EXPRESS5800/320Lb/320Lb-R EXPRESSBUILDER

Size: px
Start display at page:

Download "EXPRESS5800/320Lb/320Lb-R EXPRESSBUILDER"

Transcription

1 EXPRESS5800/320Lb/320Lb-R EXPRESSBUILDER () User s Guide

2

3 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Solutions (America), Inc. and/or its licensors. NEC Solutions (America), Inc. and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly granted to others. The NEC Solutions (America), Inc. product(s) discussed in this document are warranted in accordance with the terms of the Warranty Statement accompanying each product. However, actual performance of each product is dependent upon factors such as system configuration, customer data, and operator control. Since implementation by customers of each product may vary, the suitability of specific product configurations and applications must be determined by the customer and is not warranted by NEC Solutions (America), Inc. To allow for design and specification improvements, the information in this document is subject to change at any time, without notice. Reproduction of this document or portions thereof without prior written approval of NEC Solutions (America), Inc. is prohibited. Trademarks Adobe, Acrobat, and Reader are registered trademarks of Adobe Systems Incorporated. Microsoft, Windows and Windows 2000 are registered trademarks of Microsoft Corporation. MS-DOS is a registered trademark of Microsoft Corporation. NEC and ESMPRO are registered trademarks of NEC Solutions (America), Inc. All other trademarks and registered trademarks are the property of their respective trademark owners. PN: March 2003 Copyright 2003 NEC Solutions (America), Inc Gold Center Drive, Suite 200, Rancho Cordova, CA All Rights Reserved

4

5 Contents Using This Guide Text Conventions...vi Related Documents...vii Safety Notices...viii Safety Notices for Users Outside of the U.S.A. and Canada...ix Care and Handling...x 1 Introduction Overview EXPRESSBUILDER CD Windows 2000 Advanced Server Installation What You Need Initial Setup Install Windows Configuring for Dual LAN Configuring for Dual Disk Entering your VERITAS Volume Manager License Setting-up Your Monitoring Facility Enable Boot Monitoring Installing ESMPRO Manager Changing the TCP/IP Timeout Value Selecting Your Reporting Message Configuring your SNMP Trap Destination and Community Rights EXPRESSBUILDER Tools Tools Menu Utilities Off-line Maintenance Utility System Diagnostics Create Support Disk BIOS/FW Update System Management Function EXPRESSBUILDER with Windows EXPRESSBUILDER for Windows Online Document Setup Make OEM-Disk Update EXPRESS5800 System ESMPRO ESMPRO Agent Additional Applications MWA VERITAS Volume Manager ESMPRO Report Service for VERITAS Volume Manager Adobe Acrobat Reader Contents iii

6 A Set TCP/IP Protocols TCP/IP Protocol Settings... A-2 iv Contents

7 1 Introduction! Overview! EXPRESSBUILDER CD

8 Overview This document outlines the procedures for installing the following operating system and utilities on the EXPRESS5800/ft Series servers:! Microsoft Windows 2000 Advanced Server Operating System! ESMPRO! Management Workstation Application (MWA)! VERITAS Volume Manager. EXPRESSBUILDER is support software for the EXPRESS5800/ft Series servers. The EXPRESSBUILDER software simplifies the installation and configuration of the server. EXPRESSBUILDER CD The EXPRESSBUILDER CD contains:! Bootable EXPRESSBUILDER. Use this to install Windows 2000 Advanced Server in case of corruption or it can be used to run EXPRESS5800 utilities independently of an installed operating system.! EXPRESSBUILDER for Windows. Use this to read/print documentation and to install Adobe Acrobat Reader, ESMPRO, Management Workstation Application (MWA) or VERITAS Volume Manager. It can also be used to create an OEM diskette. Included on the EXPRESSBUILDER CD are the following utilities, drivers, and documentation:! EXPRESS5800 software utilities! EXPRESS5800 software drivers! ESMPRO! MWA Setup and Configuration Guide! EXPRESSBUILDER User s Guide (this document)! Adobe Acrobat Reader. 1-2 Introduction

9 There are several ways to use the EXPRESSBUILDER CD. You can use it to:! Boot the server from the EXPRESSBUILDER CD to install the Windows 2000 Advanced Server operating system and run several utilities (see Chapter 2).! Run the EXPRESSBUILDER for Windows to access documentation or to set up several applications (see Chapter 3). Note: The EXPRESS5800/ft Series server supports only the Windows 2000 Advanced Server Operating System. The server does not support the Windows 2000 Server or Windows NT operating systems. Introduction 1-3

10

11 2 Windows 2000 Advanced Server Installation! What You Need! Initial Setup! Install Windows 2000! Configuring for Dual LAN! Configuring for Dual Disk.! Entering your VERITAS Volume Manager License.! Setting-up Your Monitoring Facility

12 What You Need You can use EXPRESSBUILDER to reinstall the Windows 2000 Advanced Server operating system if it becomes corrupted or unusable. To reinstall Windows 2000 Advanced Server, you need the following: Initial Setup! EXPRESSBUILDER CD! Microsoft Windows 2000 Advanced Server CD! Microsoft Windows 2000 Service Pack 3 CD and above. Perform the following initial setup before doing the Windows 2000 Advanced Server installation. 1. Connect the mouse, keyboard, monitor, and any other peripherals.! CAUTION OS installation must be performed with only PCI module #1 installed and with only one hard disk drive installed in slot #1 of PCI module #1. Otherwise, the keyboard, mouse and additional hard disk drives may not be recognized.. 2. Remove PCI module #2 from the server. Refer to Chapter 4 of your user s guide for information on removing PCI modules. 3. Remove hard disk drives installed in slots #2 and #3 of PCI module #1. Refer to Chapter 4 of your user s guide for information on removing hard disk drives from PCI modules. 4. Remove any optional PCI boards installed in PCI module #1. Refer to Chapter 4 of your user s guide for information on removing PCI option boards. 5. Remove any LAN cables connected to the server. 6. Power up the server and its peripherals. 7. At the startup screen, when prompted, press F2 to enter the BIOS Setup and disable Boot Monitoring.! Select Advanced on the BIOS Setup Main Menu.! Select Monitoring Configuration on the Advanced window and press Enter.! Select Boot Monitoring and change the setting to Disabled to disable Boot Monitoring. 2-2 Windows 2000 Advanced Server Installation

13 ! Press Esc, select Exit, and select Save Changes & Exit. Press Yes at the Setup Configuration Screen. The BIOS changes are saved and the system reboots. Install Windows 2000 The system is now ready for EXPRESSBUILDER to start the Windows 2000 install procedure. 1. Insert the EXPRESSBUILDER CD in the CD-ROM drive. 2. Restart the system by either pressing Ctrl-Alt-Delete or turn system power off and back on. 3. The EXPRESSBUILDER Main menu screen displays (see the following figure). Descriptions of the icons on the screen follow the figure. SSS Tools Setup Click this icon to perform set-up of server internal parameters, hardware states, Windows 2000 installation, and several utilities. Also use Setup if the hard drive being used for installation is not the factory installed drive. Tools Click this icon to individually select and set up the utilities stored on the EXPRESSBUILDER CD. Tools sets up the utility without being influenced by the operating system. (See Chapter 3, EXPRESSBUILDER Tools for further information on the utilities.) Help Click this icon for a description of EXPRESSBUILDER. It is suggested you read this before starting Setup. Exit Click this icon to terminate the EXPRESSBUILDER. Windows 2000 Advanced Server Installation 2-3

