Quick Installation Guide for RHV/Ovirt
|
|
- Harold Cummings
- 5 years ago
- Views:
Transcription
1 Quick Installation Guide for RHV/Ovirt 2017 Chengdu Vinchin Technology Co. Ltd. All rights reserved.
2 CONTENTS 1. Create New Virtual Machine Install Backup Server ( as master) Install Backup Node ( as slave ) (Optional)
3 1. Create New Virtual Machine To install the VINCHIN Backup & Recovery on a RedHat RHV/Ovirt host, first you need to connect the RedHat Virtualization management platform with the host. Then create a new virtual machine via the management platform. Before creating new virtual machine, you need to upload VINCHIN Backup & Recovery ISO file to ISO library. Steps are as follows: a) Click System, then click New VM to create a new virtual machine. 2
4 b) In the General page, choose Linux in the Operation System line, choose Desktop in the Optimized for line, type a name for the new VM in the Name line. Then Click OK to the next page. c) Then click Boot Options to enter boot options page, under the Boot Sequence options choose CD-ROM in the First Device line, enable Attach CD and choose VINCHIN Backup & Recovery ISO file from the ISO library. Then click OK to the next page. 3
5 d) Set two storage disks for the VM, one as system disk, the other as backup repository. System disk capacity 100+ GB is recommended, backup repository capacity can be set according to your actual demands. e) Add at least one network interface for the new VM. 4
6 2. Install Backup Server ( as master) After new VM created, power on the VM and start installing the VINCHIN Backup & Recovery iso file. a) Choose Install CentOS 7 and press Enter button on the keyboard. Then a few seconds later, you will be entering the INSTALLATION SUMMARY page. b) Click DATE & TIME to set up time for your Vinchin Backup & Recovery system. 5
7 c) Click the INSTALLATION DESTINATION. 6
8 Choose the 100GB hard disk as system disk and click Done. 7
9 Click NETWORK&HOST NAME, then Click Configure. 8
10 Click IPv4 Settings Choose Manual in the Method selection Click Add to enter your network IP address information, example as below. Then click Save to save your configuration data. Click the red marked button in below to enable the Ethernet connection, you will see the configured network information. Click Done on the left top to return back to home page. 9
11 d) Other options are defaultly configured, directly click Begin installation to start. 10
12 After installation completed, click Reboot to reboot the VM. e) After VM rebooted, you can login to the Web UI of VINCHIN Backup & Recovery to start backup and recovery jobs. Enter the IP address of VINCHIN Backup& Recovery to access the web login page. (Google Chrome browser is recommended.) Default login username: admin Password: Background username: root Password:
13 f) Add Backup Repository After entering the Web UI, find Resources Backup Repository, click and enter the backup repository setting page. Click Add to add local disk as backup repository. 12
14 Note: You can add backup repository only after your backup system has been licensed. 13
15 3. Install Backup Node ( as slave ) (Optional) Generally, installing a Backup Server (as master) is enough for backup. But installing backup nodes ( as slave) are necessary when in a large-scale virtual environment. Installation steps please follow Part 1. Create new VM and Part 2. Install Backup Server (as master). Backup Node ISO file can be downloaded from VINCHIN website or contact VINCHIN sales to provide. E.g. vinchin-node_enterprise-4.0.xxxx.iso Note: The IP address of Backup Node (as slave) shall keep different from the Backup Server (as master), but they should be able to communicate with each other. There is no separate Web UI for Backup Node (as slave), all Backup Nodes are managed by Backup Server (as master). After the backup node installed successfully, you can login the node background to modify config files. Node Background username: root Password: Edit config file: vi /etc/common_server.conf.xml Modify the server_ip and database_ip to Backup Server s IP address. 14
16 Enclose:vi editor often-used command i Insert esc Exit the editor :wq Save & exit Note:You need to reboot the Backup Node system after you modified its config files: reboot After rebooting the Backup Node system, login the Backup Server s Web UI with default username : admin, password : You can view the installed Backup Node information in the Resources Backup Node. 15
17 16 Quick Installation Guide V4.0
18 17 Quick Installation Guide V4.0
Reset the Admin Password with the ExtraHop Rescue CD
Reset the Admin Password with the ExtraHop Rescue CD Published: 2018-01-19 This guide explains how to reset the administration password on physical and virtual ExtraHop appliances with the ExtraHop Rescue
More informationGuideline for the installation of C-MOR Video Surveillance Virtual Machine on VMware ESX Server
This guideline illustrates the installation of the C-MOR Video Surveillance Virtual Machine on VMware ESX Server. This manual applies to C-MOR version 4 with 64 bit operating system. First download the
More informationClearswift Gateway Installation & Getting Started Guide. Version 4.1 Document Revision 1.4
Clearswift Gateway Installation & Getting Started Guide Version 4.1 Document Revision 1.4 Copyright Revision 1.4, March, 2015 Published by Clearswift Ltd. 1995 2015 Clearswift Ltd. All rights reserved.
