FAG CREASY Release Notes

Transcription

1 FAG CREASY Release Notes CREASY CREASY not yet released...4 CREASY not yet released...4 CREASY not yet released...4 CREASY not yet released...4 CREASY released CREASY not yet released...5 CREASY not released...5 CREASY not released...5 CREASY not released...6 CREASY released CREASY released CREASY CREASY CREASY Functions...6 Main...6 Box Editor...6 Server...6 Camera...7 CREASY CREASY CREASY CREASY Main Screen References...7 CREASY Reports...7 CREASY Embossing...7 Crease measurement range CREASY CREASY Box Editor...8 References...8 Setup Installer CREASY Installer Calibration CREASY CREASY Release Notes.doc 1 / 18 9/24/2015

2 CREASY CREASY Standards...9 Statistics...9 CREASY CREASY v CREASY v Standards Job Quality Reports...10 Job Statistics...10 CREASY v CREASY v Reports...10 CREASY v Reports...11 Standards...11 Power CREASE function...11 CREASY v Bead and Crease calculation Box Editor Standards...11 CREASY v Verify Setup Process...12 Main...12 CREASY v Cardboard Embossing...12 CREASY v Round Corner Creasing...12 Cardboard Embossing...12 CREASY v Main Logos...12 Reference Window...12 CREASY v Main Logos...12 Reference Window...13 Box Editor CREASY v CREASY Release Notes.doc 2 / 18 9/24/2015

3 ...13 Main...13 CREASY v New Job CREASY v About Window...13 References Definition Window...13 Verify Window...13 CREASY v References Definition Window...14 About Window...14 CREASY v Box Editor...14 References Definition Window...14 Reports...14 Statistics...14 CREASY Server...14 CREASY v References Definition Window...14 Box Definition Editor (premium version only) Reports Calibration...15 Verify...15 CREASY v Box Definition Editor (premium version only)...15 Reference definitions Reports...15 Math...15 CREASY v Calibration...15 CREASY v Display Reference definitions...16 Box Definition Editor (premium version only)...16 JOB Statistics...16 Math s improvement...16 Customer CREASY Verification...16 Calibration report...16 CREASY Premium Upgrade...17 HOST Connection...17 CREASY v CREASY v CREASY v CREASY Release Notes.doc 3 / 18 9/24/2015

4 CREASY v CREASY Reference database : save path for description corrected (if different from home in settings) References : some inconsistencies in displaying box blanc resolved Bead button can be disabled Word wrap for Box name in main screen EGUIDE o Cross section depth description limited to depth > 0.020mm o Scan Parameter Display at x=1280, y=200 fixed CREASY not yet released EGUIDE PRO o Compensate non flat surface by using the profile of the image in home position. This requires that there is no embossing in home position. This will lead to slightly higher measurement values in depth measurement (2 microns typically) as the lower level of the surface at the top and bottom end does not have any impact to the measurement result any more. o Reduce Dust impact and Ghost lines in 3D gray scale Image o Button on main screen next to scanning distance to open directly the EGUIDE page o Scanning Distance default value in References set to 10mm rather than 0mm o Add REF or Ad-Hoc info into Scanning parameters Window during scanning progress o Remove scanning distance input field from window as the scanning distance is set in the main window or retrieved from the reference o Display >Xmicrons % value CREASY not yet released Bead Report showing Graph in PDF again Use the distance if REF< is used in Standards Window. CREASY not yet released Missing SCANRES file on first installation when creating the BEAD Job Report for the first time. EGUIDE PRO Reference Rename Average Embossing to >REF in case of EGUIDE and EGUIDE PRO EGUIDE PRO Reference / in Tolerance on Job Statistic corrected (red highlighted text in case of out of tolerance) CREASY not yet released Job Active -> can only be accessed after closing Job. Icon on top of Preview Icon will hide and view the bottom information panel to display the analyses results in a larger window. EGUIDE PRO o Auto adjust number of captured images in case the scanning speed is to slow to move. o Select if the Surface Reference level is left/right or top/bottom. o Height/Depth Selector on EGUIDE Page in replaced by Icons o Film Thickness =180 by Default o Selector if Film is used or not EGUIDE PRO Reference o Measure References directly [REF]< Icon for EGUIDE PRO o Height/Depth selector in Reference Library o Surface Reference selector in Reference Library o Auto set Height/Depth value using reference*1.3 if job reference is selected CREASY Release Notes.doc 4 / 18 9/24/2015

