Lab - Share a Printer in Windows 7 and Vista
|
|
- Marybeth Brown
- 6 years ago
- Views:
Transcription
1 Introduction In this lab, you will share a printer, configure the printer on a networked computer, and print a test page from the remote computer. Recommended Equipment Two computers directly connected or connected through a switch Windows 7 or Vista installed on both computers A printer installed on one of the computers Part 1: Windows 7 Step 1: Share the printer. a. Log on to the computer that has the printer connected. To access the folder options, click Control Panel > Folder Options. In the View tab, deselect Use Sharing Wizard (Recommended). Click OK to continue Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 12
2 b. Click Control Panel > Network and Sharing Center > Change advanced sharing settings on the left side panel. c. In the Change sharing options for different network profiles screen, scroll down to Password protected sharing for the current profile. Select Turn off password protected sharing and click Save changes. d. Click Control Panel > Devices and Printers. e. Right-click the printer > Printer properties. f. In the Sharing tab, select Share this printer. Name the new share All-in-One Printer and click OK. Step 2: Add a shared printer. a. Log on to the computer that does not have the printer connected. b. Click Control Panel > Devices and Printers Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 12
3 c. In the Devices and Printers window, click Add a printer. d. Click Add a network, wireless or Bluetooth printer Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 12
4 e. The Searching for available Printers screen appears. When all printers are discovered, select Printer name on ComputerName in the Select a printer screen and click Next. f. To find a printer by name or TCP/IP address, select The printer that I want isn t listed Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 4 of 12
5 g. Click Select a shared printer by name and type \\computername\printer, where computername is the name of the computer with the connected printer and printer is the name of the printer. Click Next. h. If prompted to install drivers, click Install driver Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 5 of 12
6 i. When the You ve successfully added a printer screen appears, click Next and Finish to close the Add Printer window. Step 3: Print a test page. a. In the Devices and Printers window, right-click the printer > Printer properties. b. In the General tab, click Print Test Page to verify that the printer is working properly Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 6 of 12
7 Part 2: Windows Vista Step 1: Share the printer. a. Log on to the computer that has the printer connected. To access the folder options, click Control Panel > Folder Options. In the View tab, deselect Use Sharing Wizard (Recommended) and click OK to continue. b. Click Control Panel > Network and Sharing Center > Password protected sharing. Select Turn off password protected sharing and click Apply Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 7 of 12
8 c. Click Control Panel > Printers. Right-click the printer > Properties. d. In the Sharing tab, click Change sharing options. e. Select Share this printer. Name the new share Example and click OK Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 8 of 12
9 Step 2: Add a shared printer. a. Log on to the computer that has no printer connected, and click Control Panel > Printers. Click Add a printer. b. In the Add Printer screen, click Add a network, wireless or Bluetooth printer Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 9 of 12
10 c. When all printers are discovered, the Select a printer screen opens. If the desired printer is displayed in the search list, select Printer on Computername and click Next. Or to find a printer by name or TCP/IP address, select The printer that I want isn t listed Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 10 of 12
11 Select the radio button Select a shared printer by name and type \\computername\printer, where computername is the name of the computer with the connected printer and printer is the name of the printer. Click Next. d. If prompted to install drivers click Install driver. e. Accept all default settings, click Next and then click Finish. Step 3: Print a test page. a. Click Control Panel > double-click Printers Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 11 of 12
12 b. Right-click the printer > Properties and click Print Test Page Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 12 of 12
Lab - Manage Virtual Memory in Windows 7 and Vista
Lab - Manage Virtual Memory in Windows 7 and Vista Introduction In this lab, you will customize virtual memory settings. Recommended Equipment A computer with Windows 7 or Vista installed The hard drive
More informationLab - System Restore in Windows 7 and Vista
