EasyMP Network Projection Operation Guide

Transcription

1 EsyMP Network Projection Opertion Guide

2 Contents 2 Introduction to EsyMP Network Projection EsyMP Network Projection Fetures... 5 Disply Options... 6 Multi-Screen Disply Function... 6 Movie Sending Mode... 6 Presenttion Mode...6 Distribution Function... 6 Connection Modes... 8 Quick Connection Mode... 8 Advnced Connection Mode... 8 Setting Up EsyMP Network Projection for the First Time Instlling the Softwre EsyMP Network Projection System Requirements...10 Instlling EsyMP Network Projection (Windows)...11 Instlling EsyMP Network Projection (Mc OS X)...11 Setting Up the Projector Connection Methods for Vrious Network Environments...12 Setting Up Projector to Connect in Quick Connection Mode Setting Up Projector to Connect in Advnced Connection Mode (Wireless) Setting Up Projector to Connect in Advnced Connection Mode (Wired)...15 Connecting to the Projector nd Projecting Imges Connection Methods Connecting the Projector nd Computer Directly Using Wireless Communiction. 17 Connecting the Projector nd Computer over Network System (Wireless) Connecting the Projector nd Computer over Network System (Wired) Selecting the Projector Serch Method Serch Methods...23 Serching for Network Projectors Automticlly...23 Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme...24 Serching for Network Projectors Using Profile...25 Profiles for Serch...25 Performing Profile Serch Mking Profile...26 Mnging Profile Controlling the Projected Disply Hiding Computer Opertions...30 Switching the Input Source Finishing Projecting Imges Using Additionl Functions Chnging the Computer Projection Source Projecting Only PowerPoint Slide Show Projecting Movies Supported Movie Files...36 Using Movie Sending Mode...36 Projecting Imges Using the Multi-Screen Disply Function Multi-Screen Disply Exmples...39 Setting Up Multi-Screen Disply...40 Enbling the Virtul Disply Driver (Windows)...40 Arrnging the Multi-Screen Disply (Windows)...41 Arrnging the Multi-Screen Disply (Mc OS X)...43 Projecting Imges to the Arrnged Multi-Screen Disply...45 Projecting One Computer Screen from Multiple Projectors

3 Contents 3 Solving Problems Solving Network Connection Problems Solutions When You Cnnot Connect Using Quick Connection Mode Solutions When You Cnnot Connect Projectors Using Advnced Connection Mode (Wireless)...50 Solutions When You Cnnot Connect Projectors Using Advnced Connection Mode (Wired) Solving Problems During Projection Solutions When the Computer Screen is Not Displyed Properly...53 Solutions When the Screen is Not Projected Properly...53 Solutions When Audio is Not Plyed Properly...54 Error Messges List Error Messges when Strting up EsyMP Network Projection...55 Error Messges when Serching for nd Selecting Projectors...56 Error Messges when Projecting...56 Event ID List Screen Summry Select Connection Mode Screen Serch nd Connect Screen Profiles Sve in the profile...64 Edit profile...64 Projector control Movie Sending Mode Add-Remove Virtul Disply Appendix Updting nd Uninstlling the Softwre Getting the Ltest Version of the Appliction Uninstlling EsyMP Network Projection (Windows XP/Windows Vist/Windows 7). 76 Uninstlling EsyMP Network Projection (Windows 8)...76 Uninstlling EsyMP Network Projection (Mc OS X)...77 Supported Resolutions nd Colors Supported Resolutions Disply Color...78 Limittions Connection Limittions...79 Limittions when Projecting from Windows Photo Gllery or Windows Live Photo Gllery Limittions in Windows Aero Limittions when Projecting from Windows Medi Center...80 Notices Copyright Notice...81 About Nottions...81 Generl Notice...81 Set options Set options - Generl settings...66 Set options - Adjust performnce...67 Set options - Audio Output Toolbr Select trget projector...71

4 Introduction to EsyMP Network Projection See the informtion here to lern more bout EsyMP Network Projection softwre. "EsyMP Network Projection Fetures" p.5 "Disply Options" p.6 "Connection Modes" p.8

5 EsyMP Network Projection Fetures 5 You cn use EsyMP Network Projection softwre to project imges from your computer to the projector over network. Shring the projector over network llows you to project imges from different computers without hving to chnge cble connections, s well s project imges from remote loction. "Introduction to EsyMP Network Projection" p.4

6 Disply Options 6 You cn use vriety of disply options for projecting imges. "Introduction to EsyMP Network Projection" p.4 "Multi-Screen Disply Function" p.6 "Movie Sending Mode" p.6 "Presenttion Mode" p.6 "Distribution Function" p.6 Multi-Screen Disply Function You cn project different imges from up to four projectors tht re connected to one computer. This llows you to project complex dt, such s business report, in n extr-wide lndscpe formt. Movie Sending Mode You cn ply movies smoothly by sending movie files directly to the projector. This function is only vilble for supported models. "Disply Options" p.6 "Projecting Movies" p.36 Presenttion Mode You cn project PowerPoint slide show from your computer without displying ny other distrcting computer content. While using Presenttion Mode, blck screen is projected when the PowerPoint slide show is not plying. "Disply Options" p.6 "Projecting Only PowerPoint Slide Show" p.35 Distribution Function "Disply Options" p.6 "Projecting Imges Using the Multi-Screen Disply Function" p.39 You cn project the sme computer imge simultneously from up to four projectors connected to the sme network.

7 Disply Options 7 You cnnot connect multiple networked computers to one projector t the sme time. "Disply Options" p.6 "Projecting One Computer Screen from Multiple Projectors" p.47

8 Connection Modes 8 You cn use the following methods to connect computer to projector over network by using EsyMP Network Projection. "Introduction to EsyMP Network Projection" p.4 "Quick Connection Mode" p.8 "Advnced Connection Mode" p.8 Advnced Connection Mode You cn connect the projector nd the computer using n existing network system. To use Advnced Connection Mode, you need to connect the projector to n ccess point or to network hub. Quick Connection Mode You cn connect the projector nd the computer directly using wireless communiction. This llows you to project the computer screen without mking ny complicted network settings. Quick Connection Mode is only vilble when you instll the wireless LAN unit on the projector. "Connection Modes" p.8 "Setting Up Projector to Connect in Advnced Connection Mode (Wireless)" p.14 "Setting Up Projector to Connect in Advnced Connection Mode (Wired)" p.15 "Connecting the Projector nd Computer over Network System (Wireless)" p.19 "Connecting the Projector nd Computer over Network System (Wired)" p.20 "Connection Modes" p.8 "Setting Up Projector to Connect in Quick Connection Mode" p.13 "Connecting the Projector nd Computer Directly Using Wireless Communiction" p.17

9 Setting Up EsyMP Network Projection for the First Time Follow these instructions before connecting computer to the projector over network. "Instlling the Softwre" p.10 "Setting Up the Projector" p.12

10 Instlling the Softwre 10 Instll EsyMP Network Projection from the EPSON Projector Softwre CD-ROM supplied with your projector. If the lnguge selected for the instlltion differs from the lnguge of the operting system being used, the screens my not be displyed correctly. You cn downlod the ltest version of EsyMP Network Projection from the EPSON Web site. If previous version of EsyMP Network Projection is lredy instlled on your computer, uninstll it first nd then instll EsyMP Network Projection. "Setting Up EsyMP Network Projection for the First Time" p.9 "EsyMP Network Projection System Requirements" p.10 "Instlling EsyMP Network Projection (Windows)" p.11 "Instlling EsyMP Network Projection (Mc OS X)" p.11 "Getting the Ltest Version of the Appliction" p.76 EsyMP Network Projection System Requirements Your computer must meet the following system requirements to use the EsyMP Network Projection softwre. Requirement Windows Mc Operting system Windows XP Professionl (32-bit) Home Edition (32-bit) Tblet PC Edition (32-bit) Mc OS X 10.4.x (32-bit) or lter (32-bit) 10.6.x (32- nd 64-bit) 10.7.x (32- nd 64-bit) 10.8.x (64-bit) (Mc OS X , , , , or recommended) Requirement Windows Mc CPU Memory Windows Vist Ultimte (32-bit) Enterprise (32-bit) Business (32-bit) Home Premium (32-bit) Home Bsic (32-bit) Windows 7 Ultimte (32- nd 64-bit) Enterprise (32- nd 64-bit) Professionl (32- nd 64-bit) Home Premium (32- nd 64- bit) Home Bsic (32-bit) Strter (32-bit) Windows 8 Windows 8 (32- nd 64-bit) Windows 8 Pro (32- nd 64- bit) Windows 8 Enterprise (32- nd 64-bit) Mobile Pentium III 1.2 GHz or fster (Pentium M 1.6 GHz or fster recommended) 256 MB or more (512 MB or more recommended) Power PC G3 900 MHz or fster (CoreDuo 1.83 GHz or fster recommended) Hrd disk spce 20 MB or more Disply Resolution between (XGA) nd (WUXGA) 16-bit color or greter (pproximtely 32,000 disply colors)

11 Instlling the Softwre 11 Opertion is not gurnteed for Windows XP without ny service pcks instlled, or Windows XP Service Pck 1. Opertion is not gurnteed for Mc OS X becuse the Firewll settings re not set correctly when the version is updted. "Instlling the Softwre" p.10 Instlling EsyMP Network Projection (Windows) Instll EsyMP Network Projection on your computer. You need dministrtor uthority to instll the softwre. b c d e Turn on your computer. Mke sure ll running pplictions re closed. Insert the EPSON Projector Softwre CD-ROM into the computer. The instller strts utomticlly. If the instller does not strt utomticlly, open the CD-ROM drive from My Computer (or Computer), nd then double-click InstllNvi.exe or EMP_NSCInst.exe. Follow the on-screen instructions to instll. Instlling EsyMP Network Projection (Mc OS X) Instll EsyMP Network Projection on your computer. b c d e Turn on your computer. Mke sure ll running pplictions re closed. Insert the EPSON Projector Softwre CD-ROM into the computer. Double-click the EMP_NPInstller.mpkg icon in the EPSON window. Instlltion strts. Follow the on-screen instructions to instll. "Instlling the Softwre" p.10 "Instlling the Softwre" p.10

