A Guide to Installing OLI Software

Size: px
Start display at page:

Download "A Guide to Installing OLI Software"

Transcription

1 A Guide to Installing OLI Software OLI Systems delivers a comprehensive suite of tools designed to help you analyze complex aqueous and multi-solvent electrolyte solution chemistry, thermo-physical properties, phase behavior and corrosion phenomena. This guide describes the procedure to install OLI software on your computer. As of this writing, the installation guide covers the following OLI products: OLI ESP version 8.1 or higher. OLI Analyzer Studio version 3.0 or higher. The installation package is available in two formats: A windows installer package named OLI [Product Name] [Version], for example - OLI Analyzer 3.0, available for download from the OLI Systems web site. A product distribution CD available from OLI Systems. In addition to the installation disk or windows installer package, you will need a serial number and OLI Hardlock security key combination or a serial number associated with an OLI Network License Server running on your network. If you don t have these, please contact OLI Systems ( ). Contents 1 Requirements Hardware Operating System Installation OLI Hardlock Key (Workstation Security) OLI Network License Server Software Setup Verify Installation Application Security Settings for Network License Server OLI Systems, Inc. A Guide to Installing OLI Software Page 1

2 1 Requirements 1.1 Hardware Resource CPU Physical Memory (RAM) Hard Disk Space Monitor Pointing Device Ports Minimum Requirements Intel Pentium MHz or comparable AMD 512 MB At least 200 MB free Color with at least 1024 x 768 resolution 2 or 3 button Microsoft compatible mouse 1 USB port for standalone version 1.2 Operating System The following table shows the versions of Windows that are supported and the preferred service pack level for each. Operating System MS Windows XP (any) Service Pack 2 MS Windows Vista (any) Service Packs Service Pack 1 recommended Please note that OLI no longer supports Windows If you are still using Windows 2000, it is highly recommended that you upgrade to either Windows XP (Home or Professional) or Windows Vista. Also, if possible, it is advisable to upgrade to Internet Explorer 7.0. This has the side-benefit of making sure that your Windows system has the latest support DLLs for Microsoft s COM subsystem. 2 Installation There are two security options available from OLI: 1) workstation security using a Hardlock key or, 2) network security using the OLI Network License Server. If you have received an OLI Hardlock key then follow the instructions in Section 2.1 and then proceed to Section 2.3 to install the software. If your organization uses network security then start at Section 2.2 and then proceed to Section OLI Hardlock Key (Workstation Security) OLI Systems, Inc. A Guide to Installing OLI Software Page 2

3 If you downloaded the installation package from the OLI Systems web site, you will need to contact OLI ( ) to obtain a Hardlock key and associated serial number. To install the USB Hardlock key, simply attach it to any available USB port. Note: OLI no longer ships parallel Hardlock keys. If you do have a parallel Hardlock key, you can install it by attaching it to your computer s parallel port. If you have a printer connected to the parallel port, then unplug your printer, connect the key and then reconnect your printer to the Hardlock key. The Hardlock key will not interfere with your printer. Also, if you have a parallel port security key for another software product, please make sure that the OLI Hardlock key is connected directly to the parallel port and is first in the chain of keys. 2.2 OLI Network License Server If your organization uses OLI Network License Server then you will need an application client serial number and the IP address/hostname of the server running the network license service. Your site administrator should be able to provide you with the information you need. 2.3 Software Setup The setup uses a Windows Installer wizard to lead you through a typical Windows installation process. The installation is available in two formats: A windows installer package named OLI [Product Name] [Version], for example - OLI Analyzer 3.0, available for download from the OLI Systems web site. A product distribution CD available from OLI Systems. Regardless of the installation medium, you would need to locate the Windows Installer package and double-click on it to start the installation process. Please note that the setup process needs Administrator privileges to be able to perform software installation. OLI Systems, Inc. A Guide to Installing OLI Software Page 3

4 The installation starts with the following dialog: Click Next to review the license agreement: OLI Systems, Inc. A Guide to Installing OLI Software Page 4

5 If you agree with the terms of the license agreement, select the I accept the terms radio button and click Next to proceed to the Customer Information dialog: You will need to complete all of the fields on this dialog. Enter the serial number that you received from OLI Systems or your network license administrator. If you enter a network license client serial number, you will be prompted with the Network License Server configuration dialog: OLI Systems, Inc. A Guide to Installing OLI Software Page 5

6 The default license server configuration option is Automatic. If you know the license server IP address/host Name, you can enter it by selecting the Manual checkbox. You can specify the Port number if the license server is running on a custom port. You can enter a Binding String instead, if one is provided by the network license administrator. If you do not have information about your license server simply click on the Next button, you will be able to configure the settings after Analyzer Studio is installed. On clicking Next, the Choose Setup Type dialog will be displayed. You will be able to choose between a Typical or Custom installation. A typical install will install all licensed features and create an application shortcut on the Desktop. If you would like to select the features that are installed, you can select the Custom setup option. A custom setup will also allow you to change certain installation directories and control the creation of the Desktop shortcut. Click on the desired setup type to continue. If you chose the Typical setup option, you will see the Ready to Install dialog where you can proceed with the installation process by clicking the Install button. In case you chose the Custom setup, you will be prompted with the feature selection dialog where you can select the features that are installed. OLI Systems, Inc. A Guide to Installing OLI Software Page 6

