Package Contents... 1 Applied Models... 2 Specifications... 3 Reset Button... 4 Download & Install App... 5 Setup One Touch Setup

Size: px

Start display at page:

Download "Package Contents... 1 Applied Models... 2 Specifications... 3 Reset Button... 4 Download & Install App... 5 Setup One Touch Setup"

Brianna Turner
6 years ago
Views:

2 Contents Page Package Contents... 1 Applied Models... 2 Specifications... 3 Reset Button... 4 Download & Install App... 5 Setup One Touch Setup Device Setting Camera Authorization Setting Firmware Update Other Setting Local Player Single-Play Multi-Play Remote Player DLNA Player FTP Client Remote Control Panel LED Control Automatic Mode Manual Mode Camera Remote Monitoring Register User Account Adding MediaWalker 963 Device Remote Monitoring One Touch SOS Alarm Setting Motion Detection Alarm Setting Remote Light Control Remote Controller Copyright and Trademark Notice... 47

Extra Model ) Note: UMID Label is an important information for "

3 Package Contents MediaWalker 963 x 1 Remote Controller x 1 Quick Guide x1 User Manual x1 Warranty Card x1 UMID Label x1 ( Not for Extra Model ) Note: UMID Label is an important information for " Camera Remote Monitoring " setting, please keep it in safe place. 1

4 Applied Models No. Model Storage Camera Mic R/C 1 LR963 Extra LR963EX0-R 0 X X R 2 LR963 Pro LR963PC0-R 0 C M R 3 LR963 Deluxe4 LR963DC4-R 4 C M R 4 LR963 Deluxe8 LR963DC8-R 8 C M R Mediawalker 963 Models Table 2

5 Specifications E27 Lamp holder 86mm 140mm 3

download and install MediaWalker App. 3.

7 Download & Install App 1. Download and install MediaWalker App either from Google Play or App store. 2. User can scan the following QR code to download and install MediaWalker App. 3. Start the MediaWalker App after installed. For Android For ios 5

8 Android users can click on the slide command tab at the upper left corner to start (Fig 1). Fig 1 ios users can click on " More " to start (Fig 2). Note: Although these two interfaces appear differently, the flow and functions are the same. The following steps will use Android App to demonstrate how it works. Fig 2 6

9 Setup 1. One Touch Setup Automatic Setup 1. Connect the mobile device which installed with MediaWalker App to the WiFi router. 2. Start MediaWalker App, click on the slide command tab at the upper left corner and choose " Setup " (Fig 3), select " One Touch Setup " (Fig 4). 3. Enter the password for the particular router, press " next " to continue (Fig 5). Fig 3 Fig 4 Fig 5 7

4. One short press on " Reset " button which located beside the camera on MediaWalker 963 or short press button once on the Remote Controller, then press " next " on App to start the auto setting

10 4. One short press on " Reset " button which located beside the camera on MediaWalker 963 or short press button once on the Remote Controller, then press " next " on App to start the auto setting (Fig 6). Note: Short press button once for " One Touch Setup ". Short press button twice within 2 seconds for " WPS ". Press " Reset " button and hold it more than 5 seconds for Fig 6 5. Wait for MediaWalker 963 connected to the WiFi router, the message of " Router Connected " will be heard if the connection is successful. Otherwise, it will prompt " Fail to connect WiFi " to inform user to try again (Fig 7). 8 Fig 7

11 2. Device Setting Manual Setup a. Connecting Mobile Device 1. Turn on the setup of your mobile device such as iphone, ipad, Android phone. Setup WiFi on the mobile device and search for the AP router with SSID name : mw946x_xxxxxx. 2. Default password : It will show the AP connected if the connection is successful (Fig 8). Note:Open browser on your mobile to connect any website, if the website on the internet can be accessed, the process of " One Touch Setup " was successful. Fig 8 9

12 b. Login Mediawalker 963 as Admin 1. Start MediaWalker App. 2. Select the slide command tab at the upper left corner and select " Setup " (Fig 9). 3. Choose " Device Setting " for the configu - ration setup (Fig10). 4. Default login name : admin 5. Default login password : admin 6. After login as admin to Mediawalker 963, there will be two options : " Network Setup Wizard " & " Network Page Setup " to choose from. Fig 9 10 Fig 10

13 (1) Network Setup Wizard 1. Choose " Network Setup Wizard " to start a step by step setup for WiFi (Fig 11). (no Ethernet setup for MediaWalker 963) 2. " Remote AP SSID " : Click on the small triangle at the end of the option box, select the remote AP router from available list for uplink connection later (Fig 12). 3. " WPA Passphrase " : Enter the password for remote AP router in previous step then press " SUBMIT " (Fig 13). 4. Any changed parameter will take effect after system restarts. Wait for the " Welcome Message " is heard which indicate the system is ready. Note: Password for WPA/WPA 2 will be automatically recognized even it only shows WPA. 11