Lab - System Restore in Windows 7 and Vista Introduction In this lab, you will create a restore point and then use it to restore your computer. Recommended Equipment A computer running Windows 7 or Vista
More informationLab - Configure the Firewall in Windows 8
Introduction In this lab, you will explore the Windows Firewall and configure some advanced settings. Recommended Equipment Two computers directly connected or connected over the network Windows 8 installed
More informationLab - Configure the Firewall in Windows 7 and Vista
Introduction In this lab, you will explore the Windows Firewall and configure some advanced settings. Recommended Equipment Two computers directly connected or connected on a network Windows installed
More informationHow to set up a Default Printer
How to set up a Default Printer 1. Click on the Start Menu 2. Select the Devices and Printers icon Start menu window 3. The Devices and Printers window will show you all the installed printers you have
More informationLab - Share Resources in Windows
Introduction In this lab, you will create and share a folder, set permissions for the shares, create a Homegroup and a Workgroup to share resources, and map a network drive. Due to Windows Vista lack of
More informationLab - Create a Partition in Windows 8
Lab - Create a Partition in Windows 8 Introduction In this lab, you will create a FAT32 formatted partition on a disk. You will convert the partition to NTFS. You will then identify the differences between
More informationLab - Connect to a Router for the First Time
Introduction In this lab, you will configure basic settings on a wireless router. Recommended Equipment A computer with Windows installed An Ethernet NIC installed Wireless router Ethernet patch cable
More informationLab - Create User Accounts in Windows 8
Introduction In this lab, you will create user accounts in Windows 8. Recommended Equipment The following equipment is required for this exercise: A computer with a new installation of Windows 8 Part 1:
More informationLab - Task Scheduler in Windows 7 and Vista
Lab - Task Scheduler in Windows 7 and Vista Introduction In this lab, you will schedule a task using the Windows 7 Task Scheduler utility. You will then make changes to your task and test your task by
More informationLab - Remote Assistance in Windows
Lab - Remote Assistance in Windows Introduction In this lab, you will remotely connect to a computer, examine device drivers, and provide remote assistance. Recommended Equipment Two Windows 7, Windows
More informationLab - Data Migration in Windows
Lab - Data Migration in Windows Introduction When a new computer is purchased or a new operating system is installed, it is often desirable to migrate a user s data to the new computer or OS. Windows has
More informationLab - Remote Desktop in Windows 7 and Vista
Lab - Remote Desktop in Windows 7 and Vista Introduction In this lab, you will remotely connect to another Windows 7 or Vista computer. Recommended Equipment The following equipment is required for this
More informationWireless PC Network Settings
APPENDIX C This appendix provides instructions for changing the TCP/IP and radio card settings in your wireless PC. Choose the instructions appropriate for your operating system. Here is what you will
More informationLab - Task Manager in Windows 7 and Vista
Lab - Task Manager in Windows 7 and Vista Introduction In this lab, you will explore Task Manager and manage processes from within Task Manager. Recommended Equipment The following equipment is required
More informationOutlook 2010 Exchange Setup Guide
Outlook 2010 Outlook Profile Configuration This section provides a quick overview of the settings needed to access Outlook client software and configure Outlook to connect to your hosted Exchange mailbox.
More informationLab - Configure Data Backup and Recovery in Windows 7 and Vista
Lab - Configure Data Backup and Recovery in Windows 7 and Vista Introduction In this lab, you will back up data. You will also perform a recovery of the data. Recommended Equipment A computer with Windows
More information8.9.2 Lab: Configure an Ethernet NIC to use DHCP in Windows Vista
8.9.2 Lab: Configure an Ethernet NIC to use DHCP in Windows Vista Introduction If Vista is not available in your classroom, you may complete this lab by viewing the figures in this document. Print and
More informationLab - Monitor and Manage System Resources in Windows 7 and Vista
Lab - Monitor and Manage System Resources in Windows 7 and Vista Introduction In this lab, you will use administrative tools to monitor and manage system resources. Recommended Equipment The following
More informationLab - Task Scheduler in Windows 8
Lab - Task Scheduler in Windows 8 Introduction In this lab, you will schedule a task using the Windows 8 Task Scheduler utility. You will then make changes to your task and test your task by running it.
More informationHyperBlade Bluetooth Serial Port Setup Guide For use with Scimitar Software and USB Bluetooth adapter Hyperdyne Labs 2006
HyperBlade Bluetooth Serial Port Setup Guide For use with Scimitar Software and USB Bluetooth adapter Hyperdyne Labs 2006 INTRODUCTION If you are using our USB Bluetooth adapter, this document will show
More informationIn this lab you will explore the Windows Vista Firewall and configure some advanced settings.
16.3.2 Optional Lab: Configure Windows Vista Firewall Print and complete this lab. In this lab you will explore the Windows Vista Firewall and configure some advanced settings. Recommended Equipment Two
More informationLab - View Wireless and Wired NIC Information
Lab - View Wireless and Wired NIC Information Objectives Part 1: Identify and Work with PC NICs Part 2: Identify and Use the System Tray Network Icons Background / Scenario This lab requires you to determine
More informationHP LaserJet P1102w Configuration
HP LaserJet P1102w Configuration Note: If you have already installed and configured the printer, and set it to use a static IP address on one computer, skip to Install Printer on Second and Subsequent
More informationLab - Task Manager in Windows 8
Lab - Task Manager in Windows 8 Introduction In this lab, you will explore Task Manager and manage processes from within Task Manager. Recommended Equipment The following equipment is required for this
More informationLab IP Addresses and Network Communication
Lab 3.5.2 IP Addresses and Network Communication Objectives Build a simple peer-to-peer network and verify physical connectivity. Assign various IP addresses to hosts and observe the effects on network
More informationStep 1 Turn on the device and log in with the password, PIN, or other passcode, if necessary.
Working with Android Introduction In this lab, you will place apps and widgets on the home screen and move them between different home screens. You will also create folders to which apps will be added
More informationLab - System Restore in Windows 8
Lab - System Restore in Windows 8 Introduction In this lab, you will create a restore point and use it to restore your computer. Recommended Equipment A computer running Windows 8 Step 1: Create a restore
More information1 Introduction. ThinPrint Client Installation Page 1
ThinPrint Client Installation Page 1 1 Introduction In order to reduce the amount of bandwidth used when printing and to improve the overall performance and online experience for the customers that we
More informationLab - Configure Users and Groups in Windows
Lab - Configure Users and Groups in Windows Introduction In this lab, you will create users and groups and delete users using the Local Users and Groups Manager. You will also assign group and user permission
More informationParallel Printers Set-Up
Parallel Printers Set-Up - 25 - Setting up a Local Parallel Printer in Windows 95/98 Left click on the START button. Go to SETTINGS, and then PRINTERS. 1. Locate and double left click on the ADD PRINTER
More information1. Click on the Windows button in the bottom left corner of your screen and select Control Panel.
APNK "WiFi Can I Print" Windows Vista step by step instructions 1. Click on the Windows button in the bottom left corner of your screen and select Control Panel. 2. Hardware and Sound Printer Windows Vista
More informationLab - Remote Desktop in Windows 8
Lab - Remote Desktop in Windows 8 Introduction In this lab, you will remotely connect to another Windows 8 computer. Recommended Equipment The following equipment is required for this exercise: Two Windows
More informationCisco Aironet Client Adapter Installation Tips for Windows NT v4.0
Cisco Aironet Client Adapter Installation Tips for Windows NT v4.0 Document ID: 19057 To get Cisco Aironet drivers, firmware and utility software, use this link to the Cisco Wireless Software Center. Contents
More informationLab: Install a NIC in Windows XP
11.4.1 Lab: Install a NIC in Windows XP Introduction Print and complete this lab. In this lab, you will install a NIC, verify NIC operation, and manually configure an IP address. Recommended Equipment
More informationLab 6-3 Configuring a Wireless Client
Lab 6-3 Configuring a Wireless Client Topology Diagram Scenario Step 1 In this lab, you will install a Cisco Aironet wireless PC card on a laptop. Then you will also configure the Cisco Aironet Desktop
More informationLab - Configure Browser Settings in Windows 8
Introduction In this lab, you will configure browser settings in Microsoft Internet Explorer. Recommended Equipment A computer with Windows 8 An Internet connection Step 1: Set Internet Explorer as the
More informationLAB: Configuring LEAP. Learning Objectives
LAB: Configuring LEAP Learning Objectives Configure Cisco ACS Radius server Configure a WLAN to use the 802.1X security protocol and LEAP Authenticate with an access point using 802.1X security and LEAP
More informationLab - Configure a NIC to Use DHCP in Windows
Introduction In this lab, you will configure an Ethernet NIC to use DHCP to obtain an IP address and test connectivity between two computers. Recommended Equipment Wireless router Two computers running
More informationIntegrated Information Technology Services (IITS)
Integrated Information Technology Services (IITS) User Guide for Laptops with Windows 7 Network Configuration & Software Installation Version 1.4 Updated as at 15-Aug-11 Table of Contents How to verify
More informationHelp Document Series: Connecting to your Exchange mailbox via Outlook from off-campus
Help Document Series: Connecting to your Exchange mailbox via Outlook from off-campus This document will take you through setting up your Clark Exchange mailbox in Outlook 2003 from off-campus. This will
More informationInstalling the Windows Custom PostScript or PCL Printer Driver
Installing the Windows Custom PostScript or PCL Printer Driver This ReadMe file contains the instructions for installing the Custom PostScript or PCL Printer Driver on Windows systems. The Custom PostScript
More informationInstalling Your Printer to Additional Computers on Your Network
Installing Your Printer to Additional Computers on Your Network PIXMA ip8720 Mac OS 1 Installing Your Printer to Additional Computers on Your Network PIXMA ip8720 Mac OS Preparing to Connect My Printer
More informationLab - Configure Wireless Router in Windows
Introduction In this lab, you will configure and test the wireless settings on a wireless router. Recommended Equipment A computer with Windows installed A Wireless NIC installed An Ethernet NIC installed
More informationCash Manager Installation Guide
Cash Manager Installation Guide Contents Minimum Requirements... 3 Supported Operating Systems... 3 Other Requirements... 3 Installation... 4 Configuration Sybiz or Evolution... 7 Configuration Ostendo...
More informationLab: Install a NIC
11.4.1 Lab: Install a NIC Introduction Print and complete this lab. In this lab, you will install a NIC, verify NIC operation, and manually configure an IP address. Recommended Equipment Computer running
More information5.4.8 Optional Lab: Managing System Files with Built-in Utilities in Windows Vista
5.4.8 Optional Lab: Managing System Files with Built-in Utilities in Windows Vista Introduction Print and complete this lab. In this lab, you will use Windows built-in utilities to gather information about
More informationQuickBooks Windows Web Connect
QuickBooks for Windows Conversion Instructions QuickBooks Windows 2010-2013 Web Connect Table of Contents TABLE OF CONTENTS... 2 INTRODUCTION... 3 DOCUMENTATION AND PROCEDURES... 3 Task 1: Conversion Preparation...
More informationLab - Managing System Files in Windows
Introduction In this lab, you will use Windows utilities to gather information about the computer. Recommended Equipment A computer running Windows Step 1: Customize the Start Menu in Windows. a. Log on
More informationDownloading Driver Files
The following instructions are for all DPAS supported Zebra printers except the Zebra GK420t. The ZDesigner R110Xi4 203 dpi driver has been tested and recommended for DPAS use. This driver will support
More informationLab Viewing Wireless and Wired NIC Information
Objectives Part 1: Identify and Work with PC NICs Part 2: Identify and Use the System Tray Network Icons Background / Scenario This lab requires you to determine the availability and status of the network
More informationQuick Start Guide. Microinvest Barcode Printer Pro
Quick Start Guide Microinvest Barcode Printer Pro 2016 Microinvest Barcode Printer Pro provides barcode printing functionality specifically designed to account for new orders and existing entries in the
More informationUser Manual 1-port USB 2.0 Print Server
User Manual 1-port USB 2.0 Print Server GPSU21W6 PART NO. M1210-b 1 www.iogear.com 2 Welcome Thank you for purchasing this 1-port USB 2.0 Print Server that allows any networked computer to share a USB
More informationPrint Server Setup Guide (NF1ADV)
Print Server Setup Guide (NF1ADV) Print Server Setup for the NF1ADV This set of print server setup instructions is intended for use with printers connecting with a USB cable connection being plugged into
More informationClient Configuration Guide
Email Client Configuration Guide Contents Prerequisites... 1 Microsoft Outlook 2007... 2 Microsoft Outlook 2002/XP and 2003... 7 Microsoft Windows Mail (available with Vista only)... 11 Microsoft Outlook
More informationDirect Connect and Dial-Up Connection on Windows 2000 Operating Systems
Application Note Issue Date March 6, 2003 Direct Connect and Dial-Up Connection on Windows 2000 Operating Systems Direct Connect and Dial-Up Connection on Windows 2000 Operating Systems...2 Introduction...
More informationConfiguring the Switch
This appendix contains these topics: Using the Configuration Setup Wizard, page 1 Using the CLI, page 4 Using the Configuration Setup Wizard Quick Setup: Accessing the Configuration Setup Wizard When you
More informationSubject: Color Access Policy Manager. Date: March 2009 OKI DATA TRAINING DEPARTMENT REV Bishops Gate Blvd. Mt.
Subject: Color Access Policy Manager Date: March 2009 OKI DATA TRAINING DEPARTMENT REV. 1.0 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054 Copyright 2009 Oki Data Americas, Inc. All rights reserved Introduction
More informationCREATING CUSTOMER MAILING LABELS
CREATING CUSTOMER MAILING LABELS agrē has a built-in exports to make it easy to create a data file of customer address information, but how do you turn a list of names and addresses into mailing labels?
More informationInstalling ImageTrends EMS Field Bridge
Service Field DELAWARE EMERGENCY MEDICAL REPORTING SYSTEM (DEMRS) DEMRS Bridge Installing ImageTrends EMS Field Bridge Field Bridge Specifications and Licenses Each agency will be issued one EMS Field
More informationWorking with Profiles in Outlook for Macintosh
Working with Profiles in Outlook Introduction When Outlook is installed, a profile is created in order for you to access your Exchange account. If you share a computer, or need to access more than one
More informationLPR for Windows 95/98/Me/2000 TCP/IP Printing User s Guide
LPR for Windows 95/98/Me/2000 TCP/IP Printing User s Guide Rev. 02 (August, 2001) Copyright Statement Trademarks Copyright 1997 No part of this publication may be reproduced in any form or by any means
More informationInstalling FileMaker Pro 11 in Windows
Installing FileMaker Pro 11 in Windows Before you begin the installation process, please exit other open programs and save your work. Installation notes Before you install FileMaker Pro, review the following
More informationManage External Devices
How-to Guide CounterACT Version 7.0.0 Table of Contents About Managing External Devices... 3 Prerequisites... 3 Create and Apply an External Device Classification Policy... 4 Evaluate External Device Information...
