Lab Guide for Managing Hitachi Storage With Hitachi Command Suite v8.x

Size: px
Start display at page:

Download "Lab Guide for Managing Hitachi Storage With Hitachi Command Suite v8.x"

Transcription

1 Lab Guide for Managing Hitachi Storage With Hitachi Command Suite v8.x TSI2565 Courseware Version: v2.0 Microcode Version: Hitachi Command Suit v8.5

2 Table of Contents Lab 1 Installation 1-1 Lab 2 Initial Configuration 2-1 Lab 3 Administration 3-1 Lab 4 Storage Provisioning 4-1 Lab 5 Allocate Storage 5-1 Lab 6 Logical Groups 6-1 Lab 7 Tasks and Alerts 7-1 Lab 8 Command Line Interface Setup 8-1 Lab 9 Maintenance (Optional) 9-1 Corporate Headquarters Regional Contact Information 2825 Lafayette Street Americas: or info@hds.com Santa Clara, California USA Europe, Middle East and Africa: +44 (0) or info.emea@hds.com Asia Pacific: or hds.marketing.apac@hds.com Hitachi Data Systems Corporation All Rights Reserved. HITACHI is a trademark or registered trademark of Hitachi, Ltd. All other trademarks, service marks, and company names are properties of their respective owners. Notice: This document is for informational purposes only, and does not set forth any warranty, expressed or implied, concerning any equipment or service offered or to be offered by Hitachi Data System Corporation. ii

3 Lab 1: Installation Objective In this lab, you will learn how to install Hitachi Device Manager. Activities Install the Hitachi Device Manager server software Install the license key for Hitachi Device Manager Resources Hitachi Command Suite Installation and Configuration Guide

4 Lab 1: Installation Install the Hitachi Device Manager Server Software Prior to installing Device Manager in a user environment ensure all the prerequisites are met. The lab environment provided to you has been configured to meet the prerequisites. Before you begin: Refer to the Hitachi Command Suite Install and Configuration Guide to ensure your management server meets the minimum requirements Lab Tasks 1. Log on to the management server using the Administrator Account. 2. Check with your instructor on the location of the HSC8 install files folder. Change the directory to the folder. 3. Click index.html. A browser window gets launched with the install options. Note: if you are installing the software from the HCS DVD, index.html gets launched automatically. 4. Click Install next to Hitachi Device Manager. 5. When you are prompted, enter the required information. 6. In the Installation Completed window, select the When installation completes; open the Device Manager check box. 7. Click Finish. The login window is displayed. Note: If required you can log in without installing the license key. Install the License Key for Hitachi Device Manager Note: The instructor will provide the license key information to each student to complete this activity. 1. Click the Licenses button. 2. Select the File radio button and click Browse. 3. Navigate to the appropriate folder to select the license key file (check with instructor on license key file location). 4. Click Save. 5. Click the HDvM hyperlink under product column. Check License Key Details area to confirm if the key has been installed. 6. Close all the license dialogs to return to login screen. Record the information about the Hitachi Device Manager Server. Hostname IP Address End of Lab

5 Lab 2: Initial Configuration Objective In this lab, you will learn how to perform the process of initial configuration of Hitachi Device Manager (HDvM). Activities Install HDvM agent Register storage systems into Hitachi Device Manager Use HCS v8.x Online HELP function Use the HCS GUI dashboard Resources Hitachi Command Suite Installation and Configuration Guide Hitachi Command Suite Configuration Guide Hitachi Command Suite User Guide 2-1

6 Lab 2: Initial Configuration Install HDvM Agent Now that our Device Manager server is installed and operational; the next step is to register and configure hosts in Device Manager. Before you begin, there are five methods of registering hosts in Device Manager: Agent less Discovery Manual Addition of Host Device Manager Agent Installation on Host Perform Host Scan to create hosts by using Host Group name and associated information from storage system IMPORTHOSTS command Prior to installing the agent, determine the following information about your servers (check with instructor if required). HDvM Server Host 1 OS and Version IP Address User Name Password Note: You can discover hosts for other lab groups also but agent installation and configuration should be performed for servers assigned to you only. Lab Tasks 1. Discover the above Hosts by using Host Data Collector option in Device Manager. 2. Install Device Manager Agent on Hosts allocated to you. 3. Use IMPORTHOSTS command to add hosts to HCS. When the above tasks are completed, answer the following questions: 1. Can the Host Scan be scheduled? 2. Can the HDvM Agent report host data based on a schedule? 3. Does the Host Data Collector support replication configuration? 4. Does the Hitachi Device Manager Agent support replication configuration? 5. Which user/password had to be specified for host discovery using Host Data Collector? 6. Which user/password had to be specified for Device Manager Agent to report host information? Register Storage Systems Into Hitachi Device Manager The next step in the initial configuration is to register all storage systems that will be managed through Device Manager. 2-2

7 Lab 2: Initial Configuration Before proceeding, determine the following information about your Storage Systems (check with instructor if required): Storage System Type VSP G1000, VSP, AMS IP Address1/ IP Address2 User Name/ Password HostName Ports Connected on Storage 1 Lab Tasks 1. Register the above systems in Device Manager. 2. Refresh the storage system information in Device Manager. Identify Other Views 1. Add Storage System. 2. Refresh Storage System. Use HCS v8.x Online HELP Function Now online HELP function is available in Hitachi Command Suite (HCS) v8. We encourage you to use this function during the lab activities. Using Online HELP 1. From the Menu click Help > Online Manual. 2. Take a few minutes and become comfortable using this feature. Try the Help SEARCH facility. Note: As you go through the lab you will also see a Question Mark (?) on some of the screens. By clicking on this Question mark, it will take you to the online Help section which discusses the content that you are looking at on the particular screen. Use the HCS GUI Dashboard After you log in to HCS, you are presented with the HCS Dashboard. It shows a summary of tasks, alerts, and activities of registered storage systems. Notice the different sections. At this point you will begin customizing your Dashboard. You can customize the Dashboard to display only reports that you want and to control the layout and display of the reports. On the Dashboard, there are several ways to view managed storage systems and Hosts. In this lab you will be exploring each way. 1. From the Resources tab, select All Storage Systems. In the Main Information Area, you can click on each registered storage system and navigate through all of its resources (DP Pools; DT Pools; Parity Groups; Volumes, and so on). Also, you can select registered Hosts to see which hosts are managed. 2-3

8 Lab 2: Initial Configuration 2. From the Administration tab, select Managed Resources. In the Main Information Area you can select the Storage Systems and Hosts tabs to view information about those resources. Customize the Dashboard 1. Click the Dashboard Settings button to select the reports you want to display. 2. In this lab, since HCS is not linked with a file server (HNAS) or Data Ingestor (HDI), uncheck the box for the Top 10 File Systems. 3. Make sure the box is checked for the Top 10 Consumers. 4. Click OK. Notice the changes to the Dashboard. 5. You can also change the location of a report by dragging the title bar to a new location on the Dashboard. 6. Try doing this for one of the reports. Review Report Details 1. Each report has an Arrow icon. This displays details about that report. 2. In the Datacenter Utilization Physical Capacities report, click the Arrow icon. 3. Review the information 4. Try doing that for some of the other reports as well. 5. Explore using the other icons for the reports. End of Lab

