Virtual Hometerm Subsystem (VHS) Manual

Size: px
Start display at page:

Download "Virtual Hometerm Subsystem (VHS) Manual"

Transcription

1 Virtual Hometerm Subsystem (VHS) Manual Abstract This manual describes the Compaq NonStop Virtual Hometerm Subsystem (VHS). VHS acts as a virtual home terminal for applications by emulating a 6530 terminal. Product Version Not applicable. Supported Releases This manual supports G06.15 and D48.03 and all subsequent Gxx.xx and Dxx.xx releases until otherwise indicated in a new edition. Part Number Published February 2002

2 Document History Part Number Product Version Published NA February 2002

3 Virtual Hometerm Subsystem (VHS) Manual Glossary Index Examples Figures Tables What s New in This Manual xiii Manual Information xiii What s New and Changed xiii About This Manual xv Audience xv Prerequisite Products and Manuals Related Products and Manuals xv Manual Organization xvi Your Comments Invited xvii Notation Conventions xvii xv 1. Introduction to VHS Benefits of VHS 1-1 VHS Architecture 1-2 VHS and Management Applications 1-2 VHS Subsystem 1-2 VHS and the Application Environment 1-3 VHS Components 1-3 VHS Browser 1-5 Using Multiple VHS Processes 1-7 VHS on a Node 1-8 Setting Up VHS Environments 1-9 VHS on a Network 1-10 Centralizing VHS EMS Events Installing VHS VHS System Requirements 2-2 VHS Disk Space Requirements 2-2 Installation Summary 2-2 Creating the VHS Installation Subvolume (ISV) 2-3 Installing the VHS Subsystem Components 2-4 Installing VHS for the First Time 2-5 Compaq Computer Corporation i

4 Contents 2. Installing VHS (continued) 2. Installing VHS (continued) Updating VHS 2-5 Installing the VHS and VHSCI Programs and the VHS GUI Agent Facility 2-7 VHS, VHSCI and VHS GUI Agent Installation Procedure 2-12 Installing the VHS Browser in ViewPoint 2-14 VHS Browser Restrictions 2-17 VHS Browser Installation in ViewPoint Procedure 2-17 ViewPoint Installation Considerations 2-19 Installing the VHS Browser as a Stand-Alone Pathway System 2-23 VHS Browser Restrictions 2-26 VHS Browser Installation as a Stand-Alone Pathway System Procedure 2-26 Pathway Installation Considerations 2-28 Modifying the VHS Configuration Files 2-29 VHSSTART File 2-30 VHSINSP File 2-33 VHSCSTM File 2-33 VHSBCONF File 2-33 VHSGCONF File 2-35 VHS Run-Time Options 2-36 VHS ASSIGNs 2-36 VHS Parameters 2-37 VHS DEFINE Parameter Using VHS Before Using VHS 3-1 Starting VHS 3-1 Sample VHSSTART File 3-3 Guidelines for Running VHS 3-4 VHS Run Syntax 3-4 Specifying VHS as the Home Terminal of Applications 3-7 Non-Pathway Applications 3-7 Pathway Application Example Pathway Application Example How VHS Manages Messages 3-9 OPEN Message Processing 3-10 Display Message Processing 3-10 Inspect Prompt Processing 3-10 Debug Prompt Processing 3-11 Application Prompt Processing 3-11 ii

5 Contents 3. Using VHS (continued) 3. Using VHS (continued) Reply Message Processing 3-11 Configuring VHS Inspect Processing 3-12 VHS AUTOMATIC-INSPECT-PROCESSING Parameter 3-12 Inspect Processing Considerations 3-12 VHS Inspect File 3-12 Understanding the VHS Log Files 3-16 PRIMARY-LOGFILE-PURGE Parameter 3-16 Secondary Log Destination 3-17 Stopping VHS 3-17 Using VHS With a ViewPoint Filter Using the VHS Browser Accessing the VHS Browser 4-1 VHS Installed in ViewPoint 4-1 VHS Installed as a Stand-Alone Pathway System 4-2 High PIN Support 4-3 Exiting the VHS Browser 4-3 VHS Installed in ViewPoint 4-3 VHS Installed as a Stand-Alone Pathway System 4-4 VHS Screen Navigation 4-5 VHS Screen Format 4-5 Help Screens 4-6 Paging Through Help 4-7 Log Browser Screen 4-8 Changing Search Criteria 4-8 Getting Environment Detailed Information 4-8 Paging Through the Log File 4-8 Log Browser Screen Field Descriptions 4-11 Log Browser Screen Function Keys 4-12 Search Text Field 4-12 Date and Object-Name Display 4-13 Prompt Browser Screen 4-13 Changing Search Criteria 4-13 Getting Environment Detailed Information 4-13 Going to a Specific Page 4-14 Getting Detailed Prompt Information 4-14 Replying to a Prompt 4-14 Prompt Browser Screen Field Descriptions 4-15 iii

6 Contents 4. Using the VHS Browser (continued) 4. Using the VHS Browser (continued) Prompt Browser Screen Function Keys 4-16 Prompt Detail Screen 4-16 Replying to a Prompt 4-16 Prompt Detail Screen Field Descriptions 4-17 Prompt Detail Function Key Descriptions 4-18 VHS Profile Screen 4-18 Switching Systems 4-21 Switching VHS Browser Servers 4-21 Switching PATHMONs 4-21 Switching Environments 4-21 Changing the Screens Automatic Update 4-22 VHS Profile Screen Field Descriptions 4-22 VHS Profile Screen Function Keys 4-23 Environment Detailed Screen 4-23 Getting Environment Detailed Information 4-24 Setting the Current Environment 4-24 Paging Through the Existing Environments 4-24 Environment Detailed Screen Field Descriptions 4-25 Environment Detailed Screen Function Keys 4-26 Printing a Screen Using VHSCI Getting Started 5-1 Running VHSCI 5-1 Exiting VHSCI 5-3 Entering VHSCI Commands 5-4 Configuring Function Keys 5-5 Setting Detail Error Display 5-7 Setting the Output Destination 5-8 Editing the VHSCI Custom Configuration File 5-8 Using Online Help 5-9 Getting Statistics 5-15 Getting Status Information 5-15 Listing All Current Openers 5-16 Getting Information About and Modifying VHS Parameters 5-17 Getting Information About the VHS Parameters 5-17 Modifying a VHS Parameter 5-18 Getting Information About and Modifying Log Destinations 5-19 iv

7 Contents 5. Using VHSCI (continued) 5. Using VHSCI (continued) Getting Information About the Log Configuration 5-19 Adding a Secondary Log 5-20 Modifying a Secondary Log 5-21 Deleting a Secondary Log 5-22 Switching the Backup CPU to the Primary CPU 5-23 Getting Information About a VHS Environment Command Components Objects and Object Lists 6-1 Object-Spec Variable 6-1 Attributes and Attribute Values 6-2 Attribute-Spec Variable 6-2 Strings, Integers, and Time Values 6-2 Char Variable 6-3 Integer Variable 6-3 Time Variable 6-4 Disk File Names 6-4 File Specification Command Descriptions Exclamation Point (!) Command 7-2 Question Mark (?) Command 7-3 ALIAS Command 7-4 ALLOW Command 7-5 ALTER Command 7-7 ASSIGN Command 7-13 ASSUME Command 7-16 CLEAR Command 7-18 COMMENT Command 7-19 CONFIRM Command 7-19 CPUS Command 7-20 DELAY Command 7-22 DETAIL ERROR Command 7-23 ENV Command 7-23 EXIT Command 7-24 FC Command 7-24 HELP Command 7-25 HISTORY Command 7-27 v

8 Contents 7. Command Descriptions (continued) 7. Command Descriptions (continued) INFO Command 7-27 LISTOPENS Command 7-32 LOG Command 7-34 OBEY Command 7-34 OUT Command 7-36 PAGESIZE Command 7-36 PARAM Command 7-37 PAUSE Command 7-38 REPEAT Command 7-38 RUN Command 7-39 SETPROMPT Command 7-40 STATS Command 7-42 STATUS Command 7-44 SYSTEM Command 7-49 TIMEOUT Command 7-50 VERSION Command 7-51 VOLUME Command The VHS GUI Introduction to the VHS GUI 8-1 VHS GUI Overview 8-1 Host Installation Requirements 8-1 VHS GUI Architecture 8-2 Windows NT Workstation 8-2 Compaq Server - Central Node 8-3 Compaq Server - Remote Node 8-3 VHS GUI Installation 8-4 Starting the VHS GUI 8-5 The New VHS Parameters 8-5 EMS Event Messages Generated by VHS 8-6 Use of Alternate EMS Collectors 8-6 Restricting VHS GUI User Capability 8-7 Broadcasting 8-9 Single Node Recommended Setup 8-9 Multiple Node Recommended Setup 8-9 vi

9 Contents A. VHS Files A. VHS Files VHSCSTM File A-1 VHSSTART File A-2 VHSBCONF File A-3 B. VHS Limits C. VHS Event Messages VHS Event Messages C-1 VHS Application-Related Events C-1 VHS Internal Events C-1 VHS Browser Events C-3 VHS Token List C-3 SPI Standard Definitions C-3 EMS Standard Definitions C-5 VHS Definitions C-6 VHS Token Definitions C-6 VHS Value Definitions C-7 Private Token and Field Types C-7 Predefined Token and Field Values C-7 Simple Tokens C-8 Description of VHS Event Messages C-8 Unconditional and Conditional Tokens C-8 1: ZVHS-EVT-INSPECT-SAVE C-9 2: ZVHS-EVT-INSPECT-NOSAVE C-11 3: ZVHS-EVT-INSPECT-OBEY C-14 4: ZVHS-EVT-INSPECT-SCOBOL C-16 5: ZVHS-EVT-DEBUG-ERROR C-19 6: ZVHS-EVT-DISPLAY C-21 7: ZVHS-EVT-PROMPT C-24 8: ZVHS-EVT-PROMPT-REPLY C : ZVHS-EVT-VHS-STARTED C : ZVHS-EVT-BACKUP-CREATED C : ZVHS-EVT-PRIMARY-LOG-CREATED C : ZVHS-EVT-PRIMARY-LOG-ROLLOVER C : ZVHS-EVT-CREATE-BACKUP-FAILED C : ZVHS-EVT-BACKUP-STOPPED C : ZVHS-EVT-BACKUP-DELETED C : ZVHS-EVT-BACKUP-ABENDED C-42 vii

