Terminology. This document uses the following terms:

Size: px
Start display at page:

Download "Terminology. This document uses the following terms:"

Transcription

1 CX4 Architecture for NS Series Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover December 6, 28 If you want to connect the storage system in a Celerra NS-48 system in a Fibre Channel direct or switch configuration with a new or existing Microsoft Windows server with native multipath failover, this document is for you. A Celerra NS-48 system uses a CX4-48 storage system. The main topics are: Terminology... 2 Before you start... 4 Determining if your server has a supported configuration... 6 Installing HBAs in the server... 9 Installing or updating the HBA driver Installing the Admsnap utility and/or Admhost utility Connecting the storage system to the server in a Fibre Channel direct configuration Connecting the storage system to the server in a Fibre Channel switch configuration Registering the server with the storage system Verifying storage-system health... 3 Setting storage-system failover values for the server initiators with Navisphere Manager Verifying your high-availability Fibre Channel configuration Configuring an existing storage system Preparing LUNs to receive data Sending Windows disk information to the storage system Verifying your Windows Server 28 native multipath failover configuration

2 Terminology This document uses the following terms: host management station server existing server new server existing HBA new HBA existing storage system field-replaceable unit (FRU) SPE DAE storage processor (SP) UltraFlex I/O module A computer that is or will be connected to a CLARiiON storage system. This computer is called either a management station or a server, depending on how it is or will be connected to the storage system. A host from which you manage CLARiiON storage systems. It must be on the same network as the storage-system management ports. A management host may also be a server. A host that is already or will be connected directly or through a switch to the Fibre Channel ports on a CLARiiON storage system. A management host may also be a server. The server that is already configured for and connected to a CLARiiON storage system. A server that is not already connected to or set up for a CLARiiON storage system. The host bus adapter (HBA) that is already installed in a server. The HBA that was not already installed in the server. A storage system that is already connected to a server and configured for storage. A storage-system component that you can add to your storage system or replace in your storage system at your site. Examples of FRUs are disks andpower/cooling modules. A storage processor enclosure that contains two storage processors (SPs) with I/O modules. A disk-array enclosure that provides storage for a DAE. Each DAE supports a maximum of 15 disks. A printed-circuit board with processors, memory modules, and control logic that manages the I/O between the server and the disk modules. A printed-circuit board with either Fibre Channel front-end ports for Celerra blades or host I/O and/or back-end ports for I/O to the disks. 2 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

3 LUN RAID group storage group A grouping of physical disk partitions into one span of disk storage space. Each LUN you create is distributed equally across the disks in the RAID group. A LUN looks like an individual disk to the server s operating system. A set of disks with the same capacity and RAID type on which you create one or more LUNs. A group of one or more LUNs that you connect to a server to provide the server access to the LUNs. Only the servers connected to a storage group can access the LUNs in the storage group. A CX4 series storage system has two SPs, so it is called a dual-sp system. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 3

4 Before you start Read the release notes for your storage system, which are available in the Technical Documentation and Advisories section on the Powerlink website. A Navisphere management station with a supported Internet browser for running Navisphere Manager and on the same network as the storage-system management ports. This host can also be a server. For supported host and browsers, refer to the E-Lab Interoperability Navigator on the Powerlink website. A supported Windows host on the same subnet as the storage-system management ports. You can use this host: As a Navisphere management station To run the Navisphere Service Taskbar, which runs only on awindowshost. As a CLARalert monitor station, which must be a Windows host, but cannot be a server (that is, it cannot send I/O to the storage-system data ports). A supported Windows host that is or will be a server with Fibre Channel connections to the storage system. This server must have a supported server configuration; that is, it must have all required updates, such as hot fixes or patches, installed. A Navisphere management station with a supported Internet browser that is on the same network as the storage-system management ports. This host can also be the server or a Navisphere off-array management station. For supported Internet browsers, see the Navisphere Manager release notes in the Technical Documentation and Advisories section of the Powerlink website. One or more supported Emulex or QLogic Fibre Channel host bus adapters (HBAs), which may already be installed in the server. These adapters must have the latest supported BIOS and driver. Never mix Fibre Channel HBAs from different vendors in the same server. An optical cable for each storage-processor (SP) Fibre Channel port you will use on the storage system. (Each storage processor has two ports.) These cables may already be connected for a 4 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

5 configuration with an existing storage system or server. For cable specifications, refer to the technical specifications for the storage system in the Technical Documentation and Advisories section of the Powerlink website. For a switch configuration One or two Fibre Channel switches, which may already be installed, and an optical cable for connecting each HBA port to a switch port, if not already connected. A method for writing data to a LUN on the storage system that will test the paths from the server to the storage system. You can download an I/O simulator (Iometer) from the following website: Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 5

6 Determining if your server has a supported configuration Before you can determine if your server has a supported configuration, you need to know the revision and patch level of the operating system on the server.if you have this information, go to Verifying a server s configuration with E-Lab Interoperability Navigator, page 7.Ifyoudonot have this information, you can generate a server configuration report foryourserverusing the Navisphere Server Utility. If you do not have the server utility installed, run it from the server support CD. Starting the Navisphere Server Utility You can run the server utility from the server or from the server support CD. For Windows servers, you must install version 6.2 or later of the server utility on the server to use the utility s registration service feature. This feature automatically updates server information to the storage system. Starting the Navisphere Server Utility on a Windows server 1. Run the Navisphere Server Utility by selecting Start > Programs >EMC>Navisphere>NavisphereServerUtilityor Start > All Programs > EMC > Navisphere > Navisphere Server Utility. 2. Select your language, if prompted for it. A text-based version of the utility is installed automatically when you install the utility. To start the text-based version, at a command prompt enter cd C:\Program Files\EMC\Navisphere Server Utility or cd C:\Program Files (x86)\emc\navisphere Server Utility, then enter NaviServerUtilCLI.exe. Starting the Navisphere Server Utility on a Windows server from the CD 1. Log in to the Windows server as the administrator or someone who has administrative privileges. 6 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

7 2. In the server s drive, insert the server support CD, which shipped with the storage system. The server support menu opens. If you do not see the server support menu, open it: From the Windows taskbar, select: Start > Run In the Run dialog box, enter: drive:\locales\en_us\start.html where drive is the letter for the CD drive. Click OK. 3. From the main menu select Run Products from CD. The RUN PRODUCTS page opens. 4. Select Navisphere Server Utility. Generating a high-availability report for a server 1. In the Navisphere Server Utility dialog box, select Verify Server High-Availability to generate a report of the server s environment. This option detects if PowerPath or some other failover software, such as DMP, is running. After the verification, the utility generates a summary report and saves it to the server. 2. In the summary report, select the Checklist tab to view the informationabouttheserverthatyouneedtocompareagainstthe E-Lab Interoperability Navigator information. Verifying a server s configuration with E-Lab Interoperability Navigator 1. From your web browser, go to the Powerlink website and log in. 2. If you are not registered with Powerlink, register and create a username and password. 3. Select E-Lab Interoperability Navigator from the Tools menu on the right-side of the home page. 4. From the E-Lab Interoperability Navigator page, select Launch E-Lab Interoperability Navigator and then select the Wizards tab. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 7

8 5. From the drop-down menu, select the CLARiiON Wizards. 6. In Select a wizard, select Host Attach Wizard. 7. For each step of the wizard, provide the requested information based on what is already installed on the server or what you intend to install on the server. If the configuration you entered is invalid, an additional step appears in the wizard and a Results, EMC Support Statements pane appears on the right with information to help you provide the requested information in the additional step. If the configuration you entered is valid, a Results link appears on the right. 8. When the Results link appears, click it to view a report that contains informationabouttheconfigurationyouentered. 9. Print and/or save a copy of the report. 1. Close the E-Lab Interoperability Navigator. 11. Compare this report to either the information that you know about your server software or the checklist report you generated using the server utility. 12. If your server software versions and/or patches or hot-fixes are not listed in the Host Attach Wizard report, you need to upgrade to a supported version or patch before continuing. The Host Attach Wizard only displays options that are supported by EMC. If any of the configuration information on the server utility s high availability report cannot be found in the wizard, then it is not supported. 8 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

9 Installing HBAs in theserver Before you start Read this section for any configuration. For the server to communicate with the storage-system Fibre Channel data ports, the server must have one or more supported HBAs. To complete this procedure, you need one or more supported HBAs with the latest supported BIOS and driver. For information on supported HBAs, BIOS, and drivers, refer to the E-Lab Interoperability Navigator on the Powerlink website. Never mix HBAs from different vendors in the same server. Installing HBAs! CAUTION HBAs are very susceptible to damage caused by static discharge and need to be handled accordingly. Before handling HBAs, observe the following precautions: Store HBAs in antistatic bags. Use a ground (ESD) strap whenever you handle HBAs. Never plug or unplug HBAs with the power on. Severe component damage can result. 1. If the server is powered up: a. Shut down the server s operating system. b. Power down the server. c. Unplug the server s power cord from the power outlet. 2. Put on an ESD wristband, and clip its lead to bare metal on the server s chassis. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 9