5 o Multi Brightness image capture setting off for EGUIDE measurements EGUIDE PRO main Page o Progress bar shows scanning conditions o After a scan the scanning conditions are displayed next to the 3D Image o Interrupt Scanning by clicking the red icon of the progress bar window o Cross section display horizontally with adjusted ruler lines o Multi Brightness image capture setting off for EGUIDE measurements CREASY released Feedback minor errors from field test corrected and released. Reference Window : pre-select current Reference if any and inconsistency correction EGUIDE-PRO o Scan Distance on Setup Page o Display in Tolerance % on Setup Page and Setup Statistics : o select if File path should appear on reports o EGUIDE PRO numbers in micrometer o Select if read colored area should be displayed to show the deep areas o Embossing Report with Image CREASY not yet released Scoring is a separate function tool and enabled with Power Box. Scoring Depth Algorithm adapted: o Shorter edge instead of average edge length o Real angle of edge instead of 45 angle o Real peak of edge instead of assumed peak. Embossing Report: + / - Tol header Hints in function buttons on main screen for all functions Remove Statistic reading in SetupJob recalculation of Statistic values corrected. Display Box Image only if a Reference is selected. Remove up to 3 recent readings from Setup Statistic Reference Database Crease References: highlight Crease Name if REF Button is active Draw Historical Measurement in Angle & Scoring Result Window (red line) Scoring Reference database in Box Blank Page of References (separate Page beside Bead&Crease) EGUIDE PRO Function o Save&Load Scan Images o Highlight Measurement area o Calculate % of area deeper than the reference EGUIDE on separate page CREASY not released Embossing References with asymmetric tolerances. SLOPE calibration function in Verify Window. CREASY not released Reference ABCDEFG naming corrected for Embossing in Reference database Window File name of Reference database displayed in Reference database Window corrected for Embossing Portuguese Language Statistics Report redesigned CREASY Release Notes.doc 5 / 18 9/24/2015

6 CREASY not released Upgrade codes are saved in both INI files sn_creasy.ini and CREASY.INI. AUTO jump to next Reference in Job mode did stop at F and did not jump to G corrected. AUTO jump can be switched ON/OFF in setting also for E-GUIDE measurements E-GUIDE Job Measurements can use the same reference set (A B) for multiple locations Save All Data to text file function in Setup Process and Job adapted for E-GUIDE measurements CREASY released Error in Embossing Box Blanc loading corrected (sometimes picks standard box blanc image) <File name with Job name> check box re-positioned in /reports as it is not for E-GUIDE only CREASY released E-GUIDE Report: remove Average Embossing references if switched off. CREASY Updated manuals Bead between two embossing line can be measured as well. CREASY Stay in E-GUIDE mode after displaying a Report E-GUIDE Max-D increased range to 50 (/Additional) E-GUIDE function Average Embossing can be disabled (/Reports) E-GUIDE Setup Report File name can have Job name included (/Reports) E-GUIDE Setup Report can contain or not contain images (Setup/Reports) E-GUIDE Job Report Average Embossing can be disabled (/Reports) E-GUIDE Job Report: copy values from table to report correctly E-GUIDE Job Statistic click on graph expands file name such as.\ can be accepted as default report file path. CREASY Functions E-GUIDE function Power Box function incl. Scoring Power Crease: if Narrow Opening is selected in the settings window, than the angles of the Narrow Opening crease are displayed in green. Full Screen Display with F8 key Main Measurement position of a group displayed as index during job measurement Improved folding point detection in Bead measurement (wide bead vs. small bead) Box Editor Measurement positon with index Server CREASY Server now does support all Reference Types. References and Box definitions are inserted using the main application. CREASY Release Notes.doc 6 / 18 9/24/2015

