (Width, SRT, G-A220), (Volume, SRT, G-D705) Inside (T-74000, SRT, Bladder) container (Length, SRT,G-A22A), (Width, SRT, G-A220) Inside (T-62002, SRT, Liver) container (GEU , 99GEMS, CBD Porta), (GEU , 99GEMS, CBD Panc) (Length, SRT,G-A22A) inside (T-60610, SRT, Bile Duct) (GEU , 99GEMS, Pancreas Head), (GEU , 99GEMS, Pancreas Body), (GEU , 99GEMS, Pancreas Duct) (Length, SRT,G-A22A) inside (R-022CD, SRT, Aneurysm of Aortic Root) (GEU ,99GEMS, Gall Bladder Wall) AP = (Diameter,SRT, M-02550), with Measurement Label (Anterior-Posterior,DCM, ), Trans = (Diameter,SRT, M-02550) with Measurement Label (Transverse,DCM, ) inside (T-4200, SRT, Aorta) with (Proximal, SRT,G-A118) as Topographical Modifier AP = (Diameter,SRT, M-02550), with Measurement Label (Anterior-Posterior,DCM, ), Trans = (Diameter,SRT, M-02550) with Measurement Label (Transverse,DCM, ) inside (T-4200, SRT, Aorta) with (Mid-longitudinal, SRT,G-A188) as Topographical Modifier AP = (Diameter,SRT, M-02550), with Measurement Label (Anterior-Posterior,DCM, ), AortaDistAP, AoDistTrans Trans = (Diameter,SRT, M-02550) with Measurement Label (Transverse,DCM, ) inside (T-4200, SRT, Aorta) with (Distal, SRT,G-A119) as Topographical Modifier AP = (Diameter,SRT, M-02550), with Measurement Label (Anterior-Posterior,DCM, ), Iliac AP, Iliac Trans Trans = (Diameter,SRT, M Table viii.3 Abdomen B- MODE Measurements with Measurement Label (Transverse, DCM, ) inside (T-46710, SRT, Common Iliac Artery) xi. TID G301 GE Ultrasound User Defined Measurement - Type: Extensible The General Ultrasound User Defined Measurement Template provides a CONTAINER with a structure for reporting user-defined measurements and calculations. The difference between this from TID 5103, TID 300 or 1414 for general measurement is the template uses labels that specified by users at configuration time rather assigning specific codes to the individual measurements. Note: In practice, to assign specific codes to user defined measurements are impractical and cumber-some since the system/organization has to maintain database/map of codes and labels with public/private code designator schemes. NL Relation with VT Concept Name VM Req Condition Value Set Constraint 64

72 Parent Type 1 CONTAINER EV (121070, DCM, Findings ) 1 M 2 > HAS CONCEPT MOD CODE EV (G-C171, SRT, Laterality ) 1 MC IFF anatomy has laterality 3 > HAS CONCEPT MOD 4 > HAS CONCEPT MOD CODE CONTAINER EV (G-0373, SRT, Image Mode ) EV (GEU , 99GEMS, User Vessel Anatomy ) or (GEU , 99GEMS, General Anatomy ) DCID (244) Laterality 1 M See Table viii. GE Ultrasound modes 1 MC IFF there exists user defined measurements Note: User Vessel Anatomy mainly used to defined vessels and using Insert Study/Vessel template. 5 >> HAS CONCEPT MOD 6 >> HAS CONCEPT MOD TEXT CODE DT (GEU , 99GEMS, Anatomy Label ) EV (G-A1F8, SRT, Topographical modifier) 7 >> CONTAIN INCLUDE DTID (300) Measurement see vii. 1 MC IFF The container uses Finding as Concept Name 1 MC IFF topographical defined General Anatomy mainly used in PWD and B-Mode and when user added individual folders and measurements. Labels from user which defined at configuration See table ix. GEU Vascular Vessel Location or DCID (12116) Vessel Segment Modifiers. 1-n M $Measurement = When Add Folder insert study measurements by prepopulated study Please refer to section v. Vascular Ultrasound Measurement Group. When individually added Add Measurement please refer to DCID (G5001) GE Defined Measurements since new measurement codes are determined by its measurement units $Units = DCID (82) Units of Measurement $Derivation = DCID (3627) Measurement Type $Selection = DCID (224) Selection Method $Label = Measurement Label created by User 65

73 xii. Context ID G5001 GE Ultrasound Defined Measurement List distance-cm cm (Distance, DCM, ) distance-mm mm (Distance, DCM, ) volume-cm3 cm3 (Volume, SNM3, G-D705) volume-mm3 mm3 (Volume, SNM3, G-D705) frequency khz (Frequency, SRT, R-407E7) frequency-h Hz (Frequency, SRT, R-407E7) area-cm2 cm2 (Area, SRT, G-A166) area-mm2 mm2 (Area, SRT, G-A166) time-s s (Time, GEU, GEU ) time-ms ms (Time, GEU, GEU ) time-min min (Time, GEU, GEU ) volume-flow ml/min (Volume Flow, LN, ) acceleration-index cm/s2 (Acceleration Index, LN, ) calculated-value no-unit (Calculated Value, GEU, GEU ) angle deg (Angle, GEU, GEU ) velocity cm/s2 (Velocity, GEU, GEU ) volume-gram g (Volume, SNM3, G-D705) volume-ml ml (Volume, SNM3, G-D705) velocity cm/s (Velocity, GEU, GEU ) weekday WeekDay (WeekDay, GEU, GEU ) date Date (Date, GEU, GEU ) percent % (Percent, GEU, GEU ) diameter-cm-m2 cm/m2 (Diameter, GEU, GEU ) volume-index ml/m2 (Volume Index, GEU, GEU ) volume-flow-ml ml/s (Volume Flow, LN, ) volume-flow-l l/s (Volume Flow, LN, ) volume-flow-l-min l/minm2 (Volume Flow, LN, ) mass-flux g/m2 (Mass Flux, GEU, GEU ) Private Templates Template ID GEMS_US_0100 ultrasound M&A document title LOGIQ E9 supports the following private templates GEMS_US_0100 for SOP Instances created by this product when exam types selected are Small Parts, Urology and Pediatrics. xiii. Private TID GEMS_US_ GE Ultrasound M&A NL Relation with Parent Value Type Concept Name VM Req Type 1 CONTAINER EV (43126, 1 M 99GEMS, Ultrasound M&A Document ) Condition Value Set Constraint 66

