USER'S INFORMATION MANUAL

Transcription

1 USER'S INFORMATION MANUAL NFC 280 NFC Capable Android Devices TABLE OF CONTENTS CONTACT INFORMATION. 1 Icon Definitions Page titles.. 3 Home Page 4 Read Device... 5 Settings. 6 Installer and Homeowner 7 Fault History Settings...8 Advanced and Equipment Status Settings... 9 Program schedule settings 10 Date and Time Settings. 11 Dealer Information Write to Device Share Configuration Copy, Rename, Share, and Delete Configuration.15 Copy Configuration...16 Rename Configuration...17 Delete Configuration...18 CONTACT INFORMATION Go to the website at then click on Contact us and follow the instructions. Contact us by mail: Johnson Controls Unitary Products Consumer Relations 5005 York Drive Norman, OK The manufacturer recommends that the user read this manual and keep the manual for future reference.

2 Icon Definitions + New Configuration Save updated settings Save: New Configuration(s) also for reading Device Information Reset: reset any changes made Options On Off Menu 2

3 Page Titles Home Page Configuration Page Installer Settings Page 3

4 Home Page Read device Help About Menu Icon displays 3 options: 1. Read device: Read information from the thermostat to device. 2. Help: Setting up NFC Create a New Configuration Saving Configurations Copy, Rename, and Delete Restore Defaults Reading from a Thermostat Writing to a Thermostat Uninstalling NFC 3. About: Application Version and Privacy Policy New Configuration Icon 4

5 Read Device Read device Step 1 - Select the Menu Icon and select Read Device. Help About The Untitled Config window will open with a notification displaying a successful reading. Step 2 - Select Save Icon to keep the configuration. Step 3 Rename and Save the new Configuration. Saved Configurations will be displayed on the Home Page 5

6 Settings Select a Setting(s) option to view or change. Write to device Share configuration Restore defaults Select the Menu Icon to: Write to device Share configuration Restore defaults The Reset Icon will display after an option has been updated. By selecting the Rest Icon it will restore Defaults. Warning: The User CANNOT reset the Settings after they have been saved! 6

7 Installer and Homeowner Settings Installer Settings: Allows the User to modify equipment information. Homeowner Settings: Shows information that is set by the homeowner (modes, setpoints, humidity, etc.). The User can also modify the information. 7

8 Fault History Settings Fault History Settings: (view only) shows Fault Codes, Time(s) and Date(s) of the fault occurrence(s) from the thermostat. Displayed Faults. No Faults displayed. 8

9 Advanced and Equipment Status Settings Advanced Settings: The Homeowner has access to the Settings under the Homeowner side of the Thermostat. The Installer needs to notify the Homeowner if any changes are made on this screen after installation. Equipment Status: (View only) allows user to see the system Air Filter and Serial Number of the Thermostat. 9

10 Program Schedule Settings Program Schedule: has a 2 Day Part Program and a 4 Day Part Program. The Screen will display each day s Cool Setpoint, Heat Setpoint and the associated Time for each Day Part. Select Menu Icon to access: Number of day parts: 2 or 4 day parts Copy day Restore defaults Save Select Temperature Value to modify Temperature setpoint. Select Time to modify the chosen day part 10

11 Date and Time Settings (View only) Date Settings: Displays Day, Month, and Year after the device reads the Thermostat. Time Settings: Displays Time after the device reads the Thermostat, along with associated Time Settings. 11

12 Dealer Information Dealer Information Settings: Provides the Homeowner with contact information for their local dealer. 12

13 Write to Device Write to device Share configuration Restore defaults Step 1 - On the Configuration Page, select the Menu Icon then select Write to Device. Step 2 - Select all of the options that are to be written to the device and select Write. Step 3 - After the Settings or Groups have been selected, select Write and place the Android device on the Thermostat box near the NFC HERE image, or in front of the Thermostat if it has been removed from the box. Wait for a successful notification display. Note: The Android device NFC chip and Thermostat chip must be placed next to each other in order to write successfully. If the NFC fails, attempt the process again. 13

14 Share Configuration Share Configuration: Allows the User to stored Configurations. Write to device Share configuration Restore defaults Step 1 - On the Configuration Page, select the Menu Icon then select Share Configuration. Step 2 the selected Configuration. 14

15 Copy, Rename, Share and Delete Configuration(s) Step 1 - On the Home Screen select and hold the desired Configuration until the pop up window appears. Step 2 Select desired action. 15

16 Copy Configuration(s) Step 1 - On the Home Screen select and hold the Configuration to be Copied until the pop up window appears. Step 2 Select Copy Configuration. Step 3 Rename the Copied Configuration and select Copy. Validate the Copied Configuration on the Home Screen. 16

17 Rename Configuration Step 1 - On the Home Screen select and hold the Configuration to be Renamed until the pop up window appears. Step 2 Select Rename Configuration. Step 3 Rename the Configuration and select Rename. Validate the Renamed Configuration on the Home Screen. 17

18 Delete Configuration Step 1 - On the Home Screen select and hold the Configuration to be Deleted until the pop up window appears. Step 2 Select Delete Configuration. Validate that the Configuration has been Deleted on the Home Screen. Subject to change without notice. Published in U.S.A. Copyright 2016 by Johnson Controls, Inc. All rights reserved. York International Corp York Drive Norman, OK Supersedes: UUM-B-0616