XenData SXL- 4200N Archive System: Getting Started & Library Operation Basics. Document last updated: November 30, 2017.
|
|
- Jasmine Gibbs
- 5 years ago
- Views:
Transcription
1 XenData SXL- 4200N Archive System: Getting Started & Library Operation Basics Document last updated: November 30, 2017 Getting Started The SXL-4200N Archive System consists of a XenData SX-250 Archive Server, a 45 slot LTO library with one or two IBM LTO-8 drives and accessories. The SX-250 has been preconfigured for use with the library. Please first refer to this document for system installation and operation instructions.
2 Contents 1. SXL-4200N Options and Pre-Configuration 2. Setup and Connection Instructions 3. System Power-On and Power-Off Procedure 4. Importing and Exporting LTO Cartridges 5. LTO Drive Cleaning 6. Contacting XenData Support Appendix 1: Rack Installation Instructions for the Library Appendix 2: Library Operation Basics 2 XenData SXL-4200 Getting Started
3 1. SXL-4200N Options and Pre-Configuration The SXL-4200 archive system consists of a XenData SX-250 Archive Server, a 45 slot LTO library with one or two internal IBM LTO-8 SAS drives and accessories. In the SXL-4200N base configurations, the SX-250 and LTO-8 library have the following specifications. SX-250 Base Configuration Archive management software: Notification software: Operating system: XenData6 Server XenData Alert Module Microsoft Windows Server 2012 R2 Essentials Processor: RAM: System disk: Cache disk: Network connections: Spare PCIe slots: 1 USB connections (rear mounted): 2 x USB 3.0 Intel Xeon 6-core processor 32 GB 240 GB SSD 6 TB SAS 7,200 rpm 2 x RJ45 connectors; 1000BASE-T, 100-BASE-TX, 10BASE-T USB connection (front mounted): 1 x USB 2.0 SAS connections to library 2 x SFF-8088 connectors; 6 Gb/s SAS Number of power supplies: 1 Power: V; Hz; Amp max Operation temperature: F (10-35 C) Operation humidity: 8-90% non-condensing Form factor: Dimensions (HxWxD): Weight: Rack rails: 1U, 23.9 deep 1.7 x 17.1 x 23.9 (42.9mm x x 607.6mm) 25.4 lbs (11.5 Kg) Included 3 XenData SXL-4200 Getting Started
4 Base Library Configuration Library type: Tape drive type: Overland Storage NEOSeries; manufactured by BDT Media Automation GmbH IBM LTO-8 half-height Drive interface: SFF-8088 connections; 6 Gb/s SAS - 2m cables for connection to SX-250 are included Maximum transfer rate writing and reading: 300 Mbytes/s native per drive Number of tape drives: 1 or 2 Number of cartridge slots: 45 Number of mail slots: 3 Barcode reader: Configuration interfaces: Interface to Medium Changer: Mean Swaps Between Failures: Included Front panel and web interface ADI > 2 million robot load/unload cycles Electrical Number of power supplies: Voltage: Power - library with 2 drives 1 redundant power supply is available as an option VAC; 50-60Hz 300W Dimensions & Weight Rack form factor: Weight: Dimensions (HxWxD): Rack rails: 4U, inches (740 mm) deep 47 lbs (21.3 Kg) 6.9 x 17.6 x (175mm x 447mm x 740mm) Included 4 XenData SXL-4200 Getting Started
5 All SXL-4200N systems are pre-configured as follows. The Windows Server 2012 R2 operating system and XenData software are licensed and activated on the SX-250. The device drivers for the LTO-8 library are loaded on the SX-250. The LTO library web interface (RMI) has the following Administrator ID and password: Admin and XDpassword1. The web interface is accessed via the Ethernet port on the rear of the library which has an IP address of Network port 2 on the SX-250 is pre-configured for connection to the LTO library web interface with a static IP address (IPv4) of Windows Explorer configuration on the SX-250 has a Favorites link which launches the library web interface. The following upgrade options are available for the SXL-4200N: XenData SKU Description Connectivity Options Dual port 10 GbE network adapter HP 560SFP+ pre-installed in SX-250. This adds two 10 GbE ports to the SX-250 and uses the spare PCIe slot. Transceivers not included. SFP+ 10 Gb/s LC Short Range Transceiver for insertion in SKU HP part number J9150A. Quantity 2 required to use both 10 GbE ports in the adapter. Dual port 10 GbE network adapter for use with standard CAT6 or UTP cabling pre-installed in SX It is an HP model 561T adapter and uses the spare PCIe slot. Fibre Channel adapter pre-installed in SX-250 for FC SAN connectivity. Provides two 8 Gb/s FC ports with LC type connectors. Uses the spare PCIe slot. Redundancy Options Additional power supply for SX-250, providing dual AC power input Additional power supply for robotic library, providing dual AC power input Disk Redundancy Upgrade. Includes an additional 6 TB cache disk and system SSD which are pre-installed and configured as mirror disks Performance Options SX-250 Disk Cache Upgrade. Includes an additional 6TB cache disk pre-installed and configured in RAID 0 (striped), taking the cache capacity to 12 TB. SX-250 Disk Cache Upgrade. Includes two additional 6TB cache disks pre-installed and configured in RAID 0 (striped), taking the cache capacity to 18 TB. SX-250 Disk Cache Upgrade, replacing 6 TB cache disk with RAID consisting of 3x 800GB High Endurance SSD in RAID 0 (striped), providing a 2.4TB usable disk cache. 32 GB of additional RAM pre-installed in the SX-250, taking the total RAM capacity to 64 GB. Upgrading the RAM is useful when additional applications are running on the SX-250. Operating System Upgrade Upgrade of operating system for SX-250 or DX-240 from Windows Server 2012 R2 Essentials to Windows Server 2012 R2 Standard Edition. This is required if the server is to be installed as a member of an existing Windows Domain. If purchased, the upgrade options will be pre-installed in the system. 5 XenData SXL-4200 Getting Started
