Airmar B75 transducer compatibility with BSM-3
|
|
- Dustin Allen
- 6 years ago
- Views:
Transcription
1 TB-116 / August 5, 2015 Airmar B75 transducer compatibility with BSM-3 Product: , , , , , , Product Description: Airmar B75 and BSM-3 Software Version: ALL Effective Date: July 2015 Inspect/Update Current Inventory: No Airmar B75 Wiring All Navico Airmar B75 transducers shipping with the blue 7-pin connector have been hardwired for connection to SonarHub modules. This wiring does not match the required wiring for connection to the connectors on Simrad BSM-3 modules. If directly connected to the port on a BSM-3, an Airmar B75 will fail to report its XID and temperature readings to the BSM-3. It is recommended to cut off the hard-wired blue 7-pin connector attached to the B75 and use the wires inside the cable to wire it directly to the terminal blocks inside the BSM-3, thus bypassing the connectors on the module. This does not affect other models of Airmar transducers. For connecting the bare wires, follow this diagram: ORANGE WHITE ORANGE WHITE BROWN & SHIELD OUTER SHIELD BLUE INNER BLACK BROWN & SHIELD OUTER BLUE/ SHIELD WHITE INNER BLACK/ WHITE B75H B75M B75L Page 1 of 2
2 For More Information: U.S. Based Resellers Technical and Order Support: (800) Canada Based Resellers Technical Support: (855) You may also send any inquiries via to the addresses listed below, according to your salesgroup classification: OEM/Boatbuilder International/Latin America National Retail Dealers/Distributors Page 2 of 2
3 TB-117 / August 5, 2015 HDS Gen2 Touch and Gen3 Autopilot VRF Calibration Using Keypad Product: Product Description: HDS Gen2 Touch / HDS Gen3 Software Version: HDS Gen2 Touch 4.5 / HDS Gen3 2.0 Effective Date: July 9, 2015 Inspect/Update Current Inventory: NO This bulletin is to announce an alternate method of completing the Virtual Rudder Feedback (VRF) calibration for the Lowrance Outboard Pilot using an HDS Gen2 Touch or HDS Gen3. VRF Calibration is a critical step in commissioning the new Outboard Pilot, as shown in this video: Lowrance Outboard Pilot Commissioning To date, all instructions on this refer to using the onscreen buttons for completing this process; however, we have learned that some users are having issues with this method. For those who cannot complete the onscreen calibration, you may alternately complete the calibration by pressing and holding the + key on your physical keypad. When you get to this step in the commissioning process: Instead of pressing and holding Turn to Port on the screen, you may instead press and hold the + key on the keypad. Page 1 of 2
4 For More Information: U.S. Based Resellers Technical and Order Support: (800) Canada Based Resellers Technical Support: (855) You may also send any inquiries via to the addresses listed below, according to your salesgroup classification: OEM/Boatbuilder International/Latin America National Retail Dealers/Distributors Page 2 of 2
5 TB-118 / August 5, 2015 Zeus 2 RTM 3.0 Software Release Product: Zeus 2 and Zeus 2 Glass Helm processors Product Description: All Zeus 2 Multi-Function Displays (MFD) All Zeus 2 Glass Helm Processors Software Version: Zeus2_W r1 Zeus2_Black_Box r1 Effective Date: July 2015 Inspect/Update Current Inventory: Yes B&G is pleased to announce that new software has been released for all Zeus 2 multifunction displays. This is a major release that incorporates some great new features and improvements. The software, Zeus2_W r1-Standard-1.upd or Zeus2_Black_Box r1-standard-1.upd, can be downloaded from the Zeus 2 downloads page on the B&G website New Features Race Panel Race Panel contains a new set of race specific features available directly from the Home page or within a panel. Race Panel adds: Integration with H5000 Start Line feature New Scaled Start Line View with 1 boat length grid and zero burn line for the perfect start (H5000 systems only) "What If?" panel to allow assessment of wind changes on strategy (all systems with relevant data, H5000 systems use polar data if available) Start Line is also available to overlay on Chart panels for complete navigational awareness Race Timer view/control Page 1 of 4
6 Wind Phase Added Mean TWD data - TWD averaged over time period Added Wind Phase - difference between TWD and Mean TWD Added Lift/Header - Wind Phase adjusted to be relative to current tack All available as data items for display Expanded H5000 system support H5000 CPU Settings available via Zeus H5000 CPU IP address available via Zeus Added full support, including commissioning, for H5000 Pilot Waypoint/Route enhancements Route summary includes TWA for each leg Option to enter waypoints via range/bearing added Added Windward/Leeward quick course builder feature New instrument panels 3 new instrument panels added for full screen, 2-way and 4-way split screens Race Timer control Race Timer has been added to Trip Log page as an additional tab allowing all trip features to be controlled from one location Jeppesen MAX-N charting features Full-Featured Vector Charts: Chart detail including Depth Areas and Contours, Spot Soundings, NavAids, Light Sectors, Wrecks/Obstructions, Small Craft Facilities and more Aerial Photos: High-Definition Photos & Diagrams of ports, marinas and significant navigational marks Satellite: High-resolution satellite imagery provides real-world reference, enhances situational awareness for coastal