Solare Datentechnik SUNNY DESIGN

Transcription

1 Solare Datentechnik SUNNY DESIGN User Manual SDesign-BEN Version 1.5 EN

2 Table of Contents Table of Contents 1 Notes on this Manual Target Group Validity Symbols Used Sunny Design Application and Function What's New? Scope of Delivery Accessories Identification Installation System Requirements Operation PV system Location Modules Tilt Angle Azimuth Inverter Select Inverters System Configuration PV/Inverter Check List Multi-String Inverter Cabling Result PV Generator Inverter Compatibility Check User Manual SDesign-BEN

3 Table of Contents Estimated System Performance Preview Layout Print Contact SDesign-BEN User Manual

4 Notes on this Manual 1 Notes on this Manual 1.1 Target Group This documentation is intended for installers and end users. It contains instructions on installing and operating the Sunny Design system design software. 1.2 Validity This Sunny Design user manual applies from Version 1.4. You can call up the program version as described in section 2.5 "Identification" (Page 6). 1.3 Symbols Used This symbol indicates a notice which, if ignored, will make the procedure or operation more difficult. User Manual SDesign-BEN

5 Sunny Design 2 Sunny Design 2.1 Application and Function Sunny Design makes the set-up of PV systems of all capacities as easy as possible in just three steps. 1. PV generator definition Entry of location, module type, generator alignment as well as PV system output/number of modules. 2. Inverter type specification Data entry wizard to aid choice of specific features or the immediate start of the inverter. 3. Evaluation Automatic configuration testing, establishing performance features over an operating year. The results can be printed as a report, the content and form of which can be edited to a great extent. Features: Inverter database with every SMA inverter (Sunny Boy, Sunny Mini Central, Sunny Central). PV module database of currently popular PV modules Location database with high-resolution actual radiation and meteorological data (no statistical data). System support via: - (Multi-)String inverter - central inverter Support of PV generators with: - any tilt angle - any azimuth angle - single-axis tracking Testing operating data and preparation of results as a system check list and graph. Energy analysis over an operating year. Cable dimensioning support. Freely designable result report. 5 SDesign-BEN User Manual

6 Sunny Design 2.2 What's New? The selection list of the inverter types is generated according to country. Only the inverters that are approved for the country in which the system is located are listed. This function can also be switched off. The location display for the printout of results can be changed as defined by the user. The Chinese language feature has been added to Sunny Design. 2.3 Scope of Delivery Sunny Design can be downloaded from the SMA web server or ordered as a CD. 2.4 Accessories A range of weather databases are available for download on the SMA web server. They can be installed retrospectively to check the design of PV systems for other countries. 2.5 Identification The window shown at right can be opened using the [Help] menu and the [Info] menu item. The following information can be seen in the three windows: 1. Program information Program version and supporting institutes 2. Database information Type and version of the modules installed, e. g. inverter, weather data etc. 3. Location data List of the locations/regions of all installed weather databases currently available on the PC User Manual SDesign-BEN

7 Installation 3 Installation To install Sunny Design, start the setup file and follow the instructions on the screen. You can install additional weather databases retrospectively. The SMA web site in the internet contains additional weather databases and updates. To do so, click [Database] > [Retrieve download page] after installation. 3.1 System Requirements Sunny Design requires the following for installation. Supported Operating Systems Windows 98SE Windows ME Windows NT 4.0 (Service Pack 6.0a) Windows 2000 Windows XP Minimum Processor Speed and Resources Pentium III 800 Mhz or comparable processor 128 MB RAM 250 MB free hard disk space 1024 x 768 pixels resolution with 256 colors Internet Explorer SDesign-BEN User Manual

8 Operation 4 Operation The welcome screen is displayed after you start Sunny Design. You can either: open a saved project; older Sunny Design projects, from version 1.02 on, can also be opened, start a new project, or close the program. The Program Interface Menu bar 2. Program pages 3. Pull-down window 4. Window 5. Overview / Help User Manual SDesign-BEN