7 To enable/disable a feature, click on the small dropdown arrow next to the feature and select the desired installation state. Please note that some features are required for the application to work and thus cannot be disabled. You can also select the application install directory by selecting the main product feature ( OLI Toolkit in this case) and clicking on the browse button. The install directory for the Databanks can also be configured in a similar manner. We suggest that you use the default locations. Once you click Next, the Ready to Install dialog will appear and you can proceed with the installation by selecting Install. You can also enable/disable installation of a Desktop shortcut using the Install Desktop Shortcut(s) checkbox. You will see the following status dialog while the program files are copied, the program group is created and registry entries are added. OLI Systems, Inc. A Guide to Installing OLI Software Page 7

8 If you are using workstation security (standalone version), the Hardlock device driver installation script will start. The Hardlock driver installation does not prompt for any information and displays the text Installing Hardlock Drivers in the installation status field. While the drivers are being installed, the Windows Operating System might display some notifications regarding installation of hardware drivers. Windows may prompt for authorization to install the Hardlock OLI Systems, Inc. A Guide to Installing OLI Software Page 8

9 drivers. Installation of the Hardlock drivers is required for the product to work if workstation security (standalone mode) is being used. After all application components are installed, you will see the following dialog: Simply click Finish to exit the installation. 2.4 Verify Installation To verify the software installation click on the Start button and navigate to the OLI Systems program group in the program menu. You should see a folder named [Product Name] such as Analyzer 3.0 with shortcut icons (depending on the options that you have licensed), such as: Analyzer Studio 3.0 Analyzer Studio 3.0 Help Data Locator 3.0 You will also see the application shortcut on your Windows desktop if you chose to install desktop shortcuts during setup. You can also verify your installation by making sure that files were installed to the desired installation directories OLI Systems, Inc. A Guide to Installing OLI Software Page 9

10 2.5 Application Security Settings for Network License Server If you are using network security and the OLI Network License Server is installed and running, you need to provide correct network information about the license server. The setup wizard would have already prompted you for that information when you installed the program. If for some reason you were unable to provide the network information or if you would like to change your settings, you can do so using the Security Settings and Test utility. The Security Settings and Test utility makes it easy to test and update security related settings. You can launch the security settings utility by selecting About [Product Name], where [Product Name] may be Analyzer, ESP, etc., from the Help menu while the application is running. Please note that the security settings utility is automatically launched if the serial number/license server settings are invalid or if the license service is not running. As an alternative, you can launch the security settings utility by clicking on the Windows Start button and navigating to: Programs\OLI Systems\[Product Name]\Security Click on the Security Settings and Test item to launch the utility: OLI Systems, Inc. A Guide to Installing OLI Software Page 10

11 Press the Open Security button. If the OLI Network License Server is accessible, the message Open succeeded will appear in the Operation Result field. If not, then the following dialog will appear: Click on the Security Options button to open the following settings dialog: OLI Systems, Inc. A Guide to Installing OLI Software Page 11

12 Enter an IP address for the server that is running OLI Network License Server. Alternatively, your network administrator may give you a license server name or binding string to use instead. Either way, input the server address and press OK to accept the changes and close the dialog. Now, press the Open Security button again. If successful, you should see: Press the Check Security button to test the connection and then press the Close Security button to close the connection to the license server. When you re done, press the Close button to exit the application. OLI Systems, Inc. A Guide to Installing OLI Software Page 12

13 Now try running the application by double clicking on the desktop or the program menu shortcut. If the OLI Security Error dialog box appears then please contact OLI Systems Support ( ext. 24) for assistance. OLI Systems, Inc. A Guide to Installing OLI Software Page 13

OLI Engine in Aspen Hysys

OLI Engine in Aspen Hysys OLI Engine in Aspen Hysys This document applies to all versions of Aspen Hysys V7.3 to V8.8 The OLI Engine in Aspen Hysys includes OLI physical property databanks and OLI licensing and security components

More information

GP-N100 Utility Software Manual

GP-N100 Utility Software Manual System Requirements En Thank you for your purchase of a GP-N100. This manual describes how to use the GP-N100 Utility to download the latest assisted GPS data from Nikon servers to your GP-N100. To ensure

More information

Windows Download & Installation

Windows Download & Installation BrokerMetrics / AgentMetrics Instructions for a New Installation Windows Download & Installation... 1 Macintosh Download & Installation... 6 Troubleshooting... 10 How to verify your installation... 11

More information

3M Occupational Health and Environmental Safety 3M E-A-Rfit Validation System. Version 4.4 Software Installation Guide (Full) 1 P age

3M Occupational Health and Environmental Safety 3M E-A-Rfit Validation System. Version 4.4 Software Installation Guide (Full) 1 P age 3M Occupational Health and Environmental Safety 3M E-A-Rfit Validation System Version 4.4 Software Installation Guide (Full) 1 P age Contents Important Information Read First... 3 Software Installation

More information

EMS Installation. Workstation Requirements CHAPTER. EMS Lite (Windows 95/98) EMS NT (Windows NT 4.0)

EMS Installation. Workstation Requirements CHAPTER. EMS Lite (Windows 95/98) EMS NT (Windows NT 4.0) CHAPTER 2 EMS Installation This chapter provides instructions for installing the Element Management System (EMS) software on a user workstation. Workstation Requirements The following sections list the

More information

PropertyBoss Upgrade

PropertyBoss Upgrade Installation Guide EMC128-2013 1998-2013 PropertyBoss Solutions. Introduction This document covers 2 upgrade scenarios. Please determine which is required before beginning. Note: The Release version or

More information

Startfish driver installation is a two step process for Windows operating systems.