10 3. For each HBA that you are installing: a. Locate an empty PCI bus slot or a slot in the server that is preferred for PCI cards. b. Install the HBA following the instructions provided by the HBA vendor. c. If you installed a replacement HBA, reconnect the cables that you removed in the exact same way as they were connected to the original HBA. 4. Plug the server s power cord into the power outlet, and power up the server. 1 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

11 Installing or updating the HBA driver Read this section for any configuration. The server must run a supported operating system and HBA driver. EMC recommends that you install the latest supported version of the driver. For information on the supported HBA drivers, refer to the E-Lab Interoperability Navigator on the Powerlink website. Before you start To complete this procedure, you will need: The latest version of the supported HBA driver. You can download the latest supported version and instructions for installing the Emulex HBA driver from the vendor s website: You can download the latest supported version and instructions for installing the QLogic HBA driver from the vendor s website: The HBA driver is also on the installation CD that ships with the HBA. However, this version may not be the latest supported version. Any updates, such as hot fixes or service packs to the server s operating system that are required for the HBA driver version you will install. For information on any required updates, refer to one of the following: E-Lab Interoperability Navigator on the Powerlink website The HBA vendor s website Installing the HBA driver 1. Install any updates, such as hot fixes or service packs, to the server s operating system that are required for the HBA driver version you are installing. 2. If required by hot fix or patch, reboot the server. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 11

12 3. Install the driver following the instructions on the HBA vendor s website. 4. Reboot the server when the installation program prompts you to reboot. 5. If the installation program did not prompt you to reboot, then reboot the server when the driver installation is complete. 12 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

13 Installing the Admsnap utility and/or Admhost utility If you want the server to access snapshots of LUNs in the storage system, you must install the Admsnap Utility on the server. If the server is running Windows and want it to access LUNs that participate in SAN Copy sessions, you must install Admhost Utility on the server. The Admhost Utility is supported only on the following Microsoft Windows platforms: Windows Server 28, Windows Server 23, or Windows 2. For the supported versions of these operating systems, see the Admhost Release Notes. Installing the Admsnap Utility on a Windows server EMC recommends that you install the most recent version of the Admsnap Utility software that is appropriate for your configuration. You can download the most recent version from the software download page on the Powerlink website (CX4 series, CX3 series, CX series, and AX4-5 series) or on the storage-system support website (AX series). You can also install the software from the server support CD (any storage system); however, the CD may not contain the most recent version for your configuration. 1. Log in to the Windows server as the administrator or as someone who has administrative privileges. 2. If admsnap is already installed, refer to Removing the Admsnap Utility on a Windows server, page 17. The remove step is needed because the installation program will not let you install admsnap over an existing revision. 3. To download the software for CX4 series, CX3 series, CX series, or AX4 5 series storage systems with Navisphere Manager, do the following: a. From the Navigator drop-down menu at the top right of the Powerlink website, select Software Downloads and Patches. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 13

14 b. Select the appropriate Admsnap Utility version to download and select the option to save the software to your server. c. In the folder where you saved the software, double-click the executable file for your operating system to start the installation wizard. 4. To install the software from the server support CD (any storage system), do the following: a. In the server s drive, insert the server support CD, which shipped with the storage system. The server support menu opens. If you do not see the server support menu, follow the steps below to open it. If you have a Windows Server 28 Core system, the server support menu will not open; skip to step 6 for information on starting the executable. From the Windows taskbar, select: Start > Run In the Run dialog box, enter: drive:\locales\en_us\start.html where drive is the letter for the CD drive. Click OK. b. From the main menu select Install Products on Server. The INSTALL PRODUCTS page opens. c. Select Admsnap Utility and then select the Windows operating system running on the server. The following options are available: Admsnap Windows Server 28 Admsnap Windows Server For Windows Server 28 Core systems, do the following: a. Change to the CD drive, for example d:. b. Navigate to the Windows admsnap utility directory. cd windows\snap_view_admsnap c. Start the executable: 14 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

15 admsnap_win2k8.exe 6. Follow the instructions on the installation screens to install the Admsnap Utility. 7. When the installation is complete, click Finish to exit the wizard. If you selected the default destination folder, admsnap is installed in one of the following: On Windows Server 28 and 23 (64-bit) systems C:\Program Files (x86)\emc\ Navisphere Admsnap On Windows Server 28 and 23 (32-bit) systems C:\Program Files\EMC\Navisphere Admsnap 8. If you installed the Admsnap Utility from the CD, close the server support menu by selecting Main Menu and then Exit. You can now remove the CD from the server s CD drive. Installing the Admhost Utility on a Windows server EMC recommends that you install the most recent version of the Admhost Utility software that is appropriate for your configuration. You can download the most recent version from the software download page on the Powerlink website (CX4 series, CX3 series, CX series, and AX4-5 series) or on the storage-system support website. You can also install the software from the server support CD (any storage system); however, the CD may not contain the most recent version for your configuration. 1. Log in to the Windows server as the administrator or as someone who has administrator privileges. 2. You cannot install admhost over an existing version. If you think admhost is already installed, see Removing the Admhost Utility on a Windows server, page To download the software for CX4 series, CX3 series, CX series, or AX4 5 series storage systems, do the following: a. From the Navigator drop-down menu at the top right of the Powerlink website, select Software Downloads and Patches. b. Select the appropriate Admhost Utility version to download and select the option to save the software to your server. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 15

16 c. In the folder where you saved the software, double-click the executable file to start the installation wizard. 4. To install the software from the server support CD (any storage system), do the following: a. In the server s drive, insert the server support CD that shipped with your storage system. The server support menu opens. If you do not see the server support menu, follow the steps below to open it. If you have a Windows Server 28 Core system, the server support menu will not open; skip to step 6 for information on starting the executable. From the Windows taskbar, select: Start > Run In the Run dialog box, enter: drive:\locales\en_us\start.html where drive is the letter for the CD drive. Click OK. b. From the main menu select Install Products on Server. The INSTALL PRODUCTS page opens. c. Select Admhost Utility and then select the Windows operating system running on the server. The following three options are available: Admhost Windows Server 28 Admhost Windows Server 23 Admhost Windows 2 5. For Windows Server 28 Core systems, do the following: a. Change to the CD drive, for example d:. b. Navigate to the Windows admhost utility directory. cd windows\san_copy_admhost c. Start the executable: admhost_win2k8.exe 16 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

17 6. Follow the instructions on the installation screens to install the Admhost Utility. 7. When the installation is complete, click Finish to exit the wizard. You have installed the admhost software. If you selected the default destination folder, admhost is installed in the directory C:\Program Files\EMC\Navisphere Admhost or C:\Program Files (x86)\emc\navisphere Admhost. 8. If you installed the Admhost Utility from the CD, close the server support menu by selecting Main Menu and then Exit. You can now remove the CD from the server s CD drive. Removing the Admsnap Utility on a Windows server 1. Open Control Panel by selecting Start > Settings > Control Panel or Start > Control Panel. 2. On the Control Panel pane, double-click Add/Remove Programs or Program and Features. 3. Select Navisphere Admsnap and click Change/Remove or Uninstall/Change. 4. If asked to confirm the removal, click OK and follow the steps to remove the software program. Removing the Admhost Utility on a Windows server 1. Open Control Panel by selecting Start > Settings > Control Panel or Start > Control Panel. 2. On the Control Panel pane, double-click Add/Remove Programs or Program and Features. 3. Select Navisphere Admhost and click Change/Remove or Uninstall/Change. 4. If asked to confirm the removal, click OK and follow the steps to remove the software program. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 17

18 1/1/1 1/1/1 Connecting the storage system to the server in a Fibre Channel direct configuration Use optical cables to connect storage-system Fibre Channel front-end data ports to the server HBA ports. Before you start To complete this procedure, you need an optical cable for each Fibre Channel front-end data SP port that you will use on the storage system. For cable specifications, refer to the technical specifications for your storagesysteminthedocumentation and Technical Advisories section of the Powerlink website or on the storage-system documentation and resourcescd,whichshippedwiththestoragesystem. Identifying storage-system Fibre Channel front-end ports for server connections You can connect serverstoanyports(,1,2,3)ontheultraflex Fibre Channel I/O modules in slot A2 for SP A and in slot B2 for SP B (Figure 4): Figure 1 I/O module slots B B1 B2 B3 B4 A A1 A2 A3 A4 CL4253 Handling optical cables Optical cables are susceptible to damage, so take the following precautions when handling them: Keep the covers on all optical cables until you are ready to insert them. Avoid tight bends. If you need to make a 9º bend, do it over 6 to 12 inches. Do not use optical cables to support weight (including their own unsupported weight if they are long). 18 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

