TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite Installation. Software Release 1.1 January 2011

Transcription

1 TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite Installation Software Release 1.1 January 2011

2 Important Information SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (OR PROVIDE LIMITED ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDED OR BUNDLED SOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCO SOFTWARE OR FOR ANY OTHER PURPOSE. USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONS OF A LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSE AGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USER LICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THE SOFTWARE (AND WHICH IS DUPLICATED IN THE LICENSE FILE) OR IF THERE IS NO SUCH SOFTWARE LICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATED IN THE LICENSE FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMS AND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND AN AGREEMENT TO BE BOUND BY THE SAME. This document contains confidential information that is subject to U.S. and international copyright laws and treaties. No part of this document may be reproduced in any form without the written authorization of TIBCO Software Inc. TIBCO, The Power of Now, TIBCO ActiveMatrix BusinessWorks, TIBCO Designer, and TIBCO Runtime Agent are either registered trademarks or trademarks of TIBCO Software Inc. in the United States and/or other countries. All other product and company names and marks mentioned in this document are the property of their respective owners and are mentioned for identification purposes only. THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALL OPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THE SAME TIME. SEE THE README FILE FOR THE AVAILABILITY OF THIS SOFTWARE VERSION ON A SPECIFIC OPERATING SYSTEM PLATFORM. THIS DOCUMENT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENT AT ANY TIME. THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/OR QUALIFIED, DIRECTLY OR INDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDING BUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES. Copyright TIBCO Software Inc. ALL RIGHTS RESERVED. TIBCO Software Inc. Confidential Information

3 iii Contents Figures v Tables vii Preface ix Related Documentation x Documentation x Other TIBCO Product Documentation x Third-Party Documentation x Typographical Conventions xi How to Contact TIBCO Support xiii Chapter 1 Introduction Installation Overview Installation Modes Installation Types Installation Registry Installation History Installation Requirements Disk Space Requirements Software Requirements Supported Platforms Installer Account Installing from Network Drive Chapter 2 Installing and Uninstalling TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite Installation Installing In GUI Mode Installing In Console Mode Installing In Silent Mode Uninstallation Uninstalling In GUI Mode Uninstalling In Console Mode Uninstalling In Silent Mode Installation

4 iv Contents Index Installation

5 Figures v Figures Figure 1 Select the TIBCO ActiveMatrix BusinessWorks Version Figure 2 Select the Installation Type Figure 3 Package Selection Installation

6 vi Figures Installation

7 Tables vii Tables Table 1 General Typographical Conventions xi Table 2 Required and Optional TIBCO Products Table 3 Supported Platforms, Package Names, Hardware Platforms, and Disk Space Installation

8 viii Tables Installation

9 ix Preface This software may be available on multiple operating systems. However, not all operating system platforms for a specific software version are released at the same time. Please see the readme file for the availability of this software version on a specific operating system platform. This document describes how to install TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite. Topics Related Documentation, page x Typographical Conventions, page xi How to Contact TIBCO Support, page xiii Installation

10 x Related Documentation Related Documentation This section lists documentation resources you may find useful. Documentation The following documents form the TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite documentation set: Installation Read this manual for instructions on how to install the plug-in on Microsoft Windows and UNIX systems. User s Guide Read this manual for the concepts relating to the plug-in, the applications with which the plug-in interacts, configuration and deployment information, and examples. Release Notes Read the release notes for a list of new and changed features. This document also contains lists of known issues and closed issues for this release. Other TIBCO Product Documentation You may find it useful to read the documentation for the following TIBCO products: TIBCO Designer TIBCO Administrator TIBCO Runtime Agent TIBCO ActiveMatrix BusinessWorks TIBCO ActiveMatrix BusinessWorks Service Engine TIBCO ActiveMatrix Service Grid TIBCO Business Studio Third-Party Documentation You may also find it useful to read the Oracle E-Business Suite Documentation Library which is available from the Oracle Technical Network at Installation