Startfish driver installation is a two step process for Windows operating systems. Installation Windows Minimum System Requirements Windows XP (Service Pack 1) Intel Pentium III or equivalent processor 128MB of ram USB 2.0 Port (The camera will not work on a standard USB 1.1 port) Startfish

More information

DRAWings 8 and Wings modular 8 Embroidery Software INSTALLATION GUIDE

DRAWings 8 and Wings modular 8 Embroidery Software INSTALLATION GUIDE DRAWings 8 and Wings modular 8 Embroidery Software INSTALLATION GUIDE We thank you for purchasing DRAWings 6 and Wings modular 5 software. We are committed to providing you with the most innovative technology.

More information

IT IS VERY IMPORTANT TO KNOW WHAT VERSION OF WINDOWS YOUR COMPUTER IS CURRENTLY RUNNING BEFORE YOU BEGIN YOUR SERVANT KEEPER INSTALLATION!!

IT IS VERY IMPORTANT TO KNOW WHAT VERSION OF WINDOWS YOUR COMPUTER IS CURRENTLY RUNNING BEFORE YOU BEGIN YOUR SERVANT KEEPER INSTALLATION!! SK Help Network Help Sheets-Server and Workstation Installation This is a GENERAL Servant Keeper Network Installation help sheet. If you need further assistance, please contact your network administrator.

More information

DCAMCUT for AutoCAD / Mechanical Desktop. Installation Instructions Version 5.0

DCAMCUT for AutoCAD / Mechanical Desktop. Installation Instructions Version 5.0 DCAMCUT for AutoCAD / Mechanical Desktop Installation Instructions Version 5.0 1 1.1 System Requirements Hardware Requirements Pentium IV, higher or compatible processor. CPU 1.5 GHz 1 GB RAM 750 MB free

More information

Copyright Autodesk, Inc.

Copyright Autodesk, Inc. Customer and Administration Building, Ditzingen, Germany - Design by Barkow Leibinger Architects Copyright 2003-2008 Autodesk, Inc. Table of Contents 1 Introduction... 3 What is Facility Manager?... 3

More information

Installation Guide. Version 2600

Installation Guide. Version 2600 Installation Guide Version 2600 Before You Start Check here to see that your PC has what it needs to run FedEx Ship Manager Software: Minimum System and Hardware Requirements Intel Pentium 4, 2.4 GHz recommended

More information

Mailbox Manager Getting Started Guide. Licensing Installation Options System Requirements Installation Instructions

Mailbox Manager Getting Started Guide. Licensing Installation Options System Requirements Installation Instructions Mailbox Manager Getting Started Guide Licensing Installation Options System Requirements Installation Instructions Mailbox Manager Release 5.4 December 2006 Table of Contents Introduction... 1 Licenses...

More information

Software Package Installation Instructions

Software Package Installation Instructions Introduction Novar provides an automatic installation package that involves reading simple, easy-to-follow instructions on each screen and clicking on the appropriate options. This document provides detailed

More information

IMC Intelligent Analysis Report v7.1 (E0301P02) Copyright (c) 2015 Hewlett-Packard Development Company, L.P. and its licensors.

IMC Intelligent Analysis Report v7.1 (E0301P02) Copyright (c) 2015 Hewlett-Packard Development Company, L.P. and its licensors. IMC Intelligent Analysis Report v7.1 (E0301P02) Copyright (c) 2015 Hewlett-Packard Development Company, L.P. and its licensors. Table of Contents 1. What's New in this Release 2. Problems Fixed in this

More information

Fleet Manager 2002 Professional Network Configuration Guide

Fleet Manager 2002 Professional Network Configuration Guide Handling a complex world. Fleet Manager 2002 Professional Network Configuration Guide Overview The VDO Fleet Manager Professional utilises an advanced three-tier client-server model and is designed to

More information

QUICKBOOKS PRO 2009 INSTALLING QUICKBOOKS PRO AND STUDENT DATA FILES

QUICKBOOKS PRO 2009 INSTALLING QUICKBOOKS PRO AND STUDENT DATA FILES QUICKBOOKS PRO 2009 INSTALLING QUICKBOOKS PRO AND STUDENT DATA FILES Installing QuickBooks Pro 2009 Software Before installing the software, verify that your computer meets the following minimum system

More information

INSTALLING THE PS3 XBOX READY SOFTWARE:

INSTALLING THE PS3 XBOX READY SOFTWARE: INSTALLING THE PS3 XBOX READY SOFTWARE: 1. Insert the Installation CD to CD-ROM drive and execute Ready_Setup.exe NOTE: If it is the first time for the target USB disk using under this software, the software

More information

AIS Server Installation Guide

AIS Server Installation Guide AIS Server Installation Guide Table of Contents Overview of AIS Server... 1 System Requirements... 3 Installation Sequence... 4 Installing SQL Server 2005 Express Edition... 5 Configuring SQL Server 2005

More information

KG-TOWER Software Download and Installation Instructions

KG-TOWER Software Download and Installation Instructions KG-TOWER Software Download and Installation Instructions Procedures are provided for three options to download and install KG-TOWER software version 5.1. Download to a temporary folder and install immediately.

