Preupgrade. Preupgrade overview

Size: px
Start display at page:

Download "Preupgrade. Preupgrade overview"

Transcription

1 overview, page 1 Virtual contact center upgrades, page 2 Common Ground preupgrade task flow, page 3 Technology Refresh preupgrade task flow, page 5 Common Ground preupgrade tasks, page 6 Technology Refresh preupgrade task, page 12 Common preupgrade tasks, page 12 overview The preupgrade process ensures that your systems have the necessary software to support your contact center. These tasks prepare the way for a successful upgrade of your Cisco contact center components to the new release. tools During the preupgrade process, use the following tools as required: Subskills Group Evaluator (SSGE) Utility Detects the existence of subskill groups, which cause upgrade failure in upgrades to Release Subskill groups are no longer supported as of Release 9.0, making this tool a requirement for upgrades from Release 8.x to Release The SSGE Utility is delivered with the Enhanced Database Migration Tool (EDMT), which you can download from Cisco.com. Common Ground Upgrade Tool (CGUpgradeBackup.exe) Used to back up and restore all Unified CCE databases (logger db, AW db, HDS db, and BA db as applicable) when you upgrade from SQL Server 2005 to SQL Server 2008 R2. Used in Common Ground upgrades from Version 8.5(2) and later (SQL Server 2005) to Version 10.0 (SQL Server 2008 R2) only. You can download the Common Ground Upgrade Tool from Cisco.com. User Migration Tool A standalone Windows command-line application used for all upgrades that involve a change of domain. The tool exports all existing user accounts (config/setup and supervisors) in the source domain into a flat file. The file is used in the target domain during the upgrade. 1

2 Virtual contact center upgrades You can download the User Migration Tool from Cisco.com. Regutil Tool Used in Technology Refresh upgrades, exports the Cisco Systems, Inc. registry from the source machine during the preupgrade process. The output of the tool is required on the destination machine when running the Unified CCE Installer during the upgrade process. You can download the Regutil Tool from Cisco.com. Cisco Unified Intelligent Contact Management Database Administration (ICMDBA) Tool Used to create new databases, modify or delete existing databases, and perform limited SQL Server configuration tasks. The ICMDBA Tool is delivered with the main installer. Domain Manager Used to provision Active Directory. The Domain Manager Tool is delivered with the main installer. Virtual contact center upgrades Unified CCE now supports only deployments in virtual environments. Depending on your existing contact center, your upgrade path is one of the following: Physical-to-Virtual (P2V) An upgrade of a bare-metal deployment to a virtual R10 deployment. Virtual-to-Virtual (V2V) An upgrade of an existing virtual deployment to a virtual R10 deployment. As shown in the following diagram, a P2V upgrade is always a Tech Refresh upgrade. But, a V2V upgrade can be either a Tech Refresh or a Common Ground upgrade. For Tech Refresh upgrades, the general process is as follows: 1 Install the latest supported version of VMware vsphere ESXi Hypervisor on the target server. 2 Create the VMs for the Unified CCE components. 3 Follow the Tech Refresh process for Unified CCE. 2

3 Common Ground preupgrade task flow For Common Ground upgrades, the general process is as follows: 1 Stop all Unified CCE application services and set them to manual start. 2 Stop the VMs. 3 Upgrade the host server to vsphere ESXi 5.0. Note Unified CCE R10 supports ESXi 5.0 as a transitional step for upgrades. Do not use ESXi 5.0 in a R10 production environment. 4 Update the VM hardware version on each VM in the current upgrade window through the vsphere Client. 5 Update the properties of each VM to match the properties of the appropriate OVA. Check the Virtualization DocWiki for descriptions of each OVA. 6 Start the VMs and upgrade the VMware Tools. 7 Upgrade the Unified CCE components on each VM in that upgrade window. 8 Stop the VMs. 9 Upgrade the server to the latest supported version of vsphere ESXi for Unified CCE R10. See the Virtualization DocWiki for support information. 10 If necessary, update the VM hardware version for the new vsphere ESXi. 11 Upgrade the VM Tools. 12 Reset all Unified CCE application services to start automatically. For details on installing and upgrading vsphere on UCS servers, see Cisco UCS B-Series Blade Servers VMware Installation Guide and Cisco UCS C-Series Servers VMware Installation Guide. For version-specific information on the VM properties in an OVA, see the following Virtualization DocWiki pages: OVA Template Details for Unified Contact Center Enterprise Release 8.x OVA Template Details for Unified Contact Center Enterprise Release 9.x OVA Template Details for Unified Contact Center Enterprise Release 10.x Common Ground preupgrade task flow Perform the following Common Ground preupgrade tasks in any order: Note The Common Ground upgrade assumes the host server runs on Windows Server 2008 R2. To upgrade from Windows Server 2003, use the Tech Refresh upgrade. 3

4 Common Ground preupgrade task flow Task 8.5(2)+ to x to 10.0 See Review target release notes Cisco Unified Contact Center Enterprise Release Notes Download the Enhanced Database Migration Tool Download the Enhanced Database Migration Tool, on page 14 Back up the server registry Use established processes Copy ICM directory on all system nodes Use established processes Run the following and save the results: ipconfig -all Use established processes route print -p netstat -a Create bootable image of operating system and network configuration Use established processes Determine the size of the current Logger and HDS databases Determine the size of the current Logger and HDS databases, on page 15 Back up Logger, HDS, BA databases using Microsoft SQL Server Backup and Restore utility Microsoft SQL Help Detect and remove subskill groups no Detect and remove subskill groups, on page 6 Upgrade from SQL Server 2005 to SQL Server 2008 R2 (SP1 or SP2) no Upgrade from SQL Server 2005 to SQL Server 2008 R2, on page 7 If moving to new domain, migrate Active Directory and DNS to non-unified CCE servers Migrate Active Directory and DNS, on page 9 If moving to a new domain, export Active Directory users Migrate Active Directory users, on page 13 Set up temporary Administration & Data Servers (if necessary) Set up temporary Administration & Data Servers, on page 16 4

5 Technology Refresh preupgrade task flow Task 8.5(2)+ to x to 10.0 See Notify all stakeholders, including: Cisco Technical Assistance Center (TAC) Local Cisco Representatives Customer Operations and Emergency Management Center Third-party vendors as applicable Technology Refresh preupgrade task flow Perform the following Technology Refresh preupgrade tasks in any order: Task (Version 8.x or 9.x to Version 10.0) Obtain licenses Review target release notes Back up Logger, HDS, BA databases using Microsoft SQL Server Backup and Restore utility. (To be used in case of an upgrade failure.) Create bootable image of operating system and network configuration Run the following and save the results: ipconfig -all route print -p netstat -a Determine the size of the current Logger and HDS databases. Disable configuration changes Export server registry Install Active Directory and DNS See Cisco Product License Registration Web Site Cisco Unified Contact Center Enterprise Release Notes Microsoft SQL Help Use established processes Use established processes Determine the size of the current Logger and HDS databases, on page 15 Disable configuration changes, on page 12 Export the server registry, on page 12 Set up Active Directory 5

