Avaya Visual Vectors Release 13 User Guide

Transcription

1 Avaya Visual Vectors Release 13 User Guide Issue 1.0 May 2005

2 2005 Avaya Inc. All Rights Reserved. Notice While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Avaya Inc. can assume no liability for any errors. Changes and corrections to the information in this document may be incorporated in future releases. Documentation disclaimer Avaya Inc. is not responsible for any modifications, additions, or deletions to the original published version of this documentation unless such modifications, additions, or deletions were performed by Avaya. Customer and/or End User agree to indemnify and hold harmless Avaya, Avaya's agents, servants and employees against all claims, lawsuits, demands and judgments arising out of, or in connection with, subsequent modifications, additions or deletions to this documentation to the extent made by the Customer or End User. Link disclaimer Avaya Inc. is not responsible for the contents or reliability of any linked Web sites and does not necessarily endorse the products, services, or information described or offered within them. We cannot guarantee that these links will work all of the time and we have no control over the availability of the linked pages. Warranty Avaya Inc. provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited warranty. In addition, Avaya s standard warranty language, as well as information regarding support for this product, while under warranty, is available through the following Web site: Preventing toll fraud "Toll fraud" is the unauthorized use of your telecommunications system by an unauthorized party (for example, anyone who is not a corporate employee, agent, subcontractor, or person working on your company's behalf). Be aware that there may be a risk of toll fraud associated with your system and that, if toll fraud occurs, it can result in substantial additional charges for your telecommunications services. Avaya fraud intervention If you suspect that you are being victimized by toll fraud and you need technical assistance or support, call Technical Service Center Toll Fraud Intervention Hotline at for the United States and Canada. For additional support telephone numbers, see the Avaya Web site: Providing telecommunications security Telecommunications security (of voice, data, and video communications) is the prevention of any type of intrusion to (that is, either unauthorized or malicious access to or use of) your company's telecommunications equipment by some party. Your company's "telecommunications equipment" includes both this Avaya product and any other voice/data/video equipment that could be accessed via this Avaya product (that is, "networked equipment"). An "outside party" is anyone who is not a corporate employee, agent, subcontractor, or person working on your company's behalf. Whereas, a "malicious party" is anyone (including someone who may be otherwise authorized) who accesses your telecommunications equipment with either malicious or mischievous intent. Such intrusions may be either to/through synchronous (time-multiplexed and/or circuit-based) or asynchronous (character-, message-, or packet-based) equipment or interfaces for reasons of: Use (of capabilities special to the accessed equipment) Theft (such as, of intellectual property, financial assets, or toll-facility access) Eavesdropping (privacy invasions to humans) Mischief (troubling, but apparently innocuous, tampering) Harm (such as harmful tampering, data loss or alteration, regardless of motive or intent) Be aware that there may be a risk of unauthorized intrusions associated with your system and/or its networked equipment. Also realize that, if such an intrusion should occur, it could result in a variety of losses to your company (including, but not limited to, human and data privacy, intellectual property, material assets, financial resources, labor costs, and legal costs). Your responsibility for your company's telecommunications security The final responsibility for securing both this system and its networked equipment rests with you, an Avaya customer's system administrator, your telecommunications peers, and your managers. Base the fulfillment of your responsibility on acquired knowledge and resources from a variety of sources, including, but not limited to: Installation documents System administration documents Security documents Hardware-/software-based security tools Shared information between you and your peers Telecommunications security experts To prevent intrusions to your telecommunications equipment, you and your peers should carefully program and configure: Your Avaya-provided telecommunications systems and their interfaces Your Avaya-provided software applications, as well as their underlying hardware/software platforms and interfaces Any other equipment networked to your Avaya products. Trademarks Avaya is a trademark of Avaya Inc. All non-avaya trademarks are the property of their respective owners. Document ordering information: Avaya Publications Center Voice: (Toll-free, U.S. and Canada only) Fax: (Toll-free, U.S. and Canada only) Write: Globalware Solutions 200 Ward Hill Avenue Haverhill, MA USA Attention: Avaya Account Manager Web: totalware@gwsmail.com Order: Document No , Issue 1.0 May 2005 For the most current versions of documentation, go to the Avaya support Web site: COMPAS This document is also available from the COMPAS database. The COMPAS ID for this document is Avaya support Avaya provides a telephone number for you to use to report problems or to ask questions about your contact center. The support telephone number is in the United States. For additional support telephone numbers, see the Avaya Web site:

