Created September 2010
|
|
- Antony Riley
- 6 years ago
- Views:
Transcription
1 Created September 2010 The application note will show you how to install a Star Micronics printer on Debian 5.0. While these directions show to install a TSP650, these directions suffice for installing any USB or Ethernet Star Micronics Printers. Pre-Requisites: The latest Linux CUPS driver for which can be downloaded from the Star Micronics website: Libcupsys2-dev Libcupsimage2-dev Alien Table of Contents Installing Prerequisites and CUPS Driver.Page 1 Installing a USB Printer.Page 2 Installing an Ethernet Printer Page 4 Installing Prerequisites and CUPS Driver 1) Open Terminal and type in su and then the password. 2) Type each line separately: apt-get install libcupsys2-dev apt-get install libcupsimage2-dev apt-get install alien 3) In Terminal, change the directory to the driver folder in the Linux CUPS package. (For example: cd /home/tech/desktop/starcupsdrv-3.1.1_linux/driver ) 4) Type the following command in terminal: alien i starcupsdrv i386.rpm. If necessary, type in the password. The CUPS driver and all necessary prerequisites are now installed. Refer to the Installing a USB Printer section to install and configure a USB Star Micronics printer, or the Installing an Ethernet Printer to install and configure an Ethernet Star Micronics printer.
2 Installing a USB Printer *Note Before starting this section, make sure that all the pre-requisites and the Linux CUPS driver have been installed. If not, refer to the Installing Prerequisites and CUPS Driver. 1) Plug the printer into the computer and turn it on, the computer will automatically detect and add the printer. 2) Access CUPS by typing in localhost:631 in the address bar on an Internet browser, then click on the Printers tab. 3) Click on Set Printer Options under the proper printer model.
3 4) Select 72 * 200mm for the Media Size, and then click on Set Printer Options. If prompted for a password, type in root as the username and root password that has been set on the computer. 5) Click on Print Test Page under the proper printer model. Congratulations, you have successfully configured your USB Star Micronics printer and have successfully printed out a test page!
4 Installing an Ethernet Printer *Note Before starting this section, make sure that all the pre-requisites and the Linux CUPS driver have been installed. Perform a hardware self test on the printer by turning the power off, holding the feed button down, and turning the printer back on. It will print two tests. The second test will show the current IP parameters at the bottom of the page. It will display the DHCP or BOOTP IP address. If it shows all zeros with Didn t obtain, an IP address must be manually assigned via Terminal. To manually assign an IP address using the arp command: Open Terminal and type in arp s IP address MAC address. ( For example: arp s :11:62:05:1D:DD) 1) In Terminal, type telnet and the IP address. (For example: telnet ) 2) Type in root for the username, and public for the password and then press Enter. 3) Type 1 to select IP Parameters Configuration and then press Enter.
5 4) Type 1 to select the static IP configuration and then press Enter. 5) Type 1 to change the IP address, type in an IP address to set the printer and then press Enter. (For example: ) 6) Type 2 to change the Subnet Mask, type in the Subnet Mask to set for the printer and then press Enter. (For example: )
6 7) Type 99 to select Back to Main Menu and then press Enter. 8) Type 98 to select Save & Restart and then press Enter. 9) Type 1 to select Save & Configuration printing & Restart device and then press Enter. The printer will restart and print out the IP configuration that has been set.
7 10) Access CUPS by typing in localhost:631 in the address bar on an Internet browser, and click on Add Printer. 11) Type in the printer s name (required), description (not required), and location (not required), and then click on Continue.
8 12) In the drop down menu, select LPD/LPR Host or Printer, and then click on Continue. 13) Type in the Device URI as follows - lpd://ip address/printer name (For example - lpd:// /tsp650ethernet ), and then click on Continue.
9 14) Select STAR in the Make drop down box, and then click on Continue. 15) Choose the appropriate printer model that matches your printer model, and then click on Add Printer.
10 16) Change the Media Size to 72mm * 200mm, and then click on Set Default Options. If prompted, type in the username and password. 17) Click on Print Test Page under the proper printer model. Congratulations, you have successfully configured your Ethernet Star Micronics printer and have successfully printed out a test page!