74 > CONTAINS UIDREF EV (43140, 99GEMS, Series Instance UID ) > CONTAINS TEXT EV( , LN, Patient Weight ) > CONTAINS TEXT EV(8302-2, LN, Patient Height ) > CONTAINS TEXT EV (43148, 99GEMS, Ultrasound Category ) > CONTAINS TEXT EV ( ,LN, Number of Fetuses ) > CONTAINS TEXT EV(43139, 99GEMS, EDD method ) 1 U 1 U 1 U 1 U 1 U 1 U xiv. Usage of TID 5000 OB-GYN Ultrasound Procedure Report LOGIQ E9 supports the following template TID 5000 for SOP Instances created by this product when exam types selected are OB and GYN. NL Relation with Parent Value Type Concept Name VM Req Type Condition Value Set Constraint 1 CONTAINER EV (125000, DCM, OB-GYN Ultrasound Procedure Report ) 1 M > HAS OBS INCLUDE DTID (1001) 1 M CONTEXT Observation Context > CONTAINS INCLUDE DTID (5001) Patient 1 U Characteristics > CONTAINS INCLUDE DTID (5002) OB-GYN 1 U Procedure Summary Section > CONTAINS INCLUDE DTID (5004) Fetal 1-n U Biometry Ratio Section > CONTAINS INCLUDE DTID (5005) Fetal 1-n U Biometry Section > CONTAINS INCLUDE DTID (5006) Long 1-n U Bones Section > CONTAINS INCLUDE DTID (5007) Fetal 1-n U Cranium Section > CONTAINS INCLUDE DTID (5009) Fetal 1-n U Biophysical Profile Section > CONTAINS INCLUDE DTID (5011) Early 1-n U Gestation Section > CONTAINS INCLUDE DTID (5010) Amniotic 1-n U Sac Section > CONTAINS INCLUDE DTID (5015) Pelvis and 1-n U Uterus Section > CONTAINS INCLUDE DTID (5012) Ovaries 1-n U Section > CONTAINS INCLUDE DTID (5013) Follicies Section 1-n U $Laterality = EV (G-A101, SRT, Left ) $Number = EV ( , LN, Number of follicles in left ovary ) 67

75 xv. TID 5001 OB-GYN Patient Characteristics NL Relation with Parent Value Type Concept Name VM Req Type Condition / Notes 1 CONTAINER EV (12118, DCM, Patient Characteristics ) M > CONTAINS TEXT EV (121106, 1 U DCM, Comment ) > CONTAINS NUM EV (8302-2, LN, Patient 1 U Height ) > CONTAINS NUM EV ( , LN, Gravida) 1 U See GEU SR Mapping Table xvi > CONTAINS NUM EV ( , LN, Para ) 1 U See GEU SR Mapping Table xvi > CONTAINS NUM EV ( ,LN, Aborta ) 1 U See GEU SR Mapping Table xvi > CONTAINS NUM EV ( , LN, Ectopic Pregnacies ) 1 U See GEU SR Mapping Table xvi xvi. GEU SR Mapping Table for Patient Characteristics: Name of GEU parameter Gravida Para Abortion Ectopic Base Measurement Concept Name ( , LN, Gravida ) ( , LN, Para ) ( , LN, Aborta ) ( , LN, Ectopic Pregnancies ) xvii. TID 5002 OB-GYN Procedure Summary Section NL Relation with Parent Value Type Concept Name VM Req Type Condition Value Set Constraint 1 CONTAINER DT(121111, DCM, Summary ) 1 M > CONTAINS DATE DCID (12003) OB- 1-n U GYN Dates > CONTAINS INCLUDE DTID (300) Measurement 1-n U $Measurement= BCID (12018) OB- GYN Summary > CONTAINS TEXT EV (121106, DCM, 1-n U Comment ) > CONTAINS INCLUDE BTID (5003) OB-GYN Fetus Summary 1-n UC No more than 1 inclusion per fetus xviii. Usage of TID 5003 OB-GYN Fetus Summary NL Relation with Parent Value Type Concept Name VM Req Type 1 CONTAINER DT (125008, DCM, 1 M Fetus Summary ) Condition Value Set Constraint 68

76 xix. > HAS OBS CONTEXT INCLUDE DTID (1008) Subject Context, Fetus 1 MC To describe n fetus, invokes this template n times GEU Parameters Map from TID 5009 Fetal Biophysical Profile Section Name of GEU parameter OB/Biophysical/movement OB/Biophysical/tone OB/Biophysical/breathing OB/Biophysical/fluid OB/Biophysical/reactiveNst OB/Biophysical/score Base Measurement Concept Name ( , LN, Gross Body Movement ) ( , LN, Fetal Tone ) ( , LN, Fetal Breathing ) ( , LN, Amniotic Fluid Volume ) ( , LN, Fetal Heart Reactivity ) ( , LN, Biophysical Profile Sum Score ) xx. GEU Parameters Map from Context ID OB-GYN Fetus Summary Name of GEU parameter OB/CUA EFW(AC,BPD) Base Measurement Concept Name ( , LN, Composite Ultrasound Age) ( , LN, Estimated Weight ) xxi. xxii. GEU Parameter Map from Context ID Ultrasound Pelvis and Uterus Name of GEU parameter Base Measurement Concept Name Gyn/2D/UtL ( , LN, Uterus Length) Gyn/2D/UtH ( , LN, Uterus Height) Gyn/2D/UtW ( , LN, Uterus Width) Gyn/2D/UtVolume ( , LN, Uterus Volume) Gyn/2D/Endo ( , LN, Endometrium Thickness ) Ob/2D/OvL with Side=Rt ( , LN, Right Ovary Length ) Ob/2D/OvH with Side=Rt ( , LN, Right Ovary Height ) Ob/2D/OvW with Side=Rt ( , LN, Right Ovary Width ) Ob/2D/OvVolume with Side=Rt ( , LN, Right Ovary Volume ) Ob/2D/OvL with Side=Lt ( , LN, Left Ovary Length ) Ob/2D/OvH with Side=Lt ( ,LN, Left Ovary Height ) Ob/2D/OvW with Side=Lt ( , LN, Left Ovary Width ) Ob/2D/OvVolume with Side=Lt ( , LN, Left Ovary Volume ) Gyn/2D/OvFoVolume/Volume (G-D705, SRT, Volume ) GEU Parameter Map from Context ID Fetal Biometry Measurements Name of GEU parameter BPD AC OFD Base Measurement Concept Name ( , LN, Biparietal Diameter ) ( , LN, Abdominal Circumference ) ( , LN, Occipital-Frontal Diameter ) 69

