EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution

Transcription

1 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide P/N REV 02

2 Copyright EMC Corporation. All rights reserved. Published in the USA. Published January, 2014 EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. The information in this publication is provided as is. EMC Corporation makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose. Use, copying, and distribution of any EMC software described in this publication requires an applicable software license. EMC 2, EMC, and the EMC logo are registered trademarks or trademarks of EMC Corporation in the United States and other countries. All other trademarks used herein are the property of their respective owners. For the most up-to-date regulatory document for your product line, go to EMC Online Support ( 2 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

3 CONTENTS Preface Revision History Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Overview Bare Metal Recovery overview Terminology How BMR works with NetWorker and NetWorker Module for Microsoft Recommendations Bare Metal Recovery Protecting the application data before a disaster Using NetWorker for performing BMR Bare Metal Recovery of Microsoft Active Directory Active Directory Backing up Active Directory for BMR BMR of Active Directory Bare Metal Recovery of Microsoft SQL Server SQL Server 2012 and 2008 R Backing up SQL Server 2012 or 2008 R2 for BMR by using the VDI technology BMR of SQL Server 2012 or 2008 R SQL Server 2008 and Backing up SQL Server 2008 or 2005 for BMR by using the VSS technology 32 BMR of SQL Server 2008 or Bare Metal Recovery of Microsoft SharePoint Server SharePoint Server 2013 and Backing up SharePoint Server 2013 or 2010 for BMR BMR of SharePoint Server 2013 or SharePoint Server Backing up SharePoint Server 2007 for BMR BMR of SharePoint Server EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide 3

4 Contents Chapter 6 Chapter 7 Chapter 8 Chapter 9 Bare Metal Recovery of Microsoft Exchange Server Exchange Server Backing up Exchange Server 2013 for BMR BMR of Exchange Server Exchange Server Backing up Exchange Server 2010 for BMR BMR of Exchange Server Exchange Server Backing up Exchange Server 2007 for BMR BMR of Exchange Server Bare Metal Recovery of Microsoft Hyper-V Hyper-V Backing up Hyper-V for BMR BMR of Hyper-V Bare Metal Recovery of Microsoft System Center Virtual Machine Manager Overview Virtual Machine Manager server Backing up VMM server for BMR BMR of VMM server Virtual Machine Manager library Backing up VMM library for BMR BMR of VMM library Virtual Machine Manager database Backing up VMM database for BMR BMR of VMM database Virtual Machine Manager environment Protecting data on Hyper-V virtual machines Troubleshooting 4 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

5 PREFACE As part of an effort to improve its product lines, EMC periodically releases revisions of its software and hardware. Therefore, some functions described in this document might not be supported by all versions of the software or hardware currently in use. The product release notes provide the most up-to-date information on product features. Contact your EMC technical support professional if a product does not function properly or does not function as described in this document. Note: This document was accurate at publication time. Go to EMC Online Support ( to ensure that you are using the latest version of this document. Purpose Audience Related documentation The purpose of this guide is to provide detailed information about performing Windows Bare Metal Recovery by using EMC NetWorker Module for Microsoft. This guide is part of the EMC NetWorker Module for Microsoft documentation set. It is intended for use by system administrators to perform Windows Bare Metal Recovery of Microsoft applications. Readers should be familiar with the following technologies used in backup and recovery: EMC NetWorker software EMC NetWorker snapshot management Microsoft Volume Shadow Copy Service (VSS) technology Table 1 on page 5 lists the EMC publications that provide additional information. Table 1 EMC publications for additional information (page 1 of 2) Guide names NetWorker Module for Microsoft Release 3.0 SP1 Release Notes NetWorker Module for Microsoft Release 3.0 SP1 Installation Guide NetWorker Module for Microsoft Release 3.0 SP1 Administration Guide NetWorker Module for Microsoft for SQL and SharePoint VSS Release 3.0 SP1 User Guide NetWorker Module for Microsoft for SQL VDI Release 3.0 SP1 User Guide NetWorker Module for Microsoft for Exchange VSS Release 3.0 SP1 User Guide Description Contains information about new features and changes, problems fixed from previous releases, known limitations, and late-breaking information that was not updated in the remaining documentation set. Contains preinstallation, installation, silent installation, and post installation information about NMM 3.0 SP1. Contains information common to all the supported Microsoft applications that can be backed up and recovered by using EMC NetWorker Module for Microsoft. Contains information about backup and recovery of SQL Server VSS and SharePoint Server VSS by using EMC NetWorker Module for Microsoft. Contains information about backup and recovery of SQL Server VDI by using EMC NetWorker Module for Microsoft. Contains information about backup and recovery of Exchange Server VSS by using EMC NetWorker Module for Microsoft. Preface 5

6 Preface Table 1 EMC publications for additional information (page 2 of 2) Guide names NetWorker Module for Microsoft for Hyper-V VSS Release 3.0 SP1 User Guide Description Contains information about backup and recovery of Hyper-V Server VSS by using EMC NetWorker Module for Microsoft. NetWorker Performing backup and recovery of SharePoint Server by using NetWorker Module for Microsoft SQL VDI solution Release 3.0 SP1 Technical Notes NetWorker Performing Exchange Server Granular Recovery by using NetWorker Module for Microsoft with Ontrack PowerControls Release 3.0 SP1 Technical Notes Provides information for performing backup and recovery of a SharePoint Server by using the SQL Server Virtual Device Interface (VDI) technology and the SharePoint VSS Writer with NMM. Provides information about using NMM with Ontrack PowerControls to perform granular level recovery (GLR) of deleted Microsoft Exchange Server mailboxes, public folders, and public folder mailboxes. NetWorker Cloning Integration Guide NetWorker SolVe Desktop NetWorker Licensing Guide NetWorker Software Compatibility Guide NetWorker Data Domain Deduplication Devices Integration Guide NetWorker Avamar Integration Guide NetWorker documentation set Contains planning, practices, and configuration information for using the NetWorker, NMM, and NMDA cloning feature. An executable download that can be used to generate precise, user-driven steps for high demand tasks carried out by customers, support, and the field. Contains information about licensing NetWorker and its modules. Contains a list of supported client, server, and storage node operating systems for the following software products: NetWorker and NetWorker application modules and options (including deduplication and virtualization support), AlphaStor, Data Protection Advisor, and HomeBase. Contains planning and configuration information on the use of Data Domain devices for data deduplication backup and storage in a NetWorker environment. Contains planning and configuration information on the use of Avamar in a NetWorker environment. Contains the documentation that is available with NetWorker. Conventions used in this document EMC uses the following conventions for special notices: NOTICE is used to address practices not related to personal injury. Note: A note presents information that is important, but not hazard-related. Typographical conventions EMC uses the following type style conventions in this document: Bold Use for names of interface elements, such as names of windows, dialog boxes, buttons, fields, tab names, key names, and menu paths (what the user specifically selects or clicks) Italic Use for full titles of publications referenced in text Monospace Use for: System output, such as an error message or script System code Pathnames, filenames, prompts, and syntax Commands and options Monospace italic Use for variables. 6 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