Thermal Label Printer TSP828L. Software Manual. Linux. Rev. 3.1
Thermal Label Printer Software Manual Linux Rev. 3.1 The company names and product names that appear in this manual are generally trademarks or registered trademarks of each company. Table of Contents
More informationInstalling a Star Ethernet Printer on Mac OS X via the Browser
Introduction Application Note Installing a Star Ethernet Printer on Mac OS X via the Browser This application note shows how to install a Star Ethernet printer with a Static IP Address using the browser.
More informationGuidelines of Ethernet for Using a Star Dvice. - Windows - Rev. 2.0
Guidelines of Ethernet for Using a Star Dvice - Windows - Rev. 2.0 Guidelines for Using a Star Ethernet Device on Windows The star dvice s IP address must be set in advance to use a star device that supports
More information8.9.2 Lab: Configure an Ethernet NIC to use DHCP in Windows Vista
8.9.2 Lab: Configure an Ethernet NIC to use DHCP in Windows Vista Introduction If Vista is not available in your classroom, you may complete this lab by viewing the figures in this document. Print and
More informationInstalling the PR IM Kitchen and Bar Printers.
Installing the PR IM Kitchen and Bar Printers. To correctly install the Kitchen and bar printers they must first be placed in their location, plugged in and connected via cat 5 Ethernet cable to the Router.
More informationGuidelines of Ethernet for Using a Star Device. - Mac OS X - Rev. 3.0
Guidelines of Ethernet for Using a Star Device - Mac OS X - Rev. 3.0 Guidelines for Using an Etehrnet Star Device on Mac OS X The star device s IP address must be set in advance to use a star device that
More informationSoftware Manual. for Mac OS X. Supported Models. FVP10 Series. Rev. 3.0
Software Manual for Mac OS X Supported Models Series Rev. 3.0 Notice: Mac, MacOS, MacBook, imac are trademarks of Apple Inc., registered in the U.S. and other countries. The information in this manual
More informationCreated February 2009
Created February 2009 This application note shows how to configure the HSP7000 for Computerworks of Chicago Inc s Booklog software to print receipts and endorse checks. HSP7000 Connection Interfaces Supported:
More informationSoftware Manual. for macos. Supported Models. FVP10 Series. Rev. 3.3
Software Manual for macos Supported Models Series Rev. 3.3 Notice: Bluetooth wordmark and logo are registered trademarks owned by Bluetooth SIG, Inc. macos, Mac, OS X, Mac mini, imac are trademarks of
More informationDSL-G624T. Wireless ADSL Router. If any of the above items is missing, please contact your reseller. This product can be set up using any
This product can be set up using any current web browser, i.e., Internet Explorer 6x or Netscape Navigator 7x. DSL-G624T Wireless ADSL Router Before You Begin 1. If you purchased this Router to share your
More informationPrinter Driver for Red Hat Linux
Printer Driver for Red Hat Linux You can print from any application by using CUPS (Common Unix Printing System), which is the printing system for Linux. To use this software, the
More informationKramer Electronics, Ltd. ETHERNET Configuration (FC-11) GUIDE
Kramer Electronics, Ltd. ETHERNET Configuration (FC-11) GUIDE Contents Contents 1 Configuring the Ethernet Port 1 1.1 Setting a Virtual Port 3 1.2 Setting an Ethernet Connection 5 Figures Figure 1: The
More informationLongshine Technologie Europe GmbH LCS-MFP101-2 Multifunction Printserver
Longshine Technologie Europe GmbH LCS-MFP101-2 Multifunction Printserver www.longshine.de TABLE OF CONTENTS COPYRIGHT...2 1. INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION...3
More informationTable of Contents I. WiFi Power Pack (TP-Link) Setup via WiFi Page 1 II. Static IP Address through telnet.. Page 9
How to configure WiFi Power Pack on Android Device Introduction Application Note Number: 271 This application note will show you how to setup the WiFi Power Pack to use with Star Printers on Android device.