navigation Custom Shaded Depths: Shaded depths make it easy to distinguish different water depths. Dynamic Raster: Traditional paper chart look with unique ability to access information on buoys, lights and other details Easy Routing: Automatically plots the shortest, safest route based on detailed chart data and vessel information. * Available only with MAX-N+ outside the Americas Tides & Currents: Presents the time, water level and direction of tides with Tide Level graphs and indicates predicted current time, direction and strength of currents with Current Flow graphs and colored arrows Harbor and Approach Details: Lets boaters approach any harbor and inlet with confidence Detailed Marina Port Plans: Docking in an unfamiliar port is no problem, when you have precise layouts of thousands of marinas, including slip spaces, restricted areas, and other valuable navigation information Page 2 of 4
7 Password protection for system settings RTM 3.0 includes an optional PIN protection feature for system settings, files and GoFree Shop access. A PIN code can be applied under HOME>SETTINGS>PIN CODE. The PIN code is a 4-digit number and if forgotten the user will either need to perform a hard reset or contact customer support for an unlock code. Fixes and Improvements Lockup on start up An issue was identified on some Zeus 2 displays that resulted in the unit reaching the boot splash screen, locking up then rebooting. This issue has been resolved in RTM 3.0. Touch screen improvements Improvements have been made to the touch screen drivers to resolve intermittent touch on some Zeus 2 displays. WIFI-1 software RTM-3.0 has an important integrated software upgrade for the WIFI-1 module. After RTM 3.0 has been installed, the Zeus 2 will update any WIFI-1 units on the Ethernet network. Follow the onscreen directions. Power cycle the WIFi-1 module after the upgrade. Ethernet network stability Radar: Improvements to Ethernet network connectivity to avoid the No Radar message sometimes encountered using 3G or 4G Radars. ForwardScan: Resolved an issue where in some circumstances ForwardScan would show No Source message. Note: If ForwardScan transducer is connected to a SonarHub. The SonarHub module will require an update. Download the file Sonar_Hub r1-Standard-1.riw at bandg.com. Power control setting The default (Factory Reset) setting for Power Control has now changed from Slave to Master. The setting change will apply to new factory units or when a v3.0 unit has been reset to factory defaults. Change in update procedure There is a slight change to the behavior of the update process. Once this update has been applied: The display will restart and will now bypass the Update selection menu Zeus 2 MFD: On some displays the unit will then perform a touch calibration. This will have a prompt not to touch the screen. This will take a few seconds and reboot afterwards. This step only happens during this update. Page 3 of 4
8 Known Issues Listed below are a number of issues we are aware of but were not fixed in time for this release. We are working hard to resolve these issues for the next release of software later in the year. Import of large user data files can cause a lowering of performance Persistent Jeppesen message appearing on start-up if C-MAP chart card is used Pulse radar Manual Tune settings not retained: Magnetron hours reported incorrectly SETTINGS > ADVANCED > FEATURES. Changes made are not retained after a power cycle Issues displaying Zeus 2 Glass Helm on to some third party monitors AIS TCPA/CPA information not appearing when used with some AIS receivers SonarHub settings do not persist after a power cycle Instances of dual chart split screen both with Sirius weather overlay over Navionics chart can cause an MFD to crash For More Information: U.S. Based Resellers Technical and Order Support: (800) Canada Based Resellers Technical Support: (855) You may also send any inquiries via to the addresses listed below, according to your salesgroup classification: OEM/Boatbuilder oem-bb@navico.com International/Latin America international@navico.com National Retail retail@navico.com Dealers/Distributors orders@navico.com Page 4 of 4
9 TB-119 / August 5, 2015 New B&G ZC1 Software Version Product: ZC1 Controller Product Description: Software Version: ZC1 1_4_00_00.swup Effective Date: August 2015 Inspect/Update Current Inventory: Yes B&G is pleased to announce a software upgrade for the ZC1 Wired Controller. The new version will supersede all previous versions. Version has changes that can improve the stability of NMEA 2000/SimNet networks especially large networks. The power consumption of the ZC1 has been considerably reduced from 5 LEN (240 ma) down to 2 LEN (85 ma). The ZC1 software version can be checked in the Network Device List. Click on the ZC1 display and view the Device Information. The new version should show Software Ver The new software is available from the bandg.com website. Upgrades can be performed via a B&G multi-function display or using the ST10 and SWUP program. Note: Apply the upgrade to one ZC1 unit at a time. For More Information: U.S. Based Resellers Technical and Order Support: (800) Canada Based Resellers Technical Support: (855) You may also send any inquiries via to the addresses listed below, according to your salesgroup classification: OEM/Boatbuilder oem-bb@navico.com International/Latin America international@navico.com Page 1 of 2
