1 WiPG-1600 User s Manual. WiPG User's Manual. version: 2.01

Transcription

1 1 WiPG-1600 User s Manual WiPG-1000 User's Manual version: 2.01

2 2 WiPG-1600 User s Manual Table of Contents 1 Overview Package Contents USB Token Contents Physical Details What You Might Need Hardware Installation Standby Screen of the Projector/Display Web Management Home Page Download Conference Control WebSlides Admin System Status Device Setup Network Setup OSD Setup Change Passwords Reset to Default Firmware Upgrade WebSlides Setup Reboot System Logout Using MirrorOp (Sender) to Start Projection Start the MirrorOp application Main User Interface of MirrorOp (Sender) A Complete User s Guide on MirrorOp (Sender) Use the SidePad Function with MirrorOp Receiver Launch WebSlides Wall-Mount Kit... 39

3 3 WiPG-1600 User s Manual 1 Overview wepresent WiPG-1000 is a professional wireless presentation gateway. With the revolutionary interactive and wireless features, wepresent WiPG-1000 enables users to deliver presentations wirelessly from a PC, Mac, ipad, iphone or any Android device to a projector, to use a tablet or smartphone to control the projecting PC/Mac, and to view the presenting slides! Basic Features Wireless screen and audio projection Remote desktop control Support Windows: 7 / 8 / 10 Support macos: 10.9 and above Plug and show! No installation is required; just plug in the accompanied token to a USB port, and a hassle-free presentation can be started in seconds. The MirrorOp Presenter app supports ios/android mobile devices High-speed projection (up to 30 fps) 4-to-1 split screen projection (turn one projector into four; increase meeting productivity right away) Conference control (allow moderators to streamline meetings) Provide session security login, wireless WEP/WPA/WPA2 key and gatekeeper functions to protect presentation contents and maintain office network security Web management (including the software download and device settings) Support the WiFi AP-Client mode

4 4 WiPG-1600 User s Manual 2 Package Contents wepresent WiPG-1000 Base Unit wepresent USB Token Power Adapter (DC +5V, 2.6A) Two Detachable WiFi Antennas Quick Installation Guide Warranty Card CE DoC and Warning Statement 3 USB Token Contents MirrorOp Installer for Windows MirrorOp Installer for Mac Executable MirrorOp Application for Windows Executable MirrorOp Application for Mac VDD Driver (For Windows 8/10 Virtual Extended Screen) SVS Driver (For Mac Extended Screen) SNMP MIB File User Manual (for WiPG-1000) User Manual (for MirrorOp Sender)

5 5 WiPG-1600 User s Manual 4 Physical Front Panel Details Power Button/LED Indicator USB Port Description Power Button and LED Indicator Power on/off button. LED indicator: red - system loading, green - system ready USB Port (Front) 2 USB ports for USB mouse/keyboard/thumb drive Rear Panel Ethernet Port HDMI Port Power Jack USB Port VGA Port Audio Jack WiFi Antennas Description WiFi Antennas USB Port (Rear) 2 detachable antennas for better WiFi performance USB port for USB mouse/keyboard/thumb drive/iwb device (HID type) Ethernet Port 10/100M RJ-45 port

6 6 WiPG-1600 User s Manual VGA Port HDMI Port Audio Jack (3.5mm) Power Jack For VGA projector/display For HDMI projector/display For speaker DC 5V in Bottom Side Reset Button Description For hard reset * * *To perform a hard reset to restore your WiPG-1000 device to the factory default settings, please follow the below procedures: 1. Long press the reset button and hold. 2. Turn on the WiPG-1000 and wait for over 10 seconds until the LED indicator turns green. 3. Release the reset button. 4. The WiPG-1000 will be restored to the factory default settings.

7 7 WiPG-1600 User s Manual 5 What You Might Need Projector/display with VGA/HDMI interface (Required) Ethernet cable (Required if you want to disable the WiFi of the WiPG-1000) Windows or Mac computer Apple iphone, ipad or ipod touch Android phone or tablet Speaker USB mouse/keyboard USB HID IWB device 6 Hardware Installation 1) Connect the WiPG-1000 to the projector/display through the VGA/HDMI port and turn on the projector/display power. 2) Connect the power adapter to the WiPG-1000 and press the power button to turn on the device. The system is ready when the LED indicator turns green. The default standby screen as shown below will be displayed when the system is ready.