More information

GRAMS Suite Version 9.1

GRAMS Suite Version 9.1 Thermo Scientific GRAMS Suite Version 9.1 Welcome Guide Revision A 2011 Thermo Fisher Scientific Inc. All rights reserved. Thermo Fisher Scientific Inc. provides this document to its customers with a product

More information

Galileo Desktop SM 2.1. Installation Guide

Galileo Desktop SM 2.1. Installation Guide Galileo Desktop SM 2.1 Installation Guide Galileo Desktop SM 2.0 Installation Guide, January 2007 i 2008 Galileo International, L.L.C. All rights reserved. Information in this document is subject to change

More information

INSTALLATION AND USER GUIDE

INSTALLATION AND USER GUIDE INSTALLATION AND USER GUIDE Introduction 1 Introduction About 6140 Agent Portal Mitel Networks 6140 Agent Portal allows an agent to receive call information via a number of different applications that

More information

Batch Eligibility Long Term Care claims

Batch Eligibility Long Term Care claims DXC Technology Provider Electronic Solutions software lets Connecticut Medical Assistance Program providers verify patient s eligibility and submit and correct claims for services all electronically. The

More information

Goodwill Accounting 6

Goodwill Accounting 6 Goodwill Accounting 6 (Freeware) INDEX 1. Introduction 2. Product Information 3. Installation i. Contents ii. iii. Requirements Installation 4. Installation Guide i. Using Goodwill ii. iii. iv. Creating

More information

How to install the software of ZNS8022

How to install the software of ZNS8022 How to install the software of ZNS8022 1. Please connect ZNS8022 to your PC after finished assembly. 2. Insert Installation CD to your CD-ROM drive and initiate the auto-run program. The wizard will run

More information

Windows Network Server

Windows Network Server Windows Network Server The Client Explorer helps you manage all your client data files. Users on a network can share the same database so that the index is constantly up-to-date for all to see, and files

More information

Mercury QuickTest Professional. Installation Guide Version 9.0

Mercury QuickTest Professional. Installation Guide Version 9.0 Mercury QuickTest Professional Installation Guide Version 9.0 Mercury QuickTest Professional Installation Guide, Version 9.0 This manual, and the accompanying software and other documentation, is protected

More information

ChromQuest 4.2 Chromatography Data System

ChromQuest 4.2 Chromatography Data System ChromQuest 4.2 Chromatography Data System Installation Guide CHROM-97200 Revision A April 2005 2006 Thermo Electron Corporation. All rights reserved. Surveyor is a registered trademark and ChromQuest is

More information

Installing ProjectSpec from the ProjectMatrix DVD

Installing ProjectSpec from the ProjectMatrix DVD Installing ProjectSpec from the ProjectMatrix DVD System Requirements Operating System: Windows 2000, XP (Home or Pro) or Vista (32-bit version) Software: AutoCAD 2004 through 2009 (ProjectMatrix's policy

More information

User Guide. PCmover Professional for Windows XP. Laplink Software, Inc. User Guide MN-PCMPRO-XP-EN-08 (REV. 2014/07/08)

User Guide. PCmover Professional for Windows XP. Laplink Software, Inc. User Guide MN-PCMPRO-XP-EN-08 (REV. 2014/07/08) 1 PCmover Professional The Only Software that Moves Programs, Files, and Settings to a New PC! Laplink Software, Inc. Customer Service/Technical Support: Web: http://www.laplink.com/contact E-mail: CustomerService@laplink.com

More information

QUICKBOOKS PRO 2008 INSTALLING QUICKBOOKS PRO AND STUDENT DATA FILES

QUICKBOOKS PRO 2008 INSTALLING QUICKBOOKS PRO AND STUDENT DATA FILES QUICKBOOKS PRO 2008 INSTALLING QUICKBOOKS PRO AND STUDENT DATA FILES Installing QuickBooks Pro 2008 Software Before installing the software, verify that your computer meets the following minimum system

More information

MYOB ODBC Direct. Installation Guide

MYOB ODBC Direct. Installation Guide MYOB ODBC Direct Installation Guide About MYOB ODBC Direct Copyright and Trademark Information MYOB ODBC Direct is an ODBC driver that makes your MYOB company file information accessible from other applications.

More information

Installing AppleWorks 6 FOR WINDOWS

Installing AppleWorks 6 FOR WINDOWS apple Installing AppleWorks 6 FOR WINDOWS 1 Installing AppleWorks 6 This booklet provides instructions for m installing and uninstalling AppleWorks m setting up an AppleWorks Installer on a server, so

More information

Index Introduction 3 Chapter 1. - Beginning the installation User License Application User Information 4

Index Introduction 3 Chapter 1. - Beginning the installation User License Application User Information 4 Index Introduction 3 Chapter 1. - Beginning the installation 1.1. - User License Application 4 1.2. - User Information 4 1.3. - Installation Folder 4 Chapter 2. - Standalone or Server Installation 2.1.

More information

Installation Instructions for Medisoft 15 Network Professional

Installation Instructions for Medisoft 15 Network Professional Installation Instructions for Medisoft 15 Network Professional WARNING: If you are installing over a previous version of Medisoft, it is very important that you back up your data. Refer to the Medisoft

More information

This is a GENERAL Servant Keeper Network Installation help sheet. If you need further assistance, please contact your network administrator.