6 2. Setup and Connection Instructions 2.1 Check Packing List Remove all components and verify against packing list. 2.1 Prepare the LTO Library Using two people, remove the library from its box and set it on a secure surface. IMPORTANT Remove and store the shipping lock. The shipping lock is held in place with a label and is located in the top center of the library. It should be removed and stored as described below. 1. Remove the blue securing label. 2. Lift and remove the shipping lock. 3. Store the shipping lock and blue label at the top right of the rear panel of the library. 2.2 Install the SX-250 and LTO Library in a Rack Install the 1RU SX-250 in a 19 inch rack using the rails provided. Please follow the Quick Deploy Rail System Installation Instructions that are included in the box containing the rails. Install the 4RU library without any LTO drives in a 19 inch rack using the rails provided. Please follow the instructions in the Appendix to this Getting Started Guide. Install the LTO tape drive(s) into a drive bay accessible from the rear of the library. Each LTO drive should be flush with the back panel of the library. Finger-tighten the captive thumbscrews until the LTO drive is secure. 6 XenData SXL-4200 Getting Started
7 2.3 Make Archive System Internal Connections Connect Port A on each of the LTO library drives to the SX-250 using the supplied SAS cable(s). The SAS cable may be connected to either of the 6 Gb/s SAS ports on the SX-250, as identified below: Using the supplied green Ethernet cable, connect the 1 GbE Ethernet port 2 on the rear of the SX- 250 to the RMI Ethernet port on the rear of the LTO library as shown below: 2.4 Make External Connections Make all I/O connections to the SXL First make external network connections and connect a keyboard, mouse and monitor or KVM to the server. Then connect power cables to the SX-250 and LTO-7 library. 2.5 Power-on the System Follow the power-on procedure as described in section Configure Windows Server Essentials Configure Windows Server Essentials using the Microsoft wizard that will launch automatically. 2.7 Label Writable LTO Cartridges Carefully attach barcode labels to the LTO cartridges. (Do not use the CLN barcode labels, as these should only be used with cleaning cartridges.) 2.8 Import LTO Cartridges Import at least one LTO data cartridge into the library as described in Section XenData SXL-4200 Getting Started
8 2.9 Configure the SX-250 Archive Policies The administrator defines policies that determine where files are physically stored on the digital archive. These policies support hierarchical storage management (HSM) and automatic LTO cartridge replication. The SX-250 supports three main levels of storage hierarchy: Online with one instance of a file on the 6TB disk cache and, in addition, there will typically be one or more instances on LTO tape. In this case the file will be retrieved from disk cache when accessed over the network. Near-line with at least one instance of a file on an LTO cartridge within the library and no instance on the disk cache. When a near-line file is accessed over the network, the XenData software automatically transfers the file from LTO to disk cache. As soon as the file transfer to disk cache commences, the file transfer over the network also starts. Off-line with no instance on the disk cache and one or more instances of a file on LTO cartridges, all of which have been exported from the tape library. Please refer to the XenData6 Server Administrator Guide provided on the SX-250 memory stick for detailed instruction on how to configure these policies. The XenData6 Server Administrator Guide is also available from the XenData web site ( Configuring the XenData Alert Module Please refer to the Alert Module Administrator Guide for detailed instruction on how to configure these policies. The Alert Module Administrator Guide is supplied on the SX-250 memory stick with the system and is also available from the XenData web site ( Note: if you would like assistance to configure the SX-250, please contact XenData support. Contact details are provided in section Create Folders and Shares on the X: Drive The logical drive under control of XenData6 Server software is the X: drive. Create folders and shares as required. 8 XenData SXL-4200 Getting Started
9 3. System Power-On and Power-Off Procedures 3.1 Power-On Power-on the tape library Power-on the library by depressing the power button on the front of the unit. The library will start to initialize and the green ready light on the front of the library will start to flash Wait until the Library is Ready Wait until the tape library has completed its inventory process and the ready light shows as steady green Power on the SX Logon Power on the SX-250 archive appliance by pressing the power button on the right side of the front panel and wait for it to boot up. Logon to the SX-250 using the following: Windows User Name: Administrator Windows Password: XDpassword1 3.2 Power-Off Preparation Ensure that all archive and restore operations have completed. Ensure that there are no LTO cartridges in any of the tape drives in the tape library as indicated by the control panel on the library. If necessary wait until the drives unload automatically. (The XenData software, by default, will unload tape cartridges after 10 minutes of inactivity.) Power-Off SX-250 Power-off the SX-250 archive server using Shut down from the Windows start button. Wait until the SX-250 completes its power-off sequence Power-Off LTO Library Power-off the LTO library by pressing the power switch on the front of the library. 9 XenData SXL-4200 Getting Started
