GroupWise Messenger 2 Support Pack 3

Transcription

1 GroupWise Messenger 2 Support Pack 3 November 20, Overview The information in this Readme file pertains to Novell GroupWise Messenger 2 Support Pack 3. This Support Pack contains updates for all components contained in the Messenger 2 product. This Support Pack includes updates for the NetWare, Linux*, and Windows* Messenger 2 software. The NetWare and Windows software is provided in one set of downloads; the Linux software, including the Cross-Platform client for Linux and Macintosh*, is provided in a separate set of downloads. IMPORTANT: The GroupWise Messenger 2 Support Pack 2 clients and later are unable to connect to any GroupWise Messenger system that is older than GroupWise Messenger 2 Support Pack 1. 2 System Requirements The system requirements for GroupWise Messenger 2 Support Pack 3. are essentially the same as those listed in the Novell Messenger 2 Installation Guide ( nm2/nm2_install/data/a20gkue.html), with the following additional environments now supported: XEN virtualization on SUSE Linux Enterprise Server (SLES) 10 Heartbeat 2.0 clustering on SLES 10 Microsoft* Windows Vista for the GroupWise Messenger Windows client 3 NetWare/Windows: Support Pack Installation Section 3.1, NetWare/Windows: Server Installation Instructions, on page 1 Section 3.2, Windows: Client Software Installation Instructions, on page NetWare/Windows: Server Installation Instructions 1 Download the NetWare/Windows GroupWise Messenger 2 SP3 Administration compressed executable file (gwm203e.exe for English only or gwm203m.exe for multilingual) to a temporary directory on your NetWare or Windows server. 2 Extract the.exe file into a directory at the root of your local drive or to a network server drive that can handle long pathnames. The compressed file contains directory paths that could exceed DOS limits. 3 In Windows, click Start > Run > Browse, then locate the directory where you extracted the administration files. 4 Select the setup.exe file, then click OK to run the GroupWise Installation program. GroupWise Messenger 2 Support Pack 3 1

2 5 Click Install Server, then click Yes to accept the license agreement. 6 Select Create or Update a System, then click Next. 7 Follow the on-screen instructions provided in the Messenger Installation program to update the software. For additional instructions, refer to the Novell Messenger 2 Installation Guide on the GroupWise Messenger 2 Documentation Web site ( nm2). 3.2 Windows: Client Software Installation Instructions 1 In your Web browser, enter the IP address of the Novell Messenger Download page. This is the IP address and port of the Messaging Agent. By default, the Messaging Agent port is For example, if you installed to a server with an IP address of , the Novell Messenger Download page would be 2 Follow the on-screen instructions to download the client. 3 In Windows, click OK to run the Messenger Installation program. 4 Follow the on-screen instructions provided in the Messenger Installation program to install the software. 4 Linux: Support Pack Installation Section 4.1, Linux: Operating System Update, on page 2 Section 4.2, Linux: Server Installation Instructions, on page 7 Section 4.3, Linux Cross-Platform Client Software Installation Instructions, on page 8 Section 4.4, Macintosh Cross-Platform Client Software Installation Instructions, on page 8 Section 4.5, Compatibility with Other Instant Messaging Systems, on page Linux: Operating System Update If you are updating your version of Linux as well as updating Novell Messenger, perform the Linux operating system upgrade first. In addition, when you upgrade on a server where GroupWise Monitor is installed, you need to run a script that reconfigures the Monitor Application for the new Apache and Tomcat configuration and directory structure. Upgrading Open Enterprise Server 1 to Open Enterprise Server 2 on page 2 Upgrading SUSE Linux Enterprise Server 9 to SUSE Linux Enterprise Server 10 on page 4 Updating the Monitor Application after the Operating System Upgrade on page Upgrading Open Enterprise Server 1 to Open Enterprise Server 2 When you upgrade from Open Enterprise Server (OES) 1 to OES 2 with Novell Messenger installed on your OES server, you encounter package conflicts that must be resolved. A pop-up message appears immediately before the Installation Settings screen that informs you that the Delete Unmaintained Packages option is selected under Update Options. OES 2 considers Novell 2 GroupWise Messenger 2 Support Pack 2

