TA Document IEEE1394 Interface Implementation Guideline TV Device for Japanese BS/CS Digital Broadcasting System 1.0
|
|
- Avice Watson
- 5 years ago
- Views:
Transcription
1 TA Document IEEE1394 Interface Implementation Guideline TV Device for Japanese BS/CS Digital Broadcasting System 1.0 December 15, 2003 Sponsored by: 1394 Trade Association Accepted for Release by: 1394 Trade Association Board of Directors. Abstract: This document provides the IEEE 1394 implementation guideline for TV sets which support Japanese BS/CS digital broadcasting system. Keywords: TV Copyright by the 1394 Trade Association South Main Street, Suite 100, Grapevine, TX 76051, USA All rights reserved. Permission is granted to members of the 1394 Trade Association to reproduce this document for their own use or the use of other 1394 Trade Association members only, provided this notice is included. All other rights reserved. Duplication for sale, or for commercial or for-profit use is strictly prohibited without the prior written consent of the 1394 Trade Association.
2 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, Trade Association Specifications are developed within Working Groups of the 1394 Trade Association, a non-profit industry association devoted to the promotion of and growth of the market for IEEE 1394-compliant products. Participants in working groups serve voluntarily and without compensation from the Trade Association. Most participants represent member organizations of the 1394 Trade Association. The specifications developed within the working groups represent a consensus of the expertise represented by the participants. Use of a 1394 Trade Association Specification is wholly voluntary. The existence of a 1394 Trade Association Specification is not meant to imply that there are not other ways to produce, test, measure, purchase, market or provide other goods and services related to the scope of the 1394 Trade Association Specification. Furthermore, the viewpoint expressed at the time a specification is accepted and issued is subject to change brought about through developments in the state of the art and comments received from users of the specification. Users are cautioned to check to determine that they have the latest revision of any 1394 Trade Association Specification. Comments for revision of 1394 Trade Association Specifications are welcome from any interested party, regardless of membership affiliation with the 1394 Trade Association. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Interpretations: Occasionally, questions may arise about the meaning of specifications in relationship to specific applications. When the need for interpretations is brought to the attention of the 1394 Trade Association, the Association will initiate action to prepare appropriate responses. Comments on specifications and requests for interpretations should be addressed to: Editor, 1394 Trade Association 1111 South Main Street, Suite 100 Grapevine, TX USA 1394 Trade Association Specifications are adopted by the 1394 Trade Association without regard to patents which may exist on articles, materials or processes or to other proprietary intellectual property which may exist within a specification. Adoption of a specification by the 1394 Trade Association does not assume any liability to any patent owner or any obligation whatsoever to those parties who rely on the specification documents. Readers of this document are advised to make an independent determination regarding the existence of intellectual property rights, which may be infringed by conformance to this specification. Page 2 Copyright 2004, 1394 Trade Association. All rights reserved.
3 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline 1.0 Table of Contents 1. Overview Purpose Scope References Definitions Conformance Levels Glossary of Terms System Overview Subunit Configuration Operation Mode of Unit Implementation of Tuner Subunit for BS/CS Digital Broadcasting POWER Control Command Implementation of Tuner Subunit for UV Analog Broadcasting Implementation of Monitor Subunit Implementation of Plug AV/C Commands Support Levels of AV/C Commands Implementation of Supported Commands POWER Command PLUG INFO Status Command Implementation of Bulletin Board Subunit Implementation of Unit Internal Signal Connection AV/C Command Support Levels of AV/C Commands Implementation of Supported Commands Vendor-dependent Command Control of Isochronous Connection Control of Isochronous Connection for a Input Plug Control of Isochronous Connection for the Output Plug Other rule Implementation of Configuration ROM Digital/Analog switchover function (sink device) (optional) Support Levels of commands The method to determine the source device supporting digital/analog switchover Behavior taken when the AV/C command is received Operation caused by each trigger Example of Sequence...48 Copyright 2004, 1394 Trade Association. All rights reserved. Page 3
4 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, 2003 List of Figures Figure 4-1 Subunits configuration of DTV for BS/CS digital broadcasting system...10 Figure 4-2 The state transition of DTV Unit operation mode...12 Figure 9-1 DTV internal signal connection model...22 Figure 9-2 bcc/pcc state transition diagram when input-selection is enabled...41 Figure 9-3 Implementation example of Configuration ROM...44 Figure 9-4 Sequence of New registration with the preset entry being vacant...48 Figure 9-5 Sequence of Re-registration...49 Figure 9-6 Sequence of New registration with preset entry already full...49 Figure 9-7 Sequence of Cancellation...50 Figure 9-8 Sequence of Cancellation which is failed...50 Figure 9-9 Sequence of Digital/Analog Switchover...51 Figure B.1 The State Transition of Unit Operation Mode...55 Figure B.2 LC-30BV3, PZ-50BD3, PZ-43BD3 Model...56 Figure B.3 HD32-LS1/LS2/LS3 Model...58 Figure B.4 The state transition of Unit operation mode...61 Figure B.5 Internal signal connection model of D10 series...62 Figure B.6 Internal signal connection model of KDF/KD series...65 Figure B.7 Internal signal connection model of TOSHIBA legacy devices...67 Page 4 Copyright 2004, 1394 Trade Association. All rights reserved.