9 Lab 3: Administration Objective In this lab, you will learn how to perform some standard administration tasks. Activities Configure options Create new user environment Create virtual storage machine Resources Hitachi Command Suite Configuration Reference Guide Configure Options Note: In this lab you will not be configuring security options such as specifying password conditions and automatic locking of user accounts. Setting a Warning Banner Message You can set a warning banner message that will appear in the login window when a user logs on. 1. From the Administration tab, select Security. 2. In the Security screen, select Warning Banner. 3. In the Warning Banner screen, click Edit Message. 4. In the Edit Message screen enter the following message The Hitachi Command Suite World of Mobile Works, Inc. (or enter a message of your choice). 5. Preview it. 6. Click OK. 7. Log out of HCS. Notice your message on the login screen. 8. Log back in to HCS. Create New User Environment You have decided to accept the help of a new team member to collect reporting information from Device Manager. Because the new team member is not familiar with Device Manager, you have decided to create a new user in Device Manager with View permissions and let the team member use the new user ID for logging into Device Manager. 3-1

10 Lab 3: Administration Lab Tasks Note: Check your group number before starting the Lab. 1. Create 2 new users in Device Manager. (Name them labx1 and labx2 where x=group Number.) 2. Assign Admin permissions to the new users. 3. Create a new Resource group. (Name it rgx where x=group Number.) 4. Include the resources assigned to you in your resource group. 5. Create a new User group. (Name it ugx where x=group Number.) 6. Assign Admin role for managing the Resource group. 7. Add users created in step 1 to this User group. 8. Login with the new user. When the above tasks are completed, answer the following questions: 9. What resources are displayed under Volumes and Parity groups? 10. Can you create new Resource groups/user groups? 11. What permissions does the user HAUSER have? (HAUSER was the user you specified when you configured the Host Agent.) 12. Can you register a new Storage System/Host? Create Virtual Storage Machine A Virtual Storage Machine represents resources, such as a storage system, parity groups, LDEV IDs, that are grouped together and types of information, such as model types and product numbers, which are assigned virtually. Hosts can access the resources of virtual storage machines by using the virtual information. Create New Virtual Storage Machine 1. On the Administration tab, select Virtual Storage Machine. 2. Click Create Virtual Storage Machine. 3. Specify the virtual attributes of the Virtual Storage Machine. a. Name b. Select a storage system already registered on HCS 4. Specify the physical resources you want to add in Virtual Storage Machine a. Storage Systems b. Parity Groups c. LDEV IDs d. Storage Ports e. Host Group Numbers 5. Click Submit. 6. Check the Tasks & Alerts > System Tasks tab to verify that the tasks have completed successfully. End of Lab

11 Lab 4: Storage Provisioning Objective In this lab, you will learn how to work with Hitachi Dynamic Provisioning and Hitachi Dynamic Tiering. Activities Provision storage with Hitachi Dynamic Provisioning (HDP) and Hitachi Dynamic Tiering (HDT) Virtualize storage Resources Hitachi Command Suite User Guide 4-1

12 Lab 4: Storage Provisioning Provision Storage with Dynamic Provisioning and Dynamic Tiering After the Storage Systems and Hosts are registered in Device Manager, the next step is to prepare different types of volumes on the storage system. Depending on the Storage System type, Device Manager supports configuring the following types of volumes on the storage system: Dynamic Provisioning Volumes (HDP/HDT) External Volumes (Enterprise Storage Only) Internal Volumes Create Dynamic Provisioning Pool The pool is created by adding capacity (Parity Groups/Logical Volumes). The items that must be specified when creating a Dynamic Provisioning pool are listed below. Pool capacity Parity group Capacity required To create a dynamic provisioning pool: 1. From the Resources tab, in the navigation tree, select Pools under the target storage system. 2. Click Create Pool. The Create Pool dialog opens. 3. Specify the pool name and other necessary information. 4. Add 1 parity group. 5. Expand Advanced options. 6. Specify pool ID (list shows available IDs). 7. Enable Subscription setting. 8. Set Subscription Threshold Warning 10%, Limit 100%. 9. Click Show Plan to verify the plan and then click Execute. 10. The plan is registered as a task. View the task status to confirm that it completed. 11. In the Storage tree, return to the target storage system, click DP Pools and confirm that the pool is created. 12. Select the row with your pool and click Expand Pool. 13. Select the parity group to be added to the pool. Click Show Plan. 14. Expand Plan Details. Check the expansion capacity vs. free capacity on the parity group. The pool gets expanded by volume capacity. Create Dynamic Tiering Pool To create a dynamic tiering pool: 1. From the Resources tab in the navigation tree, select Pools under the target storage system. 2. Click Create Pool. The Create Pool dialog opens. 3. Specify the pool name and select Enable for Hitachi Dynamic Tiering. 4-2

13 Lab 4: Storage Provisioning 4. Depending on your storage system configuration, the Available Tiers will be listed for your selection. Select all the tiers. Note: When you select a Tier, the related Tier tab under Parity Groups section becomes activated. 5. The next step is to add capacity to each Tier. Select the tab for a Tier under the Parity Group section. Click on Select Parity Group to select and add capacity to the tier. Repeat the process for each Tier you selected in the previous step. 6. Set the following options in HDT Options section. a. Tier Management (Auto) 1 hour. b. Monitoring Mode Periodic. 7. Click Show Plan to verify the plan and then click Submit. 8. The plan is registered as a task. View the task status to confirm that it completed. 9. In the Storage tree, return to the target storage system, and then click DP Pools. Confirm that the pool is created. Virtualize Storage Virtualizing volumes is the process of mapping volumes in a source storage system to a target storage system. The volumes in the source storage system (registered and referred to as external volumes) then can be managed in the same way as the volumes in the target storage system (registered and referred to as internal volumes). Collect the following information from your instructor before moving to the lab steps: Storage Serial Number Path 1 (port) Internal > External Path 2 (port) Internal > External Internal Storage External Storage Configure External Ports Before you begin: For VSP and earlier storage systems use the Element Manager to change Path1/Path2 ports on the Internal Storage to External. For VSP G1000 use Ports/Host Groups to edit port configuration and set External attribute. Perform these steps to virtualize volumes: 1. From the Actions menu, select Virtualize Volumes. 2. Specify the appropriate information. 3. To change default values, click Paths, Path Priority Setting, Host Group, LUN Number Setting and External Volume Configuration. a. Click Edit External Paths. Validate the Paths settings. 4-3

14 Lab 4: Storage Provisioning b. If paths settings are incorrect, click Clear Paths. c. Double click the correct ports in the External Storage port list to move to the Path Editor window. d. In the Path Editor window, click and drag the external storage ports to the internal storage port to specify the link. e. Click OK. 4. Click Show Plan to review the plan and specify additional information, as appropriate. Verify the information that is displayed. 5. Click Submit. 6. When the task completes, check the storage system list to confirm that the external volumes are mapped to the target storage system. Create Volumes You create volumes by using the available space in a Hitachi Dynamic Provisioning (HDP)/Hitachi Dynamic Tiering (HDT) pool or Parity group, and then access the volumes when you are ready to allocate them to a host. Use Create Volumes to create Dynamic Provisioning volumes from the pool created earlier in the lab. 1. Create 6 volumes of 2GB each. 2. Check the size of the pool and create a volume that is 100% of the size. 3. Check the task status and error message you get (because you are exceeding the subscription threshold limit). 4. Check the number of DP-VOLs by navigating to storage > Pools > Your Pool > DP-VOLs. 5. Create 6 volumes of Basic Internal Volumes of 2GB each. 6. From the Actions menu, select Create New Volumes. 7. Specify the appropriate information (Basic Volume, Internal). 8. Click Show Plan to review the plan and specify additional information, as appropriate. 9. Click Execute. 10. When the task completes, verify that the volumes appear in the Open-Unallocated volume list in the Resources tab. End of Lab

15 Lab 5: Allocate Storage Objective In this lab, you learn how to allocate storage to a host and unallocate storage. Activities Allocate volume to the host Unallocate volume Resources Hitachi Command Suite User Guide 5-1