6 Common Ground preupgrade tasks Task (Version 8.x or 9.x to Version 10.0) Export Active Directory users Download the Enhanced Database Migration Tool Set up temporary Administration & Data Servers (if necessary) See Migrate Active Directory users, on page 13 Download the Enhanced Database Migration Tool, on page 14 Set up temporary Administration & Data Servers, on page 16 Notify all stakeholders, including: Cisco Technical Assistance Center (TAC) Local Cisco Representatives Customer Operations and Emergency Management Center Third-party vendors as applicable Common Ground preupgrade tasks Detect and remove subskill groups As of Version 9.0(1), subskill groups are not supported. You cannot upgrade to Unified CCE 10.0 until all subskill groups are removed from the older system. Any attempt to upgrade to Unified CCE 10.0 while subskill groups are present fails. Detect subskill groups To determine if subskill groups are present, run the SSGE utility (which is part of the EDMT tool) to assess existing databases. If these groups are present, a report is generated indicating cross references between subskill groups, base skill groups, enterprise skill groups, agent memberships, and routing scripts. Remove all detected subskill groups before the upgrade. Open the EDMT tool. To run the SSGE, enter the following command from the EDMT directory: subskilleval -server <server name or ip> -port <SQL server port> -domain <domain name> -user <user name> -password <password> Example: subskilleval -server port domain CISCO -user sa -password fullrights The resulting report in the file sub-skill-report.html includes the following data: How many Unified CCE subskill groups were found 6

7 Upgrade from SQL Server 2005 to SQL Server 2008 R2 List of subskill groups List of agents associated with the subskill groups List of base skill groups List of enterprise skill groups List of affected routing scripts Remove subskill groups If the SSGE detects subskill groups in use (calls routed to or through them), perform the following steps to remove them. Step 5 Step 6 Step 7 Step 8 Step 9 Create a new enterprise skill group for each subskill group. Create a new enterprise skill group for each base skill group. Then, add the new enterprise skill groups created in (as subskill group replacements) as members to these new enterprise skill groups. Alter agent memberships to point to the new skill groups. Alter routing scripts to use the new enterprise skill groups, and remove the old script versions. Modify existing enterprise skill groups by removing the previous subskill groups. Add corresponding new skill groups if appropriate. Verify scripts and call flows. Adjust Cisco Unified Intelligence Center report templates to point to the new skill groups. Remove all subskill groups. Before removing subskill groups, remove all references to the subskill groups from scripts, enterprise skill groups, or agent memberships. Rerun the SSGE utility to verify that subskill groups are no longer present. Upgrade from SQL Server 2005 to SQL Server 2008 R2 If your system still has SQL Server 2005 installed, upgrade to SQL Server 2008 R2 (SP1 or SP2). Back up SQL Databases and uninstall SQL Server 2005 Use the CGUpgradeBackup tool to back up the SQL database before you uninstall it and upgrade to SQL Server 2008 R2. During backup, the CGUpgradeBackup tool also updates the Registry Access Permission (BUILTIN\ Administrators) for the DB-Lib registry 7

8 Upgrade from SQL Server 2005 to SQL Server 2008 R2 (SOFTWARE\\Wow6432Node\\Microsoft\\MSSQLServer\\Client\\DB-Lib). Optionally, to set this registry permission without backup, use the following command: CGUpgradeBackup- regperm If you completed regular backups using a tool other than the CGUpgradeBackup tool, make sure that you set the Registry Access Permission using the -regperm option before you uninstall SQL Server You can then restore your backed-up database using the CGUpgradeBackup tool with the -restore option. To obtain the CGUpgradeBackup tool, go to In the bottom pane, under the Support heading, select Downloads. In the table, select Products > Voice and Unified Communications > Customer Collaboration > Cisco Unified Contact Center Products > Cisco Unified Contact Center Enterprise. On the Select a Software Type page, select Contact Center Enterprise Tools. Click Download next to the desired tool. To back up the SQL databases using CGUpgradeBackup.exe, from the command prompt, execute the following command: CGUpgradeBackup -backup -sh <complete path to local backup folder> Uninstall SQL Server 2005 completely from the system. Install SQL Server 2008 R2 The process for installing SQL Server 2008 R2 (SP1 or SP2) is the same as for a fresh installation. See the installation procedure for this task. Related Topics Install Microsoft SQL Server Restart SQL Server service and restore SQL databases Step 5 Step 6 Open Server Manager. In the left pane, navigate to Configuration > Services. In the right pane, navigate to SQL Server (MSSQLSERVER) and click the Restart icon. When the Restart Other Services dialog box appears, click Yes. Open the SQL Server Management Studio and select No in the Import customized user setting from SQL 2005 and SQL 2005 management studio registered servers dialog box. To restore the SQL databases using CGUpgradeBackup.exe, from the command prompt, execute the following command: CGUpgradeBackup -restore -sh <complete path to local backup folder > Note: To restore the SQL databases in the default location and delete the backup folder after the restore process is finished, from the command prompt, execute the following command: CGUpgradeBackup -restore -sh <complete path to local backup folder > -noprompt 8

9 Migrate Active Directory and DNS Migrate Active Directory and DNS Install Active Directory on new domain controller Step 5 Step 6 Step 7 Step 8 Step 9 0 Select Start > Run, enter dcpromo and click OK. When the Active Directory Wizard opens, click Next. Under Domain Controller Type, select Additional Domain Controller for an Existing Domain. On the Network Credentials screen, enter the domain administrator username and password. The Additional Domain Controller screen should already be filled in with the FQDN (Fully Qualified Domain Name). Accept the database and log location defaults. Accept the shared System Volume defaults. Enter the same Restore Mode Admin password that you used for the root domain controller. Check Summary Settings. Active Directory is not configured through NETLOGON. Reboot after the Active Directory installation is complete. Repeat these steps for a new alternate domain controller if necessary. Install DNS Step 5 Step 6 Step 7 Select Settings > Control Panel > Add/Remove Programs. Select Add\Remove Windows Components, and then select Networking Services > Details. Check the DNS check box. Select OK, and then click Next. Browse to Windows Server 2008 R2 CD DNS installs. Validate that all DNS Zones were replicated from the first DNS Server in the Active Directory Domain to this DNS Server. Repeat this installation for the new secondary DNS server (if required). 9

