Brocade EFC Manager Software

Size: px
Start display at page:

Download "Brocade EFC Manager Software"

Transcription

1 Copyright Brocade Communications Systems, Inc. All rights reserved. 3/7/08 Brocade EFC Manager Software Upgrade Instructions Release 9.7 P/N This document provides instructions for upgrading the Enterprise Fabric Connectivity Manager (EFCM) products: NOTE To improve readability, this document refers to the release number of the application as 9.7 instead of the official release number System Requirements Upgrading the Application Reverting to a Previous Release Uninstalling the Application

2 Copyright , Brocade Communications Systems, Incorporated. Brocade, the Brocade B weave logo, Fabric OS, File Lifecycle Manager, MyView, Secure Fabric OS, SilkWorm, and StorageX are registered trademarks and the Brocade B wing logo and Tapestry are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. FICON is a registered trademark of IBM Corporation in the U.S. and other countries. All other brands, products, or service names are or may be trademarks or service marks of, and are used to identify, products or services of their respective owners. Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without notice, and assumes no responsibility for its use. This informational document describes features that may not be currently available. Contact a Brocade sales office for information on feature and product availability. Export of technical data contained in this document may require an export license from the United States government. The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity with respect to any loss, cost, liability, or damages arising from the information contained in this book or the computer programs that accompany it. The product described by this document may contain open source software covered by the GNU General Public License or other open source license agreements. To find-out which open source software is included in Brocade products, view the licensing terms applicable to the open source software, and obtain a copy of the programming source code, please visit Brocade Communications Systems, Incorporated Corporate Headquarters Brocade Communications Systems, Inc Technology Drive San Jose, CA Tel: Fax: info@brocade.com European and Latin American Headquarters Brocade Communications Switzerland Sàrl Centre Swissair Tour A - 2ème étage 29, Route de l'aéroport Case Postale 105 CH-1215 Genève 15 Switzerland Tel: Fax: emea-info@brocade.com Asia-Pacific Headquarters Brocade Communications Singapore Pte. Ltd. 9 Raffles Place #59-02 Republic Plaza 1 Singapore Tel: Fax: apac-info@brocade.com 2

3 System Requirements System Requirements NOTE When managing large fabrics, we recommend that you use a platform meeting at least the recommended requirements for both server and client. The SAN Management application has the following client and server system requirements: For the latest device-compatibility information (including model number and firmware levels) please go to the website and follow the instructions to access the Compatibility Matrix. Enterprise Edition License A maximum of 25 Clients are allowed per Server. The Server supports unlimited discovered ports. Standard Edition License A maximum of 2 Clients are allowed per Server. The Server supports up to 140 discovered ports. Server Requirements NOTE When managing large fabrics, we recommend that you use a platform meeting at least the recommended requirements for both server and client. You have the choice of running the SAN Management application on a management server supplied by Brocade or IBM or providing your own management server. When using a management server supplied by Brocade or IBM, the recommended configuration is already set. However, when using your own management server, use following recommendations for your platform. 3

4 System Requirements TABLE 1 1 U Server Requirements Minimum Recommended Processor 2.0 GHz Intel Pentium GHz Intel Pentium 4 Hardware CD-ROM CD-ROM Operating System Windows 2000 Professional with service pack 4 NOTE: IPv6 addresses are not supported in Windows Windows 2003 Server Standard Edition with service pack 1 Windows 2003 Server Standard Edition with service pack 1 Memory 1 GB 2 GB Graphics Card 8MB VGA MB VGA-256 Hard Drive 40 GB 40 GB ATA-100 IDE (7200 rpm) Modem 56K, v.92 data/fax modem, PCI 56K, v.92 data/fax modem, PCI Ethernet NIC 10/100 Mbps Ethernet LAN card 10/100 Mbps Ethernet LAN card 4

5 System Requirements TABLE 2 Windows Server Requirements Processor 2.0 GHz Intel Pentium 4 Hardware Operating System CD-ROM Windows 2000 Professional with service pack 4 NOTE: IPv6 addresses are not supported in Windows Windows 2000 Server with service pack 4 Windows 2000 Advanced Server with service pack 4 Windows Server 2003 Enterprise Edition with service pack 1 Windows XP with service pack 2 Memory Disk Space 1 GB 2 GB Video Requirements 8MB VGA-256 Resolution 256 colors 5

6 System Requirements TABLE 3 Processor Hardware Solaris Server Requirements Solaris UltraSparc IIi and up CD-ROM Operating System Solaris 9 or 10 Memory Disk Space Video Requirements Resolution 1 GB 2 GB 8MB 8-bit color 256 colors NOTE Approximately 1.3 GB of space is necessary on the /tmp directory of Solaris systems to install the application. NOTE EFCM for Solaris, includes all of the features of EFCM except the Backup feature. TABLE 4 Linux Server Requirements Processor 2.0 GHz Intel Pentium 4 Hardware CD-ROM Operating System Red Hat Enterprise Linux ES 3.0 Red Hat Enterprise Linux ES 4.0 Redhat 9.0 kernel v SuSE Linux 9.2 SuSE Linux 9.3 Memory Disk Space Video Requirements Resolution 1 GB 2 GB 8MB 8-bit color 256 colors 6

7 System Requirements Client Requirements NOTE When managing large fabrics, we recommend that you use a platform meeting at least the recommended requirements for both server and client. The Client system running the SAN Management application must meet the following requirements. TABLE 5 Windows Client Requirements Processor 2.0 GHz Intel Pentium 4 Hardware Operating System CD-ROM Windows 2000 Professional with service pack 4 NOTE: IPv6 addresses are not supported in Windows Windows 2000 Server with service pack 4 Windows 2000 Advanced Server with service pack 4 Windows Server 2003 Enterprise Edition with service pack 1 Windows XP with service pack 2 Memory Disk Space 1 GB 2 GB Video Requirements 8MB VGA-256 Resolution 256 colors 7

8 System Requirements TABLE 6 Processor Hardware Solaris Client Requirements Solaris UltraSparc IIi and up CD-ROM Operating System Solaris 9 or 10 Memory Disk Space Video Requirements Resolution 1 GB 2 GB 8MB 8-bit color 256 colors TABLE 7 Linux Client Requirements Processor 2.0 GHz Intel Pentium 4 Hardware CD-ROM Operating System Red Hat Enterprise Linux ES 3.0 Red Hat Enterprise Linux ES 4.0 Redhat 9.0 kernel v SuSE Linux 9.2 SuSE Linux 9.3 Memory Disk Space Video Requirements Resolution 1 GB 2 GB 8MB 8-bit color 256 colors 8

9 Upgrading the Application Follow these instructions to upgrade the application on your system. NOTE SANavigator Software and EFCM Software cannot run on the same machine, even if one of the products is running as a service. ATTENTION! Be sure to keep the current version of your software. If you need to restore a previous version in the future, you will need to reinstall your previous version before installing the new version in order to ensure that the backup functionality functions correctly. For more information, refer to the Reverting to a Previous Release on page 87. Select from the following procedures to upgrade from your current version of the software: TABLE 8 Upgrade Paths Current Software Release EFCM 7.2 on Windows Systems EFCM 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.5, 8.6, or on Windows Systems EFCM 8.7, 8.7.1, 8.8, 8.9, or on Windows Systems EFCM 9.0, 9.1, 9.1.1, 9.5, or 9.6 on Windows Systems Upgrade Path Procedure(s) Note: If you have EFCM 6.X, 7.0, or 7.1 software, you must upgrade to EFCM 7.2, then upgrade to EFCM 9.1, before you can upgrade to EFCM 9.7. To upgrade from EFCM 7.2, complete the following procedures. 1. Upgrading from EFCM 7.2 to EFCM 9.1 on Windows Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems on page 25 To upgrade from EFCM 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.5, 8.6, or 8.6.1, complete the following procedures. 1. Upgrading from EFCM 8.0 through to EFCM 9.1 on Windows Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems on page 25 To upgrade from EFCM 8.7, 8.7.1, 8.8, 8.9, or 8.9.1, complete the following procedure. Upgrading from EFCM 8.7 through to EFCM 9.7 on Windows Systems on page 21 To upgrade from EFCM 9.0, 9.1, 9.1.1, 9.5, or 9.6, complete the following procedure. Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems on page 25 9

10 TABLE 8 Upgrade Paths Current Software Release Connectrix Manager 9.7 to EFCM 9.7 on Windows Systems EFCM 9.7 to Connectrix Manager 9.7 on Windows Systems HAFM or 8.8 on Windows Systems HAFM on Windows Systems SANavigator 4.0, 4.1, or on Windows Systems SANavigator 4.2 or on Windows Systems Upgrade Path Procedure(s) To upgrade from Connectrix Manager 9.7, complete the following procedure. Upgrading from Connectrix Manager 9.7 to EFCM 9.7 on Windows Systems on page 29 To upgrade from EFCM 9.7, complete the following procedure. Upgrading from Connectrix Manager 9.7 to EFCM 9.7 on Windows Systems on page 29 To upgrade from HAFM or 8.8, complete the following procedures. 1. Upgrading from HAFM to HAFM on Windows Systems on page Upgrading from HAFM 8.8 and to EFCM 9.6 on Windows Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems on page 25 Note: If you have HAFM 8.6 or earlier software, you must upgrade to HAFM 8.9.1, then upgrade to EFCM 9.6, before you can upgrade to EFCM 9.7. To upgrade from HAFM 8.9.1, complete the following procedures. 1. Upgrading from HAFM 8.8 and to EFCM 9.6 on Windows Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems on page 25 To upgrade from SANavigator 4.0, 4.1, or 4.1.1, complete the following procedures. 1. Upgrading from SANavigator 4.0, 4.1, or to EFCM 9.1 on Windows Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems on page 25 Note: If you have SANavigator 3.5 software, you must upgrade to SANavigator before you can upgrade to EFCM 9.7. To upgrade from SANavigator 4.2 or 4.2.1, complete the following procedure. 1. Upgrading from SANavigator 4.2 or to EFCM 9.6 on Windows Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems on page 25 10