More informationUser Manual. Unpacking and Setup
User Manual USB Print Server LPV2-USB-TX1 Unpacking and Setup This section provides unpacking and setup information for the USB Print Server. Unpacking Open the shipping carton of the Switch and carefully
More informationInstalling + Configuring
Installing + Configuring Install and Recover with TFTP Introduction This document is designed to help you install the Commotion software if the Install on a Ubiquiti Device instructions did not work, or
More informationC5100 Computer Connections & Software Install Guide
C5100 Computer Connections & Software Install Guide Installation Checklist Network Install: Hardware...4 Connect to the Network Port...4 Network Install: Software...5 TCP/IP...5 Local Install: USB, Hardware...7
More informationPROCEDURE FOR UPDATING TM-m10 FIRMWARE TO v1.60
REASON FOR THIS UPDATE PROCEDURE FOR UPDATING TM-m10 FIRMWARE TO v1.60 Epson has learned of a firmware vulnerability (CVE-2017-6443) impacting certain Epson Ethernet and wireless POS products, including
More informationTABLE OF CONTENTS COPYRIGHT INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION
TABLE OF CONTENTS COPYRIGHT...2 1. INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION...3 2. MFP SERVER INSTALLATION...5 PREPARATION...5 CONFIGURATION SOLUTION TABLE...5
More informationCongratulations on purchasing Hawking s HWPS12UG 1-Port Parallel + 2 USB Ports Wireless G Print Server. The Hawking HWPS12UG is a powerful and
Congratulations on purchasing Hawking s HWPS12UG 1-Port Parallel + 2 USB Ports Wireless G Print Server. The Hawking HWPS12UG is a powerful and convenient network printing solution that will connect your
More informationFiery Installation Instructions for the WorkCentre 7300 Series
Fiery Installation Instructions for the WorkCentre 7300 Series This document describes how to install and set up the Fiery Network Controller for WorkCentre 7300 Series. IMPORTANT: The complete installation
More informationInstallation Guide Linux CUPS Driver Rev. 1.01
Installation Guide Linux CUPS Driver Rev. 1.01 http://www.bixolon.com 1. Search and execute the terminal program. 2. Download Linux CUPS driver in BIXOLON website. 3. Once driver download is completed,
More informationSoftware Manual. for Mac OS X. Supported Models. SM-T300i SM-T400i SM-S220i SM-S230i SM-L200. Rev. 1.0
Software Manual for Mac OS X Supported Models SM-T300i SM-T400i SM-S220i SM-S230i SM-L200 Rev. 1.0 Notice: Mac, MacOS are trademarks of Apple Inc., registered in the U.S. and other countries. The information
More informationLab - Connect to a Router for the First Time
Introduction In this lab, you will configure basic settings on a wireless router. Recommended Equipment A computer with Windows installed An Ethernet NIC installed Wireless router Ethernet patch cable
More information802.11g Super-G 108Mb Wireless Access Point Quick Installation Guide
802.11g Super-G 108Mb Wireless Access Point Quick Installation Guide The enclosed Hardware Installation Guide gives you a step-by-step explanation of how to install your 108Mb Super-G PCI Adapter. Further
More informationSoftware Manual. for Mac OS X. Supported Models. TUP900 Series TUP500 Series. Rev. 2.2
Software Manual for Mac OS X Supported Models TUP900 Series TUP500 Series Rev. 2.2 Notice: Mac, MacOS, MacBook, imac are trademarks of Apple Inc., registered in the U.S. and other countries. The information
More informationP964 APR 964 Cable Router with 11g AP Quick Installation Guide VER. 1.0
P964 APR 964 Cable Router with 11g AP Quick Installation Guide VER. 1.0 CABLE POWER PORT LAN1~LAN4 Rear Panel Connections CONNECTION Connect the F-type connector to the CATV outlet using a coaxial cable.
More informationOptiRain Open 2 Installation Guide for LInux. This guide provides general instructions for installing OptiRain Open 2 on a Linux based server.