10 Migrate Active Directory and DNS Configure Active Directory sites on new domain controller Move the new domain controller to the correct sites. Move Flexible Single Master Operation roles On the Active Directory Domain Controller that is hosting the role to be moved, open AD Users and Computers, and connect to the domain controller from which the role needs to be moved. Right-click under the domain name and select Operations Masters. Under the required FSMO role tab, change the Operations Master to the designated domain controller. Redefine the time source Because the Primary Domain Controller Emulator is moving to another Domain Controller, the time source must be redefined as either that server or an external time source. On the server that is currently running the Primary Domain Controller Emulator, run the following command: Net time /setsntp: <DNS name of time source> To synchronize a member server to the time source, see the procedure available on the Microsoft Website. Assign Global Catalogs Open AD Sites and Services. Connect to the Domain Controller that is designated as the Global Catalog. Right-click NTDS Settings, click Properties, check Global Catalog, and click OK. Repeat this procedure on all servers. 10

11 Migrate Active Directory and DNS Configure member servers to point to new DNS servers Step 5 Step 6 In the Network Settings, open the visible network connection. Open TCP/IP properties. Enter the new primary and alternate DNS servers. Run ipconfig /flushdns from a command prompt. Verify name resolution by pinging the Unified CCE servers by name. Ping the Unified CCE domain by name. Demote current domain controllers to member servers and uninstall DNS Important Before demoting domain controllers, make sure that the replication process from the old domain controllers to the new domain controllers is complete. Check the directory service with the event viewer to monitor the status. In a large domain, this process could take 30 minutes or more to complete. Step 5 Step 6 Step 7 Step 8 Step 9 0 Select Start > Run, enter dcpromo. When the Active Directory Wizard opens, click Next. A dialog box indicating that this server is already a Domain Controller appears. Click Next to demote it to a member server. You are warned and prompted as to whether or not this is the last server in the domain. Leave the box unchecked and click Next. The subsequent screens show the progress of the domain controller removal. Click Next to finish. Repeat this procedure for the alternate domain controller. Select Start > Settings > Control Panel > Add/Remove Programs. Select Add/Remove Windows Components > Networking Services. Click Details. Uncheck the DNS check box, then click OK. Click Next. 11

12 Technology Refresh preupgrade task Technology Refresh preupgrade task Export the server registry Export the Cisco registry on each source machine that is involved in a Technology Refresh upgrade. You use the exported Cisco registry to set up your Routers, Loggers, and Cisco Outbound Option dialers. During the upgrade process, you are prompted for the path to the exported registry file location. Perform the following procedure and note the location of the resulting file for later in the upgrade process. Each time you run the RegUtil with the export option, if a RegUtil_<hostname>.dat file exists, the utility renames that file to RegUtil_<hostname>.dat.bak<number>. Open a command prompt and change the directory to the location where the RegUtil.exe resides. Run the RegUtil tool to export the Cisco Systems, Inc. registry using the following command: RegUtil -export [target directory] The target directory must have write access. Therefore, you cannot select the install media on a DVD. The target directory is optional. If it is not specified, the tool outputs the result of the Registry export to the current directory. The output filename is of the format RegUtil_<hostname>.dat, where hostname is the name of the source machine. Common preupgrade tasks Disable configuration changes Perform this step on one side only. It is automatically replicated to the other side. To disable configuration changes during the upgrade, set the following registry key to 1 on the Side A Call Router: HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\ICM\<instance name>\router A\Router\CurrentVersion\Configuration\Global\DBMaintenance. Confirm that configuration changes are disabled by attempting to save a configuration change. When you try to save the change, a message is displayed confirming the change failure. 12

13 Stop active services Stop active services You must stop all Unified CCE services from the Service Control Manager before you begin the upgrade. You must also stop and restart the SQL Server (MSSQLSERVER) service. Migrate Active Directory users Export users from the source domain Back up the Logger database for each Unified ICM/CCE & Hosted instance using Microsoft SQL Server tools. On the Logger system, for each installed Logger instance, execute the User Migration Tool in Export mode. An output file (umt_<facility name>_<logger database name>.bin) is generated in the directory from which the tool is executed. In a Technology Refresh upgrade scenario: a) Copy the output file to the Logger system in the target domain (to the folder from which the User Migration Tool will be run on the target system). b) Back up and export the registry on the source system. c) Check the log file for any errors. Import users into the target domain Shut down the Unified ICM/CCE & Hosted services if they are running. If the domain name must be changed in a Common Ground upgrade scenario, see Change domain name, on page 14 and proceed to. In a Technology Refresh upgrade scenario: a) Make sure the exported file exists in the Logger system. b) Restore the Logger database that was copied from the source Logger system using Microsoft SQL Server tools. 13

14 Download the Enhanced Database Migration Tool c) Import the Unified ICM/CCE & Hosted registry exported from the source domain. Run the User Migration Tool in Import mode for each Logger instance to migrate users. Step 5 (Optional) Run the User Migration Tool in verify mode to validate the migration. Step 6 For duplex Logger systems, run the ICMDBA tool to synchronize sides A and B. Step 7 Restart the Unified ICM/CCE & Hosted services if they were previously running. Change domain name To change the domain for a system, you must have the necessary permissions. To change the domain for all instances on the machine, complete the following steps: Step 5 Step 6 Step 7 Open the Web Setup tool. Click the Instance Management tab. Delete any instances and facilities that you do not want to use in the new domain. Open the Domain Manager tool and ensure that the instances and facilities that are defined match what is actually on the machine. Failure to do this causes the Web Setup Change Domain operation to fail. Select the instance to be modified, and then click Change Domain. The Change Domain page opens, displaying the currently configured domain and the new domain name of the machine. Click Save. A query is sent to confirm that you want to change the domain. Click Yes. If successful, you are returned to the Instance List page. If the instance does not exist, you must create it using the Domain Manager. Create the instance under the selected Facility in the new domain. Download the Enhanced Database Migration Tool The Enhanced Database Migration Tool (EDMT) includes a subskills group evaluator (SSGE) utility. You use the utility during the preupgrade process for Common Ground upgrades only from Release 8.x to Release During the upgrade process for both Common Ground and Technology Refresh upgrades, the EDMT migrates the data schema for all Unified CCE databases (Logger, Administration and Data Server HDS, and BA if applicable) to the Release 10.(x) database schema. For Common Ground upgrades, you install the tool on the source server. In this case, you migrate the Logger or HDS databases in place. The existing database schemas are modified from the baseline version to the level of Unified CCE 10.0(x). For Technology Refresh upgrades, you install the tool on the destination server. In this case, EDMT automatically performs a backup of the source databases onto the new destination server. Next, EDMT restores 14