5 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline 1.0 List of Tables Table 4-1 The example of basic behaviors for each Unit operation mode...13 Table 7-1 Support Levels of Monitor Subunit commands...17 Table 7-2 Response for POWER status command...18 Table 7-3 Response for POWER notify command...19 Table 7-4 Response for PLUG INFO status command...20 Table 9-1 Assignment of a plug number...24 Table 9-2 Support Levels of Unit commands...25 Table 9-3 Response for CONNECT status command...26 Table 9-4 Response Value of CONNECT status command (inquiry of source plug)...27 Table 9-5 Response for CONNECTIONS status command...30 Table 9-6 The contents of Response Frame of CONNECTIONS status command...31 Table 9-7 Response for SUBUNIT INFO status command...35 Table 9-8 Response for UNIT INFO status command...36 Table 9-9 Response for POWER control command...37 Table 9-10 operation to POWER control command...37 Table 9-11 Response for POWER status command...38 Table 9-12 Response for POWER notify command...39 Table 9-13 Response for PLUG INFO status command...40 Table 9-14 Support Levels of CCM command of the sink device...45 Table B.1 Supported CONNECT status command (inquiry of source plug)...63 Table B.2 Content of response to CONNECT status command ( inquiry of source plug)...63 Table B.3 Supported CONNECT status command (inquiry of source plug)...66 Table B.4 Content of response to CONNECT status command ( inquiry of source plug)...66 Table B.5 Supported CONNECT status command (inquiry of source plug)...68 Table B.6 Content of response to CONNECT status command ( inquiry of source plug)...68 Copyright 2004, 1394 Trade Association. All rights reserved. Page 5
6 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, 2003 This page is left intentionally blank Page 6 Copyright 2004, 1394 Trade Association. All rights reserved.
7 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline Overview 1.1 Purpose The purpose of this guideline is to clarify the IEEE1394 implementation which is not described in detail in the related AV/C command specifications and ARIB Standard. TV for BS/CS Digital Broadcasting System means a DTV which has the function to receive broadcast service of either BS digital broadcasting or CS digital broadcasting, or both. 1.2 Scope The scope of this guideline is to specify the behavior of the TV which complies with ARIB Standard for Receiver for Digital Broadcasting B (ARIB 3.1[R10]) and has a capability to decode MPEG2-TS signals, which are received from both 1394 interface and the antenna for digital broadcasting, and output the decoded signals through analogue output. This guideline specifies following functions through IEEE1394, Control of power status, and inquiry of the power status. Control of tuning, and inquiry of the tuning status. Inquiry of the input source connected to TV monitor. The function which outputs a selected service through IEEE1394 by control from external device. Following functions are optional and beyond the scope of this guideline. This guideline does not specify the behavior of following functions. The function which changes the DTV status to 1394 input state. The function which makes partial stream from MPEG2-TS stream received from the bus. The function which outputs and displays two or more services simultaneously. The function which outputs the stream from the Tuner Subunit to 1394 bus and analog output plug(s) while decoding and outputting the MPEG2-TS received from the 1394 bus. The function which outputs two or more isochronous stream simultaneously. When a DTV has supports both BS and CS broadcasting, the DTV selects one service from BS signal or CS signal. A DTV, which has capability to select both services of BS and CS simultaneously, is beyond the scope of this guideline. This guideline allows two kinds of implementations. One is based on AV/C Digital Interface Command Set, General Specification Version 4.1 (AV/C General 4.1 [R13]) and AV/C Descriptor Mechanism Specification Version 1.0 (AV/C Descriptor 1.0 [R14]). The other is based on AV/C Digital Interface Command Set, General Specification Version 3.0 (AV/C General 3.0 [R5]). Although this guideline is described based on the implementation according to AV/C General 4.1 [R13] and AV/C Descriptor 1.0 [R14], it corresponds also to implementation according to AV/C General 3.0 [R5] unless otherwise specified. The portion, that has any difference between two implementations, is described expressly with the version number applied. Copyright 2004, 1394 Trade Association. All rights reserved. Page 7