10 Contents C. VHS Event Messages (continued) C. VHS Event Messages (continued) 108: ZVHS-EVT-TAKEOVER C : ZVHS-EVT-CHECKPOINT-FAILED C : ZVHS-EVT-CHECKOPEN-FAILED C : ZVHS-EVT-PRIMARY-LOG-IO-ERROR C : ZVHS-EVT-PROCESS-DELETED C : ZVHS-EVT-ALTERNATE-CREATED C : ZVHS-EVT-PROMPT-IO-ERROR C : ZVHS-EVT-PROMPT-FILE-CREATED C : ZVHS-EVT-PROMPT-ALT-CREATED C : ZVHS-EVT-CLEAN-PROMPT-FILE C : ZVHS-EVT-REMOVE-PROMPT C : ZVHS-EVT-BAD-REPLY C : ZVHS-EVT-CONFIG-IO-ERROR C : ZVHS-EVT-INVALID-LINE-FORMAT C : ZVHS-EVT-COLLECTOR ERROR C : ZVHS-EVT-INSP-UNKNOWN-LANGUAGE C : ZVHS-EVT-INSP-INVALID-FILENAME C : ZVHS-EVT-INSP-INVALID-PROCESS C : ZVHS-EVT-INSP-DUPLICATE-SEC C : ZVHS-EVT-INSP-TABLE-FULL-DATA C : ZVHS-EVT-INSP-TABLE-FULL-SEC C : ZVHS-EVT-INSP-PROCESSING-STOP C : ZVHS-EVT-INSP-TOO-MUCH-PROMPT C : ZVHS-EVT-OPEN-TABLE-THRESHOLD C : ZVHS-EVT-INSP-INVALID-PARAM C : ZVHS-EVT-INSP-LOAD-FILE-ERR C : ZVHS-EVT-OPENEDIT-ERROR C : ZVHS-EVT-READEDIT-ERROR C : ZVHS-EVT-SET-DEFINE C : ZVHS-EVT-INSP-RELOAD-FILE C : ZVHS-EVT-PROMPT-CANCEL C : ZVHS-EVT-PROMPT-NOT-UNIQUE C : ZVHS-EVT-INSP-INVALID-KEYWORD C : ZVHS-EVT-INSP-LINE-TOO-LONG C : ZVHS-EVT-INSP-LOAD-FILE C : ZVHS-EVT-INSP-RELOAD-FILE-ERR C : ZVHS-EVT-INSP-INVALID-REMOTE C : ZVHS-EVT-INSP-FILE-NOT-EXIST C-106 viii

11 Contents C. VHS Event Messages (continued) C. VHS Event Messages (continued) 147: ZVHS-EVT-INSP-INVALID-TEXT C : ZVHS-EVT-CLEAN-TABLE C : ZVHS-EVT-INSPECT-EXTENDED C : ZVHS-EVT-INSPECT-APPL-EXT C : ZVHS-EVT-INSPECT-SCOBOL-EXT C : ZVHS-EVT-DEBUG-EXTENDED C : ZVHS-EVT-PROMPT-RESEND C : ZVHS-EVT-INTERNAL-ERROR C-127 D. VHSCI Command Summary E. VHS Process Messages F. VHS Browser Messages G. VHSCI Messages Message Descriptions G-1 Interprocess Communication Messages G-22 H. VHS DDL Files VHS Primary Log File H-1 Log File Format H-2 File and Spooler H-2 I. ViewPoint Event Filter Glossary Index Examples Example 2-1. VHS Custom Startup File 2-31 Example 2-2. VHS Browser Environment Configuration File 2-34 Example 2-3. VHS Browser Customized Environment Configuration File 2-35 Example H-1. Log Messages H-3 ix

12 Contents Figures Figures Figure 1-1. VHS Architecture 1-2 Figure 1-2. VHS Browser Screens 1-6 Figure 1-3. Multiple VHS Processes 1-7 Figure 1-4. VHS On One Node With A Single Environment 1-8 Figure 1-5. Multiple VHS Environments on One Node 1-9 Figure 1-6. VHS on a Network 1-11 Figure 1-7. Centralized VHS EMS Events 1-12 Figure 2-1. VHS Installation Flow Chart 2-3 Figure 2-2. Using the Installation Program 2-7 Figure 2-3. Installing the VHS Browser in ViewPoint 2-14 Figure 2-4. Installing the VHS Browser in Pathway 2-23 Figure 2-5. Modifying the VHS Configuration Files 2-30 Figure 3-1. VHS Log Files 3-17 Figure 4-1. Screen Navigation Map 4-5 Figure 4-2. VHS Screen Format 4-6 Figure 4-3. Log Browser Help Screen 4-7 Figure 4-4. Log Browser Screen: SHOW-DATE and SHOW-OBJECT-NAME Set to Figure 4-5. Log Browser Screen: SHOW-DATE Set to 1 and SHOW-OBJECT- NAME Set to Figure 4-6. Log Browser Screen: SHOW-DATE Set to 0 and SHOW-OBJECT- NAME Set to Figure 4-7. Log Browser Screen: SHOW-DATE and SHOW-OBJECT-NAME Set to Figure 4-8. Prompt Browser Screen 4-15 Figure 4-9. Prompt Detail Screen: SHOW-DATE Set to Figure Prompt Detail Screen: SHOW-DATE Set to Figure VHS Profile Screen 4-19 Figure VHS Profile Screen 4-20 Figure Environment Detailed Screen 4-24 Figure 8-1. VHS GUI Architecture 8-2 x

13 Contents Tables Tables Table 2-1. NonStop VHS Installation Subvolume (ISV) File Listing 2-4 Table 2-2. INSTVHS Definition File Name Used by Each INSTVHS Option 2-6 Table 2-3. VHS and VHSCI Installation Parameter Values 2-8 Table 2-4. VHS Browser ViewPoint Installation Parameter Values 2-15 Table 2-5. VHS Browser Installation Parameter Values for a Stand-Alone Pathway System 2-23 Table 2-6. NonStop VHS Browser Pathway Configuration and Management Files 2-25 Table 2-7. VHS ASSIGNs 2-36 Table 2-8. VHS Parameters 2-37 Table 2-9. VHS DEFINE 2-38 Table 4-1. VHS Field Descriptions 4-6 Table 4-2. Log Browser Screen Field Descriptions 4-11 Table 4-3. Log Browser Screen Function Keys 4-12 Table 4-4. Prompt Browser Screen Field Descriptions 4-15 Table 4-5. Prompt Browser Screen Function Keys 4-16 Table 4-6. Prompt Detail Screen Field Descriptions 4-18 Table 4-7. Prompt Detail Screen Function Keys 4-18 Table 4-8. VHS Profile Screen Field Descriptions 4-22 Table 4-9. VHS Profile Screen Function Keys 4-23 Table Environment Detailed Screen Field Descriptions 4-25 Table Environment Detailed Screen Function Keys 4-26 Table 7-1. VHSCI Commands Overview 7-1 Table C-1. SPI Standard Definitions Used by VHS C-3 Table C-2. EMS Standard Definitions Used by VHS C-5 Table C-3. VHS Token Definitions (Simple Tokens) C-6 Table C-4. VHS Value Definitions C-7 Table H-1. VHS Primary Log File Record Definition (Primary File) H-1 Table H-2. VHS Primary Log File Record Definition (Alternate Key File) H-1 xi

14 Contents xii

15 What s New in This Manual Manual Information Abstract Virtual Hometerm Subsystem (VHS) Manual This manual describes the Compaq NonStop Virtual Hometerm Subsystem (VHS). VHS acts as a virtual home terminal for applications by emulating a 6530 terminal. Product Version Not applicable. Supported Releases This manual supports G06.15 and D48.03 and all subsequent Gxx.xx and Dxx.xx releases until otherwise indicated in a new edition. Part Number Published February 2002 Document History Part Number Product Version Published NA February 2002 What s New and Changed This manual has been updated as follows: The environment-detail screen has a new function: F5-Switch. This function enables you to switch to and view another set of available log files. You can now enable VHS, VHSCI, VHS Browser and VHS Browser-help to run at high PIN. VHS cannot be opened by remote processes. VHS can only be opened by local processes. Minor editorial corrections. xiii

16 What s New in This Manual What s New and Changed xiv

17 About This Manual This manual describes the NonStop Virtual Hometerm Subsystem (VHS). VHS acts as a virtual home terminal for applications. It receives messages normally sent to a home terminal, such as displays, prompts, COBOL run-time library errors, and Inspect or Debug prompts. VHS can be used with an operator console program (such as ViewPoint, IOC, or NonStop NET/MASTER) to highlight critical or action event messages that affect system or application performance. Audience This manual is intended for personnel responsible for the configuration and management of systems and applications. Prerequisite Products and Manuals Before using this manual, you should be familiar with the Compaq NonStop Kernel operating system and the Event Management Service (EMS). VHS works with several other Compaq products. For more information about these products, see the appropriate product manuals: Related Products Distributed Systems Management Event Management Service (EMS) Pathway COBOL85 Debug Inspect Product Manuals Related Products and Manuals Introduction to Distributed Systems Management (DSM) SPI Programming Manual EMS Manual NonStop TS/MP System Management Manual Pathway/TS SCREEN COBOL Reference Manual COBOL85 Manual Debug Manual Inspect Manual You can use other Compaq products to manage system and user messages. VHS operates independently of these tools, but is designed to work with and enhance each of the following tools. xv

18 About This Manual Manual Organization For more information about these products, see the appropriate product manuals: Related Products ViewPoint Event Management Service (EMS) Analyzer NonStop NET/MASTER Product Manuals ViewPoint Manual Event Management Service (EMS) Analyzer User s Guide and Reference Manual NonStop NET/MASTER documentation Manual Organization This manual consists of the following sections and appendixes: Section Title Description 1 Introduction to VHS Provides an introduction to VHS, including a description of VHS architecture 2 Installing VHS Describes how to install VHS and its screens 3 Using VHS Describes how to run and how to use VHS 4 Using the VHS Browser Describes how to use the VHS Browser, the VHS screen facility to browse the VHS log file and the VHS prompt file 5 Using VHSCI Describes how to use the VHS conversational interface, VHSCI 6 Command Components Introduces the VHSCI command components 7 Command Descriptions Describes the VHSCI commands in detail 8 The VHS GUI Describes the VHS Graphical User Interface (GUI) architecture, features, and installation procedures. A VHS Files Lists the contents of some key VHS configuration and startup files: VHSCSTM file, a sample custom configuration file; the VHSSTART file, a sample startup file for VHS; and VHSBCONF, the VHS Browser configuration file B VHS Limits Lists VHS limits C VHS Event Messages Lists and describes the event messages generated by VHS D VHSCI Command Gives a VHSCI command summary Summary E VHS Process Messages Lists and describes the messages from the VHS Browser F VHS Browser Messages Lists and describes the messages from the VHS process G VHSCI Messages Lists and describes the messages from VHSCI xvi

