Dremel Idea Builder 3D40. Various infill options are available from Simplify 3D software. Varies dependent on the infill and size of your object.

Size: px
Start display at page:

Download "Dremel Idea Builder 3D40. Various infill options are available from Simplify 3D software. Varies dependent on the infill and size of your object."

Transcription

1 Guide for Dremel Printing General information The Dremel Idea Builder 3D printer extrudes PLA plastic along a tool path to create layers much like our higher end Dimension. The Dremel however does not have the level of precision the higher end units can offer. The Dremel can print faster than the Dimension because it does not have the support material option. This means the supports must be manually removed post printing and you may have to sand down any defects caused from support. Dremel Idea Builder 3D40 Max Build Size Build Resolution Material Material Options Build Options Pricing Print Time File Types Potential Applications and Benefits 9 x 5.9 x mm PLA PLA only. Available in multiple colors. Dremel brand PLA or small spools from the resale shops. Various infill options are available from Simplify 3D software. No cost to check out. Users must supply their own filament. Potential fees for lost materials. Varies dependent on the infill and size of your object. Preprocessed STL file from Simplify 3D - Printing with this type of PLA is far cheaper than printing on the other higher end printers. - You gain more control over the printing process. - Some objects can print faster on the Dremel than other on machines. - Many material colors are available. Cost vs Time vs Quality Location:, 1232 Sullivan Access: Users must check out a kit, containing a build platform and flash drive from AOC staff. Users are responsible for these items and can face fines if lost - $15 for the platform $10 for the flash drive. There is no cost to use the machine. Users supply their own material. Checkout times are around 24 hours but we can discuss flexibility depending on your model and the printer s queue. Page: 1 of 9 Low quality but fast and lower cost.

2 File preparation in Simplify 3D Simplify 3D is used to process STL files for the Dremel 3D printer. You can find this software on all of our AOC lab computers. You need to prepare your file in this software in order to generate the necessary printing code. First, import your file to the tray by clicking the Import button and choosing your STL file. When the file is brought in, you will see it drop down onto the build platform. The platform is sized to the Dremel s actual platform so you can visualize the scale. You will also see the name of your STL in the upper left panel. Double click the name. In this panel you can manipulate the values to edit scale, orientation, and rotation. You can also simply click the Center and Arrange button to auto-orient. Next, lets preview our support structures. Go to Tools and click Customize Support Structures. In the dialog box that pops up, you can edit the Max Overhang Angle. A lower angle will yield more support structures. Hit Generate Automatic Supports to preview the support (the orange square structures). Angles within the range work well. As you are just starting out with the Dremel, allow the software to generate the support this way. As you get more experience with how the printer handles your parts, you may find that certain areas need more support or certain areas may seem to not need some support structures. In the same panel, you can edit support structures one at a time. Click the remove button under the header Manual Placement and then click on a structure to remove it. Conversely, click the add button and then click on an empty area to place a structure. Hit Done when you are finished. Page: 2 of 9

3 File preparation in Simplify 3D The next thing you must do, is add a process. A process is a profile you can edit and assign to your model. Take a look at the processes panel on the lower left side of the software. If there is a process already there, click it and hit the Delete button. Click the Add button in the bottom left of the software to begin creating your process. First, check a few important settings. Make sure you choose PLA for the material. The Dremel 3D printer only prints in PLA. Make sure the selected profile is the Dremel Idea Builder. Also, make sure you are only seeing the panel pictured in this guide below. If advanced options are shown, click Hide Advanced. NOTE: DO NOT MODIFY ANY OF THE ADVANCED SETTINGS! Doing so has the potential to severely damage the machine which you will be liable for. If you are having problems with your model or print or have any questions about settings, ask an AOC staff member and we will treat advanced options on a case by case basis. Breakdown of FFF Settings: *See the AOC s Dremel example board for visual examples of these settings. -Select Profile: Choose Dremel Idea Builder. If this profile is missing, see an AOC staff member. -Print Quality: This decides your layer height. Fast quality will yield a thicker layer height at around 0.3mm. Your path will be the most visible at this setting, but will print much faster than medium or high quality. Medium quality has a layer height of 0.2mm, and high has a layer height of 0.1mm. -Infill: Infill is the interior of your model. A higher percentage will result in a much more solid and heavy print, but will take longer to print and will use more material than a lower infill percentage. Do not go below 10% infill without first speaking to an AOC staff member. -Raft: Include a raft to allow for better adhesion to the build platform. A raft is highly recommended. -Support: If you do not have this option checked, the software will not include the support you generated previously. Printing without support is generally very risky and could lead to damage and clogging of the extruder. Speak with an AOC staff member before attempting to print without support as some models can do just fine without it. When you have chosen your settings, click the Select Models button to assign your process to your model. You can have more than one process in the software. For example, I have two models, but one of them needs to be stronger than the other so it must have more infill. You can make one process with 60% infill and assign that to the part that needs to be strong. Then, you can make another process with 15% infill and assign that to the other one. This way, you can print multiple parts with different infills, qualities, etc on the same build. After assigning your processes to models, click the Prepare to Print! button at the bottom left of the software to begin generating your tool path and print preview. If you do have more than one process, the software will ask you to select the processes you want to print. Select all the processes you made, and choose Continuous printing layer-by-layer. Hit Ok to view a job preview. Page: 3 of 9