8 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, References This guideline refers to the following specifications: [R1] [R2] [R3] [R4] IEEE Std , IEEE Standard for a High Performance Serial Bus IEEE Std. 1394a-2000, IEEE Standard for a High Performance Serial Bus (Amendment) IEC , Consumer audio/video equipment Digital interface Part 1: General IEC , Consumer audio/video equipment Digital interface Part 4: MPEG2-TS data transmission [R5] 1394TA, AV/C Digital Interface Command Set, General Specification Version 3.0 [R6] 1394TA, Enhancements to the AV/C General Specification 3.0 Version 1.1. [R7] 1394TA, AV/C Tuner Model and Command Set Version 1.0 [R8] [R9] 1394TA, AV/C Tuner Broadcast System Specification - Digital Video Broadcast (DVB) Version TA, Enhancements to the AV/C Tuner Broadcast System Specification - Digital Video Broadcast (DVB) Version 1.0 [R10] ARIB Standard for Receiver for Digital Broadcasting B [R11] 1394TA, Configuration ROM for AV/C Devices 1.0 [R12] 1394TA, AV/C Tuner Subunit Model and Command Set Version 2.0 [R13] 1394TA, AV/C Digital Interface Command Set, General Specification Version 4.1 [R14] 1394TA, AV/C Descriptor Mechanism Specification Version 1.0 [R15] [R16] [R17] [R18] Supplement to IEEE1394 Interface Implementation Guideline, Tuner Subunit for Japanese BS/CS Digital Broadcasting System Supplement to IEEE1394 Interface Implementation Guideline, Tuner Subunit for UV Analog Broadcasting System Supplement to IEEE1394 Interface Implementation Guideline, Bulletin Board Subunit 1394TA, Clarification and Implementation Guideline for Isochronous Connection Management of IEC Page 8 Copyright 2004, 1394 Trade Association. All rights reserved.
9 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline Definitions 3.1 Conformance Levels expected: A key word used to describe the behavior of the hardware or software in the design models assumed by this Specification. Other hardware and software design models may also be implemented may: A key word that indicates flexibility of choice with no implied preference shall: A key word indicating a mandatory requirement. Designers are required to implement all such mandatory requirements should: A key word indicating flexibility of choice with a strongly preferred alternative. Equivalent to the phrase is recommended reserved fields: A set of bits within a data structure that are defined in this specification as reserved, and are not otherwise used. Implementations of this specification shall zero these fields. Future revisions of this specification, however, may define their usage reserved values: A set of values for a field that are defined in this specification as reserved, and are not otherwise used. Implementations of this specification shall not generate these values for the field. Future revisions of this specification, however, may define their usage. NOTE The IEEE is investigating whether the may, shall, should and possibly expected terms will be formally defined by IEEE. If and when this occurs, draft editors should obtain their conformance definitions from the latest IEEE style document. 3.2 Glossary of Terms TV for BS/CS digital broadcasting system (DTV): The Japanese receiving sets for BS/CS digital broadcasting that build in TV monitor. Copyright 2004, 1394 Trade Association. All rights reserved. Page 9
10 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, System Overview 4.1 Subunit Configuration The Subunits configuration of TV for BS/CS digital broadcasting system which complies with this guideline is shown in Figure 4-1. In this guideline, implementation of Tuner Subunit for BS/CS digital broadcasting system and Monitor Subunit are mandatory. Although implementation of Bulletin Board Subunit is optional, this guideline recommends implementing Bulletin Board Subunit because other device can not detect the reservation confliction without Bulletin Board Subunit. Although implementation of Tuner Subunit for UV analog broadcasting system is optional, refer to chapter 6 about the implementation method if implemented. DTV Unit for BS/CS digital broadcasting system Tuner Subunit (for BS/CS digital broadcasting system) Tuner Subunit (for UV analog broadcasting system) Monitor Subunit Bulletin Board Subunit Figure 4-1 Subunits configuration of DTV for BS/CS digital broadcasting system The implementation of Unit and each Subunit are described in the following chapter. 4.2 Operation Mode of Unit This section describes several Unit operation modes and the state transition between the unit modes. The outline of the state transition of DTV, which has the function of record-reservation and view reservation, is shown in Figure 4-2. In this guideline, the definitions of Record-reservation and Viewreservation are described below, and these reservations are called internal reservation. Record-reservation: Reservation made by DTV itself, which is to record specified program(s) using recording device outside the DTV at the specified date and time. At the starting time of the Record reservation, DTV select the specified program and control the recording device to record the program. If the DTV is power off state at the starting time, it changes its power state to on, and executes above mentioned control. Page 10 Copyright 2004, 1394 Trade Association. All rights reserved.