19 Do not pull long runs of cable; instead, lay the cable in place or pull only a few feet at a time. Place the cables where no one can step on them or roll equipment over them. Cabling the Fibre Channel front-end data ports to the server HBA ports For the highest availability with a multiple-hba server: If the server has two HBAs, connect one HBA to a Fibre Channel front-end port on SP A and the other HBA to a Fibre Channel front-port on SP B. If the server has four HBAs, connect two HBAs to separate Fibre Channel front-end ports on SP A, and the other two HBAs to separate Fibre Channel front-end ports on SP B. If the server has more than four HBAs, connect an HBA to a Fibre Channel front-end port on SP A and another HBA to a Fibre Channel front-end port on SP B, and continue connecting an HBA to a Fibre Channel front-end port on SP A and another next HBA to a Fibre Channel front-end port on SP B until you have connected all the HBAs or used all the available Fibre Channel front-end ports. For each new HBA port you want to connect to a storage-system Fibre Channel (FC) front-end data port: 1. Locate the FC front-end data port to which you will connect the HBA port. For information on identifying the front-end ports using Navisphere Manager, refer to the Navisphere Manager help. Applications such as MirrorView/A, MirrorView/S, or SAN Copy software may restrict or require the use of certain SP ports. Refer to the application documentation for specific cabling information. 2. Remove the protective covers from the optical connector on the HBA port and from one end of an optical cable and plug the cable into the HBA connector. 3. Remove the protective covers from the free end of the optical cable and from the FC front-end data port connector on the storage Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 19

20 1/1/1 1/1/1 system s storage processor, and plug the cable into the data port connector (Figure 2 and Figure 3). CL421 Figure 2 Connecting an optical cable Figure 3 Sample cabling for a Fibre Channel direct configuration CL Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

21 1/1/1 1/1/1 Connecting the storage system to the server in a Fibre Channel switch configuration Use optical cables to connect switch ports to the storage-system Fibre Channel front-end data ports and to Fibre Channel switch ports and to connect the switch ports to the server HBA ports. Applications such as MirrorView /A, MirrorView/S, or SAN Copy software may restrict or require the use of certain SP ports. Refer to the application documentation for specific cabling information. Before you start To complete this procedure, you will need an optical cable for each switch port you will use. Specifications for the optical cables that connect the switch to the storage system are in the storage system s technical specifications in the documentation section of Powerlink. Identifying storage-system Fibre Channel front-end ports for server connections You can connect servers to any ports (, 1, 2, 3) on the UltraFlex Fibre Channel I/O modules in slot A2 for SP A and in slot B2 for SP B (Figure 4): Figure 4 I/O module slots B B1 B2 B3 B4 A A1 A2 A3 A4 CL4253 Handling optical cables Optical cables are susceptible to damage, so take the following precautions when handling them: Keep the covers on all optical cables until you are ready to insert them. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 21

22 Avoid tight bends. If you need to make a 9º bend, do it over 6 to 12 inches. Do not use optical cables to support weight (including their own unsupported weight if they are long). Do not pull long runs of cable; instead, lay the cable in place or pull only a few feet at a time. Place the cables where no one can step on them or roll equipment over them. Cabling the Fibre Channel front-end data ports to the switch ports (if necessary) For highest availability, connect one or more Fibre Channel front-end dataportsonspatoportsontheswitchandconnectthesamenumber of Fibre Channel front-end data ports on SP B to ports on same switch or on another switch, if two switches are available. Customer-installable switches are easily configured. Some are preconfigured, to use only ports and 4 for SP connections and only ports 1-3 and 5-15 for HBA connections. With switches set up in such hard zones, you can connect the Fibre ports only to ports and 4 and HBAs only to ports 1 3 and For highest availability with one of these hard zoned switches and a multiple-hba server, connect either Fibre port on SP A to switch port and either FE port on SP B to switch port 4. For each Fibre Channel (FC) front-end data port on the storage system that you will use for I/O with the server: 1. Locate the FC front-end data port to which you will connect the switch port. For information on identifying the front-end ports using Navisphere Manager, refer to the Navisphere Manager help. Applications such as MirrorView/A, MirrorView/S, or SAN Copy software may restrict or require the use of certain SP ports. Refer to the application documentation for specific cabling information. 22 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

23 1/1/1 1/1/1 2. Remove the protective cover from the FC front-end data port connector on the SP and from one end of the optical cable, and plug the cable into the data port connector (Figure 5 and Figure 6). 3. Remove the protective cover from the optical connector on the switch port that you will use and from the free end of the optical cable, and plug the cable into the switch port (Figure 5 and Figure 6). CL421 Figure 5 Connecting an optical cable Figure 6 Sample cabling between a storage system and two switches CL4231 Cabling the switch ports to the server HBA ports (if necessary) For highest availability in a multiple-hba server, connect one or more HBAportstoportsontheswitchandconnectthesamenumberofHBA ports to ports on same switch or on another switch, if two switches are available. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 23

24 1/1/1 1/1/1 ForeachserverHBAportthatyouwilluseforI/Owiththestorage system: 1. Remove the protective cover from the FC switch port connector and from one end of the optical cable, and plug the cable into the connector. 2. RemovetheprotectivecoverfromtheserverHBAportconnector and from the free end of the optical cable, and plug the cable into the HBA port connector (Figure 7) Figure 7 Sample cabling for a Fibre Channel switch configuration CL4232 Zoning the switches You must use switch management software to update switch software and zone switches that are not hard zoned. 1. Connect the switch management ports to the network from which you will manage the switches. 2. If the switches are not running the most recent supported firmware version, install this software from the switch vendor s website. 24 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

25 For information on the supported switch firmware versions, see the E-Lab Interoperability Navigator on Powerlink. 3. Locate the zoning wizard CD that shipped with the switch. 4. Using the instructions provided with the CD, run the zoning wizard and select the zone configuration that is applicable to the way that you connected the storage-system Fibre ports and the server HBA ports to the switch. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 25

26 Registering the server with the storage system Running the Navisphere Server Utility for Windows Read this section for any configuration. Run the Navisphere Server Utility or Navisphere Host Agent on each server connected to the storage system to register the server s HBAs with the storage system. You can run the Navisphere Server Utility for Windows from the server, if you installed the utility on the server, or from the server support CD, which shipped with the storage system. Starting the Navisphere Server Utility on a Windows server 1. Run the Navisphere Server Utility by selecting Start > Programs >EMC>Navisphere>NavisphereServerUtilityor Start > All Programs > EMC > Navisphere > Navisphere Server Utility. 2. Select your language, if prompted for it. A text-based version of the utility is installed automatically when you install the utility. To start the text-based version, at a command prompt enter cd C:\Program Files\EMC\Navisphere Server Utility or cd C:\Program Files (x86)\emc\navisphere Server Utility, then enter NaviServerUtilCLI.exe. Starting the Navisphere Server Utility on a Windows server from the CD 1. Log in to the Windows server as the administrator or someone who has administrative privileges. 2. In the server s drive, insert the server support CD, which shipped with the storage system. The server support menu opens. If you do not see the server support menu, open it: From the Windows taskbar, select: Start > Run In the Run dialog box, enter: 26 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

27 drive:\locales\en_us\start.html where drive is the letter for the CD drive. Click OK. 3. From the main menu select Run Products from CD. The RUN PRODUCTS page opens. 4. Select Navisphere Server Utility. Registering the server using the Navisphere Server Utility on a Windows 1. If the host agent is running, stop the host agent service. 2. In the Navisphere Server Utility dialog box, select Register this server to all connected storage systems. The utility automatically scans for all connected storage systems and lists them under Connected Storage Systems. Locate the WWN of the HBA you just installed. The HBA should appear once for every SP port it is connected to. If the utility is already running, it does not automatically perform a scan, and you must click Rescan. 3. Click Next toregistertheserverwiththestoragesystem. Starting the Navisphere Host Agent Starting the host agent The utility sends the server s name and WWN of the HBA to each storage system. Once the server has storage on the storage system, the utility also sends the device name and volume or file system information for each LUN (virtual disk) in the storage system that the server sees. 4. Click Finish to exit the utility. 5. If you stopped the host agent, restart it. Starting the host agent on a server automatically registers the server s HBAs with the storage system. 1. At the Windows server, log in as the administrator or the equivalent. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 27

28 2. Open the Services pane. From the desktop, right-click My Computer and select Manage > Services and Applications > Services. or Select Start > Administrative Tools > Computer Management > Services and Applications > Services. The Services pane opens. 3. In the Services pane, right-click Navisphere Agent and select Start. 4. If you want the host agent to start automatically at system startup: a. Right-click Navisphere Agent and select Properties. The Navisphere Agent Properties dialog box opens. b. Select the General tab. c. In Startup Type, select Automatic. 5. Close Computer Management. The host agent will now start automatically at system startup. It may take a few minutes for the host agent to start when: Applications are using the storage system, or The SP event log is large and the host agent configuration file is not set up. Verifying HBA registration with Navisphere Manager 1. From the Navisphere Manager Storage tree, right-click the icon for the storage system for which you want to verify HBA registration, and click Connectivity Status. The Connectivity Status dialog box opens. 2. Verify that the server to SP port connection is displayed as Yes under the Registered columns. If not, refer to the Troubleshooting Flowcharts section on the CLARiiON Tools page on the Powerlink website. 28 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

29 To access the CLARiiON Tools page, use the Navigator drop-down menu at the top right of the Powerlink home page. Once all HBAs belonging to a server are registered, you can assign the server to storage groups. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 29