This is a GENERAL Servant Keeper Network Installation help sheet. If you need further assistance, please contact your network administrator. SK Help Network Help Sheets - Workstation Installation This is a GENERAL Servant Keeper Network Installation help sheet. If you need further assistance, please contact your network administrator. Due to

More information

3M Molecular Detection System Software Upgrade/Installation Instructions

3M Molecular Detection System Software Upgrade/Installation Instructions User Manual Supplement Number: TB.342837.03 Effective Date: March 2018 Supersedes: TB.342837.02 Technology Platform: 3M Molecular Detection System Originating Location: St. Paul, MN 3M Molecular Detection

More information

HTC Magic Required Software Update

HTC Magic Required Software Update OVERVIEW THIS IS A CRITICAL SOFTWARE UPDATE PROVIDED BY HTC TO ENABLE 911 CALLING ON YOUR PHONE. And also provides the following enhancement: Introduces HTC Sense - an intuitive user interface You will

More information

Free. User Guide. Free. Laplink Software, Inc. User Guide MN-PCMFREE-EN-08 (REV. 2/2013)

Free. User Guide. Free. Laplink Software, Inc. User Guide MN-PCMFREE-EN-08 (REV. 2/2013) 1 Free Laplink Software, Inc. Customer Service/Technical Support: Web: http://www.laplink.com/contact E-mail: CustomerService@laplink.com Laplink Software, Inc. 600 108th Ave. NE, Suite 610 Bellevue, WA

More information

Kinetica 5.1 Kinetica Installation Guide

Kinetica 5.1 Kinetica Installation Guide Kinetica 5.1 Kinetica Installation Guide 2012 Thermo Fisher Scientific Inc. All rights reserved. The information in this document is subject to change without notice and should not be construed as a commitment

More information

Installing the WinSCP Secure FTP Client

Installing the WinSCP Secure FTP Client Draft 0.9 Page 1 of 6 Installing the WinSCP Secure FTP Client This document will instruct you to install the WinSCP application that will provide Secure FTP (SFTP) access to your website folder. So why

More information

Windows XP Software Installation Instructions GCC Elite Series Printers

Windows XP Software Installation Instructions GCC Elite Series Printers TM Windows XP Software Installation Instructions GCC Elite Series Printers This document is intended to provide instructions for obtaining and installing the Windows XP driver software for GCC s Elite

More information

USB driver and Software Installation. UPS Monitoring and Management Software

USB driver and Software Installation. UPS Monitoring and Management Software USB driver and Software Installation UPS Monitoring and Management Software LEN.MAN.SOF.143 Rev.1.00/2008 Installing USB driver and Easy-Mon X for LEONICS UPS 1. Installing and uninstalling the USB driver

More information

KD Max V5 Upgrade & Installation Guidance For upgrade users KD Max V5 Upgrade & Installation Guidance

KD Max V5 Upgrade & Installation Guidance For upgrade users KD Max V5 Upgrade & Installation Guidance KD Max V5 Upgrade & Installation Guidance 1 / 12 Contents Part 1: Upgrade keylock to KD Max V5.0...3 Part 2: System installation and configuration 6 Part 3: Installing KD Max V5.0. 8 Part 4: Activate your

More information

3. IMPORTANT: When prompted, accept the default Installation directory.

3. IMPORTANT: When prompted, accept the default Installation directory. Installing ProView 4.0.1 on your PC 1. Insert the ProView 4.0.1 CD-ROM into your CD-ROM Drive. The Install Shield Wizard should run automatically. If it does not, click Start then Run. Enter D:\setup.exe

More information

Windows NT Server Printer Driver Upgrade Instructions

Windows NT Server Printer Driver Upgrade Instructions Windows NT Server Printer Driver Upgrade Instructions The steps detailed below describe the most reliable method to upgrade printer driver versions after v1.6.0227a on a Windows NT 4.0 Server that is shared

More information

TravelerSafe Plus User s Manual

TravelerSafe Plus User s Manual TravelerSafe Plus User s Manual TravelerSafe Plus (TravelerSafe+) is a DataTraveler Elite tool that enables you to create and access a user defined password-protected area called a Privacy Zone, on your

More information

Installation and Upgrade Guide Zend Studio 7.0

Installation and Upgrade Guide Zend Studio 7.0 Installation and Upgrade Guide Zend Studio 7.0 By Zend Technologies, Inc. www.zend.com Table of Contents System Requirements... 3 Installing Zend Studio... 4 Migrating to Zend Studio 7.x from Zend Studio

More information

Installing FileMaker Pro 11 in Windows

Installing FileMaker Pro 11 in Windows Installing FileMaker Pro 11 in Windows Before you begin the installation process, please exit other open programs and save your work. Installation notes Before you install FileMaker Pro, review the following

More information

Samsung Moment Update Instructions Updated

Samsung Moment Update Instructions Updated Samsung Moment Update Instructions Updated 10.06.10 It is important that you follow these instructions to ensure your device is updated properly. Requirements for Performing Upgrade You will need the following

More information

Installing Lotus Notes on Your Computer Lotus Notes release (Standard and Basic versions)

Installing Lotus Notes on Your Computer Lotus Notes release (Standard and Basic versions) Installing Lotus Notes on Your Computer Lotus Notes release 8.0.1 (Standard and Basic versions) You can install Lotus Notes on your PC just as you would install any other software. You may download the

More information

GWCommander V3.x. Administrators Guide

GWCommander V3.x. Administrators Guide GWCommander V3.x Administrators Guide OpenNet Software Ltd., January 2006 OpenNet Software Ltd. GWCommander v.3 Admin Guide, Page 1 Table of Contents 1. Introduction...2 1.1 Requirements...3 2. Setting