More informationLab - Install Windows 7 or Vista
Introduction In this lab, you will install the Windows 7 or Vista operating system. Recommended Equipment A computer with a blank hard disk drive Windows 7 or Vista installation DVD or USB flash drive
More informationLab: Install a Wireless NIC in Windows XP
15.5.1 Lab: Install a Wireless NIC in Windows XP Introduction Print and complete this lab. In this lab, you will install and configure a wireless NIC. Recommended Equipment A computer with Windows XP installed
More informationXerox WorkCentre 6655 Software Installation Instructions
Xerox WorkCentre 6655 Software Installation Instructions Upgrading Software for Xerox ConnectKey Technology A new firmware update containing the latest improvements is available for your ConnectKey-enabled
More informationDEPOSITPARTNER INSTALLATION GUIDE Desktop Application
DEPOSITPARTNER INSTALLATION GUIDE Desktop Application SCANNER DRIVER INSTALLATION NOTE: In order for the scanner to work properly, the scanner drivers must be installed before downloading the DepositPartner
More informationDongle-sized Wireless Print Server. Quick Installation Guide V1.0
Dongle-sized Wireless Print Server Quick Installation Guide V1.0 1 Before you start, you should prepare the following items: Windows-based computer with print server setup CD Printer Printer cable One
More informationMicrosoft Word - Starting the Mail Merge Wizard
Microsoft Word - Starting the Mail Merge Wizard Starting the Mail Merge Wizard. 1. Select the Mailings tab. 2. Click the Start Mail Merge button 3. Select Step by step Mil Merge Wizard. 4. Select the type
More informationDownloading Driver Files
The following instructions are for all DPAS supported Intermec printers. The Intermec InterDriver EasyCoder PD42 (203 dpi) - IPL driver has been tested and recommended for DPAS use. This driver will support
More informationOptional Lab: Install a Wireless NIC in Windows Vista
15.5.1 Optional Lab: Install a Wireless NIC in Windows Vista Introduction Print and complete this lab. In this lab, you will install and configure a wireless NIC. Recommended Equipment A computer with
More informationMail Merge. To Use Mail Merge: Selecting Step by Step Mail Merge Wizard. Step 1:
Mail Merge When you are performing a Mail Merge, you will need a Word document (you can start with an existing one or create a new one), and a recipient list, which is typically an Excel workbook. Watch
More informationInstructions for connecting to the FDIBA Wireless Network (Windows Vista)
Instructions for connecting to the FDIBA Wireless Network (Windows Vista) In order to connect, you need your username and password, as well as the FDIBA Root Certificate which you need to install on your
More informationQuickBooks Windows Web Connect to Direct Connect
QuickBooks for Windows Conversion Instructions QuickBooks Windows 2010-2013 Web Connect to Direct Connect Table of Contents TABLE OF CONTENTS... 2 INTRODUCTION... 3 DOCUMENTATION & PROCEDURES... 3 Task
More informationLab - Working with ios
Lab - Working with ios Introduction In this lab, you will place apps on the home screen and move them between different home screens. You will also create folders. Finally, you will install on the ios
More informationWindows 7 Professional 64 bit Configuration for MassLynx Security
Windows 7 Professional 64 bit Configuration for MassLynx Security 1. Purpose This document outlines the procedure to configure Microsoft Windows 7 Professional 64 bit operating system in order for installations
More informationTransferring Questions from GeorgiaVIEW Vista to Desire2Learn using Respondus
Transferring Questions from GeorgiaVIEW Vista to Desire2Learn using Respondus The following explains how to retrieve questions from GeorgiaVIEW Vista using Respondus. 1. From the Start tab in Respondus,
More information5.5.3 Lab: Managing Administrative Settings and Snap-ins in Windows XP
5.5.3 Lab: Managing Administrative Settings and Snap-ins in Windows XP Introduction Print and complete this lab. In this lab, you will use administrative tools to monitor system resources. You will also
More informationLab: Configure Wireless Security
16.3.1 Lab: Configure Wireless Security Introduction Print and complete this lab. In this lab, you will configure and test the wireless settings on the Linksys WRT300N. Recommended Equipment Two computers
More informationNetwork Media. File sharing guide
Network Media File sharing guide Table of contents Table of contents... 2 Introduction... 2 Create a UPnP server in Windows Vista... 3 Create a UPnP server in Windows 7... 4 Share files and folders in
More informationTroubleshooting 1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu does not appear automatically. What should
Troubleshooting 1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu does not appear automatically. What should I do? 1. For Windows 2000/2003 Server/XP, if the window
More informationLab - Working with Android