15 Determine the size of the current Logger and HDS databases the backup to the destination databases and performs a Common Ground migration on the newly restored database. The backup file that is created is automatically deleted. When you run the EDMT, you can choose to run either edmt.exe, or edmt.bat. The only difference between the two is that when you run the edmt.bat, the console window remains open. To obtain the EDMT tool, go to In the bottom pane, under the Support heading, select Downloads. In the table, select Products > Voice and Unified Communications > Customer Collaboration > Cisco Unified Contact Center Products > Cisco Unified Contact Center Enterprise. On the Select a Software Type page, select Cisco Enhanced Data Migration Tool Software Releases. Click Download next to the desired tool. Determine the size of the current Logger and HDS databases When migrating from an older Unified CCE release to a newer release, you must know the database size of the existing Logger and HDS databases, to create databases of adequate size. Depending on usage patterns, increase the database size for future requirements. Although applicable to both Common Ground and Technology Refresh upgrades, this task is particularly important to Technology Refresh upgrades. In Technology Refresh upgrades, changes in hardware can have a greater impact on data store requirements. You can find the database size by using either the ICMDBA tool or Microsoft SQL Server Management Studio. Determine database size using ICMDBA Step 5 Select Start > Run. In the Run dialog box, type cmd and click OK. At the command prompt, type icmdba. Navigate to the Logger/HDS database. Right-click cust_sidex, select Properties, and note the database size. 15

16 Set up temporary Administration & Data Servers Determine database size using SQL Server Management Studio Step 5 Step 6 Step 7 Step 8 On the SQL Server systems, launch Start > Programs > Microsoft SQL Server 2008 R2 > SQL Server Management Studio. Enter the required database connection information. Select Windows Authentication. Click Connect. The Microsoft SQL Server Management Studio application opens. Navigate to Databases > System Databases > master. Right-click the master database and select New Query. On the right side of the window, a query window opens. Enter EXECUTE sp_helpdb into the Query window and execute the script by clicking the green arrow or by pressing F5. Note the value located in the db_size column for the database. Set the temporary database size Ensure that the Tempdb log is expandable to 3 GB. Select Start > Programs > Microsoft SQL Server 2008 R2 > SQL Server Management Studio. Connect to the instance. Expand Databases, and then System Databases, then right-click on the tempdb database, and select Properties. Click the Files tab and set the templog parameters as required. Set up temporary Administration & Data Servers Depending on your maintenance windows and upgrade sequence, you can require one or two temporary Administration & Data Servers for configuration and reporting during or between maintenance windows. These temporary servers support configuration changes and the reporting load while the main Administration & Data Servers are upgraded. If you complete the upgrade of the main Administration & Data Server within the Logger purge window (usually 14 days), you can replace the temporary Administration & Data Servers with the upgraded Administration & Data Servers for reporting. The data replication process fills in any missing data. The SQL Server version of all temporary Administration & Data Servers must match the main base version (SQL Server 2005 or 2008 R2) and the main target version (SQL Server 2008 R2). 16

17 Set up temporary Administration & Data Servers The following diagram shows a scenario where one (base version) temporary Administration & Data Server supports configuration and reporting during an upgrade. In this scenario, one Administration & Data Server is deployed for both Sides A and B. The following diagram shows the scenario where one (base version) and one (target version) temporary Administration & Data Server supports reporting during an upgrade. In this scenario, one Administration & Data Server is deployed for Side A and another is deployed for Side B. 17

18 Set up temporary Administration & Data Servers Run the ICM-CCE-CCHInstaller on supported hardware. Use the Web Setup tool to configure a temporary Administration & Data Server-HDS, pointing it to the desired Logger and Call Router. 18

Common Ground Upgrade

Common Ground Upgrade Preupgrade Overview, on page 1 Common Ground Preupgrade Task Flow, on page 2 Common Ground Preupgrade Tasks, on page 3 Task Flow, on page 7 Tasks, on page 11 Preupgrade Overview The preupgrade process

More information

Common Ground Upgrade

Common Ground Upgrade Preupgrade Overview, on page 1 Common Ground Preupgrade Task Flow, on page 2 Common Ground Preupgrade Tasks, on page 4 Upgrade Overview, on page 7 Task Flow, on page 10 Tasks, on page 14 Preupgrade Overview

More information

Upgrade Side A. Upgrade Side A Tasks

Upgrade Side A. Upgrade Side A Tasks Tasks, page 1 Unified CVP Reporting Server Preupgrade s, page 7 Common Software Upgrade s, page 9 Finesse Upgrade s, page 13 Unified Intelligence Center Upgrade s, page 13 Unified Contact Center Enterprise

More information

User Migration Tool. User Migration Tool Prerequisites

User Migration Tool. User Migration Tool Prerequisites Prerequisites, page 1 Features, page 2 Migration Scenarios, page 2 Internationalization (I18n) and Localization (L10n) Considerations, page 3 Security Considerations, page 3 User Migration Steps, page

More information

Cisco Unified CCE Data Server

Cisco Unified CCE Data Server This chapter contains the configuration procedures you must perform for the Unified CCE Data Servers on Side A and Side B. Configure SQL Server, page 1 Configure Domain Manager, page 2 Set Up the Instance,

More information

Core Component Installation

Core Component Installation Core Components Installation Approach, page 1 Golden Template Requirements, page 2 Common s for Golden Templates, page 14 Core Components Installation Approach You can use golden templates to clone and

More information

Upgrade from a Standalone Deployment to a Coresident Deployment (Cisco Unified Intelligence Center with Live Data and IdS)

Upgrade from a Standalone Deployment to a Coresident Deployment (Cisco Unified Intelligence Center with Live Data and IdS) Upgrade from a Standalone Deployment to a Coresident Deployment (Cisco Unified Intelligence Center with Live Data and IdS) Upgrade from a Standalone to a Co-resident Deployment, on page 1 Set Deployment

More information

Upgrade System Requirements

Upgrade System Requirements Upgrade System s Upgrade to Release 11.6(1), page 1 Supported Upgrade Paths, page 2 NTP Configuration s, page 3 Preupgrade System s, page 3 Upgrade to Release 11.6(1) You can upgrade to Cisco Unified CCE,

More information

Installing the Cisco Unified MeetingPlace Web Server Software

Installing the Cisco Unified MeetingPlace Web Server Software Installing the Cisco Unified MeetingPlace Web Server Software Release 8.5 Revised: 2/19/13 : Install the Application Server (which includes the Software Media Server) : Install the Hardware Media Server

More information

Unified CVP Migration

Unified CVP Migration If there is a change in platform of a later release of Unified CVP, migration from the existing release to the later release is required. For example, moving from Unified CVP 10.5(1) to Unified CVP 11.5(1)

More information

Cisco Unified Contact Center Enterprise Installation and Upgrade Guide, Release 11.0(1)

Cisco Unified Contact Center Enterprise Installation and Upgrade Guide, Release 11.0(1) Cisco Unified Contact Center Enterprise Installation and Upgrade Guide, Release 11.0(1) First Published: August 26, 2015 Last Modified: November 19, 2015 Americas Headquarters Cisco Systems, Inc. 170 West