30 Verifying storage-system health Read this section for any configuration. Use the storage system verification wizard that is part of the Navisphere Service Taskbar to: Validate the connectivity of the storage-system hardware components Check back-end functionality Check the status of all field-replaceable units Analyze storage-system logs You download the NST from a link on the CLARiiON Tools page of the Powerlink website to a Windows management station that is connected to the storage-system s management ports. If you do not have a Windows management station, your service provider may run this wizard. To access the CLARiiON Tools page, use the Navigator drop-down menu at the top right of the Powerlink home page. 1. If you do not have the Navisphere Service Taskbar running: a. Download and install the Navisphere Service Taskbar from the CLARiiON Tools page on the Powerlink website to a Windows management station that is connected to the storage-system s management ports. To access the CLARiiON Tools page, use the Navigator drop-down menu at the top right of the Powerlink home page. b. Start the Navisphere Service Taskbar by doing one of the following: Click the Navisphere Service Taskbar icon on your desktop, or Select Start > Programs > EMC > Navisphere > Navisphere Service Taskbar version > Navisphere Service Taskbar version 3 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

31 2. In the taskbar s navigation pane, select the Hardware Maintenance tab. 3. In the tab s navigation pane, select Verify Storage System. 4. If the Navisphere Connection screen opens: a. Enter the IP address for an SP in the storage system. b. Click Connect. c. Enter your Navisphere login username, password, and scope (global, local, or LDAP) and click OK. Once you connect to a storage system, you do not need to reconnect to it again during the NST session. To connect to a different storage system, you must disconnect the current storage system by selecting File > Disconnect. 5. Review the report that the wizard generates, and if it lists any problems try to resolve them. For assistance in resolving any problems, see the troubleshooting flowcharts for the storage system on the CLARiiON Tools page of the Powerlink website. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 31

32 Setting storage-system failover values for the server initiators with Navisphere Manager Use the Navisphere Manager Failover Setup Wizard to set the storage-sytem failover values for all HBA initiators belonging to the server: 1. Start Navisphere Manager for the storage system. 2. In the Tools menu, click Failover Setup Wizard. 3. In the Start Wizard dialog box, read the introduction, and then click Next. 4. In the Select Host dialog box, select the server you just connected to the storage system, and click Next. 5. In the Select Storage Systems dialog box, select the storage system, and click Next. 6. In the Specify Settings dialog box, set the following values for the type of software running on the server: IMPORTANT If you enter incorrect values the storage system could become unmanageable and unreachable by the server, and the server s failover software could stop operating correctly. For a Windows server with native multipath failover, set: Initiator Type to CLARiiON Open Array CommPath to Enabled Failover Mode to 4 7. In Configuration Summary, review the configuration and all settings. 8. If the settings are correct, click Next, and if the settings are incorrect, click Back until return to the dialog box in which you need to re-enter the correct values. If you clicked Next, the wizard displays a confirmation dialog box. 9. In the confirmation dialog box, click Yes. 32 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

33 Thewizarddisplaysasummaryofthesuccessoftheoperationto set the values for the storage system. 1. If the operation failed, rerun the Failover Setup Wizard again. 11. When the operation is successful, click Finish to close the wizard. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 33

34 Verifying your high-availability Fibre Channel configuration Read this section for any Fibre Channel configuration. Use the server high-availability feature in the Navisphere Server Utility to verify the following for each server in a high-availability configuration with the storage system: Your Fibre Channel configuration is highly available (that is, each Fibre Channel HBA has at least one active path to each storage processor). Path management software is installed and running on the server. Before you start If the Navisphere Server Utility is not installed on the server, locate the server support CD, which shipped with the storage system. Starting the Navisphere Server Utility on a Windows server 1. Run the Navisphere Server Utility by selecting Start > Programs >EMC>Navisphere > Navisphere Server Utility or Start > All Programs > EMC > Navisphere > Navisphere Server Utility. 2. Select your language, if prompted for it. A text-based version of the utility is installed automatically when you install the utility. To start the text-based version, at a command prompt enter cd C:\Program Files\EMC\Navisphere Server Utility or cd C:\Program Files (x86)\emc\navisphere Server Utility, then enter NaviServerUtilCLI.exe. Starting the Navisphere Server Utility on a Windows server from the CD 1. Log in to the Windows server as the administrator or someone who has administrative privileges. 2. In the server s drive, insert the server support CD, which shipped with the storage system. 34 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

35 The server support menu opens. If you do not see the server support menu, open it: From the Windows taskbar, select: Start > Run In the Run dialog box, enter: drive:\locales\en_us\start.html where drive is the letter for the CD drive. Click OK. 3. From the main menu select Run Products from CD. The RUN PRODUCTS page opens. 4. Select Navisphere Server Utility. Using the server utility to verify your high-availability configuration 1. In the Navisphere Server Utility dialog box, select Verify Server High-Availability. 2. Select Valid Server Configuration only. 3. In the Select Host Type screen, select Local host and click Next. 4. In the Select Report Directory screen, select the location where the high availability status report should be saved. Click Next. 5. Read the summary and if it is accurate, click Next to generate the report. If not, click Back to return to the screen where you need to correct the data. The utility determines if the server is configured for high availability by verifying that the server has at least one connection path to each storage system SP, and that PowerPath or some other failover software, such as DMP, is running. It does not detect native failover software, such as Windows Server 28 native failover. 6. Review and resolve any issues reported under the Issues tab of the generated report before continuing with the installation process. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 35

36 Configuring an existing storage system Read this section if you are configuring an existing storage system. An existing storage system is one that was already connected to a server when you started the installation procedure. Configure the storagesystemwithnavispheremanager. To configure a storagesystemwithnavispheremanager,useeitherthe Navisphere taskbar wizards or the Storage tree options of Navisphere Manager. Before you start You need the completed storage-system disk information worksheet from the storage-system configuration planning guide or planning worksheets document. You can generate this guide using the user-customized documentation link from the CLARiiON Tools page on the Powerlink website. To access the CLARiiON Tools page, use the Navigator drop-down menu at the top right of the Powerlink home page. Allocating storage to an existing storage system with the Navisphere taskbar wizards Starting with UI version xx, the Allocate wizard has been renamed to Provision wizard. Like the Allocate wizard, use the Provision wizard, found in the Navisphere Manager taskbar, to create storage system storage and provide server access to this storage. You allocate storage with the Navisphere Provision or Allocate wizard only to additional servers, that is, servers connected to Fibre Channel ports. You cannot use this wizard to allocate storage to a Celerra host. 1. Locate your completed storage-system disk information worksheet so you can refer to it in the steps that follow. 2. In the Navisphere taskbar, click the Storage Management tab. 3. If you need additional LUNs for the server, use the Provision or Allocate wizard on the Storage Management tab to create them. 36 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

37 4. If you want to assign existing LUNs to the server, use the Assign wizard on the Storage Management tab to assign them. For high availability, a host can connect to only one storage group per storage system at a time. If you connect a host that is already connected to another storage group, the host will disconnect from the first storage group. When you disconnect a host from a storage group, and then connect it to a different storage group, the host can no longer perform I/O to the first storage group. 5. Verify that a server was assigned to the storage group. If you know the name of the storage group in which the LUNs reside In the Navisphere Manager Storage tree: Click the icon for the storage system with the storage group whose server connection you want to verify. Click the Storage Groups icon. Click the icon for the storage group. If the server is assigned to a storage group, an icon for that server appears under the storage group icon. If you know the name of the server to which the storage group is assigned In the Navisphere Manager Hosts tree: Click the icon for the server to which you assigned the LUNs and whose server connections you want to verify. Click the LUNs icon and confirm that the new LUNs are listed. If you do not see any of the LUNs you just created, you may not have selected the Assign LUNs to a server option in the Select Servers page of the Provision wizard. You can use the Assign wizard to assign the LUNs to a server. Allocating storage to an existing storage system with the storage tree options 1. Locate your completed storage-system disk information worksheet so you can refer to it in the steps that follow. 2. Create additional traditional LUNs on new or existing RAID groups. Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover 37

38 To create traditional LUNs on RAID Groups In the Navisphere Manager Storage tree, depending on the UI and FLARE version that you identified earlier, right-click the storage-system icon and do one of the following: Click Storage Pools Operations > Create LUNs ;createanew RAID group or select an existing one; create new LUNs on the RAID group. Click Bind LUN; create a new RAID group or select an existing one; bind LUNs on the RAID group For details on creating traditional LUNs and RAID groups, use the Navisphere Manager help. 3. Create any additional storage groups that you need for the server. To create storage groups In the Navisphere Manager tree, right-click the icon for the storage system, and click Create Storage Groups. Fordetails on creating storage groups, use the Navisphere Manager help 4. Add the new LUNs you created to new or existing storage groups. Adding a LUN to a storage group makes the LUN accessible to the servers connected to the storage group. If a LUN is placed in more than one storage group, all servers in those storage groups must be in a cluster configuration. To add LUNs to storage groups Right-click the icon for the storage group to which you want to add LUNs, and click Select LUNs. For details on adding LUNs to storage groups, use the Navisphere Manager help. 5. Assign a server to a new or existing storage group. To assign servers to storage groups In the Navisphere Manager tree, right-click the icon for the storage group to which you want to assign a server, and then click Connect Hosts. Fordetailson assigning servers to storage groups, use the Navisphere Manager help. 38 Connecting a CX4-48 Storage System in a Fibre Channel Direct or Switch Configuration with a Microsoft Windows Server with Native Multipath Failover