QUICKSMART OptiRain Open 2 Installation Guide for LInux QuickSmart Development P.O. Box 3689 Santa Clara, CA 95055 408-777-0944 www.quicksmart.com This guide provides general instructions for installing
More informationThermal Printer Configuration (EPSON)
Thermal Printer Configuration (EPSON) STEP A : IDENTIFY THE THERMAL PRINTER MODEL Check for your EPSON printer model by finding the label on the printer. Figure 1.1 For the example above (Figure 1.1),
More informationDI-704P Ethernet Broadband Router. Ethernet (Straight Through) Cable. 5V DC Power Adapter
1 This product can be set up using any current Web browser, i.e., Internet Explorer or Netscape Navigator. DI-704P Ethernet Broadband Router and Print Server Before You Begin 1. If you purchased this router
More informationCreated April Click the Windows Start button and navigate Programs > StarMicronics > Star TSP100 > TSP100 Configuration Utility
Page1 Created April 2009 This application note shows how to set up Star single-station printers for receipt printing from InfoTouch Store Keeper POS Software. While this application note was written using
More informationPrint Server. User s Manual. Rev. 01 (April, 2004) Made In Taiwan
Print Server User s Manual Rev. 01 (April, 2004) Made In Taiwan TABLE OF CONTENTS ABOUT THIS GUIDE... 4 INTRODUCTION... 5 PACKAGE CONTENTS... 6 SYSTEM REQUIREMENTS... 6 GENERAL FEATURES... 7 PRODUCT VIEW...
More informationMassey University Follow Me Printer Setup for Linux systems
Massey University Follow Me Printer Setup for Linux systems RedHat and Debian based systems Requirements You must have an active Massey network account, i.e. you should already be able to log onto the
More informationSMC Barricade Routers
SMC Barricade Routers User Guide SMC7004BR V1.0 Congratulations on your purchase of the SMC Barricade. The SMC Barricade is a Broadband Router designed to share Internet Access, provide security, and to
More informationScopTEL TM IP PBX Software. DNS Server Configuration Wizard
ScopTEL TM IP PBX Software DNS Server Configuration Wizard Network Module - ifconfig A newly installed server uses DHCP to get an IP address from a DHCP server on the network so make sure the eth0 interface
More informationShipStation Connect. Which scenario works for you?
ShipStation Connect Which scenario works for you? ShipStation Connect. what is it? ShipStation Connect is an application that is installed on the computer with the Printers and/or Scales directly connected
More informationMAC Address Filtering Setup (3G18Wn)
MAC Address Filtering Setup (3G18Wn) MAC Address Filtering MAC address filtering refers to the process of allowing (or denying) access to your wireless network based on the hardware address of the device
More informationInstalling a Star TSP100Lan Printer on Windows OS using futureprnt v5.0 to v6.0
Installing a Star TSP100Lan Printer on Windows OS using futureprnt v5.0 to v6.0 Introduction Number: 280 This application note shows how to install a Star TSP100LAN Ethernet Printer on Windows OS using
More informationSoftware Manual. for Mac OS X. Supported Models. TSP100 Series TSP650 Series TSP650II Series TSP700II Series TSP800II Series TSP1000 Series. Rev. 5.
Software Manual for Mac OS X Supported Models 100 Series 650 Series 650II Series 700II Series 800II Series 1000 Series Rev. 5.0 Notice: Mac, MacOS, MacBook, imac are trademarks of Apple Inc., registered
More informationComputer Networks Lab
Computer Networks Lab Room: BB 219 Additional Information: http://ti.uni-due.de/ti/en/education/teaching/ss18/netlab 1. Practical Training: Network planning and installation of a file server 2. Practical
More informationQuick Network Setup Guide
Quick Network Setup Guide WorkCentre M123/M128 WorkCentre Pro 123/128 701P42078 2004. All rights reserved. Copyright protection claimed includes all forms and matters of copyrighted material and information
More informationEnabling and Using EtherTalk for Mac OS 9.x. If you use EtherTalk, Macintosh computers do not require IP addresses.