3 Messenger an unmaintained package. This means that, by default, your Novell Messenger software will be deleted as part of the upgrade process, unless you follow the instructions below. 1 Read the pop-up warning carefully, then click OK to close the pop-up. The pop-up describes three possible actions you can take to resolve the Novell Messenger status as an unmaintained package. This procedure steps you through the second of the three possible actions. This alternative works most efficiently for preserving your Novell Messenger installation. 2 When ConsoleOne is installed on the server: The following message displays below the Packages link on the Installation Settings screen: Cannot solve all conflicts. Manual intervention is required. 2a Click the Packages link. The upgrade process checks for package conflicts, then displays the following message: NOVLc i386 is locked and cannot be uninstalled. 2b Select Keep NOVLc1, then click OK - Try Again. The upgrade process checks again for conflicts for NOVLc1 and displays one or more package-related warnings, providing you with alternatives for how to handle each conflict. The specific warnings you receive depend on the packages installed on the server you are upgrading. Therefore, warnings vary. Here are some examples: NOVLc i386 cannot be installed due to missing dependencies. novell-eguide noarch cannot be installed due to missing dependencies. The messages fall into two categories of problems: Missing dependencies for ConsoleOne (the NOVLc1 package) Missing dependencies for some other product package besides ConsoleOne (for example, eguide) The following steps help you decide which action to take for each type of message. 2c If the message indicates missing dependencies for ConsoleOne (NOVLc1), select Ignore This Requirement Just Here. 2d If the message indicates missing dependencies for some other product package besides ConsoleOne, and you are sure that you do not want that product package, select Delete package_name. WARNING: ConsoleOne is dependent on a variety of packages. Delete packages only when you are certain that they are not required by ConsoleOne. If in doubt, select Keep package_name. 2e When you have selected an action for each conflict message, click OK - Try Again. The upgrade process checks again for conflicts for NOVLc1. Additional messages might be displayed for you to select actions to resolve the conflicts. This cycle repeats until all conflicts have been resolved, then you successfully reach the Packages page. 3 On the Packages page, select Search in the Filter field. 4 Search for the Novell Messenger packages that are installed on the server by typing the following in the Search field: GroupWise Messenger 2 Support Pack 3 3

4 novell 5 Click Search. Depending on what Novell Messenger components are installed on the server, the search results include some of the following packages: novell-messenger-agents novell-messenger-software novell-groupwise-gwmon novell-groupwise-monitor 6 Right-click each of the Novell Messenger and GroupWise Monitor packages in the list, then click Keep. This changes the status of the Novell Messenger and GroupWise Monitor packages from Delete to Keep. 7 Search for the NOVLc1 package. The NOVLc1 and NOVLc1Linuxjre packages should be listed and marked as locked. This means that they will not be deleted. 8 If these packages are marked with a Delete status, change their status to Keep. 9 Click Accept on the Packages page. 10 If you are presented with a font License Agreement, click Accept. 11 Click Continue to return to the Install Settings page. 12 Verify that the package conflict message is now gone from under the Packages link, then continue with the upgrade process. 13 After you have finished the upgrade, reinstall the NDSbase RPM that was originally installed with ConsoleOne. The upgrade process removed it, but it is still needed by ConsoleOne. 13a In a Linux terminal window, log in as root, then change to the directory where you originally extracted the ConsoleOne files. 13b Change to the Linux subdirectory. 13c Use the following command to reinstall the NDSbase RPM: rpm -ivh NDSbase-version.i386.rpm If you encounter problems with Novell Messenger after you have upgraded from OES 1 to OES 2, see TID in the Novell Knowledgebase ( for assistance Upgrading SUSE Linux Enterprise Server 9 to SUSE Linux Enterprise Server 10 When you upgrade from SLES 9 to SLES 10 with Novell Messenger installed on your SLES server, you encounter package conflicts that must be resolved. 1 When ConsoleOne is installed on the server: The following message displays below the Packages link on the Installation Settings screen: Cannot solve all conflicts. Manual intervention is required. 1a Click the Packages link. The upgrade process checks for package conflicts, then displays the following message: NOVLc i386 is locked and cannot be uninstalled. 4 GroupWise Messenger 2 Support Pack 2