19 About This Manual Your Comments Invited Section Title Description H VHS DDL Files Lists the data definition language for the VHS log file, the VHS prompt file, and VHS I ViewPoint Event Filter Displays a ViewPoint filter to highlight critical and action event messages Glossary Defines terms used in this manual Your Comments Invited After using this manual, please take a moment to send us your comments. You can do this by returning a Reader Comment Card or by sending an Internet mail message. A Reader Comment Card is located at the back of printed manuals and as a separate file on the User Documentation disc. You can either fax or mail the card to us. The fax number and mailing address are provided on the card. Also provided on the Reader Comment Card is an Internet mail address. When you send an Internet mail message to us, we immediately acknowledge receipt of your message. A detailed response to your message is sent as soon as possible. Be sure to include your name, company name, address, and phone number in your message. If your comments are specific to a particular manual, also include the part number and title of the manual. Many of the improvements you see in manuals are a result of suggestions from our customers. Please take this opportunity to help us improve future manuals. Notation Conventions General Syntax Notation The following list summarizes the notation conventions for syntax presentation in this manual. UPPERCASE LETTERS. Uppercase letters indicate keywords and reserved words; enter these items exactly as shown. Items not enclosed in brackets are required. For example: MAXATTACH lowercase italic letters. Lowercase italic letters indicate variable items that you supply. Items not enclosed in brackets are required. For example: file-name [ ] Brackets. Brackets enclose optional syntax items. For example: TERM [\system-name.]$terminal-name INT[ERRUPTS] xvii

20 About This Manual General Syntax Notation A group of items enclosed in brackets is a list from which you can choose one item or none. The items in the list may be arranged either vertically, with aligned brackets on each side of the list, or horizontally, enclosed in a pair of brackets and separated by vertical lines. For example: LIGHTS [ ON ] [ OFF ] [ SMOOTH [ num ] ] K [ X D ] address-1 { } Braces. A group of items enclosed in braces is a list from which you are required to choose one item. The items in the list may be arranged either vertically, with aligned braces on each side of the list, or horizontally, enclosed in a pair of braces and separated by vertical lines. For example: LISTOPENS PROCESS { $appl-mgr-name } { $process-name } ALLOWSU { ON OFF } Vertical Line. A vertical line separates alternatives in a horizontal list that is enclosed in brackets or braces. For example: INSPECT { OFF ON SAVEABEND } Ellipsis. An ellipsis immediately following a pair of brackets or braces indicates that you can repeat the enclosed sequence of syntax items any number of times. For example: M address-1 [, new-value ]... [ - ] { }... An ellipsis immediately following a single syntax item indicates that you can repeat that syntax item any number of times. For example: "s-char..." Punctuation. Parentheses, commas, semicolons, and other symbols not previously described must be entered as shown. For example: error := NEXTFILENAME ( file-name ) ; LISTOPENS SU $process-name.#su-name Quotation marks around a symbol such as a bracket or brace indicate the symbol is a required character that you must enter as shown. For example: "[" repetition-constant-list "]" Item Spacing. Spaces shown between items are required unless one of the items is a punctuation symbol such as a parenthesis or a comma. For example: CALL STEPMOM ( process-id ) ; xviii

21 About This Manual Notation for Messages If there is no space between two items, spaces are not permitted. In the following example, there are no spaces permitted between the period and any other items: $process-name.#su-name Line Spacing. If the syntax of a command is too long to fit on a single line, each continuation line is indented three spaces and is separated from the preceding line by a blank line. This spacing distinguishes items in a continuation line from items in a vertical list of selections. For example: ALTER [ / OUT file-spec / ] CONTROLLER [, attribute-spec ]... Notation for Messages The following list summarizes the notation conventions for the presentation of displayed messages in this manual. Nonitalic text. Nonitalic letters, numbers, and punctuation indicate text that is displayed or returned exactly as shown. For example: Backup Up. lowercase italic letters. Lowercase italic letters indicate variable items whose values are displayed or returned. For example: p-register process-name [ ] Brackets. Brackets enclose items that are sometimes, but not always, displayed. For example: Event number = number [ Subject = first-subject-value ] A group of items enclosed in brackets is a list of all possible items that can be displayed, of which one or none might actually be displayed. The items in the list might be arranged either vertically, with aligned brackets on each side of the list, or horizontally, enclosed in a pair of brackets and separated by vertical lines. For example: LDEV ldev [ CU %ccu CU %... ] UP [ (cpu,chan,%ctlr,%unit) ] { } Braces. A group of items enclosed in braces is a list of all possible items that can be displayed, of which one is actually displayed. The items in the list might be arranged either vertically, with aligned braces on each side of the list, or horizontally, enclosed in a pair of braces and separated by vertical lines. For example: LBU { X Y } POWER FAIL process-name State changed from old-objstate to objstate { Operator Request. } { Unknown. } xix

22 About This Manual Notation for Management Programming Interfaces Vertical Line. A vertical line separates alternatives in a horizontal list that is enclosed in brackets or braces. For example: Transfer status: { OK Failed } % Percent Sign. A percent sign precedes a number that is not in decimal notation. The % notation precedes an octal number. The %B notation precedes a binary number. The %H notation precedes a hexadecimal number. For example: % P=%p-register E=%e-register Notation for Management Programming Interfaces UPPERCASE LETTERS. Uppercase letters indicate names from definition files; enter these names exactly as shown. For example: ZCOM-TKN-SUBJ-SERV lowercase letters. Words in lowercase letters are words that are part of the notation, including Data Definition Language (DDL) keywords. For example: token-type xx

23 1 Introduction to VHS This manual describes the NonStop Virtual Hometerm Subsystem (VHS). VHS acts as a virtual home terminal for applications by emulating a 6530 terminal. VHS requires no changes to your application. It runs as a named process with a subtype of 30 (device emulation). VHS receives messages normally sent to the home terminal, such as displays, application prompts, COBOL run-time library errors, and Inspect or Debug prompts. VHS uses these messages to generate event messages to the EMS collector to inform operations staff of problems. You can use VHS with operator console applications, such as ViewPoint or NonStop NET/MASTER, to highlight system or application problems. Benefits of VHS VHS improves operations productivity by helping you avoid three known problems related to using dedicated physical home terminals: Inability of operations staff to find and respond to critical messages because of the large volume of routine messages. Need for constant monitoring of physical home terminals by operations staff. Loss of productivity due to a stopped terminal that is waiting for a response. VHS emulates a terminal, but does not have the disadvantages of a single, dedicated physical terminal. VHS gives you the following benefits over a physical terminal: Easy access to critical application messages Centralized message handling Freeing up of physical terminals Automated handling of Inspect or Debug prompts Improved availability of applications to end users Information retrieval that highlights the cause of a problem, expediting its resolution 1-1

24 Introduction to VHS VHS Architecture VHS Architecture Figure 1-1 shows a simplified picture of the VHS architecture. It depicts the NonStop portion only, without the Pathway environment. Figure 1-1. VHS Architecture Management VHS Applications Subsystem Application Environment $VHS Application Console Facilities VHS Inspect File VHS Prompt File VHS Primary Log File Inspect or Debug EMS Collector Automation Software Consumer Distributor EMS Log Saveabend File VST011.vsd VHS and Management Applications VHS works with management applications, such as ViewPoint and NonStop NET/MASTER, or it can be run directly from the Compaq Tandem Advanced Command Language (TACL) prompt. You can have all the messages from VHS included in EMS events and sent to the EMS collector. VHS Subsystem The VHS subsystem has two key files: the prompt file and the primary log file. VHS stores application prompt messages in its prompt file and stores all messages it receives in its primary log file. VHS sends event messages to the EMS collector and optionally to a console facility for display messages only. 1-2

25 Introduction to VHS VHS and the Application Environment VHS and the Application Environment You configure your applications to send home terminal messages to VHS. If your applications go into Inspect or Debug, VHS will handle the Inspect prompt or let you do it, depending on your configuration. VHS Components VHS has three major components: VHS process VHS conversational interface (VHSCI) VHS Browser Emulates a 6530 terminal. Enables you to interact with and configure the VHS process in a standard conversational interface. Enables you to look at primary log file messages and application prompts and to reply to application prompts. The VHS process receives messages of many types from many sources. VHS manages six types of messages: open messages, display messages, Inspect prompts, Debug prompts, application prompts, and reply messages. The following table summarizes how VHS responds to messages and prompts. Type of message Open message Display messages Inspect prompts VHS Action Determines the object file of the process and acts accordingly Saves the message in the text part of an EMS event, sends the event to the collector if configured to do so (see parameter GENERATE-DISPLAY-EVENT), and logs the message in the primary log file Depending on the VHSINSP file and the AUTOMATIC-INSPECT- PROCESSING parameter, VHS will handle the Inspect prompt by sending commands found in the VHSINSP file, will also create a saveabend file to save the application s context and will stop the application, or VHS will let you handle the prompt by writing to its prompt file. VHS will log Inspect messages in its primary log file. VHS can also send EMS events to the collector if configured to do so (see the GENERATE-INSPECT-EVENT parameter) 1-3

26 Introduction to VHS VHS Components Type of message Debug prompts Application prompts Reply messages VHS Action VHS sends to Debug the D;T;S (Display;Trace;Stop) commands and stops the application. VHS logs Debug messages in its primary log file. VHS can also send EMS events to the collector if configured to do so (see the GENERATE-INSPECT-EVENT parameter) Saves the prompt to its prompt file. The prompt can be answered via the Prompt Browser screen. Also sends the event to the collector, if configured to do so (see the parameter GENERATE-PROMPT- EVENT), and logs the message Sends reply messages to the application, keeps a copy of the reply in its primary log file, and, if configured to do so (see the GENERATE-PROMPT-EVENT), generates an EMS event 1-4