77 xxiii. xxiv. FL HC TAD TCD TTD Ft FTA APTD ( , LN, Femur Length ) ( , LN, Head Circumference ) ( , LN, Transverse Abdominal Diameter ) ( , LN, Trans Cerebellar Diameter ) ( , LN, Transverse Thoracic Diameter ) ( , LN, Foot length ) ( , LN, Thoracic Area ) ( , LN, Anterior-Posterior Trunk Diameter ) GEU Parameter Map from Context ID Fetal Biometry Ratios Name of GEU parameter Ratio HC/AC Ratio FL/BPD Ratio FL/AC Ratio FL/HC CI Base Measurement Concept Name ( , LN, HC/AC ) ( , LN, FL/BPD ) ( , LN, FL/AC ) ( , LN, FL/HC ) ( , LN, Cephalic Index ) GEU Parameter Map from Context ID Fetal Long Bones Measurement Name of GEU parameter TCD OOD IOD LV NT FL HL ULNA TIB FIB Radius Base Measurement Concept Name ( , LN, Trans Cerebellar Diameter ) ( , LN, Outer Orbital Diameter ) ( , LN, Inner Orbital Diameter ) ( , LN, Lateral Ventrical width ) ( , LN, Nuchal Translucency ) ( , LN, Femur Length ) ( , LN, Humerus length ) ( , LN, Ulna length ) ( , LN, Tibia length ) ( , LN, Fibula length ) ( , LN, Radius length ) xxv. CLA ( , LN, Clavicle length ) GEU Parameter Map from Context ID Gestational Age Equations and Tables Name of GEU parameter Base Measurement Concept Name Campbell/Ratio HC/AC-Min ( , LN, HC/AC by GA, Campbell 1977 ) OB/Campbell/Ratio HC/AC-Max ( , LN, HC/AC by GA, Campbell 1977 ) OB/Jeanty/BPD-GP ( , LN, BPD by GA, Jeanty 1982 ) OB/Jeanty/HC-GP ( , LN, HC by GA, Jeanty 1982 ) OB/Jeanty/FL-GP ( , LN, FL by GA, Jeanty 1982 ) 70

78 OB/Hadlock/BPD-GP ( , LN, BPD by GA, Hadlock 1984 ) OB/Hadlock/AC-GP ( , LN, AC by GA, Hadlock 1984 ) OB/Hadlock/HC-GP ( , LN, HC by GA, Hadlock 1984 ) OB/Hadlock/FL-GP ( , LN, FL by GA, Hadlock 1984 ) ASUM/BPD-GA ( , LN, BPD, ASUM 1989 ) ASUM/CRL-GA ( , LN, CRL, ASUM 1991 ) ASUM/AC-GA ( , LN, AC, ASUM 2000 ) ASUM2000/BPD-GA ( , LN, BPD, ASUM 1989 ) Eriksen/TAD-GA ( , LN, TAD, Eriksen 1985 ) OB/Goldstein/TCD-GA ( , LN, TCD, Goldstein 1987 ) OB/Hohler/FL-GA ( , LN, FL, Hohler 1982 ) OB/Jeanty/CRL-GA ( , LN, CRL, Jeanty 1982 ) OB/Jeanty/BPD-GA ( , LN, BPD, Jeanty 1982 ) OB/Jeanty/AC-GA ( , LN, AC, Jeanty 1982 ) OB/Jeanty/HC-GA ( , LN, HC, Jeanty 1982 ) OB/Jeanty/FL-GA ( , LN, FL, Jeanty 1982 ) OB/Jeanty/ULNA-GA ( , LN, Ulna, Jeanty 1984 ) OB/Jeanty/HL-GA ( , LN, Humerus, Jeanty 1984 ) OB/Jeanty/TIB-GA ( , LN, Tibia, Jeanty 1984 ) OB/Jeanty/FIB-GA ( , LN, Fibula, Jeanty 1983 ) OB/Jeanty/Radius-GA ( , LN, Radius, Jeanty 1983 ) OB/Merz/BPD-GA ( , LN, BPD, Merz 1988 ) OB/Merz/AC-GA ( , LN, AC, Merz 1988 ) OB/Merz/HC-GA ( , LN, HC Merz, 1988 ) OB/Merz/FL-GA ( , LN, FL, Merz 1988 ) OB/Hadlock/BPD-GA ( , LN, BPD, Hadlock 1984 ) OB/Hadlock/AC-GA ( , LN, AC, Hadlock 1984 ) OB/Hadlock/HC-GA ( , LN, HC, Hadlock 1984 ) OB/Hadlock/FL-GA ( , LN, FL, Hadlock 1984 ) OB/Hadlock/CRL-GA ( , LN, CRL, Hadlock 1992 ) OB/Hansmann/GS-GA ( , LN, GS, Hansmann 1979 ) OB/Hansmann/BPD-GA ( , LN, BPD, Hansmann 1985 ) OB/Hansmann/CRL-GA ( , LN, CRL, Hansmann 1985 ) OB/Hansmann/OFD-GA ( , LN, OFD, Hansmann 1985 ) OB/Hansmann/HC-GA ( , LN, HC, Hansmann 1985 ) OB/Hansmann/TAD-GA ( , LN, TAD Hansmann, 1979 ) OB/Hansmann/ThD-GA ( , LN, Transverse Thoracic Diameter, Hansmann 1985 ) OB/Hansmann/FL-GA ( , LN, FL, Hansmann 1985 ) OB/Hansmann/AC-GA ( , LN, AC, Hansmann 1985 ) OB/Hellman/GS-GA ( , LN, GS, Hellman 1969 ) OB/Rempen/GS-GA ( , LN, GS, Rempen 1991 ) OB/Rempen/CRL-GA ( , LN, CRL, Rempen 1991 ) 71

79 xxvi. xxvii. OB/Rempen/BPD-GA ( , LN, BPD, Rempen 1991 ) OB/Hill/TCD-GA ( , LN, TCD, Hill 1990 ) OB/Mercer/Ft-GA ( , LN, Foot Length, Mercer 1987 ) OB/Kurtz/BPD-GA ( , LN, BPD, Kurtz 1980 ) OB/Nelson/CRL-GA ( , LN, CRL, Nelson 1981 ) OB/Robinson/CRL-GA ( , LN, CRL, Robinson 1975 ) OB/Mayden/OOD-GA ( , LN, OOD, Mayden, 1982 ) OB/Mayden/IOD-GA ( , LN, IOD, Mayden 1982 ) OB/Yarkoni/CLA-GA ( , LN, Clavical length,yarkoni 1985 ) OB/Osaka/CRL-GA ( , LN, CRL, Osaka 1989 ) OB/Osaka/BPD-GA ( , LN, BPD, Osaka 1989 ) OB/Osaka/FL-GA ( , LN, FL, Osaka 1989 ) OB/Osaka/HL-GA ( , LN, Humerus Length, Osaka 1989 ) OB/Tokyo/GS-GA ( , LN, GS, Tokyo 1986 ) OB/Tokyo/CRL-GA ( , LN, CRL, Tokyo 1986 ) OB/Tokyo/BPD-GA ( , LN, BPD, Tokyo 1986 ) OB/Tokyo/FL-GA ( , LN, FL, Tokyo 1986 ) OB/Shinozuka/BPD-GA ( , LN, BPD, Shinozuka 1996 ) OB/Shinozuka/AC-GA ( , LN, AC, Shinozuka 1996 ) OB/Shinozuka/FL-GA ( , LN, FL, Shinozuka 1996 ) OB/Shinozuka/CRL-GA ( , LN, CRL, Shinozuka 1996 ) GEU Parameter Map from Context ID Early Gestation Biometry Name of GEU parameter Standard Concept Name CRL ( , LN, Crown Rump Length ) GS ( , LN, Gestational Sac Diameter ) NT ( , LN, Nuchal Translucency ) GEU Parameter Map from Context ID OB-GYN Amniotic Sac Name of GEU parameter Measurement Concept Name AFI1 ( , LN, First Quadrant Diameter ) AFI2 ( , LN, Second Quadrant Diameter ) AFI3 ( , LN, Third Quadrant Diameter ) AFI4 ( , LN, Fourth Quadrant Diameter ) AFI Sum ( , LN, Amniotic Fluid Index ) xxviii. GEU Parameters Map to Context ID 226 Population Statistical Descriptors Name of GEU parameter OB/ASUM/BPD-Min OB/ASUM/AC-Min OB/ASUM2000/BPD-Min OB/ASUM2000/AC-Min OB/Jeanty/AC-Min OB/Hadlock/HC-Min OB/Hadlock/FL-Min Base Measurement Concept Name (R-00388, SRT, 2 Sigma Lower Value of population ) 72

