BIS - Basic package V4.2

Transcription

1 Engineered Soltions BIS - Basic package V4.2 BIS - Basic package V4.2 Integration of Bosch and third party systems throgh deployment of OPC All relevant information in one ser interface Flly embedded access control Fll event log for forensic investigations Scalable system that grows with yor needs The Bilding Integration System (BIS) BIS is a flexible, scalable secrity and safety management system that can be configred to handle an enormos spectrm of operational scenarios. It contains a hge range of applications and featres which enable both the integration and copling as well as the monitoring and control of all technical bilding systems. This new version bilds on Bosch's many years of experience in management systems and was considerably inflenced by the following market trends: Increasing complexity of technical bilding eqipment The increasing complexity of technical eqipment inside bildings reqires a powerfl management system which combines the most varied fnctions (e.g. fire and intrsion alarm systems, access control, video systems and bilding atomation... etc.) in the best possible way. The OPC standard enables BIS to process and share information efficiently with a hge and growing variety of hardware devices and other sorces. Using new technologies and standards While the strict reglations in the field of secrity technology ensre a high degree of reliability in secrity matters, they hinder the integrated se of new technologies from the IT world. BIS has scceeded in harnessing the benefits of non-secritybased technologies (e.g. OPC, CAD, web) and harmonizing them with the world of secrity technologies. Need for complete soltions Facility managers and integrators are demanding a single bilding-management soltion that is nevertheless able to integrate all their secrity sbsystems. System overview The Bilding Integration System is a versatile prodct made p of a basic package pls varios optional components (also known as Engines) based on a common software platform. The engines can be combined to tailor bilding management systems to detailed reqirements. These main components are: Atomation Engine Access Engine Video Engine Secrity Engine

2 2 BIS - Basic package V4.2 * * * * not available in all contries These engines are described in greater detail in separate datasheets. Fnctions System architectre The BIS Engines provide fire and intrsion detection, access control, video srveillance, pblic address/ alarms pls the monitoring of HVAC and other vital systems. BIS is based on a performance-optimized mlti-tier architectre especially designed for se in Intranet and Internet environments. Sbsystems are connected via the well-established, world-wide OPC standard. This open standard makes it easy to insert BIS into existing OPC-compliant sbsystems. Optionally, individal BIS systems can cooperate by providing data to, or consming data from, other BIS systems. The reslt is a Mlti-server BIS system. 2. Wide area network (WAN) 3. BIS provider servers with workstations and roters in local area networks (LAN) Organizational strctre and configration A nmber of atomatic fnctions and easy-to-se tools make configration installer-friendly, saving time and expense. Hierarchical location trees can be created by the import of existing CAD data containing layers, named views and detector locations. Zooming and panning allow rapid navigation throgh the bilding. The ser interface is web -based sing dynamic HTML pages. Defalt pages for different screen resoltions and formats are inclded in the installation software, and the defalt pages can easily be cstomized sing a standard HTML editor. BIS atomatically detects the monitor resoltion and provides the appropriate ser interface. Operation The system s main task is to operate as the alarmmonitoring and control center for the varios secrity systems within a site. Its graphical interface is designed to help the operator grasp the extent and rgency of an occrrence qickly, and to take prompt and effective action. The heart of the system, the State Machine, monitors all incoming events and operator reqests and, if desired, can take actions prescribed by ser-defined rles, ths nbrdening the operators. 1. A BIS consmer server with workstations and roter in a local area network (LAN) System secrity State-of-the-art encryption between BIS servers and workstations provides additional secrity in addition to configrable ser-access rights. If PCs within a corporate network are to be sed as client workstations then enhanced secrity can be achieved by restricting operators to specific workstations or IPaddresses.