5 1b Select Keep NOVLc1, then click OK - Try Again. The upgrade process checks again for conflicts for NOVLc1 and displays one or more package-related warnings, providing you with alternatives for how to handle each conflict. The specific warnings you receive depend on the packages installed on the server you are upgrading. Therefore, warnings vary. Here are some examples: NOVLpkia i386 is locked and cannot be uninstalled. NOVLc i386 cannot be installed due to missing dependencies. The messages fall into two categories of problems: A locked package Missing dependencies for ConsoleOne (the NOVLc1 package) The following steps help you decide which action to take for each type of message. 1c If the message indicates a locked package, select Keep package_name. 1d If the message indicates missing dependencies for ConsoleOne (NOVLc1), select Ignore This Requirement Just Here. 1e When you have selected an action for each conflict message, click OK - Try Again. The upgrade process checks again for conflicts for NOVLc1. Additional messages are displayed for you to select actions to resolve the conflicts. This cycle repeats until all conflicts have been resolved (approximately nine times), then you successfully reach the Packages page. 2 On the Packages page, select Search in the Filter field. 3 Search for the Novell Messenger packages that are installed on the server by typing the following in the Search field: novell 4 Click Search. Depending on what Novell Messenger components are installed on the server, the search results include some of the following packages: novell-messenger-agents novell-messenger-software novell-groupwise-gwmon novell-groupwise-monitor 5 Right-click each of the first Novell Messenger and GroupWise Monitor packages in the list, then click Keep. This changes the status of the Novell Messenger and GroupWise Monitor packages from Delete to Keep. 6 Search for the NOVLc1 package. The NOVLc1 and NOVLc1Linuxjre packages should be listed and marked as locked. This means that they will not be deleted. 7 If these packages are marked with a Delete status, change their status to Keep. 8 Click Accept on the Packages page. 9 If you are presented with a font License Agreement, click Accept. 10 Click Continue to return to the Install Settings page. GroupWise Messenger 2 Support Pack 3 5

6 11 Verify that the package conflict message is now gone from under the Packages link, then continue with the upgrade process. 12 After you have finished the upgrade, reinstall the NICI RPM and the NDSbase RPM that were originally installed with ConsoleOne. The upgrade process removed them, but they are still needed by ConsoleOne. 12a In a Linux terminal window, log in as root, then change to the directory where you originally extracted the ConsoleOne files. 12b Change to the Linux subdirectory. 12c Use the following commands to reinstall the RPMs: rpm -ivh nici-version-i386 rpm -ivh NDSbase-version.i386.rpm 12d If the NOVLc1Linuxjre was not originally installed, install it using the following command: rpm -ivh NOVLc1Linuxjre-version.i386.rpm If you encounter problems with Novell Messenger after you have upgraded from SLES 9 to SLES 10, see TID in the Novell Knowledgebase ( for assistance Updating the Monitor Application after the Operating System Upgrade When you upgrade your Linux operating system, OES 2 installs new versions of Apache and Tomcat by default. SLES does not; you must install them manually by following the procedure in this section. In addition, the GroupWise 7 installations of the Monitor Application must be modified to accommodate changes made in Apache and Tomcat. The WebAccess/Monitor Update script takes care of this process for you. This script is available with TID in the Support Knowledgebase ( 1 If you have upgraded to SLES 10, use YaST to install Apache and Tomcat if they were not already installed on SLES 9: 1a Start YaST, then provide the root password. 1b Click Software Management. 1c In the Search field, type Apache, click Search, then select apache2 from the list. 1d In the Search field, type Tomcat, click Search, then select tomcat5 from the list. Apache 2 was part of your SLES 9 installation, so it should have been automatically upgraded. Tomcat changed from Tomcat 4 to Tomcat 5, so unless Tomcat 5 was installed on SLES 9, Tomcat 5 needs to be installed. 1e Click Accept. 1f Follow the prompts to install the needed packages to your SLES 10 server. 1g Exit YaST. 2 Download the WebAccess/Monitor Update script from TID in the Novell Support Knowledgebase ( to a convenient location on your Linux server. 3 Change to the directory where you downloaded the script file. 4 Give the script file execute permissions: chmod +x fixgwweb.sh 6 GroupWise Messenger 2 Support Pack 2