14 Note: If using computers that communicate with the EXPRESS5800/ft Series server using TCP/IP protocols, you must make several settings to the server to minimize interruptions. See Appendix A, Setting TCP/IP Protocols for information on making the settings. Installing the Windows 2000 Advanced Server operating system overwrites the contents of the server s hard drive. If you have data you want to keep, copy and store the data on a network drive, tape drive, or other storage device. Note: If you are reinstalling Windows 2000 Advanced Server on a system disk which has been mirrored, if possible you should first use Disk Management under Computer Management to break the mirror and revert the disk mirroring the system disk to a basic disk. 4. Click the Setup icon on the EXPRESSBUILDER Main menu. A Note displays. Click Confirm. 5. A Notice screen appears asking if you want to overwrite any data currently on the system drive. Press Enter to continue. Note: Be sure to leave the EXPRESSBUILDER CD in the drive until prompted to remove. The system reboots and starts formatting the installation partition on a hard drive. When formatting is completed, the system starts copying server system software to the system. This takes about ten minutes. 6. After server system software has been copied, you are requested to remove the EXPRESSBUILDER CD from the CDROM drive AFTER pressing Enter as the reboot begins. Press Enter and as the system reboot begins, remove the CD from the CDROM drive. 7. After the system reboots, you are asked whether you wish to use an Ft update CD. Press No, if you do not have an Ft update CD. 8. You are requested to identify the language version of the Windows 2000 Advanced Server you are installing. Press E for English, F for French, G for German, I for Italian or press S for Spanish. 2-4 Windows 2000 Advanced Server Installation

15 9. At the Product ID prompt, enter the product ID using capital letters and specifying any hyphens.! Press Enter to continue.! At the Are you sure? prompt, enter Y. 10. At the partition size block, enter the size of the partition (a minimum of 2000 MB or All (to make the partition the size of the disc). Size must be entered in MB. If you enter a size greater than the capacity of the disk, then it uses the entire disk. Press Enter when done. 11. At the Are you sure? prompt, enter Y to continue. 12. At the prompt, remove the ExpressBuilder CD from the CD-ROM drive and insert the Windows 2000 CD in the drive.! Wait for the CD-ROM drive to cycle up before pressing Enter.! The system starts copying Windows 2000 to the system drive. This takes about 15 minutes to complete. 13. If you are using a Windows 2000 CD which does not include Service Pack 3 integrated, at the prompt, remove the Windows 2000 CD from the drive and insert the Windows 2000 Service Pack 3 CD into the drive; if you are using a Windows 2000 CD which does include Service Pack 3 integrated, Windows 2000 setup will begin immediately.! Wait for the CD-ROM drive to cycle up.! Press any key to continue. Leave the Service Pack CD in the drive until the installation process is completed. Note: When the system reboots during the installation, you are presented the option to boot Windows 2000 Advanced Server or a previous operating system on C: Accept the default of Windows 2000 Advanced Server and do not select the previous operating system on C: 14. Windows 2000 setup begins the process by copying files to the hard disk.! After completing file copying, the system automatically reboots.! Windows 2000 server setup continues, then reboots again.! Windows 2000 server setup automatically converts the file system to NTFS and reboots.! Windows 2000 setup continues with detecting and installing devices and components. After installing the devices and components and performing final tasks, the system reboots. Windows 2000 Advanced Server Installation 2-5

16 ! After restarting, the system displays the message Please wait while system setup is in process. This takes about 2 minutes. System displays System Settings Change dialog box asking if you want to start now. Ignore the message and wait for the system to automatically reboot. The system reboots and starts Windows 2000 Setup.! On completion, the system displays the message Windows 2000 has been installed successfully and will reboot again. 15. On completion of reboot, the following message displays: Installing EXPRESSBUILDER5800/ft series software. Please wait. This will take a while. You will see various messages flash on the screen as the installation continues. 16. The message Installing ESMPRO Agent. Please wait. displays and the Agent installs. 17. The Alert Manager is installed. 18. The Windows 2000 Service Pack Setup screen displays if installed from a separate CD. A number of hot fixes are installed. 19. The system automatically reboots, returns to Windows 2000, and displays the message Welcome to the Windows 2000 Setup Wizard. 20. At the Welcome to the Windows 2000 Setup Wizard, press Next to continue. 21. The License Agreement for Windows 2000 displays. Read the license and click I accept this agreement. If you don t accept the agreement, the installation terminates. Click Next to continue. 22. The Regional Settings screen displays. Regional settings can be customized if appropriate. Click Next to continue. 23. The Personalizing Your Software screen displays. Enter your name and organization. Click Next to continue. 24. The Licensing Modes screen displays. Select either Per Server and enter the number of concurrent connections or select Per Seat. Click Next to continue. 25. The Computer Name and Administrator Password screen displays.! Enter the computer name to be used for this server.! Enter a password for the Administrator account. Enter the password again to confirm. Click Next to continue. 26. The Date and Time Settings screen displays. Confirm or correct the displayed data and time values and select the time zone to be used. Click Next to continue. 27. The Networking Settings screen displays. Click Next to continue with the default of typical settings selected for now. 2-6 Windows 2000 Advanced Server Installation

17 28. The Workgroup or Computer Domain screen displays. Click Next to continue with the default of this computer is not on a network or is on a network without a domain, selected for now. 29. The Windows 2000 has been installed successfully screen displays and the system reboots. 30. At the Windows 2000 screen, press Ctrl Alt Del and then enter the Administrator password. Press OK to continue. The Windows 2000 desktop displays, and the Windows 2000 Advanced Server installation is complete. The setup of your system is almost complete. The following four procedures must be performed to complete the installation of your system: Note: Using Control Panel Display Settings, change the screen area resolution to at least 800 x 600 pixels.! Configure for Dual LAN (Network Adapter Teaming).! Configure for Dual Disk (Mirror System Disk).! Enter your VERITAS Volume Manager license.! Set-up your monitoring facility to be properly alerted if a module fails and needs to be replaced.! CAUTION When re-installing PCI module #2, this module should NOT have any hard disk drives installed. 1. Insert PCI module #2 into the system. Refer to Chapter 4 of your user s guide for information on installing PCI modules. No hard disk drives should be installed into PCI module #2 2. After restarting Windows 2000, confirm that the PCI modules are in duplex mode (both PCI Status LEDs are green) before proceeding to Configuring for Dual LAN in the next section. Windows 2000 Advanced Server Installation 2-7

18 Configuring for Dual LAN The server builds two dual LAN configurations using the "Stratus emp /100 Enet Adapter" and the "Stratus emb-82544gc Copper Gigabit Adapter" installed in the PCI modules. If you have installed additional adapters, you will also need to team them also. Build the dual LAN configuration as follows. 1. At the Windows 2000 desktop, click Start, point to Settings, and click Control Panel. The Control Panel screen displays. 2. Double click the Intel(r) PROSet II icon. The Intel PRO Set II screen displays. 3. Right click Network Components at the Network Component Tree. At the popup menu, select Create Team and Fault Tolerance. "Team #1: Adaptive Fault Tolerance Mode" is added to the NetWork Tree. 4. Right click Stratus emb /100 Enet Adapter at the Network Component Tree. At the popup menu, select Add to Team and Team #1: to add the adapter. A Warning screen displays. Click OK. 5. Right click Stratus emb /100 Enet Adapter #2: at the Network Component Tree. At the popup menu, select Add to Team and Team #1: to add the adapter. Note that "Preferred Primary" or "Preferred Secondary" should not be set for either adapter. 6. Right click Network Components at the Network Component Tree. At the popup menu, select Create Team and either Fault Tolerance or Load Balancing. "Team #2: Adaptive Fault Tolerance Mode" or "Team #2: Adaptive Load Balancing Mode" is added to the NetWork Tree. 7. Right click Stratus emb GC Copper Gigabit Adapter at the Network Component Tree. At the popup menu, select Add to Team and Team #2: to add the adapter. A Warning screen displays. Click OK. 8. Right click Stratus emb GC Copper Gigabit Adapter #2 at the Network Component Tree. At the popup menu, select Add to Team and Team #2: to add the adapter. 9. Click OK. The Intel PRO Set II screen closes after some period of time. The Dual LAN settings are now in effect. 2-8 Windows 2000 Advanced Server Installation