4 File preparation in Simplify 3D You should now be able to see a colorful preview of your build. The color on the model correlates to the travel speed of the extruder head. You may also see red lines denoting travel moves. A small gray cylinder symbolizes the extruder head. At the bottom of the software, you should be able to see a few preview options. You can watch a preview build by pressing the Play/ Pause button. You can adjust the speed of this preview with the slider underneath the button. You can also move the Start and End sliders to scrub through the job. Looking through the job in this way will also give you a preview of your infill and raft. In the top left corner, you will see Build Statistics which will give you very useful information such as build time and filament consumption. Knowing your build time is important for knowing how long you will need to machine checked out. Filament consumption is important because with the Dremel, because if it runs out during a job, it will not pause itself and ask for more. It will print air and ruin your build! Make sure you have enough filament on your spool for your job or be ready when it starts to run out to pause the build, press filament and load in more filament. When you are satisfied with your job, click the Save Toolpaths to Disk button in the lower left corner so save the G-code to your flash drive. A flash drive will be provided in the kit checked out from the AOC, along with the Dremel build platform. It is important you name your file only using letters and numbers, files named with other characters may not be readable by the Dremel. If you want to go back and make changes to either your models or your processes, hit the Exit Preview Mode button to go back to the normal model view mode. You can also save out a factory file that will allow you to save your progress in the software by going to File and then Save Factory File As.... You can open this file up in Simplify 3D and continue editing. Remove the flash drive from the computer. Grab your filament spool and checked out build platform and proceed to the Dremel 3D printer itself, located in the front room of the. Page: 4 of 9

5 Dremel preparation There are a few steps to do to ready the Dremel for printing. First, with the Dremel powered off, Insert the build platform. Do so by lowering the back of the platform onto the two posts near the back of the machine. Lock the platform into the bed by pulling out the front clasp and releasing to lock into place. The platform should now be snug and locked in. Next, insert the flash drive into the front of the machine, to the right of the touch screen. Flip the power switch on the right side of the machine to power it on. Platform leveling Before you start printing or loading filament, it is a good idea to level the platform. This is not necessary but highly recommended as an unleveled platform can cause your print to fail. First, on the small touchscreen panel, choose Level. Page: 5 of 9

6 Platform leveling The platform will raise all the way to the top. Looking underneath the platform, you will see two blue knobs, one on either side of the front of the build platform. The process will begin with the left side of the bed. The screen will prompt you to turn the knob, indicating which direction you should turn it depending on whether the bed is too high or too low. Once the bed is in the correct position the screen will display a message saying ready to verify. Press the verify button in the upper right to complete the left side, and then repeat the process with the knob on the right side of the platform. Once you have adjusted and verified both knobs the touch screen will briefly display a leveling complete message and then return to the main menu. You are now ready to load your filament. Loading filament The first step to loading filament into the Dremel printer, is preparing your spool. Make sure your filament spool is tightly wound. Also check that the end of the filament has a nice clean cut edge. If needed, you can check out a 3D print kit from the AOC with a filament cutting tool. You also want your filament to be coming under and up as shown in the image to the right. Page: 6 of 9

7 Loading filament On the left side of the printer, you will see a circular door. Grasp the silver bar running through the center and twist to the left to open. Before placing your spool on the post, feed your filament through the plastic feeder tube, until you have at least three inches of filament sticking out of the other end of the tube. Once the filament is fed through the tube and accessible on the other side, place the spool on the post in the spool holder. The filament should be able to be pulled freely from the end of the tube, with no resistance from the spool. Once you have loaded the filament through the feeder tube, place the spool on the central peg in the spool holder. After the spool is in place, reattach the door to the left side of the machine by placing it in the cavity and twisting right until it locks into place. Go back to the main menu and then choose Filament. It will first prompt you to cut the current filament. If no filament is currently loaded, skip this step and press next. At this point, the extruder will heat up and purge any material left in the extruder. Once this is complete it will ask you to feed the new filament into the hole on top of the extruder. Page: 7 of 9

8 Loading filament Before pushing the filament into the hole at the top of the extruder head, first feed it through the guide attached to the top of the extruder. Once your filament is through the guide, feed it into the small hole on top of the extruder. If the filament is in the hole, press next. The extruder will begin extruding filament, and will ask you to press done once the filament being extruder is the right color. Once your filament is being extruded you are ready to return to the menu and begin printing. Printing your file The platform is level, the filament is loaded, now it is time to print. Select Build from the main menu. Next, click the icon of the flash drive, choose your file, and press Build. At this point the printer will start warming up and will print your file. The Dremel will give you an estimation of the print time on screen. We recommend that you stay with the printer during the entire process. Some prints will fail and you need to be there to correct the failure. Page: 8 of 9

9 Printing your file It is especially important that you keep a close eye on the first few minutes of your print to make sure it is adhering to the build platform. Remember that building with a raft will give your print a much better adhesion to the platform. If you see any large chunks or strings sticking to the platform that shouldn t be there, feel free to pause the print, clip those parts off, and resume the build. The build pictured on the right was paused in order to get rid of the chunky bits. If you are unsure if your part is sticking, ask an AOC staff member. Remember, during the build you can pause it and press filament to unload the old filament and load in a new spool. However, if the machine is left to completely run out, the build will be lost! Know your job s filament consumption and check often! Post-processing When your build is finished, the screen will alert you and the platform will lower to the bottom. Press down the platform lock at the front of the platform to release it and carefully pull it out. Some prints, especially those not built with a raft, can pop right off the platform by pulling it off manually. If your print is adhered strongly, check out an AOC 3D printing kit and use the clippers on the perimeter of the part. Then, slide the scraper underneath to pop it off the tray. Sometimes the part will lift right off the raft and other times the raft and support structures need to be clipped away. Remove your filament much like you loaded it by pressing the Filament option from the main menu. When the prompt asks you to Cut the filament, use scissors or wire cutters to cut the filament near where it enters the top of the machine. After this simply re-spool the filament and remove your spool from the holder. Power down the machine. Remove the platform and flash drive and return them to the AOC. Page: 9 of 9

3D Printing Getting Started!