7 Preface Monospace bold Use for user input. [ ] Square brackets enclose optional values Vertical bar indicates alternate selections the bar means or { } Braces enclose content that the user must specify, such as x or y or z... Ellipses indicate nonessential information omitted from the example Where to get help Your comments EMC support, product, and licensing information can be obtained as follows: Product information For documentation, release notes, software updates, or information about EMC products, go to EMC Online Support at: Technical support Go to EMC Online Support and click Service Center. You will see several options for contacting EMC Technical Support. Note that to open a service request, you must have a valid support agreement. Contact your EMC sales representative for details about obtaining a valid support agreement or with questions about your account. Online communities Visit EMC Community Network for peer contacts, conversations, and content on product support and solutions. Interactively engage online with customers, partners, and certified professionals for all EMC products. Your suggestions will help us continue to improve the accuracy, organization, and overall quality of the user publications. Send your opinions of this document to: BRSdocumentation@emc.com 7

8 Preface 8 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

9 REVISION HISTORY your clarifications or suggestions for this document to: The following table presents the revision history of this document. Revision Date Description of added or changed sections 02 January 06, 2014 Second release of this document. The following are the updates in this revision: The list of documents in the NMM documentation set has been updated. Related documentation on page 5 provides the list. Incorporated technical feedback. 01 November 14, 2013 First release of this document for the Direct Availability (DA) release of EMC NetWorker Module for Microsoft Release 3.0 SP1. Revision History 9

10 Revision History 10 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

11 CHAPTER 1 Overview This chapter includes the following sections: Bare Metal Recovery overview Terminology How BMR works with NetWorker and NetWorker Module for Microsoft Recommendations Overview 11

12 Overview Bare Metal Recovery overview This guide provides detailed information about Windows Bare Metal Recovery (BMR) solution by using EMC NetWorker and EMC NetWorker Module for Microsoft (NMM), how this solution works, and the procedures that you are required to follow for disaster recovery of the supported Microsoft applications. BMR is a technique in the field of data recovery and restoration where the backed up data is available in a form that allows you to restore a system from bare metal, that is, without any requirements as to previously installed software or operating system. Typically, the backed up data includes the necessary operating system, applications, and data components to rebuild or restore the backed up system to an entirely separate piece of hardware. The hardware receiving the restore should have a similar configuration as that of the hardware that was the source of the backup. The basic BMR is the process of bringing up a server after a disaster and ensuring that the system recovers with the operating system, the applications, and the data as they were at the time of the failure. Restoring a server to the exact configuration that it had at the time of its destruction can be a difficult task. When this restoration is performed to another hardware, it can add to the complexity of the process and can be time-consuming. Windows BMR solution provides a flexible and reliable method of restoring a server after a disaster. Windows BMR support is available on the following platforms: Windows Server 2012 (x64) Windows Server 2008 SP2 (x86 and x64) Windows Server 2008 R2 SP1 (x64) Windows Server 2008 R2 (x64) Windows Server 2008 (x86 and x64) You can use the BMR support for the following Microsoft applications: Exchange Server 2013 Exchange Server 2010 Exchange Server 2007 SharePoint Server 2013 SharePoint Server 2010 SharePoint Server 2007 Hyper-V Server SQL Server 2012 SQL Server 2008 R2 SQL Server 2008 SQL Server 2005 Active Directory System Center Virtual Machine Manager The NetWorker Software Compatibility Guide provides the information about the versions of the supported operating systems, the software and hardware requirements, and the exact versions of the Microsoft applications that Windows BMR supports. For BMR support, you must have installed NetWorker server 7.6 SP3 or later, NetWorker client 8.1.1, and NetWorker Management Console 8.0 or later along with NMM 3.0 SP1. 12 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

13 Overview Terminology This section defines terms that are used in this document to describe NetWorker support for Windows BMR. Application data User data such as a log file that is created by the application, or user data such as an application database that is created with the application. For example, an SQL Server s application data includes its databases and log files. Application data is neither included in nor recoverable from a Windows BMR operation. Application data must be backed up and recovered with NMM. ASR Writer The Volume Shadow Copy Service (VSS) writer that is responsible for identifying critical data that is needed to perform an offline restore. Boot Configuration Data (BCD) The BCD store contains boot configuration parameters, and controls how Microsoft Windows Server 2008 operating system starts. A backup of this ASR Writer component is required to perform an offline restore. Critical Volume A critical volume includes: Any volume that contains system state files or files for an installed service, including volumes mounted as NTFS directories that contain such files. An example of an installed service is the Exchange 2010 application binaries. However, the Exchange database and log files are not considered critical. Any parent volume where a critical volume is mounted. All volumes on all dynamic disks if at least one of those volumes is critical. A current backup of all critical volumes that is required to perform a Windows BMR. Disaster recovery The restoration of a computer operating system and its data after a catastrophic failure such as a hard disk failure or the corruption of critical operating system components. A disaster recovery might not be a bare metal recovery. NetWorker Windows BMR image A bootable image that contains NetWorker binaries and a wizard to control the Windows BMR process. Non-critical volume A volume that contains files that are not part of the system state or an installed service. Offline restore A restore operation that is performed from the NetWorker Windows Disaster Recovery boot image. An offline restore is an automated process, and does not require the manual installation of an operating system. A BMR is an offline restore. Online restore A restore operation that is performed from the regular NetWorker recover user interface. An online restore requires that the computer has been booted from an installed operating system. Terminology 13

14 Overview How BMR works with NetWorker and NetWorker Module for Microsoft Recommendations From NMM 3.0 onwards, Windows file system backup and recovery must be performed by using the NetWorker client, and application-specific backup and recovery must be performed by using NMM. Specific information about how the backup and recovery process for various Microsoft applications in NMM 3.0 differs from previous NMM releases is provided in application-specific user guides. NetWorker disaster recovery provides an automated BMR solution by using the Windows ASR writer and other VSS writers to identify critical volumes that are needed to perform a disaster recovery on a disabled system. BMR is performed offline, that is, when the Windows operating system is inactive. This avoids the necessity to manually reinstall Windows, and the problems that occur when operating system files are being restored to an active Windows system. NMM 3.0 SP1 is compatible with the NetWorker client, which provides a true BMR capability for Windows Server 2012, Windows Server 2008 R2, and Windows Server This capability is built into the NetWorker client and provides BMR support to the same or similar hardware. For Windows BMR, you should download the appropriate.iso recovery boot image file from EMC Online Support ( The ISO image provides a wizard that allows you to format disks, recover Windows critical volumes from backup, and reboot the server to bring it back online. The Obtain the Windows Bare Metal Recovery wizard section in the NetWorker Release 8.1 SP1 Administration Guide provides information about how to download the recovery boot image. The NetWorker Release 8.1 SP1 Administration Guide provides information about how to use NetWorker for Windows BMR. Review the information in the guide before proceeding with the procedures in this document. The following are the recommendations for performing the Windows BMR recovery: The BMR capability of NetWorker uses supported Microsoft technologies to perform disaster recovery backups and recoveries of Windows clients and servers. Microsoft supports BMR recoveries to the same or similar hardware. The following Microsoft KB article provides the requirements to perform a BMR recovery to similar hardware: You can use the NetWorker Windows BMR 32-bit ISO image to recover an x86 operating system on either an x86 or x64 computer. You can use the NetWorker Windows BMR 64-bit ISO image to recover only an x64 operating system on an x64 computer. 14 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