3 Avaya Visual Vectors Release 13 User Guide Contents Preface Intended audience Reason for reissue Availability Related documentation Change description Software documents Administration documents Hardware documents Call Center documents Avaya CMS upgrade documents Base load upgrades Platform upgrades and data migration Avaya Call Management System Upgrade Express (CUE) Documentation Web sites Support Introduction General information What is Visual Vectors software? Supported switches and capacities Single and multiple ACDs Supported switch capacities Prerequisite switch and CMS features ACD administration and Visual Vectors Call Vectoring and Visual Vectors Things to know before using Visual Vectors Interactions with CMS Supervisor Interactions with CMS Things to know about call center data How CMS stores and tracks ACD data Technical Support Setting up the My World objects directory Introduction to the My World objects directory My World directory features Connecting to a CMS server Issue 1.0 May

4 Contents Connection types Connecting to an existing server Connecting to a new CMS server Managing objects in the My World directory Selecting objects Adding objects Deleting objects Procedure Getting information Deleting an object Renaming objects Getting information Doing the renaming Changing other object properties My World objects Defining My World objects My World object ScratchPad object CMS object ACD object Announcement Folder object Announcement object Split/Skill Folder object Split/Skill object Trunk Group Folder object Trunk Group object Vector Folder object Vector object VDN Folder object VDN object My World object properties Defining object properties My World object ScratchPad object CMS object ACD object Announcement Folder object Announcement object Split/Skill Folder object Split/Skill object Trunk Group Folder object Trunk Group object Vector Folder object Vector object VDN Folder object VDN object Using Visual Vectors Framework Introduction to Visual Vectors Framework Avaya Visual Vectors R13 User Guide

5 Contents Features of Visual Vectors Framework Connecting to CMS servers Logging in to an existing server Logging in to a new server Disconnecting from CMS servers Framework window objects Title bar Minimize, Maximize/Restore, and Close buttons Toolbar Status bar Menu bar File menu Tools Menu Window menu Help menu Using Navigator Introduction to Navigator Features of Navigator Navigator window objects Status indicators Status messages Using the Vector Editor Introduction to the Vector Editor Vector Editor features Opening and closing the Vector Editor Vector Editor window objects Using Vector Editor windows Accessing vectors Methods used to access vectors Accessing vectors from Navigator Accessing vectors from Vector Editor Saving and printing vectors Procedure Saving vectors in Navigator Printing vector graphics Using vector steps Vector step palettes Vector step properties Announcement (Input/Output) step properties Timed Announcement (Input/Output) step properties Music (Input/Output) step properties Ringback (Input/Output) step properties Silence (Input/Output) step properties Reply (Input/Output) step properties Consider (Input/Output) step properties Collect (Input/Output) step properties Issue 1.0 May

6 Contents Converse (Input/Output) step properties Busy (End) step properties Stop (End) step properties Disconnect (End) step Caller Info (Test) step properties Center Info (Test) step properties Queue Activity (Test) step properties Agent Activity (Test) step properties Time Of Day (Test) step properties Holiday (Test) step properties Queue Activity (Queue) step properties Center Info (Queue) step properties Agent Activity (Queue) step properties Queue Unconditional (Queue) step properties Route To Number (Routing) step properties Route To Digits (Routing) step properties Adjunct Route (Routing) step properties Messaging Skill (Routing) step properties Goto Vector (Routing) step Creating a new Goto vector Disconnecting weekend calls Selecting ringback Routing callers Playing an announcement Moving or copying vectors to ACDs of different types Procedure Using the VDN Assignment Wizard Introduction to the VDN Assignment Wizard Features of the VDN Assignment Wizard Starting the VDN Assignment Wizard VDN Assignment Wizard window objects Title bar Minimize, maximize/restore and close buttons Buttons Using VDN Assignment windows Assigning VDNs Accessing the VDN Assignment Wizard Using the Available for Selection window Using the Edit Assignment window Using the Import Export Wizard Introduction to the Import Export Wizard Features of the Import Export Wizard Starting the Import Export Wizard Import Export Wizard objects Title bar Minimize, maximize/restore and close buttons Buttons Avaya Visual Vectors R13 User Guide