3D Printing Getting Started! ARCHITECTURE & LANDSCAPE ARCHITECTURE 3D Printing Getting Started! White filament is free to students for academic use. Where do I buy filament? NORTH DAKOTA STATE UNIVERSITY www.makerbot.com/store www.ultimachine.com/pla

More information

UP! Quick Start Guide

UP! Quick Start Guide Personal Portable 3D Printer UP! www.pp3dp.com 1. Assemble Printer Open the box, take out the printer and accessories. Assemble the parts contained in the box as following procedure: 1. Unscrew the M4

More information

English. Quick Guide

English. Quick Guide English Quick Guide Specification Product Overview Button and Indicator light Unpacking Accessory Checklist Important Safety Notes Extruder module installation Accessory installation XYZware operation

More information

MAKERBOT For use with MakerBot Replicator Desktop 3D Printer (Fifth Generation Model)

MAKERBOT For use with MakerBot Replicator Desktop 3D Printer (Fifth Generation Model) MAKERBOT For use with MakerBot Replicator Desktop 3D Printer (Fifth Generation Model) YALE CENTER FOR ENGINEERING INNOVATION AND DESIGN Table of Contents p. 3-5... Using the MakerBot Desktop p. 6... Using

More information

ENJOY Introduction. Software Installation* Hardware. Calibration Settings. Print test. Appendex. Install print S/W Driver Install

ENJOY Introduction. Software Installation* Hardware. Calibration Settings. Print test. Appendex. Install print S/W Driver Install Quick Start Manual 1 ENJOY Introduction C O N T E N T S 6 5 Appendex 4 Print test 3 2 Hardware Calibration Settings Software Installation* Install print S/W Driver Install Hardware Intro Cable installation

More information

Quick Start Guide. including AutoMaker. Version 1.0

Quick Start Guide. including AutoMaker.  Version 1.0 Quick Start Guide including AutoMaker Version 1.0 NOT FOR MEDICAL USE Version 1.0 Welcome Package Contents Check your product package for the following items. 2m USB A-B Cable IEC C5 Power Cable Robox

More information

Objet30 Pro x 7.55 x mm. Acrylic-like plastic in solid color. White, gray, black, clear

Objet30 Pro x 7.55 x mm. Acrylic-like plastic in solid color. White, gray, black, clear Guide for 3D Printing Table of contents: Objet30 Pro Estimation: Page 5 Dimension Estimation: Page 6 Form 1+ Estimation: Page 7 General Information Location:, 1232 Sullivan Access: Technician-run; Online

More information

USER MANUAL Resolution 0.02mm Speed 300mm/second Software: Wanhao Maker

USER MANUAL Resolution 0.02mm Speed 300mm/second Software: Wanhao Maker 1 Duplicator 5S & 5S MINI Desktop 3D Printers USER MANUAL Resolution 0.02mm Speed 300mm/second Software: Wanhao Maker 2014/2015 Wanhao USA 3 Table of Contents Welcome 1 Printer Specifications 2 Unboxing

More information

ZHEJIANG FLASHFORGE 3D TECHNOLOGY CO., LTD. Creator Pro Start-up Guide

ZHEJIANG FLASHFORGE 3D TECHNOLOGY CO., LTD. Creator Pro Start-up Guide www.ff3dp.com ZHEJIANG FLASHFORGE 3D TECHNOLOGY CO., LTD. Creator Pro Start-up Guide www.ff3dp.com Contents 1 What's Included in the Box? 2 2 Un-boxing 2 3 Initial Hardware Installation 6 4 Software Installation

More information

da Vinci Jr.1.0 April 2016 da Vinci Junior 1.0w 3D Printer da Vinci Jr.1.0w Quick Guide HD23F1JW0N1

da Vinci Jr.1.0 April 2016 da Vinci Junior 1.0w 3D Printer da Vinci Jr.1.0w Quick Guide HD23F1JW0N1 da Vinci Junior 1.0w 3D Printer w Quick Guide P 1 Product Overview A: Filament movement area B: Feed module C: Detector D: Extruder E: Filament F: Print bed G G: SD card port (Storage format: FAT32) H:

More information

3-7. Set Materials (Touch Screen) Set Materials (Software) Material Weight adjustment (grams) Current material weight. Increase.

3-7. Set Materials (Touch Screen) Set Materials (Software) Material Weight adjustment (grams) Current material weight. Increase. Set Materials (Touch Screen) 3-7 Decrease Material Weight adjustment (grams) Increase Current material weight Save current settings Stop extrusion and heating Back withdraw material change material extrude

More information

da Vinci 1.0 Pro Quick Guide

da Vinci 1.0 Pro Quick Guide US da Vinci 1.0 Pro Quick Guide Product Description Print Parameters Description Support Details Product Model: da Vinci 1.0 Professional da Vinci 1.0 Pro Product Description Product Overview Cartridge

More information

DeltaMaker 3D Printer Getting Started

DeltaMaker 3D Printer Getting Started DeltaMaker 3D Printer Getting Started Last Updated: December 2014 Table of Contents TABLE OF CONTENTS 2 WELCOME 3 SECTION 1: UNPACKING/SETUP 4 REMOVING THE PRINTER FROM THE BOX 4 INSTALLING THE FILAMENT

More information

Use the To. 4 Keypad Enter numbers, letters, or symbols on the printer. Stop all printer activity. 6 Indicator light Check the status of the printer.

Use the To. 4 Keypad Enter numbers, letters, or symbols on the printer. Stop all printer activity. 6 Indicator light Check the status of the printer. Quick Reference Learning about the printer Using the control panel Use the To 4 Keypad Enter numbers, letters, or symbols on the printer. 5 Stop or Cancel button Stop all printer activity. 6 Indicator

More information

Cura: Basic 3D Printing Guide

Cura: Basic 3D Printing Guide Cura: Basic 3D Printing Guide Introduction Cura is an open-source slicer, developed by Ultimaker, for use with FFF (Fused Filament Fabrication) printers such as the PrintrBot Play. A slicer analyzes your

More information

Product User Manual. IdeaWerk 3D Printer WT150

Product User Manual. IdeaWerk 3D Printer WT150 Product User Manual IdeaWerk 3D Printer WT150 Contents Contents 1. Unpack and checking... 1 1.1 Check the Machine... 1 1.2 Check the Accessories... 3 2. Brief Introduction... 3 2.1 Precautions and Safety...