16 Lab 5: Allocate Storage Allocate Volume to Host Now that the storage provisioning has been done in the last lab you will allocate volume to the host. Before you begin: Before allocating volumes to a host or file server, you must verify that the host, file server, and storage systems are registered in Hitachi Command Suite. If you want to select volumes from a tier, Tiered Storage Manager license must be enabled. In addition, determine: The target host or file server The volume type, count, capacity, and performance characteristics An appropriate storage system Process: 1. From the Actions menu, select Allocate Volumes. The Allocate Storage dialog opens. 2. Follow the instructions to specify necessary settings and then create the task. 3. For the Volume Type, select Basic Volume. 4. Choose the Volume Location as Internal. 5. In the Advanced Options, set the Format Type as Normal Format (if required). Note: The Format Type prompt appears only if the volume with the required capacity is not available. 6. Click Show Plan to review the plan and specify additional information. 7. Click Submit. 8. When the task completes, confirm that the volumes are recognized by the target host. Note: When allocation completes, the administrator must mount the volume and create a file system to make the volume writable (refer to file system operations section). 9. Click the Tasks and Alerts Tab. 10. Click on your task name and find out the volume IDs that were created. Additional Task: Identify other screens from where you can launch the Allocate Volume Task. Go through all the screens but do not complete the task: 5-2

17 Lab 5: Allocate Storage Use Allocate Like Volumes to allocate storage to the Host. Identify the differences between Allocate Like Volumes and Allocate Volumes by selecting a specific host. Unallocate Volume You must unallocate a volume before it can be reused or taken offline. You should also unallocate all the volumes assigned to the UNIX server. Before you begin: Back up all necessary data from the volume, and review prerequisites for unallocating volumes You must have administrator permission to perform this task Unmount/remove drive letters from the host before unallocating the volume To unallocate volumes: 1. From the Actions menu, select Unallocate Volumes. 2. From the Host list, select the host to which the target volume is currently allocated. 3. From the Volumes, select any one volume. Click the row to select it. 4. Click Show Plan to review the plan and specify additional information, as appropriate. Expand Advanced Option. 5. Note the options available:. 6. Click Submit. When the task completes, confirm that the volumes are no longer recognized by the host. 7. When the unallocation completes, the data stored on the volume is no longer accessible by the host. Identify other screens from where you can launch the Unallocate Storage Task: 5-3

18 Lab 5: Allocate Storage Additional Tasks 1. Go through all the screens but do not complete the tasks. 2. Reallocate the volumes you unallocated in the previous step (to the same server). End of Lab

19 Lab 6: Logical Groups Objective In this lab, you will practice how to manage storage with logical groups. Activities Create Logical Groups Resources Hitachi Command Suite User Guide 6-1

20 Lab 6: Logical Groups Create Logical Groups After storage provisioning, you need to manage your storage. You also have to simplify and provision clustered servers using the logical group feature. Before you begin: Determine the type of Logical Group that should be created, either public or private Lab Task: Create the logical groups View the Summary Report Process: Create the Logical Groups 1. On the Resources tab, select Logical Groups. 2. Select the type of logical group to be created. Note: For a Public Logical Group, select the Public Logical Groups root folder and then click Create Logical Group in the Main Information Area. For a Private Logical Group, select the Private Logical Groups root folder. Select a top-level folder for each user group under the Private Logical Group folder, and then click Create Logical Group in the Main Information Area. 3. In the Create Logical Group dialog box, enter information in the Name and Description fields. 4. Next, select one of the Folder, Group of hosts, or Group of volumes options for the Create as option. Steps for each of the options are shown separately below. 5. Repeat this process for each new logical group that you want to create. 6. In the Resources tab, click Logical Groups and confirm that the logical groups you created are present. Create a Folder 1. To create a folder, click the Folder option and click OK. Create a Group of Hosts 1. Click the Group of hosts option. 2. Select how to specify hosts for a logical group by choosing one of the following options: By Search Criteria or Manually. 3. To specify hosts By Search Criteria, do the following: a. Click Add Criteria in the list of criteria. b. In the Add Conditions dialog box, specify values for IP Address Criteria, Name Criteria, and Operating System Criteria as needed. 6-2

21 Lab 6: Logical Groups Note: You can also choose to click Search Result Preview, select one or more hosts in the list of hosts, and then click Add to add them to the list of hosts, and finally click OK. 4. To specify hosts Manually, do the following: a. If you select Manually, click Add Hosts. b. In the Add Hosts dialog box, select one or more hosts from the lists of hosts. c. Click Add to add them to the list of selected hosts, and then click OK. Create a Group of Volumes 1. To create a group of volumes, click the Group of volumes option. 2. Choose how to specify volumes for a logical group by selecting one of the following options: By Search Criteria or Manually. 3. To specify volumes By Search Criteria, do the following: a. If you select By Search Criteria, click Add Criteria in the list of criteria. b. In the Add Conditions dialog box, specify values for Usage Criteria, Storage System Criteria, and Volume Criteria as needed. Note: You can also choose to click Search Result Preview, select one or more volumes in the list of selected volumes, and click Add, and then click OK. 4. To specify volumes Manually, do the following: a. If you select Manually, click Add Volume. b. In the Add Volumes dialog box, select one or more volumes from the list of available volumes. c. Click Add to add them to the list of selected volumes, and then click OK. Identify the tasks that can be launched from the logical groups: 6-3

22 Lab 6: Logical Groups View Usage Summary Report You will now create and view the Logical Group Usage Summary Report for one or more of your Logical Groups that you just created. It will be a CSV file. 1. From the Resources tree, select the Logical Group Folder you just created. 2. In the Main Information Area, click the Actions drop-down list and then click on Export To CSV. a. In the Export To CSV window, click Save to save the CSV file on the main console desktop. b. Open the CSV file and view the format of the information. End of Lab

23 Lab 7: Tasks and Alerts Objective In this lab, you will learn about the utility of the Tasks & Alerts tab. Activities Check Task Status Check Alerts 7-1

24 Lab 7: Tasks and Alerts Check Task Status There are three types of tasks in Hitachi Command Suite (HCS): HCS Tasks tasks that are submitted using Hitachi Command Suite Device Manager/System Tasks tasks that are specific to Hitachi Virtual Storage Platform G1000 systems and are submitted using Device Manager Storage Navigator Data Collection Tasks tasks created by adding, refreshing, editing, and removing storage systems, file servers, and hosts Lab Tasks 1. On the Tasks & Alerts tab, select the Task Type and choose Device Manager task. 2. Check the status of the Device Manager task on the Uncompleted Tasks tab or the History tab. 3. View the task status in the Status column. 4. To display task details, click the task name link in the summary column. For further review: 1. Create a Create Volume task for the future by scheduling the execution for a future date. a. Can you cancel and/or delete the task? 2. Create a Create Volume task to execute immediately. a. While the task is in progress, can you cancel and/or delete the task? Check Alerts 1. On the Tasks & Alerts tab, click Alerts. 2. Click on an alert to review the alert details and take appropriate action. 3. If appropriate, delete the alert. To delete an alert select the row for the alert. To delete multiple alerts at once, select the rows for each of the alerts. Click Delete Alerts. 4. Click OK. End of Lab

25 Lab 8: Command Line Interface Setup Objective In this lab, you will learn how to set up Hitachi Device Manager command line interface (CLI). Activities Configure CLI for Hitachi Device Manager Validate configuration by using simple CLI commands Resources Hitachi Command Suite CLI Reference Guide 8-1

26 Lab 8: Command Line Interface Setup Configure CLI for Hitachi Device Manager You are planning to script some of the daily operations tasks using CLI. Before that you need to install and configure the CLI package. Download and Install CLI You can download Device Manager CLI from the Device Manager server using the Web Client. Note: You must have modify or higher permission to perform this task. 1. From the Tools menu, select Download. 2. The download dialog appears. 3. Select the Download link corresponding to the OS of the machine on which CLI is to be installed. 4. Decompress the copied file. Verify Java Is Installed 1. To check the version of Java, execute the following command in the directory where Device Manager CLI is run: java version 2. Successful execution of the above command validates that Java is installed and PATH variable is set appropriately for CLI to work. 3. If the above command fails, reinstall JavaX. End of Lab