14 Fig 11 Fig 12 Fig 13 12

15 (2) Network Page Setup 1. Choose " Network Page Setup " for configuration page. 2. WAN Type : Select " WiFi ". 3. WAN IP Mode : Select " DHCP ". 4. Remote AP SSID : Click on the small triangle at the end of the option box, select the remote AP router from available list for uplink connection later. 5. WPA Password : Enter the password for remote AP router in previous step, then press " SUBMIT " (Fig 14). 6. Any changed parameter will take effect after system restarts. Wait for the " Welcome Message " is heard to indicate the system is ready. Fig 14 Note: Password for WPA/WPA 2 will be automatically recognized even it only shows WPA. 13

16 3. Camera Authorization Setting Not for Extra Model 1. The setting is for " Remote Monitoring ". 2. Select " Setup " and then " Camera Authorization Settings " (Fig 15,16). Fig 15 14

3. Choose the SSID of MediaWalker 963 device to

in the package and it is not recoverable if you

17 3. Choose the SSID of MediaWalker 963 device to initiate the camera (Fig 17). 4. Enter the UMID for MediaWalker 963 (Fig 18). Note: 3 years licensed UMID label is included in the package and it is not recoverable if you lost the UMID. Please keep it in safe place. Fig 16 Fig 17 Fig 18 15

Start MediaWalker 963 App and select the slide command tab at the upper left corner, select " Setup " " About"

18 4. Firmware Update 1. Make sure MediaWalker 963 is connected to the Internet. 2. Connect your mobile device with MediaWalker 963 by login as WiFi client. 3. Start MediaWalker 963 App and select the slide command tab at the upper left corner, select " Setup " " About" choose the SSID of MediaWalker 963 device which firmware needs to be upgrade (Fig 19,20). 4. About screen will display the current firmware version and App version (Fig 21). Fig 19 Fig 20 Fig 21 16

19 5. Place 2 fingers on the " About Screen " for more than 7 seconds to activate, click on the " Version Update " to start the firmware upgrade (Fig 22). 6. Select " Stable Upgrade " to perform the upgrade (Fig 23). (Beta Upgrade is for testing only) 7. Follow the wizard step by step to process the upgrade procedure (Fig 24). Note: During firmware upgrade, be sure to keep the product in Power-On and connected to the internet. Wait until MediaWalker 963 auto restart and send out the " Welcome Message " which indicate the firmware upgrade is completed. Fig 22 Fig 23 Fig 24 17

20 5. Other Setting 1. Select " Setup ", and then select the SSID of MediaWalker 963 device. 2. " Audio Output Setting " User can change audio output from either stereo or optical. (Not for MediaWalker 963) 3. " AUX-OUT Channel Setting " User can select Mediawalker 963 channel output from stereo, left or right. 4. " Language Setting " User can choose voice prompt in different language (Fig 25). Fig 25 18

Local Player 1. Single-play 1. Click the slide command tab at the upper left corner and choose " Local Player " to list the music contents in your mobile device (Fig 26

21 Local Player 1. Single-play 1. Click the slide command tab at the upper left corner and choose " Local Player " to list the music contents in your mobile device (Fig 26). 2. Choose the desired music, click on the control button on the right corner will control the music to play either on local device or on the MediaWalker 963 via WiFi (Fig 27). 3. Use either Volume bar or push button to adjust the volume (Fig 28). Fig 26 Fig 27 Fig 28 19

22 2. Multi-play For Music on Mobile Devices 1. Multi-play function can be used to play music when either two or more MediaWalker 963 devices connected in same network. 2. Click the slide command tab at the upper left corner and choose " Local Player " to list the music contents in the mobile device (Fig 29). Fig 29 20

MediaWalker 963 via WiFi (Fig 30,31). 4.

23 3. Choose the desired music, click on the control button on the right corner will control the music either plays on local device or on the MediaWalker 963 via WiFi (Fig 30,31). 4. Push button to adjust the volume on listed MediaWalker 963 devices (Fig 32). Fig 30 Fig 31 Fig 32 21

Click on the slide command tab at the upper left corner and choose the " Remote

24 Remote Player 1. Detect Song List 1. For Deluxe4 / Deluxe8 only. 2. The audio contents in 4GB / 8GB storage can be play by remote player. 3. Click on the slide command tab at the upper left corner and choose the " Remote Player " to update the song list (Fig 33,34). 4. Click on the desired music to play (Fig 35). Fig 33 Fig 34 Fig 35 22

25 2. Create and Add Song to New Song List 1. Select " More " command button, then proceed the option of "New list to remote device" (Fig 36). 2. Enter the name for the list and press " OK " to create a new list (Fig 37). Fig 36 Fig 37 Fig 38 23

With the " Remote play-list change " option active, it will enable user to switch song list to play (Fig 40).

