FMD-3200/FMD-3200-BB/FMD-3300
|
|
- Gabriella Norton
- 5 years ago
- Views:
Transcription
1 Operator's Guide The purpose of this guide is to provide the basic operation for this equipment. For more detailed information, see the Operator's Manual. FMD-3200/FMD-3200-BB/FMD-3300 All brand and product names are trademarks, registered trademarks or service marks of their respective holders. ECDIS English Controls The system can be operated with the controls or the trackball module. The procedures in this operator s guide use the trackball module. Alert status LED The color and state of the LED change according to alert status. - Green, lighting: Normal operation status; no alerts generated. - Red, flashing: Alert generated (not acknowledged). - Red, lighting: Alert generated and acknowledged. BRILL knob Rotate: Adjust brilliance of FURUNO monitor. Push: Select display palette. A/C RAIN, A/C SEA knob No use. GAIN knob Adjust the gain of the radar picture. VRM rotary encoder Adjust active VRM. VRM 1: Activate, deactivate VRM1. VRM 2: Activate, deactivate VRM2. POWER switch Turn the system on/off. (This control does not switch the monitor on/off.) USB port Connect USB flash memory. EBL rotary encoder Adjust active EBL. EBL 1: Activate, deactivate EBL1. EBL 2: Activate, deactivate EBL2. Trackball module Operates like a PC mouse. VIEW/HIDE key Show/hide the Instant Access Bar and Route Information box. ALARM ACK key Alert acknowledgement for alerts generated by chart, navigation, etc. ACQ key Activate cursor-selected sleeping AIS target. Instant Access knob Access functions on the Instant Access Bar. - Rotate: Select item. - Push: Confirm selection. ESC key Go back one step in the current sequence. TARGET DATA key Display the detailed target data for selected TT, AIS target. Keyboard A keyboard for entering alphanumeric data. MFD key Toggle ECDIS and Conning modes. UNDO key RANGE key Undo the last operation, when Select the chart creating a route and user chart. scale. TARGET CANCEL key Sleep cursor-selected AIS target.
2 Display Layout Status Bar (See page 3.) Instant Access Bar (See page 4.) Chart scale, presentation mode box Cursor position box Sensor information box Upper section Electronic chart area Own ship functions box Route information box Overlay/NAV Tools box (See page 11.) Lower section Alert box EBL1 box, EBL2 box Permanent warnings box VRM1 box, VRM2 box 2
3 Status Bar Status Bar OTHERS: Play back log. PLAN: Select the Voyage planning mode. CHARTS: Select the Chart maintenance mode. NAVI: Select the Voyage navigation mode. Operating mode: Select the ECDIS mode, ECDIS or Conning. How to open a drop-down list Chart format: Select chart format, vector or raster. User settings: - Show the Settings menu. - Manage profiles. Spinner: Rotates clockwise if the system is working properly. Time: Time (local or UTC) STD DISP: Restore IMO standard display. Display the operator's manual, ECDIS program no. and system information. Date: Display the date; select the time to use, local or UTC. Drop-down list CHART ONLY: Show only the chart, when left button is pressed and held down. Chart database: Select the pre-defined presentations of ENC content: IMO BASE, IMO STD or IMO ALL. 3
4 Instant Access Bar Upper section (by operating mode) Lower section Voyage navigation mode MSG: Open the AIS/NAVTEX message menu window to process AIS/NAVTEX messages. Select: Open route selection menu window to select the route to follow. Unselect: Stop following a route. Move to Plan: Transfer route to Voyage planning mode to edit route. License: Show chart viewing date setup window. Route INFO: Find details about route. Manual Update: Open the manual update menu window to insert chart update symbols manually. Chart maintenance mode Auto Load: Start automatic installation of the chart data (CD or DVD ROM). Manage Charts: Manage chart cells (grouping, deleting, etc.). Cell Status: Show the chart catalog to get info about charts installed in the system. License: Show chart viewing date setup window. Public Key: Open public key management window. SET: Show setting windows for chart, symbol, user chart. TWO DISP: Split screen int two, horizontally or vertically. AIO: Display Admiralty Information Overlay. Show software keyboard. Mini conning: Show and hide the mini conning display, available in the Voyage navigation a Planning navigation modes. Chart Legend: Find data about current chart. Viewing Dates: Set display date and approved until dates. Chart 1: Show overview of ECDIS chart symbols. Voyage planning mode Report: See route reports on waypoints and passage plan as well as user chart reports. Route: Create a route (see page 5). User Chart: Creat a user chart (see page 7). Select a color palette. Record buttons: Record user/position events to the event log; access various logs. Adjust display brilliance. Guide Box: A guide box instantly tells the operators the range and bearing between the last waypoint and the cursor position as you drag the cursor. MOB: Mark man overboard position. Take a screenshot. Manage Data: Delete routes and user charts. Undo past action. 4
5 Routes How to create a route PLAN Plan -ning Route New Waypoint WPT NM WPT6 WPT1 Continue adding positions. Right click after inserting final waypoint; select [Finish]. WPT NM WPT NM WPT NM WPT NM Save as Enter name OK Left-click a position to mark a waypoint. 5
6 Routes (con t.) How to select a route to navigate Select Route Select Route Route32 AAAAAA Route67 Name Date 12 Aug Apr Sep 2011 Name Route32 RouteAAAAAA Route67 Date 12 Aug Apr Sep 2011 Select a route. Selected. To stop navigating a route: Select [Route]. Total WPTs : 42 Total DIST : 7736 NM NAVI Route Unselect Start WPT : N W Final WPT : N E Cancel OK Cancel OK How to view route waypoint information Route Route INFO [Waypoints]. How to delete a route PLAN Manage Data Route Check route(s) to delete. Delete 6
7 User Charts How to create a user chart User Chart Plan -ning PLAN New Right click to open options How to draw a line Tidal: - Current - Predicted Area Line: - Coast - Route - NAV - Depth Tidal: - NMT - NLT Label (1) (4) Right-click; select [Finish]. Drag cursor; double-click. object to draw. Enter name Save as OK 7 How to draw an area (1) (3) (2) Circle How to draw a circle (2) (3) Right-click; select [Finish].