10 4. Importing and Exporting LTO Cartridges 4.1 Importing LTO Cartridges into the Library Ensure that the barcode labels are correctly attached to the LTO cartridges. Use the library front panel to open the mail slot and manually insert up to 3 cartridges at a time. Manually close the mail slot to import the cartridges. The imported cartridges(s) will be automatically recognized by the XenData software. 4.2 Exporting LTO Cartridges from the Library Use the XenData Management Console and select the cartridge to be exported in the left pane of the console. Right click on the cartridge and select Export. IMPORTANT Do not use the library controls to export LTO cartridges. The mail slot will open automatically. Extend the mail slot and manually remove the cartridge. Repeat the above if multiple cartridges are to be exported. 5. LTO Drive Cleaning LTO drives require cleaning from time to time and this operation is performed automatically by the SXL when required by an LTO drive. This operation is managed by the XenData software. Ensure that at least one cleaning cartridge is present in the tape library. Carefully attach a CLN barcode label to a cleaning cartridge before importing into the library. Cleaning cartridges should be imported into the library like any data cartridge, as described in section XenData SXL-4200 Getting Started
11 6. Contacting XenData Support XenData Americas Support Group Phone Hours: 8:00 AM to 5:00 PM Pacific XenData European Support Group Phone (also from the USA via toll free number ) support@xendata.com Hours: 9:00 AM to 6:00 PM UK time 11 XenData SXL-4200 Getting Started
12 Appendix 1: Rack Installation Instructions for the Library Step 1: Install the Rack Rails 1. Determine the location in your rack for your library to be installed and, using a pencil, mark the location on each vertical rail in your rack. 2. Ensuring that the flange on each rail points toward each other to form a shelf, secure one rail to each side of the rack in your chosen rack location: a. Extend the rails to fit your particular rack depth. The extension sections should be at the rear. b. With the included large black screws, secure the front and back of each rail to the rack, using the second and fourth holes from the bottom. The rails must be fastened with the bottom of each rail parallel to floor and at the same level. Step 2: Insert the Library into the rack 1. Position the library in front of the rack, aligned with the rails. 2. Slide the library onto the rails until the mounting brackets are up against the vertical rack rails. The "donuts" on the side of the library should be under the side bump-out slots at the rear of the rails. 3. Secure it to the rack with the two included captive screws. 12 XenData SXL-4200 Getting Started
13 Appendix 2: Library Operation Basics A2.1 Front Panel 1 Air vents 2 Power Button Pressing the button will initiate a controlled power down of the library (soft power down) 3 Ready LED (green) Illuminates during power on; blinks during tape or library media changer activity. 4 Clean LED (amber) Illuminates when the tape drive has determined that a cleaning tape should be used. Cleaning is only necessary when the library directs to do so. Additional cleaning is not necessary. 5 Attention LED (amber) Illuminates when the library has detected a condition that requires attention by the operator. 6 Error LED (amber) Illuminates when an unrecoverable tape drive or library error occurs. A corresponding error message is shown on the LCD screen. 7 UP button Used to navigate backward through menu items. 8 CANCEL button Used to cancel a user action and return to the last menu item. 10 Right Magazines 11 ENTER button Used to enter to a sub menu or execute an action. 12 DOWN button Used to navigate forward through menu items. 13 Display OCP display 14 Left lower magazine and mail slot 15 Left upper magazine 13 XenData SXL-4200 Getting Started
14 A2.2 Back Panel Library controller: 14 XenData SXL-4200 Getting Started
15 A2.3 Library User Interfaces The library provides two main interfaces: Operator control panel (OCP) The OCP in on the front panel of the library. It has a power button, four LEDs, four control keys, and an LCD screen. With the OCP, you can monitor, configure, and operate most library functions from the library front panel. Normal operation in a XenData archive can be performed with the OCP without need to use the RMI. Remote management interface (RMI) is a web interface With the RMI, you can monitor, configure, and control the library from a web browser. The RMI hosts a dedicated, protected Internet site that displays a graphical representation of the library. The OCP and RMI are similar in design and functionality. OCP Main Menu 15 XenData SXL-4200 Getting Started
16 OCP Information Menu 16 XenData SXL-4200 Getting Started
17 OCP Commands Menu 17 XenData SXL-4200 Getting Started
18 OCP Configuration Menu 18 XenData SXL-4200 Getting Started
SXL-8: LTO-8 Archive System. managed by XenData6 Server software. Eight cartridge library simplifies management of your offline files.