19 Configuring for Dual Disk. To achieve fault tolerance, the system disk and up to two additional disks must be mirrored in specific mirror pairs. The hard disk drive storage bays can house up to six hard disk drives, which when mirrored, results in three logical drives (see "Storage Bays" in Chapter 1 of the Express5800/320Lb/320Lb-RUser's Guide). The physical disk drive slots are numbered 1 to 3 (bottom to top) on each PCI module. Each hard disk on PCI module #1 is mirrored with the hard disk in the same slot on PCI module #2. Perform the following procedure to configure your server for mirrored disk: 1. At the Windows 2000 desktop, click Start/Programs/VERITAS/VERITAS Enterprise Administrator. On the tree window (left side panel) under local host (or the server's name) expand Disk Groups and select Basic Group. The disks are shown on the right panel of the VERITAS Enterprise Administrator screen. 2. Right click the system disk and select New Dynamic Disk Group. When the initial screen of the "Dynamic Disk Group Wizard" appears, click Next to continue. Enter DynamicGroup in the Group Name box and check the Create Windows 2000 Disk Management compatible group check box. Confirm that the system disk is selected as a member of the dynamic group and click Next. A message box is displayed stating that upgrading these disks may force a reboot - click Yes to continue. A confirmation window is displayed detailing the contents of the disks to be upgraded - click Next to continue. A message box is displayed that any file systems on the disks to be upgraded will be dismounted, and that once upgraded, prior versions of Windows can not be booted - click Yes to continue. A final confirmation window will appear. Confirm that the specification of the disk group is correct and click Finish. You are warned that a system reboot is required to complete the upgrade - click OK to reboot the system. 3. After the reboot, press Ctrl-Alt-Del to logon and enter the Administrator password. When the "System Settings Changed" message box is displayed, click Yes to restart the computer again. 4. After the reboot, press Ctrl-Alt-Del to logon and enter the Administrator password. Press OK to continue. The system returns to the Windows desktop. 5. At the Windows 2000 desktop, click Start/Programs/VERITAS/VERITAS Enterprise Administrator. On the tree window (left side panel) under local host (or the server's name) expand Disk Groups and select Basic Group. Select the Disk View tab on the right side of the VERITAS Enterprise Administrator screen. 6. Insert the PCI module #2 slot 1 disk. Windows 2000 Advanced Server Installation 2-9

20 7. If the PCI module #2 slot 1 disk is identified as having "No Disk Signature", then you should right click the disk and select Write Signature. Click Yes when asked to confirm that you wish to write a Signature for that disk. 8. If PCI module #2 slot 1 disk is displayed as a member of an unknown disk group, right click the disk and select Remove Disk from Dynamic Disk Group. When "Remove Disk" screen is displayed, ensure that the PCI module #2 slot 1 disk is selected to be removed and click OK. 9. Select the Basic Group and the PCI module #2 slot 1 disk will be displayed in the "Disk View" panel. Right click the disk and select Add Disk to Dynamic Disk Group. The "Add Disk to Disk Group Wizard" will start. Confirm that the newly inserted disk is selected as a member of the dynamic disk group created in step 2 above and click Next to continue. A confirmation screen is displayed, click Finish to complete adding the disk. 10. From the VERITAS Enterprise administrator tree window click Dynamic Group under Disk Groups. Select the Disk View tab on the right panel to display the volumes included in the Dynamic Disk Group. Right click the volume named OEM and select Mirror/Add. 11. When the Add Mirror" screen displays, click the Manually Select Disk radio button, select the new disk and click the Add button. A Volume Manager warning screen displays. Click OK. It is not necessary to modify the "boot.ini" file in order to boot from the mirror of the system disk in the Fault Tolerant environment. 12. The "VERITAS Enterprise Administrator" screen will indicate if disk mirroring is still in progress. The progress of the mirror synchronization can be monitored by clicking the Task tag at the bottom of the VERITAS Enterprise Administrator screen. The mirroring will continue even if this screen is closed. However, the system should not be rebooted until mirroring has been completed. The dual disk configuration is effective when mirroring has completed Windows 2000 Advanced Server Installation

21 Entering your VERITAS Volume Manager License. Your system has been configured with a temporary license for VERITAS Volume Manager. You ll need to enter your permanent license. 1. Launch the Volume Manager by clicking on Start/ Programs/VERITAS/ VERITAS Enterprise Administrator. 2. Select the menu Tools / System License in VERITAS Enterprise Administrator. The license screen displays. Note: Your license key certificate is located in the accessory box shipped with your Fault-Tolerant system. 3. Enter your license number and click the Replace button. 4. Click OK. You license is entered. 5. Close VERITAS Enterprise Administrator. Your permanent license is now in effect. Setting-up Your Monitoring Facility Your system includes the ESMPRO Agent installed at the factory. You ll need to setup a monitoring station to receive alerts reported by the ESMPRO Agent. Refer to the ESMPRO User s Guide located on your EXPRESSBUILDER CD for detailed information. Perform the following procedures to install and configure ESMPRO Manager on your monitoring station. Enable Boot Monitoring 1. At the startup screen, when prompted, press F2 to enter the BIOS Setup and enable Boot Monitoring.! Select Advanced on the BIOS Setup Main Menu.! Select Monitoring Configuration on the Advanced window and press Enter.! Select Boot Monitoring and change the setting to Enabled to enable Boot Monitoring.! Press Esc, select Exit, and select Save Changes & Exit. Press Yes at the Setup Configuration Screen. The BIOS changes are saved and the system reboots. Windows 2000 Advanced Server Installation 2-11

22 Installing ESMPRO Manager Note: You need a system running Windows to install ESMPRO Manager. It must be a system separate from the Fault-Tolerant system. 1. Insert the EXPRESSBUILDER CD into your monitoring station. The Master Control application screen displays. 2. Click Setup, then click ESMPRO. The ESMPRO Setup screen displays. 3. Click Manager. The setup of ESMPRO Manager displays. 4. Follow instructions on the screen to finish the ESMPRO Manager installation. Changing the TCP/IP Timeout Value Change your TCP/IP timeout value to adapt to your fault-tolerant server characteristics. This is necessary to ensure that the management system is properly communicating with the fault-tolerant system and not timing out when a CPU module is brought online on your system. 1. Launch Windows Explorer. 2. Explore the CD folder. Go to WINNT\W2K. 3. Double click FTREG.EXE. A message box displays. 4. Click OK. Another message box displays. 5. Click OK. Your TCP/IP settings have been changed. Selecting Your Reporting Message Select your reporting method for the ESMPRO Agent installed on your faulttolerant server. At a minimum you should use the SNMP method of reporting. (See below for SNMP configuration information.) To configure additional reporting methods: 1. At the Windows 2000 desktop, click Start, point to Settings, and click Control Panel. The Control Panel screen displays. 2. Double click the ESMPRO Agent icon. The ESMPRO agent screen displays. 3. Click Report Setting. The Alert Manager screen displays. Note: By using the Menus Setting/Base Setting. and Settings/Destination Settings. you can configure additional services to report alerts via , pagers, scripts, etc. Refer to the ESMPRO User s Guide on your EXPRESSBUILDER CD for more information Windows 2000 Advanced Server Installation

23 Configuring your SNMP Trap Destination and Community Rights The SNMP Service has been installed on your system. You need to set the trap destination to your monitoring station(s). 1. At the Windows 2000 desktop, click Start, point to Programs, Administrative Tools, and click Services. The Services Management Console screen displays. 2. Right click SNMP Service. Click Properties. The Properties panel displays. 3. Click the Agent tab. Setup your contact and location. 4. Click the Trap Tab. Enter Trap Destinations associated with the public community. 5. Click the Security Tab. Add a READ WRITE community right by clicking on the Add button. Note: The ESMPRO Manager will be able to monitor your system but will not be able to change threshold if you do not set a community name with the READ WRITE right. Also, it is possible but not recommended to change the rights of the public community to add the READ WRITE right, as it represents a security hole. Your Fault-Tolerant system is now monitored and ready to report events. Windows 2000 Advanced Server Installation 2-13

24

25 3 EXPRESSBUILDER Tools! Tools Menu! Utilities

26 Tools Menu Utilities You can use the Tools menu in EXPRESSBUILDER to start each of several utilities. Use the Tools menu to make settings that the setup program could not do automatically or to make detailed settings. You can also use the Tools menu when system diagnosis is to be performed or a support disk is to be created. The utilities in the Tools menu include the following. Off-line Maintenance Utility The Off-line Maintenance Utility analyzes the cause of a fault if it occurs. The Utility features the following.! IPMI Information Viewer Provides a way to view and back up the system event log (SEL), sensor data record (SDR), and field replaceable unit (FRU) information obtained through the Intelligent Platform Management Interface (IPMI). You can use this feature to obtain detailed information about system errors and events.! BIOS Setup Viewer System Diagnostics Displays and saves system BIOS setup values.! System Information Viewer Displays and saves processor, chassis, BIOS, etc. information.! System Information Management Saves and restores system NVRAM/ROM information. Executes several tests on the server to examine system features and the connections between the system and extension boards. The diagnostics require about three minutes to execute. After reviewing the results, the system must be rebooted. 3-2 ExpressBuilder Tools

