Voltson Smart Wi-Fi Outlet

Transcription

1 Voltson Smart Wi-Fi Outlet Model No.: ESW01-USA Questions or Concerns? (855) support@etekcity.com

2 Thank You. Thank you for purchasing the Voltson Smart Wi-Fi Outlet by Etekcity. We are dedicated to providing our customers with quality products for building a better living. Should you have any questions or concerns about using your new product, feel free to reach out to our helpful customer support team at (855) or by at support@etekcity.com. We hope you enjoy your new product! 2

3 Table of Contents Safety Information 4 Fuction Diagram 5 Setup 6 Configuration 7 APN Mode 11 Operation Turning Devices On/Off 15 Data 17 Creating Schedules 19 Using Sunrise & Sunset Scheduling 21 Set Timer 26 Away Mode 28 Device Setting 30 Share Device 31 Energy Saving Mode 33 Power Protection 34 Reconfiguring a Device 35 Connect with Alexa 39 Connect with Google Home 43 Delete a Device 47 Log Out 48 Specifications 50 Troubleshooting 51 Warranty 52 Customer Support 53

4 Safety Information IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before using the device. Failure to comply with the instructions given in this manual and/or using the device in ways other than the ones mentioned in this manual may result in serious injury and/or damage to the product. DO NOT exceed the maximum load current of 8A (approximately 960W). Always check the electrical power before use to avoid potential damage to the device. DO NOT use for or near space heaters or air conditioning units. Keep out of reach of children. The outlet is for indoor use only. Avoid exposure to high-temperature sources, direct sunlight and moisture. The outlet is best used in areas with good air circulation. To avoid short circuiting, keep the outlet out of direct/indirect contact with water and liquids. DO NOT install the outlet in washrooms, restrooms, and any other damp environments. When cleaning, use a dry cloth to wipe the outlet s surface. The VeSync home automation app is only compatible with Android 4.0 / ios 7.0 operating systems and above. The app does not support every phone/tablet. Only use Android 4.0 / ios 7.0 or above. The outlet does not support 2G/3G/4G networks for configuration. Before configuration, make sure the wireless network is operating normally in order to avoid adverse effects on the product operation. 4

5 Function Diagram 1. Power button 2. LED indicator 2 1 Front View Back View 5

6 Setup 1. Scan the QR code or download the VeSync App from the App Store or Google Play Store. 2. Open the VeSync App and tap Sign Up to create a new account. Enter a new & password, then tap Sign In. Note: It is recommended create an account so that you can connect to Amazon Echo for voice control. You can also share the outlet with your friends and family to control. ios Android NOTE: For Android users, you must select Allow to use VeSync. 6

7 Configuration 1. Tap the + button on the screen to add your device. 2. Select Wi-Fi outlet. 7

8 3. Select this model. 4. Plug your smart outlet into a powered electrical outlet or power strip. The LED indicator should light up blue. 8 Note: A purple LED light means the yellow and blue lights are on at the same time. If your LED light is yellow or off, please refer to the Reconfiguration section on page 31.

9 5. Type in the name of your home Wi-Fi network and password, then tap Join Network. Note: This Wi-Fi outlet configuration only supports a 2.4GHz Wi-Fi network. 6. The system will take a moment to connect. If you tap Cancel you will be taken back to the setup screen. WiFi123 9

10 7. Congratulations! You have completed setup. Give your outlet a unique name, or simply tap OK to use the default name. Note: You can change the device name and picture at any time in Device Setting. 10

11 APN Mode If setup fails, you can use APN mode to configure your Wi-Fi outlet. 1. While on the configuration page, tap Use APN Mode. 11

12 2. Enter your home Wi-Fi network name and password to start setup. 3. Press and hold the power button for 10 seconds until the LED light blinks blue or purple. Note: If necessary, unplug the outlet, then plug it back in. WiFi123 12

13 4. Go to the Settings on your mobile device, and select the Wi-Fi network that reads ESP-XXXX (Settings -> Wi-Fi) 5. The system will take a moment to connect. If you tap Cancel you will be taken back to the setup screen. 13

14 6. Congratulations! You have completed setup. Give your outlet a unique name, or simply tap OK to use the default name. 14

15 Operation Turning Devices On/Off Method 1 On the My Devices screen, you can tap the power button to turn the device on/off. Note: This on/off power button controls the power flow of the smart outlet. The outlet itself will remain connected to the internet. Device is Off Device is On 15