Macintosh This topic includes: "Requirements" on page 3-29 "Quick CD-ROM Install Steps" on page 3-29 "Enabling and Using EtherTalk for Mac OS 9.x" on page 3-29 "Enabling and Using TCP/IP for Mac OS 9.x"
More informationPlease take the time now to check the contents of your package: HPS12U Print Server One CD-ROM Quick Installation Guide One power adapter
Congratulations on purchasing Hawking s HPS12U 1-Port Parallel + 2 USB Ports 10/100M Internet Print Server. The Hawking HPS12U is a powerful and convenient network printing solution that will connect your
More informationLongshine Technologie Europe GmbH
Longshine Technologie Europe GmbH www.longshine.de TABLE OF CONTENTS COPYRIGHT...2 1. INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION...3 2. MFP SERVER INSTALLATION...5
More informationInstalling MySQL Subscriber Database
CHAPTER 2 This chapter describes how the optional MySQL subscriber database is installed for use with the Cisco SIP Proxy Server. An installation script, install_mysql_db, is used. This script only runs
More informationPort Forwarding Setup (RTA1025W Rev2)
Port Forwarding Setup (RTA1025W Rev2) Port Forwarding Port forwarding enables programs or devices running on your LAN to communicate with the internet as if they were directly connected. This is most commonly
More informationSAM4S Receipt Printer JPOS Driver. Mac OS X Installation Manual
SAM4S Receipt Printer JPOS Driver Mac OS X Contents Table of Contents Table of Contents... 2 1. Introduction... 3 2. Overview... 3 3. Prerequisite... 3 4. Extracting files using GUI... 6 5. Installation
More informationLab - Configure Wireless Router in Windows
Introduction In this lab, you will configure and test the wireless settings on a wireless router. Recommended Equipment A computer with Windows installed A Wireless NIC installed An Ethernet NIC installed
More informationLevelOne FPS-9021/FPS User Manual. Mini Printer Server w/parallel (USB2.0) Port V
LevelOne FPS-9021/FPS-9022 Mini Printer Server w/parallel (USB2.0) Port User Manual V1.0.0-0601 CONTENTS 1. INTRODUCTION...1 1.1 Product Introduction... 2 1.2 Product Package... 3 1.3 Network Printing
More informationLaser Beam Printer. Network Guide. IMPORTANT: Read this manual carefully before using your printer. Save this manual for future reference.
Laser Beam Printer Network Guide IMPORTANT: Read this manual carefully before using your printer. Save this manual for future reference. ENG Network Guide How This Manual Is Organized Chapter 1 Before
More informationUSB 2.0 Print Server. User s Manual. Rev. 01 (Jan, 2004) Made In Taiwan
USB 2.0 Print Server User s Manual Rev. 01 (Jan, 2004) Made In Taiwan TABLE OF CONTENTS ABOUT THIS GUIDE... 4 INTRODUCTION... 5 PACKAGE CONTENTS... 6 SYSTEM REQUIREMENTS... 6 GENERAL FEATURES... 7 PRODUCT
More informationSoftware Manual. for Mac OS X. Supported Models. TUP900 Series TUP500 Series. Rev. 1.0
Software Manual for Mac OS X Supported Models TUP900 Series TUP500 Series Rev. 1.0 The company names and product names that appear in this manual are generally trademarks or registered trademarks of each
More informationMP01 Quick Start Guide
MP01 Quick Start Guide Version: V2.0 2011-10-12 Table of Contents MP01 QUICK START GUIDE... 2 1. USE MP01 TO SET UP A WIFI TELEPHONY NETWORK AND MAKE INTERNAL PHONE CALLS... 2 1.1 STEP 1-LOGIN TO THE MP01
More informationSoftware Manual. for Mac OS X. Supported Models. TSP100 Series TSP650 Series TSP650II Series TSP700II Series TSP800II Series TSP1000 Series. Rev. 6.
Software Manual for Mac OS X Supported Models TSP100 Series TSP650 Series TSP650II Series TSP700II Series TSP800II Series TSP1000 Series Rev. 6.1 Notice: Bluetooth wordmark and logo are registered trademarks
More information802.11g Wireless LAN MFP Server
802.11g Wireless LAN MFP Server Quick Installation Guide Version: 1.0 (Jun. 2009) 1. Product Introduction Thank you for purchasing and using our 802.11g Wireless LAN MFP server. This MFP server allows
More informationPrint Server. User s Manual
Print Server User s Manual 1 Contents 1. INTRODUCTION...1 1.1 Product Introduction... 2 1.2 Product Package... 3 1.3 Network Printing Architecture... 4 1.3.1 Print Server Network Functions... 5 1.3.2 Network
More informationLAN IP Setup Quick Start Guide