11 Preface xi Typographical Conventions The following typographical conventions are used in this manual. Table 1 General Typographical Conventions Convention TIBCO_HOME ENV_HOME ORACLE_HOME USER_HOME code font bold code font italic font Use Many TIBCO products must be installed within the same home directory. This directory is referenced in the documentation as TIBCO_HOME. The value of TIBCO_HOME depends on the operating system. For example, on Windows systems, the default value is C:\tibco. Other TIBCO products are installed into an installation environment. Incompatible products and multiple instances of the same product are installed into different installation environments. The directory into which such products are installed is referenced in documentation as ENV_HOME. The value of ENV_HOME depends on the operating system. For example, on Windows systems the default value is C:\tibco. Oracle E-Business Suite database server installs into a directory. This directory is referenced in documentation as ORACLE_HOME. The default value of ORACLE_HOME depends on the operating system. The user s home directory on the operating system is referenced in documentation as USER_HOME. Code font identifies commands, code examples, filenames, pathnames, and output displayed in a command window. For example: Use MyCommand to start the foo process. Bold code font is used in the following ways: In procedures, to indicate what a user types. For example: Type admin. In large code samples, to indicate the parts of the sample that are of particular interest. In command syntax, to indicate the default parameter for a command. For example, if no parameter is specified, MyCommand is enabled: MyCommand [enable disable] Italic font is used in the following ways: To indicate a document title. For example: See TIBCO ActiveMatrix BusinessWorks Concepts. To introduce new terms For example: A portal page may contain several portlets. Portlets are mini-applications that run in a portal. To indicate a variable in a command or code syntax that you must replace. For example: MyCommand PathName Installation

12 xii Typographical Conventions Table 1 General Typographical Conventions (Cont d) Convention Key combinations Use Key name separated by a plus sign indicate keys pressed simultaneously. For example: Ctrl+C. Key names separated by a comma and space indicate keys pressed one after the other. For example: Esc, Ctrl+Q. The note icon indicates information that is of special interest or importance, for example, an additional action required only in certain circumstances. The tip icon indicates an idea that could be useful, for example, a way to apply the information provided in the current section to achieve a specific result. The warning icon indicates the potential for a damaging situation, for example, data loss or corruption if certain steps are taken or not taken. Installation

13 Preface xiii How to Contact TIBCO Support For comments or problems with this manual or the software it addresses, please contact TIBCO Support as follows: For an overview of TIBCO Support, and information about getting started with TIBCO Support, visit this site: If you already have a valid maintenance or support contract, visit this site: Entry to this site requires a user name and password. If you do not have a user name, you can request one. Installation

14 xiv How to Contact TIBCO Support Installation

15 1 Chapter 1 Introduction This chapter explains how to install TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite. Topics Installation Overview, page 2 Installation Requirements, page 4

16 2 Chapter 1 Introduction Installation Overview This section provides an overview of the installer, the installation registry, and the additional software required before you install TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite. Installation Modes The installer can run in different modes. Each mode is supported on all platforms. GUI Mode In GUI mode, the installer presents panels that allow you to make choices about product selection, product location, and so on. To invoke the installer in GUI mode, double-click the executable. Console Mode Console mode allows you to run the installer from the command prompt or terminal window. This is useful for machines that have no Microsoft Windows environment. Silent Mode Silent mode either installs using default settings or uses a response file that was saved during an earlier installation. Silent mode installs without prompting you for information. If no response file has been recorded earlier and you invoke the installer with the -silent argument, the default installation parameters are used. If a response file exists and the installer is started with -options responsefilename as an argument, the installer uses the values specified by the user when the response file was generated. Installation Types Two installation types are available: Typical and Custom. The Typical installation type installs all the products in the package on the specified platform. The Custom installation type allows you to select products and components.

17 Installation Overview 3 Installation Registry The installer maintains an installation registry. The registry location depends on the platform. This section explains where the registry files are located. The files have vpd as a prefix, which stands for Vital Product Database. Do not edit, modify, rename, move, or remove any of the registry vpd files. Microsoft Windows Platforms TIBCO products maintain the installation registry in the SystemDrive:\windows folder. The following files represent the installation registry: SystemDrive:\windows\vpd.properties SystemDrive:\windows\vpd.properties.tibco.systemName UNIX Platforms The installation registry is maintained in the following files in the user's home directory: USER_HOME/vpd.properties USER_HOME/vpd.properties.tibco.systemName Installation History The installer and uninstaller create a file named TIBCOInstallationHistory.xml in the same location where the installation registry is created. Each time an installation or uninstallation is performed, entries are appended to the file. On Microsoft Windows: SystemDrive:\Windows\TIBCOInstallationHistory.xml On UNIX: Users_Home/TIBCOInstallationHistory.xml The file TIBCOInstallationHistory.xml contains the record of all installation and uninstallation activities of all products, features and components. Do not edit, modify, rename, move, or remove the TIBCOInstallationHistory.xml file.