11 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline 1.0 View-reservation: Reservation made by DTV itself, which is to view specified program(s) at the specified date and time. At the starting time of the View reservation, DTV select the specified program. It is vender dependent whether the DTV has the functions of Recording-reservation and/or Viewreservation. When it does not have these functions, the transitions to the state of reservation execution in Figure 4-2 are not performed. On the other hand, the reservation registered in the Bulletin Board Subunit of DTV from external device is called external reservation in this guideline. The state controlled by external device during the period of external reservation is called external reservation execution. It is vendor dependent whether the DTV distinguish the state external reservation execution from the state of usual power on state and has some restrictions of its operation. (Note that Figure 4-2 has no distinctions). In case of the DTV is power off state, the DTV is under one of tow power off states called i.link standby" and "i.link not standby". The definition of each state is as follows. i.link standby: The state where the DTV is existing on 1394 bus as a node and where it can receive AV/C commands. i.link non standby: The state where the DTV is not existing on 1394 bus as a node, or the state where it can not receive AV/C commands although the device is existing on 1394 bus as a node (repeater state). The selection of i.link standby or i.link non standby is possible only by manual operation of the DTV during power on state by the user. The selection can not be done by the AV/C commands via 1394 bus. Note that a DTV that is in the repeater state may change its state to "i.link standby" state by receiving Link-on packet. Copyright 2004, 1394 Trade Association. All rights reserved. Page 11
12 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, 2003 Usual power on state. Unit: Power on Monitor: Power on Tuner Subunit: Power on Starts View-reservation Starts Record-reservation - Finishes Internal reservation *6 - Channel selection by front panel or IR remote commander*4 - Channel selection by AV/C command *4 Power on state under internal reservation execution (Under View-reservation or Record-reservation) Unit: Monitor: Tuner Subunit: Power on Power on Power on - Power on by front panel or IR remote commander - Power on by AV/C command to Unit *1*2 - Power off by front panel or IR remote commander - Power off by AV/C command to Unit Usual Tuner on / Monitor off state. Unit: Monitor: Tuner Subunit: - Power on by front panel or IR remote commander - Power on by AV/C command to Unit*2 Power on Power off Power on Starts Record -reservation - Power on by front panel or IR remote commander - Power on by AV/C command to Unit *2 - Power off by front panel or IR remote commander.*3 ( Record-reservation ) Tuner on / Monitor off state under internal reservation execution (Record-reservation). Unit: Power on Monitor: Power off Tuner Subunit: Power on Starts Viewreservation *2 - Power off by front panel or IR remote commander.*3 ( View-reservation ) - Power off by AV/C command to Unit (Record-reservation) *3 Finishes Viewreservation *5 - Power on by AV/C command to Subunit *1 - Power off by AV/C command to Unit or Subunit Starts Recordreservation Finishes Recordreservation - Power off by AV/C command to Unit or Subunit *3 Power off (i.link standby / i.link non standby) Unit: Monitor: Tuner Subunit: Power off Power off Power off Figure 4-2 The state transition of DTV Unit operation mode Transition condition as for main power on/off is applied only in case the power button on the DTV is equivalent to that of remote controller. In the state of Usual Unit Power on or Unit Power on during the execution of Internal reservation, POWER off control command addressed to Tuner Subunit is not accepted.(returns REJECTED) As Tuner Subunit in this figure is for BS/CS digital broadcasting, POWER command addressed to Subunit shall be issued to this Tuner Subunit. *1) Only when DTV is set up with i.link standby. Page 12 Copyright 2004, 1394 Trade Association. All rights reserved.
13 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline 1.0 *2) It is vender dependent to permit this transition. *3) The reservation under execution is forced to terminate. It is vender dependent to permit this transition. *4) Although the transition is possible only during View-reservation execution, it is vender dependent to permit this transition itself. *5) Although this transition can be made only when the state is "Power off" at the time of starting view-reservation, it is vendor dependent to permit this transition. *6) In the case of finishing view-reservation, when the state was "Power off" at the time of starting view-reservation, the state is transitioned to "Power off" or "Usual power on state". As shown in Figure 4-2, the power state of Unit and Tuner Subunit is always the same. Therefore, when one of the power states of Unit or Tuner Subunit is changed by POWER control command, the other power state shall be changed by the internal operation. The basic behaviors caused by user operation and AV/C control commands in each Unit operation mode are shown in Table 4-1. Table 4-1 The example of basic behaviors for each Unit operation mode Operation mode AV/C control command User operation by front panel or IR remote commander (informational)*2 Copyright 2004, 1394 Trade Association. All rights reserved. Page 13
14 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, 2003 Usual Unit Power on Accept. However REJECTED is returned to POWER off command addressed to Tuner Subunit. Accept. Usual Tuner on / CRT off Accept. Accept. Unit Power on during the execution of Internal reservation (Recordingreservation) Tuner on / CRT off during the execution of Internal reservation (Recording-reservation) Unit Power on during the execution of Internal reservation (Viewreservation) Power off (i.link standby) Power off (i.link non standby) DSIT control command and POWER off control command addressed to Tuner Subunit is rejected Other commands are accepted. However, depending on a model, REJECTED is returned to POWER off control command address to Unit. DSIT control command is rejected. Other commands are accepted. However, depending on a model, REJECTED is returned to POWER on/off control command addressed to Unit and POWER off control command addressed to Tuner Subunit. Accept. However POWER off control command addressed to Tuner Subunit is rejected. Other commands are accepted. However, depending on a model, REJECTED is returned to POWER off control command addressed to Unit and DSIT control command. Only DSIT command is rejected. Other commands are accepted. Reject*1 Reject the user operation except for a power key. Reject the user operation except for a power key. Accept. However, depending on a model, Tuning operation is not available. Reject the user operation except for a power key. Reject the user operation except for a power key. * 1 The state where the DTV is not existing on 1394 bus as a node, or in the repeater status although it is existing on 1394 bus as a node. * 2 The column of User operation by front panel or IR remote commander is just reference, so other operations not described here can be possible. Page 14 Copyright 2004, 1394 Trade Association. All rights reserved.