Introduction Follow this document to configure WattBox IP device web interface access using the WattBox-IP Utility. This may be completed in addition to OvrC setup for access to all of the settings in
More informationEthernet (CAT5 UTP/Straight-Through) Cable. 5V DC Power Adapter
1 This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. Before You Begin Check Your Package Contents DI-824VUP+ 2.4GHz Wireless VPN Router and
More informationCCNA Discovery Server Live CD v2.0
CCNA Discovery Overview CCNA Discovery Server Live CD v2.0 Information and Installation Instructions The Discovery Server Live CD provides all of the network services necessary to support the CCNA Discovery
More informationIntegration of the DR 3900 into a Wireless Local Area Network (WLAN)
Integration of the DR 3900 into a Wireless Local Area Network (WLAN) 1. Connect a WLAN-USB stick to the DR 3900. 2. Setup network computer (target system) as described below. 3. Setup DR 3900 as described
More informationQUICK INSTALLATION GUIDE
QUICK INSTALLATION GUIDE Cable/DSL Router Model: BEFSR41, BEFSR81, BEFSX41, BEFVP41 (EU/LA) Package Contents Cable/DSL Router Documentation CD-ROM Power Adapter Network Cable Quick Installation Guide 1
More informationNVR CH Network Video Recorder. Quick Installation Guide v1.0
NVR-0104 4-CH Network Video Recorder Quick Installation Guide v1.0 2 NVR-0104 Quick Installation Guide Package Contents NVR-0104 Network Video Recorder IR Remote controller RJ-45 Ethernet LAN cable Power
More informationECDS MDE 100XVB Installation Guide on ISR G2 UCS-E and VMWare vsphere Hypervisor (ESXi)
ECDS MDE 100XVB Installation Guide on ISR G2 UCS-E and VMWare vsphere Hypervisor (ESXi) Revised: November, 2013 Contents Overview, page 1 Guidelines and Limitations, page 1 Prerequisites, page 2 Installation
More informationInstalling a USB or Ethernet TSP800Rx on Windows 7 / Vista / XP
Installing a USB or Ethernet TSP800Rx on Windows 7 / Vista / XP Introduction This application note will explains how to install a TSP800IIRx printer with a USB or Ethernet interface. The Secured TSP800Rx
More informationCreated March Double click the Office Manager icon on the desktop to launch the back office application.
Created March 2009 This application note shows how to set up Star Micronics printers for guest check and kitchen ticket printing from Inborne Technology s Point of Success Premium and Standard Software.
More informationPL-2303 USB-to-Serial Bridge Controller Mac OS X Universal Binary Driver Installation Guide
PL-2303 USB-to-Serial Bridge Controller Mac OS X Universal Binary Driver Installation Guide Introduction This installation guide document shows the procedure for installing the MacOS X driver for Prolific
More informationinstall the CAB file, but that should still not take but another minute to do 3. Plug the TP4000 back in and test print.
THERMAL PRINTERS TROUBLESHOOTING INSTALLED PRINTERS Before running any additional steps, first try unplugging the USB cable that connects the printer from the Terminal (not the printer), cycling the Power
More informationULTEO OPEN VIRTUAL DESKTOP DEBIAN WHEEZY (7.0) SUPPORT
ULTEO OPEN VIRTUAL DESKTOP V4.0.2 DEBIAN WHEEZY (7.0) SUPPORT Contents 1 Prerequisites: Debian Wheezy (7.0) 3 1.1 System Requirements.............................. 3 2 Repository 4 2.1 Online Method..................................
More informationInstalling LAMP on Ubuntu and (Lucid Lynx, Maverick Meerkat)
Installing LAMP on Ubuntu 10.04 and 10.10 (Lucid Lynx, Maverick Meerkat) April 29, 2010 by Linerd If you're developing websites, it's nice to be able to test your code in the privacy of your own computer
More informationC75/J75 Simple Image Quality Adjustment (SIQA) v2.0 Software Installation Instructions
C75/J75 Simple Image Quality Adjustment (SIQA) v2.0 Software Installation Instructions Introduction This document support the install of the software for using the new application, called SIQA (Simple
More informationPROCEDURE FOR UPDATING TM-T88VI FIRMWARE TO v40.02
PROCEDURE FOR UPDATING TM-T88VI FIRMWARE TO v40.02 REASON FOR THIS UPDATE Epson has learned of a firmware vulnerability (CVE-2017-6443) impacting certain Epson Ethernet and wireless POS products, including
More informationNote For more information, go to to view Document # 2562.