18 4 Chapter 1 Introduction Installation Requirements This section describes the disk space requirements, software requirements, and supported platforms for the TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite. Disk Space Requirements The installer calculates the disk space required in the product home location for the selected components before the actual installation (the copying of files to the system) begins. The installer will proceed only if sufficient free disk space is available in the product home location. If the disk space required is consumed by another process while the installer is copying the files, the available disk space can be reduced. In this case, the installer may fail and give a failure message. While performing installation, it is recommended to end other processes that consume disk space in the product home location. Microsoft Windows Platforms Installer disk space requirements in temporary area The entire package is extracted into a temporary folder, typically SystemDrive:\Temp or SystemDrive:\Documents and Settings\USER_NAME\Local Settings\Temp. The installer requires 45MB of free space in the temp directory. UNIX Platforms Installer disk space requirements in temporary area The installer launcher first extracts a Java Virtual Machine (JVM) in a temporary directory and uses this JVM to launch itself. The size of the extracted JVM differs from platform to platform. On the supported UNIX platforms, 20 MB of free disk space in /var/tmp is required. If your system does not have sufficient free disk space in the above temporary area, you can still run the installer with a different temporary area by using the following option when starting the installer: install_package_name.bin -is:tempdir /new_tmp

19 Installation Requirements 5 where /new_tmp has sufficient free disk space. Disk space requirement in user's home directory On UNIX platforms, when a regular (non-root) user installs a TIBCO product, the installation registry (two vpd files) is maintained in the user's home directory. As more products are installed, entries are added into these vpd files. The user's home directory must have at least 500 KB of free disk space. Software Requirements Before starting the installation procedure, review the topics in this section to determine that your system meets the basic requirements and that you have the prerequisite software installed. TIBCO Software Requirements TIBCO Runtime Agent and additional TIBCO products you may be installing are listed in Table 2. For the supported versions of the listed products, refer to the readme file for TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite. Table 2 Required and Optional TIBCO Products Product TIBCO Runtime Agent Purpose (Required by the plug-in) TIBCO Runtime Agent includes TIBCO Designer along with a number of TIBCO and third-party libraries used by the plug-in and other TIBCO products. You must install TIBCO Runtime Agent before you install TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite.

20 6 Chapter 1 Introduction Table 2 Required and Optional TIBCO Products (Cont d) Product (Cont d) TIBCO Administrator TIBCO ActiveMatrix BusinessWorks Purpose (Cont d) (Required for deployment) TIBCO Administrator includes the following modules: -- User Management. Management of authentication, roles and users, that is, connecting roles (groups) and users to access control lists (ACLs). This includes security for server-based projects at design time and for deployed applications at runtime. -- Resource Management. Monitoring of machines and of all running applications in a TIBCO administration domain. Alerts can be created, for example, to notify an administrator if the number of processes or disk usage exceeds a certain number. -- Application Management. Uploading of Enterprise Archive (EAR) files, creation, configuration, deployment, and monitoring of applications. This console is also used to start and stop applications. TIBCO Administrator is available as a separate installation and can be installed after installing TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite. (Required) TIBCO ActiveMatrix BusinessWorks is a scalable, extensible, and easy to use integration platform that allows you to develop integration projects. TIBCO ActiveMatrix BusinessWorks must be installed before installing TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite. To run the plug-in with BusinessWorks Service Engine, the following products must be installed before installing : (See the readme file for for the supported versions.) TIBCO ActiveMatrix Service Grid TIBCO ActiveMatrix BusinessWorks Service Engine TIBCO Designer Add-in for TIBCO Business Studio TIBCO ActiveMatrix Service Grid is a scalable and extensible platform for developing, deploying, and managing applications that conform to a service-oriented architecture. TIBCO ActiveMatrix BusinessWorks Service Engine provides an ActiveMatrix container to deploy ActiveMatrix BusinessWorks projects using the TIBCO ActiveMatrix Administrator. Before installing TIBCO ActiveMatrix BusinessWorks Service Engine, you need to install TIBCO Designer Add-in for TIBCO Business Studio. TIBCO Designer Add-in for TIBCO Business Studio is used for running TIBCO Designer in TIBCO Business Studio. Note: This product is only available on Windows platform.