More informationISO Installation Guide. Version 1.2 December 2015
Version 1.2 December 2015 ISO Installation Guide Copyright 2015 iwebgate. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
More informationPower IQ DCIM Monitoring Evaluation Copy A Step-By-Step Guide
1 Power IQ DCIM Monitoring Evaluation Copy A -By- by Thank you for downloading this free evaluation copy of Sunbird s Power IQ DCIM monitoring software which supports up to five devices! Power IQ allows
More informationDeploying Cisco UCS Central
This chapter includes the following sections: Obtaining the Cisco UCS Central Software from Cisco, page 1 Using the Cisco UCS Central OVA File, page 2 Using the Cisco UCS Central ISO File, page 4 Logging
More informationCreate a pfsense router for your private lab network template
Create a pfsense router for your private lab network template Some labs will require a private network where you can deploy services like DHCP. Here are instructions for setting up an uplink router for
More informationInstalling FreePBX Official Distro
Installing FreePBX 10.13.66 Official Distro Follow these instructions for the easiest, totally automated FreePBX installation! 1. Download the ISO file from http://www.freepbx.org/downloads. 2. Convert
More informationdctrack Quick Setup Guide (Recommended) Obtain a dctrack Support Website Username and Password
dctrack 5.0.0 Quick Setup Guide This guide walks you through installing dctrack for the first time. In other words, this is a clean install - it is not an integration of dctrack and Power IQ, and it is
More informationSOA Software API Gateway Appliance 6.3 Administration Guide
SOA Software API Gateway Appliance 6.3 Administration Guide Trademarks SOA Software and the SOA Software logo are either trademarks or registered trademarks of SOA Software, Inc. Other product names, logos,
More informationCTEC1863/2018F Bonus Lab Page 1 of 5
CTEC1863/2018F Bonus Lab Page 1 of 5 Bonus Lab: OpenSUSE Linux Rescue In this lab, we will install an OpenSUSE virtual machine. However, both the non-root user and the root passwords are unknown. To fix
More informationSECURE Gateway with Microsoft Azure Installation Guide. Version Document Revision 1.0
SECURE Email Gateway with Microsoft Azure Installation Guide Version 4.7.0 Document Revision 1.0 Copyright Revision 1.0, November, 2017 Published by Clearswift Ltd. 1995 2017 Clearswift Ltd. All rights
More informationRedhat OpenStack 5.0 and PLUMgrid OpenStack Networking Suite 2.0 Installation Hands-on lab guide
Redhat OpenStack 5.0 and PLUMgrid OpenStack Networking Suite 2.0 Installation Hands-on lab guide Oded Nahum Principal Systems Engineer PLUMgrid EMEA November 2014 Page 1 Page 2 Table of Contents Table
More informationVMware vsphere 5.5: Install, Configure, Manage Lab Addendum. Lab 3: Configuring VMware ESXi
VMware vsphere 5.5: Install, Configure, Manage Lab Addendum Lab 3: Configuring VMware ESXi Document Version: 2014-07-08 Copyright Network Development Group, Inc. www.netdevgroup.com NETLAB Academy Edition,
More informationAMD Ryzen Threadripper NVMe RAID Quick Start Guide RC Release Version 1.0
AMD Ryzen Threadripper NVMe RAID Quick Start Guide RC-9.1.0 Release Version 1.0 1 P a g e Contents 1 GENERAL INFORMATION... 3 1.1 Purpose... 3 1.2 System requirements... 3 1.3 Information about supported
More informationTable of Contents 1 V3 & V4 Appliance Quick Start V4 Appliance Reference...3
Table of Contents 1 V & V4 Appliance Quick Start...1 1.1 Quick Start...1 1.2 Accessing Appliance Menus...1 1. Updating Appliance...1 1.4 Webmin...1 1.5 Setting Hostname IP Address...2 1.6 Starting and
More informationElasterStack 3.2 User Administration Guide - Advanced Zone
