Setup Guide. Before Setting Up the Printer

Size: px
Start display at page:

Download "Setup Guide. Before Setting Up the Printer"

Transcription

1 Introduction Cution Series Series Setup Guide Series Introductory Informtion Instructions in this Setup Guide show the ipf840 printer. Note tht your printer my look different from these illustrtions in some cses. However, the bsic opertions re the sme. The mrkers used in this setup guide re for the ipf830 series, for the ipf840 series, nd for the ipf850 series. ENG Red this mnul before ttempting to operte the printer. Keep this mnul in hndy loction for future reference. Before Setting Up the Printer Before setting up the printer, check the completed imge of the printer you purchsed nd mke sure you hve enough spce to set up the printer. It is recommended tht you reserve spce of the following dimensions to llow you to work round the printer. 200mm 150mm 150mm 150mm 1500mm 900mm(*) 100mm 100mm 200mm 100mm 600mm 200mm 200mm 600mm 200mm 600mm 200mm 258mm * This is the spce tht is required for working between the stcker nd printer such s when replcing pper or using the output stcker. Instlltion spce (W x D x H mm) If you re using the optionl wheeled output stcker, you should reserve spce of the sme dimensions s the ipf840. Instlltion spce (W x D x H mm) Instlltion spce (W x D x H mm) Reserve spce tht does not hve ny steps so tht there re no obstcles to moving the Stcker. Overview of Setup Set up the printer using the following procedure. Only perform the steps for which the nme of the model you purchsed is specified on the right of the printer. * Assemble the Stnd (P.3) Even if you do not use the printer driver, be sure to instll Medi Configurtion Tool from the provided User Softwre CD-ROM. With Medi Configurtion Tool, the pper types tht re vilble in your re cn be registered to the printer. For instructions on instlltion, refer to "Instll the Softwre" on pge 11. (In Windows, select Instll Individul Softwre in the Setup Menu window to instll Medi Configurtion Tool only.) * Instll the Roll Unit Instll the Printer * Attch the Medi Tke-up Unit * Set Up the Output Stcker Prepre to Turn the Power On Instll the Ink Tnks (P.3) (P.3) (P.5) (P.5) (P.5) (P.7) Detils for ech step re given in this Setup Guide. Simply follow the instructions to instll the printer. If n error messge is displyed during setup or other problems occur, refer to "Responding to Messges" on pge 20. Some items re included with the printer but not described in this mnul. Keep these items in sfe plce fter setup becuse they re used in vrious printing pplictions. For instructions on the included items not described in this mnul, refer to the User's Guide. A cble to connect the printer to computer is not provided with the printer. Instll the Printhed (P.9) Lod Pper to Adjust the Printhed (P.10) Instll the Softwre (P.11) * Attch the Stcker (P.17) Store Accessories in the Pockets (P.17) Cnon, the Cnon logo, nd imgeprograf re trdemrks or registered trdemrks of CANON INC. Microsoft is registered trdemrk of Microsoft Corportion. Windows is trdemrk or registered trdemrk of Microsoft Corportion in the U.S. nd/or other countries. Windows Vist is trdemrk or registered trdemrk of Microsoft Corportion in the U.S. nd/or other countries. Mc, Mc OS, OS X nd Bonjour re trdemrks of Apple Inc., registered in the U.S. nd other countries. All other trdemrks or registered trdemrks described in this Setup Guide re the property of their respective owners. How to Disply the Electronic Mnuls (P.18) * Refer lso to the Setup Guide for the ccessories nd options in the following tble. -List of ccessories nd options Printer Stnd BU-03 Wheeled output stcker (Option) TU-06 Medi tke-up unit (Option) Printer Stnd (Roll unit support) BU-03 Wheeled output stcker Printer Stnd (Roll unit support) RS-01 Stcker QT5-749-V * Q T V 1 * CANON INC. 205 PRINTED IN CHINA

2 The product is pckged divided into severl seprte boxes. The wheeled output stcker nd roll unit my be included in the box lbeled "RB-01" depending on the region where you purchsed the printer. The stcker nd roll unit my be included in the box lbeled "RS-01" depending on the region where you purchsed the printer. Printer nd Stnd Pckge Contents c d b. Printer b. Set of stnds (*1) c. Included pper d. Set of printer documenttion e. Strter ink tnks (x5) (C, M, Y, MBK, BK) f. Printhed g. Allen wrench (*2) h. 3-inch pper core ttchment #1 i. 3-inch pper core ttchment #2 j. Ejection support (x4) (*3) k. Set of CD-ROMs l. Power cord j *1 : Includes the stnd for the sttionry output stcker or the stnd for the wheeled output stcker. *2 : If you purchsed the ipf850 Series, the Allen wrench is lso used for setting up the stcker. *3 : Only included when the sttionry output stcker or the stcker is included s stndrd. e k f Wheeled Output Stcker i h g BU-03 Contined in the box lbeled "BU-03". Refer to the "Wheeled Output Stcker Setup Guide" for detils on the products included in the box. Although this is optionl on the ipf830 Series, it my be included s stndrd in some regions. Roll Unit A A Contined in the boxes lbeled "A" nd "B". Refer to the "Printer Stnd Setup Guide" for detils on the products included in the boxes. l B B Stcker Refer to the "Stcker Setup Guide" for detils on the products included with the Stcker. The Mnuls Supplied with This Printer After instlling the printer s shown in this Setup Guide, refer to the mnuls for instructions on opertion nd mintennce. Printed Mnuls Quick Guide The Quick Guide contins informtion such s wrnings for using this product sfely nd how to operte the nvigtion tht is useful when replcing pper, ink tnks, nd the printhed. Electronic Mnuls Bsic Guide The Bsic Guide describes the following informtion. Loding pper, Replcing the consumbles, Control Pnel menus, nd others Troubleshooting tips nd Error messges Preprtions for trnsferring the printer User's Guide This guide describes dvnced usge of the printer such s pper sving tips, how to print poster nd bnner with the supplied softwre nd print qulity djusting method, in ddition to the bsic instructions for printing on roll pper or cut sheet. Pper Reference Guide This guide describes bout the types nd specifictions of the vilble medi on the printer. To refer to the electronic mnuls Refer to "How to Disply the Electronic Mnuls" (P.18) 2

3 Assemble the Stnd Assemble the stnd on which you will instll the printer. -> Refer to "Assemble the Stnd" in the Printer Stnd Setup Guide Instll the Roll Unit Attch the roll unit to the stnd. -> Refer to "Instll the Roll Unit" in the Printer Stnd Setup Guide Instll the Printer 1 Remove the pckging mteril on top of the printer. While 2 under two people hold the crrying hndles printer the little, printer hve on one third end person nd lift remove the the 3 pckging mteril nd the plstic covering from under the printer. After the pckging mteril hs been removed, lower the printer. Remove the pckging mteril nd the plstic covering from the other side of the printer the sme wy. 4 Pull out the roll unit. 5 With three people holding the crrying hndles under the printer on both ends, lift the printer. Cution The printer lone weighs pproximtely 2 kg. Moving the printer requires t lest six people, three on either side. Be creful to void bck strin nd other injuries. When moving the printer, firmly grsp the crrying hndles () under ech side. Holding the printer t other positions is dngerous nd cuse injury nd dmge if the printer is dropped. When setting the printer down temporrily mke sure to put the printer on flt, stble plce. When stnding the printer up, mke sure the side with the control pnel is up, nd plce crdbord or other mteril underneth to prevent scrtching. Furthermore, mke sure tht the weight of the printer is tken by the corner of the printer. If the weight is tken by ny other prt of the printer, the printer my become dmged. When stnding up the printer or supporting the printer, hold the metl prts of the printer. If you hold plstic prt, the printer my become dmged. The wy to set the printer down or to crry with the lod only to the center of the printer, my cuse dmge to the printer. 3

4 Align the tringles on the bck of the printer nd Stnd when setting the printer on the Stnd. 6 7 Secure the printer nd Stnd firmly together using four M4 hex screws on ech side by the Allen Wrench. Push in the roll unit. 8 Use the Roll Unit Cble to connect the port on the bck of the roll unit to the Roll Unit Port on the bck of the printer. Insert the Roll Unit Cble firmly, ll the wy in. 4