More information

ideamaker Manual

ideamaker Manual ideamaker Manual Using ideamaker... 2 Basic information... 2 What is ideamaker?... 2 Where to download ideamaker?... 2 Install ideamaker... 3 Let s Print!... 6 How to use ideamaker?... 23 Interface...

More information

3D Printing. Guide for File Prep and Submission. 3D Printing Basic Info

3D Printing. Guide for File Prep and Submission. 3D Printing Basic Info Guide for File Prep and Submission 3D Printing 3D Printing Basic Info 3D printing is a type of additive rapid prototyping where material is added one layer at a time to create a 3d object. The Dimension

More information

Dremel Digilab 3D Slicer Software

Dremel Digilab 3D Slicer Software Dremel Digilab 3D Slicer Software Dremel Digilab 3D Slicer prepares your model for 3D printing. For novices, it makes it easy to get great results. For experts, there are over 200 settings to adjust to

More information

Guide: 3D Printing Software: UP, Makerbot P 1

Guide: 3D Printing Software: UP, Makerbot P 1 Guide: 3D Printing Software: UP, Makerbot 02-09-2015 P 1 Disclaimer P 2 We can t guarantee your model will successfully print as there are many factors which can affect it. The guideline will help you

More information

Scroll through menus or move between screens and menu options. Increase the numeric value of an option or setting being displayed. Save settings.

Scroll through menus or move between screens and menu options. Increase the numeric value of an option or setting being displayed. Save settings. Quick Reference Learning about the printer Use the 5 Right arrow button To Scroll through menus or move between screens and menu options. Increase the numeric value of an option or setting being displayed.

More information

Artisan 1430 User's Guide

Artisan 1430 User's Guide Artisan 1430 User's Guide Artisan 1430 User's Guide Welcome to the Artisan 1430 User's Guide. Product Basics See these sections to learn about the basic features of your product. Printer Parts Locations

More information

Quick Start Guide See Inside for Use and Safety Information

Quick Start Guide See Inside for Use and Safety Information 3 rd Generation Personal 3D Printer Quick Start Guide See Inside for Use and Safety Information The USB Mass Storage Device Contains the User Guide and Quick Start Guide in other Languages Congratulations

More information

Cura (Documentation for version )

Cura (Documentation for version ) Cura (Documentation for version 15.04.06) Getting Started Installation To start the installation of Cura, download it first. After downloading, open the installer and run the installation wizard to complete

More information

PrismJET DTx Quick Start Guide

PrismJET DTx Quick Start Guide PrismJET DTx Quick Start Guide The following items are included in an accessory kit for your printer: USB Cable 110V Power Cord JetPRO 13/JetCUT Setup DVD User Guide CD Phillips Screwdriver Unpacking the

More information

2014 Simplify3D. Quick Start Guide

2014 Simplify3D. Quick Start Guide Quick Start Guide Preparation Installing Simplify3D Software 3 The Configuration Assistant 4 The Interface Layout 5 3D Printing Workflow Import Process Settings Preview Print! Import 7 Process Settings

More information

We have two types of plastic printer (Makerbot and Up) and one powder printer at School of Architecture.

We have two types of plastic printer (Makerbot and Up) and one powder printer at School of Architecture. 3D printers are rapid prototyping tools which make solid, threedimensional objects out of melted plastic filament. Digital models are translated into instructions for the 3D printer (3d models are converted

More information

Dremel 3D Printer 3D40 Workflow Computation + Construction Lab Iowa State University

Dremel 3D Printer 3D40 Workflow Computation + Construction Lab Iowa State University Dremel 3D Printer 3D40 Workflow Computation + Construction Lab Iowa State University Dremel Idea Builder 3D40 If you have any technical issues with this 3D printer please contact Dremel 3D Idea Builder

More information

ideamaker Manual

ideamaker Manual ideamaker Manual www.raise3d.com 1 Using ideamaker... 3 1.1 What is ideamaker?... 3 1.2 Where to download ideamaker?... 3 2 Install ideamaker... 4 3 Let s Print!... 9 3.1 Import.STL files... 9 3.2 Slice

More information

CareFusion. Overview of the CareFusion Device. Press Red button on top right-hand corner to turn device on and off

CareFusion. Overview of the CareFusion Device. Press Red button on top right-hand corner to turn device on and off Tim Hamill, M.D. Digitally signed by Tim Hamill, M.D. DN: cn=tim Hamill, M.D., o, ou=ucsf Clinical Laboratories, email=hamillt@labmed2.ucsf.edu, c=us Date: 2009.04.20 20:57:31-07'00' CareFusion Summary:

More information

Check the status of the printer. 7 USB port Connect a USB a flash drive to the printer. Note: Only the front USB port supports flash drives.

Check the status of the printer. 7 USB port Connect a USB a flash drive to the printer. Note: Only the front USB port supports flash drives. Quick Reference Use the 6 Indicator light Check the status of the printer. Learning about the printer Using the printer control panel 7 USB port Connect a USB a flash drive to the printer. Note: Only the

More information

4 Keypad Lets you enter numbers, letter, or symbols. 5 Submit Lets you submit changes made in the printer settings

4 Keypad Lets you enter numbers, letter, or symbols. 5 Submit Lets you submit changes made in the printer settings Quick Reference Learning about the printer Understanding the printer control panel 1 2 3 4 7 1 @!. 2 A B C 3 D E F 4 G H I 5 J K L 6 M N O 7 P Q R S 8 T U V 9 W X Y Z * 0 # 6 5 Item Description 3 Sleep

More information

Dreamer Series User Manual

Dreamer Series User Manual Dreamer Series User Manual Welcome to the world of the Dreamer. To ensure that you have the best possible user experience, it s important that you follow this user manual. Let s get started! In Parts I

More information

MONARCH 9416 XL QUICK REFERENCE

MONARCH 9416 XL QUICK REFERENCE MONARCH 9416 XL QUICK REFERENCE This Quick Reference contains ribbon loading, supply loading, and general care, maintenance, and troubleshooting procedures for the 9416 XL Thermal Direct and 9416 XL Thermal

More information

M2 3D Printer V4 M2 3D Printer

M2 3D Printer V4 M2 3D Printer M2 3D Printer V4 Contents 2 Important Safeguards 3 Welcome 4 M2 Features 6 Other products included with your printer 7 Set up 9 Slicing.STL or.obj files 10 Maintenance and Support 11 Warranty 12 About

More information

USER MANUAL.