7 Camera New Frame Rate 15fps default for new Camera HW required 100% backward compatible CREASY Cerulean Brand English Manual Cerulean Brand About Window CREASY wide bead and wide crease measurement <0.4mm limitation corrected for mil and inch Cerulean label CREASY Save row data in Job statistics corrected (double conversion Inch/mm ) CREASY Main Screen Add Statistic Icon changes if adding mode is on AUTO Select brightness icon? Save Statistics Checkbox added to the reports page. If checked the statistics will also be output to the text file created when clicking the save icon of the Setup Process Page. References Auto brightness button added to Embossing page CREASY Production Quality Control Auto select next crease Don t preview PDF to save time during operation Reports Layout optimized CREASY Embossing Embossing de-bossing job statistic: don t auto detect use selected row. Preview Window: straight blue line in case of embossing Crease measurement range Card board crease measurement limitation of 0.4mm depth No limit for bead measurement (calibration Point is 0,7mm!) CREASY Release Notes.doc 7 / 18 9/24/2015

8 Safe file path also when simply exiting the proper edit field in Software Configuration Page (beside CR key press). CREASY Improved capture procedure for composite brightness CREASY Load Company Logo and resize properly. Box Editor ERROR corrected: Multi Crease Specs has not been saved properly References ± Tolerance description added Do not Check Folding Angles out of Tolerance when measuring Multi Crease Additional brightness setting White, Gray, Dark Gray, Black, Composite Setup Installer Updated Language Files included Additional brightness setting White, Gray, Dark Gray, Black, Composite CREASY Installer Include EBOXDEF and FBOXDEF defaults even if not available on the USB Stick Capture with original image in (disabled) Calibration Additional Information for Calibration Operator in Window. BOBST Version: ask for updating only once not again after selecting another device to be connected. CREASY Updated Manuals Time limited Trial for PREMIUM Software Module (on request only) CREASY POWER CREASE Module can be activated including: o Additional CREASE Profile calculations (Section, Symmetry, Profile) o Reference database for Crease measurements and Embossing CREASY Release Notes.doc 8 / 18 9/24/2015

9 o Job Reports for Crease measurements and Embossing o Box Layout for Embossing o Job Statistics for Crease and Embossing o Mechanical accessory to hold the sample in flat position Updated manuals Select Device if more Devices should connect to the same software. CREASY Filter option in and Standards definition to filter noise on grainy surfaces Save captured images in Setup Process Mode. Embossing/De-bossing with positive numbers such as always MAX is the most interesting information Disable main screen functions that are not allowed to use when in job quality mode. Improved crease profile detection on glossy surfaces (silver/gold coatings) Setup Process mode : hide or display ABCDEFG selector depending on use of Reference Setup Process mode PDF report: Display selected ABCDEFG Group in case of active reference Tools: Use camera settings from standard if standard is selected Standards Disable all Edit fields of the Reference Window in case Edit References is disabled. Statistics Critical error in data file save routine corrected (double application of calibration) Save 3 digits (in mm) after decimal point in Statistics Data Text file (was 2 before) Display 3 digits after decimal point in Statistics Job Summary Table (Inch/mm) Error if Standard is unknown corrected CREASY Exchange calculation errors between mm and Inch corrected. CREASY v1.5.7 Crease measurement improved (graphical result display, limitations in depth and width optimized) BOBST uses PERET Manuals CREASY v1.5.6 Crease Measurement: intermediate level of 50% corrected. Crease Measurement: Crease width with level information in Table Crease Measurement: improved line positioning in result graph OPENING Calculation added to Crease measurements Crease Channel in Setup Process Mode: Depth in top line, Width in second line to be consistent with reference window ( BOBST version only) CREASY Release Notes.doc 9 / 18 9/24/2015