EMC CLARiiON Server Support Products for Windows INSTALLATION GUIDE P/N REV A05

EMC CLARiiON Server Support Products for Windows INSTALLATION GUIDE P/N REV A05 EMC CLARiiON Server Support Products for Windows INSTALLATION GUIDE P/N 300-002-038 REV A05 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright 2004-2006

More information

EMC CLARiiON CX3-20f Setup Guide P/N REV. A02

EMC CLARiiON CX3-20f Setup Guide P/N REV. A02 EMC CLRiiON CX3-20f Setup Guide P/N 300-004-207 REV. 02 Notice Copyright 2006-2007 EMC Corporation. ll rights reserved. Published July, 2007 EMC believes the information in this publication is accurate

More information

EMC CLARiiON Server Support Products for Windows Servers Installation Guide

EMC CLARiiON Server Support Products for Windows Servers Installation Guide EMC CLARiiON Server Support Products for Windows Servers Installation Guide P/N 300 002 038, Revision A14 October 3, 2008 This guide describes how to install and remove the EMC Navisphere Host Agent, Navisphere

More information

Release Notes P/N REV A03 January 3, 2006

Release Notes P/N REV A03 January 3, 2006 Sun StorEdge Traffic Manager for CLARiiON Release Notes P/N 300-002-978 REV A03 January 3, 2006 These release notes contain supplemental information about Sun StorEdge Traffic Manager for CLARiiON storage

More information

CLARiiON CX3-40 Setup Guide P/N REV. A03

CLARiiON CX3-40 Setup Guide P/N REV. A03 CLRiiN CX3-40 Setup Guide P/N 300-003-512 REV. 03 Notice Copyright 2006 EMC Corporation. ll rights reserved. Published ugust, 2006 EMC believes the information in this publication is accurate as of its

More information

EMC SAN Copy Command Line Interfaces

EMC SAN Copy Command Line Interfaces EMC SAN Copy Command Line Interfaces REFERENCE P/N 069001189 REV A13 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright 2006-2008 EMC Corporation. All

More information

Installing PowerPath. Invisible Body Tag

Installing PowerPath. Invisible Body Tag Invisible Body Tag 1 Installing PowerPath This chapter describes procedures to install and upgrade EMC PowerPath software on a Windows host. This chapter includes the following sections: Before you install...

More information

EMC SAN Copy. Command Line Interface (CLI) Reference P/N REV A15

EMC SAN Copy. Command Line Interface (CLI) Reference P/N REV A15 EMC SAN Copy Command Line Interface (CLI) Reference P/N 069001189 REV A15 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright 2006-2010 EMC Corporation.

More information

AX150-Series Upgrading FLARE Operating Environment Software March 28, 2006

AX150-Series Upgrading FLARE Operating Environment Software March 28, 2006 AX150-Series Upgrading FLARE Operating Environment Software March 28, 2006 This document describes how to upgrade your AX150 FLARE Operating Environment (OE) - the storage-system software that includes

More information

EMC SAN Copy Command Line Interface P/N REV A14 EMC Corporation Corporate Headquarters: Hopkinton, MA

EMC SAN Copy Command Line Interface P/N REV A14 EMC Corporation Corporate Headquarters: Hopkinton, MA EMC SAN Copy Command Line Interface P/N 069001189 REV A14 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright 2006-2009 EMC Corporation. All rights reserved.

More information

Service Description: Dell EMC Maintenance Service Standard

Service Description: Dell EMC Maintenance Service Standard Dell Services Service Description: Dell EMC Maintenance Service Standard Service SKUs See Appendix A for further information on T1, T2 and T3 Standard Maintenance. Service Overview This service provides

More information

Service Description Remote Yearly Maintenance of a Dell EMC Storage Array Environment

Service Description Remote Yearly Maintenance of a Dell EMC Storage Array Environment Service Description Remote early Maintenance of a Dell EMC Storage Array Environment Service SKUs See Appendix A for further information on T1, T2 and T3 Standard Maintenance. Service Overview This service

More information

Disk and FLARE OE Matrix P/N REV A17 February 22, 2011

Disk and FLARE OE Matrix P/N REV A17 February 22, 2011 EMC CX4 Series Storage Systems Disk and FLARE OE Matrix P/N 300-007-437 REV A17 February 22, 2011 To function properly, disks in an EMC CLARiiON system require that each storage processor run minimum revisions

More information

Dell EMC Unity Family

Dell EMC Unity Family Dell EMC Unity Family Version 4.2 Configuring Hosts to Access Fibre Channel (FC) or iscsi Storage 302-002-568 REV 03 Copyright 2016-2017 Dell Inc. or its subsidiaries. All rights reserved. Published July

More information

EMC CLARiiON iscsi Server Setup Guide for VMware ESX Server 3i and 3.x Hosts

EMC CLARiiON iscsi Server Setup Guide for VMware ESX Server 3i and 3.x Hosts EMC CLARiiON iscsi Server Setup Guide for VMware ESX Server 3i and 3.x Hosts P/N 300 003 807, Revision A06 May 30, 2008 This document describes how to configure iscsi initiator ports and how to set up

More information

Dialogic Voice Board & Driver Installation

Dialogic Voice Board & Driver Installation 1 Dialogic Voice Board & Driver Installation The following steps are for installing the following Dialogic Voice Board-Models: D/4PCI, D/41JCT-LS, D/120JCT-LS, D/240PCI-T1, and other PCI boards. These

More information

Release Notes P/N Rev A02

Release Notes P/N Rev A02 EMC PowerPath for Windows Version 4.6 and Point Releases Release Notes P/N 300-003-931 Rev A02 November 27, 2006 These release notes contain information about features, system requirements, known problems,

More information

Technical Note P/N REV A01 November 24, 2008

Technical Note P/N REV A01 November 24, 2008 AIX Native MPIO for CLARiiON Technical Note P/N 300-008-486 REV A01 November 24, 2008 This technical note contains supplemental information about AIX Native MPIO for CLARiiON storage systems. Technical

More information

Release Notes P/N REV A01 August 11, 2010

Release Notes P/N REV A01 August 11, 2010 EMC Unisphere Analyzer Version 1.0.0 Release Notes P/N 300-011-113 REV A01 August 11, 2010 These release notes contain supplemental information about EMC Unisphere Analyzer, version 1.0.0. Topics include:

More information

Introduction to the CX700

Introduction to the CX700 Engineering White Paper Introduction to the CX700 Abstract This white paper introduces the full 2 Gb architecture and functionality of the CX700 storage system. It compares the features and capabilities

More information

EMC Celerra NS-120 System (Single Blade) Installation Guide

EMC Celerra NS-120 System (Single Blade) Installation Guide EMC Celerra NS- System (Single Blade) Installation Guide P/N 3-7-88 Rev A4 EMC believes the information in this publication is accurate as of its publication date. The information is subject to change

More information

Dell EMC SC Series Storage with SAS Front-end Support for VMware vsphere

Dell EMC SC Series Storage with SAS Front-end Support for VMware vsphere Dell EMC SC Series Storage with SAS Front-end Support for VMware vsphere Abstract This document describes how to configure VMware vsphere hosts equipped with supported SAS HBAs to access SAN storage on

More information

EMC Fibre Channel with QLogic Host Bus Adapters in the Windows Environment

EMC Fibre Channel with QLogic Host Bus Adapters in the Windows Environment EMC Fibre Channel with QLogic Host Bus Adapters in the Windows Environment P/N 300-001-164 REV A07 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508 -435-1000 www.emc.com Copyright

More information

EMC CLARiiON Server Support Products for AIX Server Installation Guide

EMC CLARiiON Server Support Products for AIX Server Installation Guide EMC CLARiiON Server Support Products for AIX Server Installation Guide P/N 300 002 044, Revision A08 January 16, 2007 This guide describes how to install and remove the Navisphere Host Agent, Navisphere

More information

Boot and Network Configuration Deployment using Server Template with Dell EMC OpenManage Essentials (OME)

Boot and Network Configuration Deployment using Server Template with Dell EMC OpenManage Essentials (OME) Boot and Network Configuration Deployment using Server Template with Dell EMC OpenManage Essentials (OME) Dell EMC Engineering February 2018 A Dell EMC Technical White Paper Revisions Date August 2017

More information

WHITE PAPER Citrix XenServer and EMC CLARiiON CX4 Series Citrix XenServer and EMC CLARiiON CX4 Series Configuration Guide

WHITE PAPER Citrix XenServer and EMC CLARiiON CX4 Series Citrix XenServer and EMC CLARiiON CX4 Series Configuration Guide WHITE PAPER Citrix XenServer and EMC CLARiiON CX4 Series Citrix XenServer and EMC CLARiiON CX4 Series Configuration Guide www.citrix.com Contents Introduction...4 Citrix XenServer for Enterprise ready

More information

Release Notes P/N REV A01 February 23, 2006

Release Notes P/N REV A01 February 23, 2006 EMC AX-Series Navisphere SP Agent Version 6.20.0.3.12 for FLARE OE 02.20.yyy Release Notes P/N 300-003-516 REV A01 February 23, 2006 These release notes contain supplemental information about EMC Navisphere

More information

Before you begin 1. Create an EMC Support account on the EMC online support website (support.emc.com).