USER MANUAL. 150 USER MANUAL www.quant3d.com 1. Introduction 1. INTRODUCTION... 3 1.1 HOW TO USE THIS MANUAL... 3 1.2PRECAUTIONS... 3 1.2.1 Safety... 3 1.2.2 Protection... 4 2. OVERVIEW... 5 2.1 APPEARANCE... 5 2.2

More information

Loading paper and specialty media Learning about the printer. Stop all printer activity. 7 Back button Return to the previous screen.

Loading paper and specialty media Learning about the printer. Stop all printer activity. 7 Back button Return to the previous screen. Quick Reference Use the 6 Stop or Cancel button To Stop all printer activity. Loading paper and specialty media Learning about the printer Using the printer control panel 0 Use the 9 To Display View the

More information

Section 1- Sketchup (or other 3D modeler): How do render a file that can be printed

Section 1- Sketchup (or other 3D modeler): How do render a file that can be printed Using the 3D Printer (Makerbot) - BETA Contents: Section 1 Sketchup: How do draw a file that can be 3-D printed Section 2 Sketchup: Exporting STL Section 3 MakerWare: Preparing your file Section 4 Printing!

More information

Personal 3D Printer. Quick Start Guide. See Inside for Use and Safety Information

Personal 3D Printer. Quick Start Guide. See Inside for Use and Safety Information EKOCYCLE TM Personal 3D Printer Quick Start Guide See Inside for Use and Safety Information The USB Mass Storage Device Contains the User Guide and Quick Start Guide in other Languages Congratulations

More information

A GUIDE TO GETTING STARTED

A GUIDE TO GETTING STARTED Florida Public Library Printing A GUIDE TO GETTING STARTED Prepared for the Florida Public Library by Robert Persing Table of Contents Section-A. Download the software... 3 Section-B. Install the software...

More information

da Vinci Super Quick Guide da Vinci Super Safety Precautions Product instructions Unboxing and Installation Product specification

da Vinci Super Quick Guide da Vinci Super Safety Precautions Product instructions Unboxing and Installation Product specification September. 2017 da Vinci Super Quick Guide ENG Safety Precautions Product instructions Unboxing and Installation Product specification Function Operation and Instructions Setting Print Supporting information

More information

Technical Support: CUBE USER MANUAL

Technical Support: CUBE USER MANUAL CUBE THE DESKTOP 3D PRINTER USER MANUAL 2012-12-05 1 Contents 1 Installing software...3 1.1 Installing Python... 3 1.2 Installing ReplicatorG... 5 2 Pre-print checks...9 2.1 Power up...9 2.2 Connect to

More information

ipad Mini Wi-Fi Front Facing Camera Replacement

ipad Mini Wi-Fi Front Facing Camera Replacement ipad Mini Wi-Fi Front Facing Camera Replacement Replace the Front Facing Camera in your ipad Mini Wi-Fi. Written By: Andrew Optimus Goldberg ifixit CC BY-NC-SA www.ifixit.com Page 1 of 42 INTRODUCTION

More information

Index. About 3D Printing. About Print Studio. Working with a 3D Printer. To Import a Model. Working with Files. Working with a Model Layout

Index. About 3D Printing. About Print Studio. Working with a 3D Printer. To Import a Model. Working with Files. Working with a Model Layout User Manual Index About 3D Printing About Print Studio Working with a 3D Printer To Import a Model Working with Files Working with a Model Layout Working with Model Repairs Working with Model Supports

More information

ideamaker Manual

ideamaker Manual ideamaker Manual www.raise3d.com 1 Using ideamaker... 3 1.1 What is ideamaker?... 3 1.2 Where to download ideamaker?... 3 2 Install ideamaker... 4 3 Let s Print!... 9 3.1 Import.STL files... 9 3.2 Slice

More information

DeeControl User Manual

DeeControl User Manual The setup, service, and functions of the DeeControl slicing software DeeControl User Manual Version 1.1 - 2 - Content 2. Introduction...- 4-3. Minimum requirements...- 4-4. Installation...- 4-5. Launching

More information

SolidWorks Intro Part 1b

SolidWorks Intro Part 1b SolidWorks Intro Part 1b Dave Touretzky and Susan Finger 1. Create a new part We ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select File New Templates IPSpart If the SolidWorks

More information

imac Intel 21.5" Retina 4K Display (2017) RAM

imac Intel 21.5 Retina 4K Display (2017) RAM imac Intel 21.5" Retina 4K Display (2017) RAM Replacement Learn how to replace or upgrade the RAM in your 2017 Retina 4K imac. Written By: Evan Noronha ifixit CC BY-NC-SA www.ifixit.com Page 1 of 38 INTRODUCTION

More information

SolidWorks 2½D Parts

SolidWorks 2½D Parts SolidWorks 2½D Parts IDeATe Laser Micro Part 1b Dave Touretzky and Susan Finger 1. Create a new part In this lab, you ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select

More information

Instruction Manual. RS 3D Printer

Instruction Manual. RS 3D Printer Instruction Manual RS 3D Printer 1) GENERAL This instruction manual contains important information regarding the installation, operation, maintenance and storage for RS 3D Printer. Please read these instructions

More information

DeskCNC setup and operation manual

DeskCNC setup and operation manual DeskCNC setup and operation manual This document explains how to install, setup and cut foam shapes using DeskCNC 4 axis foam cutting software. The document will go through a step by step process of how

More information

Quickstart Guide Kora Pro 3D PC Printer

Quickstart Guide Kora Pro 3D PC Printer Quickstart Guide Kora Pro 3D PC Printer 1 Rev001/01/2018 Kora Pro PC General Precautions and Advice Only use original accessories from or approved by the manufacturer Always read the manual before initial

More information

Advanced Printing. This article will take you to get to know the advanced printing skills.