ElasterStack 3.2 User Administration Guide - Advanced Zone With Advance Zone Configuration TCloud Computing Inc. 6/22/2012 Copyright 2012 by TCloud Computing, Inc. All rights reserved. This document is
More informationVirtual Appliance User s Guide
Cast Iron Integration Appliance Virtual Appliance User s Guide Version 4.5 July 2009 Cast Iron Virtual Appliance User s Guide Version 4.5 July 2009 Copyright 2009 Cast Iron Systems. All rights reserved.
More informationScaleArc for MySQL 3.0. VMware Deployment Guide
ScaleArc for MySQL 3.0 VMware Deployment Guide Trademarks ScalArc, Inc. 2014 ScaleArc 2014 ALL RIGHTS RESERVED. THIS DOCUMENT IS PROPRIETARY TO SCALARC, INC., AND MAY NOT BE REVISED, MODIFIED OR OTHERWISE
More informationDocumentation. OTRS Appliance Installation Guide. Build Date:
Documentation OTRS Appliance Installation Guide Build Date: 12/10/2014 OTRS Appliance Installation Guide Copyright 2001-2014 OTRS AG This work is copyrighted by OTRS AG. You may copy it in whole or in
More informationInstalling CMX 10.5 on Cisco MSE 3375
Installing CMX 10.5 on Cisco MSE 3375 Contents Introduction Prerequisites Requirements Components Used Installation CIMC configuration and KVM launch CMX image installation CMX initial setup CMX node installation
More informationClearswift SECURE Gateway Installation & Getting Started Guide. Version 4.3 Document Revision 1.0
Clearswift SECURE Email Gateway Installation & Getting Started Guide Version 4.3 Document Revision 1.0 Copyright Revision 1.1, March, 2016 Published by Clearswift Ltd. 1995 2016 Clearswift Ltd. All rights
More informationSecurity Management System SNMP Trap Interface
Security Management System software generates various alarms on events. SMS SNMP trap Interface application connects to one or more SMS Servers and receives all the alarms generated by the SMS application.
More informationefolder BDR for Quest Rapid Recovery / VMware Continuity Cloud Guide
efolder BDR for Quest Rapid Recovery / VMware Continuity Cloud Guide Accessing Continuity Cloud via VSphere Restore Your VM/Point in time restore Setting up Virtual Standby efolder BDR Guide for Veeam
More informationInstalling the Cisco Virtual Network Management Center
CHAPTER 4 Installing the Cisco Virtual Network Management Center This chapter provides procedures for installing the Cisco Virtual Network Management Center (VNMC). This chapter includes the following
More informationBuilding a 64-bit CentOS 7 Workstation using Oracle Virtual Box
Building a 64-bit CentOS 7 Workstation using Oracle Virtual Box jthomas Enterprises, 2016 Building a CentOS 7 Workstation using Oracle VirtualBox 1 Section 1 Before You Begin This section details the environment
More informationClearswift SECURE Gateway Installation & Getting Started Guide. Version Document Revision 1.0
Clearswift SECURE Email Gateway Installation & Getting Started Guide Version 4.6.0 Document Revision 1.0 Copyright Revision 1.0, April, 2017 Published by Clearswift Ltd. 1995 2017 Clearswift Ltd. All rights
More informationController Installation
The following describes the controller installation process. Installing the Controller, page 1 Controller Deployment, page 2 Controller Virtual Hard Disk Storage, page 4 Custom Controller Web UI Certificates,
More informationGetting Started with the Deployment Console and Deploying the Clients Per PXE Network Booting using their MAC address. Quick Guide
Getting Started with the Deployment Console and Deploying the Clients Per PXE Network Booting using their MAC address Quick Guide Deployment Manager 2 Quick Guide 1 Introduction...3 1.1 Installing the
More informationUsing iscsi with BackupAssist. User Guide
User Guide Contents 1. Introduction... 2 Documentation... 2 Terminology... 2 Advantages of iscsi... 2 Supported environments... 2 2. Overview... 3 About iscsi... 3 iscsi best practices with BackupAssist...