10 Standards A is parallel moved next to the Material and Creasing rule specifications as it is used by the calculator function and needs to be defined first. New Icon to measure references directly (for space reasons) Folding Point references added to Bead measurements Crease depth and width references (Power Crease License only) History Text Label added Buttons with Text at Check Box Narrow Opening (excluding line filtering) or Wide Opening (including line filtering) selector added Password protection for and References. Job Quality Reports For Tools (Crease Channel BOBST only) For Creasing (Power Crease License only) Job Statistics For Tools (Crease Channel BOBST only) For Creasing (Power Crease License only) CREASY v1.5.5 Bead measurement left and right angle calculation did not work properly in some cases: error corrected. Selector if values should be compared to references in Setup Process Mode CREASY v1.5.4 Save active functions and re-load on next program start Text embossing error corrected. No result has been calculated in some cases. Text embossing result graph improved Reports Japanese Font in Reports : Arial Unicode MS not installed warning CREASY v1.5.3 Select only current beads in box blank layout during production control (error introduced in v1.5.2 corrected) CREASE DEPTH calculation improved CREASY Release Notes.doc 10 / 18 9/24/2015

11 CREASE WIDTH calculation added Multi Contrast Camera Setting improved Multi Contrast capture function enabled in Crease Channel mode to measure Pertinax with high contrast differences (BOBST only) Embossing/De-bossing in 2 rows separated from each other Menu Items translations (Japanese) Prompt at CANCEL for Production Quality Control Job Reports Japanese Font in Reports (Arial Unicode MS Font needs to be installed) Minor rearrangement of reports Standards Channel Width calculation only for A and B in Premium mode, as the orientation of the crease lines is not fixed Power CREASE function BETA version for additional crease measurements in SetupProcess Mode. The additional values will be saved along with the original data when clicking the disc Icon Power CREASE Function License Code CREASY v1.5.2 Make the GUI fit for different Windows Screen (medium Font) Updated manuals GB,DE,IT,FR Dutch language Bead and Crease calculation Improved Bead and Crease detection in case of overexposed images (multiply crease and bead lines are visible in the main window) New Icon for Job Box blank measurement (to distinguish between Box Blank and Finished folded Box Jobs in future versions) PDF Icon for PDF Report creation functions in main Window to improve understandability. Box Editor Box Blank Icon added to open and save function to distinguish between box blank and finished box in future versions 200x78 pixels info Label added to the customized logo Standards Propose brightness settings Icon added CREASY Release Notes.doc 11 / 18 9/24/2015

12 CREASY v1.5.1 Verify BOBST logo in Report if no private Logo has been loaded in the settings window Setup Process table: show only the rows for active measurement values. Time Limited License for 90 days can be programmed at Factory Setup Process Crease measurements Statistical average line and measurement lines overlay improved Multi Cease Statistics generic number of beads (=1 in ) did not work - corrected. Cross Section Statistic in Setup Process implemented Main Updated manuals GB,DE,IT,FR CREASY v1.5.0 Cardboard Embossing Auto function for multiple embossing lines. CREASY v1.4.0 Round Corner Creasing Improved algorithms implemented Cardboard Embossing Select multiple levels with right mouse button while left mouse button is depressed. CREASY v Main Logos BOBST logo with BOBST only BOBST manuals DE,GB,FR,IT Rename exe file of BOBST version to CREASE_CHECKER.EXE Reference Window Save Brightness Bar position along with the reference CREASY v1.3.9 Main Logos BOBST product name = CREASE CHECKER CREASY Release Notes.doc 12 / 18 9/24/2015