Macintosh This topic includes: "Requirements" on page 3-32 "Enabling and Using EtherTalk" on page 3-32 "Enabling and Using TCP/IP" on page 3-33 "Quick Install Steps for Mac OS 9.x" on page 3-33 "Quick
More informationLevelOne Broadband Routers
LevelOne Broadband Routers FBR-1100TX FBR-1400TX FBR-1401TX FBR-1700TX User's Guide TABLE OF CONTENTS CHAPTER 1 INTRODUCTION... 1 Features of your LevelOne Broadband Router... 1 Package Contents... 4
More informationWindows NT 4.x. Preliminary Steps. Quick CD-ROM Install Steps. Phaser 6250 Color Laser Printer
Windows NT 4.x This topic includes: "Preliminary Steps" on page 3-21 "Quick CD-ROM Install Steps" on page 3-21 "Other Methods of Installation" on page 3-22 "Windows NT 4.x Troubleshooting (TCP/IP)" on
More informationDP-301P+ D-Link Fast Ethernet Print Server
This product can be setup using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 7.0 DP-301P+ D-Link Fast Ethernet Print Server Before You Begin You will need an Ethernet-enabled
More informationSoftware Manual. for Mac OS X. Supported Models. SP500 Series SP700 Series. Rev. 1.1
Software Manual for Mac OS X Supported Models SP500 Series SP700 Series Rev. 1.1 The company names and product names that appear in this manual are generally trademarks or registered trademarks of each
More informationAsus_TFTP_Flash. tftp client is enabled in the default installation of WinXP
For the Asus WL-500 series a few extra steps are available/needed when you do the initial flashing of your Asus WL-500 series router, compared to the general TFTP flash procedure. To avoid confusing the
More informationFast Ethernet Print Server 1 Parallel, 2 USB
Fast Ethernet Print Server 1 Parallel, 2 USB User s Manual Rev. 01 (Nov, 2005) Made In Taiwan TABLE OF CONTENTS ABOUT THIS GUIDE... 4 INTRODUCTION... 5 PACKAGE CONTENTS... 6 SYSTEM REQUIREMENTS... 6 GENERAL
More informationInstalling MediaWiki using VirtualBox
Installing MediaWiki using VirtualBox Install VirtualBox with your package manager or download it from the https://www.virtualbox.org/ website and follow the installation instructions. Load an Image For
More informationMini-102MG ( MFP Server) Quick Installation Guide. User's Manual Version : Mini-102MG_QIG_EU-A_V1
Mini-102MG ( MFP Server) Quick Installation Guide User's Manual Version : Mini-102MG_QIG_EU-A_V1 1. Product Introduction Thank you for purchasing and using our 802.11b/802.11g Wireless LAN MFP server.
More informationPrint Server. Quick Configuration Guide. Network Connectivity for Printers
Print Server Quick Configuration Guide Network Connectivity for Printers 1 Features The DPO NIC enables printers to communicate over an Ethernet network with many different network operating systems, including
More informationPROCEDURE FOR UPDATING TM-T20II FIRMWARE TO v10.10 ESC/POS
PROCEDURE FOR UPDATING TM-T20II FIRMWARE TO v10.10 ESC/POS REASON FOR THIS UPDATE Epson has learned of a firmware vulnerability (CVE-2017-6443) impacting certain Epson Ethernet and wireless POS products,
More informationRiverbed Technology, Inc. 199 Fremont Street San Francisco, CA Phone Fax
Riverbed Technology, Inc. 199 Fremont Street San Francisco, CA 94105 Phone 415.247.8800 Fax 415.247.8801 www.riverbed.com/cascade Tech Note #065 Product: Shark Version: 3.0 Date: 9/30/11 Configuring the
More informationQUICK START GUIDE. STEP X - Name of Step LES1604A, LES1604A-V, LES1604A-T, LES1604A-R, LES1608A CONSOLE SERVERS
STEP X - Name of Step QUICK START GUIDE LES1604A, LES1604A-V, LES1604A-T, LES1604A-R, LES1608A CONSOLE SERVERS 24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM STEP 1 - Check Kit Contents PACKAGE
More informationCisco Aironet Client Adapter Installation Tips for Windows NT v4.0
Cisco Aironet Client Adapter Installation Tips for Windows NT v4.0 Document ID: 19057 To get Cisco Aironet drivers, firmware and utility software, use this link to the Cisco Wireless Software Center. Contents
More informationUser Guide NAS 3.0 Adapter (NAS30U2)
T E C H N O L O G I E S User Guide NAS 3.0 Adapter (NAS30U2) www.addonics.com v5.1.11 Technical Support If you need any assistance to get your unit functioning properly, please have your product information
More informationIP Office 403 and SG VPN Application Note September
IP Office 403 and SG VPN Application Note September 22 2004 Table of Contents 1. Introduction... 3 2. Requirements... 3 3. Network Diagram... 3 4. SG installation... 4 5. Central Site Configuration...