7 5 Run the script. The script makes some slight reconfigurations of Monitor files and directories that were originally set up when the Monitor Application was installed on your previous version of Linux. Apache 2: On OES 1 and SLES 9, Apache 2 used the mod_jk connector to facilitate communication between Apache and Tomcat. On OES 2 and SLES 10, Apache 2 uses the mod_proxy module instead. The WebAccess/Monitor Update script modifies the gw.conf file with this change. On SLES 10, the script also creates a symbolic link from /etc/opt/novell/gw/gw.conf to the new Apache 2 location of /etc/ apache2/conf.d/gw.conf. Tomcat 5: On OES 1 and SLES 9, the /var/opt/novell/gwmon directory now links to/var/opt/novell/tomcat5/webapps/gwmon. 6 Start or restart Tomcat. OES 2: SLES 10: /etc/init.d/novell-tomcat5 restart /etc/init.d/tomcat5 start 7 Start or restart Apache. OES 2: SLES 10: /etc/init.d/apache2 restart /etc/init.d/apache2 restart 8 If you are upgrading to OES 2: You might receive the following message when starting Apache 2: Module "Jk" is not installed, ignoring. You can safely ignore this message, but if you want to eliminate it: 8a Start YaST, then provide the root password. 8b Click NetWork Services > HTTP Server. 8c On the Server Modules tab, select the jk module in the list of services, then toggle the status to Off. 8d Click Finish to save your change. 8e Exit YaST. You should now be able to run Monitor successfully on your upgraded Linux operating system. 4.2 Linux: Server Installation Instructions 1 Download the GroupWise Messenger 2 SP3 Administration/Client compressed tar file to a temporary directory on your Linux server. The GroupWise Messenger administration/client RPMs include all languages, so there is no English-only download for Linux administration/client. 2 In a terminal window at your Linux server, change to the temporary directory, then use the following commands to uncompress and untar the downloaded file: tar -xz gwm203lnx.tgz GroupWise Messenger 2 Support Pack 3 7

8 The result is a directory named gwm203lnx. 3 Change to the gwm203lnx directory. 4 Become root by entering sux and the root password. 5 Use the following command to start the GroupWise Messenger Installation program:./install.sh 6 Follow the on-screen instructions to create or update your Messenger system. For additional instructions, refer to the Novell Messenger 2 Installation Guide on the GroupWise Messenger 2 Documentation Web site ( nm2). 4.3 Linux Cross-Platform Client Software Installation Instructions 1 In your Web browser, enter the IP address of the Novell Messenger Download page. This is the IP address and port of the Messaging Agent. By default, the Messaging Agent port is For example, if you installed to a server with an IP address of , the Novell Messenger Download page would be 2 Follow the on-screen instructions to download the client. 3 Change to the directory where you downloaded the file. 4 Enter the following command: sh./nvlmsgr.bin 5 To start the Cross-Platform client after installation, click the Messenger icon on your Linux desktop. 4.4 Macintosh Cross-Platform Client Software Installation Instructions 1 In your Web browser, enter the IP address of the Novell Messenger Download page. This is the IP address and port of the Messaging Agent. By default, the Messaging Agent port is For example, if you installed to a server with an IP address of , the Novell Messenger Download page would be 2 Follow the on-screen instructions to download the client. 3 To start the Cross-Platform client after installation, click the Messenger icon on your Macintosh desktop. 4.5 Compatibility with Other Instant Messaging Systems If you use Cerulean Trillian* Pro to communicate between instant messaging systems, a GroupWise Messenger plug-in is available at Cerulean Studios Web site ( downloads/): 8 GroupWise Messenger 2 Support Pack 2

