WiFi to Serial Module Command set

Size: px

Start display at page:

Download "WiFi to Serial Module Command set"

Grant Underwood
6 years ago
Views:

1 WiFi to Serial Module Command set Rev /07/11 Revision Date Description /07/11 Initial release. History

2 1. RS232 Commands table ITEM FUNCTION COMMAND PAGE 1 To change data mode to command mode To change command mode to data mode exit 5 3 System restart reboot 8 4 New password passwd 8 5 New username username 8 6 IP address information inquiry ipconfig 9 7 System parameter save saveconfig 9 8 Software reboot software-reset 9 9 configuation information emconfig 9 10 Wifi connection status connstatus Inquiry an IP network ping Wireless site survey in infrastructure mode sisrvy Interconnect Wireless network jbss WiFi allocation information wificonfig Easy configuration module ezconfig MAC address information station Static IP address of device server in Server mode set ip Subnet mask of device server set mask Gateway IP address of device server set gateway DNS server IP address of device server set dns UART serialport parameter setting set serialport Server/Client setting set mode 13 Page 2

3 ITEM FUNCATION COMMAND PAGE 23 Local server port setting set srvport Destination port setting set dstport DHCP enable/disable set dhcpclient Communication protocol set connectype Time interval to send out serial data packet set transmitimer Accessible IP Addresses Configuration Parameters set accessip Accessible IP Mode: Enable set accip Current server address: XXX.com.tw set ems Current from address set emf Current to1 address set emt Current to2 address set emt Current to3 address set emt Auto Warning Settings set aw RS485 mode set set rs Assign host IP address set dsthn Firmware upgrade server address set tftpsrv Firmware upgrade file name set filename Display Debug Message set dbgmsg Transmit management data via broadcast/multicast packet set bmcast Service Set Identifier set ssid Ad-hoc / Infrastructurt mode setting set nt Channel setting set ch If WEP encryption is selected, this selects the key length, either WEP-64 or WEP-128 to be used. set wepklen Wireless network Encryption set w64k Wireless network Encryption set w128k 21 Page 3

4 48 WEP Key Index set wki AES/TKIP key value set wp The WiFi data can be encrypted with option of open system, WEP 64/128, TKIP and AES. set et Preamble will be either Long Preamble, or Auto set pmb Transmission Power Level set tpl Transmission data rate of WiFi connection set dr Enable/disable Auto Power Control set apc Periodic time to send Beacon in ms, if in Ad-Hoc mode set bi Protection frame type will be either RTS or Self-CTS set pft Key auto code setting set keyauto DHCP server setting set dhcpsrv DHCP server enable set dhcpsrvenable 24 Page 4

5 2. RS232 interface 2-1. Start interface in data mode When turn on system you will see Welcome! RS232 to WiFi interface. It is in data transfer mode now! As below 2-2 Command mode If you would like change to command mode please keyin +++ directly, then hit Enter key. The default setting of username and password are same as admin. It is in command now! As below. 2-3 Exit command mode If you would like back to data transfer mode please keyin exit directly, then hit Enter key. It back to data transfer now! As below. Page 5

2-4 RS-232 WIFI MODULE COMMAND include two kind of set 2-4-1 General command set as

These commands are all involved 17 commands in the group figure 2-4.

6 2-4 RS-232 WIFI MODULE COMMAND include two kind of set General command set as follow : Keyin help, then hit Enter key. These commands are all involved 17 commands in the group figure 2-4.a Set and Get command as follow : Keyin sethelp, then hit Enter key. These commands are all involved 44 commands in the group. figure 2-4.b Page 6

7 figure 2-4.c figure 2-4.d Page 7

8 figure 2-4.e 2-5 Command detail description reboot System restart. Not to change any parameter you set passwd Use this command to modify your personal password for security username Use this command to modify your personal username for security. Page 8

2-5-4 ipconfig 2-5-5 saveconfig system parameter save.

configuration for next boot. You can set all what you need and save them together.