3 3 BIS - Basic package V4.2 Basic package The Bilding Integration System basic package provides many featres sed in common by the varios Engines. Cstomizable device condition conters to provide an overview of the condition of sbsystems across the entire BIS system Message processing and alarm display Alarm qee with p to 5000 simltaneos alarm events and detailed alarm information Device overview for all connected sbsystems, and their peripherals (detectors) and internal virtal devices (operator, server,...) in the form of a tree strctre with detailed information abot address, stats, type, location and notes. Control the peripherals via the context mens of their tree nodes. Fixed assignment of operators to workstations for higher secrity State machine for atomated event and alarm handling. Web-server-based platform allows client workstations to connect to BIS via jst the browser. Direct spport for location maps in standard AtoCAD DWF vector format redces configration effort. Ability to compartmentalize the managed site into atonomos divisions, and to restrict operators to the control of specific divisions. Ability to provide specific information to the operator in the form of free-form miscellaneos hypertext docments, inclding text, bitmaps, video images, etc. Changes to architectre within a graphic (new walls, moving a door, etc.) can be implemented withot changing the BIS configration, simply import a new plot file. Atomated workflows between operators, with message broadcasting and cstomizable escalation paths Hge library of standardized detector icons in standard vector format inclding color, event and control definitions Direct control and monitoring of detectors via the context mens of their icons in the location maps Direct control and monitoring of detectors via the logical tree-strctre (e.g. bilding floor room) of a site, with hyperlinks to photos, manals, instrctions Location tree generated atomatically from the "named views" within the AtoCAD graphic Action management for atomatic and manal control into connected sbsystems and their peripherals Highly configrable operator athorizations for monitoring and control of sbsystems and their peripherals Event log to ensre all events are completely docmented (inclding messages received and actions taken) Reporting services to qickly create cstomized and interactive reports from the event log Linking and embedding of OPC servers from any compter in the network Online Help Action plans and location maps BIS amplifies standard alarm-handling by its ability to display action plans and location maps, inclding graphical navigation and the alarm-dependent visalization of layers inside those maps. This ensres optimal gidance to operators especially in stress sitations, sch as fire or intrsion alarms.

4 4 BIS - Basic package V4.2 Alarm-dependent layer control allows the display of additional graphical information for specific sitations, e.g. escape rotes in case of fire alarms. BIS optional accessories The optional featres listed below can be added to the BIS system to meet specific cstomer reqirements. They are sable with all the BIS Engines (Atomation, Access, Video and Secrity Engine). Alarm-dependent action plans or workflows provide detailed event-dependent information sch as standard operating procedres, live images, control bttons, etc. to the operator. Simply create and assign one action plan to each possible alarm type in yor system, e.g. fire alarm, access denied, technical alarms, etc. With the deletion of an alarm message an nmodifiable snapshot of the displayed action plan is attached to the event log. This ensres accontability by providing a trace of all steps performed by the operator dring the alarm response. Alarm management package This package extends the standard alarm-handling of yor BIS system by some additional featres: Message Distribtion allows the definition of escalation scenarios which are activated atomatically when an operator or operator grop fails to acknowledge an alarm message within a defined period. BIS will then forward the message atomatically to the next athorized operator grop. The Timer featre allows the setp of time schedles which can be sed to perform atomatic control commands, sch as closing a barrier at 8:00 pm, as well as for time-dependent redirection of alarm messages, e.g. within time period 1 show message to operator grop 1 else to operator grop 2. Location maps are a visalization of premises e.g. floors, areas or rooms, based on the poplar AtoCAD vector-graphics format. Detectors and other devices are represented by colored, animated icons that provide direct control via their context mens. Rightclicking an alarm cases the map to zoom in on the location where it was triggered. A location tree provides entry points to the location map and its graphical navigation fnctions (pan, zoom). The Operator Alarm featre allows an operator to trigger an alarm manally from the location tree, for example, if informed by telephone of a dangeros sitation. Sch manal alarms are processed in the same way as those triggered by a detector: that is, the associated docments are displayed and all steps taken are recorded in the event log for thorogh postevent investigation. The Application Lancher allows the invocation of non- BIS applications by the system based pon predefined conditions, e.g. alarms or timers. A typical application of this wold be for an atomatic, schedled system backp.