5 Attch the Medi Tke-up Unit (Option) Attch the medi tke-up unit (optionl) which utomticlly tkes up printed roll pper. -> Refer to the Medi Tke-up Unit Setup Guide included with the medi tke-up unit Set Up the Output Stcker Attch the wheeled output stcker or sttionry output stcker to collect ejected pper. -> Refer to "Attch the Output Stcker" in the Printer Stnd Setup Guide Prepre to Turn the Power On Remove the protective pckging mteril from the printer. Remove the tpe nd other pckging mteril used to secure the 1 2 printer. Open the Top Cover. 3 Use the Allen Wrench to loosen the screw of the Belt Stopper (). Rotte the Belt Stopper to the left nd remove the stopper. Keep the Belt Stopper you removed nd the Allen Wrench for future use. You will need them in cse you move the printer to nother loction. When you open the top cover, clening brush is stored on the right side. Tke it out nd use it when clening inside the top cover. (when using the sttionry output stcker or the stcker) Lift the Ejection Guide. 4 5 Attch the four Ejection Supports () on the bck of the Ejection Guide. 5

6 (when using the sttionry output stcker or the stcker) Lower the Ejection Guide. 6 7 Close the Top Cover. 8 Plug the power cord into the Power Supply Connector on the bck of the printer. 9 Plug the power cord into the outlet. 6

7 M BK R G BK M M BK BK G Instll the Ink Tnks Instll the 5 ink tnks. 1 Press the Power button to turn on the printer. 2 When the following screen ppers, use the nd keys to select lnguge nd press OK. 3 Select your locl time zone nd press OK. Lnguge English 日本語 Frnçis Itlino Deutsch 1/2 Time Zone 0:London (GMT) 1/5 +1:Pris,Rome +2:Athens,Ciro +3:Moscow +4:Eerevn,Bku 4 Instructions on ink tnk instlltion re shown on the disply screen. Open the ink tnk covers s instructed. 5 Rise the stopper () of the ink tnk lock lever for the color you re mounting. After rising the ink tnk lock lever s fr s possible, pull it forwrd. 6 Shke ech ink tnk gently 7 to 8 times before opening its pouch. Filure to shke the ink tnks my result in reduced print qulity becuse ink ingredients hve settled on the bottom of the tnk. Press down on the ink tnk lock lever until it locks. Mke sure the ink tnk lock lever stys in the locked position. If the ink tnk is cold, llow it to djust to room temperture before ttching it to the printer. 7 Open the pouch nd remove the ink tnk. b 8 Orient the ink tnks nd mount them in the holders with ink holes down s shown in the figure. 9 After rising the ink tnk lock lever s fr s possible, press it bck down until it clicks into plce. At this time, repet steps 5 nd 9 two to three times to ensure tht the ink tnk is securely instlled in the printer. Never touch the ink holes () or metl contcts (b). Touching these prts my cuse stins, dmge the ink tnk, nd ffect print qulity. Avoid dropping the ink tnk fter removing it from the pouch. Otherwise, ink my lek nd cuse stins. Do not remove ink tnks to shke them fter they hve been mounted. Doing so my cuse ink to spill. b An ink tnk cnnot be mounted in the holder if it is not oriented correctly for the color. Do not try to force n ink tnk into the holder if it does not go in normlly. Check the color indicted on the lbel ffixed to the ink tnk lock lever nd the ink tnk orienttion, nd then try mounting the tnk into the holder gin. GY 7

8 M BK R G B 10 Mke sure the ink lmp lights red. 11 Check tht the ink lmp is light, nd then push the ink tnk more strongly until it touches the bse. 12 Repet steps 5 to 11 to mount ech of the Ink Tnks. Close the ink tnk covers. If the ink lmp does not light, repet steps 5 nd 9. 8

9 Instll the Printhed When Open top cover. is displyed on Pull the printhed fixer lever forwrd ll 1 2 the disply screen, open the top cover. the wy to open it completely. 3 Lift the printhed fixer cover () to open it fully. At this time, mke sure tht no debris becomes dhere to the contcts (b) on the crrige. Instructions re now shown on the disply screen regrding printhed instlltion. b 4 Hold the printhed by the grips () s you remove it from the pouch. 5 Remove the ornge protective prt (). To remove ornge protective prt (b), push the grip (c) s you remove the prt. b c 6 Insert the printhed into the crrige (b) with the ink holes () fcing wy from the printer s shown in the figure. Crefully push the printhed firmly into the crrige (b), ensuring tht the prt covered by the protective prt does not touch the crrige. b Never touch the prts covered by the protective prt. This my dmge the printhed nd ffect printing qulity. The printhed contins ink, so be creful not to spill it once the protective prts re removed. Do not rettch the protective prt fter removing it. Dispose of these mterils ccording to locl regultions. Pull the printhed fixer cover down towrd Push the printhed fixer lever bck the front to lock the printhed in plce. Close the top cover. 9

10 Lod Pper to Adjust the Printhed Lod the included pper nd djust the Printhed. 1 Select type of pper for printhed dj. is shown on the disply screen. Use the nd keys to select Cut Sheet nd then press OK. 2 Open the top cover nd lift the relese lever. Do not touch the liner scle (), crrige shft (b), or fixed blde (c). This my stin your hnds nd dmge the printer. c b 3 Insert the pper included with the printer between the plten () nd pper retiner (b) in portrit orienttion with the printed side of the pper fcing up. Lod the pper ligned with the pper lignment lines (c) to ensure tht the pper is not crooked, nd lign the leding edge of the pper with the front side of the line (d). When inserted, sheets re utomticlly held by suction ginst the plten. 4 Lower the relese lever nd close the top cover. c d c b 5 The screen for selecting the pper type is shown on the disply screen. Press or to select the type of pper loded in the printer. Select Coted Pper nd then press OK. Then from the menu tht ppers, select Coted Pper nd then press OK. 6 Once feeding the pper is finished, the printer utomticlly strts chrging the system with ink nd djusting the printhed. Chrging the system with ink nd djusting the printhed for the first time tkes bout 30 minutes. Instll the softwre on your computer while the printer is working. (See "Instll the Softwre" on pge 11) Pper begins feeding. Chrging the system with ink fills the system from the ink tnks to the printhed. In ddition, clening is performed to keep the printer in optiml condition. This my cuse the remining ink indictor nd mintennce crtridge cpcity indictor to drop some mount. The strter ink tnk is for first-time instlltion. It is recommended tht you purchse replcement ink tnks quickly. If Pper loded crooked. is displyed, relod the cut sheet by referring to step 3. Once the printhed djustment hs finished, the pper with the djustment pttern printed on it is ejected. Relese the relese lever nd remove the pper. This completes the printer setup. When you lod roll pper fter the setup, you need to first press the Lod key nd select roll pper s the pper source. For detils, refer to the User's Guide nd Bsic Guide tht cn be ccessed by the procedure in "How to Disply the Electronic Mnuls" (P. 18). You cn lso see the method for loding roll pper using the control pnel nvigtion function. You cn view the nvigtion using the following procedure. 1. Press the Nvigte key. 2. Press the nd keys to select Lod Roll Pper nd then press the OK key. 3. Press the nd keys to select View Op. Guide nd then press the OK key. The nvigtion strts. 10

