BIOS Update Release Notes

Transcription

1 BIOS Update Release Notes PRODUCTS: DH77KC, DH77DF (Standard BIOS) BIOS Version KCH7710H.86A Date: March 29, 2018 Ivy Bridge EFI driver (GOP): Sandy Bridge EFI driver (GOP): Visual BIOS: Updated CPU Microcode (Security Advisory ) BIOS Version - KCH7710H.86A Date: May 13, 2013 Visual BIOS: Fixed issue where enabling Video Optimizations disables Intel Rapid Start Technology. Updated Visual BIOS to version Fixed issue where options to enable and disable USB Legacy are opposite between Intel Integrator Toolkit (ITK) and BIOS setup. Fixed issue where the boot order of USB hard drives connected to USB3.0 ports cannot be changed in ITK. Fixed issue where ITK stops working on Windows 8 Enterprise 32- Bit. BIOS Version KCH7710H.86A Date: March 5, 2013

2 Fixed issue with poor performance of PCI bus. Fixed issue where default memory speed displays incorrectly (1066MHz instead of 1333MHz). Fixed issue with memory Channel A Slot B display in Intel Desktop Utilities (IDU). Fixed issue with secure boot. Fixed issue where sensor threshold s proposed value is mismatched with active value in BIOS after changes are made in IDU. Added Install PK key setup item. BIOS Version KCH7710H.86A Date: January 23, 2013 Fixed issue where certain bootable hard drive is displayed as "Unknown in F10 mode. Added Intel Smart Connect Technology Setup item. BIOS Version KCH7710H.86A Date: December 27, 2012 Fixed issue with certain TV tuner card. BIOS Version KCH7710H.86A Date: December 13, 2012

3 Fixed issue with BIOS recovery. Fixed issue with Secure Boot when non-compliant Legacy video card is installed. Fixed issue where TV tuner card is not recognized. Updated Intel ME 8 firmware to version Updated support for DDR3 1066MhZ memory. Fixed issue where Supervisor Password prompt appears even when chassis intrusion is set to log only. BIOS Version KCH7710H.86A Date: November 23, 2012 ME Firmware: Updated Visual BIOS to version Updated processor support. Fixed issue where system hangs on boot after BIOS update if UEFI Boot is enabled. Fixed issue where the Password Prompt is not required when Chassis Intrusion is set to Log Only, if just the Supervisor Password is installed. Fixed issue with legacy video card when Secure Boot is enabled. Fixed issue where BIOS recovery fails if using a BIOS image altered with Intel Integrator Toolkit. BIOS Version KCH7710H.86A Date: October 29, 2012 ME Firmware: Visual BIOS: 1.2.2

4 Updated Visual BIOS to version Fixed issue with Wake on LAN PXE Boot. Fixed Intel Integrator Toolkit test failure. Fixed issue where PCH temperature value is not correct. Fixed issue where system does not boot to the operating system when UEFI Boot is enabled. Fixed LAN packet drop issue. Updated Lucid* key. Fixed issue where certain keyboards and mice are not detected during boot. Removed platform key generation option in Setup. BIOS Version KCH7710H.86A Date: October 8, 2012 ME Firmware: Visual BIOS: Note: Any memory modules installed are incorrectly displayed as DDR MHz frequency in Visual BIOS. Memory frequencies are correctly displayed in BIOS Classic mode. Updated Visual BIOS to version Updated VBIOS to version Updated RAID Option ROM to version Updated Intel ME 8 firmware to Updated processor support. Fixed issue with LAN packet drop. Fixed issue where PCIe x1 TV tuner card does not work. Fixed issue related to Secure Boot Manual Logo Test failure. Fixed issue where fan speeds for Chassis Inlet and Outlet are swapped in Intel Desktop Utilities. Fixed issue where system does not boot PXE Boot image when Wakeon-LAN from S4/S5 is set to PXE BOOT. Fixed issue where onboard device information is wrong under SMBIOS. BIOS Version KCH7710H.86A Date: September 6, 2012 ME Firmware: Integrated Graphics Option ROM: Build 2124 PC SATA RAID Option ROM: v