10 National Retail Dealers/Distributors Page 2 of 2
11 TB-120 / August 5, 2015 B&G ZM16 and 19 Monitor Software Release Product: ZM 16 and 19 monitors Product Description: ZM16-T, ZM19-T Software Version: ZM MCU 1_4_02_00.swup & ZM FSU 1_0_03_00.swup Effective Date: August 2015 Inspect/Update Current Inventory: Yes B&G is pleased to announce that new software has been released for the ZM range of widescreen monitors. This release incorporates some important improvements. The software upgrade is comprised of two upgrade files. One is for the BIOS or MCU (main control unit). The other is a FSU (Full System Update) which contains all three software components to update the Boot Loader, MCU and OSD (On Screen Display)" The two files MUST be installed in sequential order. First: Second: ZM MCU 1_4_02_00.swup ZM FSU 1_0_03_00.swup The two files will be rolled into one.zip file called ZM16_19_FSU_1_0_03_00.zip. The software can be downloads page on the B&G website Improvements Touch control Alarm Improvements have been made to the serial touch control to address reported issues of low sensitivity, intermittent touch, touch not working at startup, or taking a long time to become active. Resolves an issue where the monitors alarm buzzer continues to sound after the Zeus 2 GH processor has been powered off. Brightness control This software will resolve backlight dimming issues experienced by some users. Page 1 of 5
12 Upgrade Instructions Before commencing with the upgrade it is recommended that network traffic is minimized by depowering unnecessary devices such as AIS transponders, and multifunction displays. Upgrades must be performed dock side and not whilst the vessel is underway. Some NMEA 2000 devices will go into maintenance mode during the upgrade and will be off line. Make sure all monitors to be upgrades are connected to the NMEA 2000 network. Download the zipped software package from the B&G website Unzip the two files to the root of a media card (SD card for Zeus 2 GH, micro SD for Zeus 2 ) The Updaters can be run from any B&G MFD that is on the same NMEA 2000 network as the ZM Monitor. If there is another MFD other than a Zeus 2 GH it is recommended to run the updater from that MFD. How to check current versions Before upgrading please make a note of the current versions of the monitor. 1. Press the power button on the monitor to bring up the OSD (On Screen Display) 2. Press down arrow to select CONFIGURATION 3. The software versions in the example below are a. OSD b. BIOS Page 2 of 5
13 DO THIS FIRST! First run the BIOS updater file ZM MCU 1_4_02_00.swup Only apply this upgrade to one monitor at a time. (Multiple monitors on a network can be powered on but only one monitor at a time should be selected for upgrade). 1. Insert the media card into the card reader of an MFD or Zeus2 GH processor. 2. From the HOME page select FILES. 3. Select the media card that holds the upgrade files. 4. Select the upgrade file ZM MCU 1_4_02_00.swup. 5. Select UPGRADE to continue. 6. Select the monitor to upgrade (make sure only one is selected). Then select Start upgrade (OP40 press MENU> then select start upgrade). 7. The Upgrade process of the BIOS only takes a short time indicated by a process bar. 8. Once complete acknowledge upgrade successful message. Page 3 of 5
14 9. The LED on the monitor will continue to flash for approximately 45 seconds after which the monitor (not the Zeus 2 GH) will automatically restart. 10. Press X to exit installer page. 11. Apply to the next monitor. Second run the FSU updater file ZM FSU 1_0_03_00.swup Make sure you have upgraded the BIOS (MCU or later) as above. This Upgrade can be applied to multiple monitors on the network at the same time (up to six monitors). 1. Insert the media card in to the card reader of an MFD or Zeus2 GH processor. 2. From the HOME page select FILES. 3. Select the media card that holds the upgrade files. 4. Select the upgrade file ZM FSU 1_0_03_00.swup. 5. Select UPGRADE to continue. 6. Select the monitor(s) to upgrade (you can select up to six monitors at a time). Then select Start upgrade. 7. This process will take about twenty minutes to upgrade one monitor. Allow for an extra ten minutes for each additional monitor that is selected to be upgraded. Please be patient. It is important not to remove power to the system at this stage. 8. As each monitor is upgrading the red LED status light will flash. 9. Once complete acknowledge upgrade successful message. 10. The LED on the monitor will continue to flash for approximately 45 seconds after which the monitor (not the Zeus 2 GH) will automatically restart. 11. Press X to exit installer page. Page 4 of 5
15 Recheck the software versions After applying both upgrades. Recheck the version numbers. 1. Press the power button on the monitor to bring up the OSD (On Screen Display). 2. Press down arrow to select CONFIGURATION. 3. The new software versions displayed should be a. OSD Should now be b. The BIOS should now be For More Information: U.S. Based Resellers Technical and Order Support: (800) Canada Based Resellers Technical Support: (855) You may also send any inquiries via to the addresses listed below, according to your salesgroup classification: OEM/Boatbuilder International/Latin America National Retail Dealers/Distributors Page 5 of 5
The software and release notes can be downloaded from US/Support/Downloads/.
