!!!---WARNING---!!! FOR RACING VEHICLE USE ONLY
|
|
- Elvin Welch
- 6 years ago
- Views:
Transcription
1 Power Vision GETTING STARTED GUIDE Parts List 1 Power Vision Unit 1 J1850 Cable 1 USB Cable 1 Software CD 1 Getting Started Guide!!!---WARNING---!!! FOR RACING VEHICLE USE ONLY Note: This product is not for use on roads or vehicles subject to emission control requirements and is not legal for use or installation on motor vehicles operated on public highways in the State of California or other States where similar emission and decibel regulation laws may apply. The user shall determine suitability of the product for his or her use. The user shall assume all risk and liability in violation of regulations and any incurred fi nancial obligations due to vehicle inspections or emissions tests Mendenhall Drive North Las Vegas, NV Power Vision Getting Started Guide - 1
2 Determining Your Operating System Windows XP FIG. 1 1 Right-click My Computer and select Properties. 2 Click the General tab. For a 32-bit version operating system, Windows XP Professional Version <Year> appears under System. Use PowerVisionSoftwareInstaller_x32_xxxxx.msi for this installation. For a 64-bit version operating system, Windows XP Professional x64 Version <Year> appears under system. Use PowerVisionSoftwareInstaller_x64_xxxxx.msi for this installation. FIG. 2 Windows Vista 1 Right-click My Computer and select Properties. 2 Verify System Type. FIG. 3 Windows 7 1 Right-click My Computer and select Properties. 2 Verify System Type. Power Vision Getting Started Guide - 2
3 WinPV Software Installation Use the following instructions to install the WinPV software on your computer. FIG. 4 It is strongly recommended that you exit all other Windows programs before running this install program. 1 Insert the WinPV CD in your CD-ROM drive. 2 Double-click My Computer and browse to your CD/DVD Drive. 3 Double-click PowerVisionSoftwareInstaller_x32_xxxxx.msi for 32-bit operating systems or PowerVisionSoftwareInstaller_x64_xxxxx.msi for 64-bit operating systems. Or Download the WinPV software from Dynojet. FIG. 5 4 Read the Welcome window and click Next to continue. 5 Carefully read the WinPV license agreement, check the accept box, and click Next to continue. To install WinPV, you must accept this agreement. If you do not, Setup will close. 6 Carefully read the information provided in the Readme window and click Next to continue. 7 Select a destination location for your WinPV software to be installed and click Next to continue. Dynojet recommends that you do not change the default destination folder. FIG. 6 8 Setup will automatically add program icons to the Start menu. You may type a new folder name or select one from the Existing Folders list. Click Next to continue. 9 Read the summary of your settings and click Install. 10 Click Finish to complete the installation. 11 Continue with the Power Vision Driver Installation. Power Vision Getting Started Guide - 3
4 Power Vision Driver Installation 1 Using the USB cable, connect the Dynojet Power Vision to your computer. FIG. 7 The Found New Hardware window will open. 2 Select Yes, this time only and click Next. FIG. 8 3 Select Install from a list or specific location and click Next. 4 Select Search for the best driver in these locations. 5 Verify the location points to your Power Vision folder in Program Files. FIG. 9 6 Click Next. 7 Click Finish to close the wizard. 8 Continue with Checking the WinPV Update Client. Power Vision Getting Started Guide - 4
5 Checking the WinPV Update Client 1 Using the USB cable, connect the Dynojet Power Vision to your computer. FIG Click Start on the Windows task bar and click All Programs. 3 Select PowerVision >PV Update Client. 4 Click Check For Updates. Select the following items to update: PV Firmware PV Tune Database PV Software (Update Utility, WinPV, etc.) Note: Make sure you select the correct operating version. Refer to Determining Your Operating System on page 2. 5 Click Download & Install Selected Updates. FIG As the downloads are completed, click. The Welcome to the Power Vision Software Setup Wizard window will appear. 7 Click Next to continue. 8 Carefully read the Power Vision software license agreement, check the accept box, and click Next to continue. To install the Power Vision software, you must accept this agreement. If you do not, Setup will close. The Power Vision Software Feature window will appear. 9 Click Next to continue. Dynojet recommends you do not make any changes to this window. FIG. 12 Setup is ready to install the Power Vision Software. 10 Click Install to begin installation. 11 The Power Vision Software update is now complete. Click Finish to exit the Setup Wizard. For detailed software instructions and user information, refer to the Help included in the software. Power Vision Getting Started Guide - 5
6 Installing the Power Vision 1 Connect the Power Vision to the ECU s J1850 port. FIG. 14 FIG Route the Power Vision cable away from any moving or hot parts. Dynojet recommends using zip ties to secure the cable to existing non-moving components. FIG The Power Vision module may be mounted to the bike s handlebars using Techmount hardware. Note: The Power Vision does not need to remain on the bike. Figure 15 and Figure 16 are examples of the Power Vision module mounted to a 2009 Night Rod using the Techmount bracket Toll Free: Power Vision Getting Started Guide - 6
7 FIG. 16 Figure 15 and Figure 16 are examples of the Power Vision module mounted to a 2009 Night Rod using the Techmount bracket. Saving Stock Calibration FIG. 17 Save Stock saves a copy of the stock calibration to the Power Vision module as a backup. Save Stock must be completed before any editing can be done to the parameters on the device or in the WinPV software. Use the following steps to save the stock ECU calibration to the Power Vision module. 1 Touch Vehicle Tools >Save Stock. FIG Touch Yes. 3 Touch when completed. Power Vision Getting Started Guide - 7