8 8 WiPG-1600 User s Manual SSID/Hostname Login Code IP Address 3) If you disable the WiFi of the WiPG-1000, you need to connect the device to an existing IT network through an Ethernet cable. 4) Insert the speaker cable to the WiPG-1000 audio jack for audio output. (A speaker is required for audio output when using VGA.) 5) Insert the USB mouse/keyboard/iwb device to the WiPG-1000 front/rear USB port for OSD (On-Screen Display) control or remote control. 7 Standby Screen of the Projector/Display 1) The following information will be shown on the standby screen: (a) software download instructions; (b) WiFi network name or SSID [default SSID is WiPG-1000-xxx (xxx are the last three numbers of the MAC ID shown on the bottom side of the WiPG-1000 device)]; (c) IP address [default IP address is ]; (d) login code. 2) If there is any sender device connected to the WiPG-1000, click on and a list

9 9 WiPG-1600 User s Manual of connected sender devices will be shown on the standby screen. The conference moderator can use the USB mouse/keyboard to select which device to use and control it remotely. 3) If you need more advanced information, please click the Setup icon and you can: (a) find the FW version, resolution, and WiFi security information; (b) make a Plug & Show USB token. 4) The screen saver mode will be activated if no sender device is connected. The system will return to the standby status immediately when any sender device is connected.

10 10 WiPG-1600 User s Manual 8 Web Management 8.1 Home Page 1) Make sure your sender device connects to the WiPG-1000 successfully. 2) Open the browser of the sender device, and enter the receiver IP address in the address bar of the browser. You can find the receiver IP address on the standby screen of the projector/display. (Default IP address is ) 8.2 Download 1) Select the Download function. 2) Please select Utility for Windows or Utility for Mac (and click Download ). Then, execute the installation program. Note: Please disable the Smart Screen Filter in the IE browser; otherwise you might not be able to download the file.

11 11 WiPG-1600 User s Manual 8.3 Conference Control 1) Select the Conference Control function, and a list of connected sender devices will be shown. 2) Enter the password and then click Login. (Default password: moderator) 3) After login, you can see a user-list on the screen which indicates all the users connected to the WiPG-1000.

12 12 WiPG-1600 User s Manual 4) There are three columns: Name, Play Control and IP Address. 5) Play Control: There are six buttons (a) (full screen); (b) (upper-left quadrant of the screen); (c) (upper-right quadrant of the screen); (d) (lower-left quadrant of the screen); (e) (lower-right quadrant of the screen); (f) (stop) 6) Uncheck the Allow control from this page only, and the centralized control will be disabled, allowing users to project the screen to WiPG-1000 freely. 8.4 WebSlides 1) Press the WebSlides button to enter the WebSlides page. 2) Enter the password if necessary. 3) Start to capture the current projecting screen.

13 13 WiPG-1600 User s Manual 8.5 Admin 1) Click [Admin], and then enter the password to log in to the web admin page. (Default Password: admin) System Status Click [System Status], and the current system status will be shown. < Model Name >: WiPG-1000P < Versions > Firmware Version: version number of the installed firmware < Network Status > IP address: IP address of the WiPG-1000 device Subnet Mask: subnet mask Default Gateway: default gateway Wireless MAC address: wireless MAC address Wire MAC address: wire MAC address < Connection Status > Projecting Status: Waiting for projecting or Projecting Total Users: the number of users logging into the WiPG-1000 device