27 Create Support Disk The Create Support Disk menu allows you to create a Windows 2000 OEM disk or bootable floppy disk to run EXPRESSBUILDER utilities from a floppy disk. For easy reference later, you should label each floppy disk with the displayed title. You should prepare and label the floppy disks before creating them.! Windows 2000 OEM disk for EXPRESSBUILDER A floppy disk to support the manual installation of Windows 2000 is created.! Startup FD BIOS/FW Update A bootable floppy disk is created.! Off-line Maintenance Utility Bootable FD A bootable Off-line Maintenance Utility floppy disk is created.! System Diagnostics Utility FD A bootable system diagnostic floppy disk is created. The software necessary to update the BIOS/FW is copied to a floppy disk that must already contain a BIOS/FW update module. When the system is rebooted from this floppy disk, an update program is automatically started and the BIOS/FW update will be applied. During the execution of the update program, do not turn off server power. If the update is interrupted halfway, the server cannot be started. System Management Function The System Management Function consists of the following.! Update BMC firmware The Baseboard Management Controller (BMC) firmware of the server can be updated. During the BMC firmware update, do not turn off server power. If the update is interrupted halfway, the server cannot be started. ExpressBuilder Tools 3-3

28 ! Set System Management Parameters The report and remote control features provided by BMC/RomPilot can be configured. 3-4 ExpressBuilder Tools

29 4 EXPRESSBUILDER with Windows! EXPRESSBUILDER With Windows! Online Document! Setup

30 EXPRESSBUILDER for Windows If the server has Windows installed, use this procedure to run EXPRESSBUILDER. 1. Connect the server and all peripherals. 2. Power up the server and its peripherals. 3. Log on to the system with an administrator-authorized account (e.g. administrator). 4. Insert the EXPRESSBUILDER CD in the CD-ROM drive. 5. The CD autoruns and displays the Master Control Menu. Descriptions of the menu follow the illustration. Online Document Click Online Document and the Online Document screen displays. From this screen, you can display the contents of the CD (click Summary) or display a listing of documentation on the CD (click Library). 4-2 EXPRESSBUILDER with Windows

31 Setup Click Setup and a popup screen appears. Make OEM-Disk Use Make OEM-Disk to create a Windows 2000 OEM-Disk for EXPRESSBUILDER floppy disk. The OEM-Disk contains the fault tolerant drivers and HAL required for the manual installation of Windows 2000 Advanced Server. Update EXPRESS5800 System ESMPRO The Update Express5800 System process is provided to support the manual installation of Windows It adds required fault tolerant drivers and services to the Windows 2000 installation. ESMPRO Agent If you need to load ESMPRO: 1. At the EXPRESSBUILDER Master Control Menu, click Setup and click ESMPRO at the popup. 2. The Welcome to ESMPRO Manager Setup screen displays. Click Manager and follow the prompts to complete the installation. 3. When installation is complete, close all applications, remove the CD, and reboot the system. If you need to load ESMPRO Agent (including the FT utility and BMC Configuration Tool): 1. At the EXPRESSBUILDER Master Control Menu, click Setup and click ESMPRO at the popup. The Welcome to ESMPRO Manager Setup screen displays. 2. Click ESMPRO Agent and follow the prompts to complete the installation. EXPRESSBUILDER with Windows 4-3

32 Additional Applications For additional applications listed on the ESMPRO Manager Setup screen, refer to the ESMPRO User s Guide for installation procedures. The ESMPRO User s Guide is included on the EXPRESSBUILDER CD. MWA Click MWA and follow the prompts if you need to load MWA on your system. VERITAS Volume Manager Click this item to install VERITAS Volume Manager on your system.! When the Select Installation Type screen displays, select server and click Next.! When the User Information screen displays, enter your name, organization, and license key. Note: Your software license key certificate is located in the accessory box shipped with your faulttolerant system.! When the Select Features screen displays, click the features Volume Manager MSCS Support and Volume Manager DMP Support and select entire feature will be unavailable from the popup menu.! Follow the remaining prompts to complete the installation of VERITAS Volume Manager.! Remove the EXPRESSBUILDER CD prior to rebooting. ESMPRO Report Service for VERITAS Volume Manager Click on this item to install the ESMPRO Report Service for VERITAS Volume Manager on your system. Adobe Acrobat Reader If you need the Adobe Acrobat Reader to open the pdf document files on the ExpressBuilder disk, click Adobe Acrobat Reader to load the Reader on the system. 4-4 EXPRESSBUILDER with Windows

33 A Set TCP/IP Protocols! TCP/IP Protocol Settings

34 If you have any computers that communicate with the EXPRESS5800/320Lb Series server using TCP/IP protocols, you must make several settings to the server to allow communications without interruptions. This must be done for all servers connected to the EXPRESS5800/ft server via the network. TCP/IP Protocol Settings Make the settings as follows. 1. Power up the server and its peripherals. 2. Insert the EXPRESSBUILDER CD disk in the CD-ROM drive. Immediately press and hold down the Shift key to prevent auto start. 3. In Windows Explorer or My Computer, locate the CD-ROM drive (labeled 2001 ag) containing the ExpressBuilder CD disk.! Locate the WinNT folder and double click on it.! Double click W2K.! In the W2K folder, find and copy Ftreg.exe into an arbitrary directory on your hard drive. 4. Activate the command prompt, enter the directory containing the above file copy, and then the following command: FTREG.EXE This setting avoids a timeout during initial communications between the EXPRESS5800/ft Series server and computers using TCP/IP protocols. Non-communication time starts immediately after the EXPRESS5800/ft Series server starts or a CPU module is reinstalled. The non-communication time is proportional to the size of installed memory. Memory size 256MB 512MB 1GB 2GB Non-communication time About 3.1 seconds About 6.2 seconds About 12.3 seconds About 24.7 seconds 5. The setup program automatically sets the Windows 2000 registry as follows: Registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters Values TcpMaxConnectRetransmissions Type: REG_DWORD Set value: 4 Values TcpMaxDataRetransmissions Type: REG_DWORD Set value: 7 A-2 Set TCP/IP Protocols

35 Index A Acrobat Reader installation, 4-4 B BIOS/FW update, 3-3 C Create support disk, 3-3 E ESMPRO installation, 4-3 ESMPRO Agent installation, 4-3 EXPRESSBUILDER bootable, 1-2 for Windows, 1-2 Tools menu, 3-2 utilities, drivers, documentation, 1-2 EXPRESSBUILDER with Windows installation, 4-2 online documentation, 4-2 T TCP/IP protocol settings, A-2 Tools menu EXPRESSBUILDER, 3-2 W Windows 2000 initial setup, 2-2 installation, 2-3 installation requirements, 2-2 Windows setup disable boot monitoring, 2-2, 2-11 I Initial setup Windows 2000, 2-2 Installation Windows 2000, 2-3 M Make OEM Disk, 4-3 O Off-line Maintenance Utility, 3-2 BIOS Setup Viewer, 3-2 IPMI Information Viewer, 3-2 System Information Management, 3-2 System Information Viewer, 3-2 Online documentation EXPRESSBUILDER with Windows, 4-2 Overview EXPRESSBUILDER, 1-2 S System diagnostics, 3-2 System Management Function, 3-3 Set Management Parameters, 3-4 Update BMC firmware, 3-3 Index-1

36

37

38 xx

39

EXPRESSBUILDER 3.005b-G Update Notes

EXPRESSBUILDER 3.005b-G Update Notes Express5800/320Lb Software Notes EXPRESSBUILDER 3.005b-G Update Notes Express5800/320Lb EXPRESSBUILDER 3.005b-G Update Notes Page 1 of 9 Proprietary Notice and Liability Disclaimer The information disclosed