9 2-5-4 ipconfig saveconfig system parameter save. It is important after you do set command to save system parameter, it is regarding system configuration for next boot. You can set all what you need and save them together. The example as below software-reset System parameter change to default emconfig configuration information Page 9

2-5-8 connstatus Wifi connection status 2-5-9 ping Inquiry

2-5-10 sisrvy Check Wireless network 2-5-11 jbss Interconnect

10 2-5-8 connstatus Wifi connection status ping Inquiry whether a particular host is reachable across an IP network sisrvy Check Wireless network jbss Interconnect Wireless network Ex : jbss link to INDEX 00 for SSID Richu. Page 10

11 Wificonfig WiFi allocation information Page 11

12 ezconfig WiFi to Serial gateway command set Station MAC address information set ip, get ip Static IP address setting, please refer to page 6 ~8. set ip <ip addr> set mask, get mask Subnet mask setting set gateway, get gateway Gateway setting Page 12

13 set dns, get dns DNS setting Error command format, please refer to page set serialport, get serialport UART serialport parameter setting,, please refer to page 6 command format, please refer to page 6 ~ set mode, get mode Server/Client setting Page 13

14 set srvport, get srvport Local server port setting set dstport, get dstport Destination port setting set dhcpclient, get dhcpclient DHCP enable/disable Page 14

15 set connectype, get connectype Communication protocol set transmitimer, get transmitimer Transmitter timer setting set accessip, get accessip Accessible IP List Page 15

16 Error command format, please refer to page set accip, get accip Accessible IP Mode: Enable set ems, get ems Current server address: XXX.com.tw set emf, get emf Current from address Page 16

2-5-30 set emt1, get emt1 set emt2, get emt2 set emt3, get emt3 Current e-mail to1 address 2-5-31 set

17 set emt1, get emt1 set emt2, get emt2 set emt3, get emt3 Current to1 address set aw, get aw Auto Warning Settings Error command format set rs485, get rs485 RS485 mode set Page 17

2-5-33 set dsthn, get dsthn Assign host IP address 2-5-34 set tftpsrv, get tftpsrv Firmware upgrade server address

18 set dsthn, get dsthn Assign host IP address set tftpsrv, get tftpsrv Firmware upgrade server address set filename, get filename Firmware upgrade file name set dbgmsg, get dbgmsg Display Debug Message Page 18

19 set bmcast, get bmcast Bcast/Mcast ON/OFF set ssid, get ssid SSID setting set nt, get nt Ad-hoc / Infrastructurt mode setting Page 19

20 set ch, get ch Channel setting set wepklen, get wepklen Wireless network Encryption set w64k, get w64k Wireless network Encryption Page 20

21 set w128k, get w128k Wireless network Encryption set wki, get wki WEP Key Index set wp, get wp Wireless network Encryption cipher set et, get et Encryption type Page 21

22 set pmb, get pmb Long Preamble set tpl, get tpl Power level percentage Error command format set dr, get dr Data rate setting Error command format set apc, get apc Auto power control ON/OFF Page 22

23 set bi, get bi Beacon interval setting in mini second set pft, get pft Protection frame type set keyauto, get keyauto set dhcpsrv, get dhcpsrv DHCP server setting Page 23

24 The DHCP Server Setting tab provides following parameters: Field Description Start IP Address End IP Address Netmask Gateway Lease Time The start IP address to offer to DHCP client. The end IP address to offer to DHCP client. The subnet mask to offer to DHCP client. The default gateway to offer to DHCP client. The time period that the offered IP address is valid set dhcpsrvenable, get dhcpsrvenable DHCP server enable Page 24

WiFi A/V Module. (Model: WM-CAM)

WiFi A/V Module. (Model: WM-CAM) WiFi A/V Module (Model: WM-CAM) A/V module: Array size: 1200x1600 (UXGA) Optical format: 1/4 Image transfer rate: UXGA/SXGA @15fps; SVGA@30fps; CIF@60fps WM-module embedded a Single Chip Micro-controller