14 14 WiPG-1600 User s Manual Device Setup Click [Device Setup], and the device setting items will be displayed. < Device Setup > Choose VGA or HDMI (output option) Resolution: HDMI: 720p, 1080i, 1080p VGA: UXGA (1600x1200), WXGA+ (1440x900), WXGA (1360x768, 1280x768, 1280x800), XGA (1024x768), and SVGA (800x600). Code: You can select Disable, Random, or Use the following code to set a specified 4-digit number as the login code. IWB USB Port: You can configure the IWB USB port to support the IWB (HID) or Mouse/Keyboard device. < SharePod Pairing Settings >: Choose Apply wepresent s WiFi settings or Apply the following WiFi settings. (If you choose Apply the following WiFi settings, input the SSID to which the SharePod should connect.) Encryption: The default setting is Disable. (If you have entered the SSID manually, you can also choose WEP, WPA AES, WPA2 AES, WPA TKIP, or WPA2 TKIP.)

15 15 WiPG-1600 User s Manual Key: If the Encryption function is enabled, you have to set a key value according to the encryption mode you have selected. < AirPlay > Enable or Disable the AirPlay feature. Note: If a login code is set on the WiPG-1000 device, you will be asked for a password when you use AirPlay on Mac or ios devices. Please enter the same login code in the AirPlay password dialog box. < Apply > Confirm and save all changes. < Cancel > Cancel all changes Network Setup Click [Network Setup], and the network setting items will be shown.

16 16 WiPG-1600 User s Manual <Note: The network configuration of WiPG-1000 is automatic via DHCP> The default setting of the WiPG-1000 is DHCP client. When the WiPG-1000 is connected to a LAN that already has a DHCP server present, the WiPG-1000 takes an IP address assigned to it by the server. When the WiPG-1000 is connected to a LAN that does not have a DHCP server, the WiPG-1000 can become the DHCP server in the network. < IP Setup > You can select obtain an IP address automatically or Use the following IP address IP Address: The default value is Subnet Mask: The default value is Default Gateway: The default value is DNS Server: The default value is < DHCP Server Setup > You can select Auto (Enable/Disable the DHCP Server) or Disable Start IP: The start IP address of the DHCP Server End IP: The end IP address of the DHCP Server Subnet Mask: The default value is Default Gateway: The default value is DNS Server: The default value is < Wireless Setup > Wireless LAN: The default value is Enable. Host Name and Domain Name: The default name is WiPG-1000-xxx (xxx are the last three numbers of the MAC ID shown on the bottom side of the WiPG-1000) SSID Broadcast: The default value is Enable Band: The default value is 2.4 GHz ( the 5 GHz option is available in some regions) mode: The default value is 2.4G B/G/N mixed Channel: The default value is Auto (you can also choose to set a fixed channel). The Auto option means that after the WiPG-1000 is powered on, the system will scan all the wireless channels and select a clear channel automatically. Encryption: The default value is Disable (you can also choose WEP, WPA or WPA2 ) Key: If the Encryption function is enabled, you have to set a key value

17 17 WiPG-1600 User s Manual according to the encryption mode you selected Channel Bandwidth: 20MHz or Auto (20MHz/40MHz) [The default value is Auto ] < AP Client > Connect to Existing AP: The default value is Disable (if you choose Enable, input the SSID of the existing AP you want to connect to). Encryption: The default value is Disable (if you Enable the Connect to Existing AP function, you can select WEP, WPA AES, WPA2 AES, WPA TKIP or WPA2 TKIP ) Key: (If the Encryption function is enabled,) you have to set the Key value according to the encryption mode you selected. < Gatekeeper > You can choose All Pass, All Block, or Internet Only [The default value is All Pass ] < SNMP > You can choose Enable or Disable [The default value is Enable ] < Apply > < Cancel > Click the Apply button, and follow the reboot instructions as they appear on the screen (for the modifications to take effect). Cancel all the modifications

18 18 WiPG-1600 User s Manual OSD Setup Click [OSD Setup], and you can change the standby image < Change Standby Image > Restore to default: Restore the standby image to the default one. Browse: Browse and choose an image file you wish to display on the standby screen. Image File Upload: Upload the image file you selected. < Display Option > Device Information: Show All or Hide All [The default value is Show All ]

19 19 WiPG-1600 User s Manual User-List: Enable (show the user-list) or Disable (hide the user-list) [The default value is Enable ] Connect Info: Enable (show the overlay connection info) or Disable (hide the overlay connection info) [The default value is Enable ] Font Color: Adjust the font color of system information [The default value is white (#FFFFFF)] Screen Saver Settings: (a) Enable or Disable the screen saver [The default value is Enable ; (b) Configure the Idle Time (minutes) [The default value is 5 mins] Change Passwords Click [Change Password], and you can change the password settings. (Length: up to 8 characters) < Conference Control > <Enter New Password>: Enter the new password you want to use for Conference Control. <Confirm New Password>: Confirm the new password by entering it once again.