9 The Pidgin (formerly Gaim) open source instant messaging connector is available at Pidgin Web site ( The Kopete open source instant messaging plug-in is available at the Kopete Web site ( kopete.kde.org/index.php). 5 Known Issues for Administration Section 5.1, Case-Sensitive Passwords Do Not Work With edirectory 8.8, on page 9 Section 5.2, Encrypted Messenger Attributes in edirectory 8.8, on page Case-Sensitive Passwords Do Not Work With edirectory 8.8 If you try to connect to edirectory TM 8.8 from GroupWise Messenger with a case-sensitive password, edirectory 8.8 might not recognize the case-sensitive password. For information on how to enable case-sensitive passwords in edirectory 8.8, see the How to Make Your Password Case- Sensitive in the edirectory 8.8 What s New Guide ( edir88new/data/brix9ry.html). 5.2 Encrypted Messenger Attributes in edirectory 8.8 If you are storing any encrypted GroupWise Messenger attributes in edirectory 8.8, you cannot see these attributes in ConsoleOne until they are unencrypted. 6 Known Issues for the Clients If you have Windows Vista installed and you have GroupWise Messenger 2 Support Pack 1 installed, the auto update functionality does not work correctly. Windows Vista is not supported until GroupWise Messenger 2 Support Pack 2 or later. If you have already installed GroupWise Messenger initial release or Support Pack 1 on a Windows Vista workstation, then you need to uninstall and reinstall GroupWise Messenger with the later Support Pack. 7 Defect Fixes Section 7.1, Windows Client Fixes, on page 9 Section 7.2, Agent Fixes, on page Windows Client Fixes Added a timeout to the AutoUpdate window to avoid dropped connections. Invalid entries in the Privacy Blocker list are automatically removed to avoid errors. 7.2 Agent Fixes The porxy user password can be obfuscated in the startup file for the agents. A new command line utility, gwmpwd, lets you change the obfuscated password. GroupWise Messenger 2 Support Pack 3 9

10 NOTE: This fix was included in the GroupWise Messenger HP1 update released in June Fixed an NetWare abend in the TCP handler. Fixed issue where adding a password to a chat room locked any administration of the chat room. 8 Documentation The following sources provide information about GroupWise Messenger 2, but they have not been updated for Support Pack 2 or later: Product documentation included with the software in the \server\docs\en directory: Quick Start (NovellMessengerQuickStart.pdf) Installation Guide (NovellMessengerInstallationGuide.pdf) Online product documentation: GroupWise Messenger 2 Documentation Web Site ( 9 Documentation Conventions In this documentation, a greater-than symbol (>) is used to separate actions within a step and items in a cross-reference path. A trademark symbol (, TM, etc.) denotes a Novell trademark; an asterisk (*) denotes a third-party trademark 10 Legal Notices Novell, Inc. makes no representations or warranties with respect to the contents or use of this documentation, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to revise this publication and to make changes to its content, at any time, without obligation to notify any person or entity of such revisions or changes. Further, Novell, Inc. makes no representations or warranties with respect to any software, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to make changes to any and all parts of Novell software, at any time, without any obligation to notify any person or entity of such changes. Any products or technical information provided under this Agreement may be subject to U.S. export controls and the trade laws of other countries. You agree to comply with all export control regulations and to obtain any required licenses or classification to export, re-export or import deliverables. You agree not to export or re-export to entities on the current U.S. export exclusion lists or to any embargoed or terrorist countries as specified in the U.S. export laws. You agree to not use deliverables for prohibited nuclear, missile, or chemical biological weaponry end uses. See the Novell International Trade Services Web page ( for more information on exporting Novell software. Novell assumes no responsibility for your failure to obtain any necessary export approvals. Copyright 2007 Novell, Inc. All rights reserved. Permission is granted to copy, distribute, and/or modify this document under the terms of the GNU Free Documentation License (GFDL), Version 10 GroupWise Messenger 2 Support Pack 2

11 1.2 or any later version, published by the Free Software Foundation with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the GFDL can be found at Novell, Inc. has intellectual property rights relating to technology embodied in the product that is described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the U.S. patents listed on the Novell Legal Patents Web page ( and one or more additional patents or pending patent applications in the U.S. and in other countries. For Novell trademarks, see the Novell Trademark and Service Mark list ( company/legal/trademarks/tmlist.html). All third-party trademarks are the property of their respective owners. GroupWise Messenger 2 Support Pack 3 11