Advanced Printing. This article will take you to get to know the advanced printing skills. Advanced Printing This article will take you to get to know the advanced printing skills. There are two modes are available for users, one is Basic Mode and the other is Expert Mode. Expert Mode grants

More information

Quick Installation Guide Direct and Transfer Thermal Printer

Quick Installation Guide Direct and Transfer Thermal Printer Quick Installation Guide Direct and Transfer Thermal Printer Overview The enclosed printer is currently comprised of two models: 203dpi (dots per inch) model 300dpi (dots per inch) model Unpacking 1. Remove

More information

Thank you for purchasing a ZT-1300 printer! The following guide will help you install the equipment and software that goes with your ZT-1300 printer.

Thank you for purchasing a ZT-1300 printer! The following guide will help you install the equipment and software that goes with your ZT-1300 printer. Thank you for purchasing a ZT-1300 printer! The following guide will help you install the equipment and software that goes with your ZT-1300 printer. It is strongly recommended that you read through the

More information

Legal Notes. Regarding Trademarks. Models supported by the GX printer driver KYOCERA Document Solutions Inc.

Legal Notes. Regarding Trademarks. Models supported by the GX printer driver KYOCERA Document Solutions Inc. Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for any problems arising from

More information

TT230SM THERMAL TRANSFER PRINTER USER S MANUAL

TT230SM THERMAL TRANSFER PRINTER USER S MANUAL TT230SM THERMAL TRANSFER PRINTER USER S MANUAL Operations Overview Unpacking and Inspection This printer has been specially packaged to withstand damage during shipping. Please carefully inspect the packaging

More information

8 USB port Connect a flash drive to the printer. Notes:

8 USB port Connect a flash drive to the printer. Notes: Quick Reference Using the 2.4-inch display printer model Learning about the printer Using the printer control panel 3 2 3 4 5 6 7 Use the 2 To 0 Display View the printer status and messages. 2 Left arrow

More information

Quick Reference Guide. ineo 3301P

Quick Reference Guide. ineo 3301P ineo 3301P Contents 1 Learning about the printer... 3 Using the printer control panel... 3 Understanding the colors of the Sleep button and indicator lights... 4 Setting the paper size and type... 5 Configuring

More information

I-Carver CNC Project Computer Directions. Rob MacIlreith Last Update Oct 2017

I-Carver CNC Project Computer Directions. Rob MacIlreith Last Update Oct 2017 I-Carver CNC Project Computer Directions Rob MacIlreith Last Update Oct 2017 READ THIS ENTIRE SLIDE FIRST Make sure you follow all the directions carefully. Mistakes in programming your design can be disastrous

More information

PowerSpec Ultra 3D Printer Start-up Guide Table of Contents

PowerSpec Ultra 3D Printer Start-up Guide Table of Contents PowerSpec Ultra 3D Printer Start-up Guide Table of Contents 1 What's Included in the Box?...Page 3 2 Un-boxing.Page 4 3 Initial Hardware Installation Page 6 4 Software Instruction.Page 8 5 Filament Page

More information

Geeetech Duplicator 5 3D printer. User Manual

Geeetech Duplicator 5 3D printer. User Manual Geeetech Duplicator 5 3D printer User Manual Contents Safety Instructions... 4 1.Software Resources... 5 1.1 Repetier-Host... 5 1.2 Driver... 5 1.3 Arduino IDE... 6 2.Connect the Printer... 6 3.Printer

More information

ipad Mini 2 Wi-Fi Front Panel Assembly Replacement

ipad Mini 2 Wi-Fi Front Panel Assembly Replacement ipad Mini 2 Wi-Fi Front Panel Assembly Replacement Fix a broken ipad Mini 2 screen. Replace the front glass and digitizer on an ipad Mini 2 Wi-Fi. Written By: Sam Lionheart ifixit CC BY-NC-SA www.ifixit.com

More information

Stratasys TUTORIAL. For both the dimension bst 1200es and F370

Stratasys TUTORIAL. For both the dimension bst 1200es and F370 Stratasys TUTORIAL For both the dimension bst 1200es and F370 TABLE OF CONTENTS Simplify or Split parts for improved results... 20 FAQs... 21 STEP 1: HAVE YOUR.STL FILE READY... 1 STEP 2: TURN ON THE PRINTER...

More information

3D SYSTEMS University CubeX 3D Printer

3D SYSTEMS University CubeX 3D Printer 3D SYSTEMS University CubeX 3D Printer Lesson Leveling the Print Pad and Print Tips, Setting the Z-Gap Revision date: 10/22/13 1 1 2016 年 6 月 14 日 Objectives After completing this lesson you will: Be able

More information

Written By: John Sutton

Written By: John Sutton Replacing the fan on your HP g7-2275 dx. Written By: John Sutton ifixit CC BY-NC-SA www.ifixit.com Page 1 of 20 INTRODUCTION Laptop cooking your lap? This guide will walk you through replacing your fan.