8 User Charts(con t) How to select objects to display in user chart DISP How to link a user chart to a route Symbol DISP SET PLAN Plan -ning Route Selected. [Select.] Select [Mariner] tab. RouteAAAAAA [User Chart] tab. Check an item. Select a user chart. How to delete objects from a user chart Point on a line Point, symbol, tidal or circle Edit Delete Edit DeletePoint Select [DeletePoint]. Select [Delete]. Right- click Right- click the point to delete. How to delete user charts PLAN Manage Data User Chart Delete Check chart(s) to delete. 8
9 Chart Operations How to control visibility of chart objects Basic Setting Control basic chart settings DISP SET Chart DISP Control chart objects Symbol DISP Control navigational features 9
10 Chart Operations How to set safety contours and chart alerts How to set Display date and Approved until dates DISP SET Chart Alert Chart INFO Viewing Dates Approve All to put checkmark; red ( ): Highlight+Warning yellow ( ): Caution Set safety depths here. How to find chart object information (ENC chart) Ship off center Object INFO Manual Update Select [Object INFO.] Select an object. OK Right-click How to manually insert a new chart object Select object from Drawing type. NAVI Manual Updates Select [Planning]. Add Commit object to add. 10
11 TT/AIS Operations How to find target info Put the cursor on the target and push the left button to show target data. Title bar TT No. Bearing Range Course over ground Speed over ground CPA TCPA Bow cross range Bow cross time **.** **.** TT symbols (main) Symbol (Color) (Green) (Green) (Green) Name Past position marker Target under acquisition Acquired target Title bar MMSI Bearing Range Course over ground Speed over ground CPA TCPA Bow cross range Bow cross time Position Scroll buttons Heading Rate of turn Navigation status AIS symbols (main) Symbol Name (Color) Past position marker (Green) Sleeping AIS target (Green) Activated AIS (Green) target How to set up TT and AIS on the TT/AIS page in Overlay/NAV Tools box Show, hide AIS display. Vector Show, hide TT display. Set vector time. Select vector reference. (ex. TT) Set CPA/TCPA alarm. Set lost target alarm. Set conditions for automatic activation of AIS targets whose CPA is within CPA/TCPA setting. (ex. AIS) Select reference for past position display. Show, hide position display. 11
12 TT/AIS Operations (con t) Radar Overlay Activate, deactivate the radar overlay. Filter AIS targets by target category. Filter AIS targets by range and speed, length. Sleep all activated AIS targets. Adjust the gain of the radar receiver. Put the cursor on the bar then roll the scrollwheel. Set the degree of transparency for the overlay. Set the item to display when a chart object and a radar echo share the same position. Set conditions to activate an AIS target when its CPA is within the CPA alarm setting. Select the antenna to feed the overlay. Radar echo Set the conditions for the AIS lost target filter. Set the conditions for the TT lost target filter. 12 PUB. NO. OSE A (1204, DAMI) FMD-3200/3200-BB/3300
Operator's Guide FMD-3200/FMD-3200-BB/FMD-3300
Electronic Chart Display and Information System (ECDIS) English Model Operator's Guide FMD-3200/FMD-3200-BB/FMD-3300 The purpose of this guide is to provide the basic operation for this equipment. For
More informationOPERATOR'S MANUAL FMD-3200 FMD-3200-BB FMD Electronic Chart Display and Information System (ECDIS) MODEL.
OPERATOR'S MANUAL Electronic Chart Display and Information System (ECDIS) MODEL FMD-3200 FMD-3200-BB FMD-3300 www.furuno.com The paper used in this manual is elemental chlorine free. FURUNO Authorized
More informationOPERATOR'S MANUAL. Electronic Chart Display and Information System (ECDIS) FMD-3200 FMD-3200-BB FMD Model.