5 5 BIS - Basic package V4.2 Installation/configration notes Bilding Integration System in figres Addresses, detectors, control elements, cameras etc. which can be processed nmber of events per second Parts inclded 200,000 per BIS server 500 (continos, with higher peaks possible) When ordered as Installation Media in Box the box contains: Qty. Components 1 BIS Installation medim with software and installation manals as PDF 1 Qick installation gide (printed) When downloaded (Version 4.0 and later) the online docmentation is contained in the download. The basic package incldes the following licenses: Qty. Components 1 Operator client license 1 Division license Technical specifications Minimm technical reqirements for a login or connection server Operating Systems (standalone or client/server mode) Servers Windows 7 SP1 (32 or 64 bit, Pro, Enterprise) Windows Server 2008 R2 SP1 (64 bit, Windows 8.1 (64 bit, Pro, Enterprise) Windows Server 2012 R2 (64 bit, Note: The defalt database delivered with this BIS Version is SQL Server 2012 SP1 Express edition. Other Software IIS 7.0 or 7.5 for Windows 7 and Windows 2008 Server R2 IIS 8.5 for Windows 8.1 and Windows 2012 Server R2 Note: IIS is not necessary on BIS connection servers Internet Explorer 9, 10 or 11 in compatibility mode.net 2.0,.NET 3.51 and.net 4.0 Latest drivers and OS pdates are highly recommended. Minimm hardware reqirements Intel i3 processor or higher 4 GB RAM (8 GB recommended) Servers 80 GB of free hard disk space VGA graphics adapter with a resoltion of 1280 x 1024 and at least 32k colors 100 Mbit Ethernet card (PCI) 1 free USB port or network share for installation Minimm technical reqirements for a client compter Operating Systems (standalone or client/server mode) Clients Windows 7 SP1 (32 or 64 bit, Pro, Enterprise) Windows Server 2008 R2 SP1 (64 bit, Windows 8.1 (32 or 64 bit, Pro, Enterprise) Windows Server 2012 R2 (64 bit, Other Software ASP.NET Internet Explorer 9, 10 or 11 in compatibility mode (Note: The SEE client reqires IE 9.0).NET 2.0,.NET 3.51 (for Video Engine with DiBos), and.net 4.0 Minimm hardware reqirements Additional minimm reqirements for VIE (Video Engine) clients Intel i3 or higher 4 GB RAM (8 GB recommended) 20 GB free hard disk space Graphics adapter with 1280 x1024 resoltion, 32k colors, 256MB dedicated memory with OpenGL 1.2 or later 100 Mbit Ethernet card No Windows Server operating systems Intel i5 processor or higher For camera seqencing, virtal matrix or Mltiview add 4GB RAM Latest video drivers are highly recommended. Use the Windows dxdiag tool to make sre drivers are no more than 1 year old. Ordering information BIS is available in the following langages: DE = German EN = English ES = Spanish FR = French HU = Hngarian NL = Dtch PL = Polish PT = Portgese RU = Rssian TR = Trkish ZH-CN = Simplified Chinese ZH-TW = Traditional Chinese A BIS basic license is reqired when setting p a new system

6 6 BIS - Basic package V4.2 Ordering information BIS 4.2 Basic License License for the se of the software as downloaded from the website. No physical parts are delivered and the ser docmentation is contained in the download. Order nmber BIS-BGEN-B42 BIS 4.2 Alarm Management Package License for the addition to BIS of the featre specified Order nmber BIS-FGEN-AMPK42 BIS 4.2 additional 1 Operator Client License for the addition to BIS of the featre specified Order nmber BIS-XGEN-1CLI42 BIS 4.2 additional 1 Division License for the addition to BIS of the featre specified Order nmber BIS-XGEN-1DIV42 BIS 4.2 Mlti-Server Connect per Server License for the addition to BIS of the featre specified Order nmber BIS-FGEN-MSRV42 BIS 4.2 BVMS Connectivity License for the connection between one BIS and one BVMS installation Order nmber BIS-FGEN-BVMS42 BIS Upgrade from 3.0 to 4.x License for an pgrade between the versions specified. Order nmber BIS-BUPG-30TO40 BIS Upgrade from 2.x to 4.x License for an pgrade between the versions specified. Order nmber BIS-BUPG-2XTO40 Represented by: North America: Erope, Middle East, Africa: Asia-Pacific: China: Latin America and Caribbean: Bosch Secrity Systems, Inc. Bosch Secrity Systems B.V. Robert Bosch (SEA) Pte Ltd, Secrity Bosch (Shanghai) Secrity Systems Ltd. Robert Bosch Ltda Secrity Systems Division 130 Perinton Parkway Fairport, New York, 14450, USA Phone: Fax: secrity.sales@s.bosch.com P.O. Box BA Eindhoven, The Netherlands Phone: Fax: emea.secritysystems@bosch.com Systems 11 Bishan Street 21 Singapore Phone: Fax: apr.secritysystems@bosch.com Bilding, No. 333 Fqan Road North IBP Changning District, Shanghai China Phone Fax: Via Anhangera, Km 98 CEP Campinas, Sao Palo, Brazil Phone: Fax: latam.boschsecrity@bosch.com Bosch Secrity Systems 2016 Data sbject to change withot notice en, V3, 10. May 2016