KEMP360 Central - VMware vsphere. KEMP360 Central using VMware vsphere. Installation Guide

Size: px

Start display at page:

Download "KEMP360 Central - VMware vsphere. KEMP360 Central using VMware vsphere. Installation Guide"

Lenard Mills
6 years ago
Views:

1 KEMP360 Central using VMware vsphere Installation Guide VERSION: 5.0 UPDATED: JUNE 2016

2 Table of Contents 1 Introduction Document Purpose Intended Audience... 3 Prerequisites Installing KEMP360 Central using vsphere... 4 Download the OVF File... 4 Deploy the OVF File... 4 Check the Network Adapter Settings Power on the KEMP360 Central Instance Initial Configuration of KEMP360 Central Manually Set the Network Settings References Document History Copyright KEMP Technologies, Inc. All Rights Reserved. 2

3 Introduction 1 Introduction KEMP360 Central is a centralized management, orchestration, and monitoring application that enables the administration of deployed LoadMaster instances. Use KEMP360 Central to perform administrative tasks on each LoadMaster instance. This provides ease of administration because multiple LoadMasters can be administered in one place, rather than accessing each LoadMaster individually. 1.1 Document Purpose The purpose of this document is to provide step-by-step instructions on deploying KEMP360 Central with VMware vsphere. 1.2 Intended Audience This document is intended for anyone who needs more information about deploying KEMP360 Central with VMware vsphere. Prerequisites The VMware virtual machine guest environment for the KEMP360 Central instance, at minimum, must include: 2 x virtual CPUs (reserve 2 GHz) 4 GB RAM 40 GB disk space There may be maximum configuration limits imposed by VMware such as maximum RAM per VM, Virtual NICs per VM etc. For further details regarding the configuration limits imposed by VMware, please refer to the relevant VMware documentation. Copyright KEMP Technologies, Inc. All Rights Reserved. 3

Installing KEMP360 Central using vsphere 2 Installing KEMP360 Central using vsphere The following instructions describe how to install KEMP360 Central using the VMware vsphere client.

4 Installing KEMP360 Central using vsphere 2 Installing KEMP360 Central using vsphere The following instructions describe how to install KEMP360 Central using the VMware vsphere client. Download the OVF File The KEMP360 Central.ovf file is currently unavailable on the KEMP Technologies website. KEMP360 Central is packaged with an.ovf file for ease of deployment. This file can be freely downloaded from KEMP Technologies and by default offers a permanent two device licence. To download the OVF file please follow the following instructions: 1. Visit the download page at 2. Select your country from the drop down list. 3. Select your hypervisor platform. 4. Click Download to start the download. 5. Checksums are provided to allow integrity checking of the download. 6. If necessary, unzip the download to an accessible location. Deploy the OVF File To deploy the KEMP360 Central instance initiate a Deploy OVF Template wizard which gathers all the information required to correctly deploy the KEMP360 Central instance. 1. Open the VMware vsphere client. 2. Select the correct Resource Pool within which you wish to install the KEMP360 Central instance. 3. Select the File > Deploy OVF Template menu option, this initiates the Deploy OVF Template wizard. Figure 2-1: Source Copyright KEMP Technologies, Inc. All Rights Reserved. 4

Installing KEMP360 Central using vsphere 4. Within the Source screen, click the Browse button and select the downloaded file. 5. Click the Next button. Figure 2-2: OVF Template Details 6.

5 Installing KEMP360 Central using vsphere 4. Within the Source screen, click the Browse button and select the downloaded file. 5. Click the Next button. Figure 2-2: OVF Template Details 6. Within the OVF Template Details screen, ensure that all the details regarding the KEMP360 Central instance are correct. 7. Click the Next button. The estimated disk usage is approximately 40GB. Copyright KEMP Technologies, Inc. All Rights Reserved. 5

6 Installing KEMP360 Central using vsphere Figure 2-3: Name and Location 8. In the Name and Location screen, enter a name for the KEMP360 Central instance into the Name field. The name can be up to 80 characters long. It should be unique within the virtual machine folder. Names are case sensitive. 9. If required, select the folder location within the inventory where KEMP360 Central will reside. 10. Click the Next button. 11. Within the Resource Pool screen, select the resource pool where KEMP360 Central will run. This page only displays if the cluster contains a resource pool and if you have not selected a resource pool within the inventory tree before initiating the deployment wizard. 12. Click the Next button. Copyright KEMP Technologies, Inc. All Rights Reserved. 6

Installing KEMP360 Central using vsphere Figure 2-4: Storage 13. Within the Storage screen, select the datastore in which you wish to store the VLM.