OPERATOR'S MANUAL Electronic Chart Display and Information System (ECDIS) Model FMD-3200 FMD-3200-BB FMD-3300 www.furuno.com The paper used in this manual is elemental chlorine free. FURUNO Authorized
More informationMULTI FUNCTION DISPLAY MFD8/MFD12
MULTI FUNCTION DISPLAY MFD8/MFD12 User's Handbook The purpose of this guide is to provide the basic operation for this equipment. For more detailed information, see the Operator's manual. All brand and
More informationOPERATOR'S MANUAL ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM (ECDIS) FMD Model.
OPERATOR'S MANUAL ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM (ECDIS) Model FMD-3100 www.furuno.com The paper used in this manual is elemental chlorine free. FURUNO Authorized Distributor/Dealer 9-52
More informationÕppeainete loend, maht ja ainekava
Page Page 2 of 21 Õppeainete loend, maht ja ainekava Käesolev koolitus viiakse läbi STCW Konventsiooni Reegel I/14 paragrahv 1.5, ISM Koodeksi paragrahv 6.3 ja 6.5, ning STCW.7/Circ.18 (22 mai 2012) alusel.
More informationTZTL12F/TZTL15F/TZT2BB Operator s Guide
Operational Overview Home icon, power switch operations TZTL12F/TZTL15F Model MULTI FUNCTI DISPLAY TZTL12F/TZTL15F/TZT2BB Operator s Guide This guide provides the basic operating procedures for this equipment.
More informationOPERATOR'S MANUAL. FURUNO FINLAND Sea Traffic Management. Furuno Finland Oy.
OPERATOR'S MANUAL FURUNO FINLAND Sea Traffic Management www.furuno.fi Furuno Finland Oy Contents 1. Sea Traffic Management System, STM... 3 1.1 General... 3 1.2 Acronyms... 4 1.3 Color coding... 5 1.2.1
More informationGN70/MX610/MX612 QuickStart Guide
GN70/MX610/MX612 QuickStart Guide EN The front panel 1 2 3 PAGE MENU 8 10 POS NAV 9 HDG AIS 11 4 5 6 ESC MOB 7 ENT USB 12 13 USB No. Description 1 PAGE key: Brings up different screen page every time this
More informationMaris ECDIS900 System. Operator Manual ENGLISH.
Maris ECDIS900 System Operator Manual ENGLISH http://www.navico-commercial.com/ Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product
More informationBoating Tip #45: Chartplotters
Boating Tip #45: Chartplotters As navigation technology has advanced, hand held GPS receivers have further evolved into chartplotters. Chartplotters graphically display a vessel s position, heading and
More informationFeature Guide: TECDIS 4.7.x.30
Feature Guide: TECDIS 4.7.x.30 With the release of TECDIS 4.7.x.30 we are providing you with over 40 new features and bug fixes. The most noticeable changes in this release are the design changes to make
More informationVIDEO PLOTTER RP-250
VIDEO PLOTTER RP-250 Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : 0798-65-2111 fax : 0798-65-4200 ( DAMI All rights reserved. PUB.No. OME-30470 ) RP-250 Printed in Japan FIRST
More informationVIDEO PLOTTER RP-250
VIDEO PLOTTER RP-250 Back Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : 0798-65-2 fax 0798-65-4200 : All rights reserved. Printed in Japan FIRST EDITION : AUG. 2002 G PUB.No.
More informationJAN-7201S/9201S ECDIS
ECDIS RMS * The photograph includes options. - Provide a smooth operating environment ensured by high-speed chart drawing. Conforming to the latest IMO performance standards with Marine Equipment Directive
More informationGLOBE-AIS Overview. AIS In GLOBE. GLOBE-AIS module basics
GLOBE-AIS Overview AIS In GLOBE The AIS module for GLOBE allows you to take the information from the AIS hardware and display it on GLOBE electronic charts. The module allows easy access to the information
More informationNew Remote Control Unit
Model: MCU004 New Remote Control Unit 1. Specifications 1-1 Standard Comprising 1-2 Technical Specifications 2. Operation User Interface 2-1 Getting Started NavNet TZtouch/2 2-2 Keys and Functions Basic
More informationVIDEO PLOTTER RP-180.
