DriveMaster 2012 vs. DriveMaster 2010

Transcription

1 DriveMaster 2012 vs. DriveMaster 2010 OS Windows 8, Windows 7, Windows Server 2008 Windows P, Windows server 2003, VISTA, Above OSes with x64 support SATA HBA Generic AHCI support Intel ICH5, ICH6, ICH7, ICH8, ICH9, ICH10 SiI3124, 3132, 3531 Marvell 6081 Marvell 61xx series (6121, 6141, 6145) Generic IDE/PATA support HBAs compliant with Sil31xx, Marvell 6081, Marvell 61xx VIA 5324 SAS HBA LSI SAS 1064, 1064E, 1068, 1068E Marvell 6320, 6340, 6440, 6445, 6480, 6485 Adaptec 3405 LSI SAS 1078, 2008, 2108, 9240, 9260, 9211 Marvell 9480, 9485, 9445 ATTO SAS H680 FC HBA LSI FC 929, 919, 949, 939, 949E QLOGIC 2432

2 TCG IEEE1667 OPAL SSC and Enterprise SSC REACTIVATE ACTIVATE update to support new modifications in FeatureSets TPER RESET Direct Payload Manipulation TCG_FTCODE_OFFSET TCG_FTR_NUM/TCG_FEATURE_NUM TCG_GET_BYTETBL_FILE Universal Interface Commands TCG_COMPLIANCE TCG_PTCONE_SEND_E TCG_PTCONE_RECV_E Level 0 Discovery o Single User Mode Feature o DataStore Feature o Multifactor Authorities Feature TCG_GETUIDSTR TCG_GETSTATUSINFO Flexible control TCG_AUTORETRY TCG_AUTOCHECK PROBE SILO PROBE TCG SILO GET SILO CAPABILITIES TRANSFER GET TRANSFER RESULT RESET TPER RESET Universal Interface Commands I1667_SEND/I1667_SEND_MIN I1667_RECV/I1667_RECV_MIN TCG_PTCONE_SEND_E TCG_PTCONE_RECV_E I1667_CHKSPT Get Silo Capabilities I1667_GETSTATUSINFO Flexible control TCG_I1667

3 SATA/ATA DevSleep Control HBA Transition to DevSleep allowed/disabled Invoke DevSleep from HBA Enable/Disable HBA Aggressive DevSleep Set/Retrieve HBA DevSleep Idle Timeout, Assertion Time, Exit Time NCQ AutoSense Support customized timeout control for QEND New variables to retrieve the capabilities of SATA HBA Support Extended Time required for Normal/Enhance Security Erase Unit New Commands for READ LOG (DMA) ET with Current Device Internal Status Log IDENTIFY DEVICE Data Log LBA Status Log NCQ Cmd Error Log NCQ Queue Management Log NCQ Send and Receive Log Phy Event Count Log Power Conditions Log Saved Device Internal Status Log New Commands for SMART READ LOG with Device Statistics Log IDENTIFY DEVICE Data Log Selective Self-test Log Current Device Internal Status Log Device Statistics Log IDENTIFY DEVICE data Log LBA Status Log NCQ Error Log NCQ Q Management Log NCQ Send and Receive Log Phy Event Count Log Power Conditions Log Saved Device Internal Status Log

4 SCSI New Commands ACCESS CONTROL IN ACCESS CONTROL OUT COMPARE AND WRITE ETENDED COPY GET LBA STATUS MANAGEMENT PROTOCOL IN, MANAGEMENT PROTOCOL OUT RECEIVE COPY RESULTS REPORT REFERRALS UNMAP New variables ANCHOR UNMAP Commands Update FORMAT UNIT REPORT TASK MANAGEMENT WRITE BUFFER SET/REPORT IDENTIFYING INFORMATION Inquiry VPD Pages 88h, B0h, B1h, B2h, B3h Mode Sense Pages 03h, 04h, 10h, 15h, 16h, 0AhSubpage02h, 1AhSubpage01h, 1ChSubpage01h-02h Log Sense Pages 08h, 0Ch, 0Dh, 0Eh, 10h, 11h, 15h, 17h, 19h,19hSubpage 01-20h, 2Fh Read Capacity (16) Report Supported Operation Codes

5 GUI Scripts Generic Tabbed view of Windows New layout of toolbars 16 Files history list Menu Link to ULINK Support website Command Control Panel New ATA Features Tab: o Enable/Disable ATA Features as Volatile Write Cache, PUIS, Read Look-ahead, Reverting to power on defaults, Sense Data Reporting; SATA Features as DIPM, SSP, Automatic Partial To Slumber Transition, DevSleep, Asynchronous Notification, etc o Configure the Settings for EPC, APM, WRV, Free-Fall, Transfer Mode, LPS Alignment Error Reporting o Security Commands/Status Add ATA Power Management to ATA Commands Tab Add DevSleep to SATA PHY Tab New in SCSI Primary Commands Tab o Report Op Code o Persistent In/Out o VPDPage/ModePage/LogPage info Update in SCSI Block Commands Tab o Format Unit o Write Buffer o StartStopUnit o Write Same 10/16 New TCG/IEEE1667 Tabs o TCG Level0Discovery, AES_Spt, ComID, PSID_Spt o TCG/IEEE1667 Reset: Stack Reset,Tper Reset o IEEE1667 Probe, TCG Silo Get Silo Capabilities o Host/TPer Properties Set/Retrieval o OPAL Activate/Revert/RevertSP and Current State o Table Contents over AdminSP/LockingSP o Set/Get Data in BYTE table o Authentication/Random Method New customized settings in Customize Dialog TCG Auto Retry TCG Auto Check Port Multiplier Auto Initiation New Scripts ATA\Utils\ATA_DSM ATA\Utils\DeviceInfo SCSI\Utils\DeviceInfo TCG\Utils\TCG_Revert TCG\Sample\I1667_Start_EndSession