More informationConfiguring the 20xx Inbuilt Ethernet Device.
Configuring the 20xx Inbuilt Ethernet Device. V1.1-1 - Contents Configuring the 20xx Inbuilt Ethernet Device.... 1 Contents... 2 Overview... 3 Prerequisites... 3 Setting the 20xx Loggers IP Address....
More informationDownloaded from manuals search engine
Table of Contents CHAPTER 1 INTRODUCTION... 1 Broadband Router Features... 1 Package Contents... 3 Physical Details... 4 CHAPTER 2 INSTALLATION... 6 Requirements... 6 Procedure... 6 CHAPTER 3 SETUP...
More informationAddonics T E C H N O L O G I E S. mini NAS. Model: NAS25HDU Key Features
1.0 Key Features Addonics T E C H N O L O G I E S mini NAS Model: NAS25HDU2 Convert any 2.5 SATA drive into a Network Attached Storage device Connect a USB printer to share it over the network One Fast
More informationCOMPUPRINT SP40. Ethernet 10/100Base-T Connection Installation Guide
COMPUPRINT SP40 Ethernet 10/100Base-T Connection Visit th e web site http://www.compuprint.com for th e lates t information,drivers and firmware. 2 A78410014-004 Table of Contents Important - READ ME First...
More informationEEG ComCC 1250m Modem Data Multiplexer
EEG ComCC 1250m Modem Data Multiplexer Product Manual EEG Enterprises, Inc. 586 Main Street Farmingdale, New York 11735 TEL: (516) 293-7472 FAX: (516) 293-7417 Copyright EEG Enterprises, Inc. 2010 All
More informationC5150n, C5200ne & C5200n Computer Connections & Software Install Guide
C5150n, C5200ne & C5200n Computer Connections & Software Install Guide Installation Overview: Windows Windows TCP/IP Network Installation: C5150n & C5200ne Ethernet Connection... 2 Software... 3 Windows
More informationSETTING UP NETWORKING FOR LOOKOUT 4.0
NOTE TO USER SETTING UP NETWORKING FOR LOOKOUT 4.0 Contents Testing TCP/IP Capability The purpose of this document is to help you with basic configuration of your computers in order to run Lookout 4. This
More informationP-201/ P-201U Wired Printer Server
P-201/ P-201U Wired Printer Server User s Manual COPYRIGHT Copyright 2006/2007 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a
More informationDeploy a Customer Site
Local Administration, on page 1 Run Port Check Tool, on page 4, on page 4 Add Cisco Wireless IP Phone 8821 to the Wireless LAN, on page 6 Provision the Phone, on page 7 Local Administration You can connect
More informationClient Configuration Guide
Email Client Configuration Guide Contents Prerequisites... 1 Microsoft Outlook 2007... 2 Microsoft Outlook 2002/XP and 2003... 7 Microsoft Windows Mail (available with Vista only)... 11 Microsoft Outlook
More informationCONFIGURING ROUTERS 1
CONFIGURING ROUTERS 1 Web location for this presentation: http://aztcs.org Click on Meeting Notes 2 SUMMARY Most modern home routers will have an initial default configuration that will work with your
More informationConnecting Print Partner V series to Windows NT 4.0 using an Axis Token Ring Box.
Connecting Print Partner V series to Windows NT 4.0 using an Axis Token Ring Box. Introduction This document describes how to use Windows NT Workstation or Server 4.0 as a print server for Fujitsu s Print
More informationInstallation Guide. Installation Instructions for Models: DI-148 Series DI-158 Series DI-710 Series DI-715B Series DI-718B(x) Series.
Installation Guide Installation Instructions for Models: DI-148 Series DI-158 Series DI-710 Series DI-715B Series DI-718B(x) Series Revision G M-101030 Hardware and Software Installation Guide DI-148,
More information