8 Loading a Stock File for Editing FIG. 19 The Power Vision accepts custom tune files created in WinPV and pre-loaded Dynojet maps installed in the Power Vision memory from Dynojet Research. To edit stock files, the Power Vision must be married to the ECU. Marrying the Power Vision to the ECU locks the Power Vision module to that ECU and prevents a single device from being used on multiple ECUs. You cannot unlock a Power Vision from a married ECU. Once the marriage process is complete, you can open the stored calibration in the WinPV software to edit all parameters or change Dynojet specific functions on the device. Use the following steps to load a copy of the stock tune file for editing. Note: Once this process is complete, the Power Vision module will be married to the ECU. FIG Touch Program Vehicle >Load Tune. 2 Touch Load Copy of Stock. This will load a copy of the stock tune into the Tune Manager. Once loaded into a slot, it will be converted into a custom tune which can be edited and/or flashed to the ECU. FIG Touch a slot to save the selected tune file. Note: If there is any data in the selected slot, it will be overwritten. 6 Touch. A copy of the stock tune will be saved. 3 Touch. 7 Touch. The tune is now ready. FIG. 21 The Power Vision and the bike are now married. 4 Touch. FIG Touch Flash to flash this tune to the ECU. or Touch Edit to edit this tune. or Touch Exit to exit the screen without any changes. Power Vision Getting Started Guide - 8
9 Loading a Custom or Dynojet Tune File FIG. 24 The Power Vision accepts custom tune files created in WinPV and pre-loaded Dynojet maps installed in the Power Vision memory from Dynojet Research. Use the following steps to load a Dynojet map file to the ECU. 1 Touch Program Vehicle >Load Tune. FIG Select Dynojet Tune. The Power Vision is now searching for compatible tunes for the connected ECU. 3 Touch. FIG Touch a slot to save the selected tune file. Note: If there is any data in the selected slot, it will be overwritten. 8 Touch. A copy of the stock tune will be saved. The tune is now ready. FIG Select a Dynojet Tune file to load. 5 Touch Select. FIG Touch Flash to flash this tune to the ECU. or Touch Edit to edit this tune. or Touch Exit to exit the screen without any changes. 10 Touch. FIG Verify the Tune information. If the Tune information is correct, touch Continue. FIG Turn the ignition key off and wait ten seconds. 12 Turn the ignition key back on. Power Vision Getting Started Guide - 9
10 LOAD TUNE Returns to Tuning menu Select the type of tune to load into tune manager. CANCEL DYNOJET CUSTOM STOCK IF Yes User Selects Dynojet Tune Select Description of Selected Tune Displays a list of available DYNOJET TUNES IF None No DYNOJET TUNES are available for this bike Returns to LOAD TUNE IF Yes List of any LOADED TUNES Basically the Tune Manager User selects any of the tunes that have been either preloaded, loaded through DYNOJET TUNES or STOCK TUNES IF None No Tunes have been loaded into the Tune Manager, Please LOAD Either a DYN- OJET TUNES or a STOCK TUNE This will LOAD a copy of the STOCK tune into the TUNE MANAGER. Once Loaded into a SLOT it will be converted into a CUSTOM tune which can be EDITED and or FLASHED to ECM Select Slot to save to SAVE a COPY of STOCK to: Returns to LOAD TUNE Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Continue Select the Slot you would like to Load the selected tune into SELECT User selects slot Select User Selects Slot Select Would you now like to EDIT or Flash this tune to the ECU? The COPY of STOCK has been successfully save. CAUTION!!! Any Data in this slot will be overwritten by the selected tune. Loads tune into chosen slot in Tune Manager IF NOT This tune is locked and not editable Checks to see if Custom Tune is Editable EDIT Select Parameter to Edit User Selects Parameter FLASH Flashes tune to ECU Turn off bike to set. EXIT Would you now like to EDIT or Flash this tune to the ECU? EDIT FLASH EXIT (Parameter edit no change from current) User EDITS Parameter Select Parameter to Edit Flashes tune to ECU Confirm User Selects Parameter Turn off bike to set. NO User CONFIRMS EDIT YES (Parameter edit no change from current) Would you like to save this EDIT to the tune? User EDITS Parameter NO User saves EDIT to tune Confirm YES Returns to EDIT or APPLY NO User CONFIRMS EDIT YES Would you like to save this EDIT to the tune? Outline Key Main Buttons Action of User or Power Vision NO User saves EDIT to tune YES Text that will be displayed on screen Returns to EDIT or APPLY PV or User determines somthing Power Vision Getting Started Guide - 10
!!!---WARNING---!!! 2011 DYNOJET RESEARCH ALL RIGHTS RESERVED FOR RACING VEHICLE USE ONLY
!!!---WARNING---!!! FOR RACING VEHICLE USE ONLY Note: This product is not for use on roads or vehicles subject to emission control requirements and is not legal for use or installation on motor vehicles
More informationQUICK START INSTALLATION GUIDE
QUICK START INSTALLATION GUIDE !!!---WARNING---!!! FOR RACING VEHICLE USE ONLY Note: This product is not for use on roads or vehicles subject to emission control requirements and is not legal for use or
More informationWELCOME TO DYNOJET WINPV SOFTWARE
WELCOME TO DYNOJET WINPV SOFTWARE The Software Engineers at Dynojet understand your need to attain the maximum performance from the Harley Davidson motorcycles you evaluate and tune. For this reason, they
More informationDynojet Research, Inc. All Rights Reserved. User Guide for the Power Vision and WinPV Software.