12 Setting Up the Projector 12 Follow these instructions to select connection method between computer nd the projector, nd then set up the projector. "Setting Up EsyMP Network Projection for the First Time" p.9 "Connection Methods for Vrious Network Environments" p.12 "Setting Up Projector to Connect in Quick Connection Mode" p.13 "Setting Up Projector to Connect in Advnced Connection Mode (Wireless)" p.14 "Setting Up Projector to Connect in Advnced Connection Mode (Wired)" p.15 To connect the projector to the computer directly using wireless communiction: Use Quick Connection Mode. Connection Methods for Vrious Network Environments You cn choose connection mode to suit your network environment. Check how the projector is connected to the network system (wireless or wired) nd the communiction pth from the computer to the projector. Depending on your projector, some connection methods my not be vilble. See the User's Guide supplied with the projector for more detils. To connect the projector to the computer using wireless network system: Use Advnced Connection Mode.

13 Setting Up the Projector 13 To connect the projector to the computer using wired network system: Use Advnced Connection Mode. b c d e Select the necessry settings to connect your computer to wireless LAN. See the documenttion supplied with your computer for more detils. Instll the wireless LAN unit in the projector, if necessry. See the User's Guide supplied with the projector for more detils. Turn on the projector. Press the [Menu] button on the remote control or the control pnel, select the Network menu, nd select Network Configurtion. Select Wireless LAN. A screen like one of the following is displyed. "Setting Up the Projector" p.12 "Setting Up Projector to Connect in Quick Connection Mode" p.13 "Setting Up Projector to Connect in Advnced Connection Mode (Wireless)" p.14 "Setting Up Projector to Connect in Advnced Connection Mode (Wired)" p.15 Setting Up Projector to Connect in Quick Connection Mode To connect computer directly to the projector using wireless communiction, you need to select network settings on the computer nd the projector. f g h i Select On for Wireless LAN Power. Select Quick for Connection Mode. Select other options s necessry for your network. See the User's Guide supplied with the projector for more detils. Select security settings on the Security menu s necessry for your network. Check with your network dministrtor for more informtion on mking the correct settings.

14 Setting Up the Projector 14 j When you hve finished mking settings, select Setup Complete or Complete nd follow the on-screen instructions to sve your settings nd exit the menus. f Select Wireless LAN. A screen like one of the following is displyed. "Setting Up the Projector" p.12 "Connecting the Projector nd Computer Directly Using Wireless Communiction" p.17 Setting Up Projector to Connect in Advnced Connection Mode (Wireless) To connect computer to the projector over wireless LAN, you need to select network settings on the computer nd the projector. b Contct your network dministrtor nd write down the settings for the ccess point, such s the SSID nd security settings. Connect the computer to the network. To set up network connection, if necessry, see the documenttion supplied with your computer or network dpter. g h i j k Select On for Wireless LAN Power. Select Advnced for Connection Mode. Select other options s necessry for your network. See the User's Guide supplied with the projector for more detils. Select security settings on the Security menu s necessry for your network. Check with your network dministrtor for more informtion on mking the correct settings. When you hve finished mking settings, select Setup Complete or Complete, nd follow the on-screen instructions to sve your settings nd exit the menus. c d e Instll the wireless LAN unit in the projector, if necessry. See the User's Guide supplied with the projector for more detils. Turn on the projector. Press the [Menu] button on the remote control or the control pnel, select the Network menu, nd then select Network Configurtion. "Setting Up the Projector" p.12 "Connecting the Projector nd Computer over Network System (Wireless)" p.19

15 Setting Up the Projector 15 Setting Up Projector to Connect in Advnced Connection Mode (Wired) To connect computer to the projector using wired LAN, you need to select network settings on the computer nd the projector. b c d e f Contct your network dministrtor nd check tht DHCP is vilble under the current network environment. If DHCP is not vilble, write down the following vlues tht re vilble for your projector. IP Address Subnet Msk Gtewy Address Connect the computer to the network. To set up network connection, if necessry, see the documenttion supplied with your computer or network dpter. Connect LAN cble to the projector. Turn on the projector. Press the [Menu] button on the remote control or the control pnel, select the Network menu, nd select Network Configurtion. Select Wired LAN. A screen like one of the following is displyed. g h Select IP settings s necessry. DHCP is vilble: Set DHCP to On. DHCP is not vilble: Set DHCP to Off nd enter the projector's IP Address, Subnet Msk, nd Gtewy Address vlues s necessry. When you hve finished mking settings, select Setup Complete or Complete, nd follow the on-screen instructions to sve your settings nd exit the menus. "Setting Up the Projector" p.12 "Connecting the Projector nd Computer over Network System (Wired)" p.20

16 Connecting to the Projector nd Projecting Imges Follow these instructions to connect the computer nd the projector over network, nd to project imges from your computer's screen using the projector. Mke sure you hve lredy set up EsyMP Network Projection nd selected connection mode for the projector. "Connection Methods" p.17 "Selecting the Projector Serch Method" p.23 "Controlling the Projected Disply" p.30 "Finishing Projecting Imges" p.32 "Instlling the Softwre" p.10 "Setting Up the Projector" p.12

17 Connection Methods 17 You cn select suitble method to connect the computer nd the projector over network depending on your network environment. "Connecting to the Projector nd Projecting Imges" p.16 "Connecting the Projector nd Computer Directly Using Wireless Communiction" p.17 "Connecting the Projector nd Computer over Network System (Wireless)" p.19 "Connecting the Projector nd Computer over Network System (Wired)" p.20 Connecting the Projector nd Computer Directly Using Wireless Communiction When your projector is set up s indicted below, you cn connect the projector nd computer directly using wireless communiction to project the computer's screen. The wireless LAN unit is instlled in the projector. The projector's connection method is set to Quick. When you connect the projector nd computer directly using wireless communiction, the connection between the computer nd n ccess point is disconnected. Mke sure you turn on your computer's wireless communiction function. b c Strt EsyMP Network Projection. EB Windows XP, Windows Vist, nd Windows 7: Click Strt, select Progrms (or All Progrms), EPSON Projector, EsyMP Network Projection, nd then click EsyMP Network Projection Ver.X.XX. Windows 8: Select Serch on the Chrms, nd then select EsyMP Network Projection Ver.X.XX. Mc OS X: Double-click EsyMP Network Projection from the Applictions folder. Select Quick Connection Mode, nd then click OK. Press the [LAN] button on the remote control. The LAN stndby screen is projected.

18 Connection Methods 18 Windows Vist, Windows 7, nd Windows 8: Enter the keyword displyed on the LAN stndby screen, nd then click OK. When the following dilog box is displyed, enter the pssphrse set on the projector, nd then click Connect. The projector serch results re displyed. d e f If the projector you wnt to connect to is not displyed in the serch results, serch for it using one of the following methods. Automtic Serch: Serches for the projector utomticlly. Mnul Serch: Serches for the projector bsed on the SSID selected from list. Profile: Serches for the projector bsed on previously sved profile. Select the projector you wnt to connect to, nd then click Connect. When Projector Keyword is set to On from the projector, the keyword entry screen is displyed. Enter the projector keyword nd pssphrse. Windows XP nd Mc OS X: Enter the keyword displyed on the LAN stndby screen, nd then click OK. If you select Sve the pssphrse nd don't show this dilog box gin, the projector's SSID nd pssphrse re sved on the computer nd this dilog box is not displyed the next time you connect. You do not hve to enter the pssphrse gin. If the projector's pssphrse hs not been chnged from the defult, the following dilog box is displyed. Chnge the pssphrse from the projector's Network menu. When connection is estblished, the computer screen is projected. The following EsyMP Network Projection toolbr is displyed on the computer screen.

19 Connection Methods 19 When connection is estblished, the input source for the projector utomticlly switches to the LAN source if no other signl is being input. If the input source does not utomticlly switch to the LAN source, press the [LAN] button. EB "Connection Methods" p.17 "Setting Up Projector to Connect in Quick Connection Mode" p.13 "Serching for Network Projectors Automticlly" p.23 "Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme" p.24 "Performing Profile Serch" p.25 Connecting the Projector nd Computer over Network System (Wireless) When your projector is set up s indicted below, you cn connect the projector to n existing network system nd project the computer's screen over the network. The wireless LAN unit is instlled in the projector. The projector's connection method is set to Advnced. b c Strt EsyMP Network Projection. Windows XP, Windows Vist, nd Windows 7: Click Strt, select Progrms (or All Progrms), EPSON Projector, EsyMP Network Projection, nd then click EsyMP Network Projection Ver.X.XX. Windows 8: Select Serch on the Chrms, nd then select EsyMP Network Projection Ver.X.XX. Mc OS X: Double-click EsyMP Network Projection from the Applictions folder. Select Advnced Connection Mode, nd then click OK. Mke sure you connect computer to the network. Press the [LAN] button on the remote control. The LAN stndby screen is projected.