11 Instll the Softwre Request for coopertion with qulity improvement of Cnon Lrge Formt Printer For development nd mrketing of products tht better meet customer needs, Cnon requests tht you send informtion relted to your Cnon Lrge Formt Printer to Cnon through the Internet. Check the content of the "Extended Survey Progrm" window tht is displyed during the softwre instlltion process. (See step 6 on pge 12) If you gree to our request, Cnon requests tht you pprove to instll the Cnon Lrge Formt Printer Extended Survey Progrm. The Cnon Lrge Formt Printer Extended Survey Progrm utomticlly sends nonymous printer informtion on periodic bsis. The Cnon Lrge Formt Printer Extended Survey Progrm does not send informtion unrelted to Cnon Lrge Formt Printer. Cnon does not send e-mil to you using the Cnon Lrge Formt Printer Extended Survey Progrm. You cn terminte utomtic trnsmission of the Cnon Lrge Formt Printer Extended Survey Progrm t ny time. The utomtic trnsmission cn be terminted t ny time. If you hve ny questions bout this progrm, plese contct our customer support contct center. Windows You cn print from Windows vi USB or TCP/IP (network) connections. The instlltion procedure vries depending on how your printer is connected. Instll the softwre by following instructions below. If you connect the printer with USB cble, refer to "For USB connections" on pge 11. If you connect the printer with TCP/IP (network), refer to "For TCP/IP (network) connections" on pge 12. Instlltion requires dministrtive rights (such s those of Administrtor). Be sure to log on using n ccount with dministrtive rights before instlltion. The following screen my be displyed during instlltion depending on the security settings of your computer. Select Dectivte the block nd click Next. <Comptible Operting Systems> 32-bit: Windows 8.1, Windows 8, Windows 7, Windows Vist, Windows Server 2008, Windows Server 2003 R2, Windows Server 2003, Windows XP 64-bit: Windows 8.1, Windows 8, Windows 7, Windows Vist, Windows Server 2012 R2, Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, Windows Server 2003 R2, Windows Server 2003 For the Windows OS, use the ltest version of Service Pck. For USB connections Instll the softwre Use USB cble tht conforms to the Hi-Speed USB specifiction. Connect the USB cble to the printer ccording to the on-screen instructions during instlltion of the printer driver. If you connect the USB cble before instlling the printer driver, the printer driver my not be instlled correctly. 1 After mking sure the printer is not connected to the computer, turn the computer on. Insert the provided User Softwre CD-ROM for your operting system in the CD-ROM drive. 2 In the Setup Menu window, click Instll Printer Driver. To choose different lnguge, click Lnguge. You cn view the bsic opertion of the printer in the Bsic Guide tht is contined on the CD-ROM by clicking View Bsic Guide. 3 Select the softwre to instll in the Instlltion List window, nd then click Next. Point the mouse pointer t softwre nme to disply summry of the softwre. 4 In the Select Country or Region of Use window, select the country or region of 5 After reding the license greement, click Yes. use nd click Next. 11

12 6 If you cn gree Extended Survey Progrm, click Agree. 7 If you cn respond to the questionnire, click Next. 8 Confirm your questionnire responses, nd click Next. 9 In the Printer Selection window, select The printer is connected directly to computer nd click Next. 10 In the Printer Instlltion dilog box, select Instll with USB Connection, nd click Next. 11 When the following dilog box is displyed, mke sure the printer is on nd use the USB cble to connect the printer to the computer. If wrning messge is displyed, click Retry to try gin. 12 After reviewing the instlltion results in the Complete Instlltion window, click Next. 13 In the Finish window, select Restrt my computer now nd click Restrt. Be creful not to insert the USB cble into the LAN port. When you restrt the computer, the softwre settings re enbled. The softwre instlltion is now completed. For TCP/IP (network) connections Instll the softwre If the printer is lredy connected to the network, confirm the IP ddress ssigned to the printer. Ask your network dministrtor for further informtion. 2 Mke sure the printer is on. Turn the computer on nd insert the provided User Softwre CD-ROM for your operting system in the CD-ROM drive. 1 Use the LAN cble to connect the LAN port on the bck of the printer to the hub port. If the printer is lredy connected to the network, proceed to step 2. If the printer is on, the Link indictor under the LAN port lights. 1000Bse-T connection 100Bse-TX connection 10Bse-T connection The LED on the bottom lights green. The LED on the top lights ornge. The LED on the top lights green. 3 Perform procedures of steps 2-8 on pges

13 4 In the Printer Selection window, select The printer is connected to computers in network nd click Next. 5 When serching the vilble printer on the network After reding the precutions in the Getting Redy window, select Find vilble printers in the network nd click Next. Proceed to step 6. When entering the printer's IP ddress mnully After reding the precutions in the Getting Redy window, select Specify the IP ddress of vilble printers in the network nd click Next. Proceed to step 8. 6 When serching the vilble printer on the network Avilble printers re listed in the Serch Results window. Select printer from the list on either their IPv4 Devices or IPv6 Devices tbs nd click Next. The IPv6 Devices tb is not displyed in Windows XP, Windows Server 2003 R2, nd Windows Server If the printer you wnt to use is not displyed in the list on the IPv6 Devices tb, connect vi IPv4 insted. If the printer you wnt to use is not displyed in the list of printers on the IPv4 Devices tb, refer to "When the printer cnnot be found on the network" on pge 14 to setup nd configure n IP ddress for the printer. The following step differs depending on the IP Address Sttus of the selected printer. In the cse of Not Set or IP Address Overlp, proceed to step 7. In the cse of Avilble, the instlltion begins. Proceed to step 9. 7 When serching the vilble printer on the network In the Method of Configuring IP Addresses window, select the method of configuring the IP ddress s suitble for your system. To configure by directly entering the IP ddress Select Configure mnully in Method of Configuring IP Addresses nd enter the IP ddress. To hve the IP ddresses llocted utomticlly using the DHCP server function Select Configure utomticlly. Note tht other settings outside of the procedure re lso required. ("Using DHCP", P.14) Once you hve selected the method for configuring IP ddresses, enter your preferred nme for the printer in Device Nme nd the instlltion loction in Printer Loction under Informtion About Printer to Configure, nd click Instll to begin the instlltion. Proceed to step 9. 8 When entering the printer's IP ddress mnully In the IP Address Specifiction window, select either IPv4 Address or IPv6 Address to enter the printer's IP ddress nd click Instll. The instlltion process begins. Ask your network dministrtor for the IP ddress, s needed. The IPv6 Devices tb is not displyed in Windows XP, Windows Server 2003 R2, nd Windows Server After reviewing the instlltion results in the Complete Instlltion window, click Next. 10 In the Finish window, select Restrt my computer now nd click Restrt. 11 When you restrt the computer, the softwre settings re enbled. The softwre instlltion is now completed. 13

14 When the printer cnnot be found on the network If your printer cnnot be found when connecting to the network for the first time, setup n IP ddress for the printer nd then configure it on the printer. 1 On the tb selection screen of the control pnel, press the nd keys to select (settings/dj. tb) nd press OK. 2 Use the nd keys to select Interfce Setup nd press OK. When ink fills the system for the first time, fter printhed djustment is finished, specify the IP ddress on the printer's control pnel. When ink fills the system for the first time, do not operte the printer until printhed djustment is finished. No Pper Loded OK:Setting/Adj. Menu Mint.C Remin.: 80% Tot.Print Are(m2): Use the nd keys to select TCP/IP nd press OK. 4 Enter the IP ddress. Nvigte through the following menus using the nd keys on the control pnel. 1. Select IPv4 nd press OK. 2. Select IPv4 Settings nd press OK. 3. Select IP Address nd press OK. 4. Enter the IP ddress. How to enter IP ddresses 1. Press the nd keys to select field for inputting vlues. 2. Use the nd keys to input vlues. Pressing increses the vlue by one. Pressing decreses the vlue by one. Holding down either the or keys continully increses or decreses the vlue. 3. Press OK once you hve finished. 5 Press 6 On Menu. the registrtion confirmtion messge tht ppers, select Yes using the nd keys, nd then press OK. The IP ddress is set on the printer. Next, restrt instlltion of the printer driver. 7 In the Serch Results window, select Specify the IP ddress of vilble printers in the network nd click Next. When the IP Address Specifictions window ppers, follow the instructions of "When entering the printer's IP ddress mnully" in step 8 to 11 on pge 13 to complete the instlltion of the softwre. If the following screen ppers, click Retry nd select Specify the IP ddress of vilble printers in the network on the next screen tht ppers. Using DHCP To use the DHCP server function to utomticlly llocte n IP ddress to the printer, one of the following settings needs to be configured. Check with your network dministrtor for the settings tht mtch your system. When used in n environment with DNS server Configure the DNS dynmic updte function in the printer nd register the printer DNS host nme with the DNS server. When used in n environment without DNS server Configure the DHCP server to lwys llocte the sme IP ddress to the printer. This section describes how to turn on DNS dynmic updte from the control pnel of the printer. The DNS dynmic updte function cn lso be configured using Remote UI. Refer to "Configuring the Printer's TCP/ IP Network Settings With RemoteUI" in the user guide for detils. 1 Perform 2 Select 3 Select 4 Select steps 1 to 3 of the procedure in "When the printer cnnot be found on the network" on pge 14. IPv4 or IPv6 using the nd keys nd then press OK. DNS Settings using the nd keys nd then press OK. DNS Dync updte using the nd keys nd then press OK. 5 For IPv4 Select On using the nd keys nd then press OK. For IPv6 1. When Use the sme host nme nd domin nme s IPv4? is displyed, select Off using the nd keys nd then press OK. 2. Select Sttefull Addr using the nd keys nd then press OK, nd then select On using the nd keys nd then press OK. 3. Set Stteless Addr to On using the sme procedure s in Step 2. 14