16 Method 2 Tap on the device on the My Devices screen for a detailed view of the device. Tap the power button on the detailed view to turn the device on. Off On 16

17 Data The VeSync app gathers information from the outlet and will automatically calculate your energy usage. Follow the steps below to view energy consumption reports on the app. 1. On the detailed device page, tap the area near Energy. You can also tap the arrow to the right of Energy. 17

18 2. Tap W, M, Y, respectively, to see weekly, monthly, and yearly energy consumption. Tapping the 4th button allows you to view the energy consumption over a custom time period. 3. To select a customized time period, tap the desired dates to define a start and end time. The app will display the corresponding data. 18

19 Creating Schedules 1. Tap + Create Schedule to create a scheduled time for the device. 2. Set your scheduled time for your device and a command to turn the outlet on or off at the scheduled time. You can also set an end time or leave it blank. Tap Save when you are done. 19

20 3. You can turn on or off any schedule at anytime for your outlet. Note: This smart outlet supports up to 32 groups of schedules, timers, and away modes. 20

21 Using Sunrise & Sunset Scheduling You can schedule the outlet to turn on or off at sunrise or sunset based on your location. 1. Make sure Location Services has been turned on for VeSync. 2. Tap + Create Schedule to create a scheduled time for device. 21

22 3. Select the Start or End time to set the time for sunrise or sunset. Note: You can not select sunrise or sunset for the same time. If you select Sunrise for your start time, you must select Sunset for the end time. 22

23 4. When the time selection comes onto the screen, tap on the left or right arrows to select Sunrise or Sunset. 23

24 5. To confirm Sunrise or Sunset, tap the checkmark to program the time. 6. You can also select Sunrise or Sunset for your end time. End 24

25 7. Tap Save at the top of the screen when you have set your start and end times. 8. You can turn on or off any schedule at anytime for your outlet. 25

26 Set Timer 1. On the detailed device view, tap Timer then tap + Set Timer to set a timer. 2. Set your timer and command to turn the outlet on or off. Tap Save when you are done. 26

27 3. Tap Start to start timer. When the timer ends, it will execute the command you have set for the outlet. Note: For your safety, you cannot turn the device off once the timer has started. 27

28 Away Mode The away mode turns on the outlet at random for half-hour intervals during the programmed time. For example, if your programmed away timer is at 11:30 pm, the away timer will turn the outlet on at anytime between 11:00 pm to 12:00 am for half an hour. 1. On the detailed device view tap Away, then tap + Set Away to set an away timer. 28

29 2. Set a start and end time, and select the desired days for the away timer. Tap Save when you are done. 3. Swipe to turn your away timer on or off. 29

30 Device Setting This menu allows you to edit your device name and picture, as well as turn on/off notifications. This menu also provides options for the Energy Saving Mode, Power Protection, device sharing, and firmware updates. 30

31 Share Device Note: You cannot share your device if you have not created a VeSync account. 2. Enter the person s and tap Share. 1. To allow your friends and family to control your outlet, tap + on the upper right-hand corner to share. user@etekcity.com 31

32 3. Tap the trash can icon to delete people who you have shared your device with. Note: The persons you share your device with cannot edit or delete your device settings. User 32

33 Energy Saving Mode The VeSync App allows you to program the smart Wi-Fi outlet to save energy based on the cost per kilowatt hours (kwh). 2. Turn on the Energy Saving Mode. Enter your Cost per KWh and Max cost. Tap to Save when you are done. Your device will now turn off once it has reached your max cost setting. 1. On the Device Setting menu, tap Energy Saving Mode to access the Energy Saving Mode settings. 33

34 Power Protection The Power Protection mode enables you to program the outlet to prevent power spikes from damaging your connected devices. Note: This Wi-Fi outlet is not a professional energy calculating device. The outlet only provides rough estimates and should not be relied on as a primary source for power protection. 1. On the Device Setting menu, tap Power Protection to access the Power Protection settings. 2. Activate the Power Protection mode, enter a threshold, and tap OK to save. The device will turn off when power usage has exceeded the threshold. 34

35 Reconfiguring a Device 2. Tap the + button on the screen to add your device. 1. Unplug your connected device from the Wi-Fi Outlet. Press and hold the power button on the outlet for about 5 seconds until the LED indicator shines solid blue. 35

36 3. Select Wi-Fi outlet. 4. Select this model. 36

37 5. Plug your smart outlet into a powered electrical outlet or power strip, then check the LED indicator. If the indicator light is solid blue, then you can tap to continue setup. 6. Type in the name of your home Wi-Fi network and password, then tap Join Network. WiFi123 Note: A purple LED light means yellow and blue light are on at the same time. If your LED light is yellow or off, please reconfigure the outlet. 37 Note: This Wi-Fi outlet configuration only supports a 2.4GHz Wi-Fi network.