20 20 WiPG-1600 User s Manual <Apply>: Confirm and save the new password. < Admin > <Enter New Password>: Enter the new password you want to use for Admin. <Confirm New Password>: Confirm the new password by entering it once again. <Apply>: Confirm and save the new password Reset to Default Click [Reset to Default] to restore your WiPG-1000 device to the factory default settings. <Apply>: Confirm to perform the reset. *** To perform a hard reset to restore your WiPG-1000 device to the factory default settings, please follow the below procedures: A. Long press the reset button (on the bottom side of the WiPG-1000) and hold. B. Turn on the WiPG-1000 and wait for over 10 seconds until the LED indicator turns green. C. Release the reset button. D. The WiPG-1000 will be restored to the factory default settings.

21 21 WiPG-1600 User s Manual Firmware Upgrade Click [Firmware Upgrade] to import/export the system configuration and upgrade the firmware. < System Configuration > Export: Export the current system configuration to a configuration file Import: Import a system configuration file to WiPG-1000 < Firmware Upgrade > A. Firstly, you have to get the latest firmware image file from your vendor. B. Click Browse to select the file you need to upgrade the firmware. C. Click Upgrade to perform the upgrade. D. A warning message will be shown, and a progress bar will appear on the screen. E. After a few minutes, a message will be shown on the screen, telling you the upgrade is complete. F. WiPG-1000 will reboot to complete the upgrade process.

22 22 WiPG-1600 User s Manual Warning: Do not power off the WiPG-1000 while the firmware upgrade is in progress; otherwise your WiPG-1000 device may crash and you have to return the device to your vendor for repair.

23 23 WiPG-1600 User s Manual WebSlides Setup Click [WebSlides Setup] to set up the WebSlides function. < Auto Refresh Interval >: Choose Manual Refresh, 10, 20, 30, 45, 60 or 90 seconds refresh interval < Access Password Control >: Choose Disable, Use the same password as Code or Use the following Code Note: It is important to realize that all the WebSlides users consume wireless bandwidth. If there are more than 10 concurrent WebSlides users, it is recommended to connect WiPG-1000 to your company network via Ethernet, or set up a wireless router to connect to WiPG Then, users should connect their devices to WiPG-1000 via their company network or a wireless router in order to secure the projection performance. The number of concurrent WebSlides users should not exceed the recommended number shown on the Webslides Setup page (displayed as above) to avoid connection failure or poor projection performance.

24 24 WiPG-1600 User s Manual Reboot System 1) Click [Reboot System], and you can restart the system. <Reboot>: Reboot the system automatically Logout 1) Click [Logout] (on the upper-right corner of the screen), and you can log out of the WiPG-1000.

25 25 WiPG-1600 User s Manual 9 Using MirrorOp (Sender) to Start Projection 9.1 Start the MirrorOp application Windows: 1) Click the MirrorOp icon on the desktop to execute the application, or launch the MirrorOp application from the USB token directly. 2) It will start to search for the WiPG-1000 device automatically.

26 26 WiPG-1600 User s Manual 3) Click on the WiPG-1000 device and enter the login code shown on the display. 4) Click the PLAY button to start the screen sharing. Mac: 1) Click on the MirrorOp icon from the Applications folder to execute the application. 2) It will start to search for the WiPG-1000 device automatically.

27 27 WiPG-1600 User s Manual 3) Click on the WiPG-1000 device and enter the login code shown on the display. 4) Click the PLAY button to start the screen sharing.