15 Instll the softwre Mc OS You cn print from Mc OS vi USB or network connections such s Bonjour or IP. Instll the softwre depending on your computer environment. <Comptible Operting Systems> OS X v to v10.9 If you instll the softwre, log onto the computer s n dministrtor. 1 After mking sure the printer is not connected to the computer, turn the computer on. Insert the provided User Softwre CD-ROM for your operting system in the CD-ROM drive. 2 On the desktop, double-click the CD-ROM icon nd then the ipf Printer Setup icon. User Softwre 3 Click Next. 4 If screen requesting the nme nd pssword is displyed, enter the user nme nd pssword of user with dministrtive rights nd click OK (or Instll Helper on OS X v10.7 or lter). 5 Select the country or region where you re using the printer, nd click Next. 6 Select the softwre to instll nd click Next. Move the mouse pointer ner the nme of the softwre to disply n overview of the softwre. 7 After reding the softwre license greement, click Yes. 8 If you cn gree Extended Survey Progrm, click Agree. 9 If you cn respond to the questionnire, click Next. 10 Confirm your questionnire responses, nd click Next. 11 The progress of the instlltion is displyed. Once ll of the instlltion hs finished, the screen utomticlly dvnces to the setup screen. Connect the printer to computer 12 When the following screen is displyed, mke sure tht the printer is on, nd then connect the printer to the computer or the network with cble. When connecting to network, pss the network cble through the wiring brcket (). For USB connections For network connections Be creful not to insert the USB cble into the LAN port. 15

16 Select the printer 13 Select the method of connecting to the printer, nd click Next. For USB connection, the printer is utomticlly dded nd you should proceed to step Click Add Printer. 15 Select the printer to dd from Defult nd click Add. You cn view description of dding printers by clicking Help. It my tke long time until the printer informtion is displyed on the screen. You cn lso dd the printer by specifying the IP ddress by selecting IP. 16 Click Next. 17 Select the Execute medi type updte check box nd click Next. 18 Click OK. 19 Click Exit. The following screen is displyed while the medi informtion is being updted. Do not perform ny other opertions. When the medi informtion hs been updted, the screen is no longer displyed. If the sme model of printer is lredy registered on the computer, screen is displyed for printer selection. Select the desired printer nd click Next. 16

17 Attch the Stcker Attch the stcker for collecting pper ejected by printing to roll pper. -> Refer to the Stcker Setup Guide included with the stcker Store Accessories in the Pockets 1 Use the mnul pocket to store the mnul so you cn refer to it s needed. 2 Store ccessories such s the 3-inch pper core ttchment in the ccessory pocket. When the setup is completed, refer to the vrious mnuls to use the printer. Refer to "The Mnuls Supplied with This Printer" on pge 2. 17

18 How to Disply the Electronic Mnuls The electronic mnuls for this printer re the User's Guide, Pper Reference Guide, nd Bsic Guide. For detils on the content of ech mnul, refer to "The Mnuls Supplied with This Printer" on P. 2. Viewing the User's Guide nd Pper Reference Guide The User's Guide nd Pper Reference Guide re not included with the printer. You cn view ech of the mnuls on the Web from the links in the instlled softwre by using the following procedure. An Internet connection is required in order to view the mnuls. On Windows This section describes how to view the User's Guide nd Pper Reference Guide from the printer driver. You cn lso view ech of the mnuls by clicking the links to the product mnuls from other instlled softwre. 1 On Windows 7 nd erlier Click the Control Pnel from the desktop Strt menu. On Windows 8 nd lter 1. Move the mouse pointer to the bottom right corner of the desktop to disply the settings br (chrms). 2 Click Hrdwre nd Sound (or Printer nd Other Hrdwre). If you re strting from the Strt screen, first click the Desktop tile to disply the desktop. 2. Click the Settings button nd then Control Pnel. If you hve ppliction softwre open, you cn disply ech mnul in the smllest number of steps by opening the printer driver from the print menu. (You might not be ble to disply the printer driver from the ppliction softwre in some cses.) <Opertion Exmples> 1. Select Print from the File menu. 2. In the Print dilog box, select the printer nd click the Properties or Preferences button. 3. Perform the procedure from step 6. Click Devices nd Printers (or Printers 3 4 or Printers nd Fxes). Right-click the printer nd then click Printer Properties (or Properties). 5 Click Preferences (or Printing Preferences) to open the Printing Preferences dilog box tht hs the nme of the printer in the title. Select the Support sheet nd click the 6 7 User Mnul button. To disply the user guide, click User's Guide. To disply the Pper Reference Guide, click Pper Reference Guide. On Mc OS This section describes how to view the User's Guide nd Pper Reference Guide from the Printmonitor tht is instlled with the printer driver. Click the System Preferences icon in the 1 2 Dock. Click Print & Scn. (This is identified s Printers & Scnners or Print & Fx in other versions of Mc OS.) You cn lso view ech of the mnuls by clicking the links to the product mnuls from other instlled softwre. 18

19 Select the printer from the list of printers 3 4 nd click Options & Supplies. Click Utility. 5 Click Open Printer Utility. 6 Click Support. Click the User Mnul button. 7 8 To disply the user guide, click User's Guide. To disply the Pper Reference Guide, click Pper Reference Guide. Viewing the Bsic Guide The Bsic Guide is stored on the User Softwre CD-ROM tht is included with the printer. Use the following procedure to view it. On Windows Lod the User Softwre CD-ROM into the Click View Bsic Guide in the Setup CD-ROM drive of the computer. Menu window. Open the PDF file tht is contined in the folder tht opens. The Bsic Guide is displyed. On Mc OS Lod the User Softwre CD-ROM into the Double-click the CD-ROM on the Desktop CD-ROM drive of the computer. nd then the ipf Printer Setup icon. Click Bsic Guide. 4 Open the PDF file tht is contined in the folder tht opens. The Bsic Guide is displyed. 19

20 Responding to Messges Error messges my pper on the disply screen of the control pnel during printer instlltion. If so, it my not indicte problem with the printer, nd the issue my be esily resolved. Common messges nd the cuses re listed here with corrective ctions. For more informtion on other messges, refer to the User's Guide or Bsic Guide. (See "How to Disply the Electronic Mnuls" on P.18) Messge Cuse Corrective Action No ink tnk loded. Check ink tnk. There is no ink tnk loded. Lod or relod the ink tnk. (See steps 4-12 on pges 7-8) Cnnot recognize print hed. The printhed is not instlled. Instll the printhed. (See steps 1-9 on pge 9) Pper loded crooked. The loded pper is crooked. Relod the cut sheet. (See steps 2-5 on pge 10) Pper size not detected. Lift the relese lever nd relod pper. The leding edge of the cut sheet is loded behind the position indicted by the pper lignment line. The roll pper is fed even though cut sheet remins selected s the pper source. Relod the cut sheet so tht the leding edge of the cut sheet is in front of the pper lignment line. (See steps 2-5 on pge 10) Lift up the relese lever nd rewind the roll pper onto the roll holder. Next, press the Lod key, select roll pper s the pper source, nd feed the roll pper gin. For detils, refer to "Removing the Roll from the Printer" nd "Loding Rolls in the Printer" in the User's Guide nd Bsic Guide. No mintennce crtridge. The mintennce crtridge is not connected. Instll the mintennce crtridge correctly. Hrdwre error. xxxxxxxx-xxxx (x represents letter or number) ERROR Exxx-xxxx (x represents letter or number) The belt stopper or the tpe inside the top cover hs not been removed. You my hve encountered n error tht cnnot be resolved. You my hve encountered n error tht cnnot be resolved. Turn off the power, open the top cover, nd remove the tpe nd the belt stopper, then turn the power on. Turn off the printer nd wit t lest three seconds before restoring the power. If the messge ppers gin, write down the error code nd messge, turn off the printer, nd contct your Cnon deler for ssistnce. Write down the error code nd messge, turn off the printer, nd contct your Cnon deler for ssistnce. 20

Setup Guide. * Values enclosed in [ ] are for when the stand is attached. ipf650/ipf655. ipf750/ipf755. d. 3-inch paper core attachment L

Setup Guide. * Values enclosed in [ ] are for when the stand is attached. ipf650/ipf655. ipf750/ipf755. d. 3-inch paper core attachment L Introductory Informtion Setup Guide ENG Red this mnul before ttempting to operte the printer. Keep this mnul in hndy loction for future reference. Introduction Cution Instructions in this Setup Guide show

More information

Introductory Information. Setup Guide. Introduction. Space Required for Installation. Overview of Setup. Preparations. Install the Printheads