80 OB/Hansmann/BPD-Min OB/Hansmann/CRL-Min OB/Hansmann/OFD-Min OB/Hansmann/HC-Min OB/ASUM/BPD-Max OB/ASUM/AC-Max OB/ASUM2000/BPD-Max OB/ASUM2000/AC-Max OB/Jeanty/AC-Max OB/Hadlock/HC-Max OB/Hadlock/FL-Max OB/Hansmann/BPD-Max OB/Hansmann/CRL-Max OB/Hansmann/OFD-Max OB/Hansmann/ThD-Max OB/Hansmann/FL-Max OB/Rempen/GS-Max OB/Mercer/Ft-Max OB/Rempen/CRL-Max OB/Eriksen/TAD-Min OB/Jeanty/CRL-Min OB/Hadlock/CRL-Min OB/Hansmann/TAD-Min OB/Hansmann/AC-Min OB/Hellman/GS-Min OB/Hansmann/ThD-Min OB/Hansmann/FL-Min OB/Rempen/GS-Min OB/Rempen/CRL-Min OB/Mercer/Ft-Min OB/Eriksen/TAD-Max OB/Jeanty/CRL-Max OB/Hansmann/HC-Max OB/Hadlock/CRL-Max OB/Hansmann/TAD-Max OB/Hansmann/AC-Max OB/Hellman/GS-Max OB/Jeanty/BPD-Min OB/Jeanty/HC-Min OB/Jeanty/FL-Min OB/Jeanty/ULNA-Min OB/Jeanty/HL-Min OB/Jeanty/TIB-Min OB/Merz/BPD-Min OB/Merz/AC-Min OB/Merz/HC-Min OB/Merz/FL-Min OB/Hadlock/BPD-Min OB/Hadlock/AC-Min OB/Jeanty/BPD-Max OB/Jeanty/HC-Max OB/Jeanty/FL-Max OB/Jeanty/ULNA-Max OB/Jeanty/HL-Max OB/Jeanty/TIB-Max OB/Merz/BPD-Max OB/Merz/AC-Max OB/Merz/HC-Max OB/Merz/FL-Max (R-00387, SRT, 2 Sigma Upper Value of population ) (R-00347, SRT, 1 Sigma Lower Value of population ) (R-00346, SRT, 1 Sigma Upper Value of population ) (R-00397, SRT, 5th Percentile Value of population ) (R-00337, SRT, 95th Percentile Value of population ) 73

81 xxix. OB/Hadlock/BPD-Max OB/Hadlock/AC-Max GEU Parameters Map to Context ID Fetal Growth Equations and Tables OB/Jeanty/FIB-GP ( , LN, Fibula by GA, Jeanty 1983 ) OB/Jeanty/Radius-GP ( , LN, OB/Jeanty/Radius-GP ) OB/Merz/BPD-GP ( , LN, BPD by GA, Merz 1988 ) OB/Merz/AC-GP ( , LN, AC by GA, Merz 1988 ) OB/Merz/HC-GP ( , LN, HC by GA, Merz 1988 ) OB/Merz/FL-GP ( , LN, FL by GA, Merz 1988 ) OB/Hansmann/TTD-GA ( , LN, Transverse Thoracic Diameter, Hansmann 1985 ) OB/Rempen/GS-GP ( , LN, GS by GA, Rempen 1991 ) OB/Rempen/CRL-GP ( , LN, CRL by GA, Rempen1991 ) OB/Rempen/BPD-GP ( , LN, BPD by GA, Rempen 1991 ) OB/ASUM2000/OFD-GA ( , LN, OFD, ASUM 2000 ) OB/ASUM2000/CRL-GA ( , LN, CRL, ASUM 2000 ) OB/ASUM2000/HC-GA ( , LN, HC, ASUM 2000 ) OB/ASUM2000/AC-GA ( , LN, AC, ASUM 2000 ) OB/ASUM2000/HL-GA ( , LN, Humerus Length, ASUM 2000 ) xxx. Context ID 3627 Extended Measurement Types GEU parameter attribute Aver Max Min Last 'C' Concept Modifier or Has Properties (121401, DCM, Derivation ) = (R-00317, SRT, Mean ) (121401, DCM, Derivation ) = (G-A437, SRT, Maximum ) (121401, DCM, Derivation ) = (R-404FB, SRT, Minimum ) (121404, DCM, Selection Status ) = (121411, DCM, Most recent value chosen ) (121401, DCM, Derivation ) = (121428, DCM, Calculated ) xxxi. Miscellaneous GEU Parameters Map to SR Coding Standards Name of GEU parameter GA GP OOR Side=Rt Side=Lt Base Measurement Concept Name ( , LN, Gestational Age) (125012, DCM, Growth Percentile Rank) (114009,DCM, Value out of range) (G-A100, SRT, Right) (G-A101, SRT, Left) xxxii. Usage of TID 5200 Adult Echocardiography Procedure Report LOGIQ E9 supports the template TID 5200 for SOP Instances created by this product when exam types selected is Cardiography. 74

82 xxxiii. Usage of TID 2010 Key Object Selection Document LOGIQ E9 supports the template TID 2010 for SOP Instances created by this product when operators need to flag images rejected with quality reasons. 75