More information

Portable Qi Charger. Created by Ruiz Brothers. Last updated on :20:38 AM UTC

Portable Qi Charger. Created by Ruiz Brothers. Last updated on :20:38 AM UTC Portable Qi Charger Created by Ruiz Brothers Last updated on 2017-12-05 01:20:38 AM UTC Guide Contents Guide Contents Overview Prerequisite Guides Parts, Tool & Supplies Universal Qi Wireless Charging

More information

Manual for MantraJet 1100 CD/DVD auto-printer

Manual for MantraJet 1100 CD/DVD auto-printer Manual for MantraJet 1100 CD/DVD auto-printer Rev 1.03 September 7, 2010 Table of contents Specifications...3 Unpacking MantraJet 1100...4 Quick installation reference MantraJet 1100...7 Installation of

More information

Written By: Ben Eisenman

Written By: Ben Eisenman iphone 3GS Rear Panel Replacement Replace a broken rear case on your iphone 3GS. Written By: Ben Eisenman ifixit CC BY-NC-SA www.ifixit.com Page 1 of 22 INTRODUCTION The plastic rear half of the iphone.

More information

SeeMeCNC Guides. Setting Up Simplify 3D

SeeMeCNC Guides. Setting Up Simplify 3D SeeMeCNC Guides Setting Up Simplify 3D This guide will walk you through the steps of setting up S3D for slicing and printing on your SeeMeCNC printer. Written By: Jim Carter 2017 seemecnc.dozuki.com Page

More information

9 Start button Start a job, depending on which mode is selected. 10 Fax button Send faxes. 11 Back button Return to the previous screen.

9 Start button Start a job, depending on which mode is selected. 10 Fax button Send faxes. 11 Back button Return to the previous screen. Quick Reference Use the To 9 Start button Start a job, depending on which mode is selected. > Settings > > Paper Menu > > Paper Size/Type > Learning about the printer Using the printer control panel 10

More information

Table of Contents. Unpacking and Inspection Setup Loading the Media Mount the Printer on the Wall... 16

Table of Contents. Unpacking and Inspection Setup Loading the Media Mount the Printer on the Wall... 16 WPL25/WHC25 Table of Contents Unpacking and Inspection... 1 Setup... 5 Loading the Media... 6 Mount the Printer on the Wall... 16 LED and Button Functions... 17 Troubleshooting... 18 Unpacking and Inspection

More information

Prism Starter Guide 1.0 Hoskins Lab Last Modified 03/14/2017 Chris DeCiantis

Prism Starter Guide 1.0 Hoskins Lab Last Modified 03/14/2017 Chris DeCiantis Start Up: Upon entering the laser room turn on the wall mounted Laser Power Button by pulling it away from the wall. Turn on Shutter controllers (toggle switch on back of unit). There should be a U in

More information

Afinia. 3D Printer. Version 1.0

Afinia. 3D Printer. Version 1.0 Afinia 3D Printer Version 1.0 2 TABLE OF CONTENTS Introduction... 5 Safety Precautions... 5 Protection... 5 Overview... 6 Unpacking the Afinia H-Series 3D Printer... 7 Installing the Afinia H-Series 3D

More information

QUICK START GUIDE ENTER AN ENVIRONMENT OF PROFESSIONAL 3D PRINTING

QUICK START GUIDE ENTER AN ENVIRONMENT OF PROFESSIONAL 3D PRINTING QUICK START GUIDE ENTER AN ENVIRONMENT OF PROFESSIONAL 3D PRINTING MEET THE ZORTRAX M200 Zortrax M200 3D printer transforms virtual projects into three-dimensional reality. It is used to prototype and

More information

Running a Job on the Large Mill

Running a Job on the Large Mill Running a Job on the Large Mill Digital Media Tutorial Written by Trevor Williams Turning On the Machine Flip the breaker switch on the front right of the lower part of the controller box to the ON position.

More information

imac Intel 27" EMC 2639 Hard Drive

imac Intel 27 EMC 2639 Hard Drive imac Intel 27" EMC 2639 Hard Drive Replacement Replace the Hard Drive in your imac Intel 27" EMC 2639. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 26 INTRODUCTION Replacing the

More information

MantraJet 1100 CD/DVD autoprinter Operator s manual

MantraJet 1100 CD/DVD autoprinter Operator s manual MantraJet 1100 CD/DVD autoprinter Operator s manual Rev 1.00 May 7, 2008 Table of contents 1. Specifications.. Page 2 2. Unpacking you MantraJet 1100 Page 3 3. Using your autoprinter for the first time.

More information

4. Using Cura to Set Up Your Auto-Leveling Probe and Create Your First Print

4. Using Cura to Set Up Your Auto-Leveling Probe and Create Your First Print 4. Using Cura to Set Up Your Auto-Leveling Probe and Create Your First Print Give a short summary. Written By: Printrbot Support INTRODUCTION Outline what you are going to teach someone how to do. 2015

More information

Figure 1: Diagram of a 3D printer. You can find the most up-to-date version of this manual in electronic format on our website:

Figure 1: Diagram of a 3D printer. You can find the most up-to-date version of this manual in electronic format on our website: INTRODUCTION What is a 3D printer? A 3D printer (see Figure 1) is a device that is able to create solid three-dimensional objects using a design produced on a computer. Currently, there are various technologies

More information

MultiVision Operating Instructions

MultiVision Operating Instructions Innovation. Quality. Performance. Best in Industry. Worldwide. 1 MultiVision Operating Instructions MultiVision offers operators the option in completing various projects to use cameras for setting up

More information

Motorola Droid X Camera Replacement

Motorola Droid X Camera Replacement Motorola Droid X Camera Replacement Written By: Gage ifixit CC BY-NC-SA www.ifixit.com Page 1 of 24 TOOLS: 64 Bit Driver Kit (1) ifixit Opening Tools (1) ifixit CC BY-NC-SA www.ifixit.com Page 2 of 24

More information

3 Sleep button Enable Sleep mode or Hibernate mode. Notes:

3 Sleep button Enable Sleep mode or Hibernate mode. Notes: Quick Reference Use the To 3 Sleep button Enable Sleep mode or Hibernate mode. Indicator light color and its corresponding printer status Indicator light Printer status Off The printer is off or in Hibernate

More information

Premiere Pro Desktop Layout (NeaseTV 2015 Layout)

Premiere Pro Desktop Layout (NeaseTV 2015 Layout) Premiere Pro 2015 1. Contextually Sensitive Windows - Must be on the correct window in order to do some tasks 2. Contextually Sensitive Menus 3. 1 zillion ways to do something. No 2 people will do everything

More information

think big, print huge

think big, print huge think big, print huge quick start guide Table of Contents a Receiving and uncrating 5 b bed level & z home 11 c Loading filament 19 d SOFTWARE 23 e Setup 23 f preparing a print 26 g printing on gigabot

More information

Please carefully read the safety instructions before get started.