15 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline Implementation of Tuner Subunit for BS/CS Digital Broadcasting The TV for BS/CS digital broadcasting system complies with this guideline shall implement Tuner Subunit for BS/CS digital broadcasting system according to Supplement to IEEE1394 Interface Implementation Guideline, Tuner Subunit for Japanese BS/CS Digital Broadcasting System[R15]. In addition, The Tuner Subunit shall also be implemented according to the rules described in this chapter. 5.1 POWER Control Command In this guideline, the following rules are added to the rules described in Supplement to IEEE1394 Interface Implementation Guideline, Tuner Subunit for Japanese BS/CS Digital Broadcasting System[R15] regarding the behavior of the POWER control command. Rule When the target returns the ACCEPTED response for POWER control command and changes the power state of Tuner Subunit, it shall change the power state of Unit simultaneously by internal operation. In the model described in Figure 4-1 of this guideline, the power state of Unit and Tuner Subunit are always the same by applying above described rule. For details, refer to Section 4.2. Copyright 2004, 1394 Trade Association. All rights reserved. Page 15
16 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, Implementation of Tuner Subunit for UV Analog Broadcasting In case a TV has a built-in tuner for UV analog broadcasting, there are three ways to implement Tuner Subunit. Implementation 1. Implementation with support of Subunit commands Implementation should conform to the specification in Supplement to IEEE1394 Interface Implementation Guideline, Tuner Subunit for UV Analog Broadcasting System [R16]. Implementation 2. Implementation without support of Subunit commands Since commands addressed to the Subunit are not supported, any control (tuning etc ) or getting status of tuner by AV/C commands is impossible. With the notification of the existence of this Subunit by SUBUNIT INFO command, a controller can know correct internal connection by CONNECT status command. Implementation 3. Implementation with substitution by external input plug Not showing the existence of Subunit by SUBUNIT INFO command. That is, a controller cannot recognize the existence of the tuner for analog broadcasting. In this implementation, Tuner Subunit pretends to receive the signal from external input plug during the use of UV analog tuner (refer to for details). Page 16 Copyright 2004, 1394 Trade Association. All rights reserved.
17 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline Implementation of Monitor Subunit 7.1 Implementation of Plug In this guideline, Monitor Subunit shall implement at least one input plug (destination plug) as input for a main screen of TV monitor, and this input plug is assigned to 0 as the plug number. 7.2 AV/C Commands This section describes the list of Monitor Subunit AV/C commands supported by the DTV and implementation of each command Support Levels of AV/C Commands Table 7-1 shows the support levels of Monitor Subunit commands specified in this guideline and 1394TA Std. Although Subunit Identifier Descriptor is specified in 1394TA Std, this guideline treats the support of descriptor as option and does not specify the implementation. The shaded portion in the table means optional or recommended commands to which this guideline does not specify any rules. Since the behavior of Specific inquiry and General inquiry command is specified in AV/C General 4.1[R13], description is omitted here. Table 7-1 Support Levels of Monitor Subunit commands Monitor Subunit command opcode Support Levels of this guideline Support Levels of 1394 TA Standard Control Status Notify C S N FUNCTION BLOCK B8 16 * * * * * * OPEN DESCRIPTOR O O O O O O READ DESCRIPTOR O O WRITE DESCRIPTOR 0A 16 O O O O SEARCH DESCRIPTOR 0B 16 O O OBJECT NUMBER SELECT 0D 16 O O O O O O POWER B2 16 O M O O O R RESERVE O O O O O R PLUG INFO M O M: Mandatory O: Option R: Recommended : Not Defined or Not Supported *: The support level of the command depends on its operand Implementation of Supported Commands This section describes implementation of AV/C commands (status, notify) addressed to Monitor Subunit supported by the DTV. Copyright 2004, 1394 Trade Association. All rights reserved. Page 17
18 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, POWER Command status command [Mandatory] The structure of POWER command is specified in Section 11.1 of AV/C General 4.1[R13]. The response for POWER status command is shown in Table 7-2. Table 7-2 Response for POWER status command response NOT_IMPLEMENTED REJECTED IN TRANSITION STABLE Conditions and Contents of Operands Condition: OPR is different from the following value. operand[0]=7f 16 Do not use REJECTED response. Condition: The case where the power status of a device is in transition Value of each operands: The Monitor Subunit is transitioning into Power on state. operand[0]=70 16 (2) The Monitor Subunit is transitioning into Power off state. operand[0]=60 16 Condition: Except for the above Value of each operands: The power status of Monitor Subunit is ON operand[0]=70 16 (2) The power status of Monitor Subunit is OFF operand[0]=60 16 notify command [Option] The response for POWER notify command is shown in Table 7-3. Although POWER notify command is optional, if the target supports POWER notify command, it shall accept the notification request from at least three controllers (five or more is recommended). Page 18 Copyright 2004, 1394 Trade Association. All rights reserved.