More information

Software Installations for Components

Software Installations for Components Install Microsoft Windows Server, page 1 Install VMware Tools, page 3 Configure Network Adapters for Unified CCE Call Server and Unified CCE Data Server, page 4 Set Persistent Static Routes, page 5 Run

More information

Create Golden Template

Create Golden Template Create Golden Template A golden template is an image of a virtual machine that the service provider can use as a master copy to create and provision new virtual machines. This chapter contains the procedures

More information

Replace Single Server or Cluster

Replace Single Server or Cluster Caution Because this process is designed to work as a server replacement, you must perform it in the live environment. Cisco does not recommend doing this process on a dead net because a duplication of

More information

Cisco Business Edition 7000 Installation Guide, Release 10.6

Cisco Business Edition 7000 Installation Guide, Release 10.6 First Published: July 08, 2015 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text

More information

Migration to Unified CVP 9.0(1)

Migration to Unified CVP 9.0(1) The Unified CVP 9.0(1) requires Windows 2008 R2 server. The Unified CVP versions prior to 9.0(1) run on Windows 2003 server which do not support the upgrade to Unified CVP 9.0(1). Unified CVP supports

More information

The Unified CVP upgrade process has been described in this chapter in the following sections:

The Unified CVP upgrade process has been described in this chapter in the following sections: Cisco voice solution components upgrade is a multistage process; solution components are grouped in several stages for upgrading. Users must follow the solution level upgrade order mentioned in the Upgrade

More information

Installation. Power on and initial setup. Before You Begin. Procedure

Installation. Power on and initial setup. Before You Begin. Procedure Power on and initial setup, page 1 Customize ESXi host for remote access, page 4 Access and configure ESXi host, page 6 Deploy virtual machines, page 13 Install applications on virtual machines, page 14

More information

Cisco Unified Contact Center Enterprise Installation and Upgrade Guide, Release 11.5(1)

Cisco Unified Contact Center Enterprise Installation and Upgrade Guide, Release 11.5(1) Cisco Unified Contact Center Enterprise Installation and Upgrade Guide, Release 11.5(1) First Published: 2016-09-27 Last Modified: 2018-02-22 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive

More information

vrealize Suite Lifecycle Manager 1.0 Installation and Management vrealize Suite 2017

vrealize Suite Lifecycle Manager 1.0 Installation and Management vrealize Suite 2017 vrealize Suite Lifecycle Manager 1.0 Installation and Management vrealize Suite 2017 vrealize Suite Lifecycle Manager 1.0 Installation and Management You can find the most up-to-date technical documentation

More information

Installation of Cisco Business Edition 6000H/M

Installation of Cisco Business Edition 6000H/M Installation Overview, page 1 Installation Task Flow of Cisco Business Edition 6000H/M, page 2 Installation Overview This chapter describes the tasks that you must perform to install software on your Business

More information

OpenManage Integration for VMware vcenter Quick Installation Guide for vsphere Web Client Version 3.2

OpenManage Integration for VMware vcenter Quick Installation Guide for vsphere Web Client Version 3.2 OpenManage Integration for VMware vcenter Quick Installation Guide for vsphere Web Client Version 3.2 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better

More information

Cisco Prime Service Catalog Virtual Appliance Quick Start Guide 2

Cisco Prime Service Catalog Virtual Appliance Quick Start Guide 2 Cisco Prime Service Catalog 11.1.1 Virtual Appliance Quick Start Guide Cisco Prime Service Catalog 11.1.1 Virtual Appliance Quick Start Guide 2 Introduction 2 Before You Begin 2 Preparing the Virtual Appliance

More information

Cisco Interaction Manager (Unified WIM and Unified EIM)

Cisco Interaction Manager (Unified WIM and Unified EIM) Cisco Interaction Manager (Unified WIM and Unified EIM) Capabilities, page 1 Installation, page 3 Configuration, page 6 Capabilities About Cisco Interaction Manager Cisco Interaction Manager (CIM) is a

More information

Configuring High Availability for VMware vcenter in RMS All-In-One Setup

Configuring High Availability for VMware vcenter in RMS All-In-One Setup Configuring High Availability for VMware vcenter in RMS All-In-One Setup This chapter describes the process of configuring high availability for the VMware vcenter in an RMS All-In-One setup. It provides

More information

VMware AirWatch Database Migration Guide A sample procedure for migrating your AirWatch database

VMware AirWatch Database Migration Guide A sample procedure for migrating your AirWatch database VMware AirWatch Database Migration Guide A sample procedure for migrating your AirWatch database For multiple versions Have documentation feedback? Submit a Documentation Feedback support ticket using

More information

Installation Guide for Cisco Business Edition 6000S

Installation Guide for Cisco Business Edition 6000S First Published: November 16, 2015 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883

More information

Unified CCX Upgrade. Unified CCX Upgrade Types. This chapter explains how to upgrade Unified CCX.

Unified CCX Upgrade. Unified CCX Upgrade Types. This chapter explains how to upgrade Unified CCX. This chapter explains how to upgrade Unified CCX. Types, page 1 Important Considerations for Upgrade, page 3 Preupgrade Tasks, page 4 Scenarios, page 5 COP File, page 8 Upgrade Unified CCX Using Web Interface,

More information

MediaSense Installation

MediaSense Installation Install MediaSense, page 1 Initial Configuration, page 9 Upgrade MediaSense, page 15 Rollback Cluster, page 23 Install COP Files, page 24 Language Pack, page 25 Install MediaSense This section describes

More information

Unified CVP Migration

Unified CVP Migration If there is a change in platform of a later release of Unified CVP, migration from the existing release to the later release is required. For example, moving from Unified CVP 8.5(1) to Unified CVP 10.0(1)

More information

Configuring the SMA 500v Virtual Appliance

Configuring the SMA 500v Virtual Appliance Using the SMA 500v Virtual Appliance Configuring the SMA 500v Virtual Appliance Registering Your Appliance Using the 30-day Trial Version Upgrading Your Appliance Configuring the SMA 500v Virtual Appliance

More information

Installing and Configuring vcloud Connector

Installing and Configuring vcloud Connector Installing and Configuring vcloud Connector vcloud Connector 2.6.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new

More information

Installing the Cisco Virtual Network Management Center

Installing the Cisco Virtual Network Management Center CHAPTER 4 Installing the Cisco Virtual Network Management Center This chapter provides procedures for installing the Cisco Virtual Network Management Center (VNMC). This chapter includes the following

More information

Installing Cisco MSE in a VMware Virtual Machine

Installing Cisco MSE in a VMware Virtual Machine Installing Cisco MSE in a VMware Virtual Machine This chapter describes how to install and deploy a Cisco Mobility Services Engine (MSE) virtual appliance. Cisco MSE is a prebuilt software solution that