More informationFile Backup and Transfer
File Backup and Transfer This backup and transfer process is designed specifically for fast, efficient migration of applications and data from a COE (Common Operating Environment) source PC to a new destination
More informationInstalling the Operating System or Hypervisor
If you purchased E-Series Server or NCE Option 1 (E-Series Server or NCE without a preinstalled operating system or hypervisor), you must install an operating system or hypervisor. This chapter includes
More informationAKIPS Network Monitor Installation, Configuration & Upgrade Guide Version 17. AKIPS Pty Ltd
AKIPS Network Monitor Installation, Configuration & Upgrade Guide Version 17 AKIPS Pty Ltd December 21, 2017 1 Copyright Copyright 2017 AKIPS Holdings Pty Ltd. All rights reserved worldwide. No part of
More informationFreeBSD Installation
1 FreeBSD Installation AFNOG Chix 2011 Blantyre, Malawi 31 st Oct - 4 th Nov 2011 Dorcas Muthoni and Evelyn Namara 2 READ THE INSTRUCTIONS These slides contain explicit instructions to allow you to successfully
More informationLab #5 Guide: Installing Ubuntu as a Virtual Machine
Lab #5 Guide: Installing Ubuntu as a Virtual Machine CTEC1863/2018F Operating Systems Mike Boldin Tools, Materials and Equipment Oracle VirtualBox software official site: https://www.virtualbox.org/wiki/downloads
More informationSymantec NetBackup Appliances Hands-On Lab
Symantec NetBackup Appliances Hands-On Lab Description NetBackup Appliances Hands On Lab This lab assumes a prerequisite knowledge of NetBackup, specifically configuring storage units, creating backup
More informationInstalling Nagios Log Server with VMware Workstation Player
LS Installing Nagios Log Server with VMware Workstation Player This document is intended to outline the steps required to install Nagios Log Server within VMware Workstation Player. Still need installation
More informationUOB Offline Data Input Software (ODIS)
UOB Offline Data Input Software (ODIS) Version 2 Installation User Guide April 2015 TABLE OF CONTENT Page 1 OBJECTIVES AND REQUIREMENTS... 3 1.1 Objectives... 3 1.2 Requirements... 3 2 GETTING STARTED...
More informationInstalling Cisco StadiumVision Director Software from a DVD
Installing Cisco StadiumVision Director Software from a DVD First Published: May 29, 2012 Revised: August 2, 2012 This module describes how to install the Cisco StadiumVision Director Release 3.0 software
More information4. Web-based Switch Configuration
4. Web-based Switch Configuration Management Options Connecting using the Web User Interface Logging onto the Web Manager Smart Wizard Web User Interface (Web UI) Management Options The Switch provides
More informationNova series update F/W & Boot code from Boot Utility
Nova series update F/W & Boot code from Boot Utility Purpose: Update firmware/boot code from Boot Utility Product Affect: Nova 20S, Nova 20R, Nova 26S, Nova 26R, Nova 27S, Nova 29S, Nova 30S, Nova 30R,
More informationInstallation of OEL5.4 in windows machine (64 bit)
Requirements: Installation of OEL5.4 in windows machine (64 bit) 1. Virtual Box software (VirtualBox-4.2.18-88781-Win) Go to the link and click on the below setup file for download. Platform Windows (32-bit/64-bit)
More informationInstalling Cisco MSE in a VMware Virtual Machine
Installing Cisco MSE in a VMware Virtual Machine This chapter describes how to install and deploy a Cisco Mobility Services Engine (MSE) virtual appliance. Cisco MSE is a prebuilt software solution that
More informationUpgrading Software and Firmware
APPENDIXB This appendix describes how to upgrade or reinstall the Cisco PAM server software, desktop client software, and Gateway module firmware. Contents Upgrade Notes for Release 1.1.0, page B-2 Upgrading
More informationAccessing the Console and Re-Installing your VPS Manually
Accessing the Console and Re-Installing your VPS Manually This guide will walk you through the necessary steps to access your VPS console and re-install your VPS OS manually. Step 1 Access your VPS information
More informationInstallation. Power on and initial setup. Before You Begin. Procedure
Power on and initial setup, page 1 Customize ESXi host for remote access, page 4 Access and configure ESXi host, page 6 Deploy virtual machines, page 13 Install applications on virtual machines, page 14
More informationEXPRESSCLUSTER X for Windows. Quick Start Guide for Windows Server 2016 Hyper-V. Version 1 Mar 27, 2018
EXPRESSCLUSTER X for Windows Version 1 Mar 27, 2018 Disclaimer The contents of this document are subject to change without notice. NEC Corporation assumes no responsibility for technical or editorial mistakes
More informationIT Essentials v6.0 Windows 10 Software Labs
IT Essentials v6.0 Windows 10 Software Labs 5.2.1.7 Install Windows 10... 1 5.2.1.10 Check for Updates in Windows 10... 10 5.2.4.7 Create a Partition in Windows 10... 16 6.1.1.5 Task Manager in Windows
More informationSaaSaMe Transport Workload Snapshot Export for. Alibaba Cloud
SaaSaMe Transport Workload Snapshot Export for Alibaba Cloud Contents About This Document... 3 Revision History... 3 Workload Snapshot Export for Alibaba Cloud... 4 Workload Snapshot Export Feature...
More informationCHAPTER III PLANNING
CHAPTER III PLANNING Table 1: Project Management Activities August September October Analysis Install VirtualBox Installation and update Ubuntu 14.04, Fedora 22 dan opensuse 13.1 Configuration VirtualBox
More informationManagement Console User s Guide (AST 2500 Chipset)
Management Console User s Guide (AST 2500 Chipset) Version: 1.2 Table of Contents Using Your Management Console... 2 Management Console Key Features and Functions... 3 Software Install... 4 Prerequisites
More informationPlexxi Control Installation, Upgrade and Administration Guide Releases 2.3.x, 2.4.x, 3.0.x, 3.1.0
Plexxi Control Installation, Upgrade and Administration Guide Releases 2.3.x, 2.4.x, 3.0.x, 3.1.0 702-20002-10 Rev 2.2 May 16, 2017 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX
More informationThe Ip address / Name value should be: srvvcenter-cis
CIS133 Installation Lab #1 - DESKTOP CLIENT OpenSUSE Install. Before beginning the installation, create a virtual machine in which you will install the operating system. 1) Open the VMware vsphere Client.