13 Reference Window French text space corrected Box Editor Use file name from jpg as default in save dialog window Creasing Rule measurement (Crease Rule Upgrade Code required) CREASY v1.3.8 Display resolution in Inch 0.00, and Display resolution in mm 0.0, 0.00 and Display resolution in mil Main Updated manuals GB,DE,IT,FR CREASY v1.3.7 Inch, mm, mil Disable functions New Job Store job IDs since program start in a list and pre-select most recent job ID Save Job Setup Statistic data and reload data (output Header has to be selected in the settings Window) Run preview automatically at program start Finished Box measurement shows real angle in main Window after analysis CREASY v1.3.6 About Window BOBST About Window with BOBST link References Definition Window New Standard, or copy Standard will create unique New Standard xxx default names to avoid duplicate entries in the standards database. Verify Window Improved negative verify image recognition. CREASY Release Notes.doc 13 / 18 9/24/2015

14 CREASY v1.3.5 Click the camera icon to obtain large Preview in the. Click the camera symbol again to capture and analyze References Definition Window Additional Description text can be added to a reference and will be saved along with a Reference definition. About Window BOBST About Window redesigned CREASY v1.3.4 Graphical Reference display in mil: display resolution error corrected. Box Editor Display only the first character of crease type description as button label (premium version only) References Definition Window Reference measurement button for every single crease type selects only the active creasy type inside the graphical display of the box layout in the main window (premium version only) Reports Error in Red/Green Flag display corrected. Gray flag if no measurements have been taken. PDF file compression implemented to save memory space on hard disk. Statistics Use remote directory from the settings Window to search for reports in case a remote directory has been set. (premium version only) CREASY Server Updated to support new reference database and new box editor. (premium version only) Host Interface manual included CREASY v1.3.3 References Definition Window Box Editor access directly from Reference Window (premium version only) Reference measurement button for every single crease type (premium version only) Box Definition Editor (premium version only) Insert text description for every single letter. The text description will be printed to the PDF reports, displayed as Hint when moving the mouse pointer over the Characters inside the reference window or inside the Job Quality Page of the Main window. The text will be displayed for the actual selected crease in on the Job Quality Page of the Main window. Display Crease description inside hint Delete most recent measurement from Statistics on Setup Process Page CREASY Release Notes.doc 14 / 18 9/24/2015

15 Delete most recent measurement from Statistics on Job Quality Control Page Reports Display only measurements with Creasy type in Box Definition or number of Measurements > 0 Select destination directory for the Quality Reports on the Software configuration Page (premium version only) Japanese Language Calibration LUT implemented for better Instrument Agreement Higher physical brightness to improve measurement performance on black printed boxes Verify Verify Scale Reference Page added (premium version only) CREASY v1.3.2 Box Definition Editor (premium version only) 7 different types of creases can be used rather than 4 in basic version The Identifier for the crease type can be selected by double click on the crease type selector button. Any single box definition can use its own Identifiers as they are saved along with the box definition. The Identifier is composed of a single character. Reference definitions 7 different crease types are supported in premium version, each named with a single character identifier specified by the Box Definition Editor (premium version only) 1000 References rather than 100 can be defined Bead Width / Distance Label specifying the reference. Copy existing Reference Export Data Format configuration on REPORTS page Offer 7 different types of Creases with customized identifiers in setup process and production quality (premium version only) Reports Offer 7 different types of Creases with customized identifiers in Job Quality Report (premium version only) Job Statistics Report calculated for 7 different types of Creases Job Statistics Report including reference numbers Math Improved recognition of black printed carton CREASY v1.3.1 Calibration New Calibration Tool CREASY Release Notes.doc 15 / 18 9/24/2015