26 3. User can add a song to playlist by holding down on any particular song, select " Add to playlist " command, and choose the playlist (Fig 38,39). 4. With the " Remote play-list change " option active, it will enable user to switch song list to play (Fig 40). 5. While in the song list, user can change the sequence by hold down to the selected song and move it up & down or delete the song if needed (Fig 41). Fig 39 Fig 40 Fig 41 24

DLNA Player " to list the music contents in the mobile device (Fig 42).

27 DLNA Play 1. Click on the slide command tab at the upper left corner and choose the " DLNA Player " to list the music contents in the mobile device (Fig 42). 2. Select " Play From " and " Play To " (Fig 43), then choose " Directory listing " or " File list " (Fig 44). Fig 42 Fig 43 Fig 44 25

28 3. Directory listing will list all folders from play sources, select the desired music and play (Fig 45,46,47). 4. File list will list all music contents, select the desired music and play (Fig 46,47). Fig 45 Fig 46 Fig 47 26

29 FTP Client 1. MediaWalker 963 can serve as a FTP server which allows mobile devices to access as a FTP client. 2. Only Deluxe 4 and Deluxe 8 models support 4GB / 8GB storage for FTP. 3. Click on the slide command tab at the upper left corner and choose the " FTP Client " (Fig 48). Fig Click on the device to list the files on storage devices then login (Fig 49). 5. Select " Remote " to download songs to the mobile device. Select " Local " to upload songs to MediaWalker 963 (Fig 50,51,52,53). 6. Use the function menu at the upper right corner to cut, rename, paste or add new folder (Fig 54). 27

30 Fig 49 Fig 50 Fig 51 Fig 52 Fig 53 Fig 54 28

31 Remote Control Panel 1. For Deluxe 4 / Deluxe 8 models only. 2. Click on the slide command tab at the upper left corner and choose the " Remote Control Panel " to list the music contents in MediaWalker 963 (Fig 55,56). 3. The " Remote Control Panel " function slightly different from actual remote controller, it is applies only to play music from MediaWalker 963 or listen to the Internet radio. Fig Fig 56

LED Control 1. Short press button on Remote Controller to open the control of LED. 2. button for adjusting brightness of LED. Note: Short press button again to close the control of LED.

32 LED Control 1. Short press button on Remote Controller to open the control of LED. 2. button for adjusting brightness of LED. Note: Short press button again to close the control of LED. Note: Long press the button to disable the camera, and the system voice prompts "Camera Disable", long press the button again to enable the camera, the system voice prompts "Camera Enable".By default, the camera is enabled. Fig Click on the slide command tab at the most upper left corner on the App and choose " LED Control " (Fig 57). 4. Select SSID of MediaWalekr 963 device and click on " Mode Select " (Fig 58). 30 Fig 58

33 1. Automatic Mode 1. Select the " Automatic Mode " (Fig 59). Fig Click on " Scene 1 ", the color of LED will changed automatically (Fig 60). 3. Click on " Scene 2", the color of LED will changed in an orderly fashion (Fig 60). 31 Fig 60

34 2. Manual Mode 1. Select " Manual mode " (Fig 61). 2. Choose the desired color around the bulb, press " ok " to change the LED color (Fig 62). 3. Click on the icon to toggle the LED, the LED color will be changed following music. 4. The on/off switch for white LED. Upside to turn on. 5. The on/off switch for color LED. Upside to turn on. 6. The control bar for brightness adjusting. Fig 61 Note: To adjust the color LED, either put the Br. slider to the left side or turn the white LED switch off. 32 Fig 62

35 Camera Remote Monitoring Not for Extra Model 1. Make sure your mobile device is login on MediaWalker 963 and MediaWalker 963 is connecting to the Internet. 2. Be sure the " Camera Authorization Setting " is complete. 3. Click on the slide command tab at the upper left corner and choose " Remote Monitoring " (Fig 63). Fig 63 33

Note 1: " Email " - Use active Email address for retrieve password if needed.