20 Connection Methods 20 When connection is estblished, the input source for the projector utomticlly switches to the LAN source if no other signl is being input. If the input source does not utomticlly switch to the LAN source, press the [LAN] button. d e f The projector serch results re displyed. If the projector you wnt to connect to is not displyed in the serch results, serch for it using one of the following methods. Automtic Serch: Serches for the projector utomticlly. Mnul Serch: Serches for the projector bsed on specified IP ddress or projector nme. Profile: Serches for the projector bsed on previously sved profile. Select the projector you wnt to connect to, nd then click Connect. When Projector Keyword is set to On from the projector, the keyword entry screen is displyed. Enter the keyword displyed on the LAN stndby screen, nd then click OK. When the connection is complete, the computer screen is projected. The following EsyMP Network Projection toolbr is displyed on the computer screen. "Connection Methods" p.17 "Setting Up Projector to Connect in Advnced Connection Mode (Wireless)" p.14 "Serching for Network Projectors Automticlly" p.23 "Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme" p.24 "Performing Profile Serch" p.25 Connecting the Projector nd Computer over Network System (Wired) When your projector is set up s indicted below, you cn connect the projector to n existing network system nd project the computer's screen over the network. A LAN cble is connected to the projector. The projector's connection method is set to Advnced. Mke sure you connect computer to the network.

21 Connection Methods 21 Press the [LAN] button on the remote control. The LAN stndby screen is projected. EB The projector serch results re displyed. b c Strt EsyMP Network Projection. Windows XP, Windows Vist, nd Windows 7: Click Strt, select Progrms (or All Progrms), EPSON Projector, EsyMP Network Projection, nd then click EsyMP Network Projection Ver.X.XX. Windows 8: Select Serch on the Chrms, nd then select EsyMP Network Projection Ver.X.XX. Mc OS X: Double-click EsyMP Network Projection from the Applictions folder. Select Advnced Connection Mode, nd then click OK. d e f If the projector you wnt to connect to is not displyed in the serch results, serch for it using one of the following methods. Automtic Serch: Serches for the projector utomticlly. Mnul Serch: Serches for the projector bsed on specified IP ddress or projector nme. Profile: Serches for the projector bsed on previously sved profile. Select the projector you wnt to connect to, nd then click Connect. When Projector Keyword is set to On from the projector, the keyword entry screen is displyed. Enter the keyword displyed on the LAN stndby screen, nd then click OK. When the connection is complete, the computer screen is projected. The following EsyMP Network Projection toolbr is displyed on the computer screen.

22 Connection Methods 22 When connection is estblished, the input source for the projector utomticlly switches to the LAN source if no other signl is being input. If the input source does not utomticlly switch to the LAN source, press the [LAN] button. "Connection Methods" p.17 "Setting Up Projector to Connect in Advnced Connection Mode (Wired)" p.15 "Serching for Network Projectors Automticlly" p.23 "Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme" p.24 "Performing Profile Serch" p.25

23 Selecting the Projector Serch Method 23 You cn select suitble method to serch for projector depending on the sttus or loction of the projector you wnt to connect to. "Connecting to the Projector nd Projecting Imges" p.16 "Serch Methods" p.23 "Serching for Network Projectors Automticlly" p.23 "Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme" p.24 "Serching for Network Projectors Using Profile" p.25 Serch Methods You cn use one of the following methods to serch for the projector you wnt to connect to. Choose the best method depending on your environment. Serching for Network Projectors Automticlly You cn utomticlly serch for vilble projectors on the network. Serch results differ depending on the connection mode you use. Quick Connection Mode: Displys the SSID for vilble projectors. Advnced Connection Mode: Displys vilble projectors on the network. Serches re performed only on the sme subnet. Projectors on different subnets re not displyed in the serch results. Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme If the projector you wnt to connect to is not found utomticlly, you cn serch for the trget projector by specifying the SSID, IP ddress, or projector nme. By using Advnced Connection Mode, you cn serch for projectors t remote loctions on different subnet. Serching for Network Projectors Using Profile You cn sve network projector informtion s profile, nd then specify the profile to serch for the sme projector insted of providing projector detils ech time you serch. By creting group of profiles for ech plce where projector is setup nd mnging them with folders, the trget projector cn be found quickly. "Selecting the Projector Serch Method" p.23 Serching for Network Projectors Automticlly You cn utomticlly serch for vilble projectors on the network, nd then project imges by simply selecting the projector. Click Automtic serch on the serch nd connect screen. The serch tkes bout 30 seconds. The serch results re displyed. If you cnnot find ny projectors, try one of the other serch methods.

24 Selecting the Projector Serch Method 24 "Selecting the Projector Serch Method" p.23 "Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme" p.24 "Performing Profile Serch" p.25 "Serch Methods" p.23 b Specify one of the following items, nd then click OK. Quick Connection Mode: Select the SSID for the projector you wnt to connect to from the list. Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme If the projector you wnt to connect to is not found utomticlly, you cn serch for the trget projector by specifying the relevnt detils. In Quick Connection Mode, you cn serch for the projector by using n SSID. In Advnced Connection Mode, you cn serch for projector by using n IP ddress or projector nme. Click Mnul serch on the following screen. Advnced Connection Mode: Enter the IP ddress or the projector nme for the projector you wnt to connect to. The serch results re displyed. "Selecting the Projector Serch Method" p.23

25 Selecting the Projector Serch Method 25 Serching for Network Projectors Using Profile You cn sve network projector informtion s profile, nd then serch for the sme projector using the profile insted of specifying the projector detils ech time. "Selecting the Projector Serch Method" p.23 "Profiles for Serch" p.25 "Performing Profile Serch" p.25 "Mking Profile" p.26 "Mnging Profile" p.27 Profiles for Serch You cn sve informtion for network projector s profile. A profile is file contining ll of the projector's informtion, such s the projector nme, IP ddress, nd SSID. By using profile, you cn esily serch for sved projectors insted of providing projector detils. "Serching for Network Projectors Using Profile" p.25 b If no profiles re creted, you cnnot select Profile. Select the projector you wnt to connect to from the list. Performing Profile Serch You cn specify the profile to serch for the sved projector insted of providing projector detils ech time you serch. Click Profile on the serch nd connect screen. The serch results re displyed. "Serching for Network Projectors Using Profile" p.25

26 Selecting the Projector Serch Method 26 Mking Profile After serching for projector, you cn sve the projector detils s profile using memorble nme tht you cn serch for esily lter. While the projector is displyed on the following screen, click Sve in the profile. c Perform the following opertions s necessry. An overwrite confirmtion screen is displyed: If you re prompted to confirm whether or not you wnt to overwrite, select Sve s to sve profile with different nme. b Enter Profile nme, nd then click Add.

27 Selecting the Projector Serch Method 27 A folder selection screen is displyed: If you hve creted folder for profiles, one of the following screens is displyed. After entering the Profile nme nd selecting the Sve in destintion, click Add. Windows: The projector informtion is sved in the profile. "Serching for Network Projectors Using Profile" p.25 Mnging Profile You cn chnge the nme nd the orgniztion of your profiles. Click Set options on the following screen. Mc OS X:

28 Selecting the Projector Serch Method 28 b The Set options screen is displyed. Click Edit profile. c The Edit profile screen is displyed. Edit the profiles s necessry.

29 Selecting the Projector Serch Method 29 Your edits re sved nd the Edit profile screen closes. "Serching for Network Projectors Using Profile" p.25 A Displys the profiles. You cn drg nd drop profiles nd folders to chnge the folder structure. B Duplictes the profile. The copied profile is sved in the sme folder s the originl with the sme nme. C Deletes the profile nd the folder. D Displys the Renme dilog box to renme the folder or the profile. You cn enter up to 32 chrcters in the Renme dilog box. E Exports the profile. Exported profiles cn be used s bckup files. You cn then import them on nother computer. F Lods n exported profile. G Cretes new folder. H Displys the projectors sved in the profile. To delete specific projector from the profile, select the projector nd then press the Delete button. When ll projector informtion hs been deleted, the profile is lso deleted. d Click OK.

30 Controlling the Projected Disply 30 Follow these instructions to use the toolbr to control the screen being projected. "Connecting to the Projector nd Projecting Imges" p.16 "Hiding Computer Opertions" p.30 "Switching the Input Source" p.30 Hiding Computer Opertions You cn hide your computer opertions from your udience while giving presenttion by stopping, pusing, or muting the projection. Mke sure the toolbr disply is set to Full. d Stop: Click the button on the toolbr. The projected imge stops. A blck screen is projected while stopped. Puse: Click the button on the toolbr. The projected imge puses. The pused imge is projected. A/V Mute: Click the button on the toolbr, nd then click the button on the toolbr tht is displyed. The udio nd video turn off. The logo set for the projector is projected while using A/V Mute, if vilble. To return to the projected imge, perform one of the following opertions. Stop or Puse: Click the button on the toolbr. b If you re connected to multiple projectors, click the button on the toolbr nd select the projector you wnt to control. A/V Mute: Click the button gin. "Controlling the Projected Disply" p.30 c Perform one of the following opertions. Switching the Input Source When nother signl is being input to the projector while projecting over network, you cn chnge the input source from the toolbr. Mke sure the toolbr disply is set to Full.