Before you begin 1. Create an EMC Support account on the EMC online support website (support.emc.com). VNX-F Series Software Setup Guide Before you begin 1. Create an EMC Support account on the EMC online support website (support.emc.com). 2. Configure your server environment. Reference the E-Lab Navigator

More information

Sound Card Installation for Windows 95/98

Sound Card Installation for Windows 95/98 Sound Card Installation for Windows 95/98 Hardware Installation 1. Shut down Windows and power down system. Unplug power cable from the system. 2. Remove screws and open system enclosure. 3. Remove static

More information

EMC Celerra NS-120 System (Dual Blade) Installation Guide

EMC Celerra NS-120 System (Dual Blade) Installation Guide EMC Celerra NS- System (Dual Blade) Installation Guide P/N -7-88 Rev A EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without

More information

Setup for Microsoft Cluster Service Update 1 Release for ESX Server 3.5, ESX Server 3i version 3.5, VirtualCenter 2.5

Setup for Microsoft Cluster Service Update 1 Release for ESX Server 3.5, ESX Server 3i version 3.5, VirtualCenter 2.5 Setup for Microsoft Cluster Service Update 1 Release for ESX Server 3.5, ESX Server 3i version 3.5, VirtualCenter 2.5 Setup for Microsoft Cluster Service Setup for Microsoft Cluster Service Revision: 041108

More information

Deploying the 60TB Data Warehouse Fast Track Reference Architecture for Microsoft SQL Server 2016 using Dell EMC PowerEdge R730 and SC5020

Deploying the 60TB Data Warehouse Fast Track Reference Architecture for Microsoft SQL Server 2016 using Dell EMC PowerEdge R730 and SC5020 Deploying the 60TB Data Warehouse Fast Track Reference Architecture for Microsoft SQL Server 2016 using Dell EMC PowerEdge R730 and SC5020 Deployment guide with step-by-step instructions Abstract This

More information

Deploying HP SIM 6.x on MSCS clusters on Windows 2008 with SQL Server 2008 SP1 White Paper

Deploying HP SIM 6.x on MSCS clusters on Windows 2008 with SQL Server 2008 SP1 White Paper Deploying HP SIM 6.x on MSCS clusters on Windows 2008 with SQL Server 2008 SP1 White Paper Table of Contents Abstract... 2 Introduction... 2 System infrastructure... 3 Storage configuration... 3 IP addresses...

More information

Dell Storage Center OS Version 7 Software Update Guide

Dell Storage Center OS Version 7 Software Update Guide Dell Storage Center OS Version 7 Software Update Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates

More information

EMC CLARiiON iscsi Server Setup Guide for HP-UX

EMC CLARiiON iscsi Server Setup Guide for HP-UX EMC CLARiiON iscsi Server Setup Guide for HP-UX P/N 300 005 050 Revision A03 May 30, 2008 This document describes how to configure iscsi initiator ports and how to set up iscsi security on a server connected

More information

Fibre Channel Specialist FC Lab

Fibre Channel Specialist FC Lab Fibre Channel Specialist FC 201.01 Lab Getting to Know Your SAN Allotted time for this lab: 10 minutes Objective: This exercise is to introduce the lab equipment and methodology that will be used for the

More information

ProLiant CL380 Software User Guide. Fourth Edition (December 2000) Part Number Compaq Computer Corporation

ProLiant CL380 Software User Guide. Fourth Edition (December 2000) Part Number Compaq Computer Corporation ProLiant CL380 Software User Guide Fourth Edition (December 2000) Part Number 157839-004 Compaq Computer Corporation Notice 2000 Compaq Computer Corporation COMPAQ and the Compaq logo, Compaq Insight Manager,

More information

EMC ControlCenter Navisphere Security ADMINISTRATOR S GUIDE. Version 6.X P/N REV A04

EMC ControlCenter Navisphere Security ADMINISTRATOR S GUIDE. Version 6.X P/N REV A04 EMC ControlCenter Navisphere Security Version 6.X ADMINISTRATOR S GUIDE P/N 069001124 REV A04 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 (800) 424-EMC2 http://www.emc.com Copyright

More information

x10sure 3.2 One to one recover after repair

x10sure 3.2 One to one recover after repair x10sure 3.2 One to one recover after repair 1 1:1 WITH EXTERNAL STORAGE 2 1.1 After power failure etc. 2 1.2 After repair 2 1.3 After replacement of the failed node 3 1.3.1 Boot device via FC 3 1.3.2 Boot

More information

Deploying the 8TB Data Warehouse Fast Track Reference Architecture for Microsoft SQL Server 2017 using Dell EMC PowerEdge R740 and SCv3020

Deploying the 8TB Data Warehouse Fast Track Reference Architecture for Microsoft SQL Server 2017 using Dell EMC PowerEdge R740 and SCv3020 Deploying the 8TB Data Warehouse Fast Track Reference Architecture for Microsoft SQL Server 2017 using Dell EMC PowerEdge R740 and SCv3020 Deployment guide with step-by-step instructions Abstract This

More information

HS22, HS22v, HX5 Boot from SAN with QLogic on IBM UEFI system.

HS22, HS22v, HX5 Boot from SAN with QLogic on IBM UEFI system. HS22, HS22v, HX5 Boot from SAN with QLogic on IBM UEFI system. Martin Gingras Product Field Engineer, Canada mgingras@ca.ibm.com Acknowledgements Thank you to the many people who have contributed and reviewed

More information

Release Notes P/N REV A05 July 7, 2006

Release Notes P/N REV A05 July 7, 2006 EMC CX-Series SAN Copy for FLARE OE Version 02.19.yyy Release Notes P/N 300-002-755 REV A05 July 7, 2006 These release notes contain supplemental information about the following EMC products: EMC SAN Copy

More information

EMC Unity Family EMC Unity All Flash, EMC Unity Hybrid, EMC UnityVSA

EMC Unity Family EMC Unity All Flash, EMC Unity Hybrid, EMC UnityVSA EMC Unity Family EMC Unity All Flash, EMC Unity Hybrid, EMC UnityVSA Version 4.0 Configuring Hosts to Access VMware Datastores P/N 302-002-569 REV 01 Copyright 2016 EMC Corporation. All rights reserved.

More information

VTRAK E-Class/J-Class Quick Start Guide

VTRAK E-Class/J-Class Quick Start Guide VTRAK E-Class/J-Class Quick Start Guide Version.0 Firmware 3.9 008 Promise Technology, Inc. All Rights Reserved. VTrak Quick Start Guide About This Guide This Quick Start Guide shows you how to install

More information

Drive and FLARE OE Matrix

Drive and FLARE OE Matrix EMC CX4 Series Storage Systems and FLARE OE Matrix P/ N 300-007-437 To function properly, drives in an EMC CLARiiON system require that each storage processor run minimum s of the FLARE Operating Environment

More information

SANsurfer iscsi HBA Application User s Guide

SANsurfer iscsi HBA Application User s Guide Q Simplify SANsurfer iscsi HBA Application User s Guide Management Application for SANsurfer iscsi Host Bus Adapters IS0054602-00 A Page i SANsurfer iscsi HBA Application User s Guide Management Application

More information

Direct Attached Storage

Direct Attached Storage , page 1 Fibre Channel Switching Mode, page 1 Configuring Fibre Channel Switching Mode, page 2 Creating a Storage VSAN, page 3 Creating a VSAN for Fibre Channel Zoning, page 4 Configuring a Fibre Channel

More information

Installing the Cisco Unified MeetingPlace Web Server Software

Installing the Cisco Unified MeetingPlace Web Server Software Installing the Cisco Unified MeetingPlace Web Server Software Release 8.5 Revised: 2/19/13 : Install the Application Server (which includes the Software Media Server) : Install the Hardware Media Server

More information

MIGRATING TO DELL EMC UNITY WITH SAN COPY

MIGRATING TO DELL EMC UNITY WITH SAN COPY MIGRATING TO DELL EMC UNITY WITH SAN COPY ABSTRACT This white paper explains how to migrate Block data from a CLARiiON CX or VNX Series system to Dell EMC Unity. This paper outlines how to use Dell EMC

More information

Vendor: EMC. Exam Code: E Exam Name: CLARiiON Installation and Troubleshooting Specialist. Version: Demo

Vendor: EMC. Exam Code: E Exam Name: CLARiiON Installation and Troubleshooting Specialist. Version: Demo Vendor: EMC Exam Code: E20-611 Exam Name: CLARiiON Installation and Troubleshooting Specialist Version: Demo Question No : 1 On a CLARiiON CX4-480 array what is the maximum number of drives supported on

More information

EMC VNXe. Replacing a link control card in a 12-slot disk-array enclosure REV 02. July, 2015

EMC VNXe. Replacing a link control card in a 12-slot disk-array enclosure REV 02. July, 2015 EMC VNXe Replacing a link control card in a 12-slot disk-array enclosure 302-000-216 REV 02 July, 2015 This document describes how to replace a link control card (LCC) in a 12-slot disk-array enclosure

More information

EMC Fibre Channel with QLogic Host Bus Adapters in the NetWare Environment

EMC Fibre Channel with QLogic Host Bus Adapters in the NetWare Environment EMC Fibre Channel with QLogic Host Bus Adapters in the NetWare Environment P/N 300-001-162 REV A03 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508 -435-1000 www.emc.com Copyright

More information

Jonas Activity Management Technical Deployment Guide

Jonas Activity Management Technical Deployment Guide Jonas Activity Management Technical Deployment Guide [] Software for Life Jonas Activity Management Technical Deployment Guide, Jonas, Jonas Software, Software for Life, and Gary Jonas Computing are registered

More information

HP StorageWorks QLogic host bus adapters for x86 and x64 Linux and Windows and x86 NetWare release notes

HP StorageWorks QLogic host bus adapters for x86 and x64 Linux and Windows and x86 NetWare release notes HP StorageWorks QLogic host bus adapters for x86 and x64 Linux and Windows and x86 NetWare release notes Part number: AV-RSBNV-TE Twentieth edition: January 2007 Description These release notes contain

More information

Getting Started. Overview of the Splash G3535

Getting Started. Overview of the Splash G3535 Getting Started This Getting Started explains how to unpack, install, and connect the Splash G3535 Color Server. After completing the tasks outlined in this guide, you can explore the features of the Splash

More information

Technical Brief: How to Configure NPIV on VMware vsphere 4.0

Technical Brief: How to Configure NPIV on VMware vsphere 4.0 Technical Brief: How to Configure NPIV on VMware vsphere 4.0 Provides step-by-step instructions on how to configure NPIV on VMware vsphere 4.0 in a Brocade fabric. Leveraging NPIV gives the administrator

More information

Manage the Capability Catalog in Cisco UCS Manager

Manage the Capability Catalog in Cisco UCS Manager Manage the Capability Catalog in Cisco UCS Manager Capability Catalog, on page 1 Activating a Capability Catalog Update, on page 2 Verifying that the Capability Catalog Is Current, on page 3 Viewing a

More information

Windows Host Utilities Installation and Setup Guide

Windows Host Utilities Installation and Setup Guide IBM System Storage N series Windows Host Utilities 6.0.1 Installation and Setup Guide GC52-1295-06 Table of Contents 3 Contents Preface... 7 Supported features... 7 Websites... 7 Getting information,

More information

Dell DL4300 Appliance Release Notes

Dell DL4300 Appliance Release Notes Dell DL4300 Appliance Release Notes Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential

More information

IBM TotalStorage DS300 and DS400 Quick Installation Guide

IBM TotalStorage DS300 and DS400 Quick Installation Guide IBM TotalStorage DS300 and DS400 Quick Installation Guide Before using this information and the product it supports, read the IBM Statement of Limited Warranty in the IBM TotalStorage DS300 and DS400 Warranty

More information

VMware ESX Server Software for Dell PowerEdge Servers. Deployment Guide. support.dell.com

VMware ESX Server Software for Dell PowerEdge Servers. Deployment Guide.   support.dell.com VMware ESX Server 2.5.1 Software for Dell PowerEdge Servers Deployment Guide www.dell.com support.dell.com VMware ESX Server 2.5.1 Software for Dell PowerEdge Servers Deployment Guide www.dell.com support.dell.com

More information

READ ME FIRST. Windows NT. *DSL Equipment Installation Guide: Efficient Networks 5260

READ ME FIRST. Windows NT. *DSL Equipment Installation Guide: Efficient Networks 5260 READ ME FIRST Windows NT *DSL Equipment Installation Guide: Efficient Networks 5260 *Digital Subscriber Line Part Number: 5260NT02A Version 1.2-A. Table of Contents Follow Steps 1 through 8 to complete

More information

ProLiant Cluster HA/F500 for Enterprise Virtual Array Introduction Software and Hardware Pre-Checks Gathering Information...

ProLiant Cluster HA/F500 for Enterprise Virtual Array Introduction Software and Hardware Pre-Checks Gathering Information... Installation Checklist HP ProLiant Cluster F500 for Enterprise Virtual Array 4000/6000/8000 using Microsoft Windows Server 2003, Enterprise Edition Stretch Cluster May 2005 Table of Contents ProLiant Cluster

More information

Restoring an SP Boot Image

Restoring an SP Boot Image AX100-Series Restoring an SP Boot Image Revision A01 June 9, 2004 This document explains how to restore an SP s boot image. Read it when an SP does not start properly and its fault light blinks four times

More information

BeTwin ES User Manual

BeTwin ES User Manual THINSOFT PTE LTD 23, Tai Seng Drive, #06-00, Singapore 535224 - Fax (65) 6289-7308 www.thinsoftinc.com BeTwin ES User Manual Document Version 2.0 1 BeTwin ES User Manual Copyright 2007-2013 ThinSoft Pte

More information

Installing and Configuring Cisco Unified Real-Time Monitoring Tool

Installing and Configuring Cisco Unified Real-Time Monitoring Tool CHAPTER 2 Installing and Configuring Cisco Unified Real-Time Monitoring Tool You can install Cisco Unified Real-Time Monitoring Tool (RTMT), which works for resolutions 800*600 and above, on a computer

More information

Table Of Contents. About the EMC Disk Library...1. Hardware and software components...1. EMC Disk Library configuration...3

Table Of Contents. About the EMC Disk Library...1. Hardware and software components...1. EMC Disk Library configuration...3 EDL printed help Table Of Contents About the EMC Disk Library...1 Introduction to the EMC Disk Library...1 Hardware and software components...1 EMC Disk Library configuration...3 About the EMC Disk Library

More information

How to integrate HP StorageWorks tape libraries into a SAN based backup environment.

How to integrate HP StorageWorks tape libraries into a SAN based backup environment. HP World Chicago August 16 20 2004 How to integrate HP StorageWorks tape libraries into a SAN based backup environment. Presentation 1 (20 mins) : HP Extended Tape Library Architecture (ETLA) Overall Lab

More information

READ ME FIRST Windows 95/98/Me/2000

READ ME FIRST Windows 95/98/Me/2000 READ ME FIRST Windows 95/98/Me/2000 *DSL Equipment Installation Guide: Efficient Networks 5260 *Digital Subscriber Line Part Number: 52609x02 Version 1.2-A Table of Contents Follow Steps 1 through 8 to

More information

EMC NetWorker Module for SnapImage Release 2.0 Microsoft Windows Version

EMC NetWorker Module for SnapImage Release 2.0 Microsoft Windows Version EMC NetWorker Module for SnapImage Release 2.0 Microsoft Windows Version Installation and Administration Guide P/N 300-007-130 REV A01 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000

More information

VMware Site Recovery Manager with EMC CLARiiON CX3 and MirrorView/S

VMware Site Recovery Manager with EMC CLARiiON CX3 and MirrorView/S VMware Site Recovery Manager with EMC CLARiiON CX3 and MirrorView/S Implementation Guide EMC Global Solutions Centers EMC Corporation Corporate Headquarters Hopkinton MA 01748-9103 1.508.435.1000 www.emc.com

More information

EMC CLARiiON Asymmetric Active/Active Feature (ALUA)

EMC CLARiiON Asymmetric Active/Active Feature (ALUA) A Detailed Review Abstract This white paper provides an overview of the EMC CLARiiON Asymmetric Active/Active feature. It highlights the configuration, best practices, implementation details of EMC PowerPath,

More information

EMC VNXe. Adding input/output modules to a disk processor enclosure REV 03. July, 2015

EMC VNXe. Adding input/output modules to a disk processor enclosure REV 03. July, 2015 EMC VNXe Adding input/output modules to a disk processor enclosure 302-000-206 REV 03 July, 2015 This document describes how to add input/output (I/O) modules to a DPE (disk processor enclosure). The printed

More information

Deploying the 55TB Data Warehouse Fast Track Reference Architecture for Microsoft SQL Server 2014 using PowerEdge R730 and Dell Storage SC4020

Deploying the 55TB Data Warehouse Fast Track Reference Architecture for Microsoft SQL Server 2014 using PowerEdge R730 and Dell Storage SC4020 Deploying the 55TB Data Warehouse Fast Track Reference Architecture for Microsoft SQL Server 2014 using PowerEdge R730 and Dell Storage SC4020 Dell Storage Engineering December 2015 A Dell Deployment and

More information

GB of cache memory per controller to DS4800 controllers with 8 GB of cache memory per controller.