2010-2012 Dynojet Research, Inc. All Rights Reserved. User Guide for the Power Vision and WinPV Software. This manual is copyrighted by Dynojet Research, Inc., hereafter referred to as Dynojet, and all
More informationThunderMax TMaxI User Software USB Driver Installation Guide for Windows Operating Systems v
ThunderMax TMaxI User Software USB Driver Installation Guide for Windows Operating Systems v.011410 INDEX PAGE 1. USB Driver Installation Guide for Windows XP Page 02 2. USB Driver Installation Guide for
More informationHOW TO UPDATE SOFTWARE, FIRMWARE & CONFIRM SOFTWARE/FIRMWARE VERSION
HOW TO UPDATE SOFTWARE, FIRMWARE & CONFIRM SOFTWARE/FIRMWARE VERSION SmartLink IV Tuning Manual Excerpt Pages 159-170 SOFTWARE Version 2008.1.14 For ThunderMax High Resolution ECM For 2001-2009 Delphi
More informationDIRECT LINK FLASH TUNER
DIRECT LINK FLASH TUNER Quick Start Guide This Guide is intended to answer basic Direct Link tuning questions and to act as a Quick Start Guide. It is not intended to be encyclopedic on the tuning process
More informationEXPRESS. Users Guide. Version 3.5
EXPRESS Users Guide Version 3.5 Table of Contents 1 System Overview... 3 2 System Requirements... 3 3 Contents in ECMTUNE System Box... 3 4 Installation Information... 4 5 Registration Information... 7
More informationPROFESSIONAL. Users Guide. Version 3.5
PROFESSIONAL Users Guide Version 3.5 Table of Contents 1 System Overview... 3 2 System Requirements... 3 3 Contents in ECMTUNE System Box... 3 4 Installation Information... 4 5 Registration Information...
More information1) Installing Bluetooth software for Windows (A) Place installation CD into PC and setup should launch automatically.
1) Installing Bluetooth software for Windows (A) Place installation CD into PC and setup should launch automatically. If setup does not launch, use Windows Explorer to navigate to the appropriate CD- ROM
More informationSOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM
SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM CONTENTS ABOUT THE SOFTWARE BEFORE INSTALLATION INSTALLING THE SOFTWARE CONNECTING TO A COMPUTER CONFIGURING THE PRINTER DRIVER TROUBLESHOOTING Page
More informationThis is a GENERAL Servant Keeper Network Installation help sheet. If you need further assistance, please contact your network administrator.
SK Help Network Help Sheets - Workstation Installation This is a GENERAL Servant Keeper Network Installation help sheet. If you need further assistance, please contact your network administrator. Due to
More informationInstalling TAM Air Assistant Software TM
Installing TAM Air Assistant Software TM Installation Instructions This document describes how to make a new installation of TAM Air Assistant. TAM Air Assistant is intended to be installed on a PC running
More informationUSB driver and Software Installation. UPS Monitoring and Management Software
USB driver and Software Installation UPS Monitoring and Management Software LEN.MAN.SOF.143 Rev.1.00/2008 Installing USB driver and Easy-Mon X for LEONICS UPS 1. Installing and uninstalling the USB driver
More informationProcom PPC Software User s Manual
Procom PPC Software User s Manual Version 1.1 Procom Engineering Inc. 66 Maxwell, Irvine, CA 92618, USA Tel: 949-748 6338 Fax: 949-748 6339 Email: info@procomengineering.com www.procomengineering.com Contents
More informationOBDII Programmer Quick Start Guide
COPYRIGHT The C.A.T.S. OBDII Programmer is copyright 2005 with all rights reserved. The distribution and sale of this software are for the exclusive use of the original purchaser for use exclusively on
More informationuser guide read all safety warnings and cautions prior to using this product
for Android & ios user guide read all safety warnings and cautions prior to using this product Contents 3 Section 1: Safety 3 Warnings & Cautions Explained 3 Safety Warnings 4 Section 2: Product Overview
More informationQuick Start Guide Ford Mustang
Multimedia Navigation System Quick Start Guide Ford Mustang *FOR MODELS WITH FORD SYNC ONLY Navigation Bluetooth Hands-Free (For use with Sync) ipod and MP3 compatible (For use with Sync) Back-up camera
More informationStart Here. Unpack. 1 Make sure you have these items: 2 Remove all the packing materials and tape.