15 Overview Review and follow these CPU guidelines: The operating system architecture and the processor architecture must match. You can treat AMD or Intel processors as being the same if they follow the same architecture. You can recover the operating system backup of an AMD x64 computer to an Intel x64 computer. The process is reversible. You can restore the backup of an x86 operating system version only to an x86 processor computer. You can restore the backup of an x64 operating system version only to an x64 processor computer. Review and follow these hard disk requirements: The disk or RAID drivers that are used in the old system must be compatible with the disk or RAID controllers in the new system. For each critical disk on the BMR target system, the startup hard disk capacity on the new system must be greater than or equal to the capacity on the old system. BMR fails if the capacity is smaller by even a single byte. Windows BMR supports IDE, SATA, or SCSI hard disks. You can perform the backup on one type of hard disk and recover on another type. For example, SAS to SATA is supported. You must restore the backup to the same logical disk numbers as on the original server. You cannot use different logical disk numbers on the target system to recover the critical volumes such as the operating system volume. Ensure that the RAID setup on destination computer does not interfere with the disk order of the hard disks. After a Windows BMR recovery, you must install new network interface card drivers that match the NIC in the new computer after Windows boots on the new server. Windows BMR backs up only critical volumes, and can be used for offline disaster recovery. You must use the NetWorker client to back up the critical and non-critical volumes. NetWorker considers only system volume as a critical volume. If you have installed a Microsoft application on a drive other than the system drive, the drive is not considered as critical. On Windows Server 2008 R2, a volume is critical if a Microsoft application has installed a Windows service on it, but on Windows Server 2012, a volume that has a Windows application service installed is not critical. To make a volume critical on Windows Server 2012, set the value of the HKLM\System\CurrentControlSet\Control\SystemWriter\ReportWin32ServicesNonSys temstate registry key to 0. This ensures that BMR includes the Microsoft application binaries, and the volume on which they are installed is marked as critical. Recommendations 15

16 Overview Ensure that System Reserved Partition (SRP) is online before you perform a BMR backup. Otherwise, the backup fails and displays the following error message: 84687:save: Unable to get volume information of file system '\\?\Volume{245204f6-5ff7-11e2-a3ac-806e6f6e6963}\': The device is not ready. (Win32 error 0x15). VSS OTHER: ERROR: VSS failed to process snapshot: The shadow copy provider had an unexpected error while trying to process the specified operation. (VSS error 0x f) 90108:save: Unable to save the SYSTEM STATE save sets: cannot create the snapshot :save: Error occured while saving disaster recovery save sets. If SRP is offline, perform the following steps to bring it online: 1. In the command prompt, type diskpart and press Enter. 2. Run the following command to display the list of volumes: DISKPART> list volume 3. Run the following command to select the volume that is offline: DISKPART> select volume_name 4. Run the following command to bring the selected volume online: DISKPART> online volume 16 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

17 CHAPTER 2 Bare Metal Recovery This chapter includes the following sections: Protecting the application data before a disaster Using NetWorker for performing BMR Bare Metal Recovery 17

18 Bare Metal Recovery Protecting the application data before a disaster To prepare for disaster recovery, back up application data and other files: 1. Use NetWorker client to back up non-application files. The NetWorker Release 8.1 SP1 Administration Guide provides details about using NetWorker client to back up the non-application files. 2. Create a NetWorker group without the Snapshot option enabled. 3. Create a NetWorker client resource, and assign it to the group that you created in step Configure the NetWorker client resource by specifying All in the Save set field, and clearing the Backup command and Application information fields. 5. Perform a backup. 6. Use NMM to perform a full backup of application data. The NetWorker Module for Microsoft Release 3.0 SP1 application specific user guides provide details about performing a full backup. Using NetWorker for performing BMR To support Windows BMR, NetWorker provides a bootable Windows BMR image that contains NetWorker binaries and a wizard to control the disaster recovery process. The Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.1 SP1 Administration Guide provides detailed information about how to use the NetWorker Windows BMR image to perform a BMR recovery on protected hosts and VMware virtual machines. For all the Microsoft applications, after performing Windows disaster recovery and restarting the system, check all the disk and volume configurations. In most cases, the disks and volumes appear as on the original system. However, it is possible, especially in BMR scenarios, that the volume or disk signatures do not match the original ones, and the non-critical volumes or disks are offline and not mounted. Use the Microsoft Disk Manager to bring the volumes and disks online, and then restart the system for drive letter reassignments. If there are any issues with the drive letter reassignments, assign drive letters to the non-critical volumes and disks, as needed. Non-critical volumes that are accessed by mount points might have a similar issue. 18 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

19 CHAPTER 3 Bare Metal Recovery of Microsoft Active Directory This chapter includes the following section: Active Directory Bare Metal Recovery of Microsoft Active Directory 19

20 Bare Metal Recovery of Microsoft Active Directory Active Directory Backing up Active Directory for BMR This section provides BMR backup and recovery procedures for Active Directory. To back up Active Directory for BMR: 1. Create a backup group for Active Directory: a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. The backup group is created. 2. Create a client resource for Active Directory, and perform the backup: a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the client resource. c. Click OK. The client resource is created. d. Right-click the client and select Properties. The Client Properties dialog box appears. e. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify All. f. Select the Apps & Modules tab. g. Ensure that the Backup command and Application information fields are clear. h. Specify other fields according to your requirements. i. Click OK. 3. Perform the backup. 20 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

21 Bare Metal Recovery of Microsoft Active Directory BMR of Active Directory To perform the BMR of Active Directory: 1. Perform the procedures that are mentioned in the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.1 SP1 Administration Guide. 2. Verify whether you can successfully log in as the domain administrator. 3. Verify whether all Active Directory objects are present in both Active Directory Users and Computers and Domain Name System management. Active Directory 21

22 Bare Metal Recovery of Microsoft Active Directory 22 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

23 CHAPTER 4 Bare Metal Recovery of Microsoft SQL Server This chapter includes the following sections: SQL Server 2012 and 2008 R SQL Server 2008 and Bare Metal Recovery of Microsoft SQL Server 23

24 Bare Metal Recovery of Microsoft SQL Server SQL Server 2012 and 2008 R2 This section provides BMR backup and recovery procedures for SQL Server 2012 and 2008 R2 by using the VDI technology in a cluster environment. Backing up SQL Server 2012 or 2008 R2 for BMR by using the VDI technology Configuring an SQL Server client resource To back up SQL Server for BMR by using the VDI technology, first you should configure a SQL Server client resource. You can create a client resource: By using the Client Configuration Wizard on page 24 By using the NetWorker Administrator program on page 26 By using the Client Configuration Wizard You should separately create a client resource for backing up the application data and the file system data which includes the DISASTER_RECOVERY: save set. Creating a client resource for backing up the application data The By using the Client Configuration Wizard section in the NetWorker Module for Microsoft for SQL VDI Release 3.0 SP1 User Guide provides information about creating a client resource for backing up the application data. Creating a client resource for backing up the file system data To create a client resource for backing up the file system data: 1. In the Administration window of the NetWorker Management Console, do one of the following: Click Configuration > Client Backup Configuration > New. Right-click the client and from the menu that appears, click Client Backup Configuration > New. 2. In the Specify the Client Name and Type page: a. In the Client name field, specify the name of the client resource. b. Select Traditional NetWorker Client. c. Click Next. The wizard automatically detects the applications that are installed on the client specified in the Specify the Client Name and Type page, and displays the list from which you can select the backup type. 3. In the Specify the Backup Configuration Type page: a. From the Available Applications list, select Filesystem. b. Click Next. 24 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