27 Introduction to VHS VHS Browser VHS Browser VHS Browser, the VHS screen facility, enables you to access two important files created by VHS: VHS primary log file set contains all the messages received by VHS VHS prompt file contains all outstanding (unanswered) prompts received from applications The VHS primary log file set provides an audit trail of the messages received by VHS. This log or audit trail is actually a set of up to five files. You can specify the primary and secondary extent sizes and maximum number of extents of the primary log files when you start VHS. See Section 3, Using VHS, for more information about the VHS primary log file set. To view the primary log file set or the VHS prompt file, you access the appropriate VHS Browser screen. On the Log Browser screen, if you want to view messages from a specific process or after a specific time, you can specify criteria such as date, time, or process. The following table summarizes the functions of VHS Browser: Screen Log Browser screen Prompt Browser screen Prompt Detail screen VHS Profile screen Environment Detailed screen Function Displays messages in the VHS primary log file Allows you to view and reply to application prompts in the prompt file Allows you to get detailed information and reply to an application prompt Displays information about the VHS configuration. If your VHS configuration has multiple environments or is linked to other nodes, this screen enables you to change nodes Provides a list of all existing environments, gives detailed information on selected environments, and lists all VHS processes for a selected environment. This screen also enables you to change the current environment 1-5

28 Introduction to VHS VHS Browser Figure 1-2 shows how the VHS Browser screens are organized. Figure 1-2. VHS Browser Screens Log Browser Prompt Browser Prompt Detail VHS Profile Environment Detail VST012.vsd 1-6

29 Introduction to VHS Using Multiple VHS Processes Using Multiple VHS Processes You can use multiple VHS processes to balance the load on your system. For instance, you could have one VHS process for specific applications: $VHS1 could run in CPU0 and receive messages from telecommunication applications, $VHS2 could run in CPU2 and receive messages from production applications, and $VHS3 could run in another CPU and receive messages from development applications. Note that each VHS process can handle a maximum of 512 opens at the same time. Note. VHS cannot be opened by remote processes. VHS can only be opened by local processes. When you have multiple VHS processes running on your system, you can choose to have these processes use one set of log and prompt files. Figure 1-3 shows how three VHS processes ($VHS1, $VHS2, and $VHS3) share the same primary log and prompt files. However, you can create a separate VHS environment for one or more VHS processes, with its own set of prompt and log files, as described later. Figure 1-3. Multiple VHS Processes Environment: VHS $VHS1 VHS Log File VHS Inspect File $VHS2 $VHS3 VHS Prompt File VST013.vsd 1-7

30 Introduction to VHS VHS on a Node VHS on a Node VHS, on a single node, has multiple components: first, the VHS non-stop process itself, with its various files; then, the Pathway environment, which includes the VHS Browser server, the Help Server, and some other files. Figure 1-4 shows a complete VHS setup on one node with a single environment including an operator console program working with VHS. Figure 1-4. VHS On One Node With A Single Environment Node \A Management Application EMS Log File Operator Console EMS Collector VHS Browser Server VHSB Conf File VHS Prompt File VHS Log File $VHS VHS Inspect File Application

31 Introduction to VHS Setting Up VHS Environments Setting Up VHS Environments The grouping of multiple VHS processes that share one VHS prompt file and one VHS primary log file is called a VHS environment. You might have one VHS environment for ATM applications and another VHS environment for point-of-sale programs. You can have up to a hundred separate VHS environments. Each VHS environment has a name that you specify, such as ATM, POS, or DEV. Figure 1-5 shows a VHS configuration that includes an operator console program (such as ViewPoint or NonStop NET/MASTER). This configuration has two environments: ATM and POS. You use Pathway screens to move from environment to environment. For the clarity of the diagram, only one VHS process is depicted per environment. You could assume that each $ATM and $POS represents one or more VHS processes. Figure 1-5. Multiple VHS Environments on One Node Node \A Management Application Operator Console EMS Log File VHSB Conf File VHS Browser Server EMS Collector Env: POS Env: ATM VHS Prompt File VHS Log File VHS Prompt File VHS Log File $POS $ATM VHS Inspect File VHS Inspect File Application Application

32 Introduction to VHS VHS on a Network VHS on a Network You can have VHS installed and running on various nodes. The VHS Pathway environment must be installed on each node you want to get information from. From one node, using the VHS Profile screen, you can go to any other node that has the VHS Pathway environment installed and view the primary log file, reply to any prompt, and so on. You can perform all the same functions as if you were on the local node. Note. VHS cannot be opened by remote processes. VHS can only be opened by local processes. Figure 1-6 shows a complete VHS setup on a network. 1-10

33 Introduction to VHS VHS on a Network Figure 1-6. VHS on a Network Node \A Node \B VHS Screens VHSB Conf File Pathway TCP Pathway TCP VHSB Conf File VHS Browser Server EMS Collector EMS Log File VHS Browser Server EMS Collector EMS Log File VHS Log File VHS Log File VHS Prompt File VHS Prompt File $VHS $VHS VHS Inspect File Application VHS Inspect File Application

34 Introduction to VHS Centralizing VHS EMS Events Centralizing VHS EMS Events A VHS process can generate its EMS events to a local or a remote collector. To centralize VHS EMS events on one node, you can set the _EMS_COLLECTOR define for all the VHS processes on every node to a remote/centralized collector. From the central node you will be able to see all VHS EMS events, as depicted in Figure 1-7. Figure 1-7. Centralized VHS EMS Events Node \A EMS Collector Environment: VATM Application $VTAM1 $VTAM2 VHS Prompt File VHS Log File Node \B Environment: POS Environment: ATM Application Application $POS1 $POS2 $POS3 $ATM1 $ATM2 $ATM3 VHS Prompt File VHS Log File VHS Prompt File VHS Log File VST017.vsd 1-12

35 Introduction to VHS Centralizing VHS EMS Events 1-13

36 Introduction to VHS Centralizing VHS EMS Events 1-14

37 2 Installing VHS This section describes how to install and configure the NonStop Virtual Hometerm Subsystem (VHS) components: VHS Process VHSCI VHS Graphical User Interface (GUI) Agent VHS Browser It is recommended that you read this section before installing or running VHS for the first time. The VHS and VHSCI programs are stand-alone programs that must be installed and configured before you install the VHS Browser facility and/or the VHS GUI. The VHS GUI Agent facility is the set of host files needed to use the VHS Graphical User Interface on a Microsoft Windows NT platform. See Section 8, The VHS GUI, for a description of this interface. The VHS Browser facility is a Pathway application that can be integrated with the ViewPoint operation console facility and accessed through the ViewPoint EXTRAS screen. The VHS Browser facility can also be installed as a stand-alone Pathway system and be accessed through the TACL product or by other management applications such as NonStop NET/MASTER. A stand-alone Pathway system is a Pathway system dedicated to the VHS Browser facility. If you are running ViewPoint but do not have an EXTRAS screen configured, VHS provides a ViewPoint EXTRAS screen configuration with options to access the VHS Browser and another Tandem product, the Object Monitoring Facility (OMF). If you do not have OMF, the OMF functions are not functional. For VHS Browser to perform correctly, you must follow the proper procedures for installing and configuring the ViewPoint and NonStop NET/MASTER products. The installation procedures described in this section include references to the ViewPoint configuration used with the VHS Browser. For more information on ViewPoint or NonStop NET/MASTER, see the appropriate product manuals. Note. VHS is designed to be used with the Event Management Service (EMS) and requires proper EMS operation. For more information about event management, see the EMS Manual. This section has the following subsections: VHS system requirements Installation summary Installing the VHS and VHSCI programs and the VHS GUI Agent facility Installing the VHS Browser in ViewPoint Installing the VHS Browser as a stand-alone Pathway system 2-1

38 Installing VHS VHS System Requirements Modifying the VHS configuration files VHS run-time options VHS System Requirements VHS requires the NonStop Kernel operating system, release D20.06 or later. To install the VHS Browser facility as a stand-alone Pathway application, you must have Pathway release D20 or later. If you install the VHS Browser facility in ViewPoint, you must have the ViewPoint, release D20 or later. VHS Disk Space Requirements The VHS installation subvolume (ISV) uses approximately 2.5 megabytes of disk space. Installation Summary The VHS installation procedure is summarized here. You use: INSTALL to copy VHS from tape to an installation subvolume. INSTVHS to install the VHS and VHSCI programs and the VHS GUI Agent files first and then the VHS Browser. The VHS Browser can be installed as a standalone Pathway system or as part of ViewPoint. If you wish to install the VHS GUI, refer to Section 8, The VHS GUI, and to the Softdoc. 2-2

39 Installing VHS Creating the VHS Installation Subvolume (ISV) Figure 2-1 shows the sequence of steps required to install all the VHS components. Figure 2-1. VHS Installation Flow Chart Start Create VHS Installation subvolume Install VHS, VHSCI, and VHS GUI agent facility Use option 1 of the INSTVHS routine Browser stand-alone? No Install Browser in ViewPoint/IOC environment Use option 2 of the INSTVHS routine Yes Install Browser in Pathway system Use option 3 or 4 of the INSTVHS routine Customize VHS configuration files End VST021.vsd Creating the VHS Installation Subvolume (ISV) You should follow any instructions given in the associated software release document and any installation instructions that come with your site update tape (SUT). Install the software from the SUT by using the INSTALL program provided with the tape. The INSTALL program handles the installation of the NonStop VHS system software. Table 2-1 lists the files that you should find in your installation subvolume following this step. 2-3

40 Installing VHS Installing the VHS Subsystem Components Table 2-1. NonStop VHS Installation Subvolume (ISV) File Listing File Name GLNK INSTSEGF INSTVHS POBJCOD POBJDIR REXTRA VHS VHSBCONF VHSBHELP VHSBSVR VHSBTEXT VHSCI VHSCSTM VHSDDL VHSGAGT VHSGCONF VHSGTEXT VHSGTPL VHSGUI VHSINSP VHSSTART VHSTEXT SOFTDOC ZVHSC ZVHSCOB ZVHSDDL ZVHSSEGF ZVHSTACL ZVHSTAL ZVHSTMPL File Description ViewPoint SCREEN COBOL definitions used to compile REXTRA VHS TACL installation segment file VHS TACL macro used to install the product VHS Browser requester programs library (code) VHS Browser requester programs library (directory) ZVPT-EXTRAS SCREEN COBOL program example to call VHS Browser screens VHS program VHS Browser environment configuration file example VHS Browser HELP server program VHS Browser server program VHS Browser HELP text VHS conversational interface VHS default custom file VHS source DDL definition for the primary log file database VHS Agent program for the VHS GUI VHS Agent configuration file VHS Agent HELP file VHS Agent s Filter template file VHS GUI zip file to be downloaded to a PC VHS Inspect file VHS startup file example VHSCI HELP and error text Programmer notes supplied on the release tape VHS SPI/EMS definitions for C VHS SPI/EMS definitions for COBOL85 VHS SPI/EMS definitions for DDL VHS SPI/EMS segment file VHS SPI/EMS definitions for TACL VHS SPI/EMS definitions for TAL VHS EMS templates object file Installing the VHS Subsystem Components The INSTVHS routine automates the installation of the VHS components and subsequent updates. The INSTVHS routine affects the following files: 2-4