SXL-8: LTO-8 Archive System LTO-8 Archive System managed by XenData6 Server software Eight cartridge library simplifies management of your offline files Functionality Unlimited Offline LTO capacity 84
More informationSXL-4205Q LTO-8 Digital Archive
SXL-4205Q LTO-8 Digital Archive 540 TB LTO Archive System with 1 or 2 LTO-8 Drives Functionality 540 TB library capacity 1 or 2 IBM LTO-8 Drives Manages Unlimited Offline LTO Overview The SXL-4205Q system
More informationPresents. Functionality. Overview. Great Compatibility. LTO-7 Archive System. managed by XenData6 Server software
Presents LTO-7 Archive System managed by XenData6 Server software Eight cartridge autoloader simplifies management of your offline media Functionality Unlimited Offline LTO capacity 42TB Near-line LTO
More informationDX-Series: Disk Archive to 320 TB with Continuous Backup to LTO, Optical Disc or the Cloud
DX-Series: Disk Archive to 320 TB with Continuous Backup to LTO, Optical Disc or the Cloud The DX-Series disk archive have high performance high capacity RAID with Continuous Data Protection to an LTO
More informationXenData Product Brief: SX-250 Server for Optical Disc Archive Libraries
XenData Product Brief: SX-250 Server for Optical Disc Archive Libraries An SX-250 Archive Server manages a Sony Optical Disc Archive library creating a digital video archive that is optimized for broadcasters,
More informationSXL-8500 Series: LTO Digital Video Archives
SXL-8500 Series: LTO Digital Video Archives Scalable LTO-7 Archive System 420 TB to 3.3 PB managed by XenData6 Server software Functionality Standard File-Folder Interface Object Storage Interface Writes
More informationSXL-6500 Series: LTO Digital Video Archives
SXL-6500 Series: LTO Digital Video Archives Scalable LTO-7 Archive System 180 TB to 1.8 PB managed by XenData6 Server software Functionality Standard File-Folder Interface Object Storage Interface Writes
More informationXenData SX-10. LTO Video Archive Appliance. Managed by XenData6 Server Software. Overview. Compatibility
XenData SX-10 LTO Video Archive Appliance Managed by XenData6 Server Software Overview The XenData SX-10 appliance manages a robotic LTO tape library or stand-alone LTO tape drives and creates a cost effective
More informationCX-240: Hybrid Cloud Storage Server that Scales to 240TB of Local RAID plus Petabytes in Azure
CX-240: Hybrid Cloud Storage Server that Scales to 240TB of Local RAID plus Petabytes in Azure The CX-240 runs XenData Cloud File Gateway software on a Windows Server platform to store files on local RAID
More informationXenData SX-10 V2 LTO Video Archive Appliance
XenData SX-10 V2 LTO Video Archive Appliance Managed by XenData6 Server Software Overview The XenData SX-10 V2 appliance manages a robotic LTO tape library or stand-alone LTO tape drives and creates a
More informationXenData Product Brief: SX-550 Series Servers for LTO Archives
XenData Product Brief: SX-550 Series Servers for LTO Archives The SX-550 Series of Archive Servers creates highly scalable LTO Digital Video Archives that are optimized for broadcasters, video production
More informationThe USB connector can be used for firmware updates and storing the Library configuration.
Slide 0 Welcome to this Fujitsu Web Based Training. This module provides a technical introduction to the ETERNUS LT Tape Libraries. There are three models; LT 20 S2, LT40 S2 and LT60 S2. The model designation
More informationXenData Product Brief: SX-550 Series Servers for Sony Optical Disc Archives
XenData Product Brief: SX-550 Series Servers for Sony Optical Disc Archives The SX-550 Series of Archive Servers creates highly scalable Optical Disc Digital Video Archives that are optimized for broadcasters,
More informationSun StorageTek SL48 Tape Library Getting started
Sun StorageTek SL48 Tape Library Getting started IMPORTANT: Shipping Lock: The shippinglockmustberemovedfor the robotics to work properly. A robot move error is displayed if the shipping lock is not removed.
More informationETERNUS LT20 S2, LT40 S2 and LT60 S2
ETERNUS LT20 S2, LT40 S2 and LT60 S2 0 ETERNUS Entry Tape Libraries ETERNUS LT20 S2 ETERNUS LT40 S2 ETERNUS LT60 S2 1 Unpacking / Packing for Transportation Note: For shipping use only original packing!
More informationSun StorageTek SL24 Tape Autoloader Getting started
Sun StorageTek SL24 Tape Autoloader Getting started IMPORTANT: Shipping Lock: The shipping lock must be removed for the robotics to work properly. A robot move error is displayed if the shipping lock is
More informationactilib Library 2U Quick Start Guide
actilib Library 2U Quick Start Guide September, 2009 1 Contents 1 Contents...2 2 Warnings and symbols...3 2.1 Precautions...4 2.2 Product Warranty Caution...4 2.3 Rack stability...4 3 Unpacking the tape
More informationCisco MCS 7835-H2 Unified Communications Manager Appliance
Cisco MCS 7835-H2 Unified Communications Manager Appliance Cisco Unified Communications Solutions unify voice, video, data, and mobile applications on fixed and mobile networks enabling easy collaboration
More informationCisco MCS 7845-H1 Unified CallManager Appliance
Data Sheet Cisco MCS 7845-H1 Unified CallManager Appliance THIS PRODUCT IS NO LONGER BEING SOLD AND MIGHT NOT BE SUPPORTED. READ THE END-OF-LIFE NOTICE TO LEARN ABOUT POTENTIAL REPLACEMENT PRODUCTS AND
More informationIntegrated Ultra320 Smart Array 6i Redundant Array of Independent Disks (RAID) Controller with 64-MB read cache plus 128-MB batterybacked
Data Sheet Cisco MCS 7835-H1 THIS PRODUCT IS NO LONGER BEING SOLD AND MIGHT NOT BE SUPPORTED. READ THE END-OF-LIFE NOTICE TO LEARN ABOUT POTENTIAL REPLACEMENT PRODUCTS AND INFORMATION ABOUT PRODUCT SUPPORT.