VIDEO PLOTTER RP-180 www.furuno.co.jp The paper used in this manual is elemental chlorine free. FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111
More informationRESOLUTION MSC.191(79) (adopted on 6 December 2004) PERFORMANCE STANDARDS FOR THE PRESENTATION OF NAVIGATION-RELATED INFORMATION ON SHIPBORNE
MSC 79/23/Add.2 RESOLUTION MSC.191(79) THE MARITIME SAFETY COMMITTEE, RECALLING Article 28(b) of the Convention on the International Maritime Organization concerning the functions of the Committee, RECALLING
More informationUsing the ADMIRALTY Vector Chart Service with Furuno ECDIS
Using the ADMIRALTY Vector Chart Service with Furuno ECDIS This guide is based on the FURUNO FEA 2107/2807 Series ECDIS The guide should be used in conjunction with the AVCS User Guide, as well as the
More information4: Yamaha Page 4.1 Quarter Screen
New Software v6.21 Including compatibility with BBWX4 SiriusXM Weather Receiver, FLIR Model M132/232 Cameras, FAR2xx7, FAR15x3 and FAR15x8 Radars, and Fusion Audio Models 755 and Apollo 1: Key Brand New
More informationSpecifications: TECDIS 2728
Specifications: TECDIS 2728 TECDIS 2728 is an all-in one ECDIS computer. It is type-approved according to IMO regulations, allowing paperless navigation 1. The integrated design makes it perfect for retrofit
More informationFeature Guide: TECDIS 4.7.x.31
Feature Guide: TECDIS 4.7.x.31 Creators of TECDIS With the release of TECDIS 4.7.x.31 we are providing you with a few bug fixes and stability improvements. For a complete list of changes, see the release
More informationMFDBB Multi Function Display
MFDBB Multi Function Display www.furuno.co.jp Important Notices The descriptions in this manual are intended for readers with a solid knowledge of English. No part of this manual may be copied or reproduced
More informationFICE-100 Ice Radar FOIL-200 Oil Radar
FICE-100 Ice Radar FOIL-200 Oil Radar OPERATORS MANUAL Furuno Finland Oy www.furuno.fi TABLE OF CONTENTS FOREWORD 4 FICE-100 5 SYSTEM CONFIGURATION 6 1. GRAPHICAL USER INTERFACE (GUI) 7 1.1 Operating mode
More informationGO XSE. Getting Started. ENGLISH
GO XSE Getting Started ENGLISH www.simrad-yachting.com Contents 6 Introduction 6 The Home page 7 Application pages 9 Basic operation 9 System Controls dialog 9 Turning the system on and off 10 Selecting
More informationSpecifications: TECDIS 2424
Specifications: TECDIS 2424 TECDIS 2424 is an all-in one ECDIS computer. It is type-approved according to IMO regulations, allowing paperless navigation 1. The integrated design makes it perfect for retrofit
More informationOPERATOR MANUAL. SIMRAD CS68 ECDIS Chart System
OPERATOR MANUAL SIMRAD CS68 ECDIS Chart System 20221925E English About this document Rev Date Written by Checked by Approved by A B C D E 070205 First issue. Applies to software version 1.1.xx. 301105
More informationQuick Reference Guide
Quick Reference Guide Zeus MFDs 2 4 6 5 7 8 10 1 11 CHART RADAR ECHO NAV INFO EN IN OUT 1MOB 2 ABC 4 GHI DEF 5 JKL 6 MNO 7 PQRS 8 TUV 9WXYZ STBY AUTO 0 9 12 1 PAGES 1 Direct Access Keys (DAK). Provide
More informationVulcan. Getting Started ENGLISH. bandg.com
Vulcan Getting Started ENGLISH bandg.com Vulcan Getting Started 3 4 Vulcan Getting Started Contents 9 Introduction 9 The Home page 10 Application pages 11 Integration of 3 rd party devices 12 GoFree wireless
More informationUsing the ADMIRALTY Vector Chart Service with Furuno ECDIS. This guide is based on the FURUNO 3000 Series ECDIS
Using the ADMIRALTY Vector Chart Service with Furuno ECDIS This guide is based on the FURUNO 3000 Series ECDIS Furuno FMD 3000 User Guide V1.1 2 1 Introduction 3 2 Data Management 4 3 The User Permit Number
More informationUsing the ADMIRALTY Vector Chart Service with the JRC ECDIS JAN-7201/9201
Using the ADMIRALTY Vector Chart Service with the JRC ECDIS JAN-701/901 This guide is based on JRC ECDIS JAN-701/901 Version 01.0.06 The guide should be used in conjunction with the AVCS User Guide, as
More informationSD, SDHC Logos are trademarks of SD-3C, LLC. RotoKey is a registered trademark or trademark of FURUNO Electric Co., Ltd.
IMPORTANT NOTICES General This manual has been authored with simplified grammar, to meet the needs of international users. The operator of this equipment must read and follow the descriptions in this manual.
More informationINSTRUCTION MANUAL SETTING AND ADJUSTMENTS FCR-2119-BB/2129-BB/2139S-BB/ 2819/2829/2839S/2829W/2839SW
INSTRUCTION MANUAL SETTING AND ADJUSTMENTS Model FMD-3200/3200-BB/3300 FCR-2119-BB/2129-BB/2139S-BB/ 2819/2829/2839S/2829W/2839SW This manual is solely for use by the installer. Under no circumstances
More informationZeus 2 QuickStart Guide
Zeus QuickStart Guide Font panel 7 units 9 & units 5 6 4 9 7 4 MARK 5 6 7 7 MARK 8 No. Description Touch screen Rotary knob. Rotate to scroll through menu items, then press to confirm a selection. Rotate
More informationNobeltec TimeZeroTrident v2.1.0
Nobeltec TimeZeroTrident v2.1.0 Table of Contents Welcome... 1 Getting Started... 2 Home Planning Vs Navigation... 2 Home Planning... 2 Navigation... 2 Chart Compatibility... 2 Installing Charts... 3 Chart
More informationTimeZero Navigator 3.2
TimeZero Navigator 3.2 Table of Contents Welcome... 1 Getting Started... 2 Registering TimeZero... 2 Register using the My TIMEZERO Website... 2 Register directly from the Software... 3 Home Planning
More informationCS68 ECDIS Operator Manual ENGLISH
CS68 ECDIS Operator Manual ENGLISH OPERATOR MANUAL SIMRAD CS68 ECDIS Chart System 988-10707-001 English About this document Copyright 2014 Navico Holding AS. All rights reserved. No part of this work covered
More informationOperation Manual. Simrad NSE8 and NSE12 Multi-function Displays. English. A brand by Navico - Leader in Marine Electronics.