5 Note: When using KC0100.BIO with the Intel Integrator Toolkit (ITK) version 5.0.0, these errors may occur: Error: Unsupported Logo. The opened BIOS does not have this support. If you need to use ITK version to customize the BIOS for Intel Desktop Board DH77KC or DH77DF, do not update to BIOS version This problem was fixed in ITK version and later. Fixed issue where boot device is not found if changing hard drive s SATA port. Fixed issue with flash update status indicators. Fixed power button recovery: Video initialized before Recovery starts Fixed issue with Express BIOS Update in Windows XP*. Fixed issue with processor C-States. Fixed issue with booting USB devices first. Fixed issue with F7 update when USB key is created by Microsoft Windows* DVD download tool. Fixed issue with XMP memory voltage. Fixed issue where PCIe x4 network adapters are not recognized. Updated SMBIOS entry location for legacy SMBIOS tools. Uninstall ACPI BGRT table if legacy boot. Added code to handle UEFI PXE boot options. Fixed issue where there is insufficient space to build.bio files. Improved Back-to-BIOS mode. Added code to update Runtime service table CRC32 value to pass WHCK test. Updated BIOS to display security violation message when secure boot fails. Updated BIOS to let UEFI boot options reference BootOrder variable. Updated USB hard drive boot order option tag priority. Removed code to create Windows* boot manager boot options; now boot option will display as UEFI: HDD Name to avoid duplicates. Added SLP1.0 support when SMBIOS Type1/offset4 is updated by Intel Integrator Toolkit. Updated Intel ME 8 firmware to version Fixed issue where system can be waked up from S3 after unchecking Allow this device to wake the computer in Device Manger for PS/2 keyboard or mouse. BIOS Version KCH7710H.86A Date: June 8, 2012 ME Firmware: Integrated Graphics Option ROM: Build 2124 PC SATA RAID Option ROM: v Updated password feature to allow special key characters.

6 Created UEFI Boot Options if hard drive already has UEFI operating system installed. Set certain USB ports to always enabled: o Ports 7 and 13 for DH77DH o Ports 7 and 10 for DH77KC Fixed issue where you cannot continuously type special characters with the Shift key in setup. Fixed issue with Consumer Infrared (CIR) and WHQL. Added default boot priority for Advanced boot order. Fixed issue with error in Device Manager* when UEFI boot is enabled. Updated to prevent setup loading to default values when removing CMOS battery. Updated to allow keyboard input when system is processing legacy option ROM. Fixed issues with fan speed control variables. Fixed issue where operating system installation fails with UEFI. Updated for handling UEFI OS boot option under RAID mode with no input device connected. Changed Intel Graphics Performance Analyzers default to disabled. Updated processor support. Updated Intel ME firmware to version Fixed issue with NTFS device support recovery. Fixed issue where system does not wake from S3 after pressing right key of PS/2 mouse. Fixed issue where system still can wake from S4 via PS/2 mouse. No detect lose function for USB 3.0 ports. Added Setup item Intel Graphics Performance Analyzers. Fixed issue where maximum Non-turbo ratio does not work on the Performance page. Updated to keep SATA Mode settings when SATA mode was set to RAID, after a flash update. Fixes for Intel Integrator Toolkit (ITK): o Ordered list BIOS settings through ITK UI are not reflected in BIOS setup o EBU error message is displayed when booting to windows after customizing system BIOS (after performing the Install BIOS operation) o Customized logo is displayed in the BIOS splash screen even though the Update image when installing BIOS checkbox (Apply field 0 ) was unselected o Performance settings are populated in the Settings pane under Performance node o Unable to modify any SMBIOS field values which were already installed/displayed in BIOS setup page o Fix for GUI will not populate settings pane in first boot after flash ROM image file. o Fix for EBU/ITK customizations will not process on Windows x64 with more than 4GB memory installed. Fixed issue where PS/2 port option is lost from onboard device with system password installed. Fixed issue where Setup menu displays abnormally with Video Optimization enabled. Fixed CIR LED issue. Fixed issue where F7 Update cannot load.bio file with NTFS USB device.

7 Fixed issue where a PCI graphics card attached to slot of PCI-3 is not listed under detected video device priority. Fixed issue where serial port disable function is lost. BIOS Version KCH7710H.86A Date: February 24, 2012 ME Firmware: Integrated Graphics Option ROM: Build 2124 PC SATA RAID Option ROM: v Initial production BIOS release LEGAL INFORMATION Information in this document is provided in connection with Intel Products and for the purpose of supporting Intel developed server/desktop boards and systems. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a trademark of Intel Corporation in the US and other countries. Copyright (c) 2012 Intel Corporation.