27 Lab 9: Maintenance (Optional) Objective In this lab, you will perform various maintenance tasks such as backing up and restoring databases. Activities Back up Hitachi Relational Database Restore Hitachi Relational Database Agent Commands Collect Logs Resources Hitachi Command Suite Installation and Configuration Guide 9-1

28 Lab 9: Maintenance (Optional) Back Up Hitachi Relational Database Your environment is now completely configured. You want to take a backup of your database so that you have a copy in case something goes wrong. You also need to test the procedure for restoring the database and the procedure for collecting logs. Note: The following operations need to be performed from the Hitachi Device Manager server. Lab Tasks 1. Back up Hitachi Relational Database to the folder C:\dvmbackup by entering the following command: C:\Program Files\HiCommand\Base64\bin\hcmds64backups /dir C:\dvmbackup /auto 2. After the command has finished, review the files generated in the backup folder. 3. Log in to Device Manager with a Web Browser and perform a Remove Subsystem operation of the Hitachi enterprise system. 4. Once this is finished, return to the command prompt to restore the Device Manager Database. Restore Hitachi Relational Database To perform a Hitachi Relational Database restore, all Device Manager related services must be stopped. The Common Repository and the Device Manager Database file must be synchronized. This will be achieved by editing the server.properties file found in: C:\Program Files\HiCommand\DeviceManager\HiCommandServer\config\ Lab Tasks 1. Open the server.properties file in a text editor and find the line. # Synchronize Device Manager database and Common Repository in starting Device Manager Server server.base.initialsynchro=false 2. Change false to true in this line. Save the changes. 3. Execute the following command to start the restore process: C:\Program Files\HiCommand\Base64\bin\hcmds64db /restore C:\dvmbackup\database\backup.hdb /type DeviceManager /auto 4. After the restore is complete, log in to Device Manager using a Web browser. What type of operation would be appropriate to ensure that the Hitachi Relational Database has been successfully restored? 5. Return to the command prompt and change the entry for synchronization in the server.properties back to false. 9-2

29 Lab 9: Maintenance (Optional) Note: Putting synchronization back to false is required to prevent Device Manager from synchronizing every time the services are started. Agent Commands Note: The following commands need to be executed on the server where agent is installed. 1. Agent install folder Windows c:\program files\hitachi\ Unix - /opt/ 2. Check Status of Hitachi Device Manager (HDvM) agent by using the following code: <Agent_Install_folder>/HDVM/HBaseAgent/bin/hbsasrv 3. Stop HDvM agent by using the following code: <Agent_Install_folder>/HDVM/HBaseAgent/bin/hbsasrv stop 4. Start HDvM agent by using the following code: <Agent_Install_folder>/HDVM/HBaseAgent/bin/hbsasrv start 5. Check Status of HDvM agent by using the following code: <Agent_Install_folder>/HDVM/HBaseAgent/bin/hbsasrv 6. Display disk details for current server by using the following code: <Agent_Install_folder>/HDVM/HBaseAgent/util/bin/hldutil 9-3

30 Lab 9: Maintenance (Optional) Collect Logs Collect Device Manager Server Logs The command hcmdsgetlogs captures all error-related information for Hitachi Device Manager (HDvM) servers. 1. Run the following command: C:\Program Files\HiCommand\Base64\bin\hcmds64getlogs /dir <output directory> 2. To compress the file during creation, you can extend the command with the following parameters: C:\Program Files\HiCommand\Base64\bin\hcmds64getlogs /dir <output directory> [/type application-name] [/arc archive-file-name] 3. The following shows an example of executing the command: C:\Program Files\HiCommand\Base64\bin\hcmds64getlogs /dir C:\hcmds_logs /arc dvm_log1 Collect Device Manager Agent Logs The Trouble Information Collector (TIC.bat) file is used to collect all required error information from Device Manager Agent. 1. Execute the following command: C:\Program Files\Hitachi\HDVM\HBaseAgent\bin\ TIC.bat -outdir C:\dvmagtlogs 2. Ensure the error information has been created in the specified target folder. End of Lab

Hitachi Data Systems. Hitachi Virtual Storage Platform Gx00 with NAS Modules NAS Platform (System LU) Migration Guide MK-92HNAS078-00

Hitachi Data Systems. Hitachi Virtual Storage Platform Gx00 with NAS Modules NAS Platform (System LU) Migration Guide MK-92HNAS078-00 Hitachi Data Systems Hitachi Virtual Storage Platform Gx00 with NAS Modules NAS Platform (System LU) Migration Guide MK-92HNAS078-00 2011-2016 Hitachi, Ltd. All rights reserved. No part of this publication

More information

Hitachi Virtual Storage Platform

Hitachi Virtual Storage Platform Hitachi Virtual Storage Platform Documentation Roadmap FASTFIND LINKS Contents MK-90RD7039-06 2011 Hitachi Ltd, All rights reserved. No part of this publication may be reproduced or transmitted in any

More information

Hitachi Data Instance Director

Hitachi Data Instance Director Hitachi Data Instance Director Quick Start Guide FASTFIND LINKS Software Version Getting Help Contents MK-93HDID002-01 2013-2015 Hitachi, Ltd. All rights reserved. No part of this publication may be reproduced

More information

Hitachi Device Manager Release Notes

Hitachi Device Manager Release Notes Hitachi Device Manager 8.1.2-03 Release Notes Contents Contents... 1 About this document... 1 Intended audience... 1 Getting help... 2 About this release... 2 Product package contents... 2 New features

More information

Management Abstraction With Hitachi Storage Advisor

Management Abstraction With Hitachi Storage Advisor Management Abstraction With Hitachi Storage Advisor What You Don t See Is as Important as What You Do See (WYDS) By Hitachi Vantara May 2018 Contents Executive Summary... 3 Introduction... 4 Auto Everything...

More information

Hitachi Command Suite

Hitachi Command Suite Hitachi Command Suite Virtual Appliance Installation Guide MK-92HC236-01 2016 Hitachi, Ltd. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,

More information

System Manager Unit (SMU) Hardware Reference

System Manager Unit (SMU) Hardware Reference System Manager Unit (SMU) Hardware Reference MK-92HNAS065-02 Notices and Disclaimer Copyright 2015 Hitachi Data Systems Corporation. All rights reserved. The performance data contained herein was obtained

More information

Hitachi Converged Adapter 2.0 for Microsoft SCOM 2012 Administration Manual HCA for SCOM Administration Manual

Hitachi Converged Adapter 2.0 for Microsoft SCOM 2012 Administration Manual HCA for SCOM Administration Manual Hitachi Converged Adapter 2.0 for Microsoft SCOM 2012 Administration Manual MK-92UCP082-01 2014-2016 Hitachi Data Systems Corporation. All rights reserved. No part of this publication may be reproduced

More information

Maximize Operational Efficiency in a Tiered Storage Environment

Maximize Operational Efficiency in a Tiered Storage Environment W H I T E P A P E R : T E C H N I C A L Maximize Operational Efficiency in a Tiered Storage Environment Use Cases for Orchestrated Volume and Page-based Migration with Hitachi Tiered Storage Manager (HTSM)

More information

Hitachi Data Ingestor

Hitachi Data Ingestor Hitachi Data Ingestor Cluster Getting Started Guide Product Version Getting Help Contents MK-90HDI001-13 2010-2015 Hitachi, Ltd. All rights reserved. No part of this publication may be reproduced or transmitted

More information

Hitachi Storage Command Portal Software Version 6.4 Release Notes

Hitachi Storage Command Portal Software Version 6.4 Release Notes Hitachi Storage Command Portal Software Version 6.4 Release Notes Table of Contents About This Document... 1 Intended Audience... 1 Getting Help... 1 About This Release... 2 New Features and Important

More information

Hitachi Virtual Storage Platform

Hitachi Virtual Storage Platform Hitachi Virtual Storage Platform Hitachi Volume Shredder User Guide Document Organization Product Version Getting Help Contents MK-90RD7035-08 December 2016 2010-2016 Hitachi, Ltd. All rights reserved.