41 Installing VHS Installing VHS for the First Time Program and configuration files for the VHS and VHSCI programs and the VHS GUI Agent facility Program and configuration files for the VHS Browser facility HELP text files VHS Browser Pathway configuration files The INSTVHS routine presents four options to help you install and update the VHS components. The four options are: 1. Install or update VHS and VHSCI programs and the VHS GUI Agent facility 2. Install or update the VHS Browser facility in a running ViewPoint Pathway system 3. Install the VHS Browser facility as a stand-alone Pathway system 4. Update the VHS Browser facility in a stand-alone Pathway system After you install the VHS and VHSCI programs and the VHS GUI Agent facility by choosing option 1, determine how you want to install the VHS Browser facility and then select the appropriate option (2, 3, or 4). If you wish to install the VHS GUI, refer to Section 8, The VHS GUI, and to the Softdoc. Installing VHS for the First Time INSTVHS follows certain general guidelines when installing VHS for the first time: VHS files such as the VHS programs, help text, and configuration files are owned by the user running the installation routine; their security attributes are set to NUNU. VHS Pathway files are owned by the user running the installation routine; their security attributes are set to the current default security values. Updating VHS INSTVHS follows certain general guidelines when installing a VHS software update: Files released by Tandem replace older versions. Files containing user data (such as VHSCSTM, VHSBCONF, and VHSGCONF) are not replaced. If the installation replaces an old copy of a VHS file, such as the VHS program or HELP text file, the new file has the owner and security attributes of the old file. If the installation replaces an old copy of an VHS configuration file, the new file has the owner and the security attributes of the user running the installation routine. If the installation creates a new file, the new file is owned by the user running the installation routine; its security attributes are set to the current default security values. 2-5

42 Installing VHS Updating VHS Each option of the INSTVHS routine uses a different definition file to direct files to their intended subvolumes and to set common configuration parameters. You should use the default definition file name when you install the VHS components. Table 2-2 describes the default definition file name used by each INSTVHS option. Table 2-2. INSTVHS Definition File Name Used by Each INSTVHS Option INSTVHS Option Default Definition File Name File Description 1 INSTPROG Definition file used to keep the installation parameters for the VHS and VHSCI programs 2 INSTBVPT Definition file used to keep the installation parameters for the VHS Browser in ViewPoint 3 or 4 INSTBSAP Definition file used to keep the installation parameters for the VHS Browser in a stand-alone Pathway system Based on the INSTVHS option selected, INSTVHS generates a default definition file and provides a menu-like interface with which you can modify the default parameters. 2-6

43 Installing VHS Installing the VHS and VHSCI Programs and the VHS GUI Agent Facility Installing the VHS and VHSCI Programs and the VHS GUI Agent Facility To install the VHS and VHSCI programs and the VHS GUI Agent facility, you run the INSTVHS routine and follow the directions (see Figure 2-2). Figure 2-2. Using the Installation Program Start Partial SYSGEN Use the INSTALL program Complete INSTALL Run INSTALL^ TEMPLATES Macro Install VHS, VHSCI, & VHS GUI programs & agent files Use option 1 of the INSTVHS routine VST022.vsd You can terminate the installation activity by pressing the BREAK key at any time during the installation process. If the installation produces undesirable results, you can purge the undesirable files and reexecute the installation procedure. After a successful installation of the VHS and VHSCI programs and of the VHS GUI Agent facility, INSTVHS will redisplay its menu, and you will be able to continue with the installation of the VHS Browser facility. Before you install VHS and VHSCI and the VHS GUI Agent facility, review Table 2-3 for the parameters required. Also, if you wish to install the VHS GUI, refer to Section 8, The VHS GUI, for a more complete description of the GUI installation parameters. Note. VHS must be stopped before you update the VHS and VHSCI programs. Also, all users of the VHS GUI must exit this application. If VHS is not stopped, or if the VHS GUI applications are still running, the installation fails. 2-7

44 Installing VHS Installing the VHS and VHSCI Programs and the VHS GUI Agent Facility Table 2-3. VHS and VHSCI Installation Parameter Values (page 1 of 5) No. Name Value Default Description 1 ISV isv-subvolume current subvolume 2 VHS-PROGRAM- SUBVOL 3 VHSCSTM-USER- SUBVOL 4 VHS-STARTUP- FILE 5 VHS-PROCESS- NAME 6 VHS-PRIMARY- BACKUP-CPU VHS-programsubvolume default-usersubvolume startup-file $SYSTEM.VHS default user subvolume $SYSTEM.VHS. VHSSTART Specifies the name of the installation subvolume containing the software update. The ISV parameter has the label $volume.zvhs. Specifies the subvolume on which INSTVHS places the VHS and VHSCI programs and help text. Specifies the subvolume on which INSTVHS will create a default VHS custom file (VHSCSTM) for the current user. This file has to be located in the default user subvolume and will be executed each time you run the VHSCI program. Each VHSCI user should have a VHSCSTM file in his/her own default subvolume. Specifies the name of the startup file that will be created during the installation. This start-up file, a command (OBEY) file, can then be executed to start the VHS process. process-name $VHS Specifies the name of the VHS process. primary-backupcpu 0:1 Specifies a pair of CPUs in which VHS will run. 7 VHS-PRIORITY priority 180 Specifies the priority at which the VHS process will be executing. It is recommended that a high priority (relative to your online applications) be given to the VHS process. 2-8

45 Installing VHS Installing the VHS and VHSCI Programs and the VHS GUI Agent Facility Table 2-3. VHS and VHSCI Installation Parameter Values (page 2 of 5) No. Name Value Default Description 8 VHS-HOMETERM home-terminal default system home terminal 9 VHS-EMS- COLLECTOR 10 VHS-SUPPRESS- DISPLAY 11 VHS- ENVIRONMENT- NAME 12 PRIMARY-LOG- FILE-NAME 13 PRIMARY-LOG- FILE-CODE 14 PRIMARY-LOG- SECURITY Specifies the home terminal for VHS. Possible values are any existing physical (static) terminal name or the MYTERM keyword. If MYTERM is specified, the hometerm of VHS will be the one from which it is started. ems-collector $0 Specifies the name of the EMS collector used by VHS to report events. display-onconsole FALSE Specifies whether the display messages sent by VHS will be shown on the ViewPoint or NonStop Net/Master OCS screen. Valid parameter values are TRUE or FALSE. environment-name VHS Specifies the name of the environment that this VHS will run. The name must be from one to eight letters with no embedded blanks. This name will be used for two purposes: as a prefix for all EMS messages generated and by the VHS Browser facility to specify which VHS environment the user wants to look at. primary-logfile $SYSTEM. VHSLOG. LOG Specifies the name of the primary log file for VHS. The form of this parameter is $volume.subvolume.fi leprefix, where fileprefix must be exactly 3 alphabetic characters. primary-file-code 0 Specifies the file code used when creating the log files. file-security NUUU Specifies the default security used by VHS when it creates primary log files. 2-9

46 Installing VHS Installing the VHS and VHSCI Programs and the VHS GUI Agent Facility Table 2-3. VHS and VHSCI Installation Parameter Values (page 3 of 5) No. Name Value Default Description 15 PRIMARY-LOG- MAX-EXTENTS 16 VHS-INSPECT- SAVEFILE 17 VHS-PURGE- SAVEFILE maximum-extents 16 Specifies the maximum number of extents to be created for the primary log file. The value is an integer in the range of 1 through 978. inspect-savefile purge-savefileflag $SYSTEM. VHSDUMP. SAVE0000 FALSE Specifies the name of the Inspect saveabend files for VHS. The form of this parameter is $volume.subvolume.fi leprefixnnnn, where fileprefix must be 4 consecutive alphabetic characters and nnnn is replaced with numbers. Specifies whether VHS should add the force it (!) option when VHS sends a SAVE command to Inspect. When this option is set to TRUE, Inspect purges any savefile that existed before with the same file name. Valid parameter values are TRUE or FALSE. 18 VHS-GUI-MODE gui-mode-flag OFF Specifies whether the VHS GUI will be used to reply to prompts. If the parameter is set to OFF, the VHS GUI will not be able to reply to application prompts. Valid parameter values are ON and OFF. See Section 8, The VHS GUI for a more complete description of this parameter. 2-10

HPE NonStop Remote Server Call (RSC/MP) Messages Manual

HPE NonStop Remote Server Call (RSC/MP) Messages Manual HPE NonStop Remote Server Call (RSC/MP) Messages Manual Abstract This manual provides a listing and description of RSC/MP messages that are reported on the HPE NonStop host and on RSC/MP workstations.

More information

EMS FastStart Manual. Abstract. Product Version. Supported Releases. Part Number Published Release ID

EMS FastStart Manual. Abstract. Product Version. Supported Releases. Part Number Published Release ID EMS FastStart Manual Abstract This manual provides information about the EMS FastStart program including installation, event message design, instructions for running the program, and customizing EMS FastStart

More information

CROSSREF Manual. Tools and Utilities Library

CROSSREF Manual. Tools and Utilities Library Tools and Utilities Library CROSSREF Manual Abstract This manual describes the CROSSREF cross-referencing utility, including how to use it with C, COBOL 74, COBOL85, EXTENDED BASIC, FORTRAN, Pascal, SCREEN

More information

HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide

HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide Abstract This manual describes the installation, configuration, and management of RSC/MP software on a HP NonStop system acting

More information

Enform Plus Reference Manual

Enform Plus Reference Manual Enform Plus Reference Manual Abstract This manual provides detailed information about the syntax of the Enform Plus language. Product Version Enform Plus D46 Supported Releases This manual supports D46.00

More information

DSM/SCM Messages Manual

DSM/SCM Messages Manual DSM/SCM Messages Manual Abstract This manual provides cause, effect, and recovery information for messages and errors that you might encounter while using the Distributed Systems Management/Software Configuration

More information

Native Inspect Manual

Native Inspect Manual Native Inspect Manual Abstract This manual describes how to use the symbolic command-line debugger Native Inspect for debugging TNS/E native processes and snapshot files on HP NonStop Series TNS/E systems.

More information

TNS/R Native Application Migration Guide

TNS/R Native Application Migration Guide TNS/R Native Application Migration Guide Abstract This manual introduces the HP NonStop Series/RISC (TNS/R) native development and execution environments and explains how to migrate existing HP NonStop

More information

Spooler Plus Programmer s Guide

Spooler Plus Programmer s Guide Spooler Plus Programmer s Guide Abstract This manual describes the Spooler Plus subsystem, its uses, and its applications. This guide is intended for application programmers who want to use the Spooler

More information

TIC Server Object Gateway User s Guide

TIC Server Object Gateway User s Guide TIC Server Object Gateway User s Guide Glossary Index Figures Tables What s New in This Manual ix Manual Information ix New and Changed Information ix About This Manual xi Objectives of This Manual Audience

More information

ViewSys User s Guide Abstract Product Version Supported Release Version Updates (RVUs) Part Number Published

ViewSys User s Guide Abstract Product Version Supported Release Version Updates (RVUs) Part Number Published ViewSys User s Guide Abstract ViewSys provides system managers and system operators the ability to view system resources on HP NonStop servers. This manual describes how the ViewSys program operates and

More information

Telserv Manual Abstract Product Versions Supported Release Version Updates (RVUs) Part Number Published

Telserv Manual Abstract Product Versions Supported Release Version Updates (RVUs) Part Number Published Telserv Manual Abstract This manual describes the HP NonStop Telserv subsystem. Part I contains a product overview. Part II contains operational and configuration information for system administrators,

More information

Measure User s Guide Abstract Product Version Supported Release Version Updates (RVUs) Part Number Published

Measure User s Guide Abstract Product Version Supported Release Version Updates (RVUs) Part Number Published Measure User s Guide Abstract This manual describes how to use the Measure performance monitor to collect and examine data, through either a command interface or programmatic interface. This manual is

More information

ATM Configuration and Management Manual

ATM Configuration and Management Manual ATM Configuration and Management Manual Abstract This manual describes how to configure, operate, and manage the ATM subsystem on an HP NonStop S-series server. The manual includes descriptions of the

More information

OSI/FTAM Responder Manual

OSI/FTAM Responder Manual OSI/FTAM Responder Manual Abstract This manual describes the operation of the Compaq Open Systems Interconnection/File Transfer, Access and Management (OSI/FTAM) responder and its virtual filestore (VFS).

More information

Guardian User s Guide

Guardian User s Guide Guardian User s Guide Abstract This guide provides basic information about the programs and utilities that are used most often in the Guardian environment by general system or application users. It also

More information

OSI /MHS SCF Reference Manual

OSI /MHS SCF Reference Manual OSI /MHS SCF Reference Manual Abstract This manual describes how to use the Subsystem Control Facility (SCF) interactive interface to configure and control a Compaq Open System Interconnection/Message

More information

HP NonStop Pathway/iTS Web Client Programming Manual

HP NonStop Pathway/iTS Web Client Programming Manual HP NonStop Pathway/iTS Web Client Programming Manual Abstract This manual describes how to convert SCREEN COBOL requesters to web clients and explains how to build and deploy those clients. It also provides

More information

Introduction to. Pathmaker D20

Introduction to. Pathmaker D20 Data Management Library Introduction to Pathmaker Abstract Part Number 067867 Edition This manual introduces the Pathmaker product. It defines basic Pathmaker terminology, suggests several approaches for

More information

Mid-Range Library Media Manager Installation and User s Guide

Mid-Range Library Media Manager Installation and User s Guide Mid-Range Library Media Manager Installation and User s Guide Abstract This guide describes how to install and use the Mid-Range Library Media Manager software. It includes information about connection

More information

DataLoader/MX Reference Manual

DataLoader/MX Reference Manual DataLoader/MX Reference Manual Abstract This manual describes the features and functionality of the DataLoader/MX product, a tool to load HP NonStop SQL/MX, SQL/MP, and Enscribe databases. Product Version

More information

Version Monitoring Agent User s Guide SC

Version Monitoring Agent User s Guide SC Tivoli IBM Tivoli Advanced Catalog Management for z/os Version 02.01.00 Monitoring Agent User s Guide SC23-7974-00 Tivoli IBM Tivoli Advanced Catalog Management for z/os Version 02.01.00 Monitoring Agent

More information

Real-time Process Monitor

Real-time Process Monitor HP NonStop RPM Real-time Process Monitor User s Guide Abstract HP NonStop Real-time Process Monitor (RPM) is a high-performance, low-overhead, Cpu and Process monitoring utility specifically engineered

More information

Native Inspect Manual

Native Inspect Manual Native Inspect Manual Part Number: 528122-015R Published: November 2015 Edition: H06.23 and subsequent H-series RVUs, J06.12 and subsequent J-series RVUs, and L15.02 and subsequent L-series RVUs Copyright

More information

SNMP Subagent Programmer s Guide

SNMP Subagent Programmer s Guide Networking and Data Communications Library SNMP Subagent Programmer s Guide Abstract This manual explains how to use the NonStop SNMP (Simple Network Management Protocol) Subagent Toolkit. The Toolkit

More information

Library Media Manager Installation and User s Guide

Library Media Manager Installation and User s Guide Library Media Manager Installation and User s Guide Abstract This guide describes how to install and use the Library Media Manager software. It includes information about connection with an HP Integrity

More information

Debug Manual Abstract Product Version Supported Release Version Updates (RVUs) Part Number Published

Debug Manual Abstract Product Version Supported Release Version Updates (RVUs) Part Number Published Debug Manual Abstract This manual describes the Guardian debug facility (Debug) on HP NonStop systems. Product Version G07 Supported Release Version Updates (RVUs) This publication supports G06.06 and

More information

HP NonStop ASAP Server Manual

HP NonStop ASAP Server Manual HP NonStop ASAP Server Manual Abstract HP NonStop Availability Statistics and Performance (ASAP) is an availability, state, and performance statistics collection infrastructure for the HP NonStop operating

More information

Layout and display. STILOG IST, all rights reserved

Layout and display. STILOG IST, all rights reserved 2 Table of Contents I. Main Window... 1 1. DEFINITION... 1 2. LIST OF WINDOW ELEMENTS... 1 Quick Access Bar... 1 Menu Bar... 1 Windows... 2 Status bar... 2 Pop-up menu... 4 II. Menu Bar... 5 1. DEFINITION...

More information

IBM. Enterprise Systems Architecture/ Extended Configuration Principles of Operation. z/vm. Version 6 Release 4 SC

IBM. Enterprise Systems Architecture/ Extended Configuration Principles of Operation. z/vm. Version 6 Release 4 SC z/vm IBM Enterprise Systems Architecture/ Extended Configuration Principles of Operation Version 6 Release 4 SC24-6192-01 Note: Before you use this information and the product it supports, read the information

More information

Tandem OSI/AS and OSI/TS Supplement (Includes RFC-1006 Support)

Tandem OSI/AS and OSI/TS Supplement (Includes RFC-1006 Support) Networking and Data Communications Library Tandem OSI/AS and OSI/TS Supplement (Includes RFC-1006 Support) Abstract Part Number 107751 Edition This manual supplements the C30.08/D10 editions of the seven-manual

More information

HP NonStop MXDM User Guide for SQL/MX Release 3.2

HP NonStop MXDM User Guide for SQL/MX Release 3.2 HP NonStop MXDM User Guide for SQL/MX Release 3.2 HP Part Number: 691119-001 Published: August 2012 Edition: J06.14 and subsequent J-series RVUs; H06.25 and subsequent H-series RVUs Copyright 2012 Hewlett-Packard

More information

WAN Subsystem Configuration and Management Manual

WAN Subsystem Configuration and Management Manual WAN Subsystem Configuration and Management Manual Abstract This manual describes how to monitor, modify, and control the wide area network (WAN) subsystem and configure a ServerNet wide area network (SWAN

More information

dba/m Database Manager V7.1 User s Guide

dba/m Database Manager V7.1 User s Guide dba/m Database Manager V7.1 User s Guide Release 7.1. May, 2005 Copyright Information Copyright 1996-2005 by Genus Software, Incorporated. All rights reserved. Trademark Acknowledgments NonStop dba/m Database

More information

HP NonStop TCP/IPv6 Configuration and Management Manual

HP NonStop TCP/IPv6 Configuration and Management Manual HP NonStop TCP/IPv6 Configuration and Management Manual Abstract This manual describes how to configure and manage the HP NonStop TCP/IPv6 subsystem on HP NonStop S-series servers and HP Integrity NonStop

More information

Excel Programming with VBA (Macro Programming) 24 hours Getting Started

Excel Programming with VBA (Macro Programming) 24 hours Getting Started Excel Programming with VBA (Macro Programming) 24 hours Getting Started Introducing Visual Basic for Applications Displaying the Developer Tab in the Ribbon Recording a Macro Saving a Macro-Enabled Workbook

More information

Common Run-Time Environment (CRE) Programmer s Guide

Common Run-Time Environment (CRE) Programmer s Guide Common Run-Time Environment (CRE) Programmer s Guide Abstract This manual describes the Common Run-Time Environment (CRE), a set of run-time services that enable system and application programmers to write

More information

HPE Code Coverage Tool Reference Manual for HPE Integrity NonStop NS-Series Servers

HPE Code Coverage Tool Reference Manual for HPE Integrity NonStop NS-Series Servers HPE Code Coverage Tool Reference Manual for HPE Integrity NonStop NS-Series Servers Abstract This manual describes the HPE Code Coverage Tool for HPE Integrity NonStop NS-Series Servers. It addresses application

More information

TCP/IP Application Services (TAS) Mail Processor

TCP/IP Application Services (TAS) Mail Processor !()+ OS 2200 TCP/IP Application Services (TAS) Mail Processor User Guide Copyright ( 1997 Unisys Corporation. All rights reserved. Unisys is a registered trademark of Unisys Corporation. Level 6R1 September

More information

C How to Program, 6/e by Pearson Education, Inc. All Rights Reserved.