21 Installation Requirements 7 Oracle Software Requirements You need copies of the Oracle JDBC Driver package and the Oracle AQ API package on your machine, as they will be required during the installation. The JDBC Driver package is located under the ORACLE_HOME\jdbc\lib directory. Choose the appropriate JAR file, ojdbc5.jar, ojdbc6.jar or ojdbc14.jar. The AQ API package, aqapi.jar, is located under the ORACLE_HOME\RDBMS\jlib directory. Refer to the readme file for TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite for the supported version. Supported Platforms The platforms supported by TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite are listed in Table 3. Table 3 Supported Platforms, Package Names, Hardware Platforms, and Disk Space Platform Package Names Hardware Platform Disk Space (MB) Microsoft Windows Server 2003 SP1 Microsoft Windows Server 2008 Microsoft Windows XP Solaris 8, 9, 10 Solaris 10 SUSE Linux Enterprise 10.x Red Hat Enterprise Linux 4.x, 5.x. HP-UX 11i v2/11.23, v3/11.31 HP-UX 11i v1, v2, v3 AIX 5.3, 6.1 TIB_bwpluginoracleebs-simple_version _number_win_x86.exe TIB_bwpluginoracleebs-simple_version _number_sol8_sparc.bin TIB_bwpluginoracleebs-simple_version _number_sol10_x86.bin TIB_bwpluginoracleebs-simple_version _number_linux24gl23_x86.bin TIB_bwpluginoracleebs-simple_version _number_hpux112_ia64.bin TIB_bwpluginoracleebs-simple_version _number_hpux111_hppa.bin TIB_bwpluginoracleebs-simple_version _number_aix52_power.bin x86 55 SPARC 30 x86 30 x86 30 IA64 Itanium 30 PA-RISC 30 POWER 30

22 8 Chapter 1 Introduction Installer Account Microsoft Windows You must have administrator privileges for the machine on which TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite is installed. If you do not have administrator privileges, the installer exits. You must then either log out of the system and log in as a user with the required privileges, or request your system administrator to assign the privileges to your account. UNIX can be installed by regular (non-root) users and super-users (root). Installing from Network Drive If you intend to install the product on a network drive, you must ensure that the account used for installation has permission to access the network drive.

23 9 Chapter 2 Installing and Uninstalling TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite This chapter describes how to install and uninstall TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite on Microsoft Windows platforms and UNIX platforms. Topics Installation, page 10 Uninstallation, page 16

24 10 Chapter 2 Installing and Uninstalling Installation Use one of the following modes to install TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite: Installing In GUI Mode Installing In Console Mode Installing In Silent Mode If an error The wizard cannot continue because of the following error: could not load wizard specified in /wizard.inf(104) occurs when installing on Linux platforms, use the following command to launch the installer: %./TIB_bwpluginoracleebs-simple_version_number_platform.bin -is:javahome JRE_HOME If you install the plug-in with JAVA_HOME set or using -is:javahome TIBCO_HOME/jre/1.x.0 (1.5.0 or 1.6.0) for Redhat 5.x and SUSE 10.x, the plug-in installation does not include the Tibuninstall.bin file under the TIBCO_HOME/bw/plugins/oracleebs/_uninst folder. Execute the following commands in the Linux terminal to launch the installer: $ export PATH= TIBCO_HOME/jre/1.x.0/bin:$PATH $ cd TIBCO_HOME/bw/plugins/oracleebs/_uninst $ java -cp uninstaller.jar run Installing In GUI Mode To install the product in GUI mode: 1. Open the physical media or download the TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite package. 2. Extract the product s archive file to a temporary directory. 3. Run the installer. You can do so in one of the following ways: Navigate to the temporary directory and double-click the installer icon. On the command prompt, provide the absolute path of the installer file without specifying any options. The installer defaults to the GUI mode. 4. Click the Next button on the Welcome screen. 5. Read through the license text when the License Agreement screen appears. Select the I Accept The Terms Of The License Agreement radio button, and then click the Next button.

25 Installation After the Base Product screen appears, select the specific version of TIBCO ActiveMatrix BusinessWorks that the plug-in will be applied to if two or more versions of TIBCO ActiveMatrix BusinessWorks are installed on your machine. Click the Next button. Figure 1 Select the TIBCO ActiveMatrix BusinessWorks Version 7. On the Installation Home screen, review the installation home directory. This is the TIBCO ActiveMatrix BusinessWorks directory by default, and can t be changed. Click the Next button. 8. Select the Typical or Custom radio button. Click the Next button. See Installation Types for an explanation of the difference between the Typical and Custom installation types.