More informationG3-APEX-ENT-32T. Apex technical specifications. Parts list
Apex Enterprise Hardware Installation 25 May 2018 G3APEXENT32T The G3APEXENT32T is best suited for any data center. Apex technical specifications System Deployment Base storage 32 TB Max storage 32 TB
More informationStorNext M440 Site Planning Guide
StorNext M440 Contents StorNext M440 Site Planning Guide Included with Your StorNext M440... 1 Professional Installation Requirements. 2 Site Requirements... 2 Shipping Information... 3 StorNext M440 System
More informationXenData X2500-USB. Installation & User Guide
XenData X2500-USB Installation & User Guide 2015 XenData Limited. All rights reserved. XenData is a trademark of XenData Limited. Updated: March 31, 2015 X2500-USB LTO-6 Archive System User Guide Contents
More informationHPE StoreEver MSL2024 Tape Library Getting Started Guide
HPE StoreEver MSL2024 Tape Library Getting Started Guide Abstract This guide provides information necessary to install the HPE StoreEver MSL2024 Tape Library. This guide is intended for system administrators
More informationCisco MCS 7825-I1 Unified CallManager Appliance
Data Sheet Cisco MCS 7825-I1 Unified CallManager Appliance THIS PRODUCT IS NO LONGER BEING SOLD AND MIGHT NOT BE SUPPORTED. READ THE END-OF-LIFE NOTICE TO LEARN ABOUT POTENTIAL REPLACEMENT PRODUCTS AND
More informationSuperLoader 3 Quick Start Guide
SuperLoader 3 Contents SuperLoader 3 Quick Start Guide The Quantum SuperLoader 3 is an automated storage and retrieval device consisting of a tape drive and up to two tape magazines holding up to eight
More informationG3-GS-4P-16T. Parts list G3-GS-4P-16T technical specifications. The G3-GS-4P-16T is best suited for small data centers or at your network edge.
G3GS4P16T Hardware Installation 23 Jul 2018 G3GS4P16T The G3GS4P16T is best suited for small data centers or at your network edge. 40Gb SR/LR/BiDi/Universal. For QSFP28, the QSFP28 tranceivers may be SR4,
More informationSuggested use: infrastructure applications, collaboration/ , web, and virtualized desktops in a workgroup or distributed environments.
The IBM System x3500 M4 server provides outstanding performance for your business-critical applications. Its energy-efficient design supports more cores, memory, and data capacity in a scalable Tower or
More informationSPECIFICATION FOR NETWORK ATTACHED STORAGE (NAS) TO BE FILLED BY BIDDER. NAS Controller Should be rack mounted with a form factor of not more than 2U
SPECIFICATION FOR NETWORK ATTACHED STORAGE (NAS) TO BE FILLED BY BIDDER S.No. Features Qualifying Minimum Requirements No. of Storage 1 Units 2 Make Offered 3 Model Offered 4 Rack mount 5 Processor 6 Memory
More informationG3-GS-8P-1152T. Parts list. G3-GS-8P-1152T technical specifications. The G3-GS-8P-1152T is best suited for 40 Gb data centers.
G3GS8P1152T Hardware Installation 23 Jul 2018 G3GS8P1152T The G3GS8P1152T is best suited for 40 Gb data centers. G3GS8P1152T technical specifications The technical specifications for the product are shown
More informationJunos WebApp Secure 5.0 Hardware Guide
Junos WebApp Secure 5.0 Hardware Guide Junos WebApp Secure 5.0 Hardware Guide This document contains a specification for the MWS1000 hardware appliance, as well as instructions for installation into a
More informationArtico NAS Storage Appliance Site Planning Guide
Artico NAS Storage Appliance Contents Artico NAS Storage Appliance Site Planning Guide Site Requirements... 2 Shipping Information... 2 System Components... 3 Specifications... 8 Selecting an Installation
More information1U Device Expansion Unit Configuration Guide
1U Device Expansion Unit Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper
More informationLot # 10 - Servers. 1. Rack Server. Rack Server Server
1. Rack Server Rack Server Server Processor: 1 x Intel Xeon E5 2620v3 (2.4GHz/6 core/15mb/85w) Processor Kit. Upgradable to 2 CPU Chipset: Intel C610 Series Chipset. Intel E5 2600v3 Processor Family. Memory:
More informationFidelis Network High Capacity Collector QUICK START GUIDE. Rev-I Collector Controller Appliances Based on HP DL360-G9 and DL380-G9 Platforms
Fidelis Network High Capacity Collector Rev-I Collector Controller Appliances Based on HP DL360-G9 and DL380-G9 Platforms 1. System Overview The Fidelis Collector is the security analytics database for
More informationCisco MCS 7845-I2 Unified Communications Manager Appliance
Cisco MCS 7845-I2 Unified Communications Manager Appliance Cisco Unified Communications Solutions unify voice, video, data, and mobile applications on fixed and mobile networks enabling easy collaboration
More informationFidelis Network Sensor Appliances QUICK START GUIDE
Fidelis Network Sensor Appliances Rev-H Fidelis Sensors (Direct, Internal, Web, and Mail Appliances) Based on HPE DL350-G9 and DL560-G9 Platforms 1. System Overview Fidelis Sensors are the components that
More informationThe Cisco MCS 7835-H2 can run any of the following Cisco applications:
Cisco MCS 7835-H2 Cisco Unified Communications Solutions unify voice, video, data, and mobile applications on fixed and mobile networks enabling easy collaboration every time from any workspace. Product
More informationN3220 Installation and Setup Instructions
IBM System Storage N3220 Installation and Setup Instructions Covering the N3220 model GA32-2202-01 Notices Mail comments to: IBM Corporation Attention Department GZW 9000 South Rita Road Tucson, AZ 85744-0001
More informationN3150 Installation and Setup Instructions
IBM System Storage N350 Installation and Setup Instructions Covering the N350 model GC27-426-0 Notices Mail comments to: IBM Corporation Attention Department GZW 9000 South Rita Road Tucson, AZ 85744-000
More informationXenData Product Brief: XenData6 Server Software
XenData Product Brief: XenData6 Server Software XenData6 Server is the software that runs the XenData SX-10 Archive Appliance and the range of SX-520 Archive Servers, creating powerful solutions for archiving
More informationTo the extent allowed by local law, the remedies provided in this Warranty Statement are the customer's sole and exclusive remedies.