31 Controlling the Projected Disply 31 b If you re connected to multiple projectors, click the button on the toolbr nd select the projector you wnt to control. c Click the button on the toolbr. Perform one of the following opertions. d Switch to computer source: Click the button. Switch to video source: Click the button. "Controlling the Projected Disply" p.30

32 Finishing Projecting Imges 32 You cn finish projecting imges by using the toolbr. Click the button to disconnect. The computer nd the projector re disconnected nd the LAN stndby screen is projected. The serch nd connect screen is displyed in EsyMP Network Projection softwre. "Connecting to the Projector nd Projecting Imges" p.16

33 Using Additionl Functions Follow these instructions to use dditionl EsyMP Network Projection functions tht my be useful during meeting or presenttion. "Chnging the Computer Projection Source" p.34 "Projecting Only PowerPoint Slide Show" p.35 "Projecting Movies" p.36 "Projecting Imges Using the Multi-Screen Disply Function" p.39 "Projecting One Computer Screen from Multiple Projectors" p.47

34 Chnging the Computer Projection Source 34 You cn chnge the computer from which you re projecting which llows you to chnge presenters during meetings, for exmple. If connection is mde while Disble interrupt connection is set on the serch nd connect screen, the connection is not switched to nother computer. b Strt EsyMP Network Projection on the computer you wnt to project from. Follow stndrd procedures to connect the projector nd computer. The computer tht is currently connected is disconnected, nd the projector connects to the computer tht is currently trying to connect. "Using Additionl Functions" p.33 "Connecting the Projector nd Computer Directly Using Wireless Communiction" p.17 "Connecting the Projector nd Computer over Network System (Wireless)" p.19 "Connecting the Projector nd Computer over Network System (Wired)" p.20

35 Projecting Only PowerPoint Slide Show 35 By using Presenttion Mode, you cn project only the PowerPoint slide show running on your computer. You cn strt presenttion without displying ny other distrcting computer content. While using Presenttion Mode, blck screen is projected when the PowerPoint slide show is not plying. Presenttion Mode lso works in Keynote with Mc OS X. Mke sure the toolbr disply is set to Full. e To stop Presenttion Mode, click the button gin. "Using Additionl Functions" p.33 b If you re connected to multiple projectors, click the button on the toolbr nd select the projector you wnt to control. c Click the button on the toolbr. d Run the PowerPoint slide show on your computer. The PowerPoint slide show is projected.

36 Projecting Movies 36 You cn project movies smoothly by using Movie Sending Mode. "Using Additionl Functions" p.33 "Supported Movie Files" p.36 "Using Movie Sending Mode" p.36 Supported Movie Files The following movie file types re supported. You cnnot project files protected by digitl rights mngement (DRM). Using Movie Sending Mode You cn send movie files directly to the projector by using Movie Sending Mode. This llows smoother ply bck of movies thn by projecting them from nother ppliction on your computer. You cn lso select multiple files nd ply them repetedly from first to lst. Some projectors my not support Movie Sending Mode. You cn use Movie Sending Mode to send movie to single projector. You cnnot send movie to multiple projectors t the sme time using Movie Sending Mode. The imge nd sound my skip or stop depending on the communiction method nd electromgnetic wve conditions. File Type (Extension).mpg.mpeg.mp4.wmv.sf Movie Codec Audio Codec Recording Qulity MPEG-2 MPEG-1 Lyer 1/2 You cn ply MPEG contents without udio. Liner PCM nd AC-3 re not supported. MPEG-4 ASP H.264/MPEG-4 AVC WMV9 MPEG-4 AAC-LC WMA Mximum frme rte: 30 fps Mximum resolution: Mke sure the toolbr disply is set to Full. b Click the button on the toolber. The projector selection screen is displyed. "Projecting Movies" p.36

37 Projecting Movies 37 c d Select the projector, nd then click OK. The Movie Sending Mode screen is displyed. Click Select File. f The Movie Sending Mode screen is displyed gin. The selected file is displyed in the Movie file list. If you click Select file gin, the Movie file list currently displyed is clered, nd then only the files you select lter re displyed in the list. Control movie ply bck using the Movie Sending Mode screen. e Select the movie file you wnt to ply, nd then click Open. A Displys the current point in the movie file. You cn drg nd drop the slider to the point where you wnt to strt plying.

38 Projecting Movies 38 B Plys the file. C Puses ply bck. D Stops ply bck. E Plys the current file from the beginning. F Plys the next file from the beginning. G Plys repetedly from the first file in the list. You cnnot repet one specific file when there re multiple files in the list. g To exit Movie Sending Mode, click Close. "Projecting Movies" p.36

39 Projecting Imges Using the Multi-Screen Disply Function 39 By using the multi-screen disply function, you cn project different imges from up to four projectors tht re connected to one computer. This llows you to project complex dt, such s business report, in n extr-wide lndscpe formt. "Using Additionl Functions" p.33 "Multi-Screen Disply Exmples" p.39 "Setting Up Multi-Screen Disply" p.40 Multi-Screen Disply Exmples By using the multi-screen disply function, you cn project imges in the following disply rrngements. For Windows, you cn set virtul disply drivers nd project ech imge from the projector. Virtul disply drivers re not vilble for Windows Vist, Windows 7, nd Windows 8. For Mc OS X, you must connect n externl monitor to the computer to use the multi-screen disply function. If you wnt to project two different imges from your computer to two projectors, you cn ssign the dditionl disply s shown below. A Actul monitor imge: PowerPoint file B Additionl disply imge: Excel file If you wnt to ccess two different imges or views on your computer but project only one imge to the projector, you cn ssign the dditionl disply s shown below.

40 Projecting Imges Using the Multi-Screen Disply Function 40 "Arrnging the Multi-Screen Disply (Mc OS X)" p.43 "Projecting Imges to the Arrnged Multi-Screen Disply" p.45 Enbling the Virtul Disply Driver (Windows) Before using the multi-screen disply function, you need to enble the virtul disply driver for Windows. If you hve lredy enbled the virtul disply while instlling EsyMP Network Projection, you do not need to enble it gin. Click Strt, select Progrms (or All Progrms), EPSON Projector, EsyMP Network Projection, nd then click Add-Remove Virtul Disply. The Add-Remove Virtul Disply screen is displyed. A Actul monitor imge: PowerPoint file presenter tools B Additionl disply imge: Slide show using PowerPoint file "Projecting Imges Using the Multi-Screen Disply Function" p.39 Setting Up Multi-Screen Disply Follow these instructions to set up multi-screen disply. If you connected n dditionl externl monitor to your computer, you cn skip the steps for enbling the virtul disply driver. "Projecting Imges Using the Multi-Screen Disply Function" p.39 "Enbling the Virtul Disply Driver (Windows)" p.40 "Arrnging the Multi-Screen Disply (Windows)" p.41

41 Projecting Imges Using the Multi-Screen Disply Function 41 b c Select the virtul disply you wnt to use. When setting multiple virtul displys, select s mny displys s necessry. Any one of the displys cn be selected. Click OK. The virtul disply drivers re enbled nd the disply my flicker. When the procedure is complete, the Add-Remove Virtul Disply screen closes. If the virtul disply driver hs been enbled so tht the mouse pointer cn be moved outside the limits of the screen, there my be occsions when you lose trck of the loction of the pointer. If you re not using virtul disply, cler the virtul disply checkbox on the Add-Remove Virtul Disply screen so tht the mouse pointer moves bck inside the screen's disply re. To subsequently use multi-screen disply function gin, plce check mrk next to the required disply on the Add-Remove Virtul Disply screen. c d e The wireless LAN system for the computer nd ech projector must be the sme. Click Strt, select Progrms (or All Progrms), EPSON Projector, EsyMP Network Projection, nd then click EsyMP Network Projection V2.XX to strt EsyMP Network Projection. Select Quick Connection Mode or Advnced Connection Mode, nd then click OK. When you connect to multiple projectors to project different imges from ech projector, select Advnced Connection Mode. Select Use multi-disply. "Setting Up Multi-Screen Disply" p.40 Arrnging the Multi-Screen Disply (Windows) You cn rrnge the position of ech disply. If you re using virtul disply, enble the virtul disply before rrnging the multi-disply. b If you use n externl disply, connect it to the computer. Check the following items when connecting over wireless LAN nd modify the settings s necessry. If the following items re not set correctly, the multi-screen disply function cnnot be used. The SSID for the computer nd ech projector must be the sme. (For Quick Connection Mode) Disply lyout nd Disply properties options re dded t the bottom of the screen.

42 Projecting Imges Using the Multi-Screen Disply Function 42 g Click the Settings tb. f Click Disply properties. h Drg the displyed monitor icon nd plce it where you wnt the dditionl imge to pper. In the following exmple, the ctul monitor (1) is plced on the left, while the dditionl monitor (3) is plced on the right. The Disply Properties screen is displyed.

43 Projecting Imges Using the Multi-Screen Disply Function 43 i Click OK to close the Disply Properties screen. "Setting Up Multi-Screen Disply" p.40 Arrnging the Multi-Screen Disply (Mc OS X) When the PC hs multiple disply output terminls, the numbers ssigned to the virtul terminls re sequentil to those of the physicl terminls. When n externl monitor is connected s secondry monitor, the imge for tht screen cnnot be projected. Depending on the hrdwre, the number for the secondry monitor my not be "2". When plcing the monitor icons, click the icon to check tht the disply monitor type is not the secondry monitor. When the monitor icons hve been rrnged, displys re connected s shown in this imge. You cn rrnge the position of ech disply. b c d Connect n externl monitor to the computer. Check the following items when connecting over wireless LAN nd modify the settings s necessry. If the following items re not set correctly, the multi-screen disply function cnnot be used. The SSID for the computer nd ech projector must be the sme. (For Quick Connection Mode) The wireless LAN system for the computer nd ech projector must be the sme. Double-click EsyMP Network Projection from the Applictions folder to strt EsyMP Network Projection. Select Quick Connection Mode or Advnced Connection Mode, nd then click OK.

44 Projecting Imges Using the Multi-Screen Disply Function 44 e In Quick Connection Mode, you cnnot connect to multiple projectors nd project different imges to ech projectors. Select Use multi-disply. Disply lyout nd Disply preferences options re dded t the bottom of the screen. f Click Disply preferences.