25 Bare Metal Recovery of Microsoft SQL Server 4. In the Specify the Client Backup Options page: a. Select either a NetWorker volume pool or another target pool. If the Target Pool field is blank, the client will not be associated to any pool. b. Under Deduplication, select one of the following options: None If you have not set up data deduplication. Data Domain backup If you are using a Data Domain device for data deduplication. Avamar deduplication backup If you are using an Avamar device for data deduplication. After selecting this option, choose the Avamar node from the available list. c. Click Next. 5. In the Select Files to Backup page: a. Select the save sets that you want to back up. Selecting the DISASTER_RECOVERY: save set automatically selects the dependent drives for the backup. b. Click Next. 6. In the Select the Client Properties page: a. Select browse policy, retention policy, and backup schedule for the backup from the respective drop-down lists. b. In the Client Comment field, specify a comment for the client resource. c. Click Next. 7. In the Choose the Backup Group page, select one of the following options and click Next: Add to an existing group Select a group from the existing list. Only groups with valid snapshot policies are available for selection. After an existing group is selected, if a storage node is being used in your configuration setup, the Specify the Storage Node Options page appears. Create a new group Perform the following: In the Group Name field, specify a name for the group. In the Client Retries field, either select or specify 0. In the Scheduled Backup Start Time field, specify the time at which the scheduled backup should start. Select Automatically start the backup at the scheduled time to start the backup automatically at the specified time. SQL Server 2012 and 2008 R2 25

26 Bare Metal Recovery of Microsoft SQL Server 8. In the Specify the Storage Node Options page: a. Under Backup Storage Nodes, select one of the following options and click Next: Backup to NetWorker server only If you are not using a NetWorker storage node. Backup to the following storage nodes If you are using a NetWorker storage node. Select the storage nodes. b. Click Next. 9. In the Backup Configuration Summary page, review the details and click Create to create a client resource. The Check Results page appears with the details about the client resource that has been created. 10. To verify the details of the client, select the client and view the Client Properties page in the NetWorker Management Console. By using the NetWorker Administrator program The procedures use the following sample SQL Server configuration: SQL Server is installed on cluster volume P:\. The cluster quorum drive is E:\. All drives in the cluster are clustered except for the C:\ drive. The procedures are applicable to 2012, 2008, and 2005 versions also, in a cluster environment. To back up SQL Server for BMR: 1. Create a backup group for SQL Server: a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. The backup group is created. 2. Create a client resource to back up the DISASTER_RECOVERY:\ save set on the active node: a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the active node. c. Click OK. The client resource is created. 26 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

27 Bare Metal Recovery of Microsoft SQL Server d. Right-click the client and select Properties. The Client Properties dialog box appears. e. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify DISASTER_RECOVERY:\. f. Specify other fields according to your requirements. g. Click OK. 3. Perform the backup. 4. Perform step 2 and step 3 for the passive node. 5. Create a client resource with Windows cluster name to back up the All save set (quorum drive): a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the Windows cluster. c. Click OK. The client resource is created. d. Right-click the client and select Properties. The Client Properties dialog box appears. e. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify All. f. Specify other fields according to your requirements. g. Click OK. 6. Perform the backup. 7. Create a client resource with SQL virtual name to back up the All save set (SQL cluster drives): a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the SQL virtual name. c. Click OK. The client resource is created. d. Right-click the client and select Properties. The Client Properties dialog box appears. SQL Server 2012 and 2008 R2 27

28 Bare Metal Recovery of Microsoft SQL Server e. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify All. f. Specify other fields according to your requirements. g. Click OK. 8. Perform the backup. 9. Create a client resource with SQL virtual name to back up the SQL application data: a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the SQL virtual name. c. Click OK. The client resource is created. d. Right-click the client and select Properties. The Client Properties dialog box appears. e. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify MSSQL if the SQL instance is either the default instance or a named instance in the cluster. f. Under the Apps & Modules tab, in the Backup command field, specify nsrsqlsv. g. Specify other fields according to your requirements. h. Click OK. 10. Create dummy client resources for the physical nodes of the cluster. 11. Perform the backup. 28 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

29 Bare Metal Recovery of Microsoft SQL Server BMR of SQL Server 2012 or 2008 R2 The BMR process recovers C: drive only. It does not recover the SQL data, the quorum and SQL cluster drives, and the system databases such as master, msdb, and model. To perform the BMR of SQL Server 2008 R2: 1. Separately recover active and passive nodes by performing the procedures that are mentioned in the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.1 SP1 Administration Guide. 2. Recover the cluster quorum database: a. After the active and passive nodes are up and running, ensure that the cluster disks are online on the active node in the Disk Management Console of the Windows User Interface (UI). b. Add the quorum drive to Failover Cluster Management of the Cluster Configuration UI, as shown in Figure 1 on page 29. Figure 1 Quorum drive configuration in Failover Cluster Management c. Select the Storage node in Failover Cluster Management and ensure that the quorum disk is online as shown in Figure 2 on page 30. SQL Server 2012 and 2008 R2 29

30 Bare Metal Recovery of Microsoft SQL Server Figure 2 Quorum drive statistics on the Storage page in Failover Cluster Management d. On the SQL Server active node, start the NetWorker User program. e. Click Recover. f. In the Source Client dialog box, select the source client with the Windows cluster name, and click OK. g. In the Destination Client dialog box, select the destination client with the active node name, and click OK. h. Select the quorum drive, and recover it. 3. Recover the SQL cluster drives: a. Add the SQL drives to Failover Cluster Management of the Cluster Configuration UI, as shown in Figure 3 on page 30. Figure 3 Adding SQL drives to Failover Cluster Management 30 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

31 Bare Metal Recovery of Microsoft SQL Server b. Ensure that the disk is online as shown in Figure 4 on page 31. Figure 4 Viewing disk drive status in Failover Cluster Management c. Configure the drive mount points between these drives to be the same as they were at the time of the backup. d. On the SQL Server active node, start the NetWorker User program. e. Click Recover. f. In the Source Client dialog box, select the source client with the SQL virtual name, click OK. g. In the Destination Client dialog box, select the destination client with the active node name, and click OK. h. Select all the SQL cluster drives, and recover them. 4. Build the msdb and model databases: a. Start the physical nodes of the cluster. b. Ensure that you have the SQL Server installation software on the active node. c. In the software, go to the folder where the SETUP file exists and run the following command: Setup /QUIET/ACTION=REBUILDDATABASE/INSTANCENAME=<SQL Server instance name>/sqlsysadminaccounts=<domain\administrator username>/iacceptsqlserverlicenseterms SQL Server 2012 and 2008 R2 31