Introduction In this lab, you will place apps and widgets on the home screen and move them between different screens. You will also create folders. Finally, you will install and uninstall apps from the
More informationBluetooth Micro Dongle User s Guide. Rating: 5V DC 80mA Made in China
Bluetooth Micro Dongle User s Guide Rating: 5V DC 80mA Made in China Introduction Package Contents USB Bluetooth adapter x 1 Installation CD x 1 (includes Bluetooth software and User s Guide) User s Guide
More informationSetting up Outlook Express to access your boxes
Setting up Outlook Express to access your email boxes Basically there are 2 stages to this process the third only necessary if you use BT Internet as your Internet Service Provider (ISP) 1) Setting up
More informationWireless Hotspots Configuring the Laptop for Printing GUIDE. User Services IT Services University of Malta
Wireless Hotspots Configuring the Laptop for Printing GUIDE User Services IT Services University of Malta 2012 User Services IT Services Junior College, University of Malta May only be reproduced with
More informationCreated December 2008
Created December 2008 This application note shows how to configure the TSP100LAN kitchen printer using ASI Restaurant Manager POS Software. ASI Restaurant Manager Version 17.0 (http://www.rmpos.com) Star
More informationOnBase ver Thick Client Installation Instructions. Install Microsoft SQL Server 2012 Native Client
OnBase ver. 14.0 Thick Client Instructions Install Microsoft SQL Server 2012 Native Client 1. Browse to the SQL Server Native Client 11.0 directory and locate and double-click the SQL Server Native Client
More informationPC Agent Quick Start. Opening the Agent. Logging in to the Agent. Connected Backup. Version 8.6. Revision 0
T E C H N I C A L N O T E Version 8.6 PC Agent Quick Start Revision 0 Use this document as a quick reference for common Connected Backup PC Agent tasks. If the Agent is not on your computer, contact your
More informationDCP585CW Windows Network Connection Repair Instructions
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine
More informationSTEP TWO: Configure your network settings (Windows XP and 2000 users start here, Windows 98se / Me start on page 3.)
Hood College Dorm Network Setup Instructions These instructions assume you already have a working computer with a properly installed network interface card (NIC, Ethernet). These instructions are written
More informationCompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology
CompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology Featuring a Socket CompactFlash/SDIO card and Windows CE software for adding Bluetooth capability to the following mobile computers:
More informationAcronis Backup & Recovery 11 Beta Advanced Editions
Acronis Backup & Recovery 11 Beta Advanced Editions Quick Start Guide Table of contents 1 Main components... 3 2 Supported operating systems... 3 3 Where do I install the components?... 3 4 What you need
More informationSoftware Installation Requirements
Application Installation Guide PrintIQ TM Software Installation Requirements Please use the following guide to ensure that you are meeting all requirements prior to installing the PrintIQ TM Data Collector
More informationInterpretype Bluetooth Setup Procedure
This information is for configuring the Interpretype to communicate using the Bluetooth Connectivity Kit. To communicate using LAN or Wi-Fi in the full featured version of our software, please refer to
More informationHow to upgrade firmware in DSL-xxx series router
How to upgrade firmware in DSL-xxx series router WARNING: DO NOT upgrade the firmware through a wireless connection. You may damage the router. Note that you will have to reconfigure the router after upgrading.
More informationConfigure a Mobile Device with Cisco IP Phone 8800 Series Multiplatform Phone
Configure a Mobile Device with Cisco IP Phone 8800 Series Multiplatform Phone Objective The Cisco IP Phone 8800 Series Multiplatform Phones allow you to pair your mobile device such as phone or tablet
More informationHow to Set Up Windows 7
How to Set Up Windows 7 If the computer name is needed, log on as STLP on the domain and right click Computer and click properties. On 7/Vista, the name is found under the Computer name, domain, and workgroup
More informationThis is a GENERAL Servant Keeper Network Installation help sheet. If you need further assistance, please contact your network administrator.
SK Help Network Help Sheets - Workstation Installation This is a GENERAL Servant Keeper Network Installation help sheet. If you need further assistance, please contact your network administrator. Due to
More informationObtaining a login and password to the Online Application
Obtaining a login and password to the Online Application You should have received a password to the online application from Regional Credentialing. If you ve forgotten your password, please contact us.
More information