More informationDUAL OS INSTALLATION
Ex.No:15 Date: DUAL OS INSTALLATION Aim: To install and configure Ubuntu OS alongside Windows as installing dual OS. PROCEDURE: 1. Backup your Windows partition To open the Dell Backup and Recovery software
More informationInstallation of Lubuntu Linux, Koha, DSpace and other software using LibLiveCD
Installation of Lubuntu Linux, Koha, DSpace and other software using LibLiveCD NOTE: Before performing the below tasks, please ensure you have one basic disk partition (with no data) or some free space
More informationXBox Setup There are two ways of allowing your XBox to communicate with the internet. One is through port forwarding and the other is through the DMZ feature. Port forwarding will enable specified ports
More informationIntegrating RDX QuikStor into Windows Backup with Full System Recovery for Windows Desktop OS
Integrating RDX QuikStor into Windows Backup with Full System Recovery for Windows Desktop OS INTEGRATION BRIEF The built-in Windows Backup included with current Windows operating systems does not support
More informationLab Install Windows 8
Introduction In this lab, you will install Windows 8.1 and 8.0. Recommended Equipment A computer with a blank hard disk drive Windows 8.1 and 8.0 installation DVD or USB flash drive Step 1: Starting the
More informationServer Installation Manual Applies to software release v5.3
Server Installation Manual Applies to software release v5.3 Form 8147B February 2017 Server Installation Manual Revision 02da336 (2017-02-23) Copyright c 2017 Sencore, Inc. All rights reserved. 3200 Sencore
More informationFreeBSD Installation ISOC/AfNOG
FreeBSD Installation ISOC/AfNOG Michuki Mwangi (Original materials by Hervey Allen NSRC) 1 READ THE INSTRUCTIONS These slides contain explicit instruc2ons to allow you to successfully install FreeBSD and
More informationClearswift SECURE Gateway Installation & Getting Started Guide. Version Document Revision 1.0
Clearswift SECURE Email Gateway Installation & Getting Started Guide Version 4.7.0 Document Revision 1.0 Copyright Revision 1.0, November, 2017 Published by Clearswift Ltd. 1995 2017 Clearswift Ltd. All
More informationWCM 6.0 Pro MS/SP Software Recovery Installation Guide
Release Date: 2013/09/23 WCM 6.0 Pro MS/SP Software Recovery Installation Guide Once the OS is restored or re-imaged successfully on the system, please follow below installation guide to complete all the
More informationSUSE Cloud Admin Appliance Walk Through. You may download the SUSE Cloud Admin Appliance the following ways.
SUSE Cloud Admin Appliance Walk Through First before you proceed with deploying the Admin Appliance you must go through and answer the questionnaire to ensure you have an idea of the scope of the project
More informationAMD RAID Installation Guide
AMD RAID Installation Guide 1. AMD BIOS RAID Installation Guide... 2 1.1 Introduction to RAID... 2 1.2 RAID Configurations Precautions... 4 1.3 Legacy RAID ROM Configuration (for AMD X370, B350, and A320
More informationNETW 110 Lab 5 Creating and Assigning Users and Groups Page 1
NETW 110 Lab 5 Creating and Assigning Users and Groups Page 1 Objective At the conclusion of this lab, the student will be able to add and delete users, create and assign users to groups, and assign users
More informationHow to achieve WIFI Client (Datalink) to receive RTK corrections from your Android or Windows device
How to achieve WIFI Client (Datalink) to receive RTK corrections from your Android or Windows device Note: Your device should be connected to cellular network WIFI client means the WIFI function will work
More information(B) Execute SMS TCP MODBUS Interface Application
Security Management System software generates notifications which indicate the state of various health parameters eg disk failure, one or more cameras offline etc. These notifications can be exposed as
More informationLab - Install Windows 7 or Vista
Introduction In this lab, you will install the Windows 7 or Vista operating system. Recommended Equipment A computer with a blank hard disk drive Windows 7 or Vista installation DVD or USB flash drive
More informationUpdating Firmware on the Trimble R2
May 2017 1 Updating Firmware on the Trimble R2 May 2017 2 Table of Contents Section 1: Downloading the Latest R2 Firmware Page 3 Section 2: Connecting the R2 to a Wifi Enabled Personal Computer (PC) Page
More informationArabic Ubuntu Support
Arabic Ubuntu Support How to install ubuntu 8.04 Ubuntu installtion it s very easy This topic is from howtoforge site All photos are from how to forge site 1 Install Media The install media is available
More informationASTi SYNAPSE Cold Start and Installation Manual Document: DOC-01-SYN4-CSI-1
ASTi SYNAPSE Cold Start and Installation Manual Document: DOC-01-SYN4-CSI-1 Advanced Simulation Technology inc. 500A Huntmar Park Drive, Herndon, Virginia, 20170 USA Revision F (Feb., 2012) Product Name:
More informationSANOG VI IP Services Workshop: FreeBSD Install
SANOG VI IP Services Workshop: FreeBSD Install FreeBSD is designed to be a server operating system. This becomes apparent during the installation process. The FreeBSD installer is a console-based (not
More informationSystem Manager Unit (SMU) Hardware Reference
System Manager Unit (SMU) Hardware Reference MK-92HNAS065-02 Notices and Disclaimer Copyright 2015 Hitachi Data Systems Corporation. All rights reserved. The performance data contained herein was obtained
More informationClearswift SECURE Gateway Installation & Getting Started Guide. Version Document Revision 1.0
Clearswift SECURE Email Gateway Installation & Getting Started Guide Version 4.8.0 Document Revision 1.0 Copyright Revision 1.0, July, 2018 Published by Clearswift Ltd. 1995 2018 Clearswift Ltd. All rights
More informationCIS 231 Windows 10 Install Lab # 3
CIS 231 Windows 10 Install Lab # 3 1) To avoid certain problems later in the lab, use Chrome as your browser: open this url: https://vweb.bristolcc.edu 2) Here again, to avoid certain problems later in
More informationPlexxi Control Installation, Upgrade and Administration Guide Releases 2.3.x, 2.4.x, 3.0.x, 3.1.0
Plexxi Control Installation, Upgrade and Administration Guide Releases 2.3.x, 2.4.x, 3.0.x, 3.1.0 702-20002-10 Rev 2.0 March 31, 2017 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX
More informationPerform Backup and Restore
, page 1 You can schedule periodic backups using the Cisco Prime Collaboration user interface, or run backup commands manually by logging in to the system as an admin user (CLI user). However, you must
More informationJ60 Thin Client. User Guide
J60 Thin Client User Guide Version 1.7 ShenZhen JIEYUN Technology Co., Ltd. (www.jieyung.com) Updated at 2014-06-28 Copyright @ 2013 JIEYUN Technology Co., Ltd. All rights reserved. Please do not copy,
More informationXenServer Demo/Evaluation System
1 XenServer Demo/Evaluation System Technical Setup Guide December 2009 2 Overview This document describes the implementation of a simple demonstration and evaluation environment for Citrix XenServer. The
More informationTitle: Demonstrate the linux installation and administration settings.
OOPL Assignment 1 Title: Demonstrate the linux installation and administration settings. Objectives: 1) To install Ubuntu Linux on Windows without erasing current operating system. 2) To give the students
More informationVMWare Workstation Installation. Microsoft Windows Server 2008 Enterprise with Service Pack 2
VMWare Workstation Installation Microsoft Windows Server 2008 Enterprise with Service Pack 2 Starting Vmware Workstation Go to start menu and start VMware Workstation program. *Note: The following instructions
More informationUbuntu installation alongside windows 8/8.1 and 10
Ubuntu installation alongside windows 8/8.1 and 10 Important safety precautions in windows - Before starting the installation process NOTE:1. If you are already using Windows OS in your computer, take
More informationClearswift SECURE ICAP Gateway Installation & Getting Started Guide. Version Document Revision 1.0
Clearswift SECURE ICAP Gateway Installation & Getting Started Guide Version 4.7.2 Document Revision 1.0 Copyright Revision 1.0, April, 2018 Published by Clearswift Ltd. 1995 2018 Clearswift Ltd. All rights
More informationVirtualized XOS Image Installation - Windows
Virtualized XOS Image Installation - Windows XOSv Installation Procedure This document provides a step-by-step process to install the XOSv image on to a new networking platform. If you have questions,