45 Projecting Imges Using the Multi-Screen Disply Function 45 g The Disply setting screen is displyed. Click Arrngement. i Drg the displyed monitor icon nd plce it where you wnt the dditionl imge to pper. h Cler Mirror Displys. j Close the Disply setting screen. "Setting Up Multi-Screen Disply" p.40 Projecting Imges to the Arrnged Multi-Screen Disply After setting up multi-screen disply, you cn ssign the imges you wnt to project to ech screen. b Open the file you wnt to project. Drg the window to the desired disply, nd ssign where the imge is to be projected.

46 Projecting Imges Using the Multi-Screen Disply Function 46 c Select the projector nd the number you wnt to ssign from Disply to set which imge you wnt to project from which projector. d Click Connect. If you use virtul disply on Windows, you cnnot view the imge being sent to virtul disply on the computer. To djust the imge on the virtul disply, check the projected imge. To perform mouse-bsed opertions on the virtul disply, move the mouse pointer in the direction of the virtul disply so tht the pointer ppers on the virtul disply. e To end projection for multi-screen disply, click Disconnect on the toolbr. The imge ssigned to ech projector is projected. "Setting Up Multi-Screen Disply" p.40

47 Projecting One Computer Screen from Multiple Projectors 47 You cn project one computer screen from up to four projectors simultneously. When you connect to the projectors in Quick Connection Mode, you need to set the sme SSID for ll of the projectors you wnt to connect to. b c Strt EsyMP Network Projection. Windows XP, Windows Vist, nd Windows 7: Click Strt, select Progrms (or All Progrms), EPSON Projector, EsyMP Network Projection, nd then click EsyMP Network Projection V2.XX. Windows 8: Select Serch on the Chrms, nd then select EsyMP Network Projection Ver.X.XX. Mc OS X: Double-click EsyMP Network Projection from the Applictions folder. Select Quick Connection Mode or Advnced Connection Mode, nd then click OK. Select the projectors you wnt to connect to, nd then click Connect. The sme imge is projected from multiple projectors. "Using Additionl Functions" p.33

48 Solving Problems See the following sections to check for solutions to problems you my hve using EsyMP Network Projection. "Solving Network Connection Problems" p.49 "Solving Problems During Projection" p.53 "Error Messges List" p.55 "Event ID List" p.58

49 Solving Network Connection Problems 49 Try these solutions depending on your network environment. "Solving Problems" p.48 "Solutions When You Cnnot Connect Using Quick Connection Mode" p.49 "Solutions When You Cnnot Connect Projectors Using Advnced Connection Mode (Wireless)" p.50 "Solutions When You Cnnot Connect Projectors Using Advnced Connection Mode (Wired)" p.51 Solutions When You Cnnot Connect Using Quick Connection Mode When you cnnot connect the computer nd the projector using Quick Connection Mode, try the following solutions. Check the sttus of the externl devices used for the network connection or the setting environment of the projector. Connect the specified wireless LAN unit to the projector securely. Check for ny obstcles between the computer nd projector, nd chnge their position to improve communiction. Sometimes the indoor environment prevents the projector from being found in serch. Set the rdio strength for the network devices to the mximum. Check the projector's network settings. Set the Connection Mode setting to Quick. Go to Network > Network Configurtion > Wireless LAN > Connection Mode. Set n SSID tht is different from the SSID for the ccess point. Go to Network > Network Configurtion > Wireless LAN > SSID. Set DHCP to Off. Go to Network > Network Configurtion > Wireless LAN > DHCP or Network > Network Configurtion > Wireless LAN > IP Settings > DHCP. Set Wireless LAN Power to On. Go to Network > Network Configurtion > Wireless LAN > Wireless LAN Power. When you enble the security setting, set the sme pssphrse to the computer nd the projector. Close network settings on the projector, nd then return to the LAN stndby screen. Check the computer's network settings. If the wireless LAN dpter is not instlled on your computer, instll wireless LAN crd on your computer. Enble the wireless LAN setting or AirPort on your computer. Check the softwre settings. If nother user hs estblished connection nd the projected imge remins s it is, you cn connect by interrupting the current connection. If Projector Keyword is set for the projector but you do not know the keyword, restrt the projector nd check the keyword displyed on the LAN stndby screen. If you cnnot select or chnge the connection mode, select Disply Connection Mode Selection window on strtup on the Generl settings tb from Set options. The select connection mode screen is displyed fter restrting the softwre.

50 Solving Network Connection Problems 50 "Solving Network Connection Problems" p.49 "Set options - Generl settings" p.66 "Chnging the Computer Projection Source" p.34 Solutions When You Cnnot Connect Projectors Using Advnced Connection Mode (Wireless) When you cnnot connect the computer nd the projector using Advnced Connection Mode over wireless network, try the following solutions. If you cnnot resolve the problem, contct your network dministrtor. Check the sttus of the externl devices used for the network connection or the environment in which the network devices nd the projector re locted. Connect the specified wireless LAN unit to the projector securely. Check for ny obstcles between the ccess point nd the computer or projector, nd chnge their position to improve communiction. Sometimes, indoor environments prevent the projector from being found in serch. Set the rdio strength for the network devices to the mximum. Set the IP ddress, the subnet msk, nd the gtewy ddress for the ccess point correctly. Mke sure the Wireless LAN conforms to , b, g, or n. The Wireless LAN is not comptible with other stndrds such s Check the projector's network settings. Set the Connection Mode setting to Advnced. Go to Network > Network Configurtion > Wireless LAN > Connection Mode. Set the computer, the ccess point, nd the projector to the sme SSID. Go to Network > Network Configurtion > Wireless LAN > SSID. Set DHCP to Off. When DHCP is set to On, it my tke some time to enter LAN stndby sttus if n vilble DHCP server is not found. Go to Network > Network Configurtion > Wireless LAN > DHCP or Network > Network Configurtion > Wireless LAN > IP Settings > DHCP. Set the IP ddress, the subnet msk, nd the gtewy ddress for the projector correctly. Set Wireless LAN Power to On. Go to Network > Network Configurtion > Wireless LAN > Wireless LAN Power. Set the wireless LAN system to meet the stndrds supported by the ccess point. Go to Network > Network Configurtion > Wireless LAN > Wireless LAN system or Wireless LAN Sys. When you enble the security setting, set the sme pssphrse to the ccess point, the computer, nd the projector. Close network settings on the projector, nd then return to the LAN stndby screen.

51 Solving Network Connection Problems 51 Check the computer's network settings. If the wireless LAN dpter is not instlled on your computer, instll wireless LAN crd on your computer. Enble the wireless LAN setting or AirPort on your computer. Connect to the ccess point to which the projector is connected. Turn off the firewll. If you do not wnt to turn it off, register the firewll s n exception. Mke the necessry settings to open the ports. The ports used by this softwre re "3620", "3621", nd "3629". Check the ccess point settings. Set connection permission t the ccess point to llow projectors to connect if ny functions tht block connections, such s MAC Address restrictions nd port restrictions, re set to the ccess point. Check the softwre settings. Select the network dpter you re using from Switch LAN on the Set options screen. If the computer hs multiple LAN environments, connection cnnot be estblished unless the network dpter is selected correctly. If you cnnot find the projector you wnt to connect to using Automtic serch, select Mnul serch to specify the IP ddress. If nother user hs estblished connection nd the projected imge remins s it is, you cn connect by interrupting the current connection. If Projector Keyword is set for the projector but you do not know the keyword, restrt the projector nd check the keyword displyed on the LAN stndby screen. If you cnnot select or chnge the connection mode, select Disply Connection Mode Selection window on strtup on the Generl settings tb from Set options. The select connection mode screen is displyed fter restrting the softwre. "Solving Network Connection Problems" p.49 "Set options - Generl settings" p.66 "Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme" p.24 "Chnging the Computer Projection Source" p.34 Solutions When You Cnnot Connect Projectors Using Advnced Connection Mode (Wired) When you cnnot connect the computer nd the projector using Advnced Connection Mode over wired network, try the following solutions. If you cnnot resolve the problem, contct your network dministrtor. Check the sttus of the externl devices used for the network connection or the environment in which the network devices nd the projector re locted. Connect the network cble securely. Use commercilly vilble 100BASE-TX or 10BASE-T LAN cble. To prevent mlfunctions, use ctegory 5 or higher shielded LAN cble. Check the projector's network settings. Set DHCP to Off. When DHCP is set to On, it my tke some time to enter LAN stndby sttus if n vilble DHCP server is not found. Go to Network > Network Configurtion > Wired LAN > DHCP or Network > Network Configurtion > Wired LAN > IP Settings > DHCP. Set the IP ddress, the subnet msk, nd the gtewy ddress for the projector correctly. Close network settings on the projector, nd then return to the LAN stndby screen.