26 12 Chapter 2 Installing and Uninstalling Figure 2 Select the Installation Type 9. Click the Browse button, navigate to the Oracle JDBC Driver Package location and the Oracle AQ API Package location, and then click the Next button. See Oracle Software Requirements for the package location and supported version. Figure 3 Package Selection

27 Installation Review the information on the Installation Preview screen. Click the Next button to start the installation. 11. Review the information on the Installation Summary screen. Click the Finish button to exit the installer. Installing In Console Mode Console mode allows you to install the software from a command line. The installer will prompt you for values. To install the plug-in in console mode, follow these steps: 1. Open the physical media or download the TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite package. 2. Extract the product s archive file to a temporary directory. 3. Using a console window, navigate to the temporary directory. 4. Type the following command: On Microsoft Windows TIB_bwpluginoracleebs-simple_version_number_win_x86.exe -is:javaconsole -console On UNIX For example, on Solaris 8 system: %./TIB_bwpluginoracleebs-simple_version_number_sol8_sparc.bin -is:javaconsole -console 5. Complete the installation by responding to the console window prompts. When running in console mode you can move through the installation process as follows: Enter Key or 1 = Moves forward in the installer 2 = Goes back to previous screen 3 = Cancels the Wizard and exits the installation or uninstallation 4 = Redisplays the current screen Installing In Silent Mode Silent mode allows you to install the software without prompting you for information.

28 14 Chapter 2 Installing and Uninstalling Install Using Default Values To install the plug-in in silent mode, follow these steps: 1. Open the physical media or download the TIBCO ActiveMatrix BusinessWorks Plug-in for Oracle E-Business Suite package. 2. Extract the product s archive file to a temporary directory. 3. Using a console window, navigate to the temporary directory. 4. Type the following command: On Microsoft Windows TIB_bwpluginoracleebs-simple_version_number_w32.exe -silent On UNIX For example, on Solaris 8 system: %./TIB_bwpluginoracleebs-simple_version_number_sol8_sparc.bin -silent Install Using a Response File 1. Generate a response file You can generate a response file during installation which you can later use to invoke the installer with the selected values as default values (GUI mode) or as selected values (silent mode). To generate a response file, type the following command: On Microsoft Windows TIB_bwpluginoracleebs-simple_version_number_w32.exe -options-record C:\directoryPath\responseFile On UNIX For example, on Solaris 8 system: %./TIB_bwpluginoracleebs-simple_version_number_sol8_sparc.bin -options-record /directorypath/responsefile 2. Install using the response file

29 Installation 15 To install using the response file, type the following command: On Microsoft Windows TIB_bwpluginoracleebs-simple_version_number_w32.exe -options C:\directoryPath\responseFile On UNIX For example, on Solaris 8 system: %./TIB_bwpluginoracleebs-simple_version_number_sol8_sparc.bin -options /directorypath/responsefile

30 16 Chapter 2 Installing and Uninstalling Uninstallation The uninstaller allows you to run in different modes. Each mode is supported on all platforms. Uninstalling In GUI Mode Uninstalling In Console Mode Uninstalling In Silent Mode Uninstalling In GUI Mode To run the uninstaller in GUI mode, follow the platform-specific instructions listed below: On Microsoft Windows Use one of the following options: Click Start > Programs > TIBCO > TIBCO ActiveMatrix BusinessWorks version_number > Plugin-Oracle E-Business Suite > Uninstall. Navigate to the _uninst directory located in the plug-in installation home directory and invoke the Tibuninstall.exe program. On UNIX Navigate to the _uninst directory located in the plug-in installation home directory and invoke the Tibuninstall.bin program. Follow the prompts from the wizard to uninstall the plug-in. Uninstalling In Console Mode To run the uninstaller in console mode, execute the following steps: 1. Using a command window, navigate to the _uninst directory located in the plug-in installation home directory. 2. Type the following command at the command prompt: On Microsoft Windows Tibuninstall.exe -is:javaconsole -console On UNIX %./Tibuninstall.bin -is:javaconsole -console Complete the uninstallation by responding to the console window prompts.

31 Uninstallation 17 Uninstalling In Silent Mode To run the uninstaller in silent mode, execute the following steps: 1. Using a command window, navigate to the _uninst directory located in the plug-in installation home directory. 2. Type the following command at the command prompt: On Microsoft Windows Tibuninstall.exe -is:javaconsole -silent On UNIX %./Tibuninstall.bin -is:javaconsole -silent

32 18 Chapter 2 Installing and Uninstalling

33 19 Index C Customer Support xiii installer account Microsoft Windows 8 UNIX 8 D Disk Space 4 O ORACLE_HOME xi E ENV_HOME xi R Related Documentation x G General Typographical Conventions general xi S Software Requirements 5 Supported Platforms 7 I Installation Installation History 3 Installation Registry 3 Installation Requirements 4 Installation mode Console mode 2 GUI mode 2 Silent mode 2 Installation Type 2 Custom 2 Typical 2 T Technical Support xiii Third-Party Documentation x TIBCO_HOME xi Typographical Conventions general xi U Uninstallation 16 USER_HOME xi Installation