More information

Version 2.8. Installation Guide

Version 2.8. Installation Guide Version 2.8 Installation Guide Copyright 2010 Pearson Education, Inc. or its affiliate(s). All rights reserved. ELLIS is a registered trademark, in the U.S. and/or other countries, of Pearson Education,

More information

Installing and Setting Up the Snap-on EPC. Rev.1.6 (12 Apr 2012) PN EN

Installing and Setting Up the Snap-on EPC. Rev.1.6 (12 Apr 2012) PN EN Installing and Setting Up the Snap-on EPC Rev.1.6 (12 Apr 2012) PN 275-0800-EN Table of Contents 1. Introduction... 3 2. Minimum Requirements... 4 3. Installing the Snap-on EPC... 6 4. Licensing the Snap-on

More information

GRAMS Suite Version 9.0

GRAMS Suite Version 9.0 Thermo Scientific GRAMS Suite Version 9.0 Welcome Guide Revision A 2010 Thermo Fisher Scientific Inc. All rights reserved. Thermo Fisher Scientific Inc. provides this document to its customers with a product

More information

Gamco Installation Guide for Worksheet Magic Plus. Version 4.5 WINDOWS and MAC OS X

Gamco Installation Guide for Worksheet Magic Plus. Version 4.5 WINDOWS and MAC OS X Gamco Installation Guide for Worksheet Magic Plus Version 4.5 WINDOWS and MAC OS X Dear Educator, Thank you for purchasing a Gamco product. Our programs succeed in classrooms and computer labs because

More information

Installation Instructions Version 6.0

Installation Instructions Version 6.0 DCAMCUT 6.0 for thinkdesign / hypercad Installation Instructions Version 6.0 1 1.1 System Requirements Hardware Requirements Pentium IV, higher or compatible processor. CPU 1.5 GHz 1 GB RAM 750 MB free

More information

3 INSTALLING WINDOWS XP PROFESSIONAL

3 INSTALLING WINDOWS XP PROFESSIONAL INSTALLING WINDOWS XP PROFESSIONAL.1 Preparing for installation Objectives.1.1 Windows XP Professional Hardware Requirements.1.2 Hardware Compatibility List (HCL) check.1. Hard Disk Partition.1.4 Required

More information

Installation Instructions

Installation Instructions Installation Instructions Casting Simulation Software Version 3.2 for Windows XP and Windows Vista Version 2009-03-24 Installation and Licensing Upgrading Existing FLOW-3D Cast Installation 1) Copy FLOW-3D

More information

LiteShow WIRELESS FREEDOM FOR YOUR PROJECTOR. QUICK START GUIDE

LiteShow WIRELESS FREEDOM FOR YOUR PROJECTOR. QUICK START GUIDE LiteShow WIRELESS FREEDOM FOR YOUR PROJECTOR. QUICK START GUIDE InFocus LiteShow Quick Start Guide 1 This InFocus LiteShow Quick Start Guide contains the four simple steps you need to perform in order

More information

Acronis Backup & Recovery 11 Beta Advanced Editions

Acronis Backup & Recovery 11 Beta Advanced Editions Acronis Backup & Recovery 11 Beta Advanced Editions Quick Start Guide Table of contents 1 Main components... 3 2 Supported operating systems... 3 3 Where do I install the components?... 3 4 What you need

More information

Sage 500 ERP Business Intelligence

Sage 500 ERP Business Intelligence Sage 500 ERP Business Intelligence Installation Guide Version 1 Table of Contents System Requirements... 1 Recommended System Requirements... 1 Database Connectivity Supported... 1 Sage 500 ERP Business

More information

This section provides you with information for installing P-CAD products and modifying a P-CAD installation.

This section provides you with information for installing P-CAD products and modifying a P-CAD installation. P-CAD 2001 Installation Instructions Network Edition ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

More information

Panaboard Overlayer User's Guide. Image Capture Software for Electronic Whiteboard (Panaboard)

Panaboard Overlayer User's Guide. Image Capture Software for Electronic Whiteboard (Panaboard) Panaboard Overlayer User's Guide Image Capture Software for Electronic Whiteboard (Panaboard) Contents Introduction... 3 Functional Overview... 3 Operation Flow... 3 Abbreviations... 4 Trademarks... 4

More information

GraffixPro Studio Getting Started Guide

GraffixPro Studio Getting Started Guide GraffixPro Studio Getting Started Guide The GraffixPro Studio Software is comprised of a set of linked applications: the Administrator, the Library, and the design software. This guide outlines the procedures

More information

Welcome In this chapter

Welcome In this chapter 1 Welcome In this chapter Welcome to ProWORX NxT 2.10 2 Installing ProWORX NxT 3 Starting ProWORX NxT 5 Authorizing ProWORX NxT 8 Customer support 11 ProWORX NxT User s Guide Welcome to ProWORX NxT 2.10

More information

USB SERIAL ADAPTOR COM PORT INSTRUCTIONS

USB SERIAL ADAPTOR COM PORT INSTRUCTIONS USB SERIAL ADAPTOR COM PORT INSTRUCTIONS No part of this work covered by the copyright hereon may be reproduced, copied, transferred or distributed in any form or by any means -- graphic, electronic, or

More information

EDS Attn: EDI Unit P.O. Box 2991 Hartford, CT

EDS Attn: EDI Unit P.O. Box 2991 Hartford, CT EDS Provider Electronic Solutions software lets Connecticut Medical Assistance providers verify patient s eligibility and submit and correct claims for services all electronically. The software makes submitting