83 8. ANNEX E - BASIC DIRECTORY INFORMATION OBJECT IMPLEMENTATION 8.1 INTRODUCTION This section specifies the use of the DICOM Basic Directory IOD to represent the information included in directories produced by this implementation. Corresponding attributes are conveyed using the module construct. The contents of this section are: Section 8.2- IOD Module Table Section 8.3- IOD Module Definition 8.2 IOD MODULE TABLE Within an entity of the Basic Directory IOD, attributes are grouped into related set of attributes. A set of related attributes is termed a module. A module facilitates the understanding of the semantics concerning the attributes and how the attributes are related with each other. A module grouping does not infer any encoding of information into datasets. Table 8-2 identifies the defined modules within the entities, which comprise the Basic Directory IOD. See DICOM Part 3 for a complete definition of the entities, modules, and attributes. TABLE 8-1 BASIC DIRECTORY IOD MODULES Entity Name Module Name Reference File Set Identification File Set Identification Directory Information Directory Information The Directory Information Module is created when initializing the media. If it already exists, the existing information is not changed regarding patient, study, series or image data. An existing Directory Information Module may have been obtained from application entities using removable media. These instances are external to this conformance claim and the origin of the SOP instances is outside the scope of this claim. 8.3 INFORMATION MODULE DEFINITIONS Please refer to DICOM Standard Part 3 (Information Object Definitions) for a description of each of the entities and modules contained within the Basic Directory Information Object. The following modules are included to convey Enumerated Values, Defined Terms, and Optional Attributes supported. Type 1 & Type 2 Attributes are also included for completeness and to define what values they may take and where these values are obtained. It should be noted that they are the same ones as defined in the DICOM Standard Part 3 (Information Object Definitions). 76

84 8.3.1 Common File Set identification Modules File Set identification Module TABLE 8-3 FILE-SET IDENTIFICATION MODULE Attribute Name Tag Type Attribute Description File-set ID (0004,1130) 2 Has NULL value File-set Descriptor File ID (0004,1141) 3 Not used Specific Character Set of File-set Descriptor File (0004,1142) 1C Not used Common Directory Information Modules Directory Information Module TABLE 8-4 DIRECTORY INFORMATION MODULE Attribute Name Tag Type Attribute Description Offset of the First Directory Record of the Root Directory Entity Offset of the Last Directory Record of the Root Directory Entity (0004,1200) 1 Is set (0004,1202) 1 Is set File-set Consistency Flag (0004,1212) 1 FSC/FSU: Has the value 0000H: no known inconsistencies Directory Record Sequence (0004,1220) 2 Is created by FSC >Offset of the Next Directory Record (0004,1400) 1C Is set >Record In-use Flag (0004,1410) 1C FSC/FSU: Is set to FFFFH FSR: A value of 0000H: imply skipping this record. >Offset of Referenced Lower-Level Directory Entity (0004,1420) 1C Is set >Directory Record Type (0004,1430) 1C The values support by FSC and FSU are PATIENT STUDY SERIES IMAGE >Private Record UID (0004,1432) 1C Not used >Referenced File ID (0004,1500) 1C Is set if Directory Record Type is IMAGE Contains the file path consisting of 5 elements: 1. GEMS_IMG 2. Month of exam 3. Day of exam 4. Patient initials and time of exam 5. Time stamp >MRDR Directory Record Offset (0004,1504) 1C A MRDR is not created by an FSC or FSU. 77

85 Attribute Name Tag Type Attribute Description >Referenced SOP Class UID in File (0004,1510) 1C Is set to the SOP class UID in File when Directory Record Type = IMAGE >Referenced SOP Instance UID in File (0004,1511) 1C Is set to the SOP instance UID in File when Directory Record Type = IMAGE >Referenced Transfer Syntax UID in File (0004,1512) 1C Is set to the Transfer Syntax UID in File when Directory Record Type = IMAGE Definition of Specific Directory Records Patient Directory Record Definition TABLE 8-5 PATIENT KEYS Key Tag Type Attribute Description Specific Character Set (0008,0005) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6. Patient's Name (0010,0010) 2 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Patient ID (0010,0020) 1 Is filled in by FSC and FSU as in chapter 4, 5, and 6. If empty, a Patient Id is created by the equipment. Patient's Birth Date (0010,0030) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Patient's Sex (0010,0040) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Referenced Patient Sequence (0008,1120) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. >Referenced SOP Class UID (0008,1150) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6. >Referenced SOP Instance UID (0008,1155) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6. Patient's Birth Time (0010,0032) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Other Patient Ids (0010,1000) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Other Patient Names (0010,1001) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Ethnic Group (0010,2160) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Patient Comments (0010,4000) 3 Is filled in by FSC and FSU as in chapter 4, 5, and Study Directory Record Definition TABLE 8-2 STUDY KEYS Key Tag Type Attribute Description 78

86 Key Tag Type Attribute Description Specific Character Set (0008,0005) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6. Study Instance UID (0020,000D) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6. Study Date (0008,0020) 1 Is filled in by FSC and FSU as in chapter 4, 5and 6. If empty, a Study Date is created by the equipment. Study Time (0008,0030) 1 Is filled in by FSC and FSU as in chapter 4, 5, and 6. If empty, a Study Time is created by the equipment. Referring Physician's Name (0008,0090) 2 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Study ID (0020,0010) 1 Is filled in by FSC and FSU as in chapter 4, 5, and 6. If empty, a Study Id is created by the equipment. Accession Number (0008,0050) 2 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Study Description (0008,1030) 2 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Physician(s) of Record (0008,1048) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Name of Physician(s) Reading Study (0008,1060) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Referenced Study Sequence (0008,1110) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. >Referenced SOP Class UID (0008,1150) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6. >Referenced SOP Instance UID (0008,1155) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6. Admitting Diagnoses Description (0008,1080) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Patient's Age (0010,1010) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Patient's Size (0010,1020) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6.. Patient's Weight (0010,1030) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Occupation (0010,2180) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Additional Patient s History (0010,21B0) 3 Is filled in by FSC and FSU as in chapter 4, 5, and Series Directory Record Definition TABLE 8-7 SERIES KEYS Key Tag Type Attribute Description 79

87 Key Tag Type Attribute Description Specific Character Set (0008,0005) 1C Is filled in by FSC or FSU as contained in the image or SR document message, if one of the tags contains extended characters Modality (0008,0060) 1 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Series Instance UID (0020,000E) 1 Is filled in by FSC and FSU as in chapter 4, 5, and 6.. Series Number (0020,0011) 1 Is filled in by FSC and FSU as in chapter 4, 5, and 6. If empty, a Series Number is created by the equipment. Icon Image Sequence (0088,0200) 3 Not used. Series Date (0008,0021) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Series Time (0008,0031) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Performing Physicians Name (0008,1050) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Protocol Name (0018,1030) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Series Description (0008,103E) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6.. Operator s Name (0008,1070) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Referenced Performed Procedure Step Sequence (0008,1111) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. >Referenced SOP Class UID (0008,1150) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6.. >Referenced SOP Instance UID (0008,1155) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6. Request Attributes Sequence (0040,0275) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6.. >Requested Procedure ID (0040,1001) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6. >Scheduled Procedure Step ID (0040,0009) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6. >Scheduled Procedure Step Description (0040,0007) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. >Scheduled Protocol Code Sequence (0040,0008) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. >>Include Code Sequence Macro Is filled in by FSC and FSU as in chapter 4, 5, and 6. Performed Procedure Step ID (0040,0253) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6.. Performed Procedure Step Start Date (0040,0244) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Performed Procedure Step Start Time (0040,0245) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. 80