More information

Express5800/320La System Release Notes

Express5800/320La System Release Notes System Release Notes Express5800/320La System Release Notes PN: 455-01623-003 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials,

More information

Express5800/320Lb FT Linux System Release Notes

Express5800/320Lb FT Linux System Release Notes System Release Notes Express5800/320Lb FT Linux System Release Notes PN: 455-01726-002 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and

More information

Express5800/320La Service Pack 3 Installation Notes

Express5800/320La Service Pack 3 Installation Notes Installation Notes Express5800/320La Service Pack 3 Installation Notes PN: 455-01667-000 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and

More information

. Disk Array Controller (SAS) Supplementary Setup Procedure

. Disk Array Controller (SAS) Supplementary Setup Procedure . Express Promise 5800 120Lh SuperTrak EX4650 Disk Array Controller (SAS) Supplementary Setup Procedure This page is deliberately left empty. User Guide www.nec-computers.com 100 Proprietary Notice and

More information

Express5800/120Ld System Release Notes

Express5800/120Ld System Release Notes System Release Notes Express5800/120Ld System Release Notes PN: 455-01573-002 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials,

More information

Express5800/120Rg-2 System Release Notes

Express5800/120Rg-2 System Release Notes System Release Notes Express5800/120Rg-2 System Release Notes PN: 455-01716-000 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related

More information

Installation Guide (Windows)

Installation Guide (Windows) Installation Guide (Windows) NEC Express Server Express5800 Series Express5800/R310e-E4 Express5800/R320e-E4 Express5800/R320e-M4 Express5800/R310f-E4 Express5800/R320f-E4 Express5800/R320f-M4 EXP320R,

More information

Intel Server RAID Controller U2-1 Integration Guide For Microsoft* Windows NT* 4.0

Intel Server RAID Controller U2-1 Integration Guide For Microsoft* Windows NT* 4.0 Intel Server RAID Controller U2-1 Integration Guide For Microsoft* Windows NT* 4.0 Revision 1.0 February 2000 Revision History Revision Revision History Date 1.0 Initial Release 02/10/00 Intel Corporation

More information

Express5800/120Lg System Release Notes

Express5800/120Lg System Release Notes System Release Notes Express5800/120Lg System Release Notes PN: 455-01679-002 Express5800/120Lg System Release Notes 1 Proprietary Notice and Liability Disclaimer The information disclosed in this document,

More information

Express5800/120Lg System Release Notes

Express5800/120Lg System Release Notes System Release Notes Express5800/120Lg System Release Notes PN: 455-01679-003 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials,

More information

Express5800/R120d-1M, R120d-2M

Express5800/R120d-1M, R120d-2M NEC Express Server Express5800 Series Express5800/R120d-1M, R120d-2M EXP291, EXP292 Installation Guide (Windows) Model Number: R120d-1M N8100-1794F R120d-2M N8100-1793F Chapter 1 Installing Windows Chapter

More information

NEC Express5800 Series NEC ESMPRO Agent User's Guide

NEC Express5800 Series NEC ESMPRO Agent User's Guide NEC Express5800 Series NEC ESMPRO Agent User's Guide PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable

More information

Express5800 LS2400 System Release Notes

Express5800 LS2400 System Release Notes System Release Notes Express5800 LS2400 System Release Notes PN: 455-01543-003 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related

More information

Express5800 ES1400 System Release Notes

Express5800 ES1400 System Release Notes System Release Notes Express5800 ES1400 System Release Notes PN: 904482-02 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials,

More information

NEC Express5800 Series

NEC Express5800 Series NEC Express5800 Series NEC Express5800/120Rf-1,120Rh-2 Operation Manual For Microsoft Windows Server 2003, Standard x64 Edition / Microsoft Windows Server 2003, Enterprise x64 Edition Note: Microsoft and

More information

NEC PowerMate CT Release Notes. Contents

NEC PowerMate CT Release Notes. Contents NEC PowerMate CT Release Notes Contents Applications...3 System Configuration...3 Configuring the System for Microsoft Internet Explorer Software...3 Changing Network Settings on Systems with the Microsoft

More information

NEC PowerMate 8100 Series Release Notes

NEC PowerMate 8100 Series Release Notes NEC PowerMate 8100 Series Release Notes The PowerMate 8100 Series Release Notes provide up-to-date information on installing the applications that come with your computer. These notes also provide additional

More information

Reinstalling the Operating System on the Dell PowerVault 745N

Reinstalling the Operating System on the Dell PowerVault 745N Reinstalling the Operating System on the Dell PowerVault 745N This document details the following steps to reinstall the operating system on a PowerVault 745N system: 1. Install the Reinstallation Console

More information

NOVASCALE. NovaScale T850 E1, T860 E1, R440 E1, R460 E1 and R480 E1. Windows 2008 Entreprise/Standard Installation Guide REFERENCE 86 A1 44FA 02

NOVASCALE. NovaScale T850 E1, T860 E1, R440 E1, R460 E1 and R480 E1. Windows 2008 Entreprise/Standard Installation Guide REFERENCE 86 A1 44FA 02 NovaScale T850 E1, T860 E1, R440 E1, R460 E1 and R480 E1 NOVASCALE Windows 2008 Entreprise/Standard Installation Guide REFERENCE 86 A1 44FA 02 NOVASCALE NovaScale T850 E1, T860 E1, R440 E1, R460 E1 and

More information

NEC Versa 500D/550D Windows 98 Upgrade Information

NEC Versa 500D/550D Windows 98 Upgrade Information NEC Versa 500D/550D Windows 98 Upgrade Information Follow the instructions provided in this document to upgrade your NEC Versa 500D/550D system to Microsoft Windows 98. Please read these notes in their

More information

Lesson 1: Preparing for Installation

Lesson 1: Preparing for Installation 2-2 Chapter 2 Installing Windows XP Professional Lesson 1: Preparing for Installation When you install Windows XP Professional, the Windows XP Professional Setup program allows you to specify how to install

More information

Serial ATA PCI RAID Quick Installation Guide

Serial ATA PCI RAID Quick Installation Guide Serial ATA PCI RAID Quick Installation Guide Introducing the Serial ATA PCI RAID The Serial ATA PCI RAID is an ultra high-speed two channel Serial ATA controller board for use in Pentium-class computers.

More information

ChromQuest 4.2 Chromatography Data System

ChromQuest 4.2 Chromatography Data System ChromQuest 4.2 Chromatography Data System Installation Guide CHROM-97200 Revision A April 2005 2006 Thermo Electron Corporation. All rights reserved. Surveyor is a registered trademark and ChromQuest is

More information

Before Reading This Manual This section explains the notes for your safety and conventions used in this manual.

Before Reading This Manual This section explains the notes for your safety and conventions used in this manual. Integrated Mirroring SAS User s Guide Areas Covered Before Reading This Manual Chapter 1 Chapter 2 Chapter 3 This section explains the notes for your safety and conventions used in this manual. Overview

More information

Serial ATA PCI RAID Quick Installation Guide

Serial ATA PCI RAID Quick Installation Guide Serial ATA PCI RAID Quick Installation Guide Introducing the Serial ATA PCI RAID The Serial ATA PCI RAID is an ultra high-speed two channel Serial ATA controller board for use in Pentium-class computers.

More information

FASTTRAK TX4000 QUICK START GUIDE. Version 1.2

FASTTRAK TX4000 QUICK START GUIDE. Version 1.2 FASTTRAK TX4000 QUICK START GUIDE Version 1.2 FastTrak TX4000 Copyright 2002 Promise Technology, Inc. Copyright by Promise Technology, Inc. (Promise Technology). No part of this manual may be reproduced

More information

ProcessLogix R510.0 Server Installation Instructions

ProcessLogix R510.0 Server Installation Instructions ProcessLogix R510.0 Server Installation Instructions Installation Instructions Before you begin... This publication guides you through the remaining processes required to initialize a ProcessLogix Server.