More information

Installing and Setting Up the Snap-on EPC. Rev.1.10 (10 Oct 2013) PN EN

Installing and Setting Up the Snap-on EPC. Rev.1.10 (10 Oct 2013) PN EN Installing and Setting Up the Snap-on EPC Rev.1.10 (10 Oct 2013) PN 275-0800-EN Table of Contents 1. Introduction... 3 2. Minimum Requirements... 4 3. Installing the Snap-on EPC... 6 4. Licensing the Snap-on

More information

Function Point WORKBENCH Release 7.0k INSTALLATION GUIDE TABLE OF CONTENTS

Function Point WORKBENCH Release 7.0k INSTALLATION GUIDE TABLE OF CONTENTS Function Point WORKBENCH Release 7.0k GUIDE TABLE OF CONTENTS FUNCTION POINT WORKBENCH RELEASE 7.0K GUIDE... 1 LICENCE TYPES... 3 Standalone Licence Machine Dependent (Single User)... 3 Network Licence

More information

Freshservice Discovery Probe User Guide

Freshservice Discovery Probe User Guide Freshservice Discovery Probe User Guide 1. What is Freshservice Discovery Probe? 1.1 What details does Probe fetch? 1.2 How does Probe fetch the information? 2. What are the minimum system requirements

More information

Geomatica 10.2 Stand Alone Installation Procedures

Geomatica 10.2 Stand Alone Installation Procedures Geomatica 10.2 Stand Alone Installation Procedures TUTORIAL The purpose of this tutorial is to provide you with a friendly and easy to follow step-by-step guide for the stand alone installation of PCI

More information

Pursuit 7 for Windows

Pursuit 7 for Windows Pursuit 7 for Windows Proposal Generation System Z-Micro Technologies, Inc. Installation Guide Copyright 2010. Z-Micro Technologies, LLC. All Rights Reserved. Setting Up Pursuit 7 for Windows - Client

More information

New Dealership TeamDesign Installation Instructions

New Dealership TeamDesign Installation Instructions New Dealership TeamDesign Installation Instructions This document describes how to install the TeamDesign software for the first time. It is very important that you read this document completely before

More information

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version 2009.1 2009 Sage Software, Inc. All rights reserved. Published by Sage 2325 Dulles Corner

More information

magicolor DL Series Firmware Updater Guide A A

magicolor DL Series Firmware Updater Guide A A magicolor DL Series Firmware Updater Guide 4138-7795-01A 1760673-001A System Requirements Computer: PC with a Pentium 2, 400 MHz or faster processor (A Pentium 3, 500 MHz or faster processor is recommended.)

More information

Version 4.1 Software Installation Guide (Full)

Version 4.1 Software Installation Guide (Full) Version 4.1 Software Installation Guide (Full) Important! Read First You must have administrative rights to install the E-A-Rfit software and the drivers for the hardware (speaker). Ensure your PC meets

More information

Home. User Guide. Home. Laplink Software, Inc. User Guide MN-PCMHOME-EN-08 (REV. 1/15/2014)

Home. User Guide. Home. Laplink Software, Inc. User Guide MN-PCMHOME-EN-08 (REV. 1/15/2014) 1 Home Laplink Software, Inc. Customer Service/Technical Support: Web: http://www.laplink.com/contact E-mail: CustomerService@laplink.com Laplink Software, Inc. 600 108th Ave. NE, Suite 610 Bellevue, WA

More information

Intuition by LG Software Update

Intuition by LG Software Update Overview For the Intuition by LG, there are 3 convenient ways to install the software upgrade. Here are a few facts to keep in mind: It will take you approximately 15-25 minutes to download the software,

More information

Mercury WinRunner. Installation Guide Version 9.2. Document Release Date: February 26, 2007

Mercury WinRunner. Installation Guide Version 9.2. Document Release Date: February 26, 2007 Mercury WinRunner Installation Guide Version 9.2 Document Release Date: February 26, 2007 Mercury WinRunner Installation Guide, Version 9.2 This document, and the accompanying software and other documentation,

More information

Virtual Workplace Personal Device Client Installation Instructions

Virtual Workplace Personal Device Client Installation Instructions Virtual Workplace Personal Device Client Installation Instructions 1 Table of Contents About this Installation Guide... 3 Client Overview... 3 VMware Horizon View Clients... 3 UniPrint Clients... 3 Client

More information

OLI Chemistry Wizard 9.5 User Guide

OLI Chemistry Wizard 9.5 User Guide OLI Chemistry Wizard 9.5 User Guide Updated August 17, 2017 OLI Chemistry Wizard is a Windows wizard-style application that leads you through the process of creating an OLI chemistry model file and associated

More information

PAL Installation Instructions

PAL Installation Instructions PAL Installation Instructions ADMINISTRATOR (NETWORK) INSTALLS These instructions are for PCs that are connected by a network, for the purpose of sharing PAL data and notes. PAL can be installed using

More information

Table of Contents. D-Link SharePort Plus... 4 Introduction...4 System Requirements...4 Features...5. Installation... 6

Table of Contents. D-Link SharePort Plus... 4 Introduction...4 System Requirements...4 Features...5. Installation... 6 Table of Contents D-Link SharePort Plus... 4 Introduction...4 System Requirements...4 Features...5 Installation... 6 SharePort Plus Utility... 11 Utility Overview... 11 Device Server View... 12 Utility

More information

PlexService 2.5 Installation Guide

PlexService 2.5 Installation Guide PlexService 2.5 Installation Guide Copyright 2000-2003 K-Plex Inc. All rights reserved Page 1 Table of Contents 1 Introduction... 3 2 System Requirements... 4 2.1 Hardware... 4 2.2 Software... 4 3 Installation...