Facilis Hub Server TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER FACILIS TECHNOLOGY NOR ITS THIRD PARTYSUPPLIERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT
More informationBarracuda NG Firewall F400 Revision B
F400 Standard Model F400 Sub-Model.F20 The standard model of Barracuda's NG Firewall F400 (Rev. B) comes with eight 10/100/1000 MBit RJ45 Ethernet ports and a single power supply. Other F400 model types
More informationHPE StoreEver 1/8 G2 Tape Autoloader Getting Started Guide
HPE StoreEver 1/8 G2 Tape Autoloader Getting Started Guide Abstract This guide provides information necessary to install the 1/8 G2 Tape Autoloader. This guide is intended for system administrators and
More informationCisco MCS 7815-I2 Unified CallManager Appliance
Data Sheet Cisco MCS 7815-I2 Unified CallManager Appliance THIS PRODUCT IS NO LONGER BEING SOLD AND MIGHT NOT BE SUPPORTED. READ THE END-OF-LIFE NOTICE TO LEARN ABOUT POTENTIAL REPLACEMENT PRODUCTS AND
More informationCISCO MEDIA CONVERGENCE SERVER 7825-I1
Data Sheet DATA SHEET CISCO MEDIA CONVERGENCE SERVER 7825-I1 Figure 1. Cisco MCS 7825-I THIS PRODUCT IS NO LONGER BEING SOLD AND MIGHT NOT BE SUPPORTED. READ THE END-OF-LIFE NOTICE TO LEARN ABOUT POTENTIAL
More informationHigh Performance Computing
21 High Performance Computing High Performance Computing Systems 21-2 HPC-1420-ISSE Robust 1U Intel Quad Core Xeon Server with Innovative Cable-less Design 21-3 HPC-2820-ISSE 2U Intel Quad Core Xeon Server
More informationCisco NAC Appliance Hardware Platforms
1 CHAPTER This chapter provides general information on the Cisco NAC Appliance network access control system, as well as hardware specifications for all Clean Access Manager (CAM) and Clean Access Server
More informationDell EMC Data Domain Hardware Features and Specifications Guide
Dell EMC Data Domain Hardware Features and Specifications Guide Version 6.1 302-004-902 REV 01 Copyright 2018 Dell Inc. or its subsidiaries. All rights reserved. Published July 2018 Dell believes the information
More informationEMC SYMMETRIX VMAX 40K SYSTEM
EMC SYMMETRIX VMAX 40K SYSTEM The EMC Symmetrix VMAX 40K storage system delivers unmatched scalability and high availability for the enterprise while providing market-leading functionality to accelerate
More informationEMC SYMMETRIX VMAX 40K STORAGE SYSTEM
EMC SYMMETRIX VMAX 40K STORAGE SYSTEM The EMC Symmetrix VMAX 40K storage system delivers unmatched scalability and high availability for the enterprise while providing market-leading functionality to accelerate
More informationImplementing a Digital Video Archive Based on the Sony PetaSite and XenData Software
Based on the Sony PetaSite and XenData Software The Video Edition of XenData Archive Series software manages a Sony PetaSite tape library on a Windows Server 2003 platform to create a digital video archive
More informationHPE LTO Ultrium 30750,15000, 6250, 3000, 1760, and 920 Internal Tape Drives Start Here
HPE LTO Ultrium 30750,15000, 6250, 3000, 1760, and 920 Internal Tape Drives Start Here Abstract This document describes how to install a StoreEver LTO Ultrium SAS internal tape drive and is intended for
More informationQuantum DXi4700 Capacity Upgrade Guide
Quantum DXi4700 Capacity Upgrade Guide This document contains the following topics: Introduction 2 Preparing for the Capacity Upgrade 6 Capacity Upgrade Overview 7 Determining the DXi4700 Model 9 Unpacking
More informationHPE StoreEver MSL6480 Tape Library Getting Started Guide
HPE StoreEver MSL6480 Tape Library Getting Started Guide Abstract This guide provides information on installing the HPE StoreEver MSL6480 Tape Library. This guide is intended for system administrators
More informationOver 70% of servers within a data center are not connected to Fibre Channel SANs for any of the following reasons:
Overview The provides modular multi-protocol SAN designs with increased scalability, stability and ROI on storage infrastructure. Over 70% of servers within a data center are not connected to Fibre Channel
More informationNEC EXPRESS5800/R320a-E4 Configuration Guide
NEC EXPRESS5800/R320a-E4 Configuration Guide Linux model Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast
More informationThe list below shows items not included with a SmartVDI-110 Server. Monitors Ethernet cables (copper) Fiber optic cables Keyboard and mouse
SmartVDI-110 Server Quick Start Guide Container Contents Included in container The list below shows components included in a SmartVDI-110 container. SmartVDI-110 Server Chassis mounting rails and hardware
More informationN3240 Installation and Setup Instructions
IBM System Storage N3240 Installation and Setup Instructions Covering the N3240 model GA32-2203-01 Notices Mail comments to: IBM Corporation Attention Department GZW 9000 South Rita Road Tucson, AZ 85744-0001
More informationQUICK START GUIDE. Fidelis Network K2 Appliances. Rev-I K2 (HP DL360-G10) Platforms.