More informationDJI FlightHub Enterprise
DJI FlightHub Enterprise Installation Guide v1.0 2019.03 Before installing FLIGHTHUB, please carefully read the installation instructions; Only simple notifications of Linux commands are mentioned here
More informationVirtual Data Center (vdc) Manual
Virtual Data Center (vdc) Manual English Version 1.0 Page 1 of 43 Content 1 HOW TO USE CLOUD PORTAL (VMWARE VIRTUAL DATA CENTER)... 3 2 VMWARE SYSTEM DETAILS... 5 3 HOW TO MANAGE VIRTUAL MACHINE... 6 Edit
More information14. Firmware update procedure
14. Firmware update procedure Periodical FW updates will be provided. Please follow and apply the following instructions that illustrate a FW update starting from the UI log-in step. 14.1 Step 1 Log in
More informationHow to Install ESXi 4.0 on Workstation as a VM
white paper How to Install ESXi 4.0 on Workstation 6.5.2 as a VM Title: How to Install ESXi 4.0 on Workstation 6.5.2 as a VM Author(s): Xtravirt (Paul Buckle) Target Audience: Technical - Novice Current
More informationHPE Knowledge Article
HPE Knowledge Article HPE Integrated Lights Out (ilo 5) for Gen10 Servers - What is System Recovery Set? Article Number mmr_sf-en_us000021097 Environment HPE Integrated Lights Out (ilo 5) HPE ProLiant
More informationLogging In and Setting Up
This chapter includes the following sections: Overview of, page 1 Resetting the Admin Password, page 3 Password Guidelines, page 3 Resetting the Shared Secret, page 4 Overview of You can log in and work
More information802.11g Super-G 108Mb Wireless Access Point Quick Installation Guide
802.11g Super-G 108Mb Wireless Access Point Quick Installation Guide The enclosed Hardware Installation Guide gives you a step-by-step explanation of how to install your 108Mb Super-G PCI Adapter. Further
More informationRECOMMENDED PROCEDURE
RECOMMENDED PROCEDURE Maintaining values entered in Information Store and downloading Financial Statements Template and VERSION 2.00 PROCEDURE SUMMARY 1. Open CaseWare Working Papers to go to Templates...
More informationBuild your own NAS with OpenMediaVault
Build your own NAS with OpenMediaVault Installation Minimum Requirements i486 or amd64 platform 1 GiB RAM 2 GiB HDD/DOM/CF/USB Thumb Drive used as OpenMediaVault system drive. Flash Drives without static
More informationLIVENX UPGRADE GUIDE (AIO)
LIVEACTION, INC. LIVENX UPGRADE GUIDE 7.0.1 (AIO) UPGRADE LiveAction, Inc. 3500 Copyright WEST BAYSHORE 2017 LiveAction, ROAD Inc. All rights reserved. LiveAction, LiveNX, LiveUX, the LiveAction Logo and
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS The DPA program must be updated annually for tax, law, and system changes. We recommend that you always back up and/or copy the program s folder to another location prior to installation.
More informationVideoEdge NVR 4.1 to 4.21 Migration
Application 8200-0959-26 A0 Date Issued: 19 November, 2012 VideoEdge NVR 4.1 to 4.21 Migration Product Model Software Part Number(s) VideoEdge NVR 4.1, 4.21 Various Purpose This application note provides
More informationRoadRunner 24AP(i+) Recovering Tool Instructions
RoadRunner 24AP(i+) Recovering Tool Instructions Ver. 1.0 Follow these instructions if your modem do not boot. If you have questions or problems using this modem build in recovering tool, please contact
More informationSystem Configuration. Browser Requirements on a second system. HP Z1 G2 Workstation with Intel vpro Technology Setup & Use Guide
The following guide explains how to setup and use the HP Z1 G2 Intel vpro Technology workstation SyAM Software, System Client and System Area Manager for performing the AMT out of band management functions.
More informationCisco VDS Service Broker Software Installation Guide for UCS Platforms
Cisco VDS Service Broker 1.0.1 Software Installation Guide for UCS Platforms Revised: May 2013 This document provides detailed instructions for installing the Cisco Videoscape Distribution Suite Service
More informationUsing a Virtual Machine for Cisco IPICS on a Cisco UCS C-Series Server
CHAPTER7 Using a Virtual Machine for Cisco IPICS on a Cisco UCS C-Series Server This chapter describes how to configure a virtual machine (VM) on a Cisco UCS C-Series server. You can install and operate
More information