More information

BBI Quick Guide Networking OS for 1/10Gb LAN Switch Module

BBI Quick Guide Networking OS for 1/10Gb LAN Switch Module BBI Quick Guide Networking OS for 1/10Gb LAN Switch Module FASTFIND LINKS Product Version Getting Help Contents MK-99CB2500038-00 2014 Hitachi, Ltd. All rights reserved. No part of this publication may

More information

Hitachi Virtual Storage Platform G1000

Hitachi Virtual Storage Platform G1000 Hitachi Virtual Storage Platform G1000 Hitachi Volume Shredder User Guide FASTFIND LINKS Contents Product Version Getting Help MK-92RD8025-01 2014 Hitachi, Ltd. All rights reserved. No part of this publication

More information

Hitachi File Services Manager Release Notes

Hitachi File Services Manager Release Notes Hitachi File Services Manager 5.3.0-00 Release Notes Copyright 2011, 2015, Hitachi, Ltd., Hitachi Data Systems Corporation, ALL RIGHTS RESERVED Notice: No part of this publication may be reproduced or

More information

Hitachi Unified Storage and Hitachi NAS Platform Specifications

Hitachi Unified Storage and Hitachi NAS Platform Specifications Hitachi Unified Storage and Specifications ransform Virtualization Economics Reliable Trusted Innovate Information Global Change Inelligent Technology Services Value Insight Opportunity Social Infrastructure

More information

Hitachi Command Suite

Hitachi Command Suite Hitachi Command Suite 8.6 Virtual Appliance Installation Guide This manual explains how to use the virtual appliance for Hitachi Command. MK-92HC236-02 May 2018 2016, 2018 Hitachi, Ltd. All rights reserved.

More information

DSS User Guide. End User Guide. - i -

DSS User Guide. End User Guide. - i - DSS User Guide End User Guide - i - DSS User Guide Table of Contents End User Guide... 1 Table of Contents... 2 Part 1: Getting Started... 1 How to Log in to the Web Portal... 1 How to Manage Account Settings...

More information

HITACHI VIRTUAL STORAGE PLATFORM F SERIES FAMILY MATRIX

HITACHI VIRTUAL STORAGE PLATFORM F SERIES FAMILY MATRIX HITACHI VIRTUAL STORAGE PLATFORM F SERIES FAMILY MATRIX F600 F800 Storage Platform F1500 Capacity Specifications Max. Number of Flash Drives, Including Spares 192 FMD 384 SSD 288 FMD 576 SSD 576 FMD 1,152

More information

Hitachi WAN Optimizer VMware vsphere Setup Guide

Hitachi WAN Optimizer VMware vsphere Setup Guide Hitachi WAN Optimizer VMware vsphere Setup Guide FASTFIND LINKS Contents Product Version Getting Help MK-95HWO002-00 July 2016 2007, 2016 Hitachi, Ltd. All rights reserved. No part of this publication

More information

IT Essentials v6.0 Windows 10 Software Labs

IT Essentials v6.0 Windows 10 Software Labs IT Essentials v6.0 Windows 10 Software Labs 5.2.1.7 Install Windows 10... 1 5.2.1.10 Check for Updates in Windows 10... 10 5.2.4.7 Create a Partition in Windows 10... 16 6.1.1.5 Task Manager in Windows

More information

End User Manual. December 2014 V1.0

End User Manual. December 2014 V1.0 End User Manual December 2014 V1.0 Contents Getting Started... 4 How to Log into the Web Portal... 5 How to Manage Account Settings... 6 The Web Portal... 8 How to Upload Files in the Web Portal... 9 How

More information

Hitachi Content Platform HCP Data Migrator 6.1 Release Notes HCP-DM Version June 27, 2014

Hitachi Content Platform HCP Data Migrator 6.1 Release Notes HCP-DM Version June 27, 2014 Hitachi Content Platform HCP-DM Version 6.1.0.9 June 27, 2014 RN-90ARC031-10 2014 Hitachi Data Systems Corporation. All rights reserved. No part of this publication may be reproduced or transmitted in

More information

Hitachi File Services Manager Release Notes

Hitachi File Services Manager Release Notes Hitachi File Services Manager Release Notes Copyright 2011, 2015, Hitachi, Ltd., Hitachi Data Systems Corporation, ALL RIGHTS RESERVED Notice: No part of this publication may be reproduced or transmitted

More information

Hitachi Data Instance Director Disaster Recovery Reference

Hitachi Data Instance Director Disaster Recovery Reference Hitachi Data Instance Director Disaster Recovery Reference FASTFIND LINKS Software Version Getting Help Contents MK-93HDID004-00 2015 Hitachi, Ltd. All rights reserved. No part of this publication may

More information

Hitachi File Services Manager Release Notes

Hitachi File Services Manager Release Notes Hitachi File Services Manager 5.3.3-00 Release Notes Copyright 2011, 2016, Hitachi, Ltd., Hitachi Data Systems Corporation, ALL RIGHTS RESERVED Notice: No part of this publication may be reproduced or

More information

Hitachi Data Ingestor

Hitachi Data Ingestor Hitachi Data Ingestor Backup Restore Features Supplement for Hitachi Data Protection Suite Product Version Getting Help Contents MK-90HDICOM009-03 2010-2016 Hitachi, Ltd. All rights reserved. No part of

More information

Hitachi Data Ingestor

Hitachi Data Ingestor Hitachi Data Ingestor Cluster Getting Started Guide Product Version Getting Help Contents MK-90HDICOM001-02 2010-2016 Hitachi, Ltd. All rights reserved. No part of this publication may be reproduced or

More information

Hitachi Storage Management Pack for VMware vrealize Operations Dashboard User s Guide

Hitachi Storage Management Pack for VMware vrealize Operations Dashboard User s Guide Hitachi Storage Management Pack for VMware vrealize Operations Dashboard User s Guide FASTFIND LINKS Document Organization Software Version Getting Help Contents MK-92ADPTR082-02 All Rights Reserved, Copyright

More information

Hitachi Data Instance Director

Hitachi Data Instance Director Hitachi Data Instance Director Quick Start Guide FASTFIND LINKS Software Version Getting Help Contents MK-93HDID002-02 2013-2015 Hitachi, Ltd. All rights reserved. No part of this publication may be reproduced

More information

Hitachi Data Ingestor Hyper-V Installation Guide 6.0.0

Hitachi Data Ingestor Hyper-V Installation Guide 6.0.0 Hitachi Data Ingestor Hyper-V Installation Guide 6.0.0 This guide provides instructions for installing Hitachi Data Ingestor (HDI) on Hyper-V. Instances of HDI installed on Hyper-V are referred to as VMA.