Introductory Information. Setup Guide. Introduction. Space Required for Installation. Overview of Setup. Preparations. Install the Printheads Introduction Setup Guide Introductory Informtion ENG Red this mnul efore ttempting to operte the printer. Keep this mnul in hndy loction for future reference. Overview of Setup These re the steps in printer

More information

Introductory Information. Setup Guide. Introduction. Overview of Setup. Space Required for Installation. Preparations. Attach the Ink Tanks

Introductory Information. Setup Guide. Introduction. Overview of Setup. Space Required for Installation. Preparations. Attach the Ink Tanks Introduction Setup Guide Introductory Informtion ENG Red this mnul efore ttempting to operte the printer. Keep this mnul in hndy loction for future reference. Overview of Setup These re the steps in printer

More information

Setup Guide. Electronic Manuals. a. Printer b. Roll holder c. Set of manuals d. Allen wrench e. Set of CD-ROMs MEMO

Setup Guide. Electronic Manuals. a. Printer b. Roll holder c. Set of manuals d. Allen wrench e. Set of CD-ROMs MEMO Introductory Informtion Introduction Setup Guide ENG Red this mnul efore ttempting to operte the printer. Keep this mnul in hndy loction for future reference. Overview of Setup These re the steps in printer

More information

Setup Guide. Supported paper. a. Printer b. Roll holder c. Set of printer documentation d. Allen wrench MEMO

Setup Guide. Supported paper. a. Printer b. Roll holder c. Set of printer documentation d. Allen wrench MEMO troduction Setup Guide troductory formtion ENG Red this mnul efore ttempting to operte the printer. Keep this mnul in hndy loction for future reference. Overview of Setup These re the steps in printer

More information

McAfee Network Security Platform

McAfee Network Security Platform Mnger Applince Quick Strt Guide Revision B McAfee Network Security Pltform This guide is high-level description of how to instll nd configure the Mnger Applince. For more detiled instlltion informtion,

More information

Basic Guide ENG. Printer Operations. Printer Operations. Troubleshooting. Printer Relocation. Printer Driver Installation

Basic Guide ENG. Printer Operations. Printer Operations. Troubleshooting. Printer Relocation. Printer Driver Installation Printer Opertions 1 Lrge-Formt Printers This Bsic Guide includes three booklets. Red this mnul fi rst. Bsic Guide Printer Opertions Sfety Precutions...2 Types of mnuls...5 Documenttion Conventions...6

More information

Start Here. Remove all tape and lift display. Locate components

Start Here. Remove all tape and lift display. Locate components HP Photosmrt 2600/2700 series ll-in-one User Guide Strt Here 1 USB cle users: Do not connect the USB cle until this guide instructs you to or the softwre my not instll properly. Use this guide to set up

More information

EasyMP Multi PC Projection Operation Guide

EasyMP Multi PC Projection Operation Guide EsyMP Multi PC Projection Opertion Guide Contents 2 Introduction to EsyMP Multi PC Projection 5 EsyMP Multi PC Projection Fetures... 6 Connection to Vrious Devices... 6 Four-Pnel Disply... 6 Chnge Presenters

More information

EasyMP Network Projection Operation Guide

EasyMP Network Projection Operation Guide EsyMP Network Projection Opertion Guide Contents 2 Introduction to EsyMP Network Projection EsyMP Network Projection Fetures... 5 Disply Options... 6 Multi-Screen Disply Function... 6 Movie Sending Mode...

More information

Epson iprojection Operation Guide (Windows/Mac)

Epson iprojection Operation Guide (Windows/Mac) Epson iprojection Opertion Guide (Windows/Mc) Contents 2 Introduction to Epson iprojection 5 Epson iprojection Fetures... 6 Connection to Vrious Devices... 6 Four-Pnel Disply... 6 Chnge Presenters nd Projection

More information

Welch Allyn CardioPerfect Workstation Installation Guide

Welch Allyn CardioPerfect Workstation Installation Guide Welch Allyn CrdioPerfect Worksttion Instlltion Guide INSTALLING CARDIOPERFECT WORKSTATION SOFTWARE & ACCESSORIES ON A SINGLE PC For softwre version 1.6.6 or lter For network instlltion, plese refer to

More information

Installation Guide AT-VTP-800

Installation Guide AT-VTP-800 Velocity 8 Touch Pnel The Atlon -BL nd -WH re 8 touch pnels in blck nd white, respectively, for the Atlon Velocity Control System. They feture contemporry, refined styling for modern presenttion environments

More information

File Manager Quick Reference Guide. June Prepared for the Mayo Clinic Enterprise Kahua Deployment

File Manager Quick Reference Guide. June Prepared for the Mayo Clinic Enterprise Kahua Deployment File Mnger Quick Reference Guide June 2018 Prepred for the Myo Clinic Enterprise Khu Deployment NVIGTION IN FILE MNGER To nvigte in File Mnger, users will mke use of the left pne to nvigte nd further pnes

More information

EasyMP Multi PC Projection Operation Guide

EasyMP Multi PC Projection Operation Guide EsyMP Multi PC Projection Opertion Guide Contents 2 About EsyMP Multi PC Projection Meeting Styles Proposed by EsyMP Multi PC Projection... 5 Holding Meetings Using Multiple Imges... 5 Holding Remote Meetings

More information

Setup Guide. Confirming the Installation Space. Installation space (W x D x H) 70.5 x 66.3 x 61.5 inches (1790 x 1684 x 1560 mm) 23.

Setup Guide. Confirming the Installation Space. Installation space (W x D x H) 70.5 x 66.3 x 61.5 inches (1790 x 1684 x 1560 mm) 23. Introductory Information Setup Guide ENGLISH Read this manual before attempting to operate the printer. Keep this manual in a handy location for future reference. Caution Instructions in this Setup Guide

More information

EasyMP Multi PC Projection Operation Guide

EasyMP Multi PC Projection Operation Guide EsyMP Multi PC Projection Opertion Guide Contents 2 About EsyMP Multi PC Projection Meeting Styles Proposed by EsyMP Multi PC Projection... 5 Holding Meetings Using Multiple Imges... 5 Holding Remote Meetings

More information

EasyMP Network Projection Operation Guide

EasyMP Network Projection Operation Guide EsyMP Network Projection Opertion Guide Contents 2 About EsyMP Network Projection Functions of EsyMP Network Projection... 5 Vrious Screen Trnsfer Functions... 5 Instlling the Softwre... 6 Softwre Requirements...6

More information

the machine and check the components Black Yellow Cyan Magenta Starter Ink Cartridges

the machine and check the components Black Yellow Cyan Magenta Starter Ink Cartridges Quick Setup Guide Strt Here DCP-J40DW Plese red the Product Sfety Guide first efore you set up your mchine. Then, plese red this Quick Setup Guide for the correct setup nd instlltion. WARNING CAUTION IMPORTANT

More information

Epson Projector Content Manager Operation Guide

Epson Projector Content Manager Operation Guide Epson Projector Content Mnger Opertion Guide Contents 2 Introduction to the Epson Projector Content Mnger Softwre 3 Epson Projector Content Mnger Fetures... 4 Setting Up the Softwre for the First Time

More information

pdfapilot Server 2 Manual

pdfapilot Server 2 Manual pdfpilot Server 2 Mnul 2011 by clls softwre gmbh Schönhuser Allee 6/7 D 10119 Berlin Germny info@cllssoftwre.com www.cllssoftwre.com Mnul clls pdfpilot Server 2 Pge 2 clls pdfpilot Server 2 Mnul Lst modified:

More information

Information regarding

Information regarding Informtion regrding LANCOM Advnced VPN Client 3.13 Copyright (c) 2002-2017 LANCOM Systems GmbH, Wuerselen (Germny) LANCOM Systems GmbH does not tke ny gurntee nd libility for softwre not developed, mnufctured

More information

NOTES. Figure 1 illustrates typical hardware component connections required when using the JCM ICB Asset Ticket Generator software application.

NOTES. Figure 1 illustrates typical hardware component connections required when using the JCM ICB Asset Ticket Generator software application. ICB Asset Ticket Genertor Opertor s Guide Septemer, 2016 Septemer, 2016 NOTES Opertor s Guide ICB Asset Ticket Genertor Softwre Instlltion nd Opertion This document contins informtion for downloding, instlling,

More information

License Manager Installation and Setup

License Manager Installation and Setup The Network License (concurrent-user) version of e-dpp hs hrdwre key plugged to the computer running the License Mnger softwre. In the e-dpp terminology, this computer is clled the License Mnger Server.