16 Improved angle recognition Red-Green Flag corrected in Production reports (and instead of or) Pre-set Target measurement camera settings when in Verify Window. CREASY v1.3.0 Display Improved Contrast in graphical result display Show optimum Bead based on reference data in Bead Measurements in graphical result display The horizontal orientation of the Bead drawing is automatically adjusted based on the average flat card board. Software Configuration Page added o Enable/Disable Reference edit mode (premium version only) o Select Reference Database file location (premium version only) High Resolution Customized Logo Reference definitions Upload customized box layout and link a customized layout to a reference definition (premium version only) The box Layout is displayed in large size in the main Window. The file name of the reference database is displayed in the head line of the reference window The reference database can be located on a server (local installation directory only for basic version). The location is set in the configuration in the settings page Software (premium version only) Box Definition Editor (premium version only) Load JPEG or JPG image of a Box and transform it into internal graphical resolution (W*H = 400*560 Pixels) and format (JPG). Add A,B,C,D measurement points to the creases Save the BOX definition into the BOXDEF directory of the Installation. JOB Statistics Re-enable all functions after Job PDF report creation Job statistics including Symmetry value Job statistics PDF report including Symmetry line Job statistics PDF report including max and min values Improved formatting of job statistics PDF report Measurement Result Pages are automatically adjusted to the space on screen Math s improvement Symmetry calculated based on the perpendicular from the barycenter of the bead down to the base line of the card board compared to the center of the Bead at the base line. Additional regression function applied in Bead width calculation to improve the repeatability of the readings in terms of bead width and fold point angles. Customer CREASY Verification CREASY Target including the functions to create a verification report in PDF format Calibration report Additional information is added to the calibration report. New calibration Target in use. New Factory Certificate Calibration Functionality not available in Standard Software and replaced by a verify feature CREASY Release Notes.doc 16 / 18 9/24/2015

17 CREASY Premium Upgrade Upgrade Code input In Help Menu. HOST Connection TCPIP Interface Hot Folder Interface CREASY Release Notes.doc 17 / 18 9/24/2015

18 CREASY v1.2.4 The Setup Process Window now follows the concept of A-B-C-D orientation of the crease In the setup Process Mode the previous measurement is graphically displayed with a red line in case of Bead and Crease readings. This allows a quick comparison of two subsequent readings. Switch ON/OFF this function in the settings Window. The Bead height and Bead width values in the tables are now displayed in red color if out of tolerance. The Font size of the tables has been increased to improve the visibility of the values. Click the A-B-C-D Symbol on top of a Column of the reference values in the reference Window to copy actual values from the Setup Process Window. In case there are average values available in the statistics table, these average values will be copied to the reference cells. In case the statistics is empty, the actual values will be copied. The most recently selected Standard is reloaded automatically at the next program start. A Multi Brightness setting has been added to the Brightness selection options on the left bottom of the Window. This setting captures different pictures with different camera settings improving the measurement result on areas covered with different colored ink. Whenever a single brightness can be used for measurements it is recommended to use a single brightness setting. The Brightness setting is linked to the standard, such as any standard requires the sample to be measured with the proper brightness setting. This makes the measurements more comparable to each other. The brightness symbol is added to the PDF reports. RED/GREEN Flag in PDF Job Reports added Plausibility Check for Bead height allows higher Beads (~0.9mm rather than 0.45mm) Set the number of decimal places in the settings window Save statistic data of setup process to tab delimited text file. CREASY v1.2.3 Scroll bars support the use of the software on screens with a resolution below 1280 Pixels in horizontal direction Improved algorithm for multi crease measurements CREASY v1.2.2 Minor error corrections in terms of mil-mm calculations in the Standards definition Window Disable the Job Statistics Icon if the PDF report actually is displayed to correct the PDF creation error. Field naming for Standard and User added to the Production Quality Control page of the main Window Black text inside the graphical display of the measurement result to improve the readability. Hide non card board material types in the standards window as there are no functional impacts to this. Rename paper board to card board in the standards window to use consistent terminology. Add units identifier (mm or mil) next to the reference numbers in reference Window CREASY v1.2.1 Branding for actual and future OEM versions Wider tolerances in the plausibility check of good and bad readings CREASY Release Notes.doc 18 / 18 9/24/2015