19 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline 1.0 Table 7-3 Response for POWER notify command response NOT_IMPLEMENTED REJECTED INTERIM CHANGED after INTERIM REJECTED after INTERIM Conditions and Contents of Operands Condition: OPR is different from the following value. operand[0]=7f 16 Condition: The target already accepted the notification requests from maximum number of controllers. The target already has the pending request from the controller that issues the command. (A target does not accept the plural notification requests from the same controller.) Condition: Except for the above, always returns INTERIM Value of each operands: (1) The power status of Monitor Subunit is ON operand[0] = (2) The power status of Monitor Subunit is OFF. operand[0] = Condition: After the target returns INTERIM, when the power status of Unit has changed. Value of each operands: (1) The power status of Monitor Subunit is changed to ON. operand[0] = (2) The power status of Monitor Subunit is changed to OFF. operand[0] = Do not use REJECTED response after INTERIM response PLUG INFO Status Command Status command [Mandatory] The structure of PLUG INFO command is specified in Section 12.1 of AV/C General 4.1[R13]. In this guideline Monitor Subunit has one or more input plugs. The response for PLUG INFO status command is shown in Table 7-4. Copyright 2004, 1394 Trade Association. All rights reserved. Page 19
20 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, 2003 Table 7-4 Response for PLUG INFO status command response Conditions and Contents of Operands Condition: OPRs are different from the following values operand[0] = NOT_IMPLEMENTED operand[1] = FF 16 operand[2] = FF 16 operand[3] = FF 16 operand[4] = FF 16 REJECTED Do not use REJECTED response IN TRANSITION Do not use IN TRANSITION response Condition: Except for the above, always returns STABLE. Value of each operands: STABLE operand[0] = operand[1] = [01 16] (The number of destination plug) * 1 operand[2] = [00 16] (The number of source plug) * 2 operand[3] = FF 16 operand[4] = FF 16 * 1 operand[1] takes the value more than one. * 2 operand[2] takes any value. Page 20 Copyright 2004, 1394 Trade Association. All rights reserved.
21 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline Implementation of Bulletin Board Subunit When Bulletin Board Subunit (BB) is implemented, it shall be implemented to comply with Supplement to IEEE1394 Interface Implementation Guideline, Bulletin Board Subunit [R17]. Copyright 2004, 1394 Trade Association. All rights reserved. Page 21
22 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, Implementation of Unit 9.1 Internal Signal Connection This section describes the signal connection model inside the DTV. Figure 9-1 illustrates an example of the signal connection in the DTV. external antenna input plug (9E16 Recommended) Signal inputs from antenna for BS/CS digital broadcasting external antenna input plug (9C16 Recommended) Signal inputs from antenna for UV analog broadcasting antenna destination plug (00 16) antenna destination plug (00 16) Tuner Subunit (Satellite Digital) demux destination plug (01 16) Tuner Subunit (UV analog) *1 source plug (0016) SW1 SW2 SW3 Destination Plug(0016) Monitor Subunit serial bus output plug (0016) MPEG2-TS outputs to 1394 terminals external output plug(8016) Analog output to terminals(no.1) (NTSC Video format) external output plug(8116) Analog output to terminals(no.2) (NTSC Video format) external output plug(8216) Analog output to terminals(no.3) (NTSC Video format) serial bus input plug (0016) MPEG2-TS inputs from 1394 terminals external input plug(8016) Analog input from terminal(no.1) (NTSC Video external format) input plug(8116) Analog input from terminal(no.2) (NTSC Video external f ) input plug(8216) Analog input from terminal(no.3) (NTSC Video format) Figure 9-1 DTV internal signal connection model *1 The case where the implementation method of UV analog Tuner Subunit is 1 or 2 in chapter 6. The case where the implementation method is 3, it becomes a state which is same for input to be from the analog input terminal. The DTV has an external antenna input plug (antenna input for BS/CS digital broadcasting system), an external antenna input plug (antenna input for UV analog broadcasting system), a serial bus input plug, one or more external input plug as inputs of the device and a serial bus output plug and one or more external output plugs as outputs of the device. The number of external input/output plugs depends on a device, and this guideline does not specify it. Moreover, when a DTV physically has two or more analog output terminals, these terminals may be logically regarded and implemented as a single external output plug unless the signal source of these terminals can not be changed independently. As for analog input terminals, the number of physical terminals can be different from that of external input plug. Page 22 Copyright 2004, 1394 Trade Association. All rights reserved.