Operation Manual Simrad NSE8 and NSE12 Multi-function Displays English www.simrad-yachting.com A brand by Navico - Leader in Marine Electronics Preface Disclaimer As Navico is continuously improving this
More informationSpecifications: TECDIS 2138 B
Specifications: TECDIS 2138 B TECDIS 2138 B is a standalone ECDIS computer. It is type-approved according to IMO regulations, allowing paperless navigation 1. The expandable design makes it a great choice
More informationOPERATOR'S MANUAL COLOR GPS PLOTTER GP-7000 MODEL.
OPERATOR'S MANUAL COLOR GPS PLOTTER MODEL GP-7000 www.furuno.co.jp *00014913412* *00014913412* IMPORTANT NOTICES This manual is intended for use by native speakers of English. No part of this manual may
More informationMARINE RADAR MARINE RADAR
MARINE RADAR State-of-the-art Radar technology "Real-Time Radar" Relax operation and quick indication. a new Radar series from JRC incorporating the latest technology and user features. JRC JMA-5300 series
More informationCOLOR GPS/PLOTTER GP-3500
COLOR GPS/PLOTTER GP-3500 Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : 0798-65-2111 fax : 0798-65-4200 ( HIMA All rights reserved. PUB.No. OME-44210 ) GP-3500 Printed in Japan
More informationExcel 2013 Intermediate
Excel 2013 Intermediate Quick Access Toolbar... 1 Customizing Excel... 2 Keyboard Shortcuts... 2 Navigating the Spreadsheet... 2 Status Bar... 3 Worksheets... 3 Group Column/Row Adjusments... 4 Hiding
More informationTimeZero Professional v3.2
TimeZero Professional v3.2 Table of Contents Welcome... 1 Getting Started... 2 Registering TimeZero... 2 Register using the My TIMEZERO Website... 2 Register directly from the Software... 3 Home Planning
More informationSales Bulletin TZTL12F/15F. New Software v4.01. Model: Attention: All Furuno Distributors/Subsidiaries. SB No: FSB Number of Pages: 10
9-52 Ashihara-cho, Nisinomiya, 662-8580, Japan www.furuno.co.jp Sales Bulletin Attention: All Furuno Distributors/Subsidiaries SB No: FSB16-0023 Number of Pages: 10 Date: November 10, 2016 Model: TZTL12F/15F
More informationHook2 Series. Operator Manual. 5 HDI, 5 TS, 7X GPS TS, 7 HDI, 7 TS, 9 TS, 9 HDI, and 12 TS ENGLISH
Hook2 Series Operator Manual 5 HDI, 5 TS, 7X GPS TS, 7 HDI, 7 TS, 9 TS, 9 HDI, and 12 TS ENGLISH www.lowrance.com Preface Disclaimer As Navico is continuously improving this product, we retain the right
More informationImportant information for AVCS users
Important information for AVCS users Version issued 6 July 2017 This document provides important information for users of AVCS, including general cautions about the use of ENCs within ECDIS. This document
More informationTimeZero Professional v3.0
TimeZero Professional v3.0 Table of Contents Welcome... 1 Getting Started... 2 Home Planning Vs. Navigation... 2 Home Planning... 2 Navigation... 2 Chart Compatibility... 2 Mapmedia.mm3d charts... 2 S57
More informationAIS. HELIX Accessory Guide TABLE OF CONTENTS. Overview... 5 Track AIS Targets... 5 AIS Target Overview... 7 Turn on Alarms... 8
AIS HELIX Accessory Guide 532440-1_A TABLE OF CONTENTS Overview............................................. 5 Track AIS Targets...................................... 5 AIS Target Overview...................................
More informationUAIS DISPLAY SOFTWARE. FAISPC MARK-2 (for FA-150)
UAIS DISPLAY SOFTWARE FAISPC MARK-2 (for FA-150) TABLE OF CONTENTS FOREWORD... iii 1. INSTALLATION... 1 1.1 Requirements... 1 1.2 Software Installation... 2 1.2.1 Installing the hasp device driver... 2
More informationUsing the ADMIRALTY Vector Chart Service with SIMRAD MARIS ECDIS900
Using the ADMIRALTY Vector Chart Service with SIMRAD MARIS ECDIS900 This guide is based on Simrad MARIS ECDIS900 4.9.0.39 The guide should be used in conjunction with the AVCS User Guide, as well as the
More informationPacTracs 2.0 Quick Start Guide
PacTracs 2.0 Quick Start Guide If this Quick Start Guide or the Help menu does not provide the information needed, call the Marine Exchange s 24 hour Operations Center and our watchstander will provide
More informationSimply point and choose
Simply point and choose Examples of menu buttons: Center on Boat - The chart updates itself around the boat automatically. Quick Route - Quick and easy, make and activate a route from the boat s position.