Epson Stylus Pro 3880 Start Here Unpack 1 Make sure you have these items: Printer Power cord CD-ROM User's Guide Ink cartridges Rear sheet guide Limited Warranty Warning: The printer weighs about 43 pounds
More informationContents. Getting Started...1. Managing Your Drives...9. Backing Up & Restoring Folders Synchronizing Folders...52
Contents Getting Started.....................................................1 Installing the Software...........................................1 Using the Maxtor System Tray Icon................................6
More informationUser s Manual ACC-ECU3. USB 3.0 ExpressCard
User s Manual ACC-ECU3 USB 3.0 ExpressCard ABOUT THIS MANUAL This manual is designed for use with the USB 3.0 ExpressCard. Information in this document has been carefully checked for accuracy; however,
More informationHEX FLASH ECU PROGRAMMING TOOL
HEX FLASH ECU PROGRAMMING TOOL Contents 2 introduction 3-4 installation in Windows 8 5-7 manual driver install 8-15 read and writing to ECU 1 P a g e INTRODUCTION Thank you for purchasing the HEX FLASH
More informationHow to install the software of ZNS8022
How to install the software of ZNS8022 1. Please connect ZNS8022 to your PC after finished assembly. 2. Insert Installation CD to your CD-ROM drive and initiate the auto-run program. The wizard will run
More information2002 GSX1300R Hayabusa PCIII/PCIIIr
Floppy Disc Request Form If you do not have a CD-Rom drive and would like to receive the program and the alternate maps for your model on a 3 1/2 floppy disc, please fax this form to Dynojet at 1-702-399-1431
More informationGeneral Notice Introduction Functional Description Product Troubleshooting Driver Setup...
Table of Contents General Notice... 1 Introduction... 2 Functional Description... 4 Product Troubleshooting... 7 Driver Setup... 8 Firmware Update... 10 Warranty and Service... 12 General Notice The Bluetooth
More informationInstallation Instructions
Installation Instructions Contents 1 x i-flash cable 1 x i-flash key System Requirements Laptop/portable computer, Windows XP, Vista, 7, Windows 8 32 bit (Windows 8 64 bit see section 5) and Windows 10
More informationGSXR 1000 PCIII/PCIIIr
Floppy Disc Request Form If you do not have a CD-Rom drive and would like to receive the program and the alternate maps for your model on a 3 1/2 floppy disc, please fax this form to Dynojet at 1-702-399-1431
More information1. Installing the Drivers for Windows
For Ralink chipset products, please kindly refer to the following steps. 1. Installing the Drivers for Windows 1. Power on your PC, let the operating system boot up completely, and login as needed. 2.
More informationHow to Use imageprograf Firmware Update Tool (Version or later) (Mac OS) Canon Inc.
How to Use imageprograf Firmware Update Tool (Version 24.00 or later) (Mac OS) Canon Inc. 1. Introduction 1.1 imageprograf Firmware Update Tool Features The imageprograf Firmware Update Tool (hereinafter
More informationQuick Guide Crosstrek Impreza Legacy Outback. Love. It s what makes a Subaru, a Subaru.