88 Key Tag Type Attribute Description Performed Procedure Step Description (0040,0254) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Performed Protocol Code Sequence (0040,0260) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. >Include Code Sequence Macro Manufacturer (0008,0070) 2 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Institution Name (0008,0080) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6.. Station Name (0008,1010) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6.. Institutional Department Name (0008,1040) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Manufacturer's Model Name (0008,1090) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6.. Software Versions (0018,1020) 3 Is filled in by FSC and FSU as in chapter 4, 5, and Image Directory Record Definition TABLE 8-8 IMAGE KEYS Key Tag Type Attribute Description Specific Character Set (0008,0005) 1C Is filled in by FSC and FSU as in chapter 4, 5, and 6. Instance Number (0020,0013) 1 Is filled in by FSC and FSU as in chapter 4, 5, and 6. If empty, a Instance Number is created by the equipment. Icon Image Sequence (0088,0200) 3 Not used Image Type (0008,0008) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Rows (0028,0010) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6.. Columns (0028,0011) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Number Of Frames (0028,0008) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Photometric Interpretation (0028,0004) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Referenced Transfer Syntax UID in File (0004,1512) 3 Is set to the Transfer Syntax UID in File Referenced SOP Instance UID in File (0004,1511) 3 Is set to the SOP instance UID in File Referenced SOP Class in File (0004,1510) 3 Is set to the SOP class UID in File 81

89 Contrast/Bolus Agent (0018,0010) 2 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Lossy Image Compression (0028,2110) 3 Is filled in by FSC and FSU as in chapter 4, 5, and 6. Lossy Image Compression Ratio (0028,2112) 3 Is filled in by FSC and FSU as in chapter 4, 5, and Private Directory Record Definition Not used Multi-Referenced File Directory Record Definition Not used. 8.4 PRIVATE DATA DICTIONARY If so configured, the product will send ultrasound raw data information in private data elements designated by the Private Creator element: Element Name Tag VR VM Description Private Creator 7FE1,00xx LO 1 GEMS_Ultrasound_MovieGroup_001 This means that all private tags starting with 7FE1,xx will belong to the GEMS_Ultrasound_MovieGroup_001. If so configured, the product will send preview image in private data elements designated by the Private Creator element: Element Name Tag VR VM Description Private Creator 6003,00xx LO 1 GEMS_Ultrasound_ImageGroup_001 This means that all private tags starting with 6003,xx will belong to the GEMS_Ultrasound_ImageGroup_

90 9. ANNEX F - MODALITY WORKLIST INFORMATION MODEL DEFINITION 9.1 INTRODUCTION This section specifies the use of the DICOM Modality Worklist Information Model used to organize data and against which a Modality Worklist Query will be performed. The contents of this section are: Section 9.2- Information Model Description Section 9.3- Information Model Entity-Relationship Model Section 9.4- Information Model Module Table Section 9.5- Information Model Keys 9.2 MODALITY WORKLIST INFORMATION MODEL DESCRIPTION This section defines the implementation of Modality Worklist Information Model. 9.3 MODALITY WORKLIST INFORMATION MODEL ENTITY-RELATIONSHIP MODEL The Entity-Relationship diagram for the Modality Worklist Information Model schema is shown in Illustration It represents the information that composes a Worklist Item. In this figure, the following diagrammatic convention is established to represent the information organization: Each entity is represented by a rectangular box. Each relationship is represented by a diamond shaped box. The fact that a relationship exists between two entities is depicted by lines connecting the corresponding entity boxes to the relationship boxes. In the event that a duplicate Study Instance UID is received, only the last record of the duplicate will be displayed. 83

91 ILLUSTRATION MODALITY WORKLIST INFORMATION MODEL E/R DIAGRAM Scheduled Procedure Step Worklist Item contained in 1 Requested Procedure requested for 1 Imaging Service Request done for Patient 1 is included 0,1 Visit Entity Descriptions Please refer to DICOM Standard PS 3.3. (Information Object Definitions) and PS 3.4 (Service Class Specifications) for a description of each of the Entities contained within the Modality Worklist Information Model Scheduled Procedure Step Schedule Procedure Step is implemented in a basic form to allow for the user to retrieve a subset of attributes Requested Procedure Entity Description Requested Procedure Step is implemented in a basic form to allow for the user to retrieve a subset of attributes. 84

92 Imaging Service Request Entity Description Image Service is implemented in a basic form to allow for the user to retrieve a subset of attributes Visit Entity Description Visit Entity is implemented in a basic form to allow for the user to retrieve a subset of attributes Patient Entity Description Patient Entity Description is implemented in a basic form to allow for the user to retrieve a subset of attributes LOGIQ E9 Mapping of DICOM entities TABLE 9-1 MAPPING OF DICOM ENTITIES TO LOGIQ E9 ENTITIES DICOM LOGIQ E9 Entity Scheduled Procedure Step Requested Procedure Imaging Service Request Visit Patient Not Applicable Exam Exam Not Applicable Patient 9.4 INFORMATION MODEL MODULE TABLE Within an entity of the DICOM Modality Worklist Information Model, attributes are grouped into related set of attributes. A set of related attributes is termed a module. A module facilitates the understanding of the semantics concerning the attributes and how the attributes are related with each other. A module grouping does not infer any encoding of information into datasets. Table Section identifies the defined modules within the entities that comprise the DICOM Modality Worklist Information Model. Modules are identified by Module Name. See DICOM PS 3.3 and PS 3.4 for a complete definition of the entities, modules, and attributes. TABLE 9-2 MODALITY WORKLIST INFORMATION MODEL MODULES 85

93 Entity Name Module Name Reference Scheduled Procedure Step SOP Common Scheduled Procedure Step Requested Procedure Requested Procedure Imaging Service Request Imaging Service Request Visit Visit Identification Visit Status Visit Relationship Visit Admission Not Used Patient Patient Relationship Not Used Patient Identification Patient Demographic Patient Medical INFORMATION MODEL KEYS Please refer to DICOM Standard PS 3.3. (Information Object Definitions) and PS 3.4 (Service Class Specifications) for a description of each of the Entities contained within the Modality Worklist Information Model. The following Module descriptions are included to specify what data elements are supported and what type of matching can be applied. It should be noted that they are the same ones as defined in the DICOM Standard PS 3.4 (Service Class Specifications). The term Instance is used for Images and Reports in examinations that are based on Worklist entries Supported Matching Following are the types of matching that can be requested by the implementation: Universal Value Matching (default). Single Value Matching. Wild Card Matching. Range of date. Fields with Matching is supported from the Notes column in Table 9-4 to 9-12 means that user can access configuration to match type which is supported above when appropriate. When user doesn t add new or configure matching, the default is Universal Matching. Fields with Filtering is supported in the Matching column can be controlled from the Search screen. All non-required matching fields can be configured in Configuration screen to be either enabled, enabled with a constant value or disabled. The constant value will be used as entered by user. Returned values, particularly those not mapped into the images or MPPSs, are viewable by the user by using the DICOM Properties button in the user interface. 86