More information

OpenManage Integration for VMware vcenter Quick Installation Guide for vsphere Web Client Version 3.1

OpenManage Integration for VMware vcenter Quick Installation Guide for vsphere Web Client Version 3.1 OpenManage Integration for VMware vcenter Quick Installation Guide for vsphere Web Client Version 3.1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better

More information

Cisco VDS Service Broker Software Installation Guide for UCS Platforms

Cisco VDS Service Broker Software Installation Guide for UCS Platforms Cisco VDS Service Broker 1.0.1 Software Installation Guide for UCS Platforms Revised: May 2013 This document provides detailed instructions for installing the Cisco Videoscape Distribution Suite Service

More information

Integration of Customer Instance with Shared Management

Integration of Customer Instance with Shared Management Integration of Customer Instance with Shared Management Unified CCDM Integration, page 1 Cisco UCDM Integration, page 21 ASA Integration, page 24 Perimeta SBC Integration, page 34 Cisco Prime Collaboration

More information

Install ISE on a VMware Virtual Machine

Install ISE on a VMware Virtual Machine Supported VMware Versions, page 1 Support for VMware vmotion, page 1 Support for Open Virtualization Format, page 2 Virtual Machine Requirements, page 3 Virtual Machine Resource and Performance Checks,

More information

SRA Virtual Appliance Getting Started Guide

SRA Virtual Appliance Getting Started Guide SRA Virtual Appliance Getting Started Guide 1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your system. CAUTION: A CAUTION indicates potential

More information

OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3.1

OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3.1 OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3.1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use

More information

Cisco Unified Customer Voice Portal

Cisco Unified Customer Voice Portal This chapter explains the procedures you must perform to configure the Cisco Unified CVP Call and OAMP servers on Side A and Side B. Validate Network Card, page 2 Configure Unified CVP Call Server, page

More information

SonicWall Secure Mobile Access SMA 500v Virtual Appliance 8.6. Getting Started Guide

SonicWall Secure Mobile Access SMA 500v Virtual Appliance 8.6. Getting Started Guide SonicWall Secure Mobile Access SMA 500v Virtual Appliance 8.6 Getting Started Guide Copyright 2017 SonicWall Inc. All rights reserved. SonicWall is a trademark or registered trademark of SonicWall Inc.

More information

Install ISE on a VMware Virtual Machine

Install ISE on a VMware Virtual Machine Supported VMware Versions, page 1 Support for VMware vmotion, page 1 Support for Open Virtualization Format, page 2 Virtual Machine Requirements, page 2 Virtual Machine Resource and Performance Checks,

More information

Copyright SolarWinds. All rights reserved worldwide. No part of this document may be reproduced by any means nor modified, decompiled,

Copyright SolarWinds. All rights reserved worldwide. No part of this document may be reproduced by any means nor modified, decompiled, APM Migration Introduction... 3 General Requirements... 3 Database Requirements... 3 Stopping APM Services... 4 Creating and Restoring Orion Database Backups... 4 Creating a Database Backup File with Database

More information

Storage Manager 2018 R1. Installation Guide

Storage Manager 2018 R1. Installation Guide Storage Manager 2018 R1 Installation Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either

More information

Unified CCX Upgrade. Unified CCX Upgrade Types. This chapter explains how to upgrade Unified CCX.

Unified CCX Upgrade. Unified CCX Upgrade Types. This chapter explains how to upgrade Unified CCX. This chapter explains how to upgrade Unified CCX. Types, page 1 Important Considerations for Upgrade, page 2 Preupgrade Tasks, page 4 Scenarios, page 4 COP File, page 9 Upgrade Unified CCX Using Web Interface,

More information

Install ISE on a VMware Virtual Machine

Install ISE on a VMware Virtual Machine Supported VMware Versions, page 1 Support for VMware vmotion, page 1 Support for Open Virtualization Format, page 2 Virtual Machine Requirements, page 3 Virtual Machine Resource and Performance Checks,

More information

Database Administration

Database Administration Unified CCE, page 1 Historical Data, page 2 Tool, page 3 Database Sizing Estimator Tool, page 11 Administration & Data Server with Historical Data Server Setup, page 14 Database Size Monitoring, page 15

More information

Microsoft SQL Installation and Setup

Microsoft SQL Installation and Setup This chapter provides information about installing and setting up Microsoft SQL. Encrypted Database Not Supported, page 1 Install and Setup Microsoft SQL Server, page 1 Database Migration Required for

More information

Status Web Evaluator s Guide Software Pursuits, Inc.

Status Web Evaluator s Guide Software Pursuits, Inc. Status Web Evaluator s Guide 2018 Table of Contents Introduction... 2 System Requirements... 2 Contact Information... 2 Installing Microsoft IIS... 2 Verifying Microsoft IIS Features... 9 Installing the

More information

EMS MASTER CALENDAR Installation Guide

EMS MASTER CALENDAR Installation Guide EMS MASTER CALENDAR Installation Guide V44.1 Last Updated: May 2018 EMS Software emssoftware.com/help 800.440.3994 2018 EMS Software, LLC. All Rights Reserved. Table of Contents CHAPTER 1: Introduction

More information

Installing or Upgrading ANM Virtual Appliance

Installing or Upgrading ANM Virtual Appliance CHAPTER 2 This chapter describes how to deploy Cisco ANM Virtual Appliance 4.3 (new installation) and how to upgrade from ANM software version 4.1 or 4.2 to software version 4.3. This chapter includes

More information

NBC-IG Installation Guide. Version 7.2

NBC-IG Installation Guide. Version 7.2 Installation Guide Version 7.2 2017 Nuance Business Connect 7.2 Installation Guide Document Revision History Revision Date August 8, 2017 Revision List Updated supported SQL Server versions June 14, 2017

More information

Product Version 1.1 Document Version 1.0-A

Product Version 1.1 Document Version 1.0-A VidyoDashboard Installation Guide Product Version 1.1 Document Version 1.0-A Table of Contents 1. Overview... 3 About This Guide... 3 Prerequisites... 3... 5 Installing the OVA for VMware ESXi... 5 Configuring

More information

REVISED 1 AUGUST REVIEWER'S GUIDE FOR VMWARE APP VOLUMES VMware App Volumes and later

REVISED 1 AUGUST REVIEWER'S GUIDE FOR VMWARE APP VOLUMES VMware App Volumes and later REVISED 1 AUGUST 2018 REVIEWER'S GUIDE FOR VMWARE APP VOLUMES VMware App Volumes 2.13.1 and later Table of Contents Introduction Audience What You Will Learn Navigating This Document for App Volumes Use

More information

VMware Adapter for SAP Landscape Management Installation Configuration and Administration Guide for VI Administrators