Fidelis Network K2 Appliances Rev-I K2 (HP DL360-G10) Platforms 1. System Overview The Fidelis K2 appliance is the central component for command and control of Fidelis Network components. With K2, you
More informationapple Service Source Xserve RAID 17 March Apple Computer, Inc. All rights reserved.
apple Service Source Xserve RAID 17 March 2003 2003 Apple Computer, Inc. All rights reserved. apple Service Source Basics Xserve RAID 2003 Apple Computer, Inc. All rights reserved. Overview Xserve RAID
More informationPanzura Freedom Filer Installation Guide
Panzura Freedom Filer Installation Guide Release 7.0 August 2017 Copyright 2017 Panzura, Inc. All rights reserved. The information in this manual is subject to change without notice. Originated in the
More informationapple Service Source Xserve RAID Xserve RAID and Xserve RAID (SFP) Updated: 25 May Apple Computer, Inc. All rights reserved.
apple Service Source Xserve RAID Xserve RAID and Xserve RAID (SFP) Updated: 25 May 2004 2003 Apple Computer, Inc. All rights reserved. apple Service Source Basics Xserve RAID 2003 Apple Computer, Inc.
More informationA6106D/A6106H Blade PC Quick Start Guide
A6106D/A6106H Blade PC Quick Start Guide A6106D/A6106H components The table and picture below show each A6106D and A6106H Blade PC component. Number Part Function 1 Front panel Provides indicators and
More informationHostEngine 3U Host Computer User Guide
HostEngine 3U computer features Intel Xeon 3.2GHz or lower-speed single- or dual-processor(s) with the Intel C602 chipset. HostEngine 3U provides four PCI Express (PCIe) Gen 3.0 x16 expansion slots. Each
More informationQ80 Tape Library. Installation and Operations Manual. Document No Rev. 01
Q80 Tape Library Document No. 511013 Rev. 01 Copyright Copyright 2016, QUALSTAR. All rights reserved. This document and the information contained herein are the property of QUALSTAR. No part of this document
More informationThe Genesis HyperMDC is a scalable metadata cluster designed for ease-of-use and quick deployment.
The Genesis HyperMDC is a scalable metadata cluster designed for ease-of-use and quick deployment. IPMI Control Dual Power Supplies Enhanced Metadata Uptime Storage Up to 1.3M IOPS and 5,500 MBps throughput
More informationManager Appliance Quick Start Guide
Revision D Manager Appliance Quick Start Guide The Manager Appliance runs on a pre-installed, hardened McAfee Linux Operating System (MLOS) and comes pre-loaded with the Network Security Manager software.
More informationQUICK START GUIDE 7000 SERIES DEVICES. 3D7010/7020/7030 (Chassis: CHRY-1U-AC) 3D7115/7125, AMP7150 (Chassis: GERY-1U-4C8S-AC)
Thank you for choosing Sourcefire! Before installing this device, download and follow the instructions in the Sourcefire Support Welcome Kit (https://support.sourcefire.com) to get started with Sourcefire
More informationQUICK START GUIDE. Fidelis Collector SA. Rev-I Collector SA (HP DL360-G10) Platforms.
Fidelis Collector SA Rev-I Collector SA (HP DL360-G10) Platforms 1. System Overview The Fidelis Collector is the security analytics database for Fidelis Network. The Fidelis Collector SA receives network
More informationHostEngine 4U Host Computer User Guide
HostEngine 4U Host Computer User Guide HostEngine 4U computer features Intel Xeon E5-2600v3 Series (Haswell) dual-processors with the Intel C612 chipset. HostEngine 4U provides four PCI Express (PCIe)
More informationDrobo B810n Getting Started Guide
Drobo B810n Getting Started Guide Table of Contents 1: Before You Begin... 4 1.1 Product features at a glance... 4 1.2 Checking box contents... 5 1.3 Checking system requirements... 5 1.4 Checking hardware
More informationM8801A / M8802A ACL Tape Library Installation and User s Guide
M8801A / M8802A ACL Tape Library Installation and User s Guide Abstract This guide provides information about installing, operating, and maintaining the M8801A and M8802A on HP NonStop Integrity NS-series
More informationFidelis Network High Capacity Collector QUICK START GUIDE. Rev-H Collector Controller Appliances Based on HP DL360-G9 and DL380-G9 Platforms
Fidelis Network High Capacity Collector Rev-H Collector Controller Appliances Based on HP DL360-G9 and DL380-G9 Platforms 1. System Overview The Fidelis Collector is the security analytics database for
More informationCisco MCS 7828-I5 Unified Communications Manager Business Edition 5000 Appliance
Cisco MCS 7828-I5 Unified Communications Manager Business Edition 5000 Appliance Cisco Unified Communications Solutions unify voice, video, data, and mobile applications on fixed and mobile networks, enabling
More informationHostEngine 4U Host Computer User Guide
HostEngine 4U Host Computer User Guide HostEngine 4U computer features Intel Xeon E5-2600v4 (Broadwell) Series dual-processors with the Intel C612 chipset. HostEngine 4U provides four PCI Express (PCIe)
More informationQuickSpecs. Overview. Compaq ProLiant ML770. What's New
Overview What's New The ProLiant ML770 is a 2-cabinet system; one cabinet houses the CPUs and Memory, the second cabinet houses the system support components. System Cabinet: A 32 processor capable system
More informationIBM. Rack Installation Instructions
IBM Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When installing your server in a rack cabinet, consider the following:
More informationQUICK START GUIDE 7000 SERIES DEVICES
QUICK START GUIDE 7000 SERIES DEVICES Thank you for choosing Sourcefire! Before installing this device, download and follow the instructions in the Sourcefire Support Welcome Kit (https://support.sourcefire.com)
More informationM1032W Engineering Workstation. The list below shows components included in an M1032W Engineering Workstation container.