More information

SWCS 4.2 Server Manager Users Guide Revision /22/2012 Solatech, Inc.

SWCS 4.2 Server Manager Users Guide Revision /22/2012 Solatech, Inc. SWCS 4.2 Server Manager Users Guide Revision 39 10/22/2012 Solatech, Inc. Contents Introduction... 5 Installation... 5 Installing on a server with the Solatech Window Covering Software... 5 Running the

More information

USB SERIAL ADAPTOR COM PORT INSTRUCTIONS

USB SERIAL ADAPTOR COM PORT INSTRUCTIONS USB SERIAL ADAPTOR COM PORT INSTRUCTIONS No part of this work covered by the copyright hereon may be reproduced, copied, transferred or distributed in any form or by any means -- graphic, electronic, or

More information

Secure Single Sign On with FingerTec OFIS

Secure Single Sign On with FingerTec OFIS Secure Single Sign On with FingerTec OFIS User Guide CONTENTS 3 1 INTRODUCTION Welcome to OFIS Gateway 4-11 2 INSTALLATION & SETUP Registering Your OFIS Gateway Installing & Setting Up Your OFIS Gateway

More information

N2KAnalyzer. User s Manual

N2KAnalyzer. User s Manual N2KAnalyzer NMEA 2000 Network Analysis Software User s Manual Revision 1.3.9 Copyright 2008 Maretron, LLP All Rights Reserved Maretron, LLP 9014 N. 23 rd Ave #10 Phoenix, AZ 85021-7850 http://www.maretron.com

More information

VERTECH. VERTECH Central Station Software Installation Manual

VERTECH. VERTECH Central Station Software Installation Manual VERTECH Central Station Software Installation Manual Installation Manual July 2006 1 Table of Contents 1.0 Introduction... 3 2.0 Vertx Access Control System 1.0 Installation Guide... 3 3.0 Vertx Access

More information

Xactimate 25 Demo Request

Xactimate 25 Demo Request 1 Xactimate 25 Demo Request PREFACE: This document has been created with the intent to teach an adjuster how to request a demo from Xactware in preparation of Amcat training. This is a prerequisite that

More information

DCAMCUT in thinkdesign / hypercad. Installation Instructions Version 5.0

DCAMCUT in thinkdesign / hypercad. Installation Instructions Version 5.0 DCAMCUT in thinkdesign / hypercad Installation Instructions Version 5.0 1 1.1 System Requirements Hardware Requirements Pentium IV, higher or compatible processor. CPU 1.5 GHz or higher 1 GB RAM or higher

More information

LiNC-NXG for Windows 8 Professional, Windows 7 Professional, Vista Business Edition and XP Professional

LiNC-NXG for Windows 8 Professional, Windows 7 Professional, Vista Business Edition and XP Professional LiNC-NXG for Windows 8 Professional, Windows 7 Professional, Vista Business Edition and XP Professional Installation Guide for LiNC-NXG 33-10067-001 REV: C PCSC 3541 Challenger Street Torrance, CA 90503

More information

1) Installing Bluetooth software for Windows (A) Place installation CD into PC and setup should launch automatically.

1) Installing Bluetooth software for Windows (A) Place installation CD into PC and setup should launch automatically. 1) Installing Bluetooth software for Windows (A) Place installation CD into PC and setup should launch automatically. If setup does not launch, use Windows Explorer to navigate to the appropriate CD- ROM

More information

This guide provides instructions in the installation and configuration of XrayVision DCV.

This guide provides instructions in the installation and configuration of XrayVision DCV. Apteryx Inc. 313 S. High St. Suite 200 Akron, OH 44308 330-376-0889 voice 330-376-0788 fax sales@apteryx.com www.apteryx.com XrayVision DICOM Capture View (DCV) Installation Guide Abstract Abstract Abstract

More information

This installation guide is intended for customers who are installing NMIS for the first time. Included are the recommended hardware specifications

This installation guide is intended for customers who are installing NMIS for the first time. Included are the recommended hardware specifications This installation guide is intended for customers who are installing NMIS for the first time. Included are the recommended hardware specifications and sample screens to guide you through the installation

More information

Installation and Removal

Installation and Removal Installation and Removal Table of Contents IMPORTANT READ FIRST BEFORE INSTALLATION 102 Single-user Installation 103 Network Installation 106 Removal of X-Ray 3.0 108 101 IMPORTANT: Read these instructions

More information

Stand-Alone Installation Guide and Getting Started with Autodesk Ecotect Analysis

Stand-Alone Installation Guide and Getting Started with Autodesk Ecotect Analysis Autodesk Ecotect Analysis 2010 Stand-Alone Installation Guide and Getting Started with Autodesk Ecotect Analysis This document describes how to install and activate Autodesk Ecotect Analysis 2010 software

More information

1 System Requirements Obtaining editariff Download the CD image Request a DVD... 4

1 System Requirements Obtaining editariff Download the CD image Request a DVD... 4 Contents 1 System Requirements... 2 2 Obtaining editariff... 3 2.1 Download the CD image... 3 2.2 Request a DVD... 4 3 Integrating editariff with CargoWise One... 5 3.1 Why integrate?... 5 3.2 How to Install

More information