11 TABLE 8 Upgrade Paths Current Software Release SAN Manager on Windows Systems EFCM 7.2 on UNIX Systems EFCM 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.5, 8.6, or on UNIX Systems EFCM 8.7, 8.7.1, 8.8, 8.9, or on UNIX Systems EFCM 9.0, 9.1, 9.5, or 9.6 on UNIX Systems Upgrade Path Procedure(s) To upgrade from SAN Manager 4.2.1, complete the following procedures. 1. Upgrading from SAN Manager 4.X to SANavigator on Windows Systems on page Upgrading from SANavigator 4.2 or to EFCM 9.6 on Windows Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems on page 25 Note: If you have EFCM 6.X, 7.0, or 7.1 software, you must upgrade to EFCM 7.2, then upgrade to EFCM 9.1, before you can upgrade to EFCM 9.7. To upgrade from EFCM 7.2, complete the following procedures. 1. Upgrading from EFCM 7.2 to EFCM 9.1 on UNIX Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on UNIX Systems on page 72 To upgrade from EFCM 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.5, 8.6, or 8.6.1, complete the following procedures. 1. Upgrading from EFCM 8.0 Through to EFCM 9.1 on UNIX Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on UNIX Systems on page 72 To upgrade from EFCM 8.7, 8.7.1, 8.8, 8.9, or 8.9.1, complete the following procedures. Upgrading from EFCM 8.7 through to EFCM 9.7 on UNIX Systems on page 70 To upgrade from EFCM 9.0, 9.1, 9.5, or 9.6, complete the following procedure. Upgrading from EFCM 9.X to EFCM 9.7 on UNIX Systems on page 72 11

12 TABLE 8 Upgrade Paths Current Software Release SANavigator 4.0, 4.1, or on UNIX Systems SANavigator 4.2 or on UNIX Systems SAN Manager on UNIX Systems Upgrade Path Procedure(s) To upgrade from SANavigator 4.0, 4.1, or 4.1.1, complete the following procedures. 1. Upgrading from SANavigator 4.0, 4.1, or to EFCM 9.1 on UNIX Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on UNIX Systems on page 72 Note: If you have SANavigator 3.5 software, you must upgrade to SANavigator before you can upgrade to EFCM 9.7. To upgrade from SANavigator 4.2 or 4.2.1, complete the following procedures. 1. Upgrading from SANavigator 4.2 or to EFCM 9.6 on UNIX Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on UNIX Systems on page 72 To upgrade from SAN Manager 4.2.1, complete the following procedures. 1. Upgrading from SAN Manager 4.X to SANavigator on UNIX Systems on page Upgrading from SANavigator 4.2 or to EFCM 9.6 on UNIX Systems on page Upgrading from EFCM 9.X to EFCM 9.7 on UNIX Systems on page 72 12

13 Upgrading from EFCM 7.2 to EFCM 9.1 on Windows Systems Use the following procedures to upgrade from EFCM 7.2 software to EFCM 9.1 on a Windows management server. NOTE If you have EFCM 6.X, 7.0, or 7.1 software, you must upgrade to EFCM 7.2, then upgrade to EFCM 9.1, before you can upgrade to EFCM 9.7. Before Upgrading from 7.2 Before you upgrade EFCM, complete the following: Make sure that a version of EFCM is installed on your server that meets upgrade requirements. You may also need to upgrade E/OS versions on supported switches and directors. Make sure to obtain a new license key from the PFE Web site. Click Upgrade your Software on the main page and follow the steps to obtain a new license key. Make sure to copy phone numbers and other pertinent details from the Network and Dial-up Connections - CallHome.pbk dialog box Properties tab so that you can use them to configure the Advanced Call Home feature in the new release. Use Windows Explorer to navigate to the file <Install_Home>\CallHome\Config\McDATA-Domestic.pbk Make sure that you fully back up your current EFCM data on your management server. To do this, copy the D:\EfcData directory to the Zip disk (notebook server) or CD-RW drive (management server) where backups occur. Overwrite the existing files. Determine whether you are migrating data from another server, such as, from a notebook server to a 1U server. If so, refer to Migrating Data Between Windows Servers on page 62 and write down the IP address of the remote server. 13

14 Determine whether you are migrating EFCM data from a different machine. If so, you need to share the drive from the EFCM 7.2 machine and map it to the EFCM 9.1 machine. Refer to Migrating Data Between Windows Servers on page 62. Make sure that you leave the EFCM 7.2 software running; however, do not launch the EFCM 7.2 Client. Make sure that a user with username of Administrator, a password of password, and with system administrator privileges exists on the EFCM 7.2 machine. Installing EFCM 9.1 Use this procedure for installing EFCM 9.1 on a remote server. NOTE Virus protection software can interfere with installation. Make sure you disable any virus protection software such as Norton or McAfee before installation of server and/or clients. Instructions should be located in the manual for your particular virus protection software. 1. Insert the installation CD into the CD-ROM drive. If autorun is enabled, the installer will begin automatically. If autorun is not enabled, open the following file: <CD drive>\efcm91_win\install.exe The InstallAnywhere wizard will take you through the installation process. 2. On the Introduction screen, click Next. 3. On the Choose Install Set screen, select Server and Client or Client and click Next. NOTE: If you select Client, the installer will skip the steps that are not required. 4. On the Select Install Folder screen, select the usual location for your system s application files (for example, D:\Program Files) and click Next. NOTE: Do not select the installation folder for the previous version. NOTE: Do not install to the root directory (for example, C:\). 14

15 5. On the Pre-Installation Summary screen, review the your installation settings and click Install. 6. On the Installation Complete screen, make sure the Launch EFCM Configuration check box is selected (default), and click Done. The Configuration wizard displays the first time you launch the application. To continue with configuration go to Migrating EFCM 7.2 Data to EFCM 9.1 on page 15, step 2. Migrating EFCM 7.2 Data to EFCM 9.1 For information about what must be done before you start your upgrade, refer to Before Upgrading from 7.2 on page Start EFCM 9.1 from the Start menu or the desktop icon. The Configuration wizard displays the first time you launch the application. 2. On the Welcome screen, click Next. 3. On the License Agreement screen, read the agreement, select Yes and click Next. 4. On the Copy Data and Settings screen, browse to the install path of the previous version (for example, D:\Program Files\EFCM) and click Next. For information about the shared drive, refer to Migrating Data Between Windows Servers on page 62. NOTE: IP Addresses of unavailable switches and directors will not be fully migrated. 5. On the Copy Data and Settings (continued) screen, complete the following: a. In the EFCM 7.2 Data Directory field, enter or browse to the path of the previous version (for example, D:\EfcData). b. In the IP Address or Hostname field, enter the IP address or Hostname (default is Server IP Address) where 7.2 is running. c. In the System Administrator User ID field, type the user ID (must have Administrator privileges). 15

16 d. In the Password field, type the password associated with the Administrator user. e. Click Next. 6. On the EFCM 9.1 Server License screen, enter the license key (from the PFE website) and click Next. The License Key field is not case-sensitive. 7. On the EFCM 9.1 Server License Summary screen, verify the installation data, then click Finish. 8. On the start the server message, click OK. A progress message displays. When migration is complete, the EFCM 9.1 Log In dialog box displays. 9. Stop EFCM 7.2 services (Start > Programs > EFCM 7.2 > Stop Services). 10. On the EFCM 9.1 Log In dialog box, enter your login information and click Login. 11. After you confirm that the EFCM 9.1 install is working properly, uninstall EFCM 7.2. NOTE: Only one EFCM server can be running at a time; therefore, close and stop service of older versions of EFCM to prevent the older server version from starting and competing for switches managed by EFCM 9.1. a. Select Start > Programs > EFCM 7.2 > Uninstall EFCM. b. On the Uninstall Option screen, select one of the following options: Partial Uninstall Configuration and performance data is retained to be re-used by the new installation. Full Uninstall All data is removed. c. Click Uninstall. d. On the Uninstall Complete screen, click Done. 12. To upgrade from EFCM 9.1 to EFCM 9.7, go to Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems on page

17 Upgrading from EFCM 8.0 through to EFCM 9.1 on Windows Systems Use the following steps to upgrade EFCM 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.5, 8.6, or 8.6.1, to EFCM 9.1 on a rack-mount Management Server. Before Upgrading from 8.X Make sure to fully back up your EFCM data on your current management servers. Copy the following directories to your configured backup drive, where <Install_Home> is the directory where the application is installed: <Install_Home>\Client <Install_Home>\Server <Install_Home>\Backup <Install_Home>\Call Home Make sure to obtain a new license key from the PFE Web site. Click Upgrade your Software on the main page and follow the steps to obtain a new license key. Determine whether you are migrating data to another server, such as, from a notebook server to a 1U server. If so, refer to Migrating Data Between Windows Servers on page 62. Make sure to close all instances of the application before upgrading. Shut down EFCM on the management server, as well as on all remote workstations. Make sure to stop all EFCM Services for previous versions by completing the following steps: a. Select Start > Programs > EFCM 8.X > Stop Services. b. Press any key to close the window. 17