More information

Exam : Title. : A+ OS Technologies

Exam : Title. : A+ OS Technologies Exam : 220-302 Title : A+ OS Technologies QUESTION 1 Under Windows 2000 you consistently receive out of memory messages when running multiple applications. To avoid having to upgrade RAM immediately you?

More information

PCI/PXI Gigabit Ethernet Adapters

PCI/PXI Gigabit Ethernet Adapters INSTALLATION GUIDE PCI/PXI Gigabit Ethernet Adapters Installing Your PXI Board National Instruments gigabit Ethernet adapters are based on the Intel 82540-compatible Ethernet controller. This document

More information

1. Save the Express BIOS update file to a temporary directory on the target PC. 2. Double-click the *.EXE file to run the Express BIOS update.

1. Save the Express BIOS update file to a temporary directory on the target PC. 2. Double-click the *.EXE file to run the Express BIOS update. BIOS Update Readme BIOS Update Instructions for Intel Desktop Boards This Readme file includes BIOS update instructions for advanced users. If you need more complete step-by-step instructions on how to

More information

NEC ESMPRO Manager Ver.6 Setup Guide

NEC ESMPRO Manager Ver.6 Setup Guide NEC ESMPRO Manager Ver.6 Setup Guide Chapter1 Setup for Managed Component in which EXPRESSSCOPE Engine 3 is integrated Chapter2 Setup for Managed Component in which a BMC excluding EXPRESSSCOPE Engine

More information

Windows* 2003 Cluster Implementation Guide for the Intel RAID controller SRCU42X

Windows* 2003 Cluster Implementation Guide for the Intel RAID controller SRCU42X Windows* 2003 Cluster Implementation Guide for the Intel RAID controller SRCU42X Revision 1.0 May 2003 Enterprise Platforms and Services Marketing Disclaimers Information in this document is provided in

More information

SUPERTRAK EX8300, EX8350 RAID 6 UPGRADE & PRIMER

SUPERTRAK EX8300, EX8350 RAID 6 UPGRADE & PRIMER SUPERTRAK EX8300, EX8350 RAID 6 UPGRADE & PRIMER Version 1.1 2005 Promise Technology, Inc. All rights reserved. SuperTrak EX8300, EX8350 RAID 6 Upgrade & Primer Copyright 2005 Promise Technology, Inc.

More information

About Your Software Windows NT Workstation 4.0 Windows 98 Windows 95 Applications and Support Software

About Your Software Windows NT Workstation 4.0 Windows 98 Windows 95 Applications and Support Software IBM Personal Computer About Your Software Windows NT Workstation 4.0 Windows 98 Windows 95 Applications and Support Software IBM Personal Computer About Your Software Windows NT Workstation 4.0 Windows

More information

HP ProLiant ML150 Server NOS Installation and Software Guide. November 2003 (Second Edition) Part Number

HP ProLiant ML150 Server NOS Installation and Software Guide. November 2003 (Second Edition) Part Number HP ProLiant ML150 Server NOS Installation and Software Guide November 2003 (Second Edition) Part Number 343330-002 2003 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows NT are

More information

AST2500 ibmc Configuration Guide

AST2500 ibmc Configuration Guide AST2500 ibmc Configuration Guide Version 1.0b Copyright Copyright 2017 MITAC COMPUTING TECHNOLOGY CORPORATION. All rights reserved. No part of this manual may be reproduced or translated without prior

More information

Installing the IBM ServeRAID Cluster Solution

Installing the IBM ServeRAID Cluster Solution Installing the IBM ServeRAID Cluster Solution For IBM Netfinity ServeRAID-4x Ultra160 SCSI Controllers Copyright IBM Corp. 2000 1 2 IBM Netfinity Installing the IBM ServeRAID Cluster Solution Chapter 1.

More information

NEC ESMPRO Manager Ver.6 Setup Guide

NEC ESMPRO Manager Ver.6 Setup Guide Front Cover NEC ESMPRO Manager Ver.6 Setup Guide Chapter 1 Setup for Managed Component integrated EXPRESSSCOPE Engine 3 Chapter 2 Setup for Managed Component integrated BMC excluding EXPRESSSCOPE Engine

More information

Magic Card User Manual

Magic Card User Manual Table of Contents Magic Card User Manual Magic Card Introduction 2 What is Magic card? 2 Magic Card Features 2 Working Modes 3 Magic card editions 3 Installation 4 System Requirements 4 Pre-installation

More information

NEC PowerMate ES SlimLine Series Release Notes. Contents

NEC PowerMate ES SlimLine Series Release Notes. Contents NEC PowerMate ES SlimLine Series Release Notes Contents Warning for Using Your Computer...3 Applications...3 System Configuration...3 Configuring the System for Microsoft Internet Explorer Software...3

More information

Universal RAID Utility

Universal RAID Utility Universal RAID Utility () User Guide Universal RAID Utility User's Guide 4th Edition October 2008 PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs

More information

HP Server Novell NetWare Installation Guide

HP Server Novell NetWare Installation Guide HP Server Novell NetWare Installation Guide Including 6.5 August 25, 2003 Objective The intent of this document is to provide you with key information required for completing the installation of NetWare

More information

3 INSTALLING WINDOWS XP PROFESSIONAL

3 INSTALLING WINDOWS XP PROFESSIONAL INSTALLING WINDOWS XP PROFESSIONAL.1 Preparing for installation Objectives.1.1 Windows XP Professional Hardware Requirements.1.2 Hardware Compatibility List (HCL) check.1. Hard Disk Partition.1.4 Required

More information

NEC Versa LX (AGP Video) Important Information

NEC Versa LX (AGP Video) Important Information NEC Versa LX (AGP Video) Important Information Congratulations on purchasing an NEC Versa LX (AGP Video) notebook computer! Before using your system, complete the installation process and read the important

More information

NEC PowerMate VT 300 Series Release Notes

NEC PowerMate VT 300 Series Release Notes NEC PowerMate VT 300 Series Release Notes The PowerMate VT 300 Series Release Notes provide up-to-date information on installing the applications that come with your computer. These notes also provide

More information

IBM Personal Computer. About Your Software Windows NT Workstation 4.0, Applications, and Support Software

IBM Personal Computer. About Your Software Windows NT Workstation 4.0, Applications, and Support Software IBM Personal Computer About Your Software Windows NT Workstation 4.0, Applications, and Support Software IBM Personal Computer About Your Software Windows NT Workstation 4.0, Applications, and Support

More information

Veritas Backup Exec Quick Installation Guide

Veritas Backup Exec Quick Installation Guide Veritas Backup Exec Quick Installation Guide Legal Notice Copyright 2017 Veritas Technologies LLC. All rights reserved. Veritas and the Veritas Logo are trademarks or registered trademarks of Veritas Technologies

More information

FAS Asset Accounting FAS Asset Inventory FAS CIP Accounting Network Installation & Administration Guide Version

FAS Asset Accounting FAS Asset Inventory FAS CIP Accounting Network Installation & Administration Guide Version FAS Asset Accounting FAS Asset Inventory FAS CIP Accounting Network Installation & Administration Guide Version 2009.1 2009 Sage Software, Inc. All rights reserved. Portions Copyrighted 1991-2001 by ianywhere

More information

Installation Guide. EventTracker Enterprise. Install Guide Centre Park Drive Publication Date: Aug 03, U.S. Toll Free:

Installation Guide. EventTracker Enterprise. Install Guide Centre Park Drive Publication Date: Aug 03, U.S. Toll Free: EventTracker Enterprise Install Guide 8815 Centre Park Drive Publication Date: Aug 03, 2010 Columbia MD 21045 U.S. Toll Free: 877.333.1433 Abstract The purpose of this document is to help users install

More information

About Your Software IBM

About Your Software IBM About Your Software About Your Software Note Before using this information and the product it supports, be sure to read Appendix. Viewing the license agreement on page 19 and Notices on page 21. First

More information

SUPERSCRIPT 1800 NETWORK USER S GUIDE. July, A

SUPERSCRIPT 1800 NETWORK USER S GUIDE. July, A SUPERSCRIPT 1800 NETWORK USER S GUIDE July, 1999 808-878291-011A Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials, is

More information

READ ME FIRST. Windows NT. *DSL Equipment Installation Guide: Efficient Networks 5260