C How to Program, 6/e by Pearson Education, Inc. All Rights Reserved. C How to Program, 6/e 1992-2010 by Pearson Education, Inc. An important part of the solution to any problem is the presentation of the results. In this chapter, we discuss in depth the formatting features

More information

IT 374 C# and Applications/ IT695 C# Data Structures

IT 374 C# and Applications/ IT695 C# Data Structures IT 374 C# and Applications/ IT695 C# Data Structures Module 2.1: Introduction to C# App Programming Xianrong (Shawn) Zheng Spring 2017 1 Outline Introduction Creating a Simple App String Interpolation

More information

3 An NCL Tutorial Tandem Computers Incorporated 3 1

3 An NCL Tutorial Tandem Computers Incorporated 3 1 3 An NCL Tutorial Perhaps the best way to learn how to use NCL is to write a couple of NCL procedures and execute them. This section guides you through the steps required to do so. This section covers

More information

Guardian Procedure Errors and Messages Manual

Guardian Procedure Errors and Messages Manual Guardian Procedure Errors and Messages Manual Abstract This manual describes the Guardian messages for HP systems that use the HP NonStopTM operating system. The manual covers the following types of messages:

More information

SWAN Concentrator and WAN Subsystem Troubleshooting Guide

SWAN Concentrator and WAN Subsystem Troubleshooting Guide SWAN Concentrator and WAN Subsystem Troubleshooting Guide Abstract This guide describes how to troubleshoot the SWAN concentrator, SWAN 2 concentrator, and WAN subsystem on an HP Integrity NonStop BladeSystem,

More information

DLL Programmer s Guide for TNS/E Systems

DLL Programmer s Guide for TNS/E Systems DLL Programmer s Guide for TNS/E Systems Abstract This guide describes how application programmers can use the DLL facilities provided on TNS/E systems and recommends good practices in using them. Product

More information

Using the Command-Line Interface

Using the Command-Line Interface CHAPTER 1 The command-line interface (CLI) is a line-oriented user interface that has a set of commands for configuring, managing, and monitoring the CSS. To help you use these commands, this chapter provides

More information

nld Manual Abstract Product Version Supported Release Updates (RVUs) Part Number Published

nld Manual Abstract Product Version Supported Release Updates (RVUs) Part Number Published nld Manual Abstract This publication explains how to use the TNS/R native link editor nld (T6017), which links and changes object file attributes. Product Version nld D44 Supported Release Updates (RVUs)

More information

XYGATE Access Control

XYGATE Access Control XYGATE Access Control Reference Manual Abstract XYGATE Access Control (XAC) is designed to eliminate the need to share privileged userids and PROGID programs on a system-wide basis. XAC can provide full

More information

HP Operations Agent for NonStop

HP Operations Agent for NonStop HP Operations Agent for NonStop Installation Guide Part number: 540072-011 Eleventh edition: 03/2014 Legal notices Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but

More information

DCN Delegate Database. Software User Manual LBB3580

DCN Delegate Database. Software User Manual LBB3580 DCN en LBB580 GENERAL CONTENTS Chapter 1-1.1 About Chapter 2 - Getting Started 2.1 Starting 2.2 Using Help Chapter - Preparing for a Conference.1 The main window.2 Working with names files. Entering delegate

More information

M8501 and M8502 ACL Tape Drive Installation and User s Guide

M8501 and M8502 ACL Tape Drive Installation and User s Guide M8501 and M8502 ACL Tape Drive Installation and User s Guide Abstract This guide provides information about installing, operating, and maintaining the M8501 and M8502 ACL tape drives on HP NonStop servers.

More information

Scenario Manager User Guide. Release September 2013

Scenario Manager User Guide. Release September 2013 Scenario Manager User Guide Release 6.2.1 September 2013 Scenario Manager User Guide Release 6.2.1 September 2013 Document Control Number: 9MN12-62110017 Document Number: SMUG-13-FCCM-0017-6.2.1-01 Oracle

More information

Object Code Accelerator Manual

Object Code Accelerator Manual Object Code Accelerator Manual Abstract This manual describes how to use the Object Code Accelerator (OCA) to optimize TNS object code for HP TNS/E systems. OCA processes files for the Guardian environment.

More information

Administration Tools User Guide. Release April 2015

Administration Tools User Guide. Release April 2015 Administration Tools User Guide Release 6.2.5 April 2015 Administration Tools User Guide Release 6.2.5 April 2015 Part Number: E62969_05 Oracle Financial Services Software, Inc. 1900 Oracle Way Reston,

More information

PS TEXT EDIT and PS TEXT FORMAT User s Guide

PS TEXT EDIT and PS TEXT FORMAT User s Guide Information Management Technology Library PS TEXT EDIT and PS TEXT FORMAT User s Guide Part Number 058060 Tandem Computers Incorporated Document History Edition Part Number Product Version OS Version Date

More information

Copyright. Trademarks Attachmate Corporation. All rights reserved. USA Patents Pending. WRQ ReflectionVisual Basic User Guide

Copyright. Trademarks Attachmate Corporation. All rights reserved. USA Patents Pending. WRQ ReflectionVisual Basic User Guide PROGRAMMING WITH REFLECTION: VISUAL BASIC USER GUIDE WINDOWS XP WINDOWS 2000 WINDOWS SERVER 2003 WINDOWS 2000 SERVER WINDOWS TERMINAL SERVER CITRIX METAFRAME CITRIX METRAFRAME XP ENGLISH Copyright 1994-2006

More information

You have accessed an older version of a Paradyne product document.

You have accessed an older version of a Paradyne product document. You have accessed an older version of a Paradyne product document. Paradyne is no longer a subsidiary of AT&T. Any reference to AT&T Paradyne is amended to read Paradyne Corporation. Paradyne 6700-A2-GB41-10

More information

PS TEXT FORMAT Reference Manual

PS TEXT FORMAT Reference Manual Information Management Technology Library PS TEXT FORMAT Reference Manual Abstract This manual explains in detail the commands and advanced features of the PS TEXT FORMAT formatter product. Part Number

More information

Open VMS SUMSLP Utility Manual

Open VMS SUMSLP Utility Manual Open VMS SUMSLP Utility Manual Order Number: AA PS6EA TE May 1993 SUMSLP is a batch-oriented editor that allows multiple update files to be applied to a single input file. Revision/Update Information:

More information

12/22/11. Java How to Program, 9/e. Help you get started with Eclipse and NetBeans integrated development environments.

12/22/11. Java How to Program, 9/e. Help you get started with Eclipse and NetBeans integrated development environments. Java How to Program, 9/e Education, Inc. All Rights Reserved. } Java application programming } Use tools from the JDK to compile and run programs. } Videos at www.deitel.com/books/jhtp9/ Help you get started

More information

A Fast Review of C Essentials Part I

A Fast Review of C Essentials Part I A Fast Review of C Essentials Part I Structural Programming by Z. Cihan TAYSI Outline Program development C Essentials Functions Variables & constants Names Formatting Comments Preprocessor Data types

More information

System Administration of PTC Windchill 11.0

System Administration of PTC Windchill 11.0 System Administration of PTC Windchill 11.0 Overview Course Code Course Length TRN-4830-T 16 Hours In this course, you will gain an understanding of how to perform routine Windchill system administration

More information

Managing Databases. Prerequisites. Information About the Database Administration Tools CHAPTER

Managing Databases. Prerequisites. Information About the Database Administration Tools CHAPTER CHAPTER 4 This chapter describes two Cisco SIP proxy server (Cisco SPS) database administration tools: The registry and routing (regroute) databases tool The MySQL database tool It contains the following

More information

Preface... (vii) CHAPTER 1 INTRODUCTION TO COMPUTERS

Preface... (vii) CHAPTER 1 INTRODUCTION TO COMPUTERS Contents Preface... (vii) CHAPTER 1 INTRODUCTION TO COMPUTERS 1.1. INTRODUCTION TO COMPUTERS... 1 1.2. HISTORY OF C & C++... 3 1.3. DESIGN, DEVELOPMENT AND EXECUTION OF A PROGRAM... 3 1.4 TESTING OF PROGRAMS...

More information

Data Management System (DMS 2200) FORTRAN Data Manipulation Language (FDML)

Data Management System (DMS 2200) FORTRAN Data Manipulation Language (FDML) !()+ OS 2200 Data Management System (DMS 2200) FORTRAN Data Manipulation Language (FDML) Operations and Programming Reference Manual Copyright ( 1997 Unisys Corporation. All rights reserved. Unisys is

More information

C# Programming: From Problem Analysis to Program Design. Fourth Edition

C# Programming: From Problem Analysis to Program Design. Fourth Edition C# Programming: From Problem Analysis to Program Design Fourth Edition Preface xxi INTRODUCTION TO COMPUTING AND PROGRAMMING 1 History of Computers 2 System and Application Software 4 System Software 4

More information

EDIABAS BEST/2 LANGUAGE DESCRIPTION. VERSION 6b. Electronic Diagnostic Basic System EDIABAS - BEST/2 LANGUAGE DESCRIPTION

EDIABAS BEST/2 LANGUAGE DESCRIPTION. VERSION 6b. Electronic Diagnostic Basic System EDIABAS - BEST/2 LANGUAGE DESCRIPTION EDIABAS Electronic Diagnostic Basic System BEST/2 LANGUAGE DESCRIPTION VERSION 6b Copyright BMW AG, created by Softing AG BEST2SPC.DOC CONTENTS CONTENTS...2 1. INTRODUCTION TO BEST/2...5 2. TEXT CONVENTIONS...6

More information

IBM Tivoli Monitoring for Databases: DB2. User s Guide. Version SC

IBM Tivoli Monitoring for Databases: DB2. User s Guide. Version SC IBM Tivoli Monitoring for Databases: DB2 User s Guide Version 5.1.0 SC23-4726-00 IBM Tivoli Monitoring for Databases: DB2 User s Guide Version 5.1.0 SC23-4726-00 Note Before using this information and

More information

Entry Level Media Manager Installation and User s Guide

Entry Level Media Manager Installation and User s Guide Entry Level Media Manager Installation and User s Guide Abstract This guide describes how to install and use the Entry Level Media Manager (ELMM) software. This guide is written for anyone who installs

More information

HP NonStop TCP/IPv6 Migration Guide

HP NonStop TCP/IPv6 Migration Guide HP NonStop TCP/IPv6 Migration Guide Abstract Version This manual discusses the differences between HP NonStop TCP/IP and NonStop TCP/IPv6 and the differences between Parallel Library TCP/IP and NonStop

More information

Db2 Query Management Facility Version 12 Release 2. Installing and Managing Db2 QMF for TSO and CICS IBM GC

Db2 Query Management Facility Version 12 Release 2. Installing and Managing Db2 QMF for TSO and CICS IBM GC Db2 Query Management Facility Version 12 Release 2 Installing and Managing Db2 QMF for TSO and CICS IBM GC27-8877-02 Db2 Query Management Facility Version 12 Release 2 Installing and Managing Db2 QMF

More information

Chapter 2 Basic Elements of C++

Chapter 2 Basic Elements of C++ C++ Programming: From Problem Analysis to Program Design, Fifth Edition 2-1 Chapter 2 Basic Elements of C++ At a Glance Instructor s Manual Table of Contents Overview Objectives s Quick Quizzes Class Discussion

More information

IBM Tivoli Decision Support for z/os Version Messages and Problem Determination IBM SH

IBM Tivoli Decision Support for z/os Version Messages and Problem Determination IBM SH IBM Tivoli Decision Support for z/os Version 1.8.2 Messages and Problem Determination IBM SH19-6902-15 IBM Tivoli Decision Support for z/os Version 1.8.2 Messages and Problem Determination IBM SH19-6902-15

More information

Oracle IVR Integrator

Oracle IVR Integrator Oracle IVR Integrator Concepts and Procedures Release 11i April 2000 Part No. A83630-01 Oracle IVR Integrator Concepts and Procedures, Release 11i Part No. A83630-01 Copyright 2000, Oracle Corporation.