7 Contents Importing and exporting vectors Exporting Vectors Accessing the Import Export Wizard Using the Available for Selection window Using the Archive File and Export Summary windows Importing vectors Accessing the Import Export Wizard Using the Available for Selection and Summary windows Troubleshooting Troubleshooting FAQ Installing and uninstalling Visual Vectors Importance of the HOME variable Startup Connectivity Navigator Vector Editor VDN Assignment Wizard Avaya Supervisor integration Performance issues Miscellaneous issues General computer issues Glossary Index Issue 1.0 May

8 Contents 8 Avaya Visual Vectors R13 User Guide

9 Preface This Avaya Visual Vectors User Guide is written primarily for the Avaya Call Management System (CMS) administrator who has access to all areas on one or more CMS servers, and secondarily, for auxiliary administrators and split/skill supervisors who have limited access to Vectors and Vector Directory Numbers. This section includes the following topics: Intended audience on page 9 Reason for reissue on page 10 Availability on page 10 Related documentation on page 11 Support on page 15 Intended audience This guide is intended for individuals who use Avaya Visual Vectors to manage and create various types of switch objects in a call center network. It assumes that you are familiar with: The operation of your computer and the Microsoft Windows operating system that is installed on it. Windows versions that are compatible with Visual Vectors include Windows 95, Windows 98, Windows 2000, Windows NT 4.0, Windows ME, and Windows XP. Important: Avaya! Important: does not provide technical support for Visual Vectors on Windows 95 systems. Installation of Visual Vectors on Windows 95 systems is permissive. This means that it may be possible to install and run the Visual Vectors client software on Windows 95 systems. However, if technical problems occur, upgrade of the client operating system to a fully supported Windows platform is required. The operation of communication servers and the Avaya Call Management System. Issue 1.0 May

10 Preface Reason for reissue This document is being reissued to note that the Visual Vectors client was last updated to be compatible with vector enhancements through Avaya Communication Manager 1.x. Any vectoring enhancements since Communication Manager 1.x are not accessible using the Visual Vectors client. Availability Copies of this document are available from one or both of the following sources: Note: Although there is no charge to download documents through the Avaya Web site, documents ordered from the Avaya Publications Center must be purchased. The Avaya online support Web site, The Avaya Publications Center, which you can contact by: Voice: (Toll-free, U.S. and Canada only) Note: Fax: (Toll-free, U.S. and Canada only) Mail: GlobalWare Solutions 200 Ward Hill Avenue Haverhill, MA USA Attention: Avaya Account Manager 10 Avaya Visual Vectors R13 User Guide

11 Related documentation Related documentation You might find the following Avaya CMS documentation useful. This section includes the following topics: Change description on page 11 Software documents on page 11 Administration documents on page 12 Hardware documents on page 12 Call Center documents on page 12 Avaya CMS upgrade documents on page 13 Documentation Web sites on page 14 Change description For information about the changes made in Avaya CMS R13, see: Avaya Call Center 3.0 and Call Management System (CMS) Release 13 Change Description, Software documents For more information about Avaya CMS software, see: Avaya Call Management System Release 13 Software Installation, Maintenance, and Troubleshooting Guide, Avaya CMS Open Database Connectivity Version 4.2, Avaya Call Management System Release 13 LAN Backup User Guide, Avaya Call Management System Release 13 External Call History Interface, Avaya CMS Custom Reports, Avaya CMS Forecast User Guide, Avaya Visual Vectors Release 13 Installation and Getting Started, Avaya Visual Vectors Release 13 User Guide, Avaya Call Management System (CMS) Supervisor Release 13 Report Designer, Issue 1.0 May