23 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline 1.0 The external input plug (antenna input for BS/CS digital broadcasting system) is a plug which inputs the signal received from the antenna to Unit, and is connected with the antenna destination plug of the Tuner Subunit for BS/CS digital broadcasting system. Antenna input for UV analog broadcasting system (external antenna input plug) is a plug which inputs the signal received from the antenna to Unit, and is connected with the antenna destination plug of the Tuner Subunit for UV analog broadcasting system. The serial bus input plug is a plug which receives the MPEG stream from 1394 bus to Unit. The function that makes partial stream from the received stream is optional, and this guideline does not define it. As for received stream from the 1394, this guideline defines the function that decodes the stream as is, and output the analog signal. DTV may have the digital/monitor-separate-operation-mode. In this operation mode, DTV executes two functionalities simultaneously. One is output the stream tuned by the Tuner Subunit to 1394 bus. Another is displaying the signal from other than Tuner Subunit for BS/CS digital broadcasting system (ex input signal or the signal from Tuner Subunit for UV analog) on Monitor Subunit. In this operation mode, SW1 in Figure 9-1 selects a source plug of tuner subunit, and SW3 selects the other signal source. Thus, SW2 is interlocked with one of SW1 and SW3 when SW1 and SW3 select different signal. It is vendor dependent which SW2 is interlocked with. If digital/monitor-separate-operation-mode is canceled, SW1,2 and 3 select the same signal source. This guideline does not specify which to select between SW1 and SW3 as the same input source. When DTV with digital/monitor-separate-operation-mode is not in the operation mode or a DTV does not have the operation mode, SW1, 2 and 3 are interlocked with one another and the signal source of serial bus output plug, external output plug and Monitor Subunit are always the same. The behavior of SW1, 2 and 3 is specified as follows, and the control of SW1, 2 and 3 by CONNECT control command is optional. Behavior of SW1: SW1 selects source plug of the Tuner Subunit for BS/CS digital broadcasting system while DTV receives the BS/CS digital broadcasting signal from the air. SW1 selects source plug of the Tuner Subunit for UV analog broadcasting system while DTV receives the UV analog broadcasting signal from the air. SW1 selects external input plug of the Unit while DTV receives the analog input signal. SW1 selects serial bus input plug of Unit while DTV decodes the stream from this serial bus input plug. While SW1 selects a plug other than the source plug of the Tuner Subunit for BS/CS digital broadcasting system, the serial bus output plug may not output the stream corresponding to signal source. If a DTV receives DSIT control command addressed to Tuner Subunit for BS/CS digital broadcasting system and accepts the command while SW1 selects a plug other than the source plug of the Tuner Subunit for BS/CS digital broadcasting system, the connection state of SW1 shall automatically be changed to select the source plug of the Tuner Subunit. Behavior of SW2: SW2 is interlocked with SW1 and 3 while the DTV is not in the digital/monitor-separateoperation-mode. This guideline does not specify with which SW2 is interlocked while the DTV is in the digital/monitor-separate-operation-mode. Behavior of SW3: SW3 is interlocked with SW1 and 2 while the DTV is not in the digital/monitor-separateoperation-mode. SW3 selects the different source from SW1 while the DTV is in the digital/monitor-separate-operation-mode. If a DTV receives DSIT control command addressed to Copyright 2004, 1394 Trade Association. All rights reserved. Page 23
24 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, 2003 Tuner Subunit for UV analog broadcasting system and accepts the command while SW3 selects a plug other than the source plug of the Tuner Subunit, the connection state of SW3 shall automatically be changed to select the source plug of the Tuner Subunit. The assignments of a plug number for each plug of Unit are shown in Table 9-1. Table 9-1 Assignment of a plug number Plug Plug number note serial bus external input input output output input input 9E 16 (recommend) 9C 16 (recommend) input input input output output output antenna input for BS/CS digital broadcasting system antenna input for UV analog broadcasting system analog input 1(NTSC or NTSC equivalent) analog input 2(NTSC or NTSC equivalent) analog input 3(NTSC or NTSC equivalent) analog output 1(NTSC or NTSC equivalent) analog output 2(NTSC or NTSC equivalent) analog output 3(NTSC or NTSC equivalent) The recommended value of the number of external antenna input plug is defined by ARIB 3.1[R10]. This guideline uses the value complying with ARIB 3.1[R10]. 9C16 is recommended as the value of antenna input plug for UV analog broadcasting system. Note: Some former models use 8016 for the value of antenna input plug of UV analog broadcasting system In this guideline, the external input/output plug numbers are assigned to ascending order from The Table 9-1 uses the number of external input/output plugs described in Figure 9-1 as an example. 9.2 AV/C Command This section describes the list of Unit commands supported by the DTV and implementation method of each command Support Levels of AV/C Commands Table 9-2 shows the support levels of Unit commands specified in this guideline and 1394TA Std. Page 24 Copyright 2004, 1394 Trade Association. All rights reserved.