18 Installing EFCM Insert the installation CD into the CD-ROM drive. If autorun is enabled, the installer will begin automatically. If autorun is not enabled, open the following file: <CD drive>\efcm91_win\install.exe The InstallAnywhere wizard will take you through the installation process. 2. On the Introduction screen, click Next. 3. On the Choose Install Set screen, select Server and Client or Client and click Next. NOTE: If you select Client, the installer will skip the steps that are not required. 4. On the Select Install Folder screen, select the usual location for your system s application files (for example, D:\Program Files) and click Next. NOTE: Do not select the installation folder for the previous version. NOTE: Do not install to the root directory (for example, C:\). 5. On the Pre-Installation Summary screen, review the your installation settings and click Install. 6. On the Installation Complete screen, make sure the Launch EFCM Configuration check box is selected (default), and click Done. The Configuration wizard displays the first time you launch the application. To continue with configuration go to Migrating EFCM 8.X Data to EFCM 9.1 on page

19 Migrating EFCM 8.X Data to EFCM 9.1 NOTE When you upgrade from EFCM 8.X, the installation and configuration data is preserved on your system. If you choose to revert back to EFCM 8.X, you must change the installation directory or you will lose your installation and configuration data. 1. Start EFCM 9.1 from the Start menu or the desktop icon. The Configuration wizard will display the first time you launch the application. 2. On the Welcome screen, click Next. 3. On the License Agreement screen, read the agreement, select Yes and click Next. 4. On the Copy Data and Settings screen, browse to the install path of the previous version (for example, D:\Program Files\EFCM 8.X) and click Next. If you are migrating EFCM 8.X data from a different machine, then you need to share the drive from the EFCM 8.X machine and map it to the EFCM 9.1 machine. Refer to Migrating Data Between Windows Servers on page On the EFCM 9.1 Server License screen, enter the license key (from the PFE website) and click Next. The License Key field is not case-sensitive. 6. On the EFCM 9.1 Server License Summary screen, verify the installation data, then click Finish. A message displays that user settings are being applied and to please wait. For migrations from environments with large amounts of data, this may take some time. When migration is complete, the EFCM 9.1 Log In dialog box displays. 19

20 7. On the EFCM 9.1 Log In dialog box, enter your user ID and password and click Login. 8. After you confirm that the EFCM 9.1 install is working properly, uninstall EFCM 8.X. NOTE: Only one EFCM server can be running at a time; therefore, close and stop service of older versions of EFCM to prevent the older server version from starting and competing for switches managed by EFCM 9.1. a. Select Start > Programs > EFCM 8.X > Uninstall EFCM. b. On the Uninstall Option screen, select one of the following options: Partial Uninstall Configuration and performance data is retained to be re-used by the new installation. Full Uninstall All data is removed. c. Click Uninstall. d. On the Uninstall Complete screen, click Done. 9. To upgrade from EFCM 9.1 to EFCM 9.7, go to Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems on page

21 Upgrading from EFCM 8.7 through to EFCM 9.7 on Windows Systems Use the following steps to upgrade EFCM 8.7, , 8.9, or to EFCM 9.7 on a rack-mount Management Server. Before Upgrading from 8.7, 8.7.1, 8.8, 8.9, or Make sure to fully back up your EFCM data on your current management servers. Copy the following directories to your configured backup drive, where <Install_Home> is the directory where the application is installed: <Install_Home>\Client <Install_Home>\Server <Install_Home>\Backup <Install_Home>\Call Home Make sure to obtain a new license key from the PFE Web site. Click Upgrade your Software on the main page and follow the steps to obtain a new license key. Determine whether you are migrating data to another server, such as, from a notebook server to a 1U server. If so, refer to Migrating Data Between Windows Servers on page 62. Make sure to close all instances of the application before upgrading. Shut down EFCM on the management server, as well as on all remote workstations. Make sure to stop all EFCM Services for previous versions by completing the following steps: a. Select Start > Programs > EFCM 8.X > Stop Services. b. Press any key to close the window. 21

22 Installing EFCM Insert the installation CD into the CD-ROM drive. If autorun is enabled, the installer will begin automatically. If autorun is not enabled, open the following file: <CD drive>\efcm97_win\install.exe The InstallAnywhere wizard will take you through the installation process. 2. On the Introduction screen, click Next. 3. On the Choose Install Set screen, select Server and Client or Client and click Next. NOTE: If you select Client, the installer will skip the steps that are not required. 4. On the Select Install Folder screen, select the usual location for your system s application files (for example, D:\Program Files) and click Next. NOTE: Do not select the installation folder for the previous version. NOTE: Do not install to the root directory (for example, C:\). 5. On the Pre-Installation Summary screen, review the your installation settings and click Install. 6. On the Installation Complete screen, make sure the Launch EFCM Configuration check box is selected (default), and click Done. The Configuration wizard displays the first time you launch the application. To continue with configuration go to Migrating EFCM 8.7, 8.7.1, 8.8, 8.9, or Data to EFCM 9.7 on page

23 Migrating EFCM 8.7, 8.7.1, 8.8, 8.9, or Data to EFCM 9.7 NOTE When you upgrade from EFCM 8.X, the installation and configuration data is preserved on your system. If you choose to revert back to EFCM 8.X, you must change the installation directory or you will lose your installation and configuration data. 1. Start EFCM 9.7 from the Start menu or the desktop icon. The configuration wizard will display the first time you launch the application. 2. On the Welcome screen, click Next. 3. On the License Agreement screen, read the agreement, select Yes and click Next. 4. On the Copy Data and Settings screen, browse to the install path of the previous version (for example, D:\Program Files\EFCM 8.X) and click Next. If you are migrating EFCM 8.X data from a different machine, then you need to share the drive from the EFCM 8.X machine and map it to the EFCM 9.7 machine. Refer to Migrating Data Between Windows Servers on page On the EFCM 9.7 Server License screen, enter the license key (from the PFE website) and click Next. The License Key field is not case-sensitive. 6. On the EFCM 9.7 Server License Summary screen, verify the installation data, then click Finish. A message displays that user settings are being applied and to please wait. For migrations from environments with large amounts of data, this may take some time. When migration is complete, the EFCM 9.7 Log In dialog box displays. 23

24 7. On the EFCM 9.7 Log In dialog box, enter your user ID and password and click Login. 8. After you confirm that the EFCM 9.7 install is working properly, uninstall EFCM 8.X. NOTE: Only one EFCM server can be running at a time; therefore, close and stop service of older versions of EFCM to prevent the older server version from starting and competing for switches managed by EFCM 9.7. a. Select Start > Programs > EFCM 8.X > Uninstall EFCM. b. On the Uninstall Option screen, select one of the following options: Partial Uninstall Configuration and performance data is retained to be re-used by the new installation. Full Uninstall All data is removed. c. Click Uninstall. d. On the Uninstall Complete screen, click Done. 24

25 Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems Use the following steps to upgrade EFCM 9.X to EFCM 9.7 on a rack-mount Management Server. Before Upgrading from 9.X Make sure to fully back up your EFCM data on your current management servers. Copy the following directories to your configured backup drive, where <Install_Home> is the directory where the application is installed: <Install_Home>\Client <Install_Home>\Server <Install_Home>\Backup <Install_Home>\Call Home Determine whether you are migrating data to another server, such as, from a notebook server to a 1U server. If so, refer to Migrating Data Between Windows Servers on page 62. Make sure to close all instances of the application before upgrading. Shut down EFCM on the management server, as well as on all remote workstations. Make sure to stop all EFCM Services for previous versions by completing the following steps: a. Select Start > Programs > EFCM 9.X > Stop Services. b. Press any key to close the window. 25

26 Installing EFCM Insert the installation CD into the CD-ROM drive. If autorun is enabled, the installer will begin automatically. If autorun is not enabled, open the following file: <CD drive>\efcm97_win\install.exe The InstallAnywhere wizard will take you through the installation process. 2. On the Introduction screen, click Next. 3. On the Choose Install Set screen, select Server and Client or Client and click Next. NOTE: If you select Client, the installer will skip the steps that are not required. 4. On the Select Install Folder screen, select the usual location for your system s application files (for example, D:\Program Files) and click Next. NOTE: Do not select the installation folder for the previous version. NOTE: Do not install to the root directory (for example, C:\). 5. On the Pre-Installation Summary screen, review the your installation settings and click Install. 6. On the Installation Complete screen, make sure the Launch EFCM Configuration check box is selected (default), and click Done. The configuration wizard displays the first time you launch the application. To continue with configuration go to Migrating EFCM 9.X Data to EFCM 9.7 on page

27 Migrating EFCM 9.X Data to EFCM Start EFCM 9.7 from the Start menu or the desktop icon. The configuration wizard will display the first time you launch the application. 2. On the Welcome screen, click Next. 3. On the License Agreement screen, read the agreement, select Yes and click Next. 4. On the Copy Data and Settings screen, browse to the install path of the previous version (for example, D:\Program Files\EFCM 9.X) and click Next. If you are migrating EFCM 9.X data from a different machine, then you need to share the drive from the EFCM 9.X machine and map it to the EFCM 9.7 machine. Refer to Migrating Data Between Windows Servers on page On the EFCM 9.7 Server License screen, enter the new license key and serial number (from the PFE website), if necessary, and click Next. NOTE: When upgrading from 9.X or later, the License Key and Serial Number fields contain the values from the source version. The License Key field is not case-sensitive. 6. On the EFCM 9.7 Server License Summary screen, verify the installation data, then click Finish. A message displays that user settings are being applied and to please wait. For migrations from environments with large amounts of data, this may take some time. When migration is complete, the EFCM 9.7 Log In dialog box displays. 27

28 7. On the EFCM 9.7 Log In dialog box, enter your user ID and password and click Login. 8. After you confirm that the EFCM 9.7 install is working properly, uninstall EFCM 9.X. NOTE: Only one EFCM server can be running at a time; therefore, close and stop service of older versions of EFCM to prevent the older server version from starting and competing for switches managed by EFCM 9.7. a. Select Start > Programs > EFCM 9.X > Uninstall EFCM. b. On the Uninstall Option screen, select one of the following options: Partial Uninstall Configuration and performance data is retained to be re-used by the new installation. Full Uninstall All data is removed. c. Click Uninstall. d. On the Uninstall Complete screen, click Done. 28