32 Bare Metal Recovery of Microsoft SQL Server SQL Server 2008 and In the Failover Cluster Management window of the Cluster Configuration UI, perform the following: a. Open the SQL Server Properties dialog box. b. Under the Dependencies tab, add all the SQL Server dependencies that you must bring online before bringing the SQL Server online. For example, any dependent cluster disk. c. Bring the SQL virtual resources online. d. Bring the SQL Server online. e. Perform the failover and ensure that it is successful. To rebuild databases on SQL Server 2012, go to To rebuild databases on SQL Server 2008, go to To rebuild databases on SQL Server 2005, go to 6. Restore the databases by using the NetWorker User for SQL Server program: a. Start the NetWorker User for SQL Server program, and connect to the SQL virtual server instance. b. Browse for the backed up databases. c. Select the databases and restore them. This section provides BMR backup and recovery procedures for SQL Server 2008 and 2005 by using the VSS technology in a standalone environment. Backing up SQL Server 2008 or 2005 for BMR by using the VSS technology Configuring an SQL Server client resource To back up SQL Server for BMR by using the VSS technology, first you should configure a SQL Server client resource. You can create a client resource: By using the Client Configuration Wizard on page 32 By using the NetWorker Administrator program on page 33 By using the Client Configuration Wizard Perform the procedures described in By using the Client Configuration Wizard on page EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

33 Bare Metal Recovery of Microsoft SQL Server By using the NetWorker Administrator program To back up SQL Server 2008 or 2005 for BMR: 1. Create a backup group for SQL Server 2008 or 2005: a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. The backup group is created. 2. Create a client resource to back up the DISASTER_RECOVERY:\ save set: a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the client resource. c. Click OK. The client resource is created. d. Right-click the client and select Properties. The Client Properties dialog box appears. e. Under the General tab: In the Group list, select the group that you have created in step 1. In the Save set field, specify DISASTER_RECOVERY:\. f. Select the Apps & Modules tab. g. Ensure that the Backup command and Application information fields are clear. h. Specify other fields according to your requirements. i. Click OK. 3. Perform the backup. 4. Perform the All save set backup by using the NetWorker client. 5. For the backup group that you created in step 1, do the following: a. Right-click the backup group and select Properties. The Group Properties - <backup group name> dialog box appears. b. Select the Snapshot option. c. Select the appropriate Snapshot Policy and Snapshot Pool from the respective lists. d. Specify other fields according to your requirements. e. Click OK. SQL Server 2008 and

34 Bare Metal Recovery of Microsoft SQL Server 6. Create a client resource to back up the APPLICATIONS:\ SqlServerWriter save set: a. Perform step a through step d of step 2. b. Under the General tab: In the Group list, select the group that you have created in step 1. In the Save set field, specify APPLICATIONS:\ SqlServerWriter. c. Under the Apps & Modules tab: In the Backup command field, specify nsrsnap_vss_save. In the Application information field, specify NSR_SNAP_TYPE=VSS. d. Specify other fields according to your requirements. e. Click OK. 7. Perform the backup. BMR of SQL Server 2008 or 2005 The BMR process recovers C: drive only. It does not recover the SQL data, the quorum and SQL cluster drives, and the system databases such as master, msdb, and model. To perform the BMR of SQL Server 2008: 1. Perform the procedures that are mentioned in the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.1 SP1 Administration Guide. 2. Start the NMM GUI. 3. Select the server and click Recover. 4. Under the APPLICATIONS save set, select SqlServerWriter. 5. Perform the recovery. 6. Restart the machine if prompted. 7. Ensure that the SQL Server service is started for the recovered instance. 8. To verify whether the databases are recovered, open SQL Management Studio and connect to the instance. The databases that belong to the instance appear. 34 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

35 CHAPTER 5 Bare Metal Recovery of Microsoft SharePoint Server This chapter includes the following sections: SharePoint Server 2013 and SharePoint Server Bare Metal Recovery of Microsoft SharePoint Server 35

36 Bare Metal Recovery of Microsoft SharePoint Server SharePoint Server 2013 and 2010 This section provides BMR backup and recovery procedures for SharePoint Server 2013 and NMM 3.0 SP1 does not support BMR backup and recovery of SharePoint 2013 and 2010 standalone servers with SQL embedded. Backing up SharePoint Server 2013 or 2010 for BMR Configuring a SharePoint Server client resource To back up SharePoint Server for BMR, first you should configure a SharePoint Server client resource. You can create a client resource by using the NetWorker Administrator program. Table 2 on page 36 provides the sample SharePoint farm configuration that is used in the procedures. Table 2 Sample SharePoint Server 2010 configuration Components Operating system Application version Critical volume NetWorker build SQL Server Windows Server 2008 R2 SP1 SQL Server 2008 R2 SP1 SQL application is installed on the C: drive. Databases reside on the C: drive. NetWorker Web front-end server 1 Windows Server 2008 R2 SP1 SharePoint Server 2010 SP1 SharePoint Server 2010 Application is installed on C: drive. NetWorker Web front-end server 2 Windows Server 2008 R2 SP1 SharePoint Server2010 SP1 SharePoint Application is installed on the E: drive. So, the critical volumes are the C: and E: drives. NetWorker Backing up SharePoint Server 2010 includes backing up SQL Server, Web front-end server 1, and Web front-end server 2. Backing up SQL Server in a SharePoint Server 2010 environment To back up SQL Server in a SharePoint environment for BMR: 1. Create the first backup group for the SQL Server: a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. The first backup group is created. d. Right-click the backup group and select Properties. The Group Properties - <backup group name> dialog box appears. e. Do not select the Snapshot option. 36 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

37 Bare Metal Recovery of Microsoft SharePoint Server f. Specify other fields according to your requirements. g. Click OK. 2. Create the first client resource for the SQL Server: a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the client resource. c. Click OK. The first client resource is created. d. Right-click the client and select Properties. The Client Properties dialog box appears. e. Under the General tab: Ensure that the Scheduled backup option is selected. In the Group list, select the group that you created in step 1. In the Save set field, specify DISASTER_RECOVERY:\. f. Specify other fields according to your requirements. g. Click OK. 3. Perform the backup. 4. Create the second backup group for the SQL Server: a. Perform step a through step d of step 1. b. Select the Snapshot option. c. Specify other fields according to your requirements. d. Click OK. 5. Create the second client resource for the SQL Server: a. Perform step a through step d of step 2. b. Under the General tab: Ensure that the Scheduled backup option is selected. In the Group list, select the group that you created in step 4. In the Save set field, specify APPLICATIONS:\SqlServerWriter. c. Select the Apps & Modules tab. d. In the Backup command field, specify nsrsnap_vss_save. e. In the Application information field, specify NSR_SNAP_TYPE=vss. f. Specify other fields according to your requirements. g. Click OK. SharePoint Server 2013 and

38 Bare Metal Recovery of Microsoft SharePoint Server 6. Perform the backup. Backing up web front-end server 1 To perform the BMR backup of web front-end server 1: 1. Create the first backup group for the web front-end server 1: a. Perform step a through step d of step 1 in Backing up SQL Server in a SharePoint Server 2010 environment on page 36. b. Do not select the Snapshot option. c. Specify other fields according to your requirements. d. Click OK. 2. Create the first client resource for the web front-end server 1: a. Perform step a through step d of step 2 in Backing up SQL Server in a SharePoint Server 2010 environment on page 36. b. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify DISASTER_RECOVERY:\. c. Specify other fields according to your requirements. d. Click OK. 3. Perform the backup. 4. Create the second backup group for the web front-end server 1: a. Perform step a through step d of step 1 in Backing up SQL Server in a SharePoint Server 2010 environment on page 36. b. Select the Snapshot option. c. Specify other fields according to your requirements. d. Click OK. 5. Create the second client resource for the web front-end server 1: a. Perform step a through step d of step 2 in Backing up SQL Server in a SharePoint Server 2010 environment on page 36. b. Under the General tab: In the Group list, select the group that you created in step 4. In the Save set field, specify APPLICATIONS:\Microsoft Office SharePoint Services. c. Select the Apps & Modules tab. d. In the Backup command field, specify nsrsnap_vss_save. e. Specify other fields according to your requirements. f. Click OK. 6. Perform the backup. 38 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

