HP 5130-POE-143 Release Notes

Transcription

1 HP 5130-POE-143 Release Notes Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice.

2 Contents Version information 1 Version number 1 Version history 1 Hardware and software compatibility matrix 1 Upgrading restrictions and guidelines 2 Software feature and command updates POE POE Operation changes POE POE Restrictions and cautions 3 Open problems and workarounds 3 List of resolved problems 3 Resolved problems in Resolved problems in Related documentation 3 Obtaining documentation 3 Contacting HP 3 Subscription service 4 Appendix A Upgrading software 5 Upgrading at the CLI 5 Upgrading PoE through FTP 5 Upgrading PoE through TFTP 6 i

3 List of Tables Table 1 Version history 1 Table 2 Hardware and software compatibility matrix 1 ii

4 This document describes the features, restrictions and guidelines, open problems, and workarounds for version 5130-POE-143. Before you use this version in a live network, back up the configuration and test the version to prevent software upgrade from affecting your live network. Version information Version number Version number: 143 Note: You can view the version number with the display poe pse command in any view. See Note 1. Version history Table 1 Version history Version number Last version Release date Release type Remarks 5130-POE-143 None Release version Bug Fix 5130-POE-140 None Release version Bug fix 5130-POE-130 None Pre-production First release Hardware and software compatibility matrix Table 2 Hardware and software compatibility matrix Item Product family Hardware platform Minimum memory requirements Minimum Flash requirements Specifications HP 5130EI Switch Series HP G-PoE+-4SFP+ (370W) EI Switch JG936A HP G-PoE+-4SFP+ (370W) EI Switch JG937A HP G-PoE+-4SFP+ (370W) EI Brazil Switch JG977A HP G-PoE+-4SFP+ (370W) EI Brazil Switch JG978A HP G-PoE+-2SFP+-2XGT (370W) EI Switch JG940A HP G-PoE+-2SFP+-2XGT (370W) EI Switch JG941A 1024 MB 512 MB PoE firmware version 143 PoE firmware files 5130-POE-143.bin Display the PoE version of the HP 5130EI switch: [HP]display poe pse PSE ID : 4 1

5 Slot No. : 1 SSlot No. : 0 PSE Model : LSP7POED PSE Status : Enabled Power Priority : Low Current Power : 0.0 W Average Power : 0.0 W Peak Power : 0.0 W Max Power : W Remaining Guaranteed Power : W PSE CPLD Version : - PSE Software Version : Note 1 PSE Hardware Version : Legacy PD Detection : Disabled Power Utilization Threshold : 80 PD Power Policy : Disabled PD Disconnect-Detection Mode : DC Upgrading restrictions and guidelines Software feature and command updates 5130-POE POE-140 Operation changes 5130-POE POE-140 2

6 Restrictions and cautions Open problems and workarounds List of resolved problems Resolved problems in Symptom: After a random period of runtime (which typically has been observed to be several weeks) all ports stop providing PoE power. Condition: This is a timing issue between the Comware7 software and the PSE software running on the power controller. When the Comware7 software is very busy the timing issue can occur. Resolved problems in 140 Symptom: Occasionally (perhaps 1 in 100) no PoE power is provided after the switch reboots. Condition: This symptom occurs due to a random timing issue in the PoE initialization software. Related documentation None Obtaining documentation To find related documents, browse to the Manuals page of the HP Business Support Center website: Contacting HP For worldwide technical support information, see the HP support website: Before contacting HP, collect the following information: Product model names and numbers 3

7 Technical support registration number (if applicable) Product serial numbers Error messages Operating system type and revision level Detailed questions Subscription service HP recommends that you register your product at the Subscriber's Choice for Business website: After registering, you will receive notification of product enhancements, new driver versions, firmware updates, and other product resources. 4

8 Appendix A Upgrading software Upgrading at the CLI You can remotely download the PoE file at the CLI. Upgrading PoE through FTP This section uses the topology in Figure 1 as an example. Run FTP server on the management PC at , create an FTP username admin and password, specify the source file path, telnet to the switch, and get the software package file from the server. Figure 1 FTP download from a server Switch Ethernet port IP network PC FTP Client FTP Server Download the file to the switch by using FTP. <HP> ftp Trying... Press CTRL+K to abort Connected. 220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user User(none):admin 331 Give me your password, please Password: 230 Logged in successfully [ftp] get 5130-POE-xxx.bin [ftp] bye 2. Upgrade PoE. When PoE is operating correctly, execute the following command to upgrade PoE: <HP>system-view System View: return to User View with Ctrl+Z. [HP] poe update refresh 5130-POE-xxx.bin pse 4 This command will refresh firmware on the specific PSE(s), Continue? [Y/N]:y System is downloading firmware into the hardware. Please wait Refresh firmware on the specific PSE(s) successfully! 5

9 When PoE is operating incorrectly, or PoE cannot be upgraded by using the previous method, upgrade PoE in full mode: <HP>system-view System View: return to User View with Ctrl+Z. [HP]poe update full 5130-POE-xxx.bin pse 4 This command will fully update firmware on the specific PSE(s), Continue? [Y/N] :y System is downloading firmware into the hardware. Please wait Update firmware on the specific PSE(s) successfully! NOTE: The device stops supplying power to PDs during the PoE upgrade process. After the upgrade is completed, the device continues to supply power to the PDs. After the upgrade is completed, you can use the display poe pse command to view whether the upgrade is successful. For more information, see Note 1. Upgrading PoE through TFTP The switch can work as a TFTP client to download files from a TFTP server. The upgrade procedures are the same as upgrading PoE through FTP. 6