94 9.5.2 Scheduled Procedure Step Entity SOP Common Module TABLE 9-3 SOP COMMON MODULE ATTRIBUTES Attribute Name Specific Character Set Tag Expected Matching Key Type Expected Returned Key Type Mapped into Instance/MPPS Notes (0008,0005) O 1C Yes/Yes Attribute is supported if the query contains matching keys in other than the default character repertoire. ISO_IR 100 or ISO 2022 IR 87 is supported in responses Scheduled Procedure Step Module TABLE 9-4 SCHEDULED PROCEDURE STEP MODULE ATTRIBUTES Attribute Name Tag Expected Matching Key Type Scheduled Procedure Step Sequence >Scheduled Station AE Title >Scheduled Procedure Step Start Date >Scheduled Procedure Step Start Time Expected Returned Key Type Mapped into Instance/MPPS Notes (0040,0100) R 1 No/No Matching is supported. (0040,0001) R 1 No/No Matching is supported. (0040,0002) R 1 No/No Matching is supported. Filtering is supported. Only Range Date is supported. (0040,0003) R 1 No/No Matching is supported. >Modality (0008,0060) R 1 Yes/Yes (but always US ) > Requested Contrast Agent (0032,1070) R 2C Yes/Yes (to Contrast Agent) >Scheduled Performing Physician s Name >Scheduled Procedure Step Description (0040,0006) R 2 Yes/Yes (to Performing Physician s Name) Matching is supported. Matching is supported Matching is supported. (0040,0007) O 1C Yes/Yes Matching is supported. >Scheduled Station Name (0040,0010) O 2 No/No Matching is supported. >Scheduled Procedure Step Location >Scheduled Procedure Step ID >Scheduled Protocol Code Sequence (0040,0011) O 2 No/No Matching is supported. (0040,0009) O 1 Yes/Yes Matching is supported. (0040,0008) O 1C Yes/Yes Matching is supported. 87

95 9.5.3 Requested Procedure Entity Requested Procedure Module TABLE 9-5 REQUESTED PROCEDURE MODULE ATTRIBUTES Attribute Name Tag Expected Matching Key Type Expected Returned Key Type Mapped into Instance/MPPS Requested Procedure ID (0040,1001) O 1 Yes/Yes (to Requested Procedure ID and Study ID) Requested Procedure Description Requested Procedure Code Sequence Requested Procedure Comments (0032,1060) O 1C Yes/Yes (to Study Description and Requested Procedure Description) Notes Matching is supported. Filtering is supported, except Date Range. Matching is supported. (0032,1064) O 1C No/Yes Matching is supported. (0040,1400) O 3 No/No Matching is supported. Study Instance UID (0020,000D) O 1 Yes/Yes Matching is supported. Referenced Study Sequence >Referenced SOP Class UID >Referenced SOP Instance UID (0008,1110) O 2 Yes/Yes Matching is supported. (0008,1150) O 1C Yes/Yes Matching is supported. (0008,1155) O 1C Yes/Yes Matching is supported. Names of Intended Recipients of Results (0040,1010) O 3 Yes/No (to Physician(s) of Record) Matching is supported Imaging Service Request Entity Imaging Service Request Module TABLE 9-6 IMAGING SERVICE REQUEST MODULE ATTRIBUTES Attribute Name Tag Expected Matching Key Type Expected Returned Key Type Mapped into Instance/MPPS Matching Accession Number (0008,0050) O 2 Yes/Yes Matching is supported. Filtering is supported, except Date Range. Referring Physician's Name Imaging Service Request Comments (0008,0090) O 2 Yes/No Matching is supported. (0040,2400) O 3 No/No Matching is supported. Requesting Physician (0032,1032) O 2 No/No Matching is supported. 88

96 Requesting Service (0032,1033) O 3 No/No Matching is supported Visit Entity Visit Identification TABLE 9-7 VISIT IDENTIFICATION MODULE ATTRIBUTES Attribute Name Tag Expected Matching Key Type Expected Returned Key Type Mapped into Instance/MPPS Matching Admission ID (0038,0010) O 2 No/No Matching is supported Visit Status Attribute Name Tag Expected Matching Key Type Current Patient Location TABLE 9-8 VISIT STATUS MODULE ATTRIBUTES Expected Returned Key Type Mapped into Instance/MPPS Matching (0038,0300) O 2 No/No Matching is supported Visit Relationship TABLE 9-9 VISIT RELATIONSHIP MODULE ATTRIBUTES Attribute Name Tag Expected Matching Key Type Referenced Patient Sequence >Referenced SOP Class UID >Referenced SOP Instance UID Expected Returned Key Type Mapped into Instance/MPPS Matching (0008,1120) O 2 Yes/Yes Matching is supported. (0008,1150) O 2 Yes/Yes Matching is supported. (0008,1155) O 2 Yes/Yes Matching is supported Patient Entity Patient Identification TABLE 9-10 PATIENT IDENTIFICATION MODULE ATTRIBUTES Attribute Name Tag Expected Matching Key Type Expected Returned Key Type Mapped into Instance/MPPS Matching Patient's Name (0010,0010) R 1 Yes/Yes Matching is supported. Filtering is supported, except Date Range 89

97 Patient ID (0010,0020) R 1 Yes/Yes Matching is supported. Filtering is supported, except Date Range and Wild Char. Other Patient Ids (0010,1000) O 3 Yes/No Matching is supported Patient Demographic Attribute Name Tag Expected Matching Key Type TABLE 9-11 PATIENT DEMOGRAPHIC MODULE ATTRIBUTES Expected Returned Key Type Mapped into Instance/MPPS Matching Patients Birth Date (0010,0030) O 2 Yes/Yes Matching is supported. Filtering is supported. Only Range Date is supported. Patients Birth Time (0010,0032) O 3 Yes/No Matching is supported. Only Range Date is supported. Patient's Sex (0010,0040) O 2 Yes/Yes Matching is supported. Filtering is supported except Date Range. Patient s Size (0010,1020) O 3 Yes/No Matching is supported. Patient's Weight (0010,1030) O 2 Yes/No Matching is supported. Ethnic Group (0010,2160) O 3 Yes/No Matching is supported. Patient Comments (0010,4000) O 3 Yes/No Matching is supported Patient Medical TABLE 9-12 PATIENT MEDICAL MODULE ATTRIBUTES Attribute Name Tag Expected Matching Key Type Additional Patient History Expected Returned Key Type Mapped into Instance/MPPS Matching (0010,21B0) O 3 Yes/No Matching is supported. Contrast Allergies (0010,2210) O 2 No/No Matching is supported. Medical Alerts (0010,2000) O 2 No/No Matching is supported. Pregnancy Status (0010,21C0) O 2 No/No Matching is supported. 90