9 Operation 4.1 PV system This page contains data specifications for the PV generator. The location, module type and number of modules are minimum required entries Location Please enter the location of the PV system. Sunny Design calculates all other values based on the location and the weather data. PV Module Temperatures This allows you to make detailed entries on the module temperature. Sunny Design suggests values based on the weather data Modules Select the manufacturer and module type to be used in this project. In generator size, you can enter either the number of PV modules or the required peak output. Modules entered manually are identified with *User* as an ending after the manufacturer's name. Modules entered manually and modules provided by SMA which have the same names in the database after an update are identified with * as the ending. New Module You can enter modules which are not in the Sunny Design database manually. To do so, click <New module> and enter all required technical specifications of the module. Sunny Design requires all values marked with * to work with the modules. If you do not have all values required, please contact the manufacturer of the module. Edit Module This button is only displayed when you select a module you created yourself. You can change the module data or delete the module on the page which opens Tilt Angle The Sunny Design sets the ideal tilt angle automatically after you select the location. If the actual angle is different, click the checkbox before <optimized> to remove the tick. You can then set the tilt angle manually. 9 SDesign-BEN User Manual

10 Operation Azimuth The Sunny Design sets the ideal azimuth automatically after you select the location. If the actual angle is different, you can set the azimuth manually. If the PV modules track the sun, click the checkbox before <Tracking>, so that a tick is displayed there. 4.2 Inverter This page allows you to select the inverter for the PV generator set and enter details on wiring Select Inverters Select an inverter from the list. The selection list of the inverters is country-specific. Only the inverters that are approved for the country in which the system is located are listed. You can restrict the list of inverters displayed by including or excluding certain types of inverters using the <Category selection> button. If you place a checkmark in front of <Ignore country selection> inverters that are not approved for the country in which the system is located are also listed. Sunny Design rounds the number of modules to a range compatible for the inverter. This is not necessarily the best solution System Configuration This shows the current system configuration. This allows you to increase the number of inverters and change the grid voltage. User Manual SDesign-BEN

11 Operation PV/Inverter Check List The Sunny Design software indicates via a colored bar whether the combination is permitted in accordance with the PV generator and inverter selected. Green The system is designed well. The combination is permitted. Yellow The inverter is too large for the PV generator, or vice versa. This can cause yield losses. The combination is permitted. Red The PV generator or inverter exceeds critical limit values. Sunny Design marks the values on the check list with four different symbols. Green the value is OK. Blue the value was adjusted by Sunny Design. Yellow the value is too low or too high, yield will be lost. Red the value endangers the inverter or the PV generator. Switch from the system overview (top right) to the Help view for specific solutions for the warnings Multi-String Inverter If you have selected a Multi-String inverter, you can configure the strings individually. You can also set different PV generators and the alignment for individual strings separately on the Multi-String entry page Cabling If the <Automatically recalculate> checkbox is activated, Sunny Design automatically suggests the cable length and the cable cross-section. If this is the case, manual entries are overwritten. The checkbox is deactivated automatically if entries are made manually and the changes are retained. 11 SDesign-BEN User Manual

12 Operation Change the cable length and cross-section such that losses and the cable resistance are minimized and not within the critical range. Please note the VDE instructions for cable properties. 4.3 Result Yield calculations are estimates based on mathematical models. The real energy yield will differ from these calculations. This page shows a summary of all settings made to date. You can also create individual result reports using the <Preview>, <Layout> and <Print> buttons PV Generator This shows the details on the PV generator Inverter This shows the details on the inverter Compatibility Check If the compatibility check displays a yellow curve, return to the inverter page and correct the corresponding data if necessary. See section "PV/Inverter Check List" (Page 11) Estimated System Performance This provides an overview of the estimated system performance. User Manual SDesign-BEN

13 Operation Preview This provides a print preview of the current layout settings Layout This allows you to compile or edit information for the printout. All texts which are clearly visible in this window fit on the printout. You can also save the result and the check list as a pdf Print Click this button to print the results page. 13 SDesign-BEN User Manual