TB-97891 / October 4, 2017 NSS evo3 2.0 Software Update Product: NSS evo3 Multifunction displays Product Description: All NSS evo3 sizes Software Version: NSS_evo3-2.0-57.2.69-Standard-1.upd Effective
More informationZeus 2 RTM 3.5 Software Release
TB-155 / December 2015 Zeus 2 RTM 3.5 Software Release Product: Zeus 2 and Zeus 2 Glass Helm processors Product Description: All Zeus 2 Multi-Function Displays (MFD) All Zeus 2 Glass Helm Processors Software
More informationRelease Notes AVAILABLE JULY 2013
HDS GEN2 Touch 2.1.45.144 Software Update Release Notes AVAILABLE JULY 2013 HDS Gen2 Touch 2.1.45.144 Overview Recommended for all HDS Gen2 Touch displays Non-Touch Models only See Gen2 2.1.45.144 software
More informationSimrad Marine Electronics. Setup and Commissioning Instructions for Boatbuilders and Dealers
Simrad Marine Electronics Setup and Commissioning Instructions for Boatbuilders 18_8_2010 1. Introduction and Contents The purpose of this document is to set out, in clear and simple instructions, the
More informationRelease Notes AVAILABLE APRIL 2013
HDS GEN2 Touch 2.0.45.XXX Software Update Release Notes AVAILABLE APRIL 2013 HDS Gen2 Touch 2.0.45.XXX Overview Recommended for all HDS Gen2 Touch displays Touch Models only See Gen2 2.0.45.XXX software
More informationADDENDUM Vulcan sw releases 1.1, 2.0, 2.5 and 3.0
*988-11186-001* ADDENDUM Vulcan sw releases 1.1, 2.0, 2.5 and 3.0 www.bandg.com This addendum documents new features that are included in Vulcan software releases 1.1, 2.0, 2.5 and 3.0, and that are not
More informationZeus 2. Operator Manual ENGLISH. bandg.com
Zeus 2 Operator Manual ENGLISH bandg.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected
More informationADDENDUM GO7 sw releases 1.1, 2.0, 2.5, 3.0 and 3.5
*988-11573-001* ADDENDUM GO7 sw releases 1.1, 2.0, 2.5, 3.0 and 3.5 This addendum documents new features that are included in GO7 software releases 1.1, 2.0, 2.5, 3.0 and 3.5, and that are not described
More informationADDENDUM Vulcan7 sw releases 1.1, 2.0, 2.5, 3.0 and 3.5
*988-11562-001* ADDENDUM Vulcan7 sw releases 1.1, 2.0, 2.5, 3.0 and 3.5 This addendum documents new features that are included in Vulcan7 software releases 1.1, 2.0, 2.5, 3.0 and 3.5, and that are not
More informationGO XSE. Getting Started. simrad-yachting.com ENGLISH
GO XSE Getting Started ENGLISH simrad-yachting.com Contents 7 Introduction 7 The Home page 8 Application pages 10 Basic operation 10 System Controls dialog 10 Turning the system on and off 11 Selecting
More informationNSS evo2. Operator Manual ENGLISH
NSS evo2 Operator Manual ENGLISH Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected in this version
More information18.2 Software update (NOS 60)
18.2 Software update (NOS 60) Release notes Simrad Multifunction Display Software Update 18.2 Software versions and file names Model Ver Filename GO7 --.-- No updates available for this product GO5 XSE
More informationVulcan. Getting Started ENGLISH. bandg.com
Vulcan Getting Started ENGLISH bandg.com Vulcan Getting Started 3 4 Vulcan Getting Started Contents 9 Introduction 9 The Home page 10 Application pages 11 Integration of 3 rd party devices 12 GoFree wireless
More informationZeus 2. Operator Manual ENGLISH. bandg.com
Zeus 2 Operator Manual ENGLISH bandg.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected
More informationM A C 3 Wind Speed Alarm & Controller
M A C 3 Wind Speed Alarm & Controller Installation Instructions Thank you for purchasing the MAC3 wind speed alarm and controller. This manual is designed to lead you through a step-by-step process to
More informationNSS evo3 Quick Start Guide
NSS evo3 Quick Start Guide EN Front panel 2 3 4 5 6 7 8 9 10 11 12 12 1 No. Description 1 Touch screen. Pages/Home key - press to open the Home page for page selection and setup 2 options. WheelKey - user
More informationHDS Gen2 RTM 2.0, 2.5 & 3.0 addendum
HDS Gen2 RTM 2.0, 2.5 & 3.0 addendum This addendum documents new features included in the HDS Gen2 2.0, 2.5 and 3.0 software updates. These features are not described in the HDS Gen2 Operation manual.
More informationHDS Gen2 Touch Chartplotter Operator manual
HDS Gen2 Touch Chartplotter Operator manual ENGLISH lowrance.com Copyright 2013 Navico All Rights Reserved Lowrance and Navico are registered trademarks of Navico. Fishing Hot Spots is a registered trademark
More informationMoomba Boats PV480 Color Display
Moomba Boats PV480 Color Display 2018 Owner s Manual 1715055 2017-08-30 We continually strive to bring you the highest quality, full-featured products. As a result, you may find that your actual display
More informationB. HDS-5m & HDS-7m. GPS Mapping Receiver. Operations Guide
988-0176-02B HDS-5m & HDS-7m GPS Mapping Receiver Operations Guide Software updates for your unit. Occassionally check the Lowrance website for free software upgrades for your unit. Go to www.lowrance.com
More informationMAC3 Wind Speed Alarm & Controller. Installation Instructions
MAC3 Wind Speed Alarm & Controller Installation Instructions Table of Contents Overview... 3 Installation... 3 Optional Equipment... 10 Dual Sensor Operation... 10 Other Optional Equipment... 10 Operation
More informationHDS Carbon Operator Manual
HDS Carbon Operator Manual ENGLISH www.lowrance.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be
More informationNavigation Systems / Autopilot / Communications & Safety / Instruments
Navigation Systems / Autopilot / Communications & Safety / Instruments Go With Confidence Forover oversixty sixtyyears yearsthe the name SIMRAD has meant one thing: rock solid, high For name SIMRAD has
More informationMFD USER & INSTALLATION MANUAL. (Please check the Downloads section of our website for the latest manual)
MFD USER & INSTALLATION MANUAL (Please check the Downloads section of our website for the latest manual) A+T Instruments Ltd 235 Bentley Way LYMINGTON SO41 8JW UK Tel: +44 1590 718182 email: info@aandtinstrument.com
More informationZeus 2 QuickStart Guide
Zeus QuickStart Guide Font panel 7 units 9 & units 5 6 4 9 7 4 MARK 5 6 7 7 MARK 8 No. Description Touch screen Rotary knob. Rotate to scroll through menu items, then press to confirm a selection. Rotate
More informationExplorer 3 w/o GPS antenna Multifunction chartplotter
Explorer 3 w/o GPS antenna Multifunction chartplotter Multifunction chartplotter. The Explorer 3 is yet another improvement of the most reliable and affordable controller in the world. Product Description
More informationProduct Guide
2016-2017 Product Guide NSS evo2 NSS evo2 Chartplotter/Multifunction Display The NSS evo2 combines an easy-to-use chartplotter/multifunction display with built-in GPS positioning, StructureScan HD, CHIRPenabled
More informationHDS Gen2 Touch. Operator manual. lowrance.com ENGLISH
HDS Gen2 Touch Operator manual ENGLISH lowrance.com Copyright 2012 Navico All Rights Reserved Lowrance and Navico are registered trademarks of Navico. Fishing Hot Spots is a registered trademark of Fishing
More informationGO XSE. Operator Manual. ENGLISH
GO XSE Operator Manual ENGLISH www.simrad-yachting.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not
More informationNSS evo3 Quick Start Guide
NSS evo3 Quick Start Guide EN Front panel 2 3 4 5 6 7 8 9 10 11 12 12 1 No. Description 1 Touch screen. Pages/Home key - press to open the Home page for page selection and setup 2 options. WheelKey - user
More informationEasy. Touch. Simrad NSS Touchscreen Multifunction Displays. A Touch simpler.
Easy. Touch. Simrad NSS Touchscreen Multifunction Displays A Touch simpler. Simrad NSS Introducing NSS. Incorporating our outstanding Touch Sensible technology, the all-new NSS Sport is the touchscreen
More informationOCEAN 7T. Technical presentation (ENGLISH) FURUNO ELECTRIC CO., LTD. All Rights Reserved.
OCEAN 7T Technical presentation (ENGLISH) Software technology Navigation software has been designed to make the most of Radio Ocean marine plotters. Works in Multi-Touch Screen Jeppesen charting technology
More informationZeus 2 Glass Helm QuickStart Guide
Zeus 2 Glass Helm QuickStart Guide EN Turning on/off the Zeus 2 Glass Helm system Press the Power key/button: - on the front of the Zeus 2 processor - on the front of the monitor (depending on type of
More informationHDS Gen2 RTM 3.5 software update
HDS Gen2 RTM 3.5 software update The HDS RTM 3.5 software update enables autopilot control of the MotorGuide Xi5 trolling motor via the Lowrance SmartSteer interface. MotorGuide Xi5 trolling motor To use
More informationGO XSE. Getting Started. ENGLISH
GO XSE Getting Started ENGLISH www.simrad-yachting.com Contents 6 Introduction 6 The Home page 7 Application pages 9 Basic operation 9 System Controls dialog 9 Turning the system on and off 10 Selecting
More informationDMK 11A & 11A GPS Owners Manual
DMK 11A & 11A GPS Owners Manual Table of Contents Section I Description of DMK 11A & 11A-GPS 1.1 Introduction 1.2 Background 1.3 Infrastructure Connection 1.4 Components 1.5 Input Protocols 1.6 Configuration
More informationVulcan. Operator Manual ENGLISH. bandg.com
Vulcan Operator Manual ENGLISH bandg.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected
More informationF6-Fingerprint. Access Control/Reader. User Manual. F6 - Simplified Instruction. (Master Code) # (Factory default:1234) Enter the Programming Mode
-Fingerprint Access Control/Reader Function Description Enter the Programming Mode - Simplified Instruction Operation (Factory default:1234) Change the Master Code Add Fingerprint User Add Card User Add
More informationIS35 Color Display. User Manual ENGLISH. simrad-yachting.com
IS35 Color Display User Manual ENGLISH simrad-yachting.com Preface Navico is continuously improving this product, therefore we retain the right to make changes to the product at any time which may not
More information3G & HD Radar Upgrade Information
3G & HD Radar Upgrade Information 3G - Broadband Radar HD Pulse Radars. 2 kw, 4 kw, 6 kw, 10 kw and 25 kw Overview Broadband and HD radars occasionally require a software upgrade. This is generally to
More informationManual. Network Expansion Port 2 NEP-2. English. Brands by Navico - Leader in Marine Electronics
Manual Network Expansion Port 2 NEP-2 English www.lowrance.com www.simrad-yachting.com Brands by Navico - Leader in Marine Electronics Disclaimer As Navico is continuously improving this product, we retain
More informationNSO evo2. Operator Manual ENGLISH.