Quick Guide Crosstrek Impreza Legacy Outback 2018 Love. It s what makes a Subaru, a Subaru. Table of Contents 2 Controls 3 Bluetooth Basics 4 7 Hands-free Calling SUBARU STARLINK Pairing Your Cell Phone
More informationPO Box Monheim/Germany Phone: Fax:
PO Box 80 86651 Monheim/Germany Phone: +49 9091 502-0 Fax: +49 9091 502-458 hama@hama.de http://www.hama.com All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
More informationFS Future Series Quick Start Guide
FS Future Series Quick Start Guide Please read the following instructions for installation and activation of your Visualizer 3D software! 1. License agreement and limited warranty Read carefully all terms
More informationContents. Installing the Driver...4. Motic Images Plus 2.0 ML Precise Calibration Capturing Images and Video...18
Contents Installing the Driver...4 Motic Images Plus 2.0 ML...13 Precise Calibration...13 Capturing Images and Video...18 Taking Measurements...20 Customizing Your Settings...21 Adding Sound to Your Files...23
More informationINSTALLING THE PS3 XBOX READY SOFTWARE:
INSTALLING THE PS3 XBOX READY SOFTWARE: 1. Insert the Installation CD to CD-ROM drive and execute Ready_Setup.exe NOTE: If it is the first time for the target USB disk using under this software, the software
More informationMF9300. Software setup guide
MF900 Software setup guide 0000 79-0 S INTRODUCTION This manual explains how to install and configure the software that is required for the printer function of the machine. The procedure for viewing the
More informationLeica IP C and IP S. Printer Driver Software For the Windows 8.1 (32/64 bit) and Windows 10 (64 bit) operating systems
Leica IP C and IP S Printer Driver Software For the Windows 8. (/64 bit) and Windows 0 (64 bit) operating systems Installation Instructions English Order No.: 406080 - Revision C Always keep this manual
More informationXS/SC26-2 Safety Controller. Quick Start Guide
XS/SC26-2 Safety Controller Quick Start Guide Original Instructions 174869 Rev. C 16 January 2015 1 THIS PAGE IS INTENTIONALLY LEFT BLANK ABOUT THIS GUIDE This guide is designed to help you create a sample
More informationInstallation Procedure of IRsolution
206-95080E Installation Procedure of IRsolution IRsolution Read the instruction manual thoroughly before you use the product. Keep this instruction manual for future reference. Copyright Shimadzu Corporation
More informationSmartyUDCsw - Quick Guide
1 Requirements 1.1.1 Minimum Hardware Requirements CPU: Pentium 1 GHz or higher. RAM: 512 MB or more. Video card: 3D accelerated; OpenGL 1.1 compatible; 800x600 65,535 colors. Disk space: you may need
More informationWVL2 Wireless Vehicle Link 2 Installation and Setup Manual
WVL2 Wireless Vehicle Link 2 Installation and Setup Manual Chapter 1: Introducing the Wireless Vehicle Link 2...1 WVL2 Components...2 Component Checklist...3 Product Specifications...4 System Requirements...5
More informationOptions. Parts List. Optional Expansion Hub Optional Ignition Module Optional Memory Card
Options Optional Expansion Hub Optional Ignition Module Optional Memory Card View boost, speed, and gear on the LCD Display. View the ignition changes on the LCD Display. Log and store map data. Card storage
More informationGAP Flasher. For all supported Vehicles. Quick Guide, Version 1 Firmware V1.0
For all supported Vehicles By Quick Guide, Version 1 Firmware V1.0 1 1 Introduction This quick guide summarizes the operations needed to update the engine map and or firmware version. Some operations are
More informationUG MCAP II & ecap II Smartware & USB Drivers Installation
MCAP II & ecap II Smartware & USB Drivers Installation Sept 4, 2008 Copyright 2008 by QEI Inc. ALL RIGHTS RESERVED NOTICE The information in this document has been carefully checked and is believed to
More informationEX700i Print Server/Integrated Fiery Color Server. Welcome
EX700i Print Server/Integrated Fiery Color Server Welcome 2011 Electronics For Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 45099409 22 June 2011 WELCOME
More informationDCAMCUT for AutoCAD / Mechanical Desktop. Installation Instructions Version 5.0
DCAMCUT for AutoCAD / Mechanical Desktop Installation Instructions Version 5.0 1 1.1 System Requirements Hardware Requirements Pentium IV, higher or compatible processor. CPU 1.5 GHz 1 GB RAM 750 MB free
More informationKODAK Dental Imaging Software Installation Guide
CS3000-12 KODAK Dental Imaging Software Installation Guide Notice Carestream Dental, Inc., 2010. No part of this publication may be reproduced, stored in a retrieval system, translated to another language,
More informationWireless-N USB Network Adapter. with Dual-Band QUICK INSTALLATION GUIDE. Package Contents