More information

vcloud Director Service Provider Admin Portal Guide vcloud Director 9.1

vcloud Director Service Provider Admin Portal Guide vcloud Director 9.1 vcloud Director Service Provider Admin Portl Guide vcloud Director 9. vcloud Director Service Provider Admin Portl Guide You cn find the most up-to-dte technicl documenttion on the VMwre website t: https://docs.vmwre.com/

More information

Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep these bags away from babies and children.

Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep these bags away from babies and children. Quick Setup Guide Strt Here DCP-8070D Before you cn use the mchine, red this Quick Setup Guide for the correct setup nd instlltion. For detiled informtion on how to use ll the fetures, chnge the defult

More information

Installation manual. Daikin Altherma low temperature monobloc option box EK2CB07CAV3. Installation manual. English

Installation manual. Daikin Altherma low temperature monobloc option box EK2CB07CAV3. Installation manual. English Instlltion mnul Dikin Altherm low temperture monobloc option box EKCB07CAV Instlltion mnul Dikin Altherm low temperture monobloc option box English Tble of Contents Tble of Contents About the documenttion.

More information

Easy Interactive Tools Ver.3.0 Operation Guide

Easy Interactive Tools Ver.3.0 Operation Guide Esy Interctive Tools Ver.3.0 Opertion Guide Esy Interctive Tools Summry 2 Fetures Esy Interctive Tools is n ppliction tht llows you to drw on projected imges. By using the interctive pen supplied with

More information

CKX-CCSW Confluency checker INSTRUCTIONS. Software for research/education This software is designed to use in research and or education fields.

CKX-CCSW Confluency checker INSTRUCTIONS. Software for research/education This software is designed to use in research and or education fields. INSTRUCTIONS Confluency checker NOTE: This instruction mnul is for the Olympus confluency checker. To ensure the sfety, obtin optimum performnce nd to fmilirize yourself fully with the use of this softwre,

More information

the machine and check the components USB Interface Cable Drum Unit Assembly (including Standard Toner Cartridge)

the machine and check the components USB Interface Cable Drum Unit Assembly (including Standard Toner Cartridge) Quick Setup Guide Strt Here DCP-8085DN Before you cn use the mchine, red this Quick Setup Guide for the correct setup nd instlltion. To view the Quick Setup Guide in other lnguges, plese visit http://solutions.rother.com/.

More information

Printing for Professionals

Printing for Professionals Printing for Professionls Quick Setup Guide Version 0 USA/CAN Quick Setup Guide Strt Here Before you cn use the mchine, red this Quick Setup Guide for the correct setup nd instlltion. IMPORTANT DO NOT

More information

the machine and check the components AC Power Cord Quick Setup Guide User s Guide Accessory Order Form

the machine and check the components AC Power Cord Quick Setup Guide User s Guide Accessory Order Form Quick Setup Guide Strt Here DCP-8080DN DCP-8085DN Before you cn use the mchine, red this Quick Setup Guide for the correct setup nd instlltion. To view the Quick Setup Guide in other lnguges, plese visit

More information

Assembly Instructions

Assembly Instructions ssemly Instructions 1 Plstic dust cover Scnner 3 Rer le op r with guide 5 eg (x) Mintennce kit 7 ssemly kit Power cles 9 Cross r Bottom r hp designjet copier cc00ps system recovery cd-rom 1 Front pnel

More information

the printer and check the components

the printer and check the components Quick Setup Guide Strt Here (EU only) HL-3040CN Before you cn use the printer, red this Quick Setup Guide for the correct setup nd instlltion. To view the Quick Setup Guide in other lnguges, plese visit

More information

Release Notes for. LANCOM Advanced VPN Client 4.10 Rel

Release Notes for. LANCOM Advanced VPN Client 4.10 Rel Relese Notes for LANCOM Advnced VPN Client 4.10 Rel Copyright (c) 2002-2018 LANCOM Systems GmbH, Wuerselen (Germny) LANCOM Systems GmbH does not tke ny gurntee nd libility for softwre not developed, mnufctured

More information

Registering as a HPE Reseller. Quick Reference Guide for new Partners in Asia Pacific

Registering as a HPE Reseller. Quick Reference Guide for new Partners in Asia Pacific Registering s HPE Reseller Quick Reference Guide for new Prtners in Asi Pcific Registering s new Reseller prtner There re five min steps to e new Reseller prtner. Crete your Appliction Copyright 2017 Hewlett

More information

McAfee Network Security Platform

McAfee Network Security Platform NTBA Applince T-200 nd T-500 Quick Strt Guide Revision B McAfee Network Security Pltform 1 Instll the mounting rils Position the mounting rils correctly nd instll them t sme levels. At the front of the

More information

Registering as an HPE Reseller

Registering as an HPE Reseller Registering s n HPE Reseller Quick Reference Guide for new Prtners Mrch 2019 Registering s new Reseller prtner There re four min steps to register on the Prtner Redy Portl s new Reseller prtner: Appliction

More information

How to Design REST API? Written Date : March 23, 2015

How to Design REST API? Written Date : March 23, 2015 Visul Prdigm How Design REST API? Turil How Design REST API? Written Dte : Mrch 23, 2015 REpresenttionl Stte Trnsfer, n rchitecturl style tht cn be used in building networked pplictions, is becoming incresingly

More information

Simrad ES80. Software Release Note Introduction

Simrad ES80. Software Release Note Introduction Simrd ES80 Softwre Relese 1.3.0 Introduction This document descries the chnges introduced with the new softwre version. Product: ES80 Softwre version: 1.3.0 This softwre controls ll functionlity in the

More information

Before you start to install your G-Boost cellular signal booster, please take a minute to go through the following reminders:

Before you start to install your G-Boost cellular signal booster, please take a minute to go through the following reminders: Wuhn Gewei Electronic Technologies Co., Ltd G-Boost Cellulr Signl Booster User s Mnul Wuhn Gewei Electronic Technologies Co. Ltd. Introduction Mny of us re bothered by dropped clls, slow network connections

More information

the machine and check the components Black Yellow Cyan Magenta Starter Ink Cartridges

the machine and check the components Black Yellow Cyan Magenta Starter Ink Cartridges Quick Setup Guide Strt Here DCP-J52W Thnk you for choosing Brother, your support is importnt to us nd we vlue your usiness. Your Brother product is engineered nd mnufctured to the highest stndrds to deliver

More information

LCI/USB LonWorks Commissioning Interface

LCI/USB LonWorks Commissioning Interface Works Commissioning Interfce Importnt: Retin these instructions CONTENTS 1 Unpcking... 1 2 Storing... 1 3 Instlltion... 1 4 Uninstlling the USB Drivers... 8 5 Disposl... 8 1 UNPACKING Instlltion Instructions

More information

E201 USB Encoder Interface

E201 USB Encoder Interface Dt sheet Issue 4, 24 th ugust 2015 E201 USB Encoder Interfce E201-9Q incrementl E201-9S bsolute bsolute SSI BiSS-C mode (unidirectionl) B Z Clock Dt M SLO The E201 is single chnnel USB encoder interfce

More information

POLAROID SPECTRA FULL SWITCH USER MANUAL

POLAROID SPECTRA FULL SWITCH USER MANUAL POLAROID SPECTRA FULL SWITCH USER MANUAL 1200 Front View i Sonr rnge finder b Film door relese c Film door d Film exit e Film shde f Quintic, three-element, 125mm lens g Progrmmed flsh h Photocell i Self-timer

More information

c360 Add-On Solutions

c360 Add-On Solutions c360 Add-On Solutions Functionlity Dynmics CRM 2011 c360 Record Editor Reltionship Explorer Multi-Field Serch Alerts Console c360 Core Productivity Pck "Does your tem resist using CRM becuse updting dt

More information

Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep these bags away from babies and children.

Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep these bags away from babies and children. Quick Setup Guide Strt Here DCP-8085DN Before you cn use the mchine, red this Quick Setup Guide for the correct setup nd instlltion. To view the Quick Setup Guide in other lnguges, plese visit http://solutions.rother.com/.