NSO evo2 Operator Manual ENGLISH www.simrad-yachting.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not
More informationSimrad NSS evo2 & NSO evo2 Software upgrade instructions
Simrad NSS evo2 & NSO evo2 Software upgrade instructions ENGLISH For versions 52.1.103 and above www.simrad-yachting.com Preface As Navico is continuously improving this product, we retain the right to
More informationADDENDUM GO XSE sw release 3.0
ADDENDUM GO XSE sw release 3.0 This addendum documents new features that are included in GO XSE software release 3.0 and that are not described in the GO XSE Operator manual or other documentation. Feature
More informationGO7. Operator Manual ENGLISH. simrad-yachting.com
GO7 Operator Manual ENGLISH simrad-yachting.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected
More informationR5 SUPREME SW Release notes
Table of contents 1 R5 SUPREME CDU SW release history... 4 1.1 SW 1.2.6 (2018-05-04)... 4 1.1.1 Compatibility... 4 1.1.2 List of changes... 4 1.2 SW 1.2.5 (2017-03-12)... 4 1.2.1 Compatibility... 4 1.2.2
More informationVIS-3200 / VIS-3201 User Manual
2.4GHz Indoor Black Wireless Exit Button Receiver Keypad / Reader Access Control 500 Users Range of 50 Feet Delay and On/Off Toggle Mode Battery Operated Standalone No Software 1 VIS-3200 / VIS-3201 User
More informationCL7 DISPLAY QUICK START MANUAL 6YD-2819U-E0
CL7 DISPLAY QUICK START MANUAL 6YD-2819U-E0 Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview
More informationOperation Manual. Simrad NSE8 and NSE12 Multi-function Displays. English. A brand by Navico - Leader in Marine Electronics.
Operation Manual Simrad NSE8 and NSE12 Multi-function Displays English www.simrad-yachting.com A brand by Navico - Leader in Marine Electronics Preface Disclaimer As Navico is continuously improving this
More informationTable of Contents pg " Display pg Cruise Mode pg Map Screen pg Stereo Screen pg Depth Screen pg.
USER GUIDE TABLE OF CONTENTS Table of Contents pg. 2 12.3" Display pg. 3-4 Cruise Mode pg. 5-6 Map Screen pg. 6-13 Stereo Screen pg. 14-17 Depth Screen pg. 17 Settings Screen pg. 18-24 Media Screen pg.
More informationChapter 2: Installation. ST80 Multiview. Operation & Setup
Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company. Chapter 2: Installation 1 ST80 Multiview
More informationGO7. Installation Manual ENGLISH
GO7 Installation Manual ENGLISH Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected in this version
More informationMULTI-FUNCTION DISPLAYS A3416: 8 INCH / A3417: 13.3 INCH
Multi-Function Displays (A3416 & A3417) - Overview, Configuration MULTI-FUNCTION DISPLAYS A3416: 8 INCH / A3417: 13.3 INCH The OctoPlex A3416/A3417, Multi-Function Displays allow for the users to control
More informationManual. Simrad IS70/IS80 Rudder Indicators RI70 and RI80. English
Manual Simrad IS70/IS80 Rudder Indicators RI70 and RI80 English www.simrad-yachting.com A brand by Navico - Leader in Marine Electronics Manual Simrad IS70/IS80 Rudder indicators RI70 and RI80 English
More informationHook2 Series. Operator Manual. 5 HDI, 5 TS, 7X GPS TS, 7 HDI, 7 TS, 9 TS, 9 HDI, and 12 TS ENGLISH
Hook2 Series Operator Manual 5 HDI, 5 TS, 7X GPS TS, 7 HDI, 7 TS, 9 TS, 9 HDI, and 12 TS ENGLISH www.lowrance.com Preface Disclaimer As Navico is continuously improving this product, we retain the right
More informationBEP 600-ACSM AC SYSTEMS MONITOR. Installation and Operating Instructions. Page 1
BEP 600-ACSM AC SYSTEMS MONITOR Installation and Operating Instructions Page 1 This page has been deliberately left blank Page 2 Table of Contents 1. BASICS 4 WARNING AND CAUTION 4 WARNING 4 CAUTION 4
More informationIS40/Triton System Installation Manual
MODE STBY IS40/Triton System Installation Manual ENGLISH 1 1 10 10 AUTO Preface As Navico are continuously improving this product, we retain the right to make changes to the product at any time which may
More informationEL-ST100 KEYPAD CONTROLLER
WIRING DIAGRAM EL-ST100 KEYPAD CONTROLLER WEATHER-PROOF STANDALONE ACCESS CONTROLLER WITH KEYPAD & PROXIMITY TECHNOLOGY Programming and Installation Manual NOTE: www.elock2u.com ICT at work! Version 3.6
More informationSingle Door Standalone Access Control User Manual
Single Door Standalone Access Control User Manual Reading this manual carefully before install and use the device 1. Packing List Name Quantity Remarks Keypad User manual Screw driver Rubber plug Self
More informationElite 5 DSI Operation manual
Elite 5 DSI Operation manual Copyright 2010 Navico All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written
More informationNSO evo2 QuickStart Guide
NSO evo2 QuickStart Guide EN Turning the NSO evo2 system on and off Press the Power key/button: - on the front of the NSO evo2 Processor - on the front of the monitor (depending on type of monitor and
More informationHDS. GEN2 Touch: Version GEN3: Version
HDS GEN2 Touch: Version 4.0 4.0 51.1.69 GEN3: Version 1.5 1.5 51.1.70 Feature Enhancements Features This Software update will give the following features: HDS Gen3 Wireless Connectivity GoFree shop on
More informationQuick Reference Guide
Quick Reference Guide Zeus MFDs 2 4 6 5 7 8 10 1 11 CHART RADAR ECHO NAV INFO EN IN OUT 1MOB 2 ABC 4 GHI DEF 5 JKL 6 MNO 7 PQRS 8 TUV 9WXYZ STBY AUTO 0 9 12 1 PAGES 1 Direct Access Keys (DAK). Provide
More information*Fixed: Requires a heading input to display AIS targets on a radar only display
NN3D V2.13 Software 1/2015 *Fixed: Requires a heading input to display AIS targets on a radar only display NN3D V2.12 Software 1/2015 *New: BBWX3 compatibility *New: Blue Force Tracking (BFT) compatibility
More informationSimply point and choose
Simply point and choose Examples of menu buttons: Center on Boat - The chart updates itself around the boat automatically. Quick Route - Quick and easy, make and activate a route from the boat s position.