READ ME FIRST. Windows NT. *DSL Equipment Installation Guide: Efficient Networks 5260 READ ME FIRST Windows NT *DSL Equipment Installation Guide: Efficient Networks 5260 *Digital Subscriber Line Part Number: 5260NT02A Version 1.2-A. Table of Contents Follow Steps 1 through 8 to complete

More information

RAID User Guide. Edition. Trademarks V1.0 P/N: U25-A2-0E

RAID User Guide. Edition. Trademarks V1.0 P/N: U25-A2-0E RAID User Guide Edition V1.0 P/N: 91-187-U25-A2-0E Trademarks All brand or product names mentioned are trademarks or registered trademarks of their respective holders. 1 2004-12-15, 9:01 Contents Intel

More information

Partitioning and Formatting Guide

Partitioning and Formatting Guide Partitioning and Formatting Guide Version 1.2 Date 05-15-2006 Partitioning and Formatting Guide This guide is designed to explain how to setup your drive with the correct partition and format for your

More information

PAL Installation Instructions

PAL Installation Instructions PAL Installation Instructions ADMINISTRATOR (NETWORK) INSTALLS These instructions are for PCs that are connected by a network, for the purpose of sharing PAL data and notes. PAL can be installed using

More information

Windows Server 2003 RUR2 (Service Pack 2)

Windows Server 2003 RUR2 (Service Pack 2) Windows Server 2003 RUR2 (Service Pack 2) () Installation Manual NovaScale and Express5800 Series Microsoft Windows Server 2003 R2 x64 Editions / Microsoft Windows Server 2003 x64 Editions RUR2 (Service

More information

10ZiG Technology. Thin Desktop Quick Start Guide

10ZiG Technology. Thin Desktop Quick Start Guide 10ZiG Technology Thin Desktop Quick Start Guide 2010 05 20 Introduction This document is intended as a quick start guide for installing Thin Desktop. After reading this document, you will know how to:

More information

Guide to SATA Hard Disks Installation and RAID Configuration

Guide to SATA Hard Disks Installation and RAID Configuration Guide to SATA Hard Disks Installation and RAID Configuration 1. Guide to SATA Hard Disks Installation... 2 1.1 Serial ATA (SATA) Hard Disks Installation... 2 2. Guide to RAID Configurations... 3 2.1 Introduction

More information

Addendum SUPERSCRIPT 4400 SERIES USER S GUIDE. February, A

Addendum SUPERSCRIPT 4400 SERIES USER S GUIDE. February, A Addendum SUPERSCRIPT 4400 SERIES USER S GUIDE February, 1999 703-A0323-001 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials,

More information

AST2500 ibmc Configuration Guide

AST2500 ibmc Configuration Guide AST2500 ibmc Configuration Guide Version 1.0 Copyright Copyright 2017 MITAC COMPUTING TECHNOLOGY CORPORATION. All rights reserved. No part of this manual may be reproduced or translated without prior written

More information

Fujitsu LifeBook A Series

Fujitsu LifeBook A Series Fujitsu LifeBook A Series BIOS Guide LifeBook A Series Model: AH530 Document Date: 06/09/2010 Document Part Number: FPC58-2714-01 FUJITSU AMERICA, INC. 1 LifeBook PH520 BIOS A Series BIOS BIOS SETUP UTILITY

More information

SATARaid Serial ATA RAID Management Software

SATARaid Serial ATA RAID Management Software SATARaid Serial ATA RAID Management Software 05/12/04 Silicon Image, Inc. 1060 East Arques Ave. Sunnyvale CA 94085 (408) 616-4000 www.siliconimage.com Copyright 2003, Silicon Image, Inc. All rights reserved.

More information

Express5800/320Ma: System Administrator s Guide

Express5800/320Ma: System Administrator s Guide Express5800/320Ma: System Administrator s Guide NEC Solutions (America), Inc. NR014W Notice The information contained in this document is subject to change without notice. UNLESS EXPRESSLY SET FORTH IN

More information

Veritas System Recovery Disk Help

Veritas System Recovery Disk Help Veritas System Recovery Disk Help About recovering a computer If Windows fails to start or does not run normally, you can still recover your computer. You can use the Veritas System Recovery Disk and an

More information

NEC Express5800 Series NEC ESMPRO Manager User's Guide

NEC Express5800 Series NEC ESMPRO Manager User's Guide NEC Express5800 Series NEC ESMPRO Manager User's Guide 07-2008 PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the

More information

Quick Setup & Getting Started

Quick Setup & Getting Started Quick Setup & Getting Started HP Compaq Business PC Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft, Windows, and

More information

ProLiant Cluster HA/F500 for Enterprise Virtual Array Introduction Software and Hardware Pre-Checks Gathering Information...

ProLiant Cluster HA/F500 for Enterprise Virtual Array Introduction Software and Hardware Pre-Checks Gathering Information... Installation Checklist HP ProLiant Cluster F500 for Enterprise Virtual Array 4000/6000/8000 using Microsoft Windows Server 2003, Enterprise Edition Stretch Cluster May 2005 Table of Contents ProLiant Cluster

More information

DP SATA 6Gb/s PCIe i/e Quick Installation Guide

DP SATA 6Gb/s PCIe i/e Quick Installation Guide DP SATA 6Gb/s PCIe i/e Quick Installation Guide Introducing the SATA 6Gb/s PCIe i/e The DP SATA 6Gb/s PCIe i/e adds 2 SATA 6Gb/s & a PATA connectors to PCIe-equipped computers. Features and Benefits Dual

More information

Appendix A: Metasys Web Access (MWA) Server Installation Guidelines

Appendix A: Metasys Web Access (MWA) Server Installation Guidelines Technical Bulletin Issue Date February 26, 2003 Appendix A: Metasys Web Access (MWA) Server Installation Guidelines Appendix A: Metasys Web Access Server Installation Guidelines...2 Introduction... 2 Detailed

More information

Oracle Enterprise Single Sign-on Logon Manager. Installation and Setup Guide Release E

Oracle Enterprise Single Sign-on Logon Manager. Installation and Setup Guide Release E Oracle Enterprise Single Sign-on Logon Manager Installation and Setup Guide Release 10.1.4.1.0 E12635-01 March 2009 Oracle Enterprise Single Sign-on, Installation and Setup Guide, Release 10.1.4.1.0 E12635-01

More information

DCN Software Installation Instructions. en Software Installation Instructions

DCN Software Installation Instructions. en Software Installation Instructions DCN Software Installation Instructions en Software Installation Instructions DCN Software Installation Instructions en 3 Table of contents 1 Introduction... 4 2 Installing the DCN software... 5 3 Installation

More information

Staff Workstation Model 795

Staff Workstation Model 795 Staff Workstation Model 795 Administrator s Guide 3M Library Systems 3M Center, Building 225-4N-14 St. Paul, Minnesota 55144-1000 www.3m.com/library Copyright 2002, 2005 3M. All rights reserved. 78-8123-9059-5

More information

NEC Versa 4200 Windows 98 Upgrade Information

NEC Versa 4200 Windows 98 Upgrade Information NEC Versa 4200 Windows 98 Upgrade Information Follow the instructions provided in this document to upgrade your NEC Versa 4200 system to Microsoft Windows 98. Please read these notes in their entirety.