More information

CDP Data Center Console User Guide CDP Data Center Console User Guide Version

CDP Data Center Console User Guide CDP Data Center Console User Guide Version CDP Data Center Console User Guide CDP Data Center Console User Guide Version 3.18.2 1 README FIRST Welcome to the R1Soft CDP Data Center Console User Guide The purpose of this manual is to provide you

More information

Acronis Backup & Recovery 11 Beta Advanced Editions

Acronis Backup & Recovery 11 Beta Advanced Editions Acronis Backup & Recovery 11 Beta Advanced Editions Quick Start Guide Table of contents 1 Main components... 3 2 Supported operating systems... 3 3 Where do I install the components?... 3 4 What you need

More information

Hitachi Storage Adapter for VMware vcenter Operations Management Suite Dashboard User s Guide

Hitachi Storage Adapter for VMware vcenter Operations Management Suite Dashboard User s Guide Hitachi Storage Adapter for VMware vcenter Operations Management Suite Dashboard User s Guide FASTFIND LINKS Document Organization Software Version Getting Help Contents AS-312-03 All Rights Reserved,

More information

Hitachi File Services Manager Release Notes

Hitachi File Services Manager Release Notes Hitachi File Services Manager 6.1.1-00 Release Notes Copyright 2011, 2016, Hitachi, Ltd., Hitachi Data Systems Corporation, ALL RIGHTS RESERVED Notice: No part of this publication may be reproduced or

More information

Oracle Enterprise Manager. 1 Introduction. System Monitoring Plug-in for Oracle Enterprise Manager Ops Center Guide 11g Release 1 (

Oracle Enterprise Manager. 1 Introduction. System Monitoring Plug-in for Oracle Enterprise Manager Ops Center Guide 11g Release 1 ( Oracle Enterprise Manager System Monitoring Plug-in for Oracle Enterprise Manager Ops Center Guide 11g Release 1 (11.1.3.0.0) E18950-03 November 2011 This document provides describes the System Monitoring

More information

Hitachi NAS Platform Driver for OpenStack (Cinder)

Hitachi NAS Platform Driver for OpenStack (Cinder) Hitachi NAS Platform Driver for OpenStack (Cinder) Installation Guide MK-92ADPTR092-00 Contents Supported operations... 2 The NFS and iscsi drivers support these operations:... 2 Service labels... 2 HNAS

More information

Implementation Guide. By Jeff Chen and Leo Nguyen. Month Year

Implementation Guide. By Jeff Chen and Leo Nguyen. Month Year 1 Deploy Hitachi Unified Compute Platform Select for Microsoft Exchange Server 2010 with Hitachi Compute Blade 2000 on Hitachi Adaptable Modular Storage 2300 Implementation Guide By Jeff Chen and Leo Nguyen

More information

Hands-On Lab. Windows Azure Virtual Machine Roles. Lab version: Last updated: 12/14/2010. Page 1

Hands-On Lab. Windows Azure Virtual Machine Roles. Lab version: Last updated: 12/14/2010. Page 1 Hands-On Lab Windows Azure Virtual Machine Roles Lab version: 2.0.0 Last updated: 12/14/2010 Page 1 CONTENTS OVERVIEW... 3 EXERCISE 1: CREATING AND DEPLOYING A VIRTUAL MACHINE ROLE IN WINDOWS AZURE...

More information

Hitachi Storage Command Portal Installation and Configuration Guide

Hitachi Storage Command Portal Installation and Configuration Guide Hitachi Storage Command Portal Installation and Configuration Guide FASTFIND LINKS Document Organization Product Version Getting Help Table of Contents # MK-98HSCP002-04 Copyright 2010 Hitachi Data Systems

More information

Hitachi Unified Compute Platform Pro for VMware vsphere

Hitachi Unified Compute Platform Pro for VMware vsphere SOLUTION PROFILE Hitachi Unified Compute Platform Pro for VMware vsphere Accelerate Your Business-Critical Workloads to the Next-Generation Converged Infrastructure Relentless trends of increasing data

More information

Hitachi File Services Manager Release Notes

Hitachi File Services Manager Release Notes Hitachi File Services Manager 6.1.2-00 Release Notes Copyright 2011, 2016, Hitachi, Ltd., Hitachi Data Systems Corporation, ALL RIGHTS RESERVED Notice: No part of this publication may be reproduced or

More information

Hitachi Content Platform Failover Processing Using Storage Adapter for Symantec Enterprise Vault

Hitachi Content Platform Failover Processing Using Storage Adapter for Symantec Enterprise Vault Hitachi Content Platform Failover Processing Using Storage Adapter for Symantec Enterprise Vault Best Practices Guide By Dave Brandman October 24, 2012 Feedback Hitachi Data Systems welcomes your feedback.

More information

Hitachi NAS Platform F1000 Series

Hitachi NAS Platform F1000 Series Hitachi NAS Platform F1000 Series Backup Restore Features Supplement for Hitachi Data Protection Suite Product Version Getting Help Contents MK-92NAS069-07 2012-2015 Hitachi, Ltd. All rights reserved.

More information

NetBackup 7.6 Replication Director A Hands On Experience

NetBackup 7.6 Replication Director A Hands On Experience NetBackup 7.6 Replication Director A Hands On Experience Description Through this hands on lab you can test drive Replication Director and experience for yourself this easy to use, powerful feature. Once

More information

LepideAuditor. Installation and Configuration Guide

LepideAuditor. Installation and Configuration Guide Installation and Configuration Guide Table of Contents 1. Introduction... 6 2. Requirements and Prerequisites... 6 2.1 System Requirements... 6 2.2 Supported Servers for Auditing... 7 2.3 Prerequisites

More information

Hitachi Command Suite. Command Director. CLI Reference Guide MK-90HCMD004-04

Hitachi Command Suite. Command Director. CLI Reference Guide MK-90HCMD004-04 Hitachi Command Suite Command Director CLI Reference Guide MK-90HCMD004-04 2014 Hitachi. Ltd. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,

More information

KYOCERA Net Admin User Guide

KYOCERA Net Admin User Guide KYOCERA Net Admin User Guide Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable

More information

LepideAuditor for File Server. Installation and Configuration Guide

LepideAuditor for File Server. Installation and Configuration Guide LepideAuditor for File Server Installation and Configuration Guide Table of Contents 1. Introduction... 4 2. Requirements and Prerequisites... 4 2.1 Basic System Requirements... 4 2.2 Supported Servers

More information

DIGIOP ELEMENTS V8.7 NVR Software-only Installation Guide

DIGIOP ELEMENTS V8.7 NVR Software-only Installation Guide DIGIOP ELEMENTS V8.7 NVR Software-only Installation Guide About this installation guide Use this document as a guide to install your DIGIOP ELEMENTS NVR software system. It includes procedures to install

More information

Using the VMware vrealize Orchestrator Client

Using the VMware vrealize Orchestrator Client Using the VMware vrealize Orchestrator Client vrealize Orchestrator 7.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by

More information

OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3.1

OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3.1 OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3.1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use

More information

SM L04 Veritas Operations Manager Advanced 4.0 RU1: Optimize Your Heterogeneous Storage Environment Hands-On Lab Description

SM L04 Veritas Operations Manager Advanced 4.0 RU1: Optimize Your Heterogeneous Storage Environment Hands-On Lab Description SM L04 Veritas Operations Manager Advanced 4.0 RU1: Optimize Your Heterogeneous Storage Environment Hands-On Lab Description Veritas Operations Manager Advanced (VOM Advanced) is a comprehensive discovery

More information

Anchor User Guide. Presented by: Last Revised: August 07, 2017

Anchor User Guide. Presented by: Last Revised: August 07, 2017 Anchor User Guide Presented by: Last Revised: August 07, 2017 TABLE OF CONTENTS GETTING STARTED... 1 How to Log In to the Web Portal... 1 How to Manage Account Settings... 2 How to Configure Two-Step Authentication...

More information

Performer to DP2 Hot Folder Reference Manual Rev There is only one file involved with installing the Performer to DP2 Hot Folder.