12 Preface Administration documents For more information about Avaya CMS administration, see: Avaya Call Management System Release 13 Administration, Avaya Call Management System (CMS) Release 13 Database Items and Calculations, Avaya Call Management System Supervisor Release 13 Reports, Avaya Call Management System (CMS) Supervisor Release 13 Installation and Getting Started, Avaya Call Management System High Availability User Guide, Avaya Call Management System High Availability Connectivity, Upgrade and Administration, Hardware documents For more information about Avaya CMS hardware, see: Avaya Call Management System Sun Fire V880/V890 Computer Hardware Installation, Maintenance, and Troubleshooting, Avaya Call Management System Sun Blade 100/150 Workstation Hardware Installation, Maintenance, and Troubleshooting, Avaya Call Management System Terminals, Printers, and Modems, Call Center documents For more information about Avaya Call Center documents, see: Avaya Communication Manager Call Center Software Basic Call Management System (BCMS) Operations, Avaya Call Management System Switch Connections, Administration, and Troubleshooting, Avaya Communication Manager Call Center Software Call Vectoring and Expert Agent Selection (EAS) Guide, Avaya Communication Manager Call Center Software Automatic Call Distribution (ACD) Guide, Avaya Business Advocate User Guide, Avaya Visual Vectors R13 User Guide

13 Related documentation Avaya CMS upgrade documents There are several upgrade paths supported with Avaya CMS. There is a document designed to support each upgrade. This section includes the following topics: Base load upgrades on page 13 Platform upgrades and data migration on page 13 Avaya Call Management System Upgrade Express (CUE) on page 13 Base load upgrades Use a base load upgrade when upgrading CMS to the latest load of the same version (for example, r13ak.g to r13al.k). A specific set of instructions is written for the upgrade. The instructions are shipped to the customer site with the CMS software CD-ROM as part of a Product Correction Notice (PCN). For more information about base load upgrades, see: Avaya Call Management System Release 13 Base Load Upgrade Platform upgrades and data migration Use a platform upgrade when upgrading to a new hardware platform (for example, upgrading from a SPARCserver 5 to a Sun Blade 150). The new hardware platform is shipped from the Avaya factory with the latest CMS load. Therefore, as part of the upgrade you will have the latest CMS load (for example, R3V9 to R13). For more information about platform upgrades and data migration, see: Avaya Call Management System Release 13 Platform Upgrade and Data Migration, Avaya Call Management System Upgrade Express (CUE) Use CUE when CMS is being upgraded from an earlier version (for example, R3V9) to the latest version (for example, R13). A specific set of upgrade instructions is written for the upgrade. These instructions are included on the CUE software CD-ROM that is shipped to the customer site with the CUE kit. For information about customer requirements for CUE upgrades, see: Avaya Call Management System Release 13 CMS Upgrade Express (CUE) Customer Requirements, Issue 1.0 May

14 Preface For information about CUE upgrade procedures, see: Avaya Call Management System Release 13 Sun Blade 100/150 Workstation Mirrored and Nonmirrored Systems CMS Upgrade Express (CUE), Avaya Call Management System Release 13 Sun Fire V880/V890 Computer CMS Upgrade Express (CUE), Documentation Web sites For Avaya product documentation, go to Additional information about new software or hardware updates will be contained in future issues of this book. New issues of this book will be placed on the Web site when available. Use the following Web sites to view related support documentation: Information about Avaya products and service Sun hardware documentation Informix documentation Tivoli Storage Manager documentation 14 Avaya Visual Vectors R13 User Guide

15 Support Support Contacting Avaya technical support Avaya provides support telephone numbers for you to report problems or ask questions about your product. For United States support: For international support: See the Support Directory listings on the Avaya Web site. Escalating a technical support issue Avaya Global Services Escalation Management provides the means to escalate urgent service issues. For more information, see the Escalation Management listings on the Avaya Web site. Issue 1.0 May

16 Preface 16 Avaya Visual Vectors R13 User Guide

17 Introduction This Avaya Visual Vectors User Guide gives you the information you need to use the Visual Vectors client software package. This chapter includes the following sections: General information on page 17 Things to know before using Visual Vectors on page 20 Things to know about call center data on page 22 Technical Support on page 23 General information This section presents a brief overview of what the software does, who uses it, and how it works, followed by an overview of supporting hardware and software. This section includes the following information: What is Visual Vectors software? on page 18 Supported switches and capacities on page 18 Prerequisite switch and CMS features on page 19 Issue 1.0 May