More informationBoating Tip #45: Chartplotters
Boating Tip #45: Chartplotters As navigation technology has advanced, hand held GPS receivers have further evolved into chartplotters. Chartplotters graphically display a vessel s position, heading and
More informationIS40 PRO. Operator Manual ENGLISH
IS40 PRO Operator Manual ENGLISH Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected in this
More informationManual. Navico SW Upgrade Tool. English.
Manual Navico SW Upgrade Tool English www.lowrance.com www.northstarnav.com. www.simrad-yachting.com Brands by Navico - Leader in Marine Electronics Manual NAVICO Software Upgrade Tool English Document
More informationHook2 X Series. Operator Manual. 4x GPS, 4x Sonar, 5x GPS HDI, 7x GPS HDI ENGLISH
Hook2 X Series Operator Manual 4x GPS, 4x Sonar, 5x GPS HDI, 7x GPS HDI ENGLISH www.lowrance.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes
More informationGETTING STARTED. Link Controller. Remote
GETTING STARTED i-pilot Link Controller Software Updates Link Controller 1. Loading the software file onto the SD card. Note that no other software loads (FF or remote) can be on the card. 2. Prep the
More informationTHE OVAL CONTROL OPERATING GUIDE MODEL SETR-60 and SETR-61
THE OVAL CONTROL OPERATING GUIDE MODEL SETR-60 and SETR-61 1. Power up the boat s main DC service and turn on the trim tab circuit breaker. The Oval" will come up on standby but no LED s will be lit. 2.
More informationW3-M. Metal waterproof standalone access control/reader. User Manual
W3M Metal waterproof standalone access control/reader User Manual Name Digital Keypad W3M User Manual Screw driver Rubber bungs Selftapping screws Diode 1. Packing List Quantity 1 1 1 4 4 1 Remark 6*27mm,
More informationCV-550SPK V2 Waterproof Keypad/Reader/Controller Installation Instructions
CV-550SPK V2 Waterproof Keypad/Reader/Controller Installation Instructions Packing List NAME MODEL/SIZE QTY Self tapping screw 0.15 x 1.06 (4mm 27 mm) Rubber plug 0.23 x 1.2 (6mm 30 mm) Star screw driver
More informationWaterproof. Keypad/Reader/Controller
Waterproof Keypad/Reader/Controller User Manual W1-C W3-C User manual 1. Packing List Name Quantity Remarks Digital Keypad-W1-C/W3-C 1 User manual 1 Screw driver 1 Rubber bungs 4 6*27mm, used for fixing
More informationTRADEMARK REGISTERED SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 1201XSK Printed in Japan Catalogue No. R-201
www.furuno.com All brand and product names are registered trademarks, trademarks or service marks of their respective holders. Alpha blending technology is used for transparency effects. TRADEMARK REGISTERED
More informatione7 7 Network Multifunction Display
NEW e7 7 Network Multifunction Display The new e7 is a feature rich MFD that sets a new standard for ease of use, performance, and connectivity. A networking wonder, the e7 breaks new ground with Wi-Fi
More informationUncompromising performance...
Uncompromising performance... www.bandg.com/h3000 Welcome to the next generation... B&G systems have been at the leading edge of advanced marine electronics for over 50 years. We pride ourselves in providing
More informationODES Zeus Touch Owner s Manual
ODES Zeus Touch 2017 Owner s Manual 2016-09-15 1611997 We continually strive to bring you the highest quality, full-featured products. As a result, you may find that your actual display screens may be
More informationCONTENTS SETTING THE TIMERS AND LAP TIMER...18
CONTENTS GENERAL INTRODUCTION TO B&G NETWORK... 2 INSTRUMENTS NAVIGATIONAL AIDS... 2 AUTOPILOTS COMMUNICATIONS... 2 INTRODUCTION TO NETWORK SPEED... 3 NETWORK SPEED DISPLAY UNIT... 3 EXAMPLES SYSTEMS USING
More informationInsight Genesis Quick Start Guide
Insight Genesis Quick Start Guide ENGLISH https://insightgenesis.com Contents 3 Insight Genesis 3 Easy Steps 4 Sign Up for an Account 5 Record - HDS 6 Record - Elite/Mark 7 Optimal Sonar Log Recording
More informationPC-Planner. The Perfect Navigational Planning Tool. View charts on your PC Add and edit waypoints Create and edit routes Measure distances
PC-Planner The Perfect Navigational Planning Tool View charts on your PC Add and edit waypoints Create and edit routes Measure distances TM Download SelectMarks Transfer data from your PC* *With compatible
More informationCM-110SK Standalone Keypad Installation Instructions
CM-0SK Standalone Keypad Installation Instructions. Packing List Qty Name Remarks 2 2 Keypad User manual Screwdriver Wall plugs Self-tapping screws Torx screw 0.8 x 2.4 Φ(20 mm 60 mm) 0.24 x.2 Φ (6 mm
More informationGPSMAP 551s. GPSMAP 551s. Explore the Seas
The GPSMAP 551 is a compact chartplotter that features an ultra-bright 5 QVGA colour display along with an improved high-speed digital design for increased map drawing and panning speeds. It s ready to
More informationGN70/MX610/MX612 QuickStart Guide
GN70/MX610/MX612 QuickStart Guide EN The front panel 1 2 3 PAGE MENU 8 10 POS NAV 9 HDG AIS 11 4 5 6 ESC MOB 7 ENT USB 12 13 USB No. Description 1 PAGE key: Brings up different screen page every time this
More informationLowrance Plotter Sync
Lowrance Plotter Sync August 2017 Navionics Boating App Example using Boating Caribbean & South America User must have an Active Subscription New Users can skip this step, existing users may need to renew
More informationInstructions for SimplicityTouch ST-700 Gen 3 TECHNICAL TRAINING GUIDE
Page 1 Instructions for SimplicityTouch ST-700 Gen 3 TECHNICAL TRAINING GUIDE Manuals included in guide: 1. Update panel firmware and reinstall applications. page 2 2. Update router firmware page 10 3.