More information

Zenoss Resource Manager Installation Guide

Zenoss Resource Manager Installation Guide Zenoss Resource Mnger Instlltion Guide Relese 5.2.5 Zenoss, Inc. www.zenoss.com Zenoss Resource Mnger Instlltion Guide Copyright 2017 Zenoss, Inc. All rights reserved. Zenoss nd the Zenoss logo re trdemrks

More information

COMPUTER EDUCATION TECHNIQUES, INC. (MS_W2K3_SERVER ) SA:

COMPUTER EDUCATION TECHNIQUES, INC. (MS_W2K3_SERVER ) SA: In order to lern which questions hve een nswered correctly: 1. Print these pges. 2. Answer the questions. 3. Send this ssessment with the nswers vi:. FAX to (212) 967-3498. Or. Mil the nswers to the following

More information

NetBackup 5200 Release 1.1 Quick Installation Guide

NetBackup 5200 Release 1.1 Quick Installation Guide NetBckup 5200 Relese 1.1 Quick Instlltion Guide Revision: 01 Dte: 2010-08-30 Environment Check Before Instlltion You cn instll the NetBckup 5200 pplince in stndrd 19-inch cbinet (with n AC distribution

More information

Load the ribbon on the ribbon cartridge. Load the ribbon cartridge in the printer. Fan the cards, and then load them in the input hopper.

Load the ribbon on the ribbon cartridge. Load the ribbon cartridge in the printer. Fan the cards, and then load them in the input hopper. Open the printer cover. Slide the clening roller onto the clening sleeve (). Remove the protective wrp from the clening roller () nd instll the clening roller in the printer (c). Lod the rion on the rion

More information

Zenoss Core Installation Guide

Zenoss Core Installation Guide Zenoss Core Instlltion Guide Relese 5.2.1 Zenoss, Inc. www.zenoss.com Zenoss Core Instlltion Guide Copyright 2017 Zenoss, Inc. All rights reserved. Zenoss nd the Zenoss logo re trdemrks or registered trdemrks

More information

Small Business Networking

Small Business Networking Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd processes. Introducing technology

More information

Easy Interactive Tools Ver.4.2 Operation Guide

Easy Interactive Tools Ver.4.2 Operation Guide Esy Interctive Tools Ver.4.2 Opertion Guide Esy Interctive Tools Ver.4.2 Opertion Guide Esy Interctive Tools Summry 3 Fetures Esy Interctive Tools is n ppliction tht llows you to drw on projected imges.

More information

Sage CRM 2017 R3 Software Requirements and Mobile Features. Updated: August 2017

Sage CRM 2017 R3 Software Requirements and Mobile Features. Updated: August 2017 Sge CRM 2017 R3 Softwre Requirements nd Mobile Fetures Updted: August 2017 2017, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned herein re the trdemrks of The

More information

Small Business Networking

Small Business Networking Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd business. Introducing technology

More information

Zenoss Resource Manager Installation Guide

Zenoss Resource Manager Installation Guide Zenoss Resource Mnger Instlltion Guide Relese 6.1.1 Zenoss, Inc. www.zenoss.com Zenoss Resource Mnger Instlltion Guide Copyright 2018 Zenoss, Inc. All rights reserved. Zenoss, Own IT, nd the Zenoss logo

More information

Passwords Passwords Changing Passwords... <New Passwords> 130 Setting UIM PIN... <UIM PIN/UIM PIN2> 130 Unlocking a Locked UIM...

Passwords Passwords Changing Passwords... <New Passwords> 130 Setting UIM PIN... <UIM PIN/UIM PIN2> 130 Unlocking a Locked UIM... Psswords Psswords... 128 Chnging Psswords... 130 Setting UIM PIN... 130 Unlocking Locked UIM... 131 Restricting the Hndset Opertions Locking Function... 131 Locking the

More information

JCM TRAINING OVERVIEW ivizion Banknote Acceptor

JCM TRAINING OVERVIEW ivizion Banknote Acceptor ivizion Bnknote Acceptor JCM Trining Overview Februry, 2018 Februry, 2018 ivizion-100 Prts List Prt Number - Description 701-000269R ivizion/uba Power Supply 701-100112R ivizion/tbv UAC Kit (lternte power

More information

Sage CRM 2018 R1 Software Requirements and Mobile Features. Updated: May 2018

Sage CRM 2018 R1 Software Requirements and Mobile Features. Updated: May 2018 Sge CRM 2018 R1 Softwre Requirements nd Mobile Fetures Updted: My 2018 2018, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned herein re the trdemrks of The Sge

More information

pdftoolbox Server 4 Manual

pdftoolbox Server 4 Manual pdftoolbox Server 4 Mnul Mnul Pge 2 Mnul Lst modified: 27 Februry 2009 2009 by clls softwre gmbh, Berlin, Germny All rights reserved All trdemrks re the property of their respective owners. Mnul Pge Content

More information

User Reference Guide. CE875 Instant Issuance System. July EN, Rev E

User Reference Guide. CE875 Instant Issuance System. July EN, Rev E User Reference Guide CE875 Instnt Issunce System July 2018 527763-001EN, Rev E Contents The CE875 Instnt Issunce System Contents The CE875 Instnt Issunce System...3 The Printer with Optionl Multi-Hopper...4

More information

Enginner To Engineer Note

Enginner To Engineer Note Technicl Notes on using Anlog Devices DSP components nd development tools from the DSP Division Phone: (800) ANALOG-D, FAX: (781) 461-3010, EMAIL: dsp_pplictions@nlog.com, FTP: ftp.nlog.com Using n ADSP-2181

More information

Migrating vrealize Automation to 7.3 or March 2018 vrealize Automation 7.3

Migrating vrealize Automation to 7.3 or March 2018 vrealize Automation 7.3 Migrting vrelize Automtion to 7.3 or 7.3.1 15 Mrch 2018 vrelize Automtion 7.3 You cn find the most up-to-dte technicl documenttion on the VMwre website t: https://docs.vmwre.com/ If you hve comments bout

More information

Small Business Networking

Small Business Networking Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd business. Introducing technology

More information

McAfee Network Security Platform

McAfee Network Security Platform Revision D McAfee Network Security Pltform (NS5x00 Quick Strt Guide) This quick strt guide explins how to quickly set up nd ctivte your McAfee Network Security Pltform NS5100 nd NS5200 Sensors in inline

More information

Small Business Networking

Small Business Networking Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd processes. Introducing technology

More information

Small Business Networking

Small Business Networking Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd business. Introducing technology

More information

Dixie Narco Retrofit Kit

Dixie Narco Retrofit Kit PERSONAL NOTES AND COMMENT AREA Write ny pertinent notes or comments regrding your prticulr instlltion here. Optipy BV/RC/CC into Pepsi Vending Mchine This document contins informtion for instlling nd

More information

LINX MATRIX SWITCHERS FIRMWARE UPDATE INSTRUCTIONS FIRMWARE VERSION

LINX MATRIX SWITCHERS FIRMWARE UPDATE INSTRUCTIONS FIRMWARE VERSION Overview LINX MATRIX SWITCHERS FIRMWARE UPDATE INSTRUCTIONS FIRMWARE VERSION 4.3.1.0 Due to the complex nture of this updte, plese fmilirize yourself with these instructions nd then contct RGB Spectrum

More information

Before you can use the machine, read this Quick Setup Guide for the correct setup and installation.

Before you can use the machine, read this Quick Setup Guide for the correct setup and installation. Quick Setup Guide Strt Here MFC-5490CN Before you cn use the mchine, red this Quick Setup Guide for the correct setup nd instlltion. WARNING Wrnings tell you wht to do to prevent possile personl injury.

More information

Document Camera User's Guide

Document Camera User's Guide Document Cmer User's Guide Mening of Symbols in the Guide Symbols for Sfety The documenttion nd this product use grphicl symbols to show how to use this product sfely. The indictions nd their mening re

More information

Easy Interactive Tools Ver.4.1 Operation Guide

Easy Interactive Tools Ver.4.1 Operation Guide Esy Interctive Tools Ver.4.1 Opertion Guide Esy Interctive Tools Ver.4.1 Opertion Guide Esy Interctive Tools Summry 3 Fetures Esy Interctive Tools is n ppliction tht llows you to drw on projected imges.