38 7. The system will take a moment to connect. If you tap Cancel you will be taken back to the setup screen. 38

39 Connect with Alexa Note: You must create a VeSync account to connect with Alexa. To view these instructions on the VeSync app, tap More on the My Devices page, then tap Connect with Alexa. 39

40 40

41 41

42 42

43 Connect with Google Home Note: You must create a VeSync account to connect with Google Home. To view these instructions on the VeSync app, tap More on the My Devices page, then tap Connect with Google Home. 43

44 44

45 45

46 46

47 Delete a Device 1. You can delete your device on the Device Setting menu. This option is located at the bottom of the screen. Android devices: On the My Devices screen, press and hold for 2 seconds to delete. ios devices: On the My Devices screen, swipe left to delete. HOLD 2 SECONDS Note: People whom you have shared the device with cannot delete it. 47

48 Log Out Note: You do not need to log out if you have not created a VeSync account. 1. Tap your profile picture. 1. Tap on More. User 48

49 3. Tap Log Out at the bottom of the profile menu. User 49

50 Specifications Communication Mode Communication Frequency Wireless Distance (Outlet to Router) Maximum Switch Current AC Power Supply Range & Supply Frequency Rf PA Power Power Consumption IEEE802.11b/g/n (Wi-Fi) MHz feet meters (max visible range) 8A 120V, 60Hz 25 dbm W Operating Environment 14 F ~ 104 F -10 C ~ 40C Storage & Transportation Environment -4 F ~ 104 F -20 C ~ 60C Size Compatible Systems 102mm x 62mm x 30mm Android 4.0 or higher ios 7.0 or higher NOTE: Your outlet Wi-Fi signal range may be shortened or adversely affected by one or more of the following: your Wi-Fi network operation power rate, the Wi-Fi sensitivity of the receiving device, thick building walls and surrounding electrical devices. 50

51 Troubleshooting Q: Why won t my device respond to my app remote commands? Ensure that your Wi-Fi network is working properly and that the Wi-Fi outlet is properly plugged in and connected to a device. Check to make sure the Wi-Fi outlet isn t placed too far from the wireless network router. It must be within a 164 ft (50m) visible range from the router. Q: Why won t the power usage data update in the app even when my outlet is in use? Sometimes it takes some time for the power usage data to update. If you re using a low power consumption appliance, data may take longer to transfer. Q: Why won t the VeSync app allow me to add a device? The outlet has been reconfigured. If the device network was set up by another user, have the primary user share the device with you so that you can set up the outlet on your mobile device. Make sure your Wi-Fi outlet s firmware is up to date. Make sure the Wi-Fi password you re inputting is correct. Try configuration using APN mode. Remove the Wi-Fi outlet from its power supply; wait a few seconds and plug the outlet back in and re-attempt configuration. Q: After adding a device, why won t the device icon appear on the main screen of the VeSync app? Refresh the main menu screen and the device should then normally appear on the screen. Q: After moving a Wi-Fi outlet to another socket, the outlet is appearing as offline or the light is slowly blinking blue. Why is this happening? Check to make sure the Wi-Fi outlet isn t placed too far from the wireless network router. It must be within a 164 ft (50m) visible range from the router. Check to make sure the wireless network has not changed and is functioning normally. Reset the outlet by pressing and holding the outlet power button for 20 seconds and releasing when the indicator light begins to flash quickly. Then, re-configure the outlet with the network. 51

52 Warranty Terms & Policy Etekcity warrants all products to be of the highest quality in material, craftsmanship and service for a minimum of 1 year effective from the date of purchase. Warranty lengths may vary between product categories. Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is ours! Please scan here for the full warranty. 52

53 Customer Support Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is ours! Customer Support Etekcity Corporation 1202 N Miller St. Suite A Anaheim, CA Toll-Free: (855) Fax: (657) Local: (657) support@etekcity.com Support Hours Monday - Friday: 9:00 am - 5:00 pm PST *Please have your order number ready before contacting customer support. 53

54 Connect with 54

55 Scan here to join the community! Visit us at Building on better living.