7 Installing KEMP360 Central using vsphere Figure 2-4: Storage 13. Within the Storage screen, select the datastore in which you wish to store the VLM. You may only select from preconfigured datastores within this screen. 14. Click the Next button. Copyright KEMP Technologies, Inc. All Rights Reserved. 7

8 Installing KEMP360 Central using vsphere Figure 2-5: Disk Format 15. Within the Disk Format screen, select whether you wish to use Thick Provision Lazy Zeroed, Thick Provision Eager Zeroed or Thin Provision. 16. Click the Next button. KEMP recommends using the Thin Provision option. Copyright KEMP Technologies, Inc. All Rights Reserved. 8

Installing KEMP360 Central using vsphere Figure 2-6: Network Mapping 17. Within the Network Mapping screen, select which networks in the inventory should be used for KEMP360 Central. 18.

9 Installing KEMP360 Central using vsphere Figure 2-6: Network Mapping 17. Within the Network Mapping screen, select which networks in the inventory should be used for KEMP360 Central. 18. Select the network mapping for Network and Farm by choosing the relevant preconfigured network from the Destination Network drop-down list. 19. Click the Next button. Copyright KEMP Technologies, Inc. All Rights Reserved. 9

Installing KEMP360 Central using vsphere Figure 2-7: Ready to Complete 20. Within the Ready to Complete screen, ensure that all the details are correct. 21. Click the Finish button.

Check the Network Adapter Settings Before starting KEMP360 Central first verify the network adapters are configured correctly. 1.

10 Installing KEMP360 Central using vsphere Figure 2-7: Ready to Complete 20. Within the Ready to Complete screen, ensure that all the details are correct. 21. Click the Finish button. Figure 2-8: Successfully Completed Once the Finish button is clicked, the KEMP360 Central machine is deployed. Check the Network Adapter Settings Before starting KEMP360 Central first verify the network adapters are configured correctly. 1. Select the deployed KEMP360 Central instance within the inventory tree. 2. Select the Inventory > Virtual Machine > Edit Settings menu option. 3. Select Network adapter from the Hardware tree. 4. Ensure the network adapters are configured correctly as follows: a. Ensure the Connect at power on checkbox is selected. b. Ensure the Adapter Type is correct. Copyright KEMP Technologies, Inc. All Rights Reserved. 10

Installing KEMP360 Central using vsphere The default, recommended adapter type is E1000. KEMP also supports the vmxnet3 driver. Both E1000 and vmxnet3 support Jumbo frames. c.

11 Installing KEMP360 Central using vsphere The default, recommended adapter type is E1000. KEMP also supports the vmxnet3 driver. Both E1000 and vmxnet3 support Jumbo frames. c. Ensure that the Automatic option is selected within the MAC Address section. d. Ensure that the correct Network Label is selected. Figure 2-9: Edit Settings If the network adapters are not configured correctly or if they have not been set up you can add a new network adapter by clicking the Add button. Power on the KEMP360 Central Instance To power on the KEMP360 Central instance, follow the steps below: 1. In the left panel of the client, select the KEMP360 Central instance. Copyright KEMP Technologies, Inc. All Rights Reserved. 11

When the KEMP360 Central instance finishes booting, a screen similar to the one above appears showing the IP address.

12 Installing KEMP360 Central using vsphere Figure 2-10: Power On 2. Click the Power on the virtual machine link. 3. Select the Console tab and wait for the instance to finish booting. Figure 2-11: IP address 4. When the KEMP360 Central instance finishes booting, a screen similar to the one above appears showing the IP address. Take note of this as you will need it to access the KEMP360 Central User Interface (UI). 5. If KEMP360 Central does not obtain an IP address, or if the IP address needs to be changed, it can be manually configured in the console by following the steps in Section 4. Copyright KEMP Technologies, Inc. All Rights Reserved. 12

Initial Configuration of KEMP360 Central 3 Initial Configuration of KEMP360 Central Now that it is deployed, KEMP360 Central needs to be configured.

13 Initial Configuration of KEMP360 Central 3 Initial Configuration of KEMP360 Central Now that it is deployed, KEMP360 Central needs to be configured. Follow the steps below to complete the initial configuration of KEMP360 Central: 1. Access the KEMP360 Central UI by opening a web browser and entering the IP address of the KEMP360 Central instance in the address bar. 2. Click Continue. Figure 3-1: Welcome Page Figure 3-2: Accept the License Agreement 3. The End User License Agreement (EULA) will be displayed. Click Agree to accept the EULA and continue. Copyright KEMP Technologies, Inc. All Rights Reserved. 13

Initial Configuration of KEMP360 Central Figure 3-3: Enter credentials An Order ID is supplied by KEMP when you purchase a KEM360 Central instance.