More information

IBM Spectrum Protect Snapshot Version Installation and User's Guide for Windows IBM

IBM Spectrum Protect Snapshot Version Installation and User's Guide for Windows IBM IBM Spectrum Protect Snapshot Version 8.1.4 Installation and User's Guide for Windows IBM IBM Spectrum Protect Snapshot Version 8.1.4 Installation and User's Guide for Windows IBM Note: Before you use

More information

Programmer s Reference

Programmer s Reference Programmer s Reference Copyrights and Notices Attachmate INFOConnect Enterprise Edition 2013 Attachmate Corporation. All Rights Reserved. Patents This Attachmate software is protected by U.S. patents 6252607

More information

Full file at C How to Program, 6/e Multiple Choice Test Bank

Full file at   C How to Program, 6/e Multiple Choice Test Bank 2.1 Introduction 2.2 A Simple Program: Printing a Line of Text 2.1 Lines beginning with let the computer know that the rest of the line is a comment. (a) /* (b) ** (c) REM (d)

More information

INTRODUCTION 1 AND REVIEW

INTRODUCTION 1 AND REVIEW INTRODUTION 1 AND REVIEW hapter SYS-ED/ OMPUTER EDUATION TEHNIQUES, IN. Programming: Advanced Objectives You will learn: Program structure. Program statements. Datatypes. Pointers. Arrays. Structures.

More information

HP NonStop ASAP Messages Manual

HP NonStop ASAP Messages Manual HP NonStop ASAP Messages Manual Abstract This manual documents the messages produced by the Availability Statistics and Performance Monitor (ASAP) an availability, state, and performance statistics collection

More information

HPE Operations Agent for NonStop

HPE Operations Agent for NonStop HPE Operations Agent for NonStop Installation Guide Abstract This guide explains how to install, configure, start and stop OVNM components. Part number: 540072-012 Published: January 2016 Edition: 1 2

More information

IBM Spectrum Protect Snapshot Version Installation and User's Guide for Windows IBM

IBM Spectrum Protect Snapshot Version Installation and User's Guide for Windows IBM IBM Spectrum Protect Snapshot Version 8.1.2 Installation and User's Guide for Windows IBM IBM Spectrum Protect Snapshot Version 8.1.2 Installation and User's Guide for Windows IBM Note: Before you use

More information

dba/m Database Manager V7.1 Installation and Operations Manual

dba/m Database Manager V7.1 Installation and Operations Manual dba/m Database Manager V7.1 Installation and Operations Manual Release 7.1 May 2005 dba/m Database Manager V7.1 Installation and Operations Manual 540155-001 Copyright Information Copyright 1996 2005 Genus

More information

HP NonStop SQL/MX Release 3.2 Installation and Upgrade Guide

HP NonStop SQL/MX Release 3.2 Installation and Upgrade Guide HP NonStop SQL/MX Release 3.2 Installation and Upgrade Guide HP Part Number: 691118-003 Published: May 2013 Edition: J06.14 and subsequent J-series RVUs; H06.25 and subsequent H-series RVUs Copyright 2013

More information

c) Comments do not cause any machine language object code to be generated. d) Lengthy comments can cause poor execution-time performance.

c) Comments do not cause any machine language object code to be generated. d) Lengthy comments can cause poor execution-time performance. 2.1 Introduction (No questions.) 2.2 A Simple Program: Printing a Line of Text 2.1 Which of the following must every C program have? (a) main (b) #include (c) /* (d) 2.2 Every statement in C

More information

UNIT- 3 Introduction to C++

UNIT- 3 Introduction to C++ UNIT- 3 Introduction to C++ C++ Character Sets: Letters A-Z, a-z Digits 0-9 Special Symbols Space + - * / ^ \ ( ) [ ] =!= . $, ; : %! &? _ # = @ White Spaces Blank spaces, horizontal tab, carriage

More information

Dissertation Formatting Rules. Basic Format

Dissertation Formatting Rules. Basic Format All doctoral students will follow APA (6 th edition) formatting for the narrative portion of the dissertation. Refer to this guide for rules specific to Missouri Baptist University dissertations. *Instructions

More information

Cisco Connected Grid Design Suite (CGDS) - Substation Workbench Designer User Guide

Cisco Connected Grid Design Suite (CGDS) - Substation Workbench Designer User Guide Cisco Connected Grid Design Suite (CGDS) - Substation Workbench Designer User Guide Release 1.5 October, 2013 Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone

More information

IBM. AFP Download Plus. Print Services Facility for z/os. Version 4, Release 6.0 S

IBM. AFP Download Plus. Print Services Facility for z/os. Version 4, Release 6.0 S Print Services Facility for z/os IBM AFP Download Plus Version 4, Release 6.0 S550-0433-06 Note Before using this information and the product it supports, read the information in Notices on page 197. This

More information

CITY UNIVERSITY OF NEW YORK. i. Visit:

CITY UNIVERSITY OF NEW YORK. i. Visit: CITY UNIVERSITY OF NEW YORK I. ACCESSING IRB NET (New Registration) i. Visit: https://www.irbnet.org/release/index.html ii. New users: Click on New Registration in the top right corner iii. Fill-out the

More information

Assoc. Prof. Dr. Marenglen Biba. (C) 2010 Pearson Education, Inc. All rights reserved.

Assoc. Prof. Dr. Marenglen Biba. (C) 2010 Pearson Education, Inc. All rights reserved. Assoc. Prof. Dr. Marenglen Biba (C) 2010 Pearson Education, Inc. All rights reserved. Java application A computer program that executes when you use the java command to launch the Java Virtual Machine

More information

OUTLOOK ATTACHMENT EXTRACTOR 3

OUTLOOK ATTACHMENT EXTRACTOR 3 OUTLOOK ATTACHMENT EXTRACTOR 3 PROGRAM HELP GILLMEISTER SOFTWARE WWW.GILLMEISTER-SOFTWARE.COM 1 TABLE OF CONTENTS 1 Table of contents... 1 2 Start... 4 3 Main menu... 4 3.1 Menu entries of the group Menu...

More information

EMC ControlCenter Navisphere Security ADMINISTRATOR S GUIDE. Version 6.X P/N REV A04

EMC ControlCenter Navisphere Security ADMINISTRATOR S GUIDE. Version 6.X P/N REV A04 EMC ControlCenter Navisphere Security Version 6.X ADMINISTRATOR S GUIDE P/N 069001124 REV A04 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 (800) 424-EMC2 http://www.emc.com Copyright

More information

Getting Started with Pervasive.SQL Server Edition

Getting Started with Pervasive.SQL Server Edition Getting Started with Pervasive.SQL Server Edition Copyright 1998 Pervasive Software Inc. All rights reserved worldwide. Reproduction, photocopying, or transmittal of this publication, or portions of this

More information

CITY UNIVERSITY OF NEW YORK. Creating a New Project in IRBNet. i. After logging in, click Create New Project on left side of the page.

CITY UNIVERSITY OF NEW YORK. Creating a New Project in IRBNet. i. After logging in, click Create New Project on left side of the page. CITY UNIVERSITY OF NEW YORK Creating a New Project in IRBNet i. After logging in, click Create New Project on left side of the page. ii. Enter the title of the project, the principle investigator s (PI)

More information

Atalla Boxcar Reference Guide

Atalla Boxcar Reference Guide Atalla Boxcar Reference Guide Abstract This document describes Boxcar, its interface to the Atalla Network Security Processor, and the parameters used to start, initialize, and configure the Boxcar process.

More information

Administrator s Guide. StorageX 7.8

Administrator s Guide. StorageX 7.8 Administrator s Guide StorageX 7.8 August 2016 Copyright 2016 Data Dynamics, Inc. All Rights Reserved. The trademark Data Dynamics is the property of Data Dynamics, Inc. StorageX is a registered trademark

More information

HPE NonStop SQL/MX Release Guide to Stored Procedures in Java

HPE NonStop SQL/MX Release Guide to Stored Procedures in Java HPE NonStop SQL/MX Release 3.2.1 Guide to Stored Procedures in Java Part Number: 691166-003R Published: November 2015 Copyright 2013, 2015 Hewlett Packard Enterprise Development LP The information contained

More information

HP NonStop Server Guide for BEA WebLogic Server 8.1

HP NonStop Server Guide for BEA WebLogic Server 8.1 HP NonStop Server Guide for BEA WebLogic Server 8.1 Abstract This manual describes the installation, configuration, and management of the BEA WebLogic Server on HP Integrity NonStop NS-series servers.

More information

NEW CEIBO DEBUGGER. Menus and Commands

NEW CEIBO DEBUGGER. Menus and Commands NEW CEIBO DEBUGGER Menus and Commands Ceibo Debugger Menus and Commands D.1. Introduction CEIBO DEBUGGER is the latest software available from Ceibo and can be used with most of Ceibo emulators. You will

More information

Introduction to PTC Windchill ProjectLink 11.0

Introduction to PTC Windchill ProjectLink 11.0 Introduction to PTC Windchill ProjectLink 11.0 Overview Course Code Course Length TRN-4756-T 8 Hours In this course, you will learn how to participate in and manage projects using Windchill ProjectLink

More information