52 Solving Network Connection Problems 52 Check the computer's network settings. Enble LAN settings on your computer. Windows XP: Check Control Pnel > System > Hrdwre > Device Mnger. Windows Vist, Windows 7, nd Windows 8: Check Control Pnel > System nd Mintennce or System nd Security > Device Mnger. Turn off the firewll. If you do not wnt to turn it off, register the firewll s n exception. Mke the necessry settings to open the ports. The ports used by this softwre re "3620", "3621", nd "3629". Check the softwre settings. Select the network dpter you re using from Switch LAN on the Set options screen. If the computer hs multiple LAN environments, connection cnnot be estblished unless the network dpter is selected correctly. If you cnnot find the projector you wnt to connect to using Automtic serch, select Mnul serch to specify the IP ddress. If nother user hs estblished connection nd the projected imge remins s it is, you cn connect by interrupting the current connection. If Projector Keyword is set for the projector but you do not know the keyword, restrt the projector nd check the keyword displyed on the LAN stndby screen. If you cnnot select or chnge the connection mode, select Disply Connection Mode Selection window on strtup on the Generl settings tb from Set options. The select connection mode screen is displyed fter restrting the softwre. "Chnging the Computer Projection Source" p.34 "Solving Network Connection Problems" p.49 "Set options - Generl settings" p.66 "Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme" p.24

53 Solving Problems During Projection 53 Try these solutions depending on your sitution. "Solving Problems" p.48 "Solutions When the Computer Screen is Not Displyed Properly" p.53 "Solutions When the Screen is Not Projected Properly" p.53 "Solutions When Audio is Not Plyed Properly" p.54 Solutions When the Computer Screen is Not Displyed Properly If there re ny problems with the computer screen, try the following solutions. If the mouse pointer is not displyed on the computer screen, it my hve been moved onto the virtul disply. Cler the virtul disply checkbox on the Add-Remove Virtul Disply screen. The mouse pointer returns to the screen disply re. When you cnnot find some ppliction screen fter you strt it, it my be running on the virtul disply. Cler the virtul disply checkbox on the Add-Remove Virtul Disply screen. If you strt EsyMP Network Projection while PowerPoint is running, slide show might not run. Mke sure PowerPoint is closed nd then strt EsyMP Network Projection nd slide show. If the PowerPoint slide show is not displyed where you wnt when using the multi-screen disply function, use PowerPoint 2003 or lter to mke settings nd use two or more virtul displys. Or, limit the number of displys to one before displying the PowerPoint slide show. "Solving Problems During Projection" p.53 "Enbling the Virtul Disply Driver (Windows)" p.40 Solutions When the Screen is Not Projected Properly If the screen is not projected or there re problems with the project imges try the following solutions. When sending movies, use Advnced Connection Mode or set the Wireless LAN system to to use Quick Connection Mode. Depending on the electromgnetic wve environment, the imge nd sound for movies my stop. If you re using Microsoft Office ppliction, stop moving the mouse pointer. If you move the mouse pointer continuously, the screen my not be refreshed quickly. If the mouse pointer flickers, try the following solutions. Select Mke the movement of the mouse pointer smooth on the Generl settings tb on the Set options screen. Cler Trnsfer lyered window on the Adjust performnce tb on the Set options screen. The Medi Plyer movie plybck screen my not be projected depending on the computer. The screen sver preview my not be projected properly depending on the computer. If you re connected to multiple projectors, the screen trnsfer speed my decrese. When WEP encryption is enbled, the screen trnsfer speed my decrese. "Solving Problems During Projection" p.53 "Set options - Generl settings" p.66 "Set options - Adjust performnce" p.67

54 Solving Problems During Projection 54 Solutions When Audio is Not Plyed Properly If there is no udio coming from the projector, try the following solutions. Audio cn only be trnsferred to one projector. When multiple projectors re connected to one computer, disconnect other projectors nd try gin. Select Output udio from the projector on the Audio Output tb on the Set options screen. If the volume for the computer is set to the minimum while the projector volume is set to the mximum, the noise my be mixed. Turn up the computer's volume nd turn down the projector's volume. "Solving Problems During Projection" p.53 "Set options - Audio Output" p.68

55 Error Messges List 55 When n error occurs, n error messge is displyed on your computer screen. Check for your messge nd follow the instructions here to cler the error. "Solving Problems" p.48 "Error Messges when Strting up EsyMP Network Projection" p.55 "Error Messges when Serching for nd Selecting Projectors" p.56 "Error Messges when Projecting" p.56 Error Messges when Strting up EsyMP Network Projection Error Messges Cnnot strt this ppliction while USB Disply is running. Cnnot strt this ppliction while Quick Wireless Connection is running. EsyMP Network Projection initiliztion filed. Remedy Close USB Disply nd then strt EsyMP Network Projection. Do one of the following to close USB Disply: Windows: Discconnect the USB cble from the projector. Mc OS X: Select Disconnect from the USB Disply icon menu on the menu br or Dock, nd then remove the USB cble. Close Quick Wireless Connection nd then strt EsyMP Network Projection. To close Quick Wireless Connection, perform Externl Device Removl from the icon on the tsk br to remove the Quick Wireless Connection USB Key from the computer. Restrt EsyMP Network Projection. If the messge is still displyed, uninstll nd then reinstll EsyMP Network Projection. Error Messges Network dpter informtion could not be obtined. Cnnot be used with the current OS version. Reinstll EsyMP Network Projection. Remedy Check the following items. A network dpter is instlled on the computer. The driver for the network dpter being used is instlled on the computer. The network dpter is enbled. After checking, restrt the computer nd then restrt EsyMP Network Projection. If you still cnnot connect, check the network settings on the computer nd the network settings on the projector. Reinstll EsyMP Network Projection. "Error Messges List" p.55 "Uninstlling EsyMP Network Projection (Windows XP/Windows Vist/ Windows 7)" p.76 "Uninstlling EsyMP Network Projection (Windows 8)" p.76 "Uninstlling EsyMP Network Projection (Mc OS X)" p.77 "Instlling EsyMP Network Projection (Windows)" p.11 "Instlling EsyMP Network Projection (Mc OS X)" p.11

56 Error Messges List 56 Error Messges when Serching for nd Selecting Projectors Error Messges Cnnot connect to the projector using this version of EsyMP Network Connection. Instll the ltest version of EsyMP Network Projection. Connection to the projector filed. The keyword does not mtch. Re-enter the keyword displyed on the projector screen. Connection filed due to keyword mismtch. Enter the keyword displyed on the projector screen. The selected projector is busy. Do you wnt to continue the connection process? One or more connected projectors do not support resolutions greter thn SXGA. Reduce the screen resolution nd reconnect. Remedy Instll the current version of EsyMP Network Projection from the EPSON Projector Softwre CD-ROM supplied with the projector. You cn downlod the ltest version of EsyMP Network Projection from the Epson Web site. Try connecting gin. If you still cnnot connect to the projector, check the network settings on the computer nd the network settings for the projector. Check the Projector Keyword displyed on the LAN stndby screen, nd enter the Projector Keyword. If you click Yes, connection to the projector is estblished. The projector is disconnected from the other computer. If you click No, connection to the projector is not estblished. The connection between the projector nd the other computer is mintined. There is n uncomptible projector in the connection destintion. Chnge the computer screen resolution to SXGA ( ) or less. Error Messges One or more projectors re not responding. The wireless LAN is off. Turn on the wireless LAN, nd then try serching gin. Remedy Check the network settings on the computer nd the network settings on the projector. Turn on your computer's wireless LAN, nd then try serching for the projector gin. "Error Messges List" p.55 "Supported Resolutions" p.78 "Uninstlling EsyMP Network Projection (Windows XP/Windows Vist/ Windows 7)" p.76 "Uninstlling EsyMP Network Projection (Windows 8)" p.76 "Uninstlling EsyMP Network Projection (Mc OS X)" p.77 "Getting the Ltest Version of the Appliction" p.76 "Instlling EsyMP Network Projection (Windows)" p.11 "Instlling EsyMP Network Projection (Mc OS X)" p.11 Error Messges when Projecting Error Messges XXXXXX ws disconnected. To output udio from the projector, restrt pplictions such s Power- Point or Windows Medi Plyer. Remedy Try connecting gin. If you still cnnot connect to the projector, check the network settings on the computer nd the network settings for the projector. Restrt PowerPoint or Windows Medi Plyer. Audio is then output from the projector.

57 Error Messges List 57 Error Messges You need to restrt your computer to enble Audio Output. Select Yes to restrt now or select No to restrt lter. Remedy To trnsfer udio to the projector nd ply bck, select Yes nd restrt the computer. "Error Messges List" p.55

58 Event ID List 58 When connection error occurs, number indicting the type of error is displyed s follows. Event ID: 04xx Check the numbers nd then pply the following countermesures. If you cnnot resolve the problem, contct your network dministrtor, or contct Epson s described in your projector User's Guide. Event Cuse Remedy ID 0432 Filed to strtup the network softwre. Restrt the projector Network communiction is unstbletion Check the network communic sttus, nd reconnect fter witing for while Cnnot ply trnsferred imges. Restrt the network softwre Communiction ws disconnected from the computer. 04FE The network softwre ended unexpectedly. Check the sttus of network communictions. Restrt the projector. 04FF A system error occurred in the projector Cnnot find n ccess point with the sme SSID The WPA/WPA2 uthentiction type does not mtch The WEP/TKIP/AES encryption type does not mtch Communiction ws disconnected becuse the projector connected to n unuthorized ccess point. Restrt the projector. Set the computer, the ccess point, nd the projector to the sme SSID. Check tht the wireless LAN security settings re correct. Contct your network dministrtor for more informtion. Event ID Cuse Remedy 0898 Filed to cquire DHCP. Check the DHCP server to see if it is operting correctly nd check the LAN cble to see if it is connected correctly. If you re not using DHCP, set DHCP to Off Other communiction errors If restrting the projector or the network softwre does not solve the problem, contct Epson s described in your projector User's Guide. 089A 089B 089C 089D 0B01 0BFF The EAP uthentiction type is not the sme. EAP server uthentiction filed. EAP client uthentiction filed. Key exchnge filed. The built-in storge could not be detected correctly. An error hs occurred in the Whitebord function. "Solving Problems" p.48 Check tht the wireless LAN security settings re correct. Also, check if the certificte is instlled correctly. Perform Delete All Internl Dt. When the internl storge is deleted correctly, plugin the power cord for the projector nd turn it on. If it is not deleted correctly, contct Epson s described in your projector User's Guide. Go to Extended > Whitebord Settings > Internl Storge. Restrt the projector.