More information

HP Server tc2110 Network Operating System Installation Guide

HP Server tc2110 Network Operating System Installation Guide HP Server tc2110 Network Operating System Installation Guide For: Microsoft Windows NT 4.0 Server Microsoft Windows 2000 Server and Microsoft Small Business Server 2000 Novell NetWare 5.1 and Novell Small

More information

Perle 594M Getting Started

Perle 594M Getting Started Perle 594M Getting Started 95-2512-00 Copyrights FCC/DOC Compliance Copyright 1999, Perle Systems Limited and its suppliers. IBM, AT, CA/400, and PC Support/400 are registered trade marks of International

More information

PS-4700/4800Series User ユーザーマニュアル Hardware Manual Manual

PS-4700/4800Series User ユーザーマニュアル Hardware Manual Manual PS-4700/4800Series シリーズ User ユーザーマニュアル GP-4000 Pro-face Manual Series Remote HMI Server Hardware Manual Manual (Atom N270/Core 2 Duo 2 Duo P8400 P8400 Pre-installed 搭載モデル Model) ) Preface Thank you for

More information

IBM Personal Computer. About Your Software Windows 95, Applications, and Support Software

IBM Personal Computer. About Your Software Windows 95, Applications, and Support Software IBM Personal Computer About Your Software Windows 95, Applications, and Support Software IBM Personal Computer About Your Software Windows 95, Applications, and Support Software IBM Note Before using

More information

Automating the Windows 2000 Installation

Automating the Windows 2000 Installation Chapter 2 Automating the Windows 2000 Installation MICROSOFT EXAM OBJECTIVES COVERED IN THIS CHAPTER Perform an unattended installation of Windows 2000 Professional. Install Windows 2000 Professional by

More information

EMBEDDED WINDOWS NT 4.0 PRODUCT NOTES

EMBEDDED WINDOWS NT 4.0 PRODUCT NOTES EMBEDDED WINDOWS NT 4.0 PRODUCT NOTES Introduction This document describes setup requirements and setup options of Embedded Windows NT 4.0 (ENT), as well as a recovery strategy should the original CompactFlash

More information

ver Sound Editor for MAGICSTOMP ver is for units using version 2.10 firmware or greater.

ver Sound Editor for MAGICSTOMP ver is for units using version 2.10 firmware or greater. ver. 2.10 Sound Editor for ver. 2.10 is for units using version 2.10 firmware or greater. SPECIAL NOTICES The software and this are exclusive copyrights of Yamaha Corporation. Copying of the software or

More information

Fast SCSI Pro Quick Installation Guide

Fast SCSI Pro Quick Installation Guide Introducing Your Fast SCSI Pro Your Fast SCSI Pro is a high performance, Plug-and-Play PCI-bus master SCSI host adapter which supports connectivity to up to seven external SCSI devices. These devices include:

More information

NEC PowerMate 2000 Series Release Notes. Contents

NEC PowerMate 2000 Series Release Notes. Contents NEC PowerMate 2000 Series Release Notes Contents Applications... 3 Installing Applications in the Correct Order... 3 Installing NEC SNMP Agent... 3 Uninstalling the NEC SNMP Agent or LANDesk Client Manager...

More information

EMC NetWorker Module for SnapImage Release 2.0 Microsoft Windows Version

EMC NetWorker Module for SnapImage Release 2.0 Microsoft Windows Version EMC NetWorker Module for SnapImage Release 2.0 Microsoft Windows Version Installation and Administration Guide P/N 300-007-130 REV A01 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000

More information

FASTTRAK S150 TX4 USER MANUAL. Version 1.5M

FASTTRAK S150 TX4 USER MANUAL. Version 1.5M FASTTRAK S150 TX4 USER MANUAL Version 1.5M FastTrak S150 TX4 User Manual Copyright 2003 Promise Technology, Inc. All Rights Reserved. Copyright by Promise Technology, Inc. (Promise Technology). No part

More information

Fujitsu LifeBook E Series

Fujitsu LifeBook E Series Fujitsu LifeBook E Series BIOS Guide LifeBook E Series Models: E2010 Document Date: 02/05/03 Document Part Number: FPC58-0881-01 F U J I T S U P C C O R P O R A T I O N 1 LifeBook E Series BIOS E Series

More information

Installing the Operating System or Hypervisor

Installing the Operating System or Hypervisor If you purchased E-Series Server or NCE Option 1 (E-Series Server or NCE without a preinstalled operating system or hypervisor), you must install an operating system or hypervisor. This chapter includes

More information

Installation Guide Install Guide Centre Park Drive Publication Date: Feb 11, 2010

Installation Guide Install Guide Centre Park Drive Publication Date: Feb 11, 2010 EventTracker Install Guide 8815 Centre Park Drive Publication Date: Feb 11, 2010 Columbia MD 21045 U.S. Toll Free: 877.333.1433 Abstract The purpose of this document is to help users install and configure

More information

Upgrade Guide. BCM Business Communications Manager

Upgrade Guide. BCM Business Communications Manager Upgrade Guide BCM50 2.0 Business Communications Manager Document Status: Standard Document Number: NN40020-401 Document Version: 01.01 Part Code: N0107119 Date: October 2006 Copyright 2006 Nortel Networks,

More information

WJ-ND200K WJ-ND200K/G

WJ-ND200K WJ-ND200K/G Administrator Console Operating Instructions WJ-ND200K WJ-ND200K/G Model Nos. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future

More information

Dell PowerEdge 6 Gbps SAS HBA and Internal Tape Adapter. User s Guide

Dell PowerEdge 6 Gbps SAS HBA and Internal Tape Adapter. User s Guide Dell PowerEdge 6 Gbps SAS HBA and Internal Tape Adapter User s Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION:

More information

AMD RAID Installation Guide

AMD RAID Installation Guide AMD RAID Installation Guide 1. AMD BIOS RAID Installation Guide.. 3 1.1 Introduction to RAID.. 3 1.2 RAID Configurations Precautions 4 1.3 Installing Windows 8 / 8 64-bit / 7 / 7 64-bit / Vista / Vista

More information

Sidewinder. Hardware Guide Models S1104, S2008, S3008. Revision E

Sidewinder. Hardware Guide Models S1104, S2008, S3008. Revision E Sidewinder Hardware Guide Models S1104, S2008, S3008 Revision E Table of contents Preface...3 Find product documentation... 3 1 Introducing the appliances... 4 Models and features... 4 Supported software...

More information

4190 Information Management System (IMS) Software Upgrade Instructions

4190 Information Management System (IMS) Software Upgrade Instructions 4190 Information Management System (IMS) Software Upgrade Instructions Introduction This publication describes the software upgrade procedure for the 4190 Information Management System (IMS). Inspecting

More information

Send the Ctrl-Alt-Delete key sequence to the Guest OS one of two ways: Key sequence: Ctlr-Alt-Ins Menu Sequence: VM / Guest / Send Ctrl-Alt-Delete

Send the Ctrl-Alt-Delete key sequence to the Guest OS one of two ways: Key sequence: Ctlr-Alt-Ins Menu Sequence: VM / Guest / Send Ctrl-Alt-Delete CIS 231 Windows 2008 Server Install Lab #1 (Virtual Machines) Keys to Remember when using the vsphere client. Send the Ctrl-Alt-Delete key sequence to the Guest OS one of two ways: Key sequence: Ctlr-Alt-Ins

More information

Supplementary Instructions for Windows NT 4.0. Contents

Supplementary Instructions for Windows NT 4.0. Contents Personal Computer Supplementary Instructions for Windows NT 4.0 CF-71 Series This manual contains supplementary instructions regarding the use of the computer. It explains the cases where the operation

More information

How to install the software of ZNS8022

How to install the software of ZNS8022 How to install the software of ZNS8022 1. Please connect ZNS8022 to your PC after finished assembly. 2. Insert Installation CD to your CD-ROM drive and initiate the auto-run program. The wizard will run

More information

IT Essentials v6.0 Windows 10 Software Labs

IT Essentials v6.0 Windows 10 Software Labs IT Essentials v6.0 Windows 10 Software Labs 5.2.1.7 Install Windows 10... 1 5.2.1.10 Check for Updates in Windows 10... 10 5.2.4.7 Create a Partition in Windows 10... 16 6.1.1.5 Task Manager in Windows

More information

Simplex 4190 TrueSite Workstation (TSW) Software Upgrade Instructions

Simplex 4190 TrueSite Workstation (TSW) Software Upgrade Instructions Simplex 4190 TrueSite Workstation (TSW) Software Upgrade Instructions Introduction This publication describes the software upgrade procedure for the Simplex 4190 TrueSite Workstation (TSW). Inspecting

More information

SVA NMP Monitor for Unicenter TNG on Windows NT/2000

SVA NMP Monitor for Unicenter TNG on Windows NT/2000 SVA NMP Monitor for Unicenter TNG on Windows NT/2000 Installation Guide Version 3.1.1 First Edition Proprietary Information Statement The information in this document is confidential and proprietary to

More information