28 28 WiPG-1600 User s Manual 9.2 Main User Interface of MirrorOp (Sender) Collapse/Expand the Info Panel Minimize the User Interface Settings Exit/Close the Application Expand/Collapse Device List Full/Split Screen Start/Stop Projection Sound/Mute

29 29 WiPG-1600 User s Manual 9.3 A Complete User s Guide on MirrorOp (Sender) 1) For a complete user s manual on MirrorOp (Sender), click the Settings icon on the upper-left corner of the info panel. Then, click About in the menu bar. 2) Click Get Help on the lower-right corner of the screen, and then you can view the MirrorOp User s Manual.

30 30 WiPG-1600 User s Manual 10 Use the SidePad Function with MirrorOp Receiver 1) Introduction: SidePad is a feature that allows controlling the presenting PC/Mac from an ios/android device running the MirrorOp Receiver app. Display PC/Mac HDMI/VGA Cable Tablet/Smartphone (Projection) (Projection) WiPG-1000 (Remote Control) 2) How to use the SidePad function: A. PC/Mac running the MirrorOp (Sender) app Click the Settings icon on the upper-left corner of the info panel. Then, click Preferences in the menu bar.

31 31 WiPG-1600 User s Manual Check Allow controlling from tablets Set the passcode (default passcode: 1111) B. Tablet/Smartphone running the MirrorOp Receiver app

32 32 WiPG-1600 User s Manual Android Install the MirrorOp Receiver app from the Google Play store. Open the MirrorOp Receiver app. Long-press the Menu button on your Android device, and click Settings. Check Search for senders on start. Close MirrorOp Receiver and re-open it. You will see the name of the PC/Mac with the MirrorOp (Sender) app installed.

33 33 WiPG-1600 User s Manual Select which PC/Mac you want to control and enter the passcode you set earlier. Now you are able to remotely control the Mac/PC from your tablet/smartphone. ios Install the MirrorOp Receiver app from the Apple App store. Go to Settings on your ios device, and click (MirrorOp) Receiver.

34 34 WiPG-1600 User s Manual Enable Search for senders on start. Open the MirrorOp Receiver app.

35 35 WiPG-1600 User s Manual You will see the name of the PC/Mac with the MirrorOp (Sender) app installed. Select which PC/Mac you want to control and enter the passcode you set earlier. Now you are able to remotely control the Mac/PC from your tablet/smartphone.

36 36 WiPG-1600 User s Manual 11 Launch WebSlides Introduction: The Webslides function allows the presenter (PC/Mac with the MirrorOp Sender app installed) to broadcast the projecting screen/slides to the audience (multiple login devices) during a presentation, so that the audience can save the slides for note-taking later. Note: The WebSlides function is not available when the Quad-Screen mode is on. - Connect your mobile device to the WiPG-1000 via WiFi or LAN - Open your web browser, and enter the IP address of the WiPG View the presenting slides on your device save the slides as JPG files for note-taking, annotation or others - A new way of paper-less meeting 1) Presenter: Your PC/Mac needs to connect to the WiPG-1000 device via WiFi or LAN. Make sure the Webslides function is enabled by the MirrorOp Sender app.

37 37 WiPG-1600 User s Manual 2) Audience: The audience also need to connect to WiPG-1000 via WiFi or LAN. Open the browser of the audience s login devices, and enter the IP address of WiPG-1000 in the address bar of the browser. [Default IP address is ] The below image will appear on the audience s devices. Click Websildes on the middle-left of the screen.

38 38 WiPG-1600 User s Manual The audience will see the below image on their devices, and they can start to receive the projecting screen/slides. They can save the projecting screen (for note-taking later) by clicking in the menu bar at the top of the screen

39 39 WiPG-1600 User s Manual 12 Wall-Mount Kit 1. Insert the two short screws ( ) into the two holes on the bottom side of the WIPG [Remember to place the two plastic washers ( ) between the two short screws ( ) and the WIPG-1000.] 2. Install the mounting bracket on the wall with the four long screws ( ). 3. Secure the WIPG-1000 to the mounting bracket.