29 Upgrading from Connectrix Manager 9.7 to EFCM 9.7 on Windows Systems Use the following steps to upgrade Connectrix Manager 9.7 to EFCM 9.7 on a rack-mount Management Server. Before Upgrading from Connectrix Manager 9.7 Make sure to fully back up your Connectrix Manager data on your current management servers. Copy the following directories to your configured backup drive, where <Install_Home> is the directory where the application is installed: <Install_Home>\Client <Install_Home>\Server <Install_Home>\Backup <Install_Home>\Call Home Make sure to obtain a new license key from the PFE Web site. Click Upgrade your Software on the main page and follow the steps to obtain a new license key. NOTE: When upgrading from 9.X or later, the License Key and Serial Number fields contain the values from the source version. Determine whether you are migrating data to another server, such as, from a notebook server to a 1U server. If so, refer to Migrating Data Between Windows Servers on page 62. Make sure to close all instances of the application before upgrading. Shut down Connectrix Manager on the management server, as well as on all remote workstations. Make sure to stop all Connectrix Manager Services for previous versions by completing the following steps: a. Select Start > Programs > Connectrix Manager 9.7 > Stop Services. b. Press any key to close the window. c. Select Start > Settings > Control Panel > Administrative Tools > Services. d. Right-click Connectrix Manager FTP Server and select Stop. 29

30 Installing EFCM Insert the installation CD into the CD-ROM drive. If autorun is enabled, the installer will begin automatically. If autorun is not enabled, open the following file: <CD drive>\efcm97_win\install.exe The InstallAnywhere wizard will take you through the installation process. 2. On the Introduction screen, click Next. 3. On the Choose Install Set screen, select Server and Client or Client and click Next. NOTE: If you select Client, the installer will skip the steps that are not required. 4. On the Select Install Folder screen, select the usual location for your system s application files (for example, D:\Program Files) and click Next. NOTE: Do not select the installation folder for the previous version. NOTE: Do not install to the root directory (for example, C:\). 5. On the Pre-Installation Summary screen, review the your installation settings and click Install. 6. On the Installation Complete screen, make sure the Launch EFCM Configuration check box is selected (default), and click Done. The configuration wizard displays the first time you launch the application. To continue with configuration go to Migrating Connectrix Manager 9.7 Data to EFCM 9.7 on page

31 Migrating Connectrix Manager 9.7 Data to EFCM Start EFCM 9.7 from the Start menu or the desktop icon. The configuration wizard will display the first time you launch the application. 2. On the Welcome screen, click Next. 3. On the License Agreement screen, read the agreement, select Yes and click Next. 4. On the Copy Data and Settings screen, browse to the install path of the previous version (for example, D:\Program Files\EFCM 9.7) and click Next. If you are migrating Connectrix Manager 9.7 data from a different machine, then you need to share the drive from the Connectrix Manager 9.7 machine and map it to the EFCM 9.7 machine. Refer to Migrating Data Between Windows Servers on page On the EFCM 9.7 Server License screen, enter the new license key and serial number (from the PFE website), if necessary, and click Next. NOTE: When upgrading from 9.X or later, the License Key and Serial Number fields contain the values from the source version. The License Key field is not case-sensitive. 6. On the EFCM 9.7 Server License Summary screen, verify the installation data, then click Finish. A message displays that user settings are being applied and to please wait. For migrations from environments with large amounts of data, this may take some time. When migration is complete, the EFCM 9.7 Log In dialog box displays. 31

32 7. On the EFCM 9.7 Log In dialog box, enter your user ID and password and click Login. 8. After you confirm that the EFCM 9.7 install is working properly, uninstall Connectrix Manager 9.7. NOTE: Only one EFCM or Connectrix Manager server can be running at a time; therefore, close and stop service of older versions of Connectrix Manager to prevent the older server version from starting and competing for switches managed by EFCM 9.7. a. Select Start > Programs > Connectrix Manager 9.7 > Uninstall Connectrix Manager. If any related services (such as Client.exe or ClientD.exe) are still running, the following Warning message displays: Uninstall will stop all the EFCM services and shut down the application if it is running. Do you want to proceed?. Click Yes to close all services and continue uninstall. b. On the Uninstall Option screen, select one of the following options: Partial Uninstall Configuration and performance data is retained to be re-used by the new installation. Full Uninstall All data is removed. c. Click Uninstall. d. On the Uninstall Complete screen, click Done. 32

33 Upgrading from EFCM 9.7 to Connectrix Manager 9.7 on Windows Systems Use the following steps to upgrade EFCM 9.7 to Connectrix Manager 9.7 on a rack-mount Management Server. Before Upgrading from EFCM 9.7 Make sure to fully back up your EFCM data on your current management servers. Copy the following directories to your configured backup drive, where <Install_Home> is the directory where the application is installed: <Install_Home>\Client <Install_Home>\Server <Install_Home>\Backup <Install_Home>\Call Home Make sure to obtain a new license key from the PFE Web site. Click Upgrade your Software on the main page and follow the steps to obtain a new license key. NOTE: When upgrading from 9.X or later, the License Key and Serial Number fields contain the values from the source version. Determine whether you are migrating data to another server, such as, from a notebook server to a 1U server. If so, refer to Migrating Data Between Windows Servers on page 62. Make sure to close all instances of the application before upgrading. Shut down EFCM on the management server, as well as on all remote workstations. Make sure to stop all EFCM Services for previous versions by completing the following steps: a. Select Start > Programs > EFCM 9.7 > Stop Services. b. Press any key to close the window. c. Select Start > Settings > Control Panel > Administrative Tools > Services. d. Right-click EFCM FTP Server and select Stop. 33

34 Installing Connectrix Manager Insert the installation CD into the CD-ROM drive. If autorun is enabled, the installer will begin automatically. If autorun is not enabled, open the following file: <CD drive>\efcm97_win\install.exe The InstallAnywhere wizard will take you through the installation process. 2. On the Introduction screen, click Next. 3. On the Choose Install Set screen, select Server and Client or Client and click Next. NOTE: If you select Client, the installer will skip the steps that are not required. 4. On the Select Install Folder screen, select the usual location for your system s application files (for example, D:\Program Files) and click Next. NOTE: Do not select the installation folder for the previous version. NOTE: Do not install to the root directory (for example, C:\). 5. On the Pre-Installation Summary screen, review the your installation settings and click Install. 6. On the Installation Complete screen, make sure the Launch EFCM Configuration check box is selected (default), and click Done. The configuration wizard displays the first time you launch the application. To continue with configuration go to Migrating EFCM 9.7 Data to Connectrix Manager 9.7 on page

35 Migrating EFCM 9.7 Data to Connectrix Manager Start Connectrix Manager 9.7 from the Start menu or the desktop icon. The configuration wizard will display the first time you launch the application. 2. On the Welcome screen, click Next. 3. On the License Agreement screen, read the agreement, select Yes and click Next. 4. On the Copy Data and Settings screen, browse to the install path of the previous version (for example, D:\Program Files\EFCM 9.7) and click Next. If you are migrating EFCM 9.7 data from a different machine, then you need to share the drive from the EFCM 9.7 machine and map it to the Connectrix Manager 9.7 machine. Refer to Migrating Data Between Windows Servers on page On the Connectrix Manager 9.7 Server License screen, enter the new license key and serial number (from the PFE website), if necessary, and click Next. NOTE: When upgrading from 9.X or later, the License Key and Serial Number fields contain the values from the source version. The License Key field is not case-sensitive. 6. On the Connectrix Manager 9.7 Server License Summary screen, verify the installation data, then click Finish. A message displays that user settings are being applied and to please wait. For migrations from environments with large amounts of data, this may take some time. When migration is complete, the Connectrix Manager 9.7 Log In dialog box displays. 35

36 7. On the Connectrix Manager 9.7 Log In dialog box, enter your user ID and password and click Login. 8. After you confirm that the Connectrix Manager 9.7 install is working properly, uninstall EFCM 9.7. NOTE: Only one EFCM or Connectrix Manager server can be running at a time; therefore, close and stop service of older versions of EFCM to prevent the older server version from starting and competing for switches managed by Connectrix Manager 9.7. a. Select Start > Programs > Connectrix Manager 9.7 > Uninstall EFCM. If any related services (such as Client.exe or ClientD.exe) are still running, the following Warning message displays: Uninstall will stop all the EFCM services and shut down the application if it is running. Do you want to proceed?. Click Yes to close all services and continue uninstall. b. On the Uninstall Option screen, select one of the following options: Partial Uninstall Configuration and performance data is retained to be re-used by the new installation. Full Uninstall All data is removed. c. Click Uninstall. d. On the Uninstall Complete screen, click Done. 36

37 Upgrading from SANavigator 4.0, 4.1, or to EFCM 9.1 on Windows Systems Use the following steps to upgrade SANavigator 4.0, 4.1, to EFCM 9.1 on a rack-mount Management Server. NOTE If you are running SANavigator 3.5, you must upgrade to SANavigator before you upgrade to EFCM 9.7. Before Upgrading from 4.X Make sure to fully back up your SANavigator data on your current management servers. Copy the following directories to your configured backup drive, where <Install_Home> is the directory where the application is installed: <Install_Home>\Client <Install_Home>\Server <Install_Home>\Backup <Install_Home>\Call Home Make sure to obtain a new license key from the PFE Web site. Click Upgrade your Software on the main page and follow the steps to obtain a new license key. Determine whether you are migrating data to another server, such as, from a notebook server to a 1U server. If so, refer to Migrating Data Between Windows Servers on page 62. Make sure to close all instances of the application before upgrading. Shut down SANavigator on the management server, as well as on all remote workstations. 37