VMware Adapter for SAP Landscape Management Installation Configuration and Administration Guide for VI Administrators VMware Adapter for SAP Landscape Management Installation Configuration and Administration Guide for VI Administrators Product version 1.4.1 running on vsphere 6.0 VMware Adapter for SAP Landscape Management

More information

Installing and Upgrading Cisco Network Registrar Virtual Appliance

Installing and Upgrading Cisco Network Registrar Virtual Appliance CHAPTER 3 Installing and Upgrading Cisco Network Registrar Virtual Appliance The Cisco Network Registrar virtual appliance includes all the functionality available in a version of Cisco Network Registrar

More information

REVISED 1 AUGUST QUICK-START TUTORIAL FOR VMWARE APP VOLUMES VMware App Volumes and later

REVISED 1 AUGUST QUICK-START TUTORIAL FOR VMWARE APP VOLUMES VMware App Volumes and later REVISED 1 AUGUST 2018 QUICK-START TUTORIAL FOR VMWARE APP VOLUMES VMware App Volumes 2.13.1 and later Table of Contents Introduction Audience What You Will Learn Navigating This Document for App Volumes

More information

Installing the Operating System or Hypervisor

Installing the Operating System or Hypervisor If you purchased E-Series Server or NCE Option 1 (E-Series Server or NCE without a preinstalled operating system or hypervisor), you must install an operating system or hypervisor. This chapter includes

More information

Installing Cisco CMX in a VMware Virtual Machine

Installing Cisco CMX in a VMware Virtual Machine Installing Cisco CMX in a VMware Virtual Machine This chapter describes how to install and deploy a Cisco Mobility Services Engine (CMX) virtual appliance. Cisco CMX is a prebuilt software solution that

More information

Database Administration

Database Administration Unified CCE, on page 1 Historical Data, on page 2 Database Statistics, on page 3 Tool, on page 3 Database Sizing Estimator Tool, on page 11 Administration & Data Server with Historical Data Server Setup,

More information

System Administration

System Administration Most of SocialMiner system administration is performed using the panel. This section describes the parts of the panel as well as other administrative procedures including backup and restore, managing certificates,

More information

Install ISE on a VMware Virtual Machine

Install ISE on a VMware Virtual Machine ISE Features Not Supported in a Virtual Machine, page 1 Supported VMware Versions, page 1 Support for VMware vmotion, page 2 Support for Open Virtualization Format, page 2 Virtual Machine Requirements,

More information

Configuring Administrative Operations

Configuring Administrative Operations Configuring Administrative Operations This section includes the following topics: Administrative Operation Conventions, page 1 Configuring Backup Operations, page 1 Restoring a Backup Configuration, page

More information

Firmware Management. Overview of Firmware. This chapter includes the following sections:

Firmware Management. Overview of Firmware. This chapter includes the following sections: This chapter includes the following sections: Overview of Firmware, page 1 Options for Upgrading Firmware, page 2 Obtaining Software from Cisco Systems, page 2 Installing CIMC Firmware from a Remote Server,

More information

vrealize Suite Lifecycle Manager 1.1 Installation, Upgrade, and Management vrealize Suite 2017

vrealize Suite Lifecycle Manager 1.1 Installation, Upgrade, and Management vrealize Suite 2017 vrealize Suite Lifecycle Manager 1.1 Installation, Upgrade, and Management vrealize Suite 2017 You can find the most up-to-date technical documentation on the VMware website at: https://docs.vmware.com/

More information

Deploying Cisco UCS Central

Deploying Cisco UCS Central This chapter includes the following sections: Obtaining the Cisco UCS Central Software from Cisco, page 1 Using the Cisco UCS Central OVA File, page 2 Using the Cisco UCS Central ISO File, page 4 Logging

More information

LiveNX Upgrade Guide from v5.2.0 to v5.2.1

LiveNX Upgrade Guide from v5.2.0 to v5.2.1 LIVEACTION, INC. LiveNX Upgrade Guide from v5.2.0 to v5.2.1 UPGRADE LiveAction, Inc. 3500 Copyright WEST BAYSHORE 2016 LiveAction, ROAD Inc. All rights reserved. LiveAction, LiveNX, LiveUX, the LiveAction

More information

Configuring Administrative Operations

Configuring Administrative Operations This section includes the following topics: Administrative Operation Conventions, page 1 Managing Backup Operations, page 1 Restoring a Backup Configuration, page 6 Managing Export Operations, page 10

More information

Installing the PC-Kits SQL Database

Installing the PC-Kits SQL Database 1 Installing the PC-Kits SQL Database The Network edition of VHI PC-Kits uses a SQL database. Microsoft SQL is a database engine that allows multiple users to connect to the same database. This document

More information

Managing the Capability Catalog in Cisco UCS Manager

Managing the Capability Catalog in Cisco UCS Manager Managing the Capability Catalog in Cisco UCS Manager This chapter includes the following sections: Capability Catalog, page 1 Activating a Capability Catalog Update, page 3 Verifying that the Capability

More information

Dell Storage Compellent Integration Tools for VMware

Dell Storage Compellent Integration Tools for VMware Dell Storage Compellent Integration Tools for VMware Version 4.0 Administrator s Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your

More information

Installing and Configuring vcloud Connector

Installing and Configuring vcloud Connector Installing and Configuring vcloud Connector vcloud Connector 2.5.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new

More information

Upgrading the System

Upgrading the System Preparing to Upgrade a Data Center, page 1 Automatically, page 3 Manually, page 6 Preparing to Upgrade a Data Center Your system can be upgraded by redeploying it with an upgraded OVA (Virtual Server Template)

More information

Cisco Business Edition 6000 Installation Guide, Release 10.0(1)

Cisco Business Edition 6000 Installation Guide, Release 10.0(1) First Published: January 15, 2014 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883

More information

System Architecture and Reporting

System Architecture and Reporting Unified ICM software distributes incoming telephone calls and web-initiated requests to skill-appropriate, available agents across multiple contact centers. It does this by tracking activity on all monitored

More information

CTI OS Silent Monitor Installation and Configuration

CTI OS Silent Monitor Installation and Configuration CTI OS Silent Monitor Installation and Configuration Silent Monitor Service Installation and Configuration, page 1 Silent Monitor Service Installation and Configuration This section provides an overview

More information

VMware Adapter for SAP Landscape Management Installation Configuration and Administration Guide for VI Administrators

VMware Adapter for SAP Landscape Management Installation Configuration and Administration Guide for VI Administrators VMware Adapter for SAP Landscape Management Installation Configuration and Administration Guide for VI Administrators Product version 1.4.1 running on vsphere 5.5 VMware Adapter for SAP Landscape Management

More information

Setting Up the Server

Setting Up the Server Managing Licenses, page 1 Cross-launch from Prime Collaboration Provisioning, page 5 Integrating Prime Collaboration Servers, page 6 Single Sign-On for Prime Collaboration, page 7 Changing the SSL Port,

More information

Installing Your System Using Manual Deployment

Installing Your System Using Manual Deployment Installing Your System Using Manual Deployment General Concepts For Your System Deployment, page 1 Installation Checklist, page 2 Required Information For a Manual Deployment, page 3 Deploying the OVA

More information

AppController :21:56 UTC Citrix Systems, Inc. All rights reserved. Terms of Use Trademarks Privacy Statement

AppController :21:56 UTC Citrix Systems, Inc. All rights reserved. Terms of Use Trademarks Privacy Statement AppController 2.6 2014-03-18 13:21:56 UTC 2014 Citrix Systems, Inc. All rights reserved. Terms of Use Trademarks Privacy Statement Contents AppController 2.6... 6 About This Release... 8 Getting Started...