More information

vcloud Director Tenant Portal Guide vcloud Director 9.1

vcloud Director Tenant Portal Guide vcloud Director 9.1 vcloud Director Tennt Portl Guide vcloud Director 9.1 You cn find the most up-to-dte technicl documenttion on the VMwre website t: https://docs.vmwre.com/ If you hve comments bout this documenttion, submit

More information

Sage CRM 2017 R2 Software Requirements and Mobile Features. Revision: IMP-MAT-ENG-2017R2-2.0 Updated: August 2017

Sage CRM 2017 R2 Software Requirements and Mobile Features. Revision: IMP-MAT-ENG-2017R2-2.0 Updated: August 2017 Sge CRM 2017 R2 Softwre Requirements nd Mobile Fetures Revision: IMP-MAT-ENG-2017R2-2.0 Updted: August 2017 2017, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned

More information

Zenoss Core Installation Guide

Zenoss Core Installation Guide Zenoss Core Instlltion Guide Relese 6.1.0 Zenoss, Inc. www.zenoss.com Zenoss Core Instlltion Guide Copyright 2018 Zenoss, Inc. All rights reserved. Zenoss, Own IT, nd the Zenoss logo re trdemrks or registered

More information

Small Business Networking

Small Business Networking Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd processes. Introducing technology

More information

Media Player Using Media Player Downloading Media Files Playing Music Playing Movie Using Playlist...

Media Player Using Media Player Downloading Media Files Playing Music Playing Movie Using Playlist... Using... -2 Downloding Medi Files... -3 Downloding Music & Movies...-3 Sving Medi Files to Phone/Memory Crd...-3 Plying Music... -3 Music Window...-4 Plying Music...-4 Plying Movie... -5 Movie Window...-6

More information

E201 USB Encoder Interface

E201 USB Encoder Interface Dt sheet Issue 3, 14 th July 2014 E201 USB Encoder Interfce E201-9Q - incrementl E201-9S - bsolute bsolute SSI BiSS-C mode (unidirectionl) B Z Clock Dt M SLO The E201 is single chnnel USB encoder interfce

More information

QEL 33A/35A, 98/99 Series

QEL 33A/35A, 98/99 Series *24908394* 24908394 Bseplte Conversion Kit QEL 33A/35A, 98/99 Series Instlltion Instructions 1. This kit converts ll 33/35A nd 98/99 series EL devices nd fire devices uilt prior to Oct. 2014 to quiet electric

More information

Royal RVHV Retrofit Kit

Royal RVHV Retrofit Kit Optipy BV/RC/CC into Royl Vending Mchine This document contins informtion for instlling nd configuring the JCM Optipy DBV-01 Bill Vlidtor, RC-10 Bill Recycler nd A-66 Coin Chnger into Royl RVHV 768-12

More information

Small Business Networking

Small Business Networking Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd processes. Introducing technology

More information

Zenoss Resource Manager Installation Guide

Zenoss Resource Manager Installation Guide Zenoss Resource Mnger Instlltion Guide Relese 5.3.0 Zenoss, Inc. www.zenoss.com Zenoss Resource Mnger Instlltion Guide Copyright 2017 Zenoss, Inc. All rights reserved. Zenoss, Own IT, nd the Zenoss logo

More information

JCM TRAINING OVERVIEW DBV Series DBV-500 Banknote Validator

JCM TRAINING OVERVIEW DBV Series DBV-500 Banknote Validator November, 2016 JCM TRAINING OVERVIEW DBV Series DBV-500 Bnknote Vlidtor Phone (800) 683-7248 (702) 651-0000 Fx (702) 651-0214 E-mil support@jcmglobl.com www.jcmglobl.com 1 DBV-500 Bnknote Vlidtor Tble

More information

Getting Started Guide

Getting Started Guide Lser Bem Printer Getting Strted Guide Red this mnul first nd retin for future reference. Contents LASER SHOT LBP5970 Getting Strted Guide Prefce... 2 System Configurtion Requirements for Using User Mnul

More information

McAfee Network Security Platform

McAfee Network Security Platform 10/100/1000 Copper Active Fil-Open Bypss Kit Guide Revision E McAfee Network Security Pltform This document descries the contents nd how to instll the McAfee 10/100/1000 Copper Active Fil-Open Bypss Kit

More information

Before you can use the machine, read this Quick Setup Guide for the correct setup and installation.

Before you can use the machine, read this Quick Setup Guide for the correct setup and installation. Quick Setup Guide Strt Here MFC-5490CN Before you cn use the mchine, red this Quick Setup Guide for the correct setup nd instlltion. WARNING Wrnings tell you wht to do to prevent possile personl injury.

More information

Zenoss Resource Manager Installation Guide

Zenoss Resource Manager Installation Guide Zenoss Resource Mnger Instlltion Guide Relese 5.3.2 Zenoss, Inc. www.zenoss.com Zenoss Resource Mnger Instlltion Guide Copyright 2017 Zenoss, Inc. All rights reserved. Zenoss, Own IT, nd the Zenoss logo

More information

Small Business Networking

Small Business Networking Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd business. Introducing technology

More information

TECHNICAL NOTE MANAGING JUNIPER SRX PCAP DATA. Displaying the PCAP Data Column

TECHNICAL NOTE MANAGING JUNIPER SRX PCAP DATA. Displaying the PCAP Data Column TECHNICAL NOTE MANAGING JUNIPER SRX PCAP DATA APRIL 2011 If your STRM Console is configured to integrte with the Juniper JunOS Pltform DSM, STRM cn receive, process, nd store Pcket Cpture (PCAP) dt from

More information

Agilent Mass Hunter Software

Agilent Mass Hunter Software Agilent Mss Hunter Softwre Quick Strt Guide Use this guide to get strted with the Mss Hunter softwre. Wht is Mss Hunter Softwre? Mss Hunter is n integrl prt of Agilent TOF softwre (version A.02.00). Mss

More information

McAfee Network Security Platform

McAfee Network Security Platform NS7x00 Quick Strt Guide Revision D McAfee Network Security Pltform This quick strt guide explins how to quickly set up nd ctivte your McAfee Network Security Pltform NS7100, NS7200, nd NS7300 Sensors in

More information

Zenoss Service Impact Installation and Upgrade Guide for Resource Manager 5.x and 6.x

Zenoss Service Impact Installation and Upgrade Guide for Resource Manager 5.x and 6.x Zenoss Service Impct Instlltion nd Upgrde Guide for Resource Mnger 5.x nd 6.x Relese 5.3.1 Zenoss, Inc. www.zenoss.com Zenoss Service Impct Instlltion nd Upgrde Guide for Resource Mnger 5.x nd 6.x Copyright

More information

Neo-Flex Mobile Work Space

Neo-Flex Mobile Work Space www.ergotron.com Neo-Flex Moile Work Spce ASSEMBLY INSTRUCTIONS 5" LCD lift CPU Holder FEATURES 20" Verticl Lift Ergonomic rer hndle Scnner holder rcket Integrted, worksurfce/keyord try with left/right

More information

Troubleshooting Guide

Troubleshooting Guide IBM System Storge SAN Volume Controller Troubleshooting Guide GC27-2284-06 Note Before using this informtion nd the product it supports, red the informtion in Notices on pge 351. This edition pplies to

More information

Printer Specifications

Printer Specifications Chrcter fonts: Pper guide Poum cord Printer Specifictions Printing Printing method: Pcin ting spud: ulity High-speed drtt Drl! Printer Ribbon crtridgr 2Cpin impct dot mtrix Chwctvs prr Inch 10 10 Chu8ctemlncondllin*

More information

IBM System Storage SAN Volume Controller. Troubleshooting Guide IBM

IBM System Storage SAN Volume Controller. Troubleshooting Guide IBM IBM System Storge SAN Volume Controller Troubleshooting Guide IBM Note Before using this informtion nd the product it supports, red the informtion in Notices on pge 309. This edition pplies to version

More information

OPERATION MANUAL. DIGIFORCE 9307 PROFINET Integration into TIA Portal

OPERATION MANUAL. DIGIFORCE 9307 PROFINET Integration into TIA Portal OPERATION MANUAL DIGIFORCE 9307 PROFINET Integrtion into TIA Portl Mnufcturer: 2018 burster präzisionsmesstechnik gmbh & co kg burster präzisionsmesstechnik gmbh & co kg Alle Rechte vorbehlten Tlstrße

More information

Allocator Basics. Dynamic Memory Allocation in the Heap (malloc and free) Allocator Goals: malloc/free. Internal Fragmentation

Allocator Basics. Dynamic Memory Allocation in the Heap (malloc and free) Allocator Goals: malloc/free. Internal Fragmentation Alloctor Bsics Dynmic Memory Alloction in the Hep (mlloc nd free) Pges too corse-grined for llocting individul objects. Insted: flexible-sized, word-ligned blocks. Allocted block (4 words) Free block (3

More information

Small Business Networking

Small Business Networking Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd processes. Introducing technology

More information