More informationTeledyne PDS. Trailing Suction Hopper. Version April Teledyne RESON B.V. Stuttgartstraat AS Rotterdam The Netherlands
Trailing Suction Hopper Teledyne PDS Version 1.1.0 April 2017 Teledyne RESON B.V. Stuttgartstraat 42-44 3047 AS Rotterdam The Netherlands Tel.: +31 (0)10 245 15 00 www.teledyne-reson.com Teledyne RESON
More informationOPERATOR'S MANUAL COLOR GPS/PLOTTER/SOUNDER GP-7000F MODEL.
OPERATOR'S MANUAL COLOR GPS/PLOTTER/SOUNDER MODEL GP-7000F www.furuno.co.jp The paper used in this manual is elemental chlorine free. FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya,
More informationMEDALLION INSTRUMENTATION SYSTEMS MasterCraft Viper system
MEDALLION INSTRUMENTATION SYSTEMS 2010 MasterCraft Viper system MEDALLION INSTRUMENTATION SYSTEMS VIPER CHART PLOTTING OPERATORS MANUAL MAP SCREEN This manual will attempt to familiarize the
More informationNSS evo3 Quick Start Guide
NSS evo3 Quick Start Guide EN Front panel 2 3 4 5 6 7 8 9 10 11 12 12 1 No. Description 1 Touch screen. Pages/Home key - press to open the Home page for page selection and setup 2 options. WheelKey - user
More informationHDS Live Quick Guide. Keys. Press to activate the home page Repeat short presses to cycle the favorite buttons Press to open the new waypoint dialog
HDS Live Quick Guide EN Keys Pages Press to activate the home page Repeat short presses to cycle the favorite buttons Press to open the new waypoint dialog B Waypoint Press twice to save a waypoint Press
More informationB. HDS-5m & HDS-7m. GPS Mapping Receiver. Operations Guide
988-0176-02B HDS-5m & HDS-7m GPS Mapping Receiver Operations Guide Software updates for your unit. Occassionally check the Lowrance website for free software upgrades for your unit. Go to www.lowrance.com
More informationCL7 DISPLAY QUICK START MANUAL 6YD-2819U-E0
CL7 DISPLAY QUICK START MANUAL 6YD-2819U-E0 Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview
More informationUpgrading to v4.1. e-navigator User Guide V4.1
User guide V1.0 Upgrading to v4.1 Users of 3.4 or older versions of e- Navigator Planning Station or 1.3 or older versions of the e-np Reader will need to follow these instructions to begin using the v4.1
More informationTELchart ECS. User Manual
TELchart ECS User Manual version 1.24 EN This blank page is automatically inserted where appropriate to ensure that new Chapters begin on a recto page. Table of contents Introduction 13 Navigating the
More informationSOLIX QUICK START GUIDE. Power On/Off. Open the Home Screen. Tap the top, right corner of the status bar. Select Power Off.
SOLIX_QSG_532549-1EN_D.qxp_Layout 6 12/11/17 4:44 PM Page 1 SOLIX QUICK START GUIDE Power On/Off Tap the top, right corner of the status bar. Select Power Off. Press and hold the POWER key to power on/off.
More informationLCD MONITOR TOUCH PANEL DRIVER 2 OPERATION MANUAL. for Mac. Version 2.2
LCD MONITOR TOUCH PANEL DRIVER 2 OPERATION MANUAL for Mac Version 2.2 Contents Introduction...3 Setting up the Computer...4 Install...4 How to configure settings...5 Touch Panel Settings...7 Touch Operation
More informationChart Plotter USER MANUAL
Chart Plotter USER MANUAL 1. Disclaimer and warnings 5 2. Introduction 6 2.1 Keyboard 6 2.2 Connections scheme 7 3. Getting started 10 3.1 Switching ON 10 3.2 Switching OFF 10 3.3 First Setup page 10
More informationOPERATOR'S MANUAL. FAISPC MARK-2 (for FA-150) UAIS DISPLAY SOFTWARE MODEL.