59 Screen Summry See these sections for more informtion bout the EsyMP Network Projection screens. "Select Connection Mode Screen" p.60 "Serch nd Connect Screen" p.61 "Profiles" p.64 "Set options" p.66 "Toolbr" p.70 "Movie Sending Mode" p.73 "Add-Remove Virtul Disply" p.74

60 Select Connection Mode Screen 60 When you strt EsyMP Network Projection, the select connection mode screen is displyed. A B Select the connection mode. Select to lwys connect using the selected connection mode. "Screen Summry" p.59

61 Serch nd Connect Screen 61 When you strt EsyMP Network Projection nd select connection mode, one of the following screens is displyed depending on the connection mode you selected. When selecting Quick Connection Mode When selecting Advnced Connection Mode A B Automtic serch Mnul serch In Quick Connection Mode, serches for the projectors bsed on the SSID. In Advnced Conncection Mode, serches for the vilble projectors on the network system to which the computer is connected. In Quick Connection Mode, serches for the projector by using the SSID. In Advnced Conncection Mode, serches for the projector by using n IP ddress or projector nme. C Sttus Indictes the sttus for detected projectors s shown below.

62 Serch nd Connect Screen 62 Stndby Busy Busy (Disble interrupt connection) Currently in use by nother ppliction Serching Not found. Not cquired Avilble. Avilble. When you click Connect, the computer currently connected is disconnected nd your computer is connected. Cnnot be selected. Disble interrupt connection is set on nother computer tht is lredy connected. The projector's Configurtion menu is open. You cn select it fter closing the Configurtion menu nd running the serch gin. Displyed while running Mnul serch or serching with profile. Displyed when projector cnnot be found s result of Mnul serch or serch with profile. Avilble. Displyed when projector with security settings enbled is found in Quick Connection Mode. D Projector nme Displys the projector's nme. E Updte list (Quick Connection Mode only) Updtes Sttus nd Signl intensity. F Disble interrupt connection Select to prevent n interrupt connection by other computers while connected to the selected projector. G Use multi-disply Select when using the multi-screen disply function. When this is selected, Disply lyout nd Disply properties (Disply preferences) re displyed t the bottom of the screen. H Troubleshooting Displys the EsyMP Network Projection Troubleshooting screen. I Connect Connects to the projector you selected from the serch results list. When connection is mde with projector, toolbr is displyed. J Set options Displys the Set options screen to mke option settings such s the processing method when EsyMP Network Projection strts. K Sve in the profile Sves the results of network projector serch s profile. L Cler list Deletes ll serch results. M SSID (Quick Connection Displys the projector's SSID. Mode only) N O P Signl intensity (Quick Connection Mode only) Profile IP ddress (Advnced Connection Mode only) Displys the signl intensity when connection is mde in Quick Connection Mode. As the Signl intensity increses, so does the number of lit indictors. Serches for projector on the network using profile sved using Sve in the profile. Displys the projector's IP ddress. Q Disply Select the disply number (when Use multi-disply is selected).

63 Serch nd Connect Screen 63 "Screen Summry" p.59 "Serching for Network Projectors Automticlly" p.23 "Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme" p.24 "Mking Profile" p.26 "Performing Profile Serch" p.25 "Projecting Imges Using the Multi-Screen Disply Function" p.39 "Set options" p.66

64 Profiles 64 See these sections for more informtion bout the screens for sving nd mnging profiles. If you hve creted folder for profiles. "Screen Summry" p.59 "Sve in the profile" p.64 "Edit profile" p.64 Sve in the profile When you serch for projectors nd click Sve in the profile on the serch nd connect screen, one of the following screens is displyed. If no folder hs been creted. A Profile nme Enter the profile nme. B Sve in Select the folder where you wnt to sve the profile. C Add Registers the projector informtion in the profile. "Profiles" p.64 "Mking Profile" p.26 Edit profile When you click Edit profile on the Set options screen, the Edit profile screen is displyed.

65 Profiles 65 SSID or IP ddress Delete Deletes the selected projector from the profile. When ll projector informtion is deleted, the profile is lso deleted. "Profiles" p.64 "Mking Profile" p.26 A Profile Displys the profile. You cn drg nd drop profiles nd folders to chnge the folder structure. B Copy Duplictes the profile. The copied profile is sved in the sme folder s the originl with the sme nme. C Delete Deletes the profile nd the folder. D Renme Displys the Renme dilog box to renme the folder or the profile. You cn enter up to 32 chrcters in the Renme dilog box. E Export Exports the profile. Exported profiles cn be used s bckup files. You cn import them on nother computer. F Import Lods n exported profile. G Crete folder Cretes new folder. H Projector Displys the projector informtion sved in the profile. nme

66 Set options 66 When you click Set options on the EsyMP Network Projection serch nd connect screen, the Set options screen is displyed. You cn lso ccess Set options by clicking the button on the toolbr. When you ccess Set options from the toolbr, the Generl settings tb is not displyed. "Screen Summry" p.59 "Set options - Generl settings" p.66 "Set options - Adjust performnce" p.67 "Set options - Audio Output" p.68 Set options - Generl settings When you click the Generl settings tb on the Set options screen, the following screen is displyed. Use full-screen video trnsfer Encrypt communictions Disply Connection Mode Selection window on strtup Windows XP only Plys bck movie file t full screen. If the projector does not support movie sending, this function cnnot be set. Select to encrypt nd trnsmit dt. Even if dt is intercepted, it cnnot be decrypted. When using Quick Connection Mode, mke sure you lwys select this checkbox. Set whether or not the Select Connection Mode screen is displyed when EsyMP Network Projection strts. Cler this checkbox once you hve settled on regulr strtup method.

67 Set options 67 Mke the movement of the mouse pointer smooth Use Esy Interctive Tools Use Interctive Pen Serch method on strtup Wireless LAN pssphrse setting files Edit profile Windows XP/Windows Vist/Windows 7 only Select to prevent the mouse pointer from flickering when Trnsfer lyered window is selected in Adjust performnce. (If Windows Aero is selected s the theme for Windows Vist nd Windows 7, this setting turns off Windows Aero.) Select to use Esy Interctive Tools with EsyMP Network Projection. This setting is synchronized with Trnsfer lyered window in Adjust performnce. Select to use the interctive function over network (supported models only). You do not need to connect computer to the projector with USB cble. You cn only use one Esy Interctive Pen t time. Select from the following projector serch methods executed when EsyMP Network Projection is strted. Automtic serch on strtup Specify serch method fter strtup Serch with the lst network configurtion Not vilble for Windows XP. In Quick Connection Mode, SSIDs nd pssphrses re stored on the computer when connecting to projector with security settings enbled. You cn edit nd delete the stored informtion. Edit: Displys the wireless network mngement screen for the computer. Delete ll: Deletes ll the SSIDs nd pssphrses stored on the computer. The Edit profile screen is displyed. Switch LAN Restore Defults Windows only Use this setting if you need to switch the network dpter used to perform serch when computer hs multiple dpters. By defult, ll of the network dpters re used to perform serch. Resets ll djustment vlues for Set options to their defult settings, except for Edit profile nd Switch LAN in Generl settings. "Set options" p.66 "Select Connection Mode Screen" p.60 "Edit profile" p.64 "Serching for Network Projectors Automticlly" p.23 "Serching for Network Projectors by Specifying n SSID, IP Address, or Projector Nme" p.24 Set options - Adjust performnce When you click the Adjust performnce tb on the Set options screen, the following screen is displyed.

68 Set options 68 Trnsfer lyered window Windows XP nd Windows 7 (when Windows 7 Bsic is selected s the theme) only When using lyered window, contents such s messges displyed on the computer re not projected by the projector. Select this to project contents from different lyered window. If the mouse pointer flickers on the screen, select Mke the movement of the mouse pointer smooth in Generl settings. Disble Windows Aero nd improve the trcking of the interctive pen Restore Defults Only vilble when Windows Aero is selected s the theme in Windows Vist nd Windows 7. Select to improve the trcking dely for the interctive pen. Windows Aero is disbled nd interctive pen opertions become smoother. Resets ll djustment vlues for Set options to their defult settings, except for Edit profile nd Switch LAN in Generl settings. Performnce djustment slider Lower the resolution nd trnsfer You cn set the performnce to Fst, Norml, nd Fine. Set to Fst if movie projections re interrupted. Avilble only for projectors with resolution of WUXGA ( ). Select to reduce the size of the dt to be trnsferred to the projector by lowering the resolution. Use this option on slow network or if it tkes too long to disply the imge or projection is interrupted. "Set options" p.66 Set options - Audio Output When you click the Audio Output tb on the Set options screen, the following screen is displyed.

69 Set options 69 "Set options" p.66 Output udio from the projector Restore Defults Select to output the computer's udio from the projector. Cler to output udio from the computer. However, when plying movies with udio in Movie Sending Mode, udio is lwys output from the projector regrdless of this setting. Audio cn only be trnsferred to one projector. Audio cnnot be trnsferred when connected to multiple projectors. Resets ll djustment vlues for Set options to their defult settings, except for Edit profile nd Switch LAN in Generl settings.