38 Determine whether you are migrating Remote Discovery Connector (RDC) data. Changes made to the deployment.properties and peers.properties files are not migrated. Make sure to copy the peers.properties file to the EFCM directory (<Install_Home>\resources\Server\), where <Install_Home> is the directory where the server discovering the RDC is installed. The deployment.properties file has changed to deployment.xml file; therefore, you must manually edit the XML files to meet your requirements. The deployment.xml file is located in the EFCM directory (<Install_Home>\resources\Server\), and you configure the XML file the same way you did the properties file, except for the XML format. The XML format includes comments which explain how to configure the file for different scenarios. For example: <!-- NOTE: This property is modified for peer deployment. There can be only one value-item element with target-id="default". Comment out the unused elements. --> <property> <name>com.smp.plugsnpeers.plugs.icontainer</name> <!-- This is the standard value-item for NON-PEER USE. --> <value-item target-id="default"> <value>com.smp.server.plugdiscovery.classicdiscoveryconta iner</value> </value-item> <!-- Comment out above and uncomment this value-item for discovery by ALL PEERS. <value-item target-id="default"> <value>com.smp.plugsnpeers.peers.rmi.peer</value> </value-item> --> <!-- Comment out above and uncomment this value-item for discovery by SERVER and ALL PEERS. <value-item target-id="default"> <value>com.smp.server.plugdiscovery.classicdiscoveryconta iner;com.smp.plugsnpeers.peers.rmi.peer</value> </value-item> --> Make sure to stop all SANavigator Services for previous versions by completing the following steps: a. Select Start > Programs > McDATA > SANavigator 4.X > Stop Services. b. Press any key to close the window. 38

39 Installing EFCM Insert the installation CD into the CD-ROM drive. If autorun is enabled, the installer will begin automatically. If autorun is not enabled, open the following file: <CD drive>\efcm91_win\install.exe The InstallAnywhere wizard will take you through the installation process. 2. On the Introduction screen, click Next. 3. On the Choose Install Set screen, select Server and Client or Client and click Next. NOTE: If you select Client, the installer will skip the steps that are not required. 4. On the Select Install Folder screen, select the usual location for your system s application files (for example, D:\Program Files) and click Next. NOTE: Do not select the installation folder for the previous version. NOTE: Do not install to the root directory (for example, C:\). 5. On the Pre-Installation Summary screen, review the your installation settings and click Install. 6. On the Installation Complete screen, make sure the Launch EFCM Configuration check box is selected (default), and click Done. The configuration wizard displays the first time you launch the application. To continue with configuration go to Migrating SANavigator 4.0, 4.1, or Data to EFCM 9.1 on page

40 Migrating SANavigator 4.0, 4.1, or Data to EFCM 9.1 NOTE Manual changes to the start up scripts are not migrated to the new version. You must make the changes manually. To migrate SANavigator 4.0, 4.1, or data to EFCM 9.1, complete the following: 1. Start EFCM 9.1 from the Start menu or the desktop icon. The configuration wizard will display the first time you launch the application. 2. On the Welcome screen, click Next. 3. On the License Agreement screen, read the agreement, select Yes and click Next. 4. On the Copy Data and Settings screen, browse to the install path of the previous version (for example, D:\Program Files\McDATA\SANavigator 4.X) and click Next. If you are migrating SANavigator 4.X data from a different machine, then you need to share the drive from the SANavigator 4.X machine and map it to the EFCM 9.1 machine. Refer to Migrating Data Between Windows Servers on page On the EFCM 9.1 Server License screen, enter the license key (from the PFE website) and click Next. The License Key field is not case-sensitive. 6. On the EFCM 9.1 Server License Summary screen, verify the installation data, then click Finish. A message displays that user settings are being applied and to please wait. For migrations from environments with large amounts of data, this may take some time. When migration is complete, the EFCM 9.1 Log In dialog box displays. 40

41 7. On the EFCM 9.1 Log In dialog box, enter your user ID and password and click Login. 8. After you confirm that the EFCM 9.1 install is working properly, uninstall SANavigator 4.X. NOTE: Only one EFCM or SANavigator server can be running at a time; therefore, close and stop services of all versions of SANavigator to prevent the older server version from starting and competing for switches managed by EFCM 9.1. a. Select Start > Programs > McDATA > SANavigator 4.X > Uninstall SANavigator. b. On the Uninstall Option screen, select one of the following options: Partial Uninstall Configuration and performance data is retained to be re-used by the new installation. Full Uninstall All data is removed. c. Click Uninstall. d. On the Uninstall Complete screen, click Done. 9. To upgrade from EFCM 9.1 to EFCM 9.7 go to Upgrading from EFCM 9.X to EFCM 9.7 on Windows Systems on page

Fabric OS Password Recovery Notes. Supporting Fabric OS v2.6.x, v3.1.x, v4.x, v5.x

Fabric OS Password Recovery Notes. Supporting Fabric OS v2.6.x, v3.1.x, v4.x, v5.x Fabric OS Password Recovery Notes Supporting Fabric OS v2.6.x, v3.1.x, v4.x, v5.x *53-1000114-01* Publication Date: 3/13/2006 Copyright 2006, Brocade Communications Systems, Incorporated. ALL RIGHTS RESERVED.

More information

Firmware Download. Best Practice Notes. Supporting Fabric OS v4.x and 5.x. Supporting SilkWorm 200E, 3250, 3850, 3900, 4100, 12000, 24000, and 48000

Firmware Download. Best Practice Notes. Supporting Fabric OS v4.x and 5.x. Supporting SilkWorm 200E, 3250, 3850, 3900, 4100, 12000, 24000, and 48000 Firmware Download Best Practice Notes Supporting Fabric OS v4.x and 5.x Supporting SilkWorm 200E, 3250, 3850, 3900, 4100, 12000, 24000, and 48000 *53-1000039-02* Publication Date: 11/16/2007 Copyright

More information

Brocade VDX Four-Post Flush and Recessed Mount Rack Kit

Brocade VDX Four-Post Flush and Recessed Mount Rack Kit 53-1002667-01 22 August 2012 Brocade VDX 8770-8 Four-Post Flush and Recessed Mount Rack Kit Installation Procedure Supporting the Brocade VDX 8770-8 switch 53-1002667-01 *53-1002667-01* Copyright 2012

More information

Fixed Rack Mount Kit

Fixed Rack Mount Kit 30 September 2011 Fixed Rack Mount Kit Installation Supporting Brocade 200E, 300, 4100, 4900, 5000, 5100, 5300, 7500 series, 7600, 7800, 8000, AP7420, Encryption Switch, VA-40FC, VDX 6710-54, VDX 6720-24,

More information

PRIMERGY BX900 Blade Server Systems Fibre Channel Connection Blade BR5450

PRIMERGY BX900 Blade Server Systems Fibre Channel Connection Blade BR5450 QuickStart Guide PRIMERGY BX900 Blade Server Systems Fibre Channel Connection Blade BR5450 English Brocade 5450 Embedded Switch Module QuickStart Guide For Fujitsu PRIMERGY BX900 Blade Server Series 53-1001265-02

More information

SilkWorm QuickStart Guide. Supporting Fabric OS v5.0.4 * * Publication Number:

SilkWorm QuickStart Guide. Supporting Fabric OS v5.0.4 * * Publication Number: SilkWorm 4016 QuickStart Guide Supporting Fabric OS v5.0.4 Publication Number: *53-100051-01* Publication Date: 1/30/2006 Copyright 2005, Brocade Communications Systems, Incorporated. ALL RIGHTS RESERVED.

More information

Secure Fabric OS. QuickStart Guide. Supporting Fabric OS v3.2.0, v Supporting SilkWorm 3016, 3200, 3250, 3800, 3850, 3900, 4100, 12000, 24000

Secure Fabric OS. QuickStart Guide. Supporting Fabric OS v3.2.0, v Supporting SilkWorm 3016, 3200, 3250, 3800, 3850, 3900, 4100, 12000, 24000 Secure Fabric OS QuickStart Guide Supporting Fabric OS v3.2.0, v4.4.0 Supporting SilkWorm 3016, 3200, 3250, 3800, 3850, 3900, 4100, 12000, 24000 53-0000352-04 Publication Date: 09/03/04 Copyright 2003-2004

More information

SilkWorm 4100 Fan Assembly

SilkWorm 4100 Fan Assembly Replacement Procedure Supporting Fabric OS v4.4.0 Supporting *53-0000571-01* Publication Date: 07/28/04 Copyright 2004, Brocade Communications Systems, Incorporated. ALL RIGHTS RESERVED. Brocade, the Brocade

More information

3M Molecular Detection System Software Upgrade/Installation Instructions

3M Molecular Detection System Software Upgrade/Installation Instructions User Manual Supplement Number: TB.342837.03 Effective Date: March 2018 Supersedes: TB.342837.02 Technology Platform: 3M Molecular Detection System Originating Location: St. Paul, MN 3M Molecular Detection

More information

Installing Lotus Notes on Your Computer Lotus Notes release (Standard and Basic versions)

Installing Lotus Notes on Your Computer Lotus Notes release (Standard and Basic versions) Installing Lotus Notes on Your Computer Lotus Notes release 8.0.1 (Standard and Basic versions) You can install Lotus Notes on your PC just as you would install any other software. You may download the

More information

Network Management Utility

Network Management Utility 4343-7705-02 Network Management Utility Foreword Welcome Network Management Utility is utility software that provides central control over printers, copiers, and other devices on a network. With Network

More information

DIGIOP ELEMENTS V8.7 NVR Software-only Installation Guide

DIGIOP ELEMENTS V8.7 NVR Software-only Installation Guide DIGIOP ELEMENTS V8.7 NVR Software-only Installation Guide About this installation guide Use this document as a guide to install your DIGIOP ELEMENTS NVR software system. It includes procedures to install

More information

AlliedView -EMS 4.0 INSTALLATION GUIDE

AlliedView -EMS 4.0 INSTALLATION GUIDE AlliedView -EMS 4.0 INSTALLATION GUIDE AlliedView -EMS 4.0 INSTALLATION GUIDE Page 1 of 29 TABLE OF CONTENTS 1 INTRODUCTION...3 2 SYSTEM REQUIREMENTS...3 2.1 WINDOWS... 3 2.2 SOLARIS... 3 2.3 HP-UX...