18 Introduction What is Visual Vectors software? Avaya Call Management System (CMS) is a software product for businesses and organizations who receive a large volume of telephone calls that are processed through the Automatic Call Distribution (ACD) and Call Vectoring features of an Avaya communication server. CMS servers collects call-traffic data, formats management reports, and provides an administrative interface to the ACD feature on the switch. The CMS administrator can access the CMS database, generate reports, administer ACD parameters, and also monitor call activities to determine the most efficient service possible for the customers. The CMS server supports Avaya CMS Supervisor client computers. The Visual Vectors Server software is installed on the same server as the CMS software. The Visual Vector Server software supports Visual Vectors client software installed on PC workstations. Using the client software, administrators can change certain properties of call center entities, as well as create and edit vectors, assign Vector Directory Numbers (VDNs) to vectors, and set VDN Skill Preferences. Supported switches and capacities Single and multiple ACDs Depending on which server you have and how the CMS software was installed, the CMS software can communicate with as many as eight ACDs. Depending on how the Visual Vectors Server software was installed and configured, the Visual Vectors V11 client software can communicate with as many as 20 CMS servers. References to multiple ACDs in this document refer to configurations with multiple switches. If you have only one switch, you can ignore the considerations for multiple ACDs. Supported switch capacities Visual Vectors supports the following capacity increases introduced in Avaya Communication Manager 1.x: 2000 trunk groups per ACD 8000 trunk groups per CMS 3000 announcements per ACD The Visual Vectors client was last updated to be compatible with vector enhancements through Avaya Communication Manager 1.x. Any enhancements since Communication Manager 1.x are not accessible using the Visual Vectors client. 18 Avaya Visual Vectors R13 User Guide

19 General information Prerequisite switch and CMS features CMS includes a feature for administering automatic call distribution (ACD) and optional features for managing aspects of the system. The features required to use Visual Vectors software are described below. ACD administration and Visual Vectors CMS and Visual Vectors software provide an administrative interface to the switch. The CMS software supports CMS Supervisor clients. Using the Agent Administration and Call Center Administration areas, you can use Supervisor to view or change various parameters on the switch that are related to ACD, Vectoring, and Expert Agent Selection (EAS). You can also run reports that describe your call center configuration. For example, you can: Add agents to or remove agents from splits or skills Move extensions between splits Change skill assignments Change the following assignments: trunk group-to-split, trunk group-to-vdn, VDN-to-vector Start an agent trace and list the agents being traced Using Visual Vectors client software, administrators can change certain properties of call center entities, as well as create and edit vectors, assign VDNs to vectors, and set VDN Skill Preferences. The Visual Vectors administrator should coordinate with the switch administrator to be sure that the needed ACD and CMS configurations are understood by both administrator. Call Vectoring and Visual Vectors The Avaya Call Vectoring feature enables you to create, copy, and edit vectors on any supported communication servers. Call vectors direct calls to specified on-network or off-network destinations, to queues in ACD splits, or to treatments such as music, recorded announcements, forced disconnect, and forced busy. Visual Vectors provides an intuitive graphical user interface for the Call Vectoring feature. Issue 1.0 May

20 Introduction Things to know before using Visual Vectors This section describes the interactions of Visual Vectors software with other call center client software. This section includes the following information: Interactions with CMS Supervisor on page 20 Interactions with CMS on page 21 Interactions with CMS Supervisor Visual Vectors software is designed to work with CMS Supervisor Version 6 or later. If CMS Supervisor Version 6 or later is correctly installed on your client computer, the Visual Vectors Framework window displays a toolbar icon which you can use to start Supervisor. You can also select Supervisor from the Tools menu. Although you may be able to run Supervisor from Visual Vectors, the two software programs do not interact directly. If information from the two programs does not seem to match, first try to log off the CMS server in each program, and then log back on. This will cause Supervisor to read the configuration file in Visual Vectors and respond with the correct information. Using CMS Supervisor - Use Supervisor software to do the following: Generate reports on the VDNs, vectors, and skill preferences you assigned using Visual Vectors tools Assign names to splits or skills, trunk groups, ACDs, Vectors, and VDNs in the CMS Dictionary, so that the objects in your My World directory of objects. If CMS Supervisor Version 8 or later is installed, there will be a Visual Vectors icon on the CMS Supervisor toolbar. 20 Avaya Visual Vectors R13 User Guide

21 Things to know before using Visual Vectors Interactions with CMS Visual Vectors software is designed to work with CMS R3V6 or later. Interactions with CMS - If information obtained from the two client software programs does not seem to match, log off the CMS server from each client software program, and then log back on. This will cause the CMS server software to read the configuration file in Visual Vectors and respond with the correct information. Important:! Important: Edit vectors only in Visual Vectors. If you use any other way to edit vectors, such as a CMS terminal, the vector step comments will be converted to floating comments. Issue 1.0 May