36 1. Register User Account 1. Click on the slide command tab at the upper left corner and choose " Remote Monitoring ". 2. Choose " Register " to register the user account and enter the information accordingly to complete the registration (Fig 64,65). Note 1: " " - Use active address for retrieve password if needed. Note 2: " Phone number " Be sure to use active phone number for alarm message delivery. 3. Return to the same page; enter the same login name and password from previous steps (Fig 66). Fig 64 Fig 65 Fig 66 34

37 2. Add MediaWalker 963 Device 1. Click on icon at the upper right corner. Press " Add Device " to add MediaWalker 963 (Fig 67,68). 2. Click on icon at the upper right corner to search for MediaWalker 963 (Fig 69 ). Fig 67 Fig 68 Fig 69 35

3. Click on the " + " button to add the device on the list (Fig 70). Fig 70 4.

38 3. Click on the " + " button to add the device on the list (Fig 70). Fig Name the device and select " p2p Device", enter default password : " admin " and choose " Sub Code ", then press " Save " to complete (Fig 71). 36 Fig 71

39 3. Remote monitoring 1. Click on the " Device Icon " to view the live video from MediaWalker Double clicks on the active window to switch to full screen (Fig 72, 73). Fig 72 Fig 73 Fig 74 37

40 1. Click on the button to listen to the sound. 2. Click on the button to change the resolution to. 3. Click on the button to stop the streaming. 4. Click on the button to capture the picture. 5. Click on the button to record the video. 6. Click on the button to enable the voice transmitting from mobile to MediaWalker 963. Hold on button to send voice to MediaWalker 963 from mobile device. 7. Click on the button to open the slide command and click on the button to view captured images or recorded contents (Fig 74). 38

41 4. One Touch SOS Alarm Setting 1. Select the slide command tab at the upper right corner from MediaWalker 963 (Fig 75). 2. Click on Arming setting icon for MediaWalker 963, Select " Alarm Setting " (Fig 76,77). Fig 75 Fig 76 Fig 77 39

42 3. Switch both " Alarm Receiver Enable"and " SOS Enable ",then press save to complete the process. When button has been pressed on the remote controller, the system will automatically notify the phone owner (Fig 78, 79). Fig Fig 79

43 5. Motion Detection Alarm Setting 1. Select the slide command tab at the upper right corner from MediaWalker 963 (Fig 80). 2. Click on Arming setting icon for MediaWalker 963, Select " Alarm Setting " (Fig 81, 82). Fig 80 Fig 81 Fig 82 41

44 3. Switch both " Alarm Receiver Enable " and " Motion Detection Enable ",then press save to complete the process. When the camera is blocked and the image moves, the system will automatically notify the phone owner (Fig 83,84). Fig Fig 84

45 6. Remote Light Control 1. Select the slide command tab at the upper right corner from MediaWalker 963 (Fig 80). 2. Click on setting icon for MediaWalker 963, select " Remote Light Control " (Fig 81,85). 3. And then you can control the light through the network (Fig 86). Fig Fig 86

47 Volume Down Previous track / channel Brighten the white LED (while LED is in use LED mode) Next track / channel Dim the white LED (while LED is in use LED mode) Track Number/Channel Number Short press once on the Reset button for " One Touch Setup " Short press twice within 2 seconds for " WPS " Press and hold it more than 5 seconds for " Reset " " Enter " after number key /keys. " One touch alarm " without number key. 45

48 These are additional features on MediaWalker 963, user are welcome to check on the details from the website: i-trinetech Co., Ltd. 10F., No.108, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan Tel: +886 (2) Fax: +886 (2) th Fl., East Wing of M-8 Building, Sparrow Ridge Industrial Zone, Science & Technology Park, Nanshan Dist., Shenzhen City, China Tel: +86 (0) Fax: +86 (0)

49 Copyright and Trademark Notice 2014 by i-trinetech Co., Ltd. All rights reserved. Information in this document is subject to be changed without notice. No part of this document may be reproduced and /or transmitted in any form by any means, electronic and/or mechanical without prior written permission of i-trinetech Co., Ltd. i-trinetech Co., Ltd. takes no responsibilities or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. i-trinetech Co., Ltd. reserves the right to revise this manual and to make changes in its content without obligation to notify any person or organization of such revision of change. In no event shall i-trinetech Co., Ltd. be liable to you and any third party for any consequential, incidental, direct, indirect, special, punitive, and other damages (including without limitation, damages for loss of profits, interruptions, loss of information, pecuniary loss etc.), even if i-trinetech Co., Ltd. has been advised of the possibility of such damages arising from any defect or error in this manual and product. Updates to this documentation can be obtained from our website: 47

P/N:4P MediaWalker Extra 948 MediaWalker Pro 948 MediaWalker Advance 948 MediaWalker Deluxe 948 User Guide. Sept, Ver. 1.0.

P/N:4P MediaWalker Extra 948 MediaWalker Pro 948 MediaWalker Advance 948 MediaWalker Deluxe 948 User Guide. Sept, Ver. 1.0. P/N:4P0108094801 MediaWalker Extra 948 MediaWalker Pro 948 MediaWalker Advance 948 MediaWalker Deluxe 948 User Guide Sept, 15 2014 Ver. 1.0.0 1 Copyright and Trademark Notice 2014 by i-trinetech Co., Ltd.