More information

HP StorageWorks Performance Advisor. Installation Guide. Version 1.7A

HP StorageWorks Performance Advisor. Installation Guide. Version 1.7A HP StorageWorks Performance Advisor Installation Guide Version 1.7A notice Copyright 2002-2004 Hewlett-Packard Development Company, L.P. Edition 0402 Part Number B9369-96068 Hewlett-Packard Company makes

More information

Upgrading the Cisco ONS CL to Release 7.0

Upgrading the Cisco ONS CL to Release 7.0 This document explains how to upgrade Cisco ONS 15310-CL Cisco Transport Controller (CTC) software from Release 5.x or Release 6.x to Release 7.0.x, or from Release 7.0.x to a later maintenance release

More information

OpenManage Integration for VMware vcenter Using the vsphere Client Quick Install Guide Version 2.0

OpenManage Integration for VMware vcenter Using the vsphere Client Quick Install Guide Version 2.0 OpenManage Integration for VMware vcenter Using the vsphere Client Quick Install Guide Version 2.0 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better

More information

NetXplorer. Installation Guide. Centralized NetEnforcer Management Software P/N D R3

NetXplorer. Installation Guide. Centralized NetEnforcer Management Software P/N D R3 NetXplorer Centralized NetEnforcer Management Software Installation Guide P/N D357006 R3 Important Notice Important Notice Allot Communications Ltd. ("Allot") is not a party to the purchase agreement

More information

Installation Manual for Sonnet RAID Controller

Installation Manual for Sonnet RAID Controller Installation Manual for Sonnet RAID Controller System Requirements - Mac Users The Sonnet RAID controller requires the following in order to operate in your system: One available PCI Express (PCIe) 1.1

More information

DIGIOP ELEMENTS V8.1 Software-only Installation Guide

DIGIOP ELEMENTS V8.1 Software-only Installation Guide DIGIOP ELEMENTS V8.1 Software-only Installation Guide About this installation guide Use this document as a guide to install your DIGIOP ELEMENTS software system. It includes procedures to install your

More information

SOFTWARE INSTALLATION GUIDE. EZSwitchSetup Software Installation Guide for Brocade G620

SOFTWARE INSTALLATION GUIDE. EZSwitchSetup Software Installation Guide for Brocade G620 SOFTWARE INSTALLATION GUIDE EZSwitchSetup Software Installation Guide for Brocade G620 53-1003974-02 30 May 2016 2016, Brocade Communications Systems, Inc. All Rights Reserved. Brocade, Brocade Assurance,

More information

EMS Installation. Workstation Requirements CHAPTER. EMS Lite (Windows 95/98) EMS NT (Windows NT 4.0)

EMS Installation. Workstation Requirements CHAPTER. EMS Lite (Windows 95/98) EMS NT (Windows NT 4.0) CHAPTER 2 EMS Installation This chapter provides instructions for installing the Element Management System (EMS) software on a user workstation. Workstation Requirements The following sections list the

More information

MapMarker Plus Developer Installation Guide

MapMarker Plus Developer Installation Guide MapMarker Plus 11.1 Developer Installation Guide Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor or its representatives. No

More information

Mercury WinRunner. Installation Guide Version 9.2. Document Release Date: February 26, 2007

Mercury WinRunner. Installation Guide Version 9.2. Document Release Date: February 26, 2007 Mercury WinRunner Installation Guide Version 9.2 Document Release Date: February 26, 2007 Mercury WinRunner Installation Guide, Version 9.2 This document, and the accompanying software and other documentation,

More information

Novell ZENworks Asset Management 7

Novell ZENworks Asset Management 7 Novell ZENworks Asset Management 7 w w w. n o v e l l. c o m July 2006 INSTALLATION GUIDE Table Of Contents 1. Installation Overview... 1 Upgrade/Update Matrix...1 Installation Choices...2 ZENworks Asset

More information

Brocade SMI Agent. Installation Guide. Supporting SMI Agent v Publication Number: Publication Date: 11/30/06

Brocade SMI Agent. Installation Guide. Supporting SMI Agent v Publication Number: Publication Date: 11/30/06 Brocade SMI Agent Installation Guide Supporting SMI Agent v110.5.0 Publication Date: 11/30/06 Copyright 2006, Brocade Communications Systems, Incorporated. ALL RIGHTS RESERVED. Brocade, the Brocade B weave

More information

Rational Performance Tester, Version 7.0

Rational Performance Tester, Version 7.0 Rational Performance Tester, Version 7.0 Installation Guide GI11-6754-00 Rational Performance Tester, Version 7.0 Installation Guide GI11-6754-00 Note Before using this information and the product it

More information

XLmanage Version 2.4. Installation Guide. ClearCube Technology, Inc.

XLmanage Version 2.4. Installation Guide. ClearCube Technology, Inc. XLmanage Version 2.4 Installation Guide ClearCube Technology, Inc. www.clearcube.com Copyright and Trademark Notices Copyright 2009 ClearCube Technology, Inc. All Rights Reserved. Information in this document

More information

Wireless LAN. SmartPass Quick Start Guide. Release 9.0. Published: Copyright 2013, Juniper Networks, Inc.

Wireless LAN. SmartPass Quick Start Guide. Release 9.0. Published: Copyright 2013, Juniper Networks, Inc. Wireless LAN SmartPass Quick Start Guide Release 9.0 Published: 2013-07-14 Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 USA 408-745-2000 www.juniper.net All rights reserved.

More information

Nortel Media Application Server 5.1. Installation NN

Nortel Media Application Server 5.1. Installation NN NN44450-300 Document status: Standard Document issue: 01.03 Document date: 15 October 2008 Product release: Release 5.1 Job function: and Commissioning Type: Technical document Language type: English All

More information

Dell Server Management Pack Suite Version For Microsoft System Center Operations Manager And System Center Essentials Installation Guide

Dell Server Management Pack Suite Version For Microsoft System Center Operations Manager And System Center Essentials Installation Guide Dell Server Management Pack Suite Version 5.0.1 For Microsoft System Center Operations Manager And System Center Essentials Installation Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important

More information

Installing and Setting Up the Snap-on EPC. Rev.1.6 (12 Apr 2012) PN EN

Installing and Setting Up the Snap-on EPC. Rev.1.6 (12 Apr 2012) PN EN Installing and Setting Up the Snap-on EPC Rev.1.6 (12 Apr 2012) PN 275-0800-EN Table of Contents 1. Introduction... 3 2. Minimum Requirements... 4 3. Installing the Snap-on EPC... 6 4. Licensing the Snap-on

More information

KYOCERA Net Admin Installation Guide

KYOCERA Net Admin Installation Guide KYOCERA Net Admin Guide Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for

More information

Announcing IQLink v3.9.6

Announcing IQLink v3.9.6 IQLink ATC Controller Configuration Utility Announcing IQLink v3.9.6 Quixote Traffic is pleased to announce the release of Version 3.9.6 of the IQLink Utility Software. IQLink is used to configure Quixote

More information

Cover. MATWorX Installation Guide NWA ISSUE 2.1

Cover. MATWorX Installation Guide NWA ISSUE 2.1 Cover MATWorX Installation Guide NWA-008862-001 ISSUE 2.1 LIABILITY DISCLAIMER NEC Corporation reserves the right to change the specifications, functions, or features, at any time, without notice. NEC

More information

AnySite. Australia. Install Guide. AnySite v9.1 Install Guide

AnySite. Australia. Install Guide. AnySite v9.1 Install Guide AnySite Australia Install Guide AnySite v9.1 Install Guide TABLE OF CONTENTS Chapter 1: Introduction... 4 Product Inventory Chapter 2: Before You Begin... 6 Permissions System Requirements Default Install

More information

Upgrade Guide. BCM Business Communications Manager

Upgrade Guide. BCM Business Communications Manager Upgrade Guide BCM50 2.0 Business Communications Manager Document Status: Standard Document Number: NN40020-401 Document Version: 01.01 Part Code: N0107119 Date: October 2006 Copyright 2006 Nortel Networks,

More information

Avigilon Control Center Virtual Matrix User Guide

Avigilon Control Center Virtual Matrix User Guide Avigilon Control Center Virtual Matrix User Guide Version 5.0.2 PDF-ACCVM-A-Rev2 Copyright 2013 Avigilon. All rights reserved. The information presented is subject to change without notice. No copying,

More information

Installing the Management Software

Installing the Management Software To install the software for the first time, or if you want to update or reinstall the software, access the supervisor module with a web browser. Click the Install links on the web page that is displayed.