QUICK INSTALLATION GUIDE Wireless-N USB Network Adapter with Dual-Band Model: WUSB600N Package Contents Wireless-N USB Network Adapter with Dual-Band USB Extension Base with 59" cable Setup Wizard CD-ROM
More informationSOFTWARE USER S GUIDE
SOFTWARE USER S GUIDE RuggedJet series The contents of this guide and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice
More informationInstalling Lotus Notes on Your Computer Lotus Notes release (Standard and Basic versions)
Installing Lotus Notes on Your Computer Lotus Notes release 8.0.1 (Standard and Basic versions) You can install Lotus Notes on your PC just as you would install any other software. You may download the
More informationUser s Guide. CD Library II Software for Windows XP and Vista. CD Library II 4.0 Software CD Library software for CD Library products
User s Guide CD Library II Software for Windows XP and Vista CD Library II 4.0 Software CD Library software for CD Library products Important Information for Owners of CD Library product NOTE: If you own
More informationInstallation Manual LATC-W2
Installation Manual PRODUCT NAME Card Motor Controller Controller Setting Software for LATCA MODEL / Series / Product Number LATC-W2 [Before using this product] Read the "End-User License Agreement" shown
More informationWayteQ GPS Navigation X960BT User Manual. English Version
WayteQ GPS Navigation X960BT User Manual English Version Thanks for using WAYTEQ products! WAYTEQ reserves the rights of final interpretation of the manual. The product is subject to change without any
More informationBluetooth Software Update Manual
Bluetooth Software Update Manual for Windows 7 Applicable from 2012 products CDA-137EBT CDE-135EBT CDE-134EBT CDE-133EBT CDE-W235EBT IVE-W530EBT 1-7, Yukigaya-Otsukamachi, Ota-ku, Tokyo 145-0067, JAPAN
More informationDigivu Quick Start Guide. Digivu User Instructions
Digivu Quick Start Guide Digivu User Instructions Page - 2 Digivu User Instructions Page - 3 Table of contents Quick Start Guide 2 Digivu Functions 6 Connecting to a Vehicle Unit 6 Digivu Internal Memory
More informationAbila MIP DrillPoint Reports. Installation Guide
Abila MIP DrillPoint Reports This is a publication of Abila, Inc. Version 16.1 2015 Abila, Inc. and its affiliated entities. All rights reserved. Abila, the Abila logos, and the Abila product and service
More informationCustomer Inquiries Sten-Tel
STEN-TEL Companion AWC Companion User s Guide Thank you for purchasing STEN-TEL Companion, a software-based transport solution, which combines professional power with your personal touch. The material
More informationInstallation Instructions for HDS PC Software
CONTENTS Installation Instructions for HDS PC Software INSTALLATION Preparation... 1 Installation Instructions. 2 TROUBLESHOOTING GUIDE Administrator Rights. 9 Connection to the Master Server 9 Communication
More informationGSC400 Series. GSC400 Programmer and PC Interface User Manual
GSC400 Series GSC400 Programmer and PC Interface User Manual GSC400 Programmer and PC Interface User Manual Full Version File: GSC400 PC Interface Rev1.5.doc, December 2010 2 of 42 Thank You For Purchasing
More informationUSB-MIDI Driver installation and settings...1 Windows XP users... 1
Installation Guide Table of Contents USB-MIDI Driver installation and settings...1 Windows XP users... 1 Installing the KORG USB-MIDI Driver... 1 Allowing driver installation without a digital signature...
More informationBOOSTBYSMITH S ECU FLASHING INTERFACE (Gen II Hayabusa)
BOOSTBYSMITH S ECU FLASHING INTERFACE (Gen II Hayabusa) Contact Information: Greg Smith www.boostbysmith.com greg@boostbysmith.com (517)743-3666 INDEX I. Hardware Included II. III. IV. ECU1.0 Basics Installation
More informationWayteQ GPS Navigation x980bt User Manual. English Version
WayteQ GPS Navigation x980bt User Manual Version Thanks for using WAYTEQ products! WAYTEQ reserves the rights of final interpretation of the manual. The product is subject to change without any further
More informationJPRO Fleet Service Portal User s Guide
JPRO Fleet Service Portal User s Guide 1 System Requirements Supported Operating Systems Windows 2000 Windows XP Hardware Requirements Minimum: 128 MB RAM, 2 GB HD, Pentium II, 1024 x 768 monitor Recommended:
More informationPocket Drive II. USB2.0 External HDD. User s Manual
Pocket Drive II USB2.0 External HDD User s Manual Version 2.0 Table of Contents 1 Getting Started 1.1 Safety Precautions 1.2 System Requirements 1.3 Package Content 1.4 Product Views 1.5 Product Feature
More informationLASER Installation Guide for Standalone Install
LASER Installation Guide for Standalone Install Version 1.0 10/01/2012 1 Install, Starting the Application and Initial Setup... 3 Overview of Initial Set Up... 3 Install / Setup... 4 System Configuration...
More informationGRAMS Suite Version 9.0
Thermo Scientific GRAMS Suite Version 9.0 Welcome Guide Revision A 2010 Thermo Fisher Scientific Inc. All rights reserved. Thermo Fisher Scientific Inc. provides this document to its customers with a product
More informationTOUPCAM QUICK GUIDE INSTALLATION MANUAL
TOUPCAM QUICK GUIDE INSTALLATION MANUAL January 2013 1 WARNING! TO AVOID THE RISK OF FIREOR ELECTRICAL SHOCK. NEVER EXPOSE THIS PRODUCTTOWATEROR OPERATEIN AHIGH HUMIDITYENVIRONMENT. Keep camera away from
More informationINSIGHT Installation Instructions
This is the New Icon that will appear on your computer screen after the INSIGHT v8.1 software is installed. IMPORTANT: These instructions pertain to version 8.1.29. INSIGHT v8.1.29 requires Windows 8,
More informationThuraya SG-2520 Software Upgrade Manual
Thuraya Satellite Telecommunications Company Thuraya SG-2520 Software Upgrade Manual V. 1.4 JUNE, 2007 COPYRIGHT 2007 THURAYA SATELLITE TELECOMMUNICATIONS COMPANY ALL RIGHTS RESERVED Important: Please
More informationDino-Lite Digital Microscope User Manual. User Manual
User Manual Dino-Lite Digital Microscope User Manual Table of Contents Chapter 1 - Getting Started 1.1 Installation Instructions for Windows XP...1 1.2 Instructions for Windows Vista Users...8 Chapter
More informationHonda Toyota Accord Venza Quick Start Guide
Multimedia Navigation System Honda Pilot Quick Start Guide In-Dash Multi-Media / Navigation System Honda Toyota Accord Venza Quick Start Guide G System Features: Navigation Bluetooth Hands-Free ipod and
More informationInstallation Guide. Wyse R Class Conversion to WES7. Wyse USB Firmware Tool TM Release Issue: PN: L Rev. B
Installation Guide Wyse R Class Conversion to WES7 Wyse USB Firmware Tool TM Release 1.10 Issue: 102910 PN: 883887-18L Rev. B Copyright Notices 2010, Wyse Technology Inc. All rights reserved. This manual
More informationInstalling the Windows Custom PostScript or PCL Printer Driver
Installing the Windows Custom PostScript or PCL Printer Driver This ReadMe file contains the instructions for installing the Custom PostScript or PCL Printer Driver on Windows systems. The Custom PostScript
More informationGRAMS Suite Version 9.1
Thermo Scientific GRAMS Suite Version 9.1 Welcome Guide Revision A 2011 Thermo Fisher Scientific Inc. All rights reserved. Thermo Fisher Scientific Inc. provides this document to its customers with a product
More information12/2013. Installation Guide & User Manual
12/2013 Installation Guide & User Manual ABOUT THIS MANUAL This manual has been written to help you understand all the functions and capabilities of the Yamaha Snowmobile Diagnostic Tool in order to gain
More informationGreen Diesel Flash-Scan 3 Tool Instructions
Green Diesel Flash-Scan 3 Tool Instructions GDE Flash Tunes are installed and modified by our new touch screen hand-held programmer. The tool is delivered after being tested for functionality. Below are
More informationIPEmotion M.A.L.- PlugIn IPETRONIK CAN
IPEmotion M.A.L.- PlugIn IPETRONIK CAN User manual March 2009 All rights reserved! Content Content Content...2 1 Important information...4 1.1 Liability, Warranty, Copyright, License agreement... 4 1.1.1
More informationSoftware Kit. Automatic Door Controls. SIDOOR Software Kit. Introduction 1. General safety instructions. Installation. Uninstalling the software 4
Introduction 1 General safety instructions 2 Automatic Door Controls SIDOOR Operating Instructions Installation 3 Uninstalling the software 4 Sidoor User Software 5 HCS12 Firmware Loader 6 Sidoor Manager
More informationKanguru 52 in 1 Card Reader User s Guide
Copyright 2008, All Rights Reserved. Kanguru 52 in 1 Card Reader User s Guide Notices and Information Notices and Information Please be aware of the following points before using your Kanguru 52 in 1 Internal
More informationSoftware installation PCI-1050
This document describes software installation procedure for computerized engine set ups with Sr. Nos E72 to E130. 1 Add on Card The PCI-1050 (add on card) package is supplied with PCI-1050 add on card
More informationStellar Phoenix Windows Data Recovery - Pro
Stellar Phoenix Windows Data Recovery - Pro Version 4.2 Installation Manual 1 Overview Stellar Phoenix Windows Data Recovery is a complete solution to recover data from hard disk. However, Microsoft Windows
More informationRocketU 1144B / RocketU 1142A Host Controller USB 3.0 Host Adapters
RocketU 1144B / RocketU 1142A Host Controller USB 3.0 Host Adapters User s Guide Revision: 1.1 Jul. 24, 2015 HighPoint Technologies, Inc. 1 Copyright Copyright 2012 HighPoint Technologies, Inc. This document
More informationARES. User s Guide. Aprilia Racing Engine Setup. English version
ARES Aprilia Racing Engine Setup User s Guide English version ARES user s guide 2/59 I. WARNINGS... 6 II. SOFTWARE AND ENGINE CONFIGURATION COMPATIBILITY... 6 III. BEFORE UPDATING ARES TO A NEWER VERSION...