M1032W Engineering Workstation Container Contents Included in container The list below shows components included in an M1032W Engineering Workstation container. M1032W Engineering Workstation Chassis mounting
More informationM1034W Engineering Workstation
M1034W Engineering Workstation Container Contents Included in container The list below shows components included in an M1034W Engineering Workstation container. M1034W Engineering Workstation Chassis mounting
More informationGigaStor Upgradeable 2U. User Guide
GigaStor Upgradeable 2U User Guide Table of Contents Chapter 1: Installation...1 Unpacking and inspecting the parts...1 Installing the drives in your GigaStor...1 How to handle hard drives properly...
More informationHostEngine 4U Host Computer User Guide
HostEngine 4U Host Computer User Guide HostEngine 4U computer features Intel Xeon E5-2600v3 Series (Haswell) dual-processors with the Intel C612 chipset. HostEngine 4U provides four PCI Express (PCIe)
More informationInstalling the IPS 4345 and IPS 4360
CHAPTER 4 Installing the IPS 4345 and IPS 4360 Contents This chapter describes the Cisco IPS 4345 and the IPS 4360, and includes the following sections: Installation Notes and Caveats, page 4-1 Product
More informationTECHNICAL SPECIFICATIONS + TECHNICAL OFFER
ANNEX II + III : TECHNICAL SPECIFICATIONS + TECHNICAL OFFER Contract title : Supply of Information & Communication Technology Hardware Publication reference: 2017/386304 10/1/1.1/1.2.2a p 1 / Columns 1-2
More informationNEC Express5800/R120h-2M System Configuration Guide
NEC Express5800/R120h-2M System Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and
More informationCisco MCS 7815-I1 Unified CallManager Appliance
Data Sheet Cisco MCS 7815-I1 Unified CallManager Appliance THIS PRODUCT IS NO LONGER BEING SOLD AND MIGHT NOT BE SUPPORTED. READ THE END-OF-LIFE NOTICE TO LEARN ABOUT POTENTIAL REPLACEMENT PRODUCTS AND
More informationA6106SLW Blade PC Quick Start Guide
A6106SLW Blade PC Quick Start Guide A6106SLW components The table and picture below show each major A6106SLW Blade PC component. Number Part Function 1 Front panel Provides indicators and power-related
More informationIntroducing the Cisco 1121 Secure Access Control System Hardware
CHAPTER 2 Introducing the Cisco 1121 Secure Access Control System Hardware This chapter gives an overview of the Cisco 1121 Secure Access Control System (CSACS-1121) hardware. It covers the appliance hardware,
More informationCisco UCS S3260 System Storage Management
Storage Server Features and Components Overview, page 1 Cisco UCS S3260 Storage Management Operations, page 9 Disk Sharing for High Availability, page 10 Storage Enclosure Operations, page 15 Storage Server
More informationReadyNAS OS 6 Desktop Storage Systems
ReadyNAS OS 6 Desktop Storage Systems Hardware Manual Models: 102 104 312 314 350 East Plumeria Drive San Jose, CA 95134 USA March 2013 202-11206-02 v1.0 Support Thank you for selecting NETGEAR products.
More informationSolution Brief: Archiving with Harmonic Media Application Server and ProXplore
Solution Brief: Archiving with Harmonic Media Application Server and ProXplore Summary Harmonic Media Application Server (MAS) provides management of content across the Harmonic server and storage infrastructure.
More informationNEC Express5800/R120h-2E System Configuration Guide
NEC Express5800/R120h-2E System Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and
More informationXenData6 Workstation User Guide
XenData6 Workstation User Guide Version 6.21 2011-2016 XenData Limited. All rights reserved. XenData is a trademark of XenData Limited. Document last modified date: October 5, 2016 XenData6 Workstation
More informationEXN4000 Storage Expansion Unit Installation and Setup Instructions
IBM System Storage EXN4000 Storage Expansion Unit Installation and Setup Instructions GC27-2079-02 IBM System Storage EXN4000 Storage Expansion Unit Installation and Setup Instructions GC27-2079-02 Notices
More informationHPE StoreEver 1/8 G2 Tape Autoloader User and Service Guide
HPE StoreEver 1/8 G2 Tape Autoloader User and Service Guide Abstract This guide provides information on installing, configuring, upgrading, and troubleshooting the tape autoloader. This guide is intended
More informationMcAfee Network Security Platform
NTBA Appliance T-1200 and T-600 Quick Start Guide Revision C McAfee Network Security Platform This guide is a high-level description of how to install and configure McAfee Network Threat Behavior Analysis
More informationCisco MCS 7815-I2. Serviceable SATA Disk Drives
Data Sheet Cisco MCS 7815-I2 THIS PRODUCT IS NO LONGER BEING SOLD AND MIGHT NOT BE SUPPORTED. READ THE END-OF-LIFE NOTICE TO LEARN ABOUT POTENTIAL REPLACEMENT PRODUCTS AND INFORMATION ABOUT PRODUCT SUPPORT.
More information<Insert Picture Here> Exadata Hardware Configurations and Environmental Information
Exadata Hardware Configurations and Environmental Information Revised July 1, 2011 Agenda Exadata Hardware Overview Environmental Information Power InfiniBand Network Ethernet Network
More informationHP P6300/P6500 EVA Fibre Channel Controller Replacement Instructions
HP P6300/P6500 EVA Fibre Channel Controller Replacement Instructions About this document For the latest documentation, go to http:// www.hp.com/support/manuals, and select your product. The information
More information