39 Bare Metal Recovery of Microsoft SharePoint Server Backing up web front-end server 2 BMR of SharePoint Server 2013 or 2010 To perform the BMR backup of web front-end server 2, perform step 1 through step 6 in Backing up web front-end server 1 on page 38. The following sections describe the recovery procedures for SQL Server, web front-end server 1, and web front-end server 2. Recovering SQL Server in a SharePoint 2010 environment Recovering the web front-end servers To perform BMR of SQL Server in a SharePoint environment: 1. Perform the procedures that are mentioned in the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.1 SP1 Administration Guide. 2. After SQL Server restarts, do the following: a. Start the NMM GUI. b. Select the server, and click Recover. c. In the APPLICATIONS save set, select SqlServerWriter. d. Perform the recovery. e. Restart the machine if prompted. f. Start the SQL Server service, and verify whether all instances are running. To perform the BMR of web front-end servers: 1. Perform the procedures that are mentioned in the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.1 SP1 Administration Guide. 2. After web front-end server restarts, do the following: a. Start the NMM GUI. b. Select the server, and click Recover to recover the SharePoint configuration data. Recover any other backed up file system drives by using the NetWorker client. Ensure that the DISASTER_RECOVERY:\ save set is visible in the NetWorker client UI. c. Restart the machine if prompted. d. In the APPLICATIONS save set, select the SharePoint save sets, and perform the recovery. e. Restart the machine if prompted. SharePoint Server 2013 and

40 Bare Metal Recovery of Microsoft SharePoint Server SharePoint Server 2007 This section provides BMR backup and recovery procedures for SharePoint Server NMM 3.0 SP1 does not support BMR backup and recovery of SharePoint 2007 standalone server with SQL embedded. Backing up SharePoint Server 2007 for BMR Configuring a SharePoint Server client resource To back up SharePoint Server 2007 for BMR, first you should configure a SharePoint Server client resource. You can create a client resource by using the NetWorker Administrator program. The procedures use the following SharePoint Server 2007 configuration on Windows 2008 R2: The target machine is configured with four processors and 8 GB of RAM. The environment is configured with a single NIC. Windows 2008 R2 SP1 and updates are installed on the C:\ drive. The snapshot policy is 1\0\day\All (RolloverOnly policy). The NetWorker client performs the BMR backup by using non-snapshot. The NMM client backs up the following save sets by using the VSS writer based snapshot: APPLICATIONS:\Microsoft Office SharePoint Services APPLICATIONS:\SQLServerWriter To back up SharePoint Server 2007 for BMR: 1. Create a backup group for the SharePoint Server: a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. The backup group is created. d. Right-click the backup group and select Properties. The Group Properties - <backup group name> dialog box appears. Select the Snapshot option. In the Snapshot Policy field, specify either 11dayAll or 10dayAll. e. Specify other fields according to your requirements. 40 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

41 Bare Metal Recovery of Microsoft SharePoint Server f. Click OK. 2. Create a client resource to back up the APPLICATIONS:\Microsoft Office SharePoint Services save set: a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the client resource. c. Click OK. The client resource is created. d. Right-click the client and select Properties. The Client Properties dialog box appears. e. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify APPLICATIONS:\Microsoft Office SharePoint Services. f. Specify other fields according to your requirements. g. Click OK. 3. Perform the backup on all machines in the SharePoint environment. 4. Create a client resource to back up the APPLICATIONS:\SqlServerWriter save set: a. Perform step a through step d of step 2. b. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify APPLICATIONS:\SqlServerWriter. c. Specify other fields according to your requirements. d. Click OK. 5. Perform the backup on all machines in the SharePoint environment. 6. Create a client resource to back up a non-critical volume: a. Perform step a through step d of step 2. b. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify a volume other than critical volumes, for example, D:\. c. Specify other fields according to your requirements. d. Click OK. 7. Perform the backup on all machines in the SharePoint environment. SharePoint Server

42 Bare Metal Recovery of Microsoft SharePoint Server 8. Create a client resource to back up the DISASTER_RECOVERY:\ save set: a. Perform step a through step d of step 2. b. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify DISASTER_RECOVERY:\. c. Specify other fields according to your requirements. d. Click OK. BMR of SharePoint Server Perform the backup on all machines in the SharePoint environment. To perform the BMR of SharePoint Server 2007: 1. Perform the procedures that are mentioned in the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.1 SP1 Administration Guide. 2. After the machine restarts, do the following: a. Start the NMM GUI. b. Select the server and click Recover. c. Select the following save sets: APPLICATIONS:\SqlServerWriter APPLICATIONS:\Microsoft Office SharePoint Services d. Perform the recovery. e. Restart the machine if prompted. 42 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

43 CHAPTER 6 Bare Metal Recovery of Microsoft Exchange Server This chapter includes the following sections: Exchange Server Exchange Server Exchange Server Bare Metal Recovery of Microsoft Exchange Server 43

44 Bare Metal Recovery of Microsoft Exchange Server Exchange Server 2013 This section provides BMR backup and recovery procedures for Exchange Server Backing up Exchange Server 2013 for BMR Configuring an Exchange Server client resource To back up Exchange Server 2013 for BMR, first you should configure an Exchange Server client resource. You can create a client resource: By using the Client Configuration Wizard on page 44 By using the NetWorker Administrator program on page 44 By using the Client Configuration Wizard You should separately create a client resource for backing up the application data and the file system data which includes the DISASTER_RECOVERY: save set. Creating a client resource for backing up the application data The Create a client resource using the Client Configuration Wizard section in the NetWorker Module for Microsoft for Exchange Server VSS Release 3.0 SP1 User Guide provides information about creating a client resource for backing up the application data. Creating a client resource for backing up the file system data Creating a client resource for backing up the file system data on page 24 provides information about creating a client resource for backing up the file system data. By using the NetWorker Administrator program Figure 5 on page 44 illustrates the sample configuration that is used in the procedures. Create two client resources for the Database Availability Group (DAG) node as shown in Figure 5 on page 44. One client resource is used for backing up the system data (critical volumes) and the other is used for backing up the application data (non-critical volumes). Figure 5 Sample configuration for BMR backups of Exchange Server 2013 To back up Exchange Server 2013 for BMR: 1. Create a backup group for system backup: a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. 44 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

45 Bare Metal Recovery of Microsoft Exchange Server c. Click OK. The backup group is created. d. Right-click the backup group and select Properties. The Group Properties - <backup group name> dialog box appears. e. Do not select the Snapshot option. f. Select the appropriate Snapshot Policy and Snapshot Pool from the respective lists. g. Specify other fields according to your requirements. h. Click OK. 2. Create a client resource for system backup: a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the client resource. c. Click OK. The client resource is created. d. Right-click the client and select Properties. The Client Properties dialog box appears. e. Under the General tab: In the Group list, select the group that you created for system backup. In the Save set field, specify All. f. Under the Apps & Modules tab, ensure that the Backup command and Application information fields are empty. g. Specify other fields according to your requirements. h. Click OK. 3. Back up the system data. 4. Ensure that the backup successfully completes. 5. Create a backup group for application backup: a. Perform step a through step d of step 1. b. Select the Snapshot option. c. Select the appropriate Snapshot Policy and Snapshot Pool from the respective lists. d. Specify other fields according to your requirements. e. Click OK. Exchange Server