22 Introduction Things to know about call center data This section describes the Avaya CMS processes for storing and tracking switch data for your call center. The information is intended to give you an overview of how CMS works, where CMS stores data, and how Visual Vectors Server software accesses CMS Dictionary and User Permissions data. This section includes the following information: How CMS stores and tracks ACD data on page 22 How CMS stores and tracks ACD data Real-time and historical databases - CMS stores the ACD data that is received from the switch in the real-time and historical databases. Within each of these databases, CMS stores the specific ACD data for agents, splits or skills, trunks, trunk groups, vectors, and VDNs in separate database tables. Call work codes (CWC) also have separate database tables in the real-time and historical database. Summarizing CMS data - As CMS collects the real-time data from the ACD, the data is stored in the current intrahour interval tables (agent, split/skill, trunk, trunk group, vector, and VDN) until the end of the interval. At the end of the current intrahour interval, data is archived to the previous intrahour interval tables and to the intrahour historical tables. At the time that you designate, the historical intrahour data is summarized into daily data. At the end of your designated week, which is specified on the System Setup subsystem Storage Intervals window, the daily data is summarized into weekly data. On the first day of a new month, monthly summaries are generated from the daily data for the previous month. CMS Dictionary - The CMS Dictionary contains names for call center ACDs and their entities, including announcements, splits or skills, trunk groups, VDNs, and vectors. The assigned names appear on CMS reports to make them easier to interpret, as well as in Visual Vectors software to make it easier to use. You can use Visual Vectors tools to rename entities, or edit certain other properties of those entities. User permissions - Visual Vectors software determines what users can view and modify based on CMS User Permissions. For example, if a user has read access for an ACD and/ or its vectors but does not have write access, the user is not able to save or copy a vector to that ACD. Likewise, if a user does not have read or write access permissions for a certain type of entity, for example, VDNs, the folder for those entities on the ACD appears empty in Navigator. 22 Avaya Visual Vectors R13 User Guide

23 Technical Support Technical Support If you have a problem - If you have a problem with Visual Vectors, first consult the following: Help Contents and alphabetical Index The readme.txt file that is delivered with the software Important:! Important: The readme.txt file includes late-breaking changes to and news about the software. Use a text editor such as Notepad to read the file. Information to provide the system administrator - If these sources do not contain answers to your questions, contact your CMS system administrator. The system administrator may need information from you: The version installed on your PC (select the About... item from the Help Menu and note the load number in the upper-right corner). The name or IP address of your CMS server (the system administrator will know the version and load of CMS installed on your server). The type of connection you have to the server (serial or over a network). The manufacturer and model of your PC, as well as the amount of RAM installed. Issue 1.0 May

24 Introduction 24 Avaya Visual Vectors R13 User Guide

25 Setting up the My World objects directory This chapter explains how to set up the My World objects directory that is displayed in Navigator. It includes the following sections: Introduction to the My World objects directory on page 25 Managing objects in the My World directory on page 28 Introduction to the My World objects directory This section provides an introduction to My World features and explains how to connect to a new CMS server or add a new CMS server to the My World directory. This section includes the following information: My World directory features on page 25 Connecting to a CMS server on page 26 My World directory features Visual Vectors handles all call center network entities as objects. An object is a set of computer instructions with properties you define. This chapter explains how to perform actions on objects in the My World objects directory, including how to select objects, rename objects, delete objects, and so forth. ACD folders - Each CMS object in the My World directory can contain as many as eight ACD objects, each of which contains entity folders for announcements, split or skill objects, trunk groups, VDNs, and vectors. Issue 1.0 May