OPERATOR'S MANUAL UAIS DISPLAY SOFTWARE MODEL FAISPC MARK-2 (for FA-150) www.furuno.co.jp The paper used in this manual is elemental chlorine free. FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho,
More informationGO XSE Quick Guide. Front panel. The System controls dialog. No. Key Function
GO XSE Quick Guide EN Front panel 1 No. Key Function 1 Power Press and hold to turn the unit ON/OFF. Press once to display the System control dialog. The System controls dialog Used for quick access to
More informationHDS Gen3 Quick Start Guide
HDS Gen3 Quick Start Guide EN Overview 1 4 6 5 7 2 3 8 9 10 11 No. Key Function 1 Touchscreen 2 Pages key Activates the home page 3 Cursor keys Pans the cursor, moves through menu items and adjusts values
More informationUsing the ADMIRALTY Vector Chart Service with Transas Navi-Sailor ECDIS (Navi-Planner 4000)
Using the ADMIRALTY Vector Chart Service with Transas Navi-Sailor ECDIS (Navi-Planner 000) This guide is based on Transas ECDIS (Navi-Planner) Version.00.0 (b.55) MNS- The guide should be used in conjunction
More informationReference For version 2.0
Rose Point Navigation Systems COASTAL EXPLORER Reference For version 2.0 The information in this manual is subject to change without notice. Copyright 2008 Rose Point Navigation Systems. All rights reserved.
More informationZeus 2 Glass Helm QuickStart Guide
Zeus 2 Glass Helm QuickStart Guide EN Turning on/off the Zeus 2 Glass Helm system Press the Power key/button: - on the front of the Zeus 2 processor - on the front of the monitor (depending on type of
More informationNew Software v2.01 INDEX. Model: GP-1670/1670F. Model: GP-1870/1870F. 1. Wireless Solution (Model: GP-1870/F only)
Model: GP-1670/1670F Model: GP-1870/1870F New Software v2.01 1. Wireless Solution (Model: GP-1870/F only) 1-1 Weather Information by C-Weather 1-2 Chart Plotter Link by Plan2Nav App 1-3 Important Notice
More informationHow to update OS image from V1421 to V1501 by Exe file
Author Sean Hsu Version 1.0.0 Date 2010/4/20 Page 1/13 How to update OS image from V1421 to V1501 by Exe file Applies to: Platform OS version WinPAC/ViewPAC utility version WP-8x3x N/A N/A WP-8x4x All
More informationUpgrading to v4.1. Passage Planner User Guide V4.1
User guide V1.0 Upgrading to v4.1 Users of 3.4 or older versions of e- Navigator Planning Station or 1.3 or older versions of the e-np Reader will need to follow these instructions to begin using the v4.1
More informationR5 SUPREME SW Release notes
Table of contents 1 R5 SUPREME CDU SW release history... 4 1.1 SW 1.2.6 (2018-05-04)... 4 1.1.1 Compatibility... 4 1.1.2 List of changes... 4 1.2 SW 1.2.5 (2017-03-12)... 4 1.2.1 Compatibility... 4 1.2.2
More informationDigiSoft GmbH & Co. KG Waldstrasse 7 * D Berg USER MANUAL
DigiSoft GmbH & Co. KG Waldstrasse 7 * D - 76768 Berg USER MANUAL The professional Navigation system Version 4.0 Update: 20.07.2006 TABLE OF CONTENTS 1. GENERAL INFORMATION...1 1.1 Description of the
More informationHDS Gen2 Touch. Operator manual. lowrance.com ENGLISH
HDS Gen2 Touch Operator manual ENGLISH lowrance.com Copyright 2012 Navico All Rights Reserved Lowrance and Navico are registered trademarks of Navico. Fishing Hot Spots is a registered trademark of Fishing
More informationSTRIKER PLUS 4/5/7/9. Owner s Manual
STRIKER PLUS 4/5/7/9 Owner s Manual 2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of
More informationUser Guide. Model Temperature Datalogger Kit Model Temperature and Humidity Datalogger Kit Model SW276 Datalogging Software SW276
User Guide Model 42265 Temperature Datalogger Kit Model 42275 Temperature and Humidity Datalogger Kit Model SW276 Datalogging Software SW276 Introduction Congratulations on your purchase of Extech Instrument
More informationCentral Management Software. Cam Viewer 3 Lite. User Manual
Central Management Software Cam Viewer 3 Lite User Manual Version 1.0.0 Table of Contents 1. System Requirement...4 2. Software Installation...5 3. Configuration Wizard...9 3.1 Channel...10 3.1.1 Adding
More informationTZ Professional v3. The biggest TIMEZERO release ever!
