- PDF Free Download

Size: px

Start display at page:

Download ""

David O’Neal’
5 years ago
Views:

2 Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control. Oki Data also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by Oki Data by Oki Data Americas, Inc. All rights reserved. Written and produced by the Oki Data Training & Publications Department. Please address any comments on this publication to: Training & Publications Dept. Oki Data Americas, Inc Bishops Gate Blvd. Mt. Laurel, NJ For the latest product information, printer drivers, manuals, special offers, etc., go to OKI is a registered trademark/marque déposée/marca registrada Oki Electric Industry Company, Ltd. Macintosh is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and other countries.

3 Overview Your Model C5400 Upgrade Kit provides a Postscript emulation driver for Macintosh and Windows systems, in addition to the PCL driver for Windows systems. It also activates the Ethernet port so you can use your printer on a network. Installing the kit involves four steps: Step 1: Uninstall the C5400 PCL Printer Driver (Windows only).. p. 2 Step 2: Install the New DIMM in the Printer p. 3 Step 3: Make the Network Connection, if applicable p. 11 Step 4: Configure the Network and/or Install Printer Driver(s)... p. 12 Caution! To avoid damage by static electricity or rough handling, keep the DIMM board in its packaging until you're ready to install it. Note: You will need a Phillips bit screwdriver to install the kit. 1

4 Step 1: Uninstall the C5400 PCL Driver Windows Operating Systems Only Windows XP and Click Start Settings Printers [Printers and Faxes for XP]. 2. Click the C5400 PCL driver, then click File Delete. 3. Click Yes to confirm the deletion. 4. Click File Server Properties. 5. On the Drivers tab, select the C5400 PCL printer driver and click Remove. 6. Click Yes to confirm the deletion, then click Close. 7. Close the dialog box. 8. Restart your computer. Windows Me, 98, 95B, NT Click Start Settings Printers. 2. Click the C5400 PCL driver, then click File Delete. 3. Click Yes to confirm the deletion 4. Close the Printers dialog box. 5. Restart your computer. 2

Note that C5400 shows at the top of the MenuMap. 2.

5 Step 2: Install the New DIMM 1. Use the control panel to print out the MenuMap: a. Press + one or more times until INFORMATION MENU appears. b. Press ENTER twice and wait for the 2-page MenuMap to print. c. Note that C5400 shows at the top of the MenuMap. 2. Prepare the printer: Turn off the printer (1). Unplug the power cord (2). Detach the interface cable (3) a = USB, b = parallel. 3. Open the top cover. 3

6 4. Open the front cover. 5. Loosen the thumbscrew holding the printer side cover in place. 6. Lift up on the ends and remove the side panel from the printer. 4

7 7. Locate the DIMM to be replaced. 8. Push out the lock tabs at either end of the DIMM and remove it. Caution! To avoid damage, ground yourself (touch metal) before handling DIMMs. 9. Remove the new DIMM from its shipping package. 5

8 10. Hold the DIMM with the narrower metallic contact edge (1) to the right, and insert it straight into the socket, pushing in until you hear the lock tabs on either side snap into place. Caution! Keep the DIMM at a 90 angle to the printer: Push the DIMM in straight: 6

9 11. Replace the side panel on the printer and secure it in place with the thumbscrew. 12. Close the front cover. 13. Close the top cover. 7

14. Loosen the screw and remove the cover

connection rather than the newly available

interface cable USB (a) or parallel (b).

10 14. Loosen the screw and remove the cover (1) from the Ethernet port on the back of the printer. 15. If you will be using the same computer connection rather than the newly available Ethernet connection, reattach the computer interface cable USB (a) or parallel (b). Otherwise, skip this step. Note: Making the Ethernet connection is covered on p

11 16. Plug in the power cord, 17. Press and hold the TEST button (1) on the back of the printer while turning on the printer. Hold the button until the message NETWORK INITIAL WAIT A MOMENT appears on the display. This initializes the Ethernet port. 9

12 18. Generate a MenuMap to check for proper installation: BACK ENTER ON LINE MENU CANCEL a. Press + one or more times until INFORMATION MENU appears. b. Press ENTER twice and wait for the MenuMap to print. c. You should see; C5400n at the top of the MenuMap four additional pages entitled Network Information. d. If the MenuMap printout has not changed, open up the printer and reinstall the DIMM, making sure it is firmly in place, then print the MenuMap again. 10

Turn the printer off. 2. If there is a plastic plug (1) in the Ethernet port, remove it. 3.

13 Step 3: Make the Network Connection If you are using the USB or parallel port, skip this step. Note: No Ethernet cable is supplied. Use an Ethernet cable with two twisted wire pairs and an RJ45 plug. 1. Turn the printer off. 2. If there is a plastic plug (1) in the Ethernet port, remove it. 3. Connect your Ethernet cable to the port. 4. Connect the other end of the cable to the network port. 5. Turn on the printer and wait for it to initialize. 11

14 Step 4: Configure the Network and/or Install the C5400n Driver(s) Windows Operating Systems: PCL and Postscript Emulation Printer Drivers Networks TCP/IP, see page 3, ff., in the Computer Connections & Software Install Guide supplied with this kit. Novell, see page 8, ff., in the Computer Connections & Software Install Guide supplied with this kit. USB Port Windows XP, see page 11 in the Computer Connections & Software Install Guide supplied with this kit. Windows 2000, see page 12 in the Computer Connections & Software Install Guide supplied with this kit. Windows Me, see page 13 in the Computer Connections & Software Install Guide supplied with this kit. Windows 98, see page 14 in the Computer Connections & Software Install Guide supplied with this kit. Parallel Port See page 16 in the Computer Connections & Software Install Guide supplied with this kit. Macintosh Systems: Postscript Emulation Printer Driver OS 9.1+, see page 20 in the Computer Connections & Software Install Guide supplied with this kit. OS 10.1 and higher, see page 22 in the Computer Connections & Software Install Guide supplied with this kit. 12

16 Oki Data Americas, Inc Bishops Gate Blvd. Mt. Laurel, NJ Phone: (800) FAX: (856)

Hard Disk Drive (HDD) Installation Instructions

Hard Disk Drive (HDD) Installation Instructions 59375102 2007 by Oki Data Americas, Inc. All rights reserved. Every effort has been made to ensure that the information in this document is complete, accurate,