98 10. ANNEX G MODALITY PERFORMED PROCEDURE STEP SOP CLASS IMPLEMENTATION 10.1 INTRODUCTION This section of the DICOM Conformance Statement specifies the Modality Performed Procedure Step SOP Class, the optional attributes and service elements supported, the valid range of values for mandatory and optional attributes, and the status code behavior MODALITY PERFORMED PROCEDURE STEP SOP CLASS DEFINITION In this section, supported means that tag is sent with value if entered by user or from worklist IOD Description This is the description of the DICOM tags to be sent for Modality Performed Procedure Step SOP class: Modality Performed Procedure Step Sop Class N-CREATE, N-SET and Final State Attributes Attribute Name Tag Req. Type N-CREATE Performed Procedure Step Relationship Scheduled Step Attribute Sequence (0040,0270) 1 Not allowed >Study Instance UID (0020,000D) 1 Not allowed >Referenced Study Sequence (0008,1110) 2, supported Not allowed >>Referenced SOP Class UID (0008,1150) 1C, supported Not allowed >>Referenced SOP Instance UID (0008,1155) 1C, supported Not allowed >Accession Number (0008,0050) 2, supported Not allowed >Placer Order Number/Imaging Service Request >Filler Order Number/Imaging Service Request (0040,2016) 3, not supported Not allowed (0040,2017) 3, not supported Not allowed >Requested Procedure ID (0040,1001) 2, supported Not allowed >Requested Procedure Description (0032,1060) 2, supported Not allowed >Scheduled Procedure Step ID (0040,0009) 2, supported Not allowed >Scheduled Procedure Step Description (0040,0007) 2, supported Not allowed >Scheduled Protocol Code Sequence (0040,0008) 2, supported Not allowed >>Include Code Sequence Macro Patient's Name (0010,0010) 2, supported Not allowed Patient ID (0010,0020) 2, supported Not allowed Patient's Birth Date (0010,0032) 2, supported Not allowed Patient's Sex (0010,0040) 2, supported Not allowed >Referenced Patient Sequence (0008,1120) 2, supported Not allowed >>Referenced SOP Class UID (0008,1150) 1C, supported Not allowed Req. Type N-SET 91

99 Attribute Name Tag Req. Type Req. Type N-CREATE N-SET >>Referenced SOP Instance UID (0008,1155) 1C, supported Not allowed Performed Procedure Step Information Performed Procedure Step ID (0040,0253) 1 Not allowed Performed Station AE Title (0040,0241) 1 Not allowed Performed Station Name (0040,0242) 2, supported Not allowed Performed Location (0040,0243) 2, supported (Institution Name, truncated if necessary to 16 characters) Not allowed Performed Procedure Step Start Date (0040,0244) 1 Not allowed Performed Procedure Step Start Time (0040,0245) 1 Not allowed Performed Procedure Step Status (0040,0252) 1 3, supported Performed Procedure Step Description (0040,0254) 2, supported 3, supported Performed Procedure Type Description (0040,0255) 2, always empty 2, always empty Procedure Code Sequence (0008,1032) 2, supported 3, supported >Include Code Sequence Macro Performed Procedure Step End Date (0040,0250) 2, always empty Performed Procedure Step End Time (0040,0251) 2, always empty Image Acquisition Results 3, supported 3, supported Modality (0008,0060) 1 Not allowed Study ID (0020,0010) 2, supported Not allowed Performed Protocol Code Sequence (0040,0260) 2, supported 3, supported >Include Code Sequence Macro Performed Series Sequence (0040,0340) 2, always empty >Performing Physician's Name (0008,1050) 2C (Required if Sequence Item is present) >Protocol Name (0018,1030) 1C (Required if Sequence Item is present) >Operator's Name (0008,1070) 2C (Required if Sequence Item is present) 1 Is Set to Performing Physician s Name. Is Set to PPS- # (with # is integer number which accumulated per system start up) Is Set to Operator s Name 92

100 Attribute Name Tag Req. Type N-CREATE >Series Instance UID (0020,000E) 1C (Required if Sequence Item is present) >Series Description (0008,103E) 2C (Required if Sequence Item is present) >Retrieve AE Title (0008,0054) 2C (Required if Sequence Item is present) >Referenced Image Sequence (0008,1140) 2C (Required if Sequence Item is present) >>Referenced SOP Class UID (0008,1150) 1C (Required if Sequence Item is present) >>Referenced SOP Instance UID (0008,1155) 1C (Required if Sequence Item is present) >Referenced Non-Image Composite SOP Instance Sequence (0040,0220) 2C (Required if Sequence Item is present) >>Referenced SOP Class UID (0008,1150) 1C (Required if Sequence Item is present) >>Referenced SOP Instance UID (0008,1155) 1C (Required if Sequence Item is present) Req. Type N-SET Is Set to Series Instance UID Is Set to Series Description Is Set to AE Title of Archive/Storage where images being stored. Is set when there is images being acquired in the series. Is set to image s SOP Class UID Is set to image s SOP Class UID Is set when there is SR generated with images. Is set to SR s SOP Class UID Is set to SR s SOP Instance UID. >Referenced Frame Number (0008,1160) 3, not supported 3, not supported Operations Action Information Covered under IOD Description in Section Service Class User Behavior LOGIQ E9 sends N-CREATE when first image in examination is acquired or when the exam is ended for the case where there are no images 93

101 LOGIQ E9 sends N-SET after the exam is ended. The N-SET will include all acquired images UIDs and the status of COMPLETED or DISCONTINUED Status Codes No Service Class specific status values are defined for the N-ACTION Service. See PS 3.7 for general response status codes. 94

102 11. ANNEX H - STORAGE COMMITMENT PUSH MODEL SOP CLASS IMPLEMENTATION 11.1 INTRODUCTION This section of the DICOM Conformance Statement specifies the Storage Commitment Push Model SOP Class, the optional attributes and service elements supported, the valid range of values for mandatory and optional attributes, and the status code behavior IMPLEMENTATION MODEL APPLICATION DATA FLOW DIAGRAM The basic data flow diagram of Storage Commitment SCU for this device are shown in the following illustration: There is only one Real-World activity that will cause the LOGIQE9 Application Entity to initiate an association to a remote DICOM entity that is a Service Class Provider (SCP) of the Storage Commitment SOP class. The Set Dataflow Real-World activity consists of an operator choosing a remote DICOM AE that supports Storage Commitment as provider as the archive device and include Storage Commit Service as part of Dataflow. End Exam Real-World activity consists of an operator choosing end exam from the scanner menu. The images to be committed are sent to the remote provider entity first. The Commitment request for the transferred image instances is sent after the complete image transfer. The Commitment response should come on a different association Action Information The following attributes are sent in N-ACTION request Attributes are sent in the N-ACTION request. Attribute Tag Value 95