Lab 11 Deploying and Configuring the DHCP Service

Transcription

1 Lab 11 Deploying and Configuring the DHCP Service THIS LAB CONTAINS THE FOLLOWING EXERCISES AND ACTIVITIES: Lab Challenge Installing the DHCP Server Role Creating a DHCPv4 Scope Creating a DHCPv6 Scope Activating DHCP Confirming DHCP 11.1 Installing the DHCP Server Role In this exercise, you use the Add Roles and Features Wizard to install the DHCP Server role on your network domain controller. Is your domain controller capable of taking on the additional role of DHCP server? Check your available server resources and consider the number of DHCP clients on your network. 10 minutes 11.2 Creating a DHCPv4 Scope A scope is a range of IP addresses that a DHCP server uses to supply clients on a particular subnet with IP addresses. In this exercise, you create a scope for IPv4 addresses on your DHCP server. What IPv4 addressing policies does your organization have in place? 15 minutes 1 Notice that the wizard automatically adds a value to the Subnet mask text box. Where did this value come from? is the default subnet mask for the 10 network address. We are giving a mask of for 254 available host addresses.

2 2 Why is it necessary to exclude addresses from the range of addresses included in the scope? These addresses can be used for servers or printers. These will not be handed out by the dhcp server. 3 How would it be possible to leave the address as part of the scope and still use it for the DHCP server? You would not want to but you can set the server as and add the address back into the pool. 22. Take a screen shot of the DHCP console, showing the contents of the Address Pool folder, by pressing Alt+Prt Scr, and then paste the resulting image into the Lab 11 worksheet file in the page provided by pressing Ctrl+V.

3 11.3 Creating a DHCPv6 Scope In this exercise, you create a DHCP scope to allocate IPv6 addresses to the computers on your network. What IPv6 addressing policies does your organization have in place? 15 minutes 4 Where did the fd00::0:0:0:1 address that you supplied for the DNS Recursive Name Server IPv6 Address List option come from? It is the ipv6 address that was assigned when I started this lab. The server did not have a ipv6 address assigned to it. This allows the server to have a ipv6 address and allows dns to run on ipv Take a screen shot of the Scope Options dialog box, showing the option you just configured, by pressing Alt+Prt Scr, and then paste the resulting image into the Lab 11 worksheet file in the page provided by pressing Ctrl+V.

4 11.4 Activating DHCP In this exercise, you activate the DHCP clients on your network. How do you activate the DHCP clients on a server running Windows Server 2012 R2? 10 minutes Lab Challenge Confirming DHCP To complete this challenge, you must demonstrate that the SERVERB and SERVERC computers have both obtained IPv4 and IPv6 addresses from the DHCP server running on SERVERA. 10 minutes Take screen shots of the SERVERB and SERVERC computers, showing the addresses they have obtained through DHCP, by pressing Alt+Prt Scr, and then paste the resulting images into the Lab 11 worksheet file in the page provided by pressing Ctrl+V.

5

6