TZ Professional v3 The biggest TIMEZERO release ever! New PBG Module New PBG Module Resolution has been doubled (now 1.5m x 1.5m) Automatic and real time extrapolation (no delay when customizing brush
More informationChapter 3 Operating instructions
Chapter 3 Operating instructions Summary This chapter describes the how to control and navigate through the TVR 30 s menus and options. Content Control interfaces 10 Controlling the TVR 30 10 Front panel
More informationNSO evo2 QuickStart Guide
NSO evo2 QuickStart Guide EN Turning the NSO evo2 system on and off Press the Power key/button: - on the front of the NSO evo2 Processor - on the front of the monitor (depending on type of monitor and
More informationHEMA Navigator Ezi-Ozi User Guide
HEMA Navigator Ezi-Ozi User Guide Table of Contents HEMA Navigator Ezi-Ozi User Guide... 1 Introduction... 2 Starting OziExplorer... 2 Screen Layout... 3 Acquiring a GPS Satellite Fix... 4 Standard Program
More informationMARITIME UNIVERSITY OF SZCZECIN. Institute of Marine Traffic Engineering. Exercises no. 1
MARITIME UNIVERSITY OF SZCZECIN Institute of Marine Traffic Engineering Exercises no. 1 Procedure for starting and adjusting basic navigation systems receivers Prepared by:: Approved by: Valid from: 2018
More informationMARITIME UNIVERSITY OF SZCZECIN. Institute of Marine Traffic Engineering. Exercises nr 1
MARITIME UNIVERSITY OF SZCZECIN Institute of Marine Traffic Engineering Exercises nr 1 Procedure for starting and adjusting basic navigation systems receivers Prepared by:: Approved by: Valid from: 2018
More informationCENTAUR S REAL-TIME GRAPHIC INTERFACE V4.0 OPERATOR S MANUAL
CENTAUR S REAL-TIME GRAPHIC INTERFACE V4.0 OPERATOR S MANUAL TABLE OF CONTENTS Installation... 6 Introduction to Centaur s real-time Graphic Interface... 6 Computer Requirements... 7 Operating System
More informationSMART Board Interactive Whiteboard Basics
SMART Board Interactive Whiteboard Basics This Quick Reference Guide provides an overview of the information you need to begin using a SMART Board interactive whiteboard. Before you begin, make sure the
More informationAMEC AIS. Quick Start Guide. For ios & Android Devices
AMEC AIS Quick Start Guide For ios & Android Devices 1 CONTENTS COPYRIGHT... 3 DISCLAIMER... 3 FOREWORD... 4 What is the AMEC AIS App?... 4 How to download you AMEC AIS App for ios & Android... 5 For ios
More informationModels: FMD-3200 (with 19" LCD) FMD-3300 (with 27" wide or 23.1" LCD) FMD-3200-BB (black-box type)
Models: FMD-00 (with 9" LCD) FMD-00 (with 7" wide or." LCD) FMD-00-BB (black-box type) www.furuno.com FURUNO s provision Fast, of thoroughgoing training intuitive route planning Proper training is required
More information239 Excel Keyboard Shortcuts
239 Excel Keyboard Shortcuts WORK FASTER AND MORE EFFICIENTLY WITH THESE CLEARLY ILLUSTRATED EXCEL SHORTCUTS. My Online Training Hub https://www.myonlinetraininghub.com/ Below is a huge list of Excel keyboard
More informationDM800 ECDIS. Solid Safe Simple. Danelec systems. Electronic Chart Display & Information System. Solid Safe Simple
Danelec systems DM800 ECDIS Electronic Chart Display & Information System A Revolution in Shipboard Service Servicing and repairing shipboard electronics can be time consuming and expensive. There are
More informationENVIRONMENTAL CONDITION
Models: FMD-3200 (with 9" LCD) FMD-3300 (with 27" wide or 23." LCD) FMD-3200-BB (black-box type) Where to buy: Tel: 28-479-55 marinesales@mackaycomm.com www.furuno.com FURUNO s provision Fast, of thoroughgoing
More informationDM800/700 ECDIS. Electronic Chart Display and Information System. Danelec systems Solid Safe Simple
DM800/700 ECDIS Electronic Chart Display and Information System Danelec systems Solid Safe Simple New ECDIS platform with breakthrough SWAP technology TM IMO-compliant with the latest ECDIS standards and
More informationQUADRA-CHEK 2000 Demo User's Manual. Evaluation Unit
QUADRA-CHEK 2000 Demo User's Manual Evaluation Unit English (en) 06/2018 Contents Contents 1 Fundamentals...7 2 Software Installation...11 3 Basic Operation... 17 4 Software Configuration...41 5 Quick
More informationMicrosoft PowerPoint 2016 Basics Unit 9 Final Review - Student Notes Directions: Fill in the blanks.
Directions: Fill in the blanks. 1. PowerPoint Window Layout 2. File Tab When clicked, opens - automatically opens the Info option by default Holds the following options: - Info - New - Open - Save - Save
More informationLCD MONITOR TOUCH PANEL DRIVER OPERATION MANUAL. for Mac. Version 1.0 PN-L802B/PN-L702B/PN-L602B. Applicable models
LCD MONITOR TOUCH PANEL DRIVER OPERATION MANUAL for Mac Version 1.0 Applicable models PN-L802B/PN-L702B/PN-L602B Contents Introduction...3 System Requirements...3 Setting up the Computer...4 Installing
More informationNavNet 3D Chart Installation Guide v3.0 MFD8/12/BB
NavNet 3D Chart Installation Guide v3.0 MFD8/12/BB 1. DATA CATALOG... 2 1.1. SystemID... 2 1.2. Memory Blocks... 2 1.3. Data List... 3 1.3.1. Reference... 3 1.3.2. Status... 3 1.3.3. Release Version...
More informationGO XSE. Getting Started. simrad-yachting.com ENGLISH
GO XSE Getting Started ENGLISH simrad-yachting.com Contents 7 Introduction 7 The Home page 8 Application pages 10 Basic operation 10 System Controls dialog 10 Turning the system on and off 11 Selecting
More information