NF15ACV. VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP. Firmware Release Notes

Size: px

Start display at page:

Download "NF15ACV. VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP. Firmware Release Notes"

Jonah Gibbs
6 years ago
Views:

1 NF15ACV VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP Firmware Release Notes

2 Copyright Copyright 2017 NetComm Wireless Limited. All rights reserved. The information contained herein is proprietary to NetComm Wireless. No part of this document may be translated, transcribed, reproduced, in any form, or by any means without prior written consent of NetComm Wireless. Trademarks and registered trademarks are the property of NetComm Wireless Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product. Note: This document is subject to change without notice. This document covers the following product(s): NetComm Wireless VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP (NF15ACV) DOCUMENT VERSION DATE Initial document release 11 July 2017 Table 1 - Document Revision History 2

Firmware Details ITEM DESCRIPTION Model Product Name NF15ACV VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP Date 11 July 2017 Firmware Version Official / Beta Firmware File Name File

3 Firmware Details ITEM DESCRIPTION Model Product Name NF15ACV VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP Date 11 July 2017 Firmware Version Official / Beta Firmware File Name File Size MD5 Checksum NF15ACV_v1.2.42_NET736 Official NF15ACV_v1.2.42_NET736_FW vm 5.93 MB 8b65a59def19dea4069b6647ff Firmware Upgrade Instructions 1. Connect the supplied RJ45 Ethernet cable from one of the Ethernet Ports on the back of the device to your computer. 2. Connect the supplied power adapter to your router and press the on/off button to power the router on. 3. Allow seconds for the NF15ACV to power up. 4. Open a web browser (e.g. Internet Explorer, Firefox, Safari, etc) and type into the address bar and press Enter. 5. At the login screen, type admin into both the Username and the Password fields and click OK. 6. Select Admin and then Firmware Upgrade from the menu on the left side of the screen 7. Select Browse / Choose File to locate and load the firmware file (NF15ACV_v1.2.42_NET736_FW vm.img). 3

42_NET736. Note: You must reset the router to the default settings after the firmware upgrade to ensure that it functions correctly. 10.

4 8. Click Upgrade to proceed, then click OK on the pop-up dialog box. The process will take a few minutes until the router reboots itself. 9. When the upgrade is complete, refresh the webpage. The router status page is displayed. Make sure the current firmware is NF15ACV_v1.2.42_NET736. Note: You must reset the router to the default settings after the firmware upgrade to ensure that it functions correctly. 10. Using the menu on the left side of the screen, select Admin, then Backup / Restore. Next to Reset Settings to Default, click the Reset button. 4

5 11. Click the OK button on the pop-up dialog box. The router reboots with the factory default settings. The firmware upgrade is complete. Note: We recommend that you change the administrator password on the device to a strong one. To create a strong password, consider using a minimum of 8 characters, a combination of upper and lower case characters, and numbers. 5

6 Version History NF15ACV_v1.2.42_NET736 New features Changes Enhancements PPPoE password now supports special characters. System time is now displayed on the Status page. Added a reboot countdown timer which is displayed when the setup wizard is completed. Added a field check on Access Control List Configuration page to block invalid WAN port/subnet mask. Updated TR-069 port default value to Updated UPnP information. Updated the Tx Rate display format on the Active WLAN Client page. Enabled Remote management by default. Disabled WPS by default. Removed the user account. VPI and VCI entry are updated accordingly when modifying the existing ADSL PPPoA entry. Adding/Deleting an IP/Port filtering entry no longer requires refreshing the page upon completion. Adding/Deleting a MAC Filtering entry no longer requires refreshing the page upon completion. Adding/Deleting a URL Filtering entry no longer requires refreshing the page upon completion. Fixed a remote access issue via web user interface when the DMZ function is enabled. Fixed a port forwarding issue when Remote IP is specified. Fixed a DNS query issue. Addressed a compatibility issue with DSLAMS with IKANOS chipsets. Fixed a broadcast issue on the Wireless 5GHz band when n mode is selected. Added Channel 12 and 13 as an option on the Wireless 2.4GHz band. NF15ACV_v1.2.42_NET729 Initial firmware release New features Changes None. None. Enhancements None. 6

Firmware Release Notes

Firmware Release Notes NF18ACV VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP Doc No. RN01086 Copyright Copyright 2018 NetComm Wireless Limited. All rights reserved. The information contained herein