14 Initial Configuration of KEMP360 Central Figure 3-3: Enter credentials An Order ID is supplied by KEMP when you purchase a KEM360 Central instance. Entering an Order ID is optional for standard licenses. 4. Enter your KEMP ID (the address used when registering the KEMP account). Users need a KEMP ID to license KEMP360 Central. If you do not have a KEMP ID, click the link provided and register one. For step-by-step instructions on how to register for a KEMP ID, and for information on licensing in general, refer to the Licensing, Feature Description 5. Enter your Password. 6. Click License Now. Copyright KEMP Technologies, Inc. All Rights Reserved. 14

Initial Configuration of KEMP360 Central Figure 3-4: Set Admin Password 7. Enter a new admin password in the two text boxes provided and click Set Password.

15 Initial Configuration of KEMP360 Central Figure 3-4: Set Admin Password 7. Enter a new admin password in the two text boxes provided and click Set Password. The bar in the middle represents the strength of the password. The fuller the bar is - the more secure the password is. The initial configuration of KEMP360 Central is now complete. For further information, including instructions on how to add a network and LoadMaster to KEMP360 Central, refer to the KEMP360 Central, Feature Description Copyright KEMP Technologies, Inc. All Rights Reserved. 15

Manually Set the Network Settings 4 Manually Set the Network Settings This section shows you how to manually configure the KEMP360 Central network settings, without using DHCP.

16 Manually Set the Network Settings 4 Manually Set the Network Settings This section shows you how to manually configure the KEMP360 Central network settings, without using DHCP. Quick setup automatically begins when you log into KEMP360 Central for the first time. It can also be started by selecting option one from the main menu. Quick setup allows the network settings for KEMP360 Central to be quickly configured. Once KEMP360 Central is configured and running, all other parameters can be changed using the User Interface (UI). Quick Setup welcomes you with the following message: Figure 4-1: Quick Setup Help Message The Quick Setup procedure allows the configuration of the following parameters: 1. IP address of KEMP360 Central 2. Default Gateway 3. IP address or addresses of any associated name servers After these parameters have been set, the configuration should be activated. KEMP360 Central is then ready for use. If a parameter has been incorrectly set. Use the Cancel button until the main menu appears. Quick Setup can then be performed again to correct the error. To quickly set up your KEMP360 Central, use the following steps: 1. Log in to the console. Copyright KEMP Technologies, Inc. All Rights Reserved. 16

Manually Set the Network Settings Figure 4-2: Console Initial Configuration Screen 2.

From the Quick Setup Help dialog box, press OK. 4.

Enter the IP address and Classless Inter-Domain Routing (CIDR) you wish to assign to KEMP360

17 Manually Set the Network Settings Figure 4-2: Console Initial Configuration Screen 2. From the menu which displays, select Quick Setup and then press OK. 3. From the Quick Setup Help dialog box, press OK. 4. On the DHCP dialog box, select No to not use DHCP. Figure 4-3: IP Address Screen 5. Enter the IP address and Classless Inter-Domain Routing (CIDR) you wish to assign to KEMP360 Central and press OK. Figure 4-4: Default Gateway 6. Enter the IP address of the default gateway and press OK. Copyright KEMP Technologies, Inc. All Rights Reserved. 17

Manually Set the Network Settings Figure 4-5: Name Server IP Addresses Screen 7. Enter a, space-separated, list of name server IP addresses and press OK. Figure 4-2: Reboot 8.

18 Manually Set the Network Settings Figure 4-5: Name Server IP Addresses Screen 7. Enter a, space-separated, list of name server IP addresses and press OK. Figure 4-2: Reboot 8. Press Yes on the Reboot screen, to activate the setup. More information on Console Administration for KEMP360 Central can be found in the KEMP360 Central Console Administration, Interface Description. Copyright KEMP Technologies, Inc. All Rights Reserved. 18

19 References References Unless otherwise specified, the below documents can be found at Licensing, Feature Description KEMP360 Central, Feature Description KEMP360 Central Console Administration, Interface Description Copyright KEMP Technologies, Inc. All Rights Reserved. 19

20 Document History Document History Date Change Reason for Change Ver Resp Jan 2016 Initial Release First draft of document 1.0 KG Mar 2016 Release updates Updated for V KG Apr 2016 Release updates Updated for V KG May 2016 Release updates Updated for release V KG June 2016 Minor updates Enhancements made 5.0 LB Copyright KEMP Technologies, Inc. All Rights Reserved. 20

Microsoft Hyper-V 2012

KEMP360 Central with Microsoft Hyper-V 2012 Installation Guide VERSION: 5.0 UPDATED: JUNE 2016 Table of Contents 1 Introduction... 3 1.1 Document Purpose... 3 1.2 Intended Audience... 3 1.3 Prerequisites...