Performer to DP2 Hot Folder Reference Manual Rev There is only one file involved with installing the Performer to DP2 Hot Folder. Performer to DP2 Hot Folder Reference Manual Rev. 07.11.05 Install Files: There is only one file involved with installing the Performer to DP2 Hot Folder. The installer file is named PP2DP2_1.x.x.EXE.

More information

Online Help StruxureWare Data Center Expert

Online Help StruxureWare Data Center Expert Online Help StruxureWare Data Center Expert Version 7.2.7 What's New in StruxureWare Data Center Expert 7.2.x Learn more about the new features available in the StruxureWare Data Center Expert 7.2.x release.

More information

CLIQ Web Manager. User Manual. The global leader in door opening solutions V 6.1

CLIQ Web Manager. User Manual. The global leader in door opening solutions V 6.1 CLIQ Web Manager User Manual V 6.1 The global leader in door opening solutions Program version: 6.1 Document number: ST-003478 Date published: 2016-03-31 Language: en-gb Table of contents 1 Overview...9

More information

Dell Storage Compellent Integration Tools for VMware

Dell Storage Compellent Integration Tools for VMware Dell Storage Compellent Integration Tools for VMware Administrator s Guide Version 3.1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your

More information

Personal vdisk Implementation Guide. Worldwide Technical Readiness

Personal vdisk Implementation Guide. Worldwide Technical Readiness Worldwide Technical Readiness Table of Contents Table of Contents... 2 Overview... 3 Implementation Guide... 4 Pre-requisites... 5 Preparing PVS vdisk to be used with Personal vdisk... 6 Creating a Desktop

More information

Secret Server Demo Outline

Secret Server Demo Outline Secret Server is a feature rich product that can be introduced to your prospects in many different ways. Below is a generic outline of several of the most important features that should be covered during

More information

vrealize Operations Manager Customization and Administration Guide vrealize Operations Manager 6.4

vrealize Operations Manager Customization and Administration Guide vrealize Operations Manager 6.4 vrealize Operations Manager Customization and Administration Guide vrealize Operations Manager 6.4 vrealize Operations Manager Customization and Administration Guide You can find the most up-to-date technical

More information

Cisco Unified Serviceability

Cisco Unified Serviceability Cisco Unified Serviceability Introduction, page 1 Installation, page 5 Introduction This document uses the following abbreviations to identify administration differences for these Cisco products: Unified

More information

Kernel for Exchange Server. Installation and Configuration Guide

Kernel for Exchange Server. Installation and Configuration Guide Kernel for Exchange Server Installation and Configuration Guide Table of Contents Table of Contents... 2 1. Introduction... 3 2. Requirements and Prerequisites... 3 2.1 Basic System Requirements... 3 2.2

More information

Cox Business Online Backup Administrator Guide. Version 2.0

Cox Business Online Backup Administrator Guide. Version 2.0 Cox Business Online Backup Administrator Guide Version 2.0 2012 by Cox Communications. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic,

More information

Using the VMware vcenter Orchestrator Client. vrealize Orchestrator 5.5.1

Using the VMware vcenter Orchestrator Client. vrealize Orchestrator 5.5.1 Using the VMware vcenter Orchestrator Client vrealize Orchestrator 5.5.1 You can find the most up-to-date technical documentation on the VMware website at: https://docs.vmware.com/ If you have comments

More information

Use Restrictions for Hitachi Compute Blade 500 Series FASTFIND LINKS. Getting Help Contents MK-91CB

Use Restrictions for Hitachi Compute Blade 500 Series FASTFIND LINKS. Getting Help Contents MK-91CB Use Restrictions for Hitachi Compute Blade 500 Series FASTFIND LINKS Getting Help Contents MK-91CB500072-16 2010-2016 Hitachi, Ltd. All rights reserved. No part of this publication may be reproduced or

More information

Administering isupport

Administering isupport Administering isupport Tracking and Monitoring isupport Usage Agents perform tasks in the background that are an integral part of isupport functionality. See Enabling and Scheduling Agents on page 2 for

More information

Using the Prime Performance Manager Web Interface

Using the Prime Performance Manager Web Interface 3 CHAPTER Using the Prime Performance Manager Web Interface The following topics provide information about using the Cisco Prime Performance Manager web interface: Accessing the Prime Performance Manager

More information

Installation Guide Worksoft Certify

Installation Guide Worksoft Certify Installation Guide Worksoft Certify Worksoft, Inc. 15851 Dallas Parkway, Suite 855 Addison, TX 75001 www.worksoft.com 866-836-1773 Worksoft Certify Installation Guide Version 9.0.3 Copyright 2017 by Worksoft,

More information

Information management, subscription service, financial news

Information management, subscription service, financial news Storage Economics Engagement Customer Summary INDUSTRY: REGION: Information management, subscription service, financial news Americas BUSINESS SIZE: Enterprise USE CASE Executive Summary The data growth

More information

Arc Pro. Wallboard. User Guide. Version 6.1.0

Arc Pro. Wallboard. User Guide. Version 6.1.0 Arc Pro Wallboard User Guide Version 6.1.0 2003-2014 Arc Solutions (International) Ltd. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make

More information

Enterprise 3.4 RC1. Managing Alfresco Content from within Microsoft Office

Enterprise 3.4 RC1. Managing Alfresco Content from within Microsoft Office Enterprise 3.4 RC1 Managing Alfresco Content from within Microsoft Office Contents Copyright... 3 Typographic conventions...4 Introduction... 5 System requirements and prerequisites...5 Get started...6

More information

Workspace Administrator Help File

Workspace Administrator Help File Workspace Administrator Help File Table of Contents HotDocs Workspace Help File... 1 Getting Started with Workspace... 3 What is HotDocs Workspace?... 3 Getting Started with Workspace... 3 To access Workspace...

More information

Quick Start Guide TABLE OF CONTENTS COMMCELL ARCHITECTURE OVERVIEW COMMCELL SOFTWARE DEPLOYMENT INSTALL THE COMMSERVE SOFTWARE

Quick Start Guide TABLE OF CONTENTS COMMCELL ARCHITECTURE OVERVIEW COMMCELL SOFTWARE DEPLOYMENT INSTALL THE COMMSERVE SOFTWARE Page 1 of 35 Quick Start Guide TABLE OF CONTENTS This Quick Start Guide is designed to help you install and use a CommCell configuration to which you can later add other components. COMMCELL ARCHITECTURE

More information

Creating Resources on the ZFS Storage Appliance

Creating Resources on the ZFS Storage Appliance Oracle Enterprise Manager Ops Center Creating Non-Global Zones Using a SAN Storage Library 12c Release 3 (12.3.0.0.0) E65613-01 October 2015 This guide provides an end-to-end example for how to use Oracle

More information

SolarWinds. Migrating SolarWinds NPM Technical Reference

SolarWinds. Migrating SolarWinds NPM Technical Reference SolarWinds Migrating SolarWinds NPM Technical Reference Copyright 1995-2015 SolarWinds Worldwide, LLC. All rights reserved worldwide. No part of this document may be reproduced by any means nor modified,

More information

Deploying a System Center 2012 R2 Configuration Manager Hierarchy

Deploying a System Center 2012 R2 Configuration Manager Hierarchy Deploying a System Center 2012 R2 Configuration Manager Hierarchy This document is for informational purposes only. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, AS TO THE INFORMATION

More information

Avaya Event Processor Release 2.2 Operations, Administration, and Maintenance Interface

Avaya Event Processor Release 2.2 Operations, Administration, and Maintenance Interface Avaya Event Processor Release 2.2 Operations, Administration, and Maintenance Interface Document ID: 13-603114 Release 2.2 July 2008 Issue No.1 2008 Avaya Inc. All Rights Reserved. Notice While reasonable