More information

DPoE Element Manager. Release Notes

DPoE Element Manager. Release Notes DPoE Element Manager Release Notes Copyright 2008 PANDUIT Corp. All rights reserved. No part of this book shall be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical,

More information

Installing Enterprise Switch Manager

Installing Enterprise Switch Manager Installing Enterprise Switch Manager NN47300-300 Document status: Standard Document version: 0401 Document date: 26 March 2008 All Rights Reserved The information in this document is subject to change

More information

Parallels Software International, Inc. Parallels Compressor. Installation Guide. Server

Parallels Software International, Inc. Parallels Compressor. Installation Guide. Server Parallels Software International, Inc. Parallels Compressor Installation Guide Server (c) 2005-2007 Copyright 2006-2007 by Parallels Software International Inc. All rights reserved. Parallels, Parallels

More information

1.0. Quest Enterprise Reporter Discovery Manager USER GUIDE

1.0. Quest Enterprise Reporter Discovery Manager USER GUIDE 1.0 Quest Enterprise Reporter Discovery Manager USER GUIDE 2012 Quest Software. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright. The software described in this guide

More information

DRAWings 8 and Wings modular 8 Embroidery Software INSTALLATION GUIDE

DRAWings 8 and Wings modular 8 Embroidery Software INSTALLATION GUIDE DRAWings 8 and Wings modular 8 Embroidery Software INSTALLATION GUIDE We thank you for purchasing DRAWings 6 and Wings modular 5 software. We are committed to providing you with the most innovative technology.

More information

Dell EMC Repository Manager Version 3.1. Quick Start Guide

Dell EMC Repository Manager Version 3.1. Quick Start Guide Dell EMC Repository Manager Version 3.1 Quick Start Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates

More information

Ocularis. Installation & Licensing Guide

Ocularis. Installation & Licensing Guide Ocularis Installation & Licensing Guide On-Net Surveillance Systems, Inc. One Blue Hill Plaza, 7 th Floor, PO Box 1555 Pearl River, NY 10965 Phone: (845) 732-7900 Fax: (845) 732-7999 Web: www.onssi.com

More information

T E KLYNX BACKTRACK V E R S I O N 6 I N S T A L L A T I O N G U I D E

T E KLYNX BACKTRACK V E R S I O N 6 I N S T A L L A T I O N G U I D E BACKTRACK 6 T E K LY NX VERSION I N S T A L L A T I O N G U I D E Note Installation Guide The information in this manual is not binding and may be modified without prior notice. Supply of the software

More information

AMS 360 In-House and Transfer Manager.NET

AMS 360 In-House and Transfer Manager.NET AMS 360 In-House and Transfer Manager.NET 07/07 Standard Disclaimer The staff of AMS Services has taken due care in preparing these instructions; however, nothing herein modifies or alters in any way the

More information

Release Date March 10, Adeptia Inc. 443 North Clark Ave, Suite 350 Chicago, IL 60610, USA Phone: (312)

Release Date March 10, Adeptia Inc. 443 North Clark Ave, Suite 350 Chicago, IL 60610, USA Phone: (312) Adeptia Server 4.9 Installation Guide Version 1.2 Release Date March 10, 2009 Adeptia Inc. 443 North Clark Ave, Suite 350 Chicago, IL 60610, USA Phone: (312) 229-1727 Copyright Copyright 2000-2008 Adeptia,

More information

MapMarker Plus Desktop Installation Guide

MapMarker Plus Desktop Installation Guide MapMarker Plus 11.0 Desktop Installation Guide Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor or its representatives. No

More information

for ColdFire Architectures V7.2 Quick Start

for ColdFire Architectures V7.2 Quick Start for ColdFire Architectures V7.2 Quick Start CodeWarrior Development Studio for ColdFire Architectures V7.2 Quick Start SYSTEM REQUIREMENTS Hardware Operating System Disk Space 1 GHz Pentium compatible

More information

LifeSize Gatekeeper Installation Guide

LifeSize Gatekeeper Installation Guide LifeSize Gatekeeper Installation Guide July 2008 Copyright Notice 2008 LifeSize Communications Inc, and its licensors. All rights reserved. LifeSize Communications has made every effort to ensure that

More information

Get Started. Document Management 9.7.1

Get Started. Document Management 9.7.1 Get Started Document Management 9.7.1 NOTICE This document and the Sage Timberline Office software may be used only in accordance with the accompanying Sage Timberline Office End User License Agreement.

More information

EPICenter Management Suite Installation and Upgrade Guide

EPICenter Management Suite Installation and Upgrade Guide EPICenter Management Suite Installation and Upgrade Guide Software Version 6.0 Extreme Networks, Inc. 3585 Monroe Street Santa Clara, California 95051 (888) 257-3000 (408) 579-2800 http://www.extremenetworks.com

More information

Scholastic Reading Inventory. Installation Guide

Scholastic Reading Inventory. Installation Guide Scholastic Reading Inventory Installation Guide For use with SRI v1.8.1 and SAM v1.8.1 Copyright 2009 by Scholastic Inc. All rights reserved. Published by Scholastic Inc. SCHOLASTIC, SYSTEM 44, SCHOLASTIC

More information

EA/Studio Installation Guide

EA/Studio Installation Guide EA/Studio 1.5.2 Installation Guide Copyright 1994-2008 Embarcadero Technologies, Inc. Embarcadero Technologies, Inc. 100 California Street, 12th Floor San Francisco, CA 94111 U.S.A. All rights reserved.

More information

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory Installation & Administration Guide Version

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory Installation & Administration Guide Version FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory Installation & Administration Guide Version 2011.1 2011 Sage Software, Inc. All rights reserved. Portions Copyrighted 1991-2001 by ianywhere

More information

Wired / Wireless IR IP Camera ICA-108 / ICA-108W. Quick Installation Guide

Wired / Wireless IR IP Camera ICA-108 / ICA-108W. Quick Installation Guide Wired / Wireless IR IP Camera ICA-108 / ICA-108W Quick Installation Guide Table of Contents Chapter 1. Introduction... 3 1.1 Before Installation... 3 1.2 System Requirements... 3 1.3 Package Content...

More information

Installing Enterprise Switch Manager

Installing Enterprise Switch Manager Installing Enterprise Switch Manager ATTENTION Clicking on a PDF hyperlink takes you to the appropriate page If necessary, scroll up or down the page to see the beginning of the referenced section NN47300-300

More information

Symantec pcanywhere 12.5 SP4 Release Notes

Symantec pcanywhere 12.5 SP4 Release Notes Symantec pcanywhere 12.5 SP4 Release Notes Symantec pcanywhere 12.5 SP4 Release Notes The software described in this book is furnished under a license agreement and may be used only in accordance with

More information

Getting Started with Vision 6. Version 6.8

Getting Started with Vision 6. Version 6.8 Getting Started with Vision 6 Version 6.8 Notice Copyright 2008, GenevaLogic, Inc. All rights reserved. Document Date: September 8, 2008 Document Version: 6.8 The content in this document represents the

More information

Cisco UCS C-Series IMC Emulator Quick Start Guide. Cisco IMC Emulator 2 Overview 2 Setting up Cisco IMC Emulator 3 Using Cisco IMC Emulator 9

Cisco UCS C-Series IMC Emulator Quick Start Guide. Cisco IMC Emulator 2 Overview 2 Setting up Cisco IMC Emulator 3 Using Cisco IMC Emulator 9 Cisco UCS C-Series IMC Emulator Quick Start Guide Cisco IMC Emulator 2 Overview 2 Setting up Cisco IMC Emulator 3 Using Cisco IMC Emulator 9 Revised: October 6, 2017, Cisco IMC Emulator Overview About

More information

Upgrade Tool Guide. July

Upgrade Tool Guide. July Upgrade Tool Guide July 2015 http://www.liveaction.com 4.X to 5.0 The Upgrade Guide from 4.X to 5.0 consists of three parts: Upgrading the LiveAction Server Upgrading the LiveAction Node Upgrading the

More information

System 44 Installation Guide

System 44 Installation Guide System 44 Installation Guide For use with System 44 v1.0 Suite and SAM v1.8.1 or higher Copyright 2009 by Scholastic Inc. All rights reserved. Published by Scholastic Inc. SCHOLASTIC, SYSTEM 44, SCHOLASTIC

More information

Avid Technology, Inc. Avid LeaderPlus Version Release Notes

Avid Technology, Inc. Avid LeaderPlus Version Release Notes Avid Technology, Inc. Avid LeaderPlus Version 5.2.26 Release Notes This document supplements the Avid LeaderPlus Operations Manual available in PDF and is included on the installation CD as well as the

More information

EventMaster PLUS! Version 4 Installation and Upgrade Guide. Workgroup Deployment Microsoft MSDE 2000

EventMaster PLUS! Version 4 Installation and Upgrade Guide. Workgroup Deployment Microsoft MSDE 2000 EventMaster PLUS! Version 4 Installation and Upgrade Guide Deployment Microsoft MSDE 2000 EventMaster4 PLUS! EventMaster4 PLUS! EventMaster4 PLUS! EventMaster4 PLUS! Please send any comments regarding

More information

Core Services SSL Installation Guide. Service Pack 9, July 2007

Core Services SSL Installation Guide. Service Pack 9, July 2007 Core Services SSL Installation Guide Service Pack 9, July 2007 IONA Technologies PLC and/or its subsidiaries may have patents, patent applications, trademarks, copyrights, or other intellectual property

More information

SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide

SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide Copyright and Trademark Statements 2014 ViewSonic Computer Corp. All rights reserved. This document contains proprietary information that

More information

LiveNX Upgrade Guide from v5.1.2 to v Windows

LiveNX Upgrade Guide from v5.1.2 to v Windows LIVEACTION, INC. LiveNX Upgrade Guide from v5.1.2 to v5.1.3 - Windows UPGRADE LiveAction, Inc. 3500 Copyright WEST BAYSHORE 2016 LiveAction, ROAD Inc. All rights reserved. LiveAction, LiveNX, LiveUX, the