46 Bare Metal Recovery of Microsoft Exchange Server 6. Create a client resource for application backup: a. Perform step a through step d of step 2. b. Under the General tab: In the Group list, select the group that you created for application backup. In the Save set field, specify the save set. For example, APPLICATIONS:\Microsoft Exchange c. Select the Apps & Modules tab. In the Backup command field, specify nsrsnap_vss_save. In the Application information field, specify the following: NSR_SNAP_TYPE=vss NSR_ALT_PATH=<C:\Temp location> NSR_EXCH2010_BACKUP=<Active/Passive/All > or NSR_EXCH_BACKUP=<Active/Passive/All > NSR_EXCH2010_DAG=<Dag Client Instance> or NSR_EXCH_DAG=<Dag Client Instance> d. Specify other fields according to your requirements. e. Click OK. BMR of Exchange Server Back up the application data. 8. Ensure that the backup successfully completes. To perform BMR of Exchange Server 2013: 1. Perform the procedures that are mentioned in the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.1 SP1 Administration Guide. 2. If Exchange Server 2013 is installed on a drive other than the system drive, use the NetWorker client to recover the drive. During the recovery, if the Naming Conflict dialog box appears as shown in Figure 6 on page 47, select Rename the Recover File and click OK. 46 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

47 Bare Metal Recovery of Microsoft Exchange Server Exchange Server 2010 Figure 6 Naming conflict 3. After the recovery is completed, restart the machine to start all the Exchange services. 4. After the machine restarts, ensure that you have: a. Properly restored all the critical volumes. b. Created all non-critical volumes with the exact drive letters that were assigned before the disaster. c. Selected a database and performed recovery. d. Successfully mounted the database after the recovery, and checked whether all s are successfully recovered. If the database is not mounted, run the following command to mount it: mount-database -identity <database name> -force This section provides BMR backup and recovery procedures for Exchange Server Backing up Exchange Server 2010 for BMR Configuring an Exchange Server client resource To back up Exchange Server 2010 for BMR, first you should configure an Exchange Server client resource. You can create a client resource: By using the Client Configuration Wizard on page 48 By using the NetWorker Administrator program on page 48 Exchange Server

48 Bare Metal Recovery of Microsoft Exchange Server By using the Client Configuration Wizard Perform the procedures described in By using the Client Configuration Wizard on page 44. By using the NetWorker Administrator program Figure 7 on page 48 illustrates the sample configuration that is used in the procedures. Create two client resources for the Database Availability Group (DAG) node as shown in Figure 7 on page 48. One client resource is used for backing up the system data (critical volumes) and the other is used for backing up the application data (non-critical volumes). Figure 7 Sample configuration for BMR backups of Exchange Server 2010 To back up Exchange Server 2010 for BMR: 1. Create a backup group for system backup: a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. The backup group is created. d. Right-click the backup group and select Properties. The Group Properties - <backup group name> dialog box appears. e. Do not select the Snapshot option. f. Select the appropriate Snapshot Policy and Snapshot Pool from the respective lists. g. Specify other fields according to your requirements. h. Click OK. 2. Create a client resource for system backup: a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the client resource. c. Click OK. The client resource is created. 48 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

49 Bare Metal Recovery of Microsoft Exchange Server d. Right-click the client and select Properties. The Client Properties dialog box appears. e. Under the General tab: In the Group list, select the group that you created for system backup. In the Save set field, specify DISASTER_RECOVERY:\. If Exchange Server 2010 is installed on a drive other than the system drive on Windows Server 2012, specify the drive letter also. For example, E:\. f. Under the Apps & Modules tab, ensure that the Backup command and Application information fields are empty. g. Specify other fields according to your requirements. h. Click OK. 3. Back up the system data. 4. Ensure that the backup successfully completes. 5. Create a backup group for application backup: a. Perform step a through step d of step 1. b. Select the Snapshot option. c. Select the appropriate Snapshot Policy and Snapshot Pool from the respective lists. d. Specify other fields according to your requirements. e. Click OK. 6. Create a client resource for application backup: a. Perform step a through step d of step 2. b. Under the General tab: In the Group list, select the group that you created for application backup. In the Save set field, specify the save set. For example, APPLICATIONS:\Microsoft Exchange c. Select the Apps & Modules tab. In the Backup command field, specify nsrsnap_vss_save. In the Application information field, specify the following: NSR_SNAP_TYPE=vss NSR_ALT_PATH=<C:\Temp location> NSR_EXCH2010_BACKUP=<Active / Passive / All > NSR_EXCH2010_DAG=<Dag Client Instance> d. Specify other fields according to your requirements. e. Click OK. Exchange Server

50 Bare Metal Recovery of Microsoft Exchange Server BMR of Exchange Server 2010 Exchange Server Back up the application data. 8. Ensure that the backup successfully completes. To perform BMR of Exchange Server 2010: 1. Perform the procedures that are mentioned in the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.1 SP1 Administration Guide. 2. After the machine restarts, ensure that you have: a. Properly restored all the critical volumes. b. Created all non-critical volumes with the exact drive letters that were assigned before the disaster. c. Selected a database and performed recovery. d. Successfully mounted the database after the recovery, and checked whether all s are successfully recovered. If the database is not mounted, manually mount it by running the following command: mount-database -identity <database name> -force This section provides BMR backup and recovery procedures for Exchange Server Backing up Exchange Server 2007 for BMR Configuring an Exchange Server client resource To back up Exchange Server 2007 for BMR, first you should configure an Exchange Server client resource. You can create a client resource: By using the Client Configuration Wizard on page 50 By using the NetWorker Administrator program on page 50 By using the Client Configuration Wizard Perform the procedures described in By using the Client Configuration Wizard on page 44. By using the NetWorker Administrator program Figure 8 on page 51 illustrates the sample CCR configuration that is used in the procedures. 50 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

51 Bare Metal Recovery of Microsoft Exchange Server Figure 8 Sample configuration for BMR backups of Exchange Server 2007 SP3 Rollup5 In this sample configuration: The client instance Exchnode2 is a physical node. The Exchange Virtual Server instance Exch2k7Virtual is active on the Exchnode2 physical node. The client instance Exchnode1 is a passive node. To back up Exchange Server 2007 for BMR: 1. Create a backup group to back up critical volumes on the active node: a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. The backup group is created. d. Right-click the backup group and select Properties. The Group Properties - <backup group name> dialog box appears. e. Do not select the Snapshot option. f. Select the appropriate Snapshot Policy and Snapshot Pool from the respective lists. g. Specify other fields according to your requirements. h. Click OK. 2. Create a client resource for the backup group to back up critical volumes on the active node: a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the client resource. c. Click OK. The client resource is created. d. Right-click the client and select Properties. The Client Properties dialog box appears. Exchange Server