More informationFingerprint Access Control F1. User Manual
Fingerprint Access Control F1 User Manual 1. Introduction F1 is a metal shell standalone fingerprint access control, using the America Atmel s MCU, with precise electron circuit and good productive technology.
More informationNAVpilot-700/711/711C. Yamaha Helm Master Interface
Model: NAVpilot-700/711/711C Yamaha Helm Master Interface INDEX 1. Yamaha Helm Master 1-1 What is Yamaha Helm Master? 1-2 Helm Master Network via Helm Master IF Kit Model FAP-6310 2. Yamaha Helm Master
More informationStandalone Keypad Access Control. User Manual. Please read the manual carefully before use this unit
Standalone Keypad Access Control User Manual Please read the manual carefully before use this unit 1. Packing List Name Quantity Remarks Keypad 1 User manual 1 Screw driver 1 Φ20mm 60mm,Special for keypad
More informationInstallation & Operation manual Operation manual
Elite-3x Installation & Operation manual Operation manual Copyright 2014 Navico All rights reserved. Lowrance and Navico are registered trademarks of Navico. Navico may find it necessary to change or end
More informationStandalone Keypad Access Control. User Manual. SS-TS2000 Size:120*80*25 mm
Standalone Keypad Access Control User Manual SS-TS2000 Size:120*80*25 mm Please read the manual carefully before use this unit 1. Packing List Name Quantity Remarks Keypad 1 User manual 1 Screw driver
More informationECI1. COMPASS display. ECI1-REV For latest update: Electronic Compass Indicator ECS1
ECI1 COMPASS display Electronic Compass Indicator ECS1 ECI1-REV. 1.3 20-12-2004 For latest update: www.elproma.com/compass Contents 1 Introduction... 1 1.1 Package contents... 1 2 Working... 2 2.1 The
More informationGO XSE Quick Guide. Front panel. The System controls dialog. No. Key Function
GO XSE Quick Guide EN Front panel 1 No. Key Function 1 Power Press and hold to turn the unit ON/OFF. Press once to display the System control dialog. The System controls dialog Used for quick access to
More informationOnSiteWX v2.2 Help. Display Preferences lets you select options that change the way the gauges are shown.
OnSiteWX v2.2 Help 1. Quick Start OnSiteWX v2.2 is designed for use with any of the following adapters: DMK 11A or 11A-GPS; Chetco SeaSmart SSN2K; ShipModul MiniPlex-2Wi; Navico GoFree Wifi- 1; Digital
More informationCL7 DISPLAY QUICK START MANUAL 6YD-F819U-E0
CL7 DISPLAY QUICK START MANUAL 6YD-F819U-E0 Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview
More informationUser Guide - EkoTek Synchronised Ethernet Repeater
User Guide - The Synchronised Ethernet Repeater may simplistically be thought of as a repeater, which may be connected directly to a LAN. However, this new product brings many other advantages to the EkoTek
More informationDOLXFD1000B. Waterproof Access Control/Reader
DOLXFD1000B Waterproof Access Control/Reader INTRODUCTION The DOLXFD1000B is a single- entry multi-function Access Controller with integrated keypad and card reader. It is designed and manufactured to
More information4-1. This chapter explains HMI settings.
4-1 4. Hardware Settings This chapter explains HMI settings. 4.1. Overview... 4-2 4.2. I/O Ports... 4-2 4.3. LED Indicators... 4-2 4.4. System Reset... 4-3 4.5. System Toolbar... 4-4 4.6. System Setting
More informationElite 5X DSI, Mark 5X DSI, Elite 4X DSI & Mark 4X DSI
Elite 5X DSI, Mark 5X DSI, Elite 4X DSI & Mark 4X DSI Installation & Operation Operation manual manual Copyright 2011 Navico All rights reserved. Lowrance and Navico are registered trademarks of Navico.
More informationZeus 3 Glass Helm. Installation Manual ENGLISH.
Zeus 3 Glass Helm Installation Manual ENGLISH www.bandg.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may
More information