26 Setting up the My World objects directory Connecting to a CMS server Connection types You can use the Connect menu item or toolbar button to log in to a CMS server. From the Visual Vectors Framework menu, you can connect to one or more existing CMS servers or you can add a new CMS server. You are limited to one instance of a login ID per server. Connecting to an existing server To establish a CMS connection when the server is already listed in the My World directory of objects: 1. Do one of the following: Select Connect from the File menu or click the Connect icon on the toolbar. Select a CMS server in the My World objects directory from the Connect to server: drop-down list. The Connect to server window appears. 2. Enter your CMS login Id and password. 3. Click Connect. The system displays a status message that indicates that the software is connecting to the CMS server. Connecting to a new CMS server To establish a connection with a new CMS server that is not already listed in the My World objects directory: 1. Do one of the following: In the Visual Vectors Framework window, select Connect from the File menu. In the Navigator window, highlight My World in the left-hand pane, and then select New CMS from the File menu or shortcut menu, or click New in the Navigator toolbar. The system displays the New CMS window. 2. Enter the following information: In the Server Network Address: field, enter the hostname or IP address of a CMS server In the Login Id: field, enter your CMS login ID 26 Avaya Visual Vectors R13 User Guide

27 Introduction to the My World objects directory in the Password: field, enter your CMS password 3. Click OK. If the CMS server you entered: Exists and can be connected to, a new CMS object is added to the My World directory and you are connected to this new server. If the connection is broken or dropped while you are working with tools, you will be prompted to save online open vectors elsewhere. Does not exist or cannot be connected to, an error message is displayed showing the cause of the failure. Issue 1.0 May

28 Setting up the My World objects directory Managing objects in the My World directory This section describes how to manage objects in the My World directory. This section includes the following information: Selecting objects on page 28 Adding objects on page 29 Deleting objects on page 30 Renaming objects on page 31 Changing other object properties on page 32 Selecting objects To perform any action on an object in the My World directory, you must first select the object. To select an object, choose either of the following methods: Click the object. Use the arrow keys to highlight the item and then press Enter. Input window actions - The following table describes the features of the input window. Feature Menu bar Toolbar action buttons Input fields Selection list Action Pull down a list of actions, edit options, and online Help. Click a button to perform an action. Type in the information that is needed to complete an action. View a list of the content that you may enter in the input field. 28 Avaya Visual Vectors R13 User Guide

29 Managing objects in the My World directory Adding objects You can add three types of objects from you call center network to the My World directory: CMS servers Vectors New scratchpads Note: Note: New CMS servers are added to the My World directory whenever you make an initial connection to a CMS server. For more information, see Connecting to a new CMS server on page 26. To add a new vector or scratchpad to the My World directory (for example, a new vector for an ACD in the Vector Folder), you must first select a container for the object in a Navigator window. Note: Note: If you add or save a vector to the Vector Folder on a measured ACD, it is also added to the CMS database. Procedure - To add a new vector or ScratchPad to the My World directory: 1. In the Navigator window, highlight a ScratchPad or Vector Folder in the left-hand pane, and then click the right mouse button. The system displays the shortcut menu. 2. Do one of the following: If you selected a Vector Folder and are online select New from the shortcut list. If you selected a Vector Folder and are offline, select a vector type from the shortcut list. If you selected a ScratchPad, select New from the shortcut menu. The system displays the New Vector or New ScratchPad window. 3. Fill in the required information in the input fields in the window. For a new vector, you need to enter a name. If you are adding a new vector to an ACD, an Id is also required. 4. Click OK. If the addition was: Successful, the system displays the new object in the Navigator window. Not successful, the system displays an error message showing the cause of the failure. Issue 1.0 May

30 Setting up the My World objects directory Deleting objects Procedure You may want to delete a CMS from the My World directory or a vector from the CMS database. Getting information You may want to obtain additional information before you delete an object from the My World directory. To obtain information about the object before you delete it: 1. Select the object in the Navigator window and then do one of the following: Select Properties from the File menu or shortcut menu. Deleting an object Click the Properties icon on the toolbar. Press Alt+Enter. The system displays the Properties window. 2. Locate and note the relevant information. For example, verify that you have permission to delete the item. To delete a CMS server or vector listed in the My World directory: 1. Select the object in the Navigator window. 2. Do one of the following: Select Delete from the File menu or shortcut menu. Click the Delete icon on the toolbar. Press Delete. If the deletion was: - Successful, the contents of the object (steps) are removed causing the vector to not appear in Navigator. - Not successful, the system displays an error message showing the cause of the failure. 30 Avaya Visual Vectors R13 User Guide