Please carefully read the safety instructions before get started. Safety Instructions Please carefully read the safety instructions before get started. ANYCUBIC 3D printer generates high temperature. Do not reach inside of the printer during operation. Allow time for

More information

Setup Guide. Confirming the Installation Space. Installation space (W x D x H) 70.5 x 66.3 x 61.5 inches (1790 x 1684 x 1560 mm) 23.

Setup Guide. Confirming the Installation Space. Installation space (W x D x H) 70.5 x 66.3 x 61.5 inches (1790 x 1684 x 1560 mm) 23. Introductory Information Setup Guide ENGLISH Read this manual before attempting to operate the printer. Keep this manual in a handy location for future reference. Caution Instructions in this Setup Guide

More information

Removal and Installation8

Removal and Installation8 8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever

More information

CNC Knife. VCarve Pro V8 Software Setup for CNC Knife Jobs:

CNC Knife. VCarve Pro V8 Software Setup for CNC Knife Jobs: CNC Knife VCarve Pro V8 Software Setup for CNC Knife Jobs: 1. 2. Run VCarve Pro V8 (Note: VCarve Pro V7 - Shopbot Edition will NOT work) Choose File->Open and select the.dxf file that contains the lines

More information

Ender 3 Series 3D Printer Quick Start Guide

Ender 3 Series 3D Printer Quick Start Guide Ender 3 Series 3D Printer Quick Start Guide This guide is for the Ender 3 Series of 3D printers. Select the correct input voltage to match your local mains (220V or 110V) Because of software/hardware upgrades

More information

iphone 3G Headphone Jack Replacement Replace a broken audio port in an iphone 3G. Written By: irobot ifixit CC BY-NC-SA

iphone 3G Headphone Jack Replacement Replace a broken audio port in an iphone 3G. Written By: irobot ifixit CC BY-NC-SA iphone 3G Headphone Jack Replacement Replace a broken audio port in an iphone 3G. Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION No audio? Replace the headphone jack! TOOLS:

More information

New Ricoh 1060 Copier. August 2004

New Ricoh 1060 Copier. August 2004 New Ricoh 1060 Copier August 2004 Step By Step Turn Main Power Switch ON Press operation switch to make ON indicator light up You may turn just the operation switch off at night DO NOT turn main power

More information

HP Pavilion dv7-6c90us Cooling fan Replacement

HP Pavilion dv7-6c90us Cooling fan Replacement HP Pavilion dv7-6c90us Cooling fan Replacement This guide will walk you through the process of replacing the cooling fan in an HP Pavilion dv7 laptop. Written By: Angelina Clayton ifixit CC BY-NC-SA www.ifixit.com

More information

3D Printing Getting Started!

3D Printing Getting Started! ARCHITECTURE & LANDSCAPE ARCHITECTURE 3D Printing Getting Started! White filament is free to students for academic use. Where do I buy filament? NORTH DAKOTA STATE UNIVERSITY www.makerbot.com/store www.ultimachine.com/pla

More information

User Manual V 0.1. Download the full user manual at

User Manual V 0.1. Download the full user manual at User Manual V 0.1 Download the full user manual at www.afinia.com/support Index Chapter 1 Product Description Chapter 2 Prepare for Your First 3D Print Chapter 3 Machine Settings Chapter 4 Print Settings

More information

A Guide to Processing Photos into 3D Models Using Agisoft PhotoScan

A Guide to Processing Photos into 3D Models Using Agisoft PhotoScan A Guide to Processing Photos into 3D Models Using Agisoft PhotoScan Samantha T. Porter University of Minnesota, Twin Cities Fall 2015 Index 1) Automatically masking a black background / Importing Images.

More information

FDM TUTORIAL Stratasys Dimension bst 1200es

FDM TUTORIAL Stratasys Dimension bst 1200es FDM TUTORIAL Stratasys Dimension bst 1200es TABLE OF CONTENTS STEP 1: HAVE YOUR.STL FILE READY... 1 STEP 2: TURN ON THE FDM PRINTER... 2 STEP 3: IMPORT YOUR.STL FILE TO GrabCAD Print... 3 STEP 4: REVIEW

More information

Quicksilver 606 TR-606 CPU Upgrade

Quicksilver 606 TR-606 CPU Upgrade Quicksilver 606 TR-606 CPU Upgrade D650C 128 Installation Guide Social Entropy Electronic Music Instruments TABLE OF CONTENTS WARNINGS... 1 OVERVIEW... 2 WHAT'S IN THE BOX... 3 OPENING THE TR-606 CASE...

More information

Stop all printer activity. Note: A list of options is displayed once Stopped appears on the display. Return to the previous screen.

Stop all printer activity. Note: A list of options is displayed once Stopped appears on the display. Return to the previous screen. Quick Reference Using the non-touch-screen printer model Learning about the printer Using the four-arrow-button printer control panel 0 Use the 3 4 5 To 9 8 7 4 7 ABC 3 DEF GHI 5 JKL 6 MNO PQR 8 STU 9

More information

Instrument User Manual Update RAM209AEN

Instrument User Manual Update RAM209AEN Instrument User Manual Update ABX Pentra 60C+, Pentra 80, Pentra XL 80, Pentra 400, abc VET OKI B4600 Printer use Please, take note of the modifications on next pages. Please, cross out the appropriate

More information