More information

Web Console Setup & User Guide. Version 7.1

Web Console Setup & User Guide. Version 7.1 Web Console Setup & User Guide Version 7.1 1 Contents Page Number Chapter 1 - Installation and Access 3 Server Setup Client Setup Windows Client Setup Mac Client Setup Linux Client Setup Interoperation

More information

Hitachi Hyper Scale-Out Platform (HSP) Hortonworks Ambari VM Quick Reference Guide

Hitachi Hyper Scale-Out Platform (HSP) Hortonworks Ambari VM Quick Reference Guide Hitachi Hyper Scale-Out Platform (HSP) MK-95HSP013-03 14 October 2016 2016 Hitachi, Ltd. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic

More information

Performance Evaluation Using Network File System (NFS) v3 Protocol. Hitachi Data Systems

Performance Evaluation Using Network File System (NFS) v3 Protocol. Hitachi Data Systems P E R F O R M A N C E B R I E F Hitachi NAS Platform 3080 Cluster Using the Hitachi Adaptable Modular Aciduisismodo Dolore Eolore Storage 2500: SPEC SFS2008 Dionseq Uatummy Odolorem Vel Performance Analysis

More information

HCP Streamer Adapter for Veritas Enterprise Vault

HCP Streamer Adapter for Veritas Enterprise Vault RELEASE NOTES HCP Streamer Adapter for Veritas Enterprise Vault Release Notes v1.4.2 By Hitachi Data Systems February 2017 RN-92ADPTR035-04 P a g e 2 Contents About This Document3 Intended Audience...

More information

Vendor: Hitachi. Exam Code: HH Exam Name: Hitachi Data Systems Storage Fondations. Version: Demo

Vendor: Hitachi. Exam Code: HH Exam Name: Hitachi Data Systems Storage Fondations. Version: Demo Vendor: Hitachi Exam Code: HH0-130 Exam Name: Hitachi Data Systems Storage Fondations Version: Demo QUESTION: 1 A drive within a HUS system reaches its read error threshold. What will happen to the data

More information

Data Protection Guide

Data Protection Guide SnapCenter Software 4.0 Data Protection Guide For Oracle Databases May 2018 215-12930_D0 doccomments@netapp.com Table of Contents 3 Contents Deciding whether to read the SnapCenter Data Protection Guide

More information

Hitachi Data Systems. Hitachi Dynamic Provisioning with HNAS v12.1 Frequently Asked Questions MK- 92HNAS057-02

Hitachi Data Systems. Hitachi Dynamic Provisioning with HNAS v12.1 Frequently Asked Questions MK- 92HNAS057-02 Hitachi Data Systems Hitachi Dynamic Provisioning with HNAS v12.1 Frequently Asked Questions MK- 92HNAS057-02 2011-2015 Hitachi, Ltd. All rights reserved. No part of this publication may be reproduced

More information

Enterprise Vault.cloud CloudLink Google Account Synchronization Guide. CloudLink to 4.0.3

Enterprise Vault.cloud CloudLink Google Account Synchronization Guide. CloudLink to 4.0.3 Enterprise Vault.cloud CloudLink Google Account Synchronization Guide CloudLink 4.0.1 to 4.0.3 Enterprise Vault.cloud: CloudLink Google Account Synchronization Guide Last updated: 2018-06-08. Legal Notice

More information

LiveNX Upgrade Guide from v5.2.0 to v5.2.1

LiveNX Upgrade Guide from v5.2.0 to v5.2.1 LIVEACTION, INC. LiveNX Upgrade Guide from v5.2.0 to v5.2.1 UPGRADE LiveAction, Inc. 3500 Copyright WEST BAYSHORE 2016 LiveAction, ROAD Inc. All rights reserved. LiveAction, LiveNX, LiveUX, the LiveAction

More information

License Server Administrator Guide How to configure and manage a license server for sharable licenses

License Server Administrator Guide How to configure and manage a license server for sharable licenses ! License Server Administrator Guide How to configure and manage a license server for sharable licenses Copyright 2015 PACE Anti-Piracy, Inc. All rights reserved Version 07/07/2015 ! Table of Contents

More information

Smart Install in LMS CHAPTER

Smart Install in LMS CHAPTER CHAPTER 6 Smart Install (SI) is a plug-and-play configuration and image management feature that provides zero-touch deployment for new switches. You can configure SI on a switch which will then be the

More information

Data Protection Guide

Data Protection Guide SnapCenter Software 4.0 Data Protection Guide For Custom Plug-ins March 2018 215-12932_C0 doccomments@netapp.com Table of Contents 3 Contents Deciding on whether to read the SnapCenter Data Protection

More information

HP Data Protector Media Operations 6.11

HP Data Protector Media Operations 6.11 HP Data Protector Media Operations 6.11 Getting started This guide describes installing, starting and configuring Media Operations. Copyright 2009 Hewlett-Packard Development Company, L.P. Part number:

More information

GRS Enterprise Synchronization Tool

GRS Enterprise Synchronization Tool GRS Enterprise Synchronization Tool Last Revised: Thursday, April 05, 2018 Page i TABLE OF CONTENTS Anchor End User Guide... Error! Bookmark not defined. Last Revised: Monday, March 12, 2018... 1 Table

More information

Configuring ApplicationHA in VMware SRM 5.1 environment

Configuring ApplicationHA in VMware SRM 5.1 environment Configuring ApplicationHA in VMware SRM 5.1 environment Windows Server 2003 and 2003 R2, Windows Server 2008 and 2008 R2 6.0 September 2013 Contents Chapter 1 About the ApplicationHA support for VMware

More information

Hitachi Storage Management Pack for VMware vrealize Operations Dashboard User s Guide

Hitachi Storage Management Pack for VMware vrealize Operations Dashboard User s Guide Hitachi Storage Management Pack for VMware vrealize Operations Dashboard User s Guide FASTFIND LINKS Document Organization Software Version Getting Help Contents MK-92ADPTR082-04 All Rights Reserved, Copyright

More information

Provisioning Lumeta SPECTRE via AWS Sign in to the Amazon Web Services console at

Provisioning Lumeta SPECTRE via AWS Sign in to the Amazon Web Services console at Thank you for choosing Lumeta SPECTRE! This document provides the essentials you ll need to make sense of your network in real time from the Amazon Web Services (AWS) cloud, including: 1) How to instantiate

More information

Dell Storage vsphere Web Client Plugin. Version 4.0 Administrator s Guide

Dell Storage vsphere Web Client Plugin. Version 4.0 Administrator s Guide Dell Storage vsphere Web Client Plugin Version 4.0 Administrator s Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION:

More information

ER/Studio Business Architect

ER/Studio Business Architect Product Documentation ER/Studio Business Architect Installation Guide 2nd Edition Version 1.6.1 Published August 2010 2010 Embarcadero Technologies, Inc. Embarcadero, the Embarcadero Technologies logos,

More information

DIGIOP ELEMENTS V8.1 Software-only Installation Guide

DIGIOP ELEMENTS V8.1 Software-only Installation Guide DIGIOP ELEMENTS V8.1 Software-only Installation Guide About this installation guide Use this document as a guide to install your DIGIOP ELEMENTS software system. It includes procedures to install your

More information

Hitachi Data Ingestor

Hitachi Data Ingestor Hitachi Data Ingestor Backup Restore Features Supplement for IBM Tivoli Storage Manager Product Version Getting Help Contents MK-90HDICOM010-02 2010-2014 Hitachi, Ltd. All rights reserved. No part of this

More information

EA/Studio Installation Guide

EA/Studio Installation Guide EA/Studio 1.5.2 Installation Guide Copyright 1994-2008 Embarcadero Technologies, Inc. Embarcadero Technologies, Inc. 100 California Street, 12th Floor San Francisco, CA 94111 U.S.A. All rights reserved.

More information