More information

Dell Storage Integration Tools for VMware

Dell Storage Integration Tools for VMware Dell Storage Integration Tools for VMware Version 4.1 Administrator s Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION:

More information

Windows Server 2003 { Domain Controller Installation and Configuration}

Windows Server 2003 { Domain Controller Installation and Configuration} Windows Server 2003 { Domain Controller Installation and } Benedikt Riedel MCSE + Messaging www.go-unified.com www.siemens.com/open Benedikt.riedel@siemens.com Start up the prepared Windows Server 2003

More information

How to Deploy vcenter on the HX Data Platform

How to Deploy vcenter on the HX Data Platform First Published: 2016-07-11 Last Modified: 2019-01-08 vcenter on HyperFlex Cisco HX Data Platform deployment, including installation and cluster configuration and management, requires a vcenter server

More information

UC for Enterprise (UCE) NEC Centralized Authentication Service (NEC CAS)

UC for Enterprise (UCE) NEC Centralized Authentication Service (NEC CAS) UC for Enterprise (UCE) NEC Centralized Authentication Service (NEC CAS) Installation Guide NEC NEC Corporation October 2010 NDA-30362, Revision 15 Liability Disclaimer NEC Corporation reserves the right

More information

LiveNX Upgrade Guide from v5.1.2 to v Windows

LiveNX Upgrade Guide from v5.1.2 to v Windows LIVEACTION, INC. LiveNX Upgrade Guide from v5.1.2 to v5.1.3 - Windows UPGRADE LiveAction, Inc. 3500 Copyright WEST BAYSHORE 2016 LiveAction, ROAD Inc. All rights reserved. LiveAction, LiveNX, LiveUX, the

More information

Accops HyWorks v3.0. Installation Guide

Accops HyWorks v3.0. Installation Guide Accops HyWorks v3.0 Installation Guide Last Update: 4/25/2017 2017 Accops Technologies Pvt. Ltd. All rights reserved. The information contained in this document represents the current view of Propalms

More information

SAS Activity-Based Management Server Software 6.1 for Windows

SAS Activity-Based Management Server Software 6.1 for Windows Installation Instructions SAS Activity-Based Management Server Software 6.1 for Windows Pre-installation Checklist Before you start to install or upgrade SAS Activity-Based Management Server, please follow

More information

Reliable High-Speed Connection to Publication Database for Synchronization

Reliable High-Speed Connection to Publication Database for Synchronization PCS Axis v1.9 Client/Server New Installation with Replication May 2015 Introduction American Innovations (AI) is pleased to announce version 1.9 of our Pipeline Compliance System Axis software (PCS Axis

More information

INSTALL GUIDE BIOVIA INSIGHT 2016

INSTALL GUIDE BIOVIA INSIGHT 2016 INSTALL GUIDE BIOVIA INSIGHT 2016 Copyright Notice 2015 Dassault Systèmes. All rights reserved. 3DEXPERIENCE, the Compass icon and the 3DS logo, CATIA, SOLIDWORKS, ENOVIA, DELMIA, SIMULIA, GEOVIA, EXALEAD,

More information

Adding a High Availability System

Adding a High Availability System Adding a HA System Using Automatic Deployment, page 1 Adding a HA System Using Manual Deployment, page 3 Confirming Your Primary System and Your HA System Are at the Same Version, page 5, page 6 Testing

More information

OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3

OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3 OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of

More information

Migrating vrealize Automation 6.2 to 7.1

Migrating vrealize Automation 6.2 to 7.1 Migrating vrealize Automation 6.2 to 7.1 vrealize Automation 7.1 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new edition.

More information

SolidWorks Enterprise PDM Installation Guide

SolidWorks Enterprise PDM Installation Guide SolidWorks Enterprise PDM Installation Guide Contents Legal Notices...vi 1 SolidWorks Enterprise PDM Installation Guide...7 2 Installation Overview...8 Required Installation Components...8 Optional Installation

More information

Upgrading Your System

Upgrading Your System Supported Upgrade Paths, on page 1 Before You Begin an Upgrade, on page 3 Automatically, on page 4 Manually, on page 6 Supported Upgrade Paths This release of Cisco WebEx Meetings Server supports upgrades

More information

akkadian Provisioning Manager Express

akkadian Provisioning Manager Express akkadian Provisioning Manager Express Version 4.11.04 Release Notes September 14 th, 2017 Copyright and Trademarks: I. Copyright: This website and its content is copyright 2017 Akkadian Labs, LLC. All

More information

QUICK START GUIDE Cisco Virtual Network Management Center 2.0 Quick Start Guide

QUICK START GUIDE Cisco Virtual Network Management Center 2.0 Quick Start Guide QUICK START GUIDE Cisco Virtual Network Management Center 2.0 Quick Start Guide 1 Preface 2 Installation Prerequisites 3 Installing VNMC 4 Configuring VNMC 5 Troubleshooting VNMC Installation and Configuration

More information

Install ISE on a VMware Virtual Machine

Install ISE on a VMware Virtual Machine ISE Features Not Supported in a Virtual Machine, page 1 Supported VMware Versions, page 1 Support for VMware vmotion, page 2 Support for Open Virtualization Format, page 2 Virtual Machine Requirements,

More information

Storage Center. Enterprise Manager 5.5. Installation and Setup Guide

Storage Center. Enterprise Manager 5.5. Installation and Setup Guide Storage Center Enterprise Manager 5.5 Installation and Setup Guide Enterprise Manager 5.5 Installation and Setup Guide 680-028-010 Revision Date Description A March 2011 Initial release. B April 2011 Updated

More information

Installing Cisco WebEx Social

Installing Cisco WebEx Social CHAPTER 2 This chapter describes how to install Cisco WebEx Social. This chapter includes these topics: Before You Begin, page 2-1 3.1, page 2-1 Before You Begin Before you begin installation, review the

More information