14 Contact 5 Contact If you have any questions or queries, please contact us. A large team of qualified engineers and technicians is available during business hours. Help us to help you by having the following information ready when you call us: Sunny Design version Database version Project file in which the problem arises Sonnenallee Niestetal Germany Tel Fax serviceline@sma.de User Manual SDesign-BEN

15 Legal Restrictions The information contained in this document is the property of. Publishing its content, either partially or in full, requires the written permision of. Any internal company copying of the document for the purposes of evaluating the product or its correct implementation is allowed and does not require permission. Exclusion of liability The general terms and conditions of delivery of shall apply. The content of these documents is continually checked and amended, where necessary. However, discrepancies cannot be excluded. No guarantee is made for the completeness of these documents. The latest version is available on the Internet at or from the usual sales channels. Guarantee or liability claims for damages of any kind are exlcuded if they are caused by one or more of the following: Improper or inappropriate use of the product Operating the product in an unintended environment Operating the product whilst ignoring relevant, statutory safety regulations in the deployment location Ignoring safety warnings and instructions contained in all documents relevant to the product Operating the product under incorrect safety or protection conditions Altering the product or supplied software without authority The product malfunctions due to operating attached or neighboring devices beyond statutory limit values In case of unforeseen calamity or force majeure Software licensing The use of supplied software produced by is subject to the following conditions: This software may be copied for internal company purposes and may be installed on any number of computers. Supplied source codes may be changed or adapted for internal company purposes on your own responsibility. Drivers may also be transferred to other operating systems. Source codes may only be published with the written permission of SMA Solar Technology AG. Sub-licensing of software is not permissible. Limitation of liability: rejects any liability for direct or indirect damages arising from the use of software developed by. This also applies to the provision or non-provision of support activities. Supplied software not developed by is subject to the respective licensing and liability agreements of the manufacturer. Trademarks All trademarks are recognized even if these are not marked separately. Missing designations do not mean that a product or brand is not a registered trademark. Sonnenallee Niestetal Germany Tel Fax info@sma.de All rights reserved. User Manual SDesign-BEN

16 Terms of Use With the installation of the software tool "Sunny Design" you express your approval of the following terms of use. Copyright "Sunny Design" software has been developed by and is copyright protected. It is provided to the user free of charge and for an unlimited period. PASSING ON "Sunny Design" is freeware and may be freely copied and used; it may be passed on to third parties only completely and unchanged while maintaining all proprietary rights. The commercial passing on to third parties (e.g. as part of shareware/freeware distributions) is not permitted. The user is not allowed to change in any way the original code and the original data. SMA reserves the right to improve and/ or modify the product described. The currently valid version can be downloaded from the internet at or retrieved via the usual sales channels. Inverter Data The employed technical data of the SMA inverter is continuously checked and, if necessary, adapted. Nevertheless, deviations and errors cannot be excluded. We accept no responsibility for the completeness and/or correctness of the data (The data does not represent guaranteed characteristics). PV Module Data The employed technical data of the PV modules is based on the publicly accessible information of the respective manufacturers. SMA has integrated the available data into the software with the greatest care possible. The contents of this software are continuously checked and, if necessary, adapted. Nevertheless, deviations cannot be excluded. We cannot accept responsibility that the data is up-to-date, correct and complete as it is subject to frequent modifications. Insoation Data These data have been given to SMA from several institutions and allowed to be used in this program. Therefore, SMA does not take any liability for completeness and/or correctness of these data. Warranty and Liability The software is made available to the user free of charge, thus SMA cannot accept responsibility for its proper operation, for its suitability for certain purposes and for the non-violation of any rights of third parties. The software is used at the user's risk and responsibility. SMA is only liable in case of wrongful intent and gross negligence. In particular, SMA does not accept further liability for defects and consequential damage, for incorrect profit calculations or for loss of profits, loss of use, damage to used hardware, for loss of data, interruption of operation or other damage. Contact Information Please direct any questions or feedback to: Sunny Design Sonnenallee Niestetal Germany SunnyDesign@SMA.de All rights reserved User Manual SDesign-BEN

17 Sonnenallee Niestetal, Germany Tel.: Fax: Vertrieb@SMA.de Freecall: 0800 SUNNYBOY Freecall: