CEREC Connect The World s only Network for Digital Dentistry!

Size: px

Start display at page:

Download "CEREC Connect The World s only Network for Digital Dentistry!"

Tobias Ford
6 years ago
Views:

1 CEREC Connect The World s only Network for Digital Dentistry! Quadrant cases from CEREC Connect in inlab CEREC Connect TT (Tips and Tricks) Bensheim, Germany August 2009

This document describes the workflow of how doing quadrant cases in the inlab software.

2 Quadrant cases from CEREC Connect in inlab CEREC Connect supports doing single cases as well as multiple units (quadrants). For doing quadrant cases from CEREC Connect with the inlab software a specific workflow must be followed. This document describes the workflow of how doing quadrant cases in the inlab software. General Workflow The general workflow of the process doing quadrants is as following: Introduction: An example Quadrant case The following example shows the workflow for a typical quadrant case. A dentist made a quadrant case with one inlay and two crowns (posterior and anterior). He submitted the case over the connect portal to your lab. Now open the inlab software and click the Connect icon to access the connect portal.

1 shows the order list with an example quadrant case. The little chain symbol indicates each restoration for the quadrant case.

3 First restoration: Inlay Portal In the Order List you see three new orders from a dentist Sirona Dental Systems (#2920, 2921, 2922). The little chain symbols indicate that these are quadrant restorations (fig.1). Click the View icon on the first order (#2920) to see the details for this order. Fig. 1 shows the order list with an example quadrant case. The little chain symbol indicates each restoration for the quadrant case. This means that the first order that has no chain symbol (in this case #2920) is the first restoration of the quadrant case. The second order with the chain symbol (#2921) is the next restoration for the quadrant case and the third and last order (#2922) is the last restoration for the quadrant case. By clicking the tabs Restoration Data, Desired Lab or Additional Notes you can see the further details for the first restoration. After checking theses details click the Accept/Reject Order Tab. Fig. 2 By clicking on the tabs Restoration Data, Desired Lab and Additional Notes you can see the details for the first restoration.

The file will be downloaded and opened in the inlab software automatically.

4 To get a preview of the restoration file click the cdt-file in the Attachment Preview section. The file will be downloaded and opened in the inlab software automatically. View/Check In the inlab software you are now in the step Check order. Check the data to decide whether you want to accept the order or reject it. Click the Next icon.

Follow the instructions given on the infinident website.

5 Accept Order The portal opens up again. Click Accept to proceed. If you want to order a SLA-model you can do so by clicking the Order model button. Follow the instructions given on the infinident website. Make sure that either you or the dentist has drawn the preparation margins, so infinident can produce a sla-model with ditched dies. Click the Close button to close the portal and get back to the inlab software.

The tooth number and the restoration type are preselected with the data from the

6 Select patient In the inlab software click the Next icon and select or create a new patient. Design change In the next step the New dialog comes up. The tooth number and the restoration type are preselected with the data from the portal. In our example Inlay. Just select the desired Design technique and proceed with OK.

7 Design/Mill The next step is drawing the margin line or in case the dentist already entered the margin line confirming (double-click) or editing the margin line. Proceed with Next.

8 Design Quadrant In the next step you can change the insertion axis if necessary. Then design and mill your restoration as usual. When you re ready to do the next restoration click the Quadrant option from the menu bar Design.

9 Second restoration: Crown posterior Click on the Connect icon and enter your login details. The portal opens up and you see that your first restoration (#2920) has a green checkmark. Click the View button for the next restoration (#2921). The following procedure is the same as with the inlay case. 1. Download and check the restoration 2. Accept order 3. Select patient 4. Select Design technique in the Design change dialog (Tooth number and restoration is already preselected with the data from the portal) 5. Draw/edit the margin line. (Note the virtually inserted inlay!) 6. Design and mill the restoration 7. Select Design Change from the menu bar

10 Third and last restoration: Crown anterior Click on the Connect icon and enter your login details. The portal opens up and you see that your first restoration (#2920) and the second restoration (#2921) have a green checkmark. Click the View button for the last restoration (#2922). The following procedure is the same as with the previous inlay or crown case. 1. Download and check the restoration 2. Accept order 3. Select patient 4. Select Design technique in the Design change dialog (Tooth number and restoration is already preselected with the data from the portal) 5. Draw/edit the margin line. (Note the virtually inserted inlay and posterior crown!) 6. Design and mill the restoration That s it! Happy Connecting! Your CEREC Connect Team

incoris Model S and incoris Model L In-House Model Milling only with Sirona inlab

CMW Product Launch CMW Product Launch incoris Model S and incoris Model L In-House Model Milling only with Sirona inlab CEREC Connect Current Process Dentist Laboratory Digital impression Check of the