More information

IPNexus Server Secure Instant Messaging & Integrated Collaboration

IPNexus Server Secure Instant Messaging & Integrated Collaboration IPNexus Server Secure Instant Messaging & Integrated Collaboration Version 1.5 Installation & Setup Guide DOC00023 Rev. 1.0 01.03 VCON IPNexus Server Installation & Setup Guide 1 2003 VCON Ltd. All Rights

More information

ipassconnect 3.1 for Mac OS X

ipassconnect 3.1 for Mac OS X ipassconnect 3.1 for Mac OS X Users Guide V e r s i o n 1.3, 1 5 S e p t e m b e r 2 0 0 9 Corporate Headquarters ipass Inc. 3800 Bridge Parkway Redwood Shores, CA 94065 USA www.ipass.com +1 650-232-4100

More information

License Manager Client

License Manager Client License Manager Client Operations Guide NEC NEC Corporation of America November 2010 NDA-30899, Revision 6 Liability Disclaimer NEC Corporation of America reserves the right to change the specifications,

More information

Ontrack PowerControls V7.2 for SharePoint ReadMe

Ontrack PowerControls V7.2 for SharePoint ReadMe Ontrack PowerControls V7.2 for SharePoint ReadMe Contents About the Free Trial System Requirements Installing Ontrack PowerControls Uninstalling Ontrack PowerControls Upgrading Ontrack PowerControls Installing

More information

Installing IPM on Windows

Installing IPM on Windows CHAPTER 5 This chapter describes how to install the IPM server software on Windows NT, Windows 2000 Professional, or Windows 2000 Server system, and how to install the IPM client software on a Windows

More information

Daniel MeterLink Software v1.40

Daniel MeterLink Software v1.40 Quick Start Manual P/N 3-9000-763, Rev K June 2017 Daniel MeterLink Software v1.40 for Daniel Gas and Liquid Ultrasonic Flow Meters Software License Agreement PLEASE READ THIS SOFTWARE LICENSE AGREEMENT

More information

Operating Instructions

Operating Instructions Operating Instructions (For User Setup) Digital Colour Imaging Systems Model No. DP-C406 / C306 / C266 Table of Contents Installation Overview General Installation Overview...2 Installation Installing

More information

Parallels Virtuozzo Containers 4.6 for Windows

Parallels Virtuozzo Containers 4.6 for Windows Parallels Parallels Virtuozzo Containers 4.6 for Windows Deploying Microsoft Clusters Copyright 1999-2010 Parallels Holdings, Ltd. and its affiliates. All rights reserved. Parallels Holdings, Ltd. c/o

More information

Symantec Backup Exec System Recovery Granular Restore Option User's Guide

Symantec Backup Exec System Recovery Granular Restore Option User's Guide Symantec Backup Exec System Recovery Granular Restore Option User's Guide Symantec Backup Exec System Recovery Granular Restore Option User's Guide The software described in this book is furnished under

More information

Dell Repository Manager Business Client Version 2.2 User s Guide

Dell Repository Manager Business Client Version 2.2 User s Guide Dell Repository Manager Business Client Version 2.2 User s Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION

More information

Installation Guide Worksoft Certify

Installation Guide Worksoft Certify Installation Guide Worksoft Certify Worksoft, Inc. 15851 Dallas Parkway, Suite 855 Addison, TX 75001 www.worksoft.com 866-836-1773 Worksoft Certify Installation Guide Version 9.0.3 Copyright 2017 by Worksoft,

More information

OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3.1

OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3.1 OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3.1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use

More information

Dell Repository Manager Business Client Version 2.1 User s Guide

Dell Repository Manager Business Client Version 2.1 User s Guide Dell Repository Manager Business Client Version 2.1 User s Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION

More information

Agilent GeneSpring Software

Agilent GeneSpring Software Agilent GeneSpring Software Installation Guide Quick Start Installation of Agilent GeneSpring 3 Detailed Instructions for Installing Agilent GeneSpring 5 Managing Licenses 16 Upgrading Agilent GeneSpring

More information

Avigilon Control Center Server User Guide

Avigilon Control Center Server User Guide Avigilon Control Center Server User Guide Version 4.12 PDF-SERVER-E-Rev1 Copyright 2012 Avigilon. All rights reserved. The information presented is subject to change without notice. No copying, distribution,

More information

PropertyBoss Upgrade

PropertyBoss Upgrade Installation Guide EMC128-2013 1998-2013 PropertyBoss Solutions. Introduction This document covers 2 upgrade scenarios. Please determine which is required before beginning. Note: The Release version or

More information

READ ME FIRST Windows 95/98/Me/2000

READ ME FIRST Windows 95/98/Me/2000 READ ME FIRST Windows 95/98/Me/2000 *DSL Equipment Installation Guide: Efficient Networks 5260 *Digital Subscriber Line Part Number: 52609x02 Version 1.2-A Table of Contents Follow Steps 1 through 8 to

More information

Dell EMC Repository Manager Version 3.2. Quick Start Guide

Dell EMC Repository Manager Version 3.2. Quick Start Guide Dell EMC Repository Manager Version 3.2 Quick Start Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates

More information

EZSwitchSetup. Administrator s Guide. Supporting Fabric OS v Supporting Brocade 300, 4100, 4900, 5000, 5100, 5300, 7800, 8000

EZSwitchSetup. Administrator s Guide. Supporting Fabric OS v Supporting Brocade 300, 4100, 4900, 5000, 5100, 5300, 7800, 8000 28 July 2009 EZSwitchSetup Administrator s Guide Supporting Fabric OS v6.3.0 Supporting Brocade 300, 4100, 4900, 5000, 5100, 5300, 7800, 8000 Copyright 2006-2009 Brocade Communications Systems, Inc. All

More information

Mar Fabric Manager. Administrator s Guide. Supporting Fabric Manager Supporting Fabric OS 6.1.0

Mar Fabric Manager. Administrator s Guide. Supporting Fabric Manager Supporting Fabric OS 6.1.0 12 Mar 2008 Fabric Manager Administrator s Guide Supporting Fabric Manager 5.5.0 Supporting Fabric OS 6.1.0 Copyright 2008 Brocade Communications Systems, Inc. All Rights Reserved. Brocade, the Brocade

More information

Connectware Manager Getting Started Guide

Connectware Manager Getting Started Guide Connectware Manager Getting Started Guide 90000699_B 2004, 2005 Digi International Inc. Digi, Digi International, the Digi logo, the Digi Connectware log, the Making Device Networking Easy logo, Digi

More information

Silk Performance Manager Installation and Setup Help

Silk Performance Manager Installation and Setup Help Silk Performance Manager 18.5 Installation and Setup Help Micro Focus The Lawn 22-30 Old Bath Road Newbury, Berkshire RG14 1QN UK http://www.microfocus.com Copyright 2004-2017 Micro Focus. All rights reserved.

More information

Abila MIP. Human Resource Management Installation Guide

Abila MIP. Human Resource Management Installation Guide Human Resource Management Installation Guide This is a publication of Abila, Inc. Version 2017.2 2017 Abila, Inc. and its affiliated entities. All rights reserved. Abila, the Abila logos, and the Abila

More information

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version 2009.1 2009 Sage Software, Inc. All rights reserved. Published by Sage 2325 Dulles Corner

More information

Veritas System Recovery 16 Management Solution Readme

Veritas System Recovery 16 Management Solution Readme Veritas System Recovery 16 Management Solution Readme About this readme System requirements for software delivery policies of Veritas System Recovery 16 System requirements for Veritas System Recovery

More information

Upgrading Prime Optical

Upgrading Prime Optical CHAPTER 6 You cannot perform a full upgrade from an earlier Cisco Transport Manager (CTM) or Prime Optical release. This section describes how to use the Cisco Prime Optical 9.8 Data Migrator wizard to

More information

Veritas Backup Exec Quick Installation Guide

Veritas Backup Exec Quick Installation Guide Veritas Backup Exec Quick Installation Guide Legal Notice Copyright 2017 Veritas Technologies LLC. All rights reserved. Veritas and the Veritas Logo are trademarks or registered trademarks of Veritas Technologies

More information

Authentication Services ActiveRoles Integration Pack 2.1.x. Administration Guide

Authentication Services ActiveRoles Integration Pack 2.1.x. Administration Guide Authentication Services ActiveRoles Integration Pack 2.1.x Administration Guide Copyright 2017 One Identity LLC. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright.

More information

Quick Start Guide. Takes only a few minutes to read S. De Anza Blvd., Suite #106 San Jose, CA Phone: (408) Fax: (408)

Quick Start Guide. Takes only a few minutes to read S. De Anza Blvd., Suite #106 San Jose, CA Phone: (408) Fax: (408) Quick Start Guide Takes only a few minutes to read 1340 S. De Anza Blvd., Suite #106 San Jose, CA 95129 Phone: (408) 872-3103 Fax: (408) 861-9601 Welcome to AddressGrabber Suite! Thank you for choosing

More information

CaliberRDM. Installation Guide

CaliberRDM. Installation Guide CaliberRDM Installation Guide Borland Software Corporation 4 Hutton Centre Dr., Suite 900 Santa Ana, CA 92707 Copyright 2010 Micro Focus (IP) Limited. All Rights Reserved. CaliberRDM contains derivative

More information

Installing the Product Software

Installing the Product Software CHAPTER 1 The Cisco Configuration Engine is a network management software that acts as a configuration service for automating the deployment, management, and upgrading of network devices and services.

More information

Novell ZENworks Asset Management 7.5

Novell ZENworks Asset Management 7.5 Novell ZENworks Asset Management 7.5 w w w. n o v e l l. c o m October 2006 MIGRATING & UPGRADING Table Of Contents 1. Migrating and Upgrading... 3 Upgrading from Earlier Versions...3 Upgrading Client

More information