More informationTIE1.80InstallationGuideUK
Installation Guide 112206 2006 Blackbaud, Inc. This publication, or any part thereof, may not be reproduced or transmitted in any form or by any means, electronic, or mechanical, including photocopying,
More informationTable of Contents. On-Call Advanced Diabetes Data Management Software V1.0 User s Manual
Table of Contents Installation Instructions...2 Starting On-Call Advanced Diabetes Data Management Software...5 Main Windows...6 Patient Setup...6 Patient Info...7 Target Levels...8 Time Slot...9 Preference
More informationGAP Flasher. For all supported Vehicles. Quick Guide, Version 1.3 Firmware V1.0
For all supported Vehicles By Quick Guide, Version 1.3 Firmware V1.0 1 1 Introduction This quick guide summarizes the operations needed to update the engine map and or firmware version. Some operations
More informationPredator Revision Update Instructions PREP:
Predator Revision Update Instructions (for Trinity, please see Trinity Update Instructions): PREP: You Need USB/Serial Cable and Power Source #U7778 OR Serial/Serial Cable and Power Source #U7777 (For
More informationSmartPro Software Installation Guide. SmartPro Software Installation Guide
SmartPro Software Installation Guide www.protosmart.co.uk Page 1 of 11 Features... 3 Kit Contents... 3 Software Installation... 3 Driver Installation... 7 www.protosmart.co.uk Page 2 of 11 Please view
More informationWA1937 WebSphere Portal 7.0 Programming. Classroom Setup Guide. Web Age Solutions Inc. Copyright 2012 Web Age Solutions Inc. 1
WA1937 WebSphere Portal 7.0 Programming Classroom Setup Guide Web Age Solutions Inc. Copyright 2012 Web Age Solutions Inc. 1 Table of Contents Part 1 - Minimum Hardware Requirements...3 Part 2 - Minimum
More informationUSER MANUAL for USB Data Link
Driver Installation Under Win 95 OSR2.1 1.Step1: Double click "My Computer" "System Properties" "Device Manager" Step2: While installing USB Data Link Cable under Windows 95 OSR2.1 mode, make sure "Universal
More information3M Molecular Detection System Software Upgrade/Installation Instructions
User Manual Supplement Number: TB.342837.03 Effective Date: March 2018 Supersedes: TB.342837.02 Technology Platform: 3M Molecular Detection System Originating Location: St. Paul, MN 3M Molecular Detection
More informationBEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING
Software Setup Guide BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING Thank you for purchasing this product. This manual explains how to install
More informationInstallation Manual LATC-W2
Doc No.LA*-OMT0040 Installation Manual PRODUCT NAME Card Motor Controller Controller Setting Software for LATCA For Windows R 8.1 MODEL / Series / Product Number LATC-W2 [Before using this product] Read
More informationThis document describes the installation procedure for Embed-SE (Simulation Edition)
Installation Guide This document describes the installation procedure for Embed-SE (Simulation Edition) 2016.3. Main Installer Before you begin the installation, please read step 7. If you will be using
More information2008 (PM) Caliber SRT4
Dealer Service Instructions for: Emissions Recall H32 Reprogram PCM OBD Monitors October 2008 Effective immediately, all repairs on involved vehicles are to be performed according to this notification.
More informationFunction Description 3. Notice for Use...3. System Requirements.5. Start to use..6. ArcSoft PhotoImpression, VideoImpression and MediaImpression.
0 1 Contents Function Description 3 Notice for Use...3 System Requirements.5 Start to use..6 ArcSoft PhotoImpression, VideoImpression and MediaImpression.13 Product Specifications..28 Supplied Accessories
More informationGPS Personal Navigation GEOVISION 5000 Quick Guide Version 1.0
GPS Personal Navigation GEOVISION 5000 Quick Guide Version 1.0 Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OP This symbol alerts you that important literature concerning operation
More informationUtility Software Data Connection For 22S Instruction Manual
(E-Rev1) Utility Software Data Connection For 22S Instruction Manual Please read this instruction manual carefully before installation. LICENSE AGREEMENT READ THE TERMS OF THIS AGREEMENT CAREFULLY. Fujikura
More informationATX Document Manager. User Guide
ATX Document Manager User Guide ATX DOCUMENT MANAGER User Guide 2008 CCH Small Firm Services. All rights reserved. 6 Mathis Drive NW Rome, GA 30165 No part of this manuscript may be copied, photocopied,
More informationInstallation Instructions Version 6.0
DCAMCUT 6.0 for thinkdesign / hypercad Installation Instructions Version 6.0 1 1.1 System Requirements Hardware Requirements Pentium IV, higher or compatible processor. CPU 1.5 GHz 1 GB RAM 750 MB free
More informationTzunami Deployer Confluence Exporter Guide
Tzunami Deployer Confluence Exporter Guide Supports extraction of Confluence Enterprise contents and migrate to Microsoft SharePoint using Tzunami Deployer. Version 2.7 Table of Content PREFACE... I INTENDED
More information