GB of cache memory per controller to DS4800 controllers with 8 GB of cache memory per controller. IBM System Storage DS4800 Controller Cache Upgrade Kit Instructions Attention: IBM has renamed some FAStT family products. FAStT EXP100 has been renamed DS4000 EXP100, FAStT EXP700 has been renamed DS4000

More information

Dell Host Bus Adaptor User s Guide

Dell Host Bus Adaptor User s Guide Dell Host Bus Adaptor User s Guide Regulatory Model: UCSE 900 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION

More information

Dell EMC Host Bus Adapter User's Guide

Dell EMC Host Bus Adapter User's Guide Dell EMC Host Bus Adapter User's Guide HBA330 and External 12 Gbps SAS HBA Regulatory Model: UCSE 900, UCSF-1000, UCSN-1000 Notes, cautions, and warnings NOTE: A NOTE indicates important information that

More information

Installing and Configuring for Linux

Installing and Configuring for Linux SANtricity 11.40 Installing and Configuring for Linux Power Guide for Advanced Users September 2017 215-11889_A0 doccomments@netapp.com Table of Contents 3 Contents Deciding whether to use this Power

More information

HP Supporting the HP ProLiant Storage Server Product Family.

HP Supporting the HP ProLiant Storage Server Product Family. HP HP0-698 Supporting the HP ProLiant Storage Server Product Family https://killexams.com/pass4sure/exam-detail/hp0-698 QUESTION: 1 What does Volume Shadow Copy provide?. A. backup to disks B. LUN duplication

More information

Best Practices for deploying VMware ESX 3.x and 2.5.x server with EMC Storage products. Sheetal Kochavara Systems Engineer, EMC Corporation

Best Practices for deploying VMware ESX 3.x and 2.5.x server with EMC Storage products. Sheetal Kochavara Systems Engineer, EMC Corporation Best Practices for deploying VMware ESX 3.x and 2.5.x server with EMC Storage products Sheetal Kochavara Systems Engineer, EMC Corporation Agenda Overview of EMC Hardware and Software Best practices with

More information

VMware vcenter Site Recovery Manager 4.1 Evaluator s Guide EVALUATOR'S GUIDE

VMware vcenter Site Recovery Manager 4.1 Evaluator s Guide EVALUATOR'S GUIDE VMware vcenter Site Recovery Manager 4.1 EVALUATOR'S GUIDE Table of Contents. Getting Started.... 3 About VMware vcenter Site Recovery Manager.... 3 About This Guide.... 3 Intended Audience.... 3 Assumptions....

More information

Upgrading the MSA1000 for Enhanced Features

Upgrading the MSA1000 for Enhanced Features White Paper December 2002 Prepared by: Network Storage Solutions Hewlett Packard Company Contents Benefits of the MSA1000 Enhancements...1 Prerequisites...3 Environmental Monitoring Unit (EMU) issue:...3

More information

VTRAK E610f, J610s Quick Start Guide

VTRAK E610f, J610s Quick Start Guide VTRAK E60f, J60s Quick Start Guide Version 0.8 008 Promise Technology, Inc. All Rights Reserved. VTrak Quick Start Guide VTrak Setup Task List Task : Unpacking the VTrak (below) Task : Mounting VTrak in

More information

Quick Setup Guide RAID Array 8000/ESA12000 Fibre Channel Storage Subsystem for SGI IRIX

Quick Setup Guide RAID Array 8000/ESA12000 Fibre Channel Storage Subsystem for SGI IRIX Quick Setup Guide RAID Array 8000/ESA12000 Fibre Channel Storage Subsystem for SGI IRIX AA RFBHA TE 387398-001 Before You Begin In this Quick Setup Guide we tell you how to create an initial hardware configuration

More information

Dell EMC PowerVault MD3860f Series Storage Arrays. Deployment Guide

Dell EMC PowerVault MD3860f Series Storage Arrays. Deployment Guide Dell EMC PowerVault MD3860f Series Storage Arrays Deployment Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A

More information

HP StorageWorks SmartStart EVA Storage 3.2 Release Notes

HP StorageWorks SmartStart EVA Storage 3.2 Release Notes HP StorageWorks SmartStart EVA Storage 3.2 Release Notes Part Number: T5505-96034 Second edition: June 2010 Legal and notice information Copyright 2010 Hewlett-Packard Development Company, L.P. Microsoft

More information

Web Console Setup & User Guide. Version 7.1

Web Console Setup & User Guide. Version 7.1 Web Console Setup & User Guide Version 7.1 1 Contents Page Number Chapter 1 - Installation and Access 3 Server Setup Client Setup Windows Client Setup Mac Client Setup Linux Client Setup Interoperation

More information

Serial ATA PCI RAID Quick Installation Guide

Serial ATA PCI RAID Quick Installation Guide Serial ATA PCI RAID Quick Installation Guide Introducing the Serial ATA PCI RAID The Serial ATA PCI RAID is an ultra high-speed two channel Serial ATA controller board for use in Pentium-class computers.

More information

READ ME FIRST Windows 98/ME/2000

READ ME FIRST Windows 98/ME/2000 READ ME FIRST Windows 98/ME/2000 *DSL Equipment Installation Guide: Alcatel Speed Touch PC *Digital Subscriber Line Part Number: AlcatelPC9x02A Version 1.2-A Table of Contents Follow Steps 1 through 7

More information

Data Migration from Dell PS Series or PowerVault MD3 to Dell EMC SC Series Storage using Thin Import

Data Migration from Dell PS Series or PowerVault MD3 to Dell EMC SC Series Storage using Thin Import Data Migration from Dell PS Series or PowerVault MD3 to Dell EMC SC Series Storage using Thin Import Abstract The Thin Import feature of Dell Storage Center Operating System offers solutions for data migration

More information

Dell PowerVault MD3460 Series Storage Arrays Deployment Guide

Dell PowerVault MD3460 Series Storage Arrays Deployment Guide Dell PowerVault MD3460 Series Storage Arrays Deployment Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION

More information

Installing the IBM ServeRAID Cluster Solution

Installing the IBM ServeRAID Cluster Solution Installing the IBM ServeRAID Cluster Solution For IBM Netfinity ServeRAID-4x Ultra160 SCSI Controllers Copyright IBM Corp. 2000 1 2 IBM Netfinity Installing the IBM ServeRAID Cluster Solution Chapter 1.

More information

Installation Guide. Wyse R Class Conversion to WES7. Wyse USB Firmware Tool TM Release Issue: PN: L Rev. B

Installation Guide. Wyse R Class Conversion to WES7. Wyse USB Firmware Tool TM Release Issue: PN: L Rev. B Installation Guide Wyse R Class Conversion to WES7 Wyse USB Firmware Tool TM Release 1.10 Issue: 102910 PN: 883887-18L Rev. B Copyright Notices 2010, Wyse Technology Inc. All rights reserved. This manual

More information

Dell/EMC CX3 Series Oracle RAC 10g Reference Architecture Guide

Dell/EMC CX3 Series Oracle RAC 10g Reference Architecture Guide White Paper Third-party Information Provided to You Courtesy of Dell Dell/EMC CX3 Series Oracle RAC 10g Reference Architecture Guide Abstract This document provides an overview of the architecture of the

More information

HP StorageWorks Booting Windows Server 2003 for Itanium-based systems from a storage area network application notes

HP StorageWorks Booting Windows Server 2003 for Itanium-based systems from a storage area network application notes HP StorageWorks Booting Windows Server 2003 for Itanium-based systems from a storage area network application notes Part number: AA RV22F TE Sixth edition: August 2006 Legal and notice information Copyright

More information

Installing and Configuring Cisco Unified Real-Time Monitoring Tool

Installing and Configuring Cisco Unified Real-Time Monitoring Tool CHAPTER 2 Installing and Configuring Cisco Unified Real-Time Monitoring Tool You can install Cisco Unified Real-Time Monitoring Tool (RTMT), which works for resolutions 800*600 and above, on a computer

More information

Instructions to update Digimax application software (a.k.a. firmware)

Instructions to update Digimax application software (a.k.a. firmware) Instructions to update Digimax application software (a.k.a. firmware) These instructions are for updating the application software from 1.0.0.0, V1.0.1.0, V1.0.2.0, 1.0.3.0 (07093001), & 1.0.3.0 (07110801),

More information

Managing the Capability Catalog in Cisco UCS Manager

Managing the Capability Catalog in Cisco UCS Manager Managing the Capability Catalog in Cisco UCS Manager This chapter includes the following sections: Capability Catalog, page 1 Activating a Capability Catalog Update, page 3 Verifying that the Capability

More information

Appendix A: Metasys Web Access (MWA) Server Installation Guidelines

Appendix A: Metasys Web Access (MWA) Server Installation Guidelines Technical Bulletin Issue Date February 26, 2003 Appendix A: Metasys Web Access (MWA) Server Installation Guidelines Appendix A: Metasys Web Access Server Installation Guidelines...2 Introduction... 2 Detailed

More information

Install Windows 2000 Drivers and Utilities for the Cisco Aironet 340/350 Series Client Adapters

Install Windows 2000 Drivers and Utilities for the Cisco Aironet 340/350 Series Client Adapters Install Windows 2000 Drivers and Utilities for the Cisco Aironet 340/350 Series Client Adapters Document ID: 9214 You need a valid Cisco.com account in order to download Cisco Aironet drivers, firmware,

More information