52 Bare Metal Recovery of Microsoft Exchange Server e. Under the General tab. In the Group list, select the group that you created to back up critical volumes on the active node. In the Save set field, specify DISASTER_RECOVERY:\. f. Specify other fields according to your requirements. g. Click OK. 3. Perform the backup. 4. Perform step 1 to create a backup group to back up critical volumes on the passive node. 5. Perform step 2 to create a client resource for the backup group to back up critical volumes on the passive node. 6. Perform the backup. 7. Create a backup group for the Exchange virtual server instance to perform Exchange Server 2007 Writer-Level backups on the active node client instance. a. Perform step a through step d of step 1. b. Select the Snapshot option. c. Specify other fields according to your requirements. d. Click OK. 8. Create the Exchange virtual server active node client instance: a. Perform step a through step d of step 2. b. Under the General tab. In the Group list, select the group that you created to back up the Exchange virtual server instance on the active node. In the Save set field, specify Applications:\Microsoft Exchange c. Select the Apps & Modules tab. In the Backup command field, specify nsrsnap_vss_save. In the Application information field, specify the following: NSR_SNAP_TYPE=vss NSR_ALT-Path=C:\RM_MountPOINT NSR_VIRT_SERV=Exch2k7Virtual NSR_INDEX_CLIENT=Exch2k7Virtual d. Specify other fields according to your requirements. e. Click OK. 9. Perform the backup. 52 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

53 Bare Metal Recovery of Microsoft Exchange Server 10. Perform step 7 to create a backup group for the Exchange virtual server instance to perform Exchange Server 2007 Writer-Level backups on the passive node client instance. 11. Create the Exchange virtual server passive node client instance: a. Perform step a and step b of step 8. b. Select the Apps & Modules tab. In the Backup command field, specify nsrsnap_vss_save. In the Application information field, specify the following: NSR_SNAP_TYPE=vss NSR_ALT-Path=C:\RM_MountPOINT c. Specify other fields according to your requirements. d. Click OK. 12. Perform the backup. BMR of Exchange Server 2007 To perform BMR of Exchange Server 2007: 1. Perform the procedures that are mentioned in the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.1 SP1 Administration Guide for the passive node client machine. Repeat these steps for the active node client machine. 2. After both the machines restart, do the following: a. Create partitions, and provide the same drive letters to the non-critical volumes where Exchange logs and databases existed. b. On the current active node, start the NMM GUI. c. Go to Recover > Exchange Recover Session > Database Recover. If the database is not mounted, manually mount it by running the following command: mount-database -identity <database name> -force d. Select the storage groups, and perform the conventional point-in-time recovery to bring the Exchange storage groups back online. The NetWorker Module for Microsoft Release 3.0 SP1 Administration Guide provides information on conventional point-in-time recovery. Exchange Server

54 Bare Metal Recovery of Microsoft Exchange Server 54 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

55 CHAPTER 7 Bare Metal Recovery of Microsoft Hyper-V This chapter includes the following section: Hyper-V Bare Metal Recovery of Microsoft Hyper-V 55

56 Bare Metal Recovery of Microsoft Hyper-V Hyper-V Backing up Hyper-V for BMR Configuring an Hyper-V client resource This section provides BMR backup and recovery procedures for Hyper-V CSV and non-csv. To back up Hyper-V for BMR, first you should configure a Hyper-V client resource. You can create a client resource: By using the Client Configuration Wizard on page 56 By using the NetWorker Administrator program on page 56 By using the Client Configuration Wizard You should separately create a client resource for backing up the application data and the file system data which includes the DISASTER_RECOVERY: save set. Creating a client resource for backing up the application data The By using the Client Configuration Wizard section in the NetWorker Module for Microsoft for Hyper-V VSS Release 3.0 SP1 User Guide provides information about creating a client resource for backing up the application data. Creating a client resource for backing up the file system data Creating a client resource for backing up the file system data on page 24 provides information about creating a client resource for backing up the file system data. By using the NetWorker Administrator program The procedures use the following sample Hyper-V configuration on a Windows server: Physical Node1: nmm-csv-node1 Physical Node2: nmm-csv-node2 Virtual Server: nmm-csv-cluster To back up Hyper-V for BMR: 1. Create a backup group for Hyper-V: a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. The backup group is created. 56 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

57 Bare Metal Recovery of Microsoft Hyper-V 2. Create a client resource to backup the Hyper-V application data that is hosted in the non-csv volumes: a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the physical node. c. Click OK. The client resource is created. d. Right-click the client and select Properties. The Client Properties dialog box appears. e. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify APPLICATIONS:\Microsoft Hyper-V. f. Specify other fields according to your requirements. g. Click OK. 3. Perform the backup on all Hyper-V cluster nodes. 4. Create a client resource to backup the Hyper-V application data that is hosted in the CSV volumes: a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the virtual node. c. Click OK. The client resource is created. d. Right-click the client, and select Properties. The Client Properties dialog box appears. e. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify APPLICATIONS:\Microsoft Hyper-V. f. Specify other fields according to your requirements. g. Click OK. 5. Perform the backup. Only the virtual machines that are hosted in the CSV that is registered in the Cluster Manager are backed up. Hyper-V 57

58 Bare Metal Recovery of Microsoft Hyper-V BMR of Hyper-V 6. Create a client resource to backup the non-critical volumes: a. Perform step a through step d of step 2. b. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify a volume other than critical volumes, for example, D:\. c. Specify other fields according to your requirements. d. Click OK. 7. Perform the backup on all Hyper-V cluster nodes. 8. Create a client resource to backup the All save set: a. Perform step a through step d of step 2. b. Under the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify All. c. Specify other fields according to your requirements. d. Click OK. 9. Perform the backup on all Hyper-V cluster nodes. To perform the BMR of Hyper-V: 1. Perform the procedures that are mentioned in the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.1 SP1 Administration Guide. After the recovery, you observe the following: The status of Hyper-V VMs are either Pending or Failed, as shown in Figure 9 on page 58. Figure 9 Status of Hyper-V VMs in Failover Cluster Manager The quorum, CSV, and non-csv volumes appear as shown in Figure 10 on page 59, but no disks are associated to them. 58 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

59 Bare Metal Recovery of Microsoft Hyper-V Figure 10 Storage details in Failover Cluster Manager 2. Reconfigure quorum and cluster storage (CSV and non-csv volumes) as shown in Figure 11 on page 60: a. Create or configure the quorum, CSV and non-csv shared volumes. b. Ensure that the drive letters for quorum and non-csv (shared volume) are documented and used here. c. Ensure that the CSV volume name is also configured the same as the original. Hyper-V 59

60 Bare Metal Recovery of Microsoft Hyper-V Figure 11 Reconfiguring quorum and cluster storage From Figure 11 on page 60: Q:\ drive is configured for quorum. H:\ drive is a shared cluster disk and hosts the non-csv volume. Cluster disk-1 and Cluster disk-2 are configured as CSV volumes. 3. Recover all Hyper-V cluster nodes by using the NMM client. 4. Reconfigure the VMs with the Pending or Failed status. 5. Recover the Hyper-V VMs that are hosted in the CSV volumes as shown in Figure 12 on page 60 with the virtual node as the client resource, by using the NMM client. Figure 12 Recovering VMs in CSV volumes 6. Recover the Hyper-V VMs that are hosted in the non-csv volumes as shown in Figure 13 on page 61 with the physical node as the client resource, by using the NMM client. 60 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 SP1 User Guide

61 Bare Metal Recovery of Microsoft Hyper-V Figure 13 Recovering VMs in non-csv volumes Hyper-V 61