31 Managing objects in the My World directory Renaming objects You may want to rename an object that already exists in the My World directory. You may need to obtain information from the CMS database before renaming the item for future reference. Getting information To obtain information from the CMS database before you rename the item: 1. Select the object in the Navigator window and then do one of the following: Select Properties from the File menu or shortcut menu. Doing the renaming Click Properties on the toolbar. Press Alt+Enter. The system displays the Properties window. 2. Locate and note the relevant information. For example, verify the type of the vector you want to rename. 3. Close the Properties window. To rename an ACD object in the CMS database: 1. Select the object in the Navigator window. 2. Do one of the following: Select Rename from the File menu or shortcut menu. Click Rename on the toolbar. The system displays the Renaming object window with the Name property field highlighted. 3. Type in the new name or edit the existing name and then click OK. If the object was Renamed, the system displays the new name in the Navigator window. Not renamed, the system displays an error message that shows the cause of the failure. Issue 1.0 May

32 Setting up the My World objects directory Changing other object properties Procedure - Use this procedure to change properties of one or more objects or entities, such as a split/skills, vectors, VDNs, or trunk groups. 1. Select one or more object in the Navigator window and then do one of the following: Select Properties from the File menu or shortcut menu. Click Properties on the toolbar. Press Alt+Enter. If a single object was selected, the system displays the Properties dialog. If multiple objects were selected, the system displays the Properties of Many Objects dialog. The window contains properties for the object or objects for which you have permissions in the CMS Dictionary. 2. Type the new values in the fields you want to change. The system displays a red box around any property fields with invalid values. 3. When you have made all of your changes and no red boxes are displayed, click OK. 32 Avaya Visual Vectors R13 User Guide

33 My World objects My World objects Objects include items on which you can perform actions in the My World directory. For example, the objects may be vectors, trunk groups, or ACDs. No matter which tool you use to select an object, the way in which you perform an action on the object is the same. This section includes the following information: Defining My World objects on page 33 Defining My World objects The following list includes possible objects in the My World directory. To perform actions on the object, click the object using the right mouse button. My World object on page 34 ScratchPad object on page 34 CMS object on page 35 ACD object on page 35 Announcement Folder object on page 35 Announcement object on page 36 Split/Skill Folder object on page 36 Split/Skill object on page 36 Trunk Group Folder object on page 37 Trunk Group object on page 37 Vector Folder object on page 37 Vector object on page 38 VDN Folder object on page 38 VDN object on page 39 Issue 1.0 May

34 Setting up the My World objects directory My World object The following table describes the My World object: Actions Explore Disconnect All Navigator New Properties Description Expands My World to show one or more CMS Servers for which you have read or read and write permission. Displays the Disconnect window with all connected CMS servers highlighted. Launches the Navigator window with the My World director as the place to start browsing. If the CMS submenu is clicked, accesses the New CMS window to add a new server to your world. Displays the properties of the My World directory. ScratchPad object The following table describes the ScratchPad object: Actions Explore Navigator New Cut Copy Paste Delete Rename Properties Description Expands the ScratchPad. Launches the Navigator window with the ScratchPad as the place to start browsing. Creates a new ScratchPad or new vectors. Cuts the selected ScratchPad, to be pasted later. Copies an object, to be pasted later. Pastes an object that has been cut or copied. Deletes the ScratchPad. Places the user in edit mode for the ScratchPad name field in the Renaming ScratchPad window. Displays the properties of the ScratchPad. 34 Avaya Visual Vectors R13 User Guide

35 My World objects CMS object The following describes the CMS object: Actions Explore Connect Disconnect Navigator Delete Properties Descriptions Expands the CMS object to show one or more ACDs for which you have read or read and write permission. Displays the Connect to server window for this CMS. Displays the Disconnect window with this CMS highlighted. Launches the Navigator window with the CMS as the place to start browsing. Removes the CMS from the My World directory. Displays the properties of the CMS. ACD object The following table describes the ACD object: Actions Explore Navigator Rename Properties Descriptions Expands the ACD object to show folders of CMS entities. Launches the Navigator window with the ACD as the place to start browsing. Places you in edit mode for the ACD name field in the Renaming ACD window. Displays properties of the ACD. Announcement Folder object The following table describes the Announcement Folder object: Actions Explore Navigator Properties Descriptions Expands the Announcement Folder. Launches the Navigator window with the folder as the place to start browsing. Displays the properties of the Announcement folder. Issue 1.0 May