70 Toolbr 70 After EsyMP Network Projection strts nd connection is mde with the projector, the toolbr is displyed on the computer screen. You cn use this toolbr to operte nd mke settings for the projector, nd to disconnect the network connection. Select trget projector Stop Show Puse Presenttion Mode Projector control Displys the Select trget projector screen. Click to limit the projectors operted from the toolbr when projecting from multiple projectors using the distribution function or multi-screen disply function. The text below the icon indictes the projectors tht cn be controlled. ALL indictes tht ll of the connected projectors cn be controlled. For exmple, when "1, 3" is displyed, projectors No. 1 nd No. 3 cn be controlled. Stops projection while connected to the projector. A blck screen is projected while stopped. Releses Stop or Puse. Puses projected imges while connecting to the projector. Switches Presenttion Mode between enbled/disbled. Displys the Projector control toolbr. Click to turn the video nd udio on or off, or switch the input source. Screen Preview Set options Movie Sending Mode Disconnect Signl intensity (Quick Connection Mode only) Switch toolbr disply Displys the multi-screen preview screen. Click to disply preview with the settings you hve mde. Click ech disply to enlrge ech Screen Preview to full-screen. Displys the Set options screen. Click to djust the trnsmission performnce during the trnsfer of computer imges. Strts Movie Sending Mode. (Supported models only) Disconnects the connection to the projector. Displys the signl intensity when connection is mde in Quick Connection Mode. As the Signl intensity increses, so does the number of lit indictors. Switches the toolbr disply between Full, Norml, nd Simple. The toolbr disply remins s is until switched gin. "Screen Summry" p.59 "Select trget projector" p.71 "Projector control" p.71 "Hiding Computer Opertions" p.30 "Projecting Only PowerPoint Slide Show" p.35 "Finishing Projecting Imges" p.32 "Set options" p.66

71 Toolbr 71 "Projecting Movies" p.36 Projection hs been pused. Select trget projector When you click the button on the toolbr, the following screen is displyed. During the Presenttion Mode. During the Movie Sending Mode. "Toolbr" p.70 "Serch nd Connect Screen" p.61 "Hiding Computer Opertions" p.30 "Projecting Only PowerPoint Slide Show" p.35 "Projecting Movies" p.36 Projector control A Select the projector you wnt to control. B No. Indictes the number ssigned to the projector. This number ppers under the icon to indicte the number of the projector tht you cn control from the toolbr. C Projector nme Displys the projector's nme. D Disply Displys the disply number you selected on the EsyMP Network Projection serch nd connect screen. E Indictes the following sttus of the projector. Projection hs stopped. Currently projecting. When you click the button on the toolbr, the following toolbr is displyed. A/V Mute Switch PC source Hides nd mutes the video nd udio. Chnges to imges from the input port to which the computer or USB device re connected.

72 Toolbr 72 Chnges to imges from the video input port. Switch video source "Toolbr" p.70 "Hiding Computer Opertions" p.30 "Switching the Input Source" p.30

73 Movie Sending Mode 73 When you click the button on the toolbr nd select projector, the following screen is displyed. H Plys repetedly from the first file in the list. You cnnot repet one specific file if there re multiple files in the list. "Screen Summry" p.59 "Projecting Movies" p.36 A Movie file list Displys list of selected movie files. B Displys the current point in the movie file. You cn drg nd drop the slider to the point where you wnt to strt plying. C Plys the file. D Puses ply bck. E Stops ply bck. F Plys the current file from the beginning. G Plys the next file from the beginning.

74 Add-Remove Virtul Disply 74 During instlltion nd strtup of EsyMP Network Projection on Windows, the Add-Remove Virtul Disply screen is displyed. A Virtul Disply 1 to 4 Select the virtul disply you wnt to use for the multiscreen disply function. You cn select up to four monitors. "Screen Summry" p.59 "Enbling the Virtul Disply Driver (Windows)" p.40

75 Appendix See these sections to lern more bout EsyMP Network Projection softwre. "Updting nd Uninstlling the Softwre" p.76 "Supported Resolutions nd Colors" p.78 "Limittions" p.79 "Notices" p.81

76 Updting nd Uninstlling the Softwre 76 Follow these instructions to updte or uninstll EsyMP Network Projection. "Appendix" p.75 "Getting the Ltest Version of the Appliction" p.76 "Uninstlling EsyMP Network Projection (Windows XP/Windows Vist/ Windows 7)" p.76 "Uninstlling EsyMP Network Projection (Windows 8)" p.76 "Uninstlling EsyMP Network Projection (Mc OS X)" p.77 Getting the Ltest Version of the Appliction You cn downlod the ltest version of EsyMP Network Projection from the EPSON Web site. Visit nd select your loction. "Updting nd Uninstlling the Softwre" p.76 Uninstlling EsyMP Network Projection (Windows XP/Windows Vist/Windows 7) For Windows XP, Windows Vist, nd Windows 7, follow the instructions below to uninstll EsyMP Network Projection. You need dministrtor uthority to uninstll the softwre. Turn on your computer. b Mke sure ll running pplictions re closed. c Click Strt, nd then click Control Pnel. d e f Do one of the following. Windows XP: Double-click Add or Remove Progrms. Windows Vist nd Windows 7: Click Uninstll progrm from the Progrms ctegory. Select EsyMP Network Projection, nd then do one of the following. Windows XP: Click Chnge/Remove. Windows Vist nd Windows 7: Click Uninstll/Chnge. Follow the on-screen instructions. "Updting nd Uninstlling the Softwre" p.76 Uninstlling EsyMP Network Projection (Windows 8) For Windows 8, follow the instructions below to uninstll EsyMP Network Projection. You need dministrtor uthority to uninstll the softwre. Turn on your computer.

77 Updting nd Uninstlling the Softwre 77 b c d e f Mke sure ll running pplictions re closed. Select Serch on the Chrms, nd then serch EsyMP Network Projection. Right-click (press nd hold) EsyMP Network Projection Ver.X.XX, nd then select Uninstll from the pp br. Select EsyMP Network Projection, nd then select Uninstll. Follow the on-screen instructions. "Updting nd Uninstlling the Softwre" p.76 "Updting nd Uninstlling the Softwre" p.76 Uninstlling EsyMP Network Projection (Mc OS X) For Mc OS X, follow the instructions below to uninstll EsyMP Network Projection. b c d e Turn on your computer. Mke sure ll running pplictions re closed. Open the Applictions folder. Open the EsyMP Network Projection - Tools folder, nd then double-click EsyMP Network Projection Uninstller.pp. Follow the on-screen instructions.

78 Supported Resolutions nd Colors 78 Check these sections for the computer screen resolutions nd the number of colors tht EsyMP Network Projection cn project. "Appendix" p.75 "Supported Resolutions" p.78 "Disply Color" p.78 Disply Color The following number of computer screen colors cn be projected. Windows Mc OS X 16-bit color Approx. 32,000 colors (16-bit) 32-bit color Approx million colors (32-bit) Supported Resolutions The following computer screen resolutions cn be projected. You cnnot connect to computer with resolution greter thn WUXGA. VGA ( ) SVGA ( )* XGA ( )* SXGA ( ) SXGA ( ) SXGA+ ( )* WXGA ( )* WXGA ( )* WXGA+ ( )* UXGA ( ) WUXGA ( ) * Supported resolutions when the multi-screen disply function is on. When using computer screen with unique spect rtio, the resolution is incresed or decresed depending on the resolution of the computer nd the projector to void impiring imge qulity. Depending on the resolution, the verticl or horizontl mrgins my be projected in blck. The opertionl gurntee for multi-screen disply is 16-bit nd 32-bit color. "Supported Resolutions nd Colors" p.78 "Supported Resolutions nd Colors" p.78

79 Limittions 79 Check these sections for restrictions pplied when projecting computer imges while using EsyMP Network Projection. "Appendix" p.75 "Connection Limittions" p.79 "Limittions when Projecting from Windows Photo Gllery or Windows Live Photo Gllery" p.79 "Limittions in Windows Aero" p.79 "Limittions when Projecting from Windows Medi Center" p.80 Connection Limittions Note the following limittions when using EsyMP Network Projection. If the trnsmission speed of the wireless LAN is low, the network my disconnect unexpectedly. Applictions tht use prt of DirectX functions my not be displyed correctly (Windows only). You cnnot project full-screen MS-DOS prompts (Windows only). There re times when the imge on the computer screen nd the imge projected by the projector my not mtch exctly. Movies re not plyed s smoothly s they re on computer. "Limittions" p.79 Slideshow is plyed bck in simple mode when projecting from Windows Photo Gllery or Windows Live Photo Gllery. Becuse the toolbr is not displyed, you cnnot chnge the Theme (effects) while plying slide show, regrdless of the Windows Experience Index rting. Once simple mode hs strted, you cnnot chnge modes while Windows Photo Gllery or Windows Live Photo Gllery is running, even if you close EsyMP Network Projection. Restrt Windows Photo Gllery or Windows Live Photo Gllery. You cnnot ply movies. "Limittions" p.79 Limittions in Windows Aero Note the following limittions when the window design for your computer is Windows Aero. The lyered window is projected regrdless of the Trnsfer lyered window setting on the Set options screen in EsyMP Network Projection. For exmple, when Trnsfer lyered window for the EsyMP Network Projection toolbr is disbled, it is not projected even if it is displyed on the computer screen. However, the toolbr is projected. Limittions when Projecting from Windows Photo Gllery or Windows Live Photo Gllery Note the following limittions when lunching Windows Photo Gllery or Windows Live Photo Gllery when using EsyMP Network Projection.

80 Limittions 80 A few minutes fter you connect computer to the projector over network with EsyMP Network Projection, the following messge my be displyed. If udio stops during plybck when trnsferring udio from the computer to the projector using EsyMP Network Projection, try restrting the ppliction you re using. "Limittions" p.79 It is recommended tht you select Keep the current color scheme, nd don't show this messge gin. This selection is enbled until the computer is restrted. "Limittions" p.79 Limittions when Projecting from Windows Medi Center Note the following limittions when projecting from Windows Medi Center. You cnnot project imges in full screen mode using Windows Medi Center. Switch to window disply mode to project the imges.