25 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline 1.0 The shaded portion in the table means optional or recommended commands to which this guideline does not specify any rules. As for Specific inquiry commands and General inquiry commands, the target shall comply with the rule described in AV/C General 4.1[R13]. This guideline does not specify any additional rule for these commands. Table 9-2 Support Levels of Unit commands Unit command opcode Support Levels of this guideline Support Levels of 1394 TA Standard Control Status Notify C S N CHANNEL USAGE O O R R CONNECT O * O O O R CONNECT AV O O O O O O CONNECTIONS O O DIGITAL INPUT O O O O DIGITAL OUTPUT O O O O DISCONNECT O O DISCONNECT AV O O INPUT PLUG SIGNAL FORMAT O O O O R O OUTPUT PLUG SIGNAL FORMAT O O O O R O SUBUNIT INFO M M UNIT INFO M M POWER B2 16 M M O O O R RESERVE O O O O O R PLUG INFO M O M: Mandatory O: Optional R: Recommended : Not Defined or Not Supported *: The support level of the command depends on its operand Implementation of Supported Commands This section describes implementation method of AV/C command addressed to Unit and supported by the DTV. In the following description, OPR0, OPR1, OPR2, denote operand[0], operand[1], operand[2], CONNECT Command Status command [*] In this guideline, the CONNECT status commands which inquires source plug connected to 1) external output plug of Unit, 2) serial bus output plug of Unit, 3) Destination plug of Monitor Subunit, 4) antenna destination plug of Tuner Subunit for BS/CS digital, and 5) demux destination plug of Tuner Subunit are mandatory. Moreover, if Tuner Subunit for UV analog is implemented, the CONNECT status command which inquires source plug connected to antenna destination plug of Tuner Subunit for UV analog is mandatory. Copyright 2004, 1394 Trade Association. All rights reserved. Page 25
26 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, 2003 The structure of CONNECT command is specified in Section 12.3 of AV/C General 4.1[R13]. The response for CONNECT status command is shown in Table 9-3. Table 9-3 Response for CONNECT status command response Conditions and Contents of Operands Condition: If the combination of each OPRs are different from the following values, the target may return NOT_IMPLEMENTED response. <The inquiry of source plug by specifying destination plug> destination plug OPR0 OPR1 OPR2 OPR3 OPR4 external output plug #n *1 FF of Unit 16 FF 16 FE 16 FF 16 +n serial bus output FF plug#0 of Unit 16 FF 16 FE 16 FF , antenna destination FF plug of Tuner Subunit 16 FF 16 FE *3 NOT_IMPLEMENTED demux destination plug of Tuner Subunit destination plug of Monitor Subunit FF 16 FF 16 FE , * FF 16 FF 16 FE REJECTED IN TRANSITION STABLE *1 n: plug number (n = 0, 1, 2,..., N-1. N is the number of the implemented external output plugs. N is not necessarily the same as the number of physical analog output terminals (Refer to the section 9.1).) *2 Returns NOT_IMPLEMENTED when the value of operand is for Tuner Subunit for UV analog. *3 Returns NOT_IMPLEMENTED to when the implementation of Tuner Subunit is only for BS/CS digital. Do not use REJECTED response. Do not use IN TRANSITION response Condition: Except for the above, always returns STABLE. Value of each operands: The Response to the inquiry of source plug by specifying destination plug is shown in Table 9-3. Table 9-4shows the response value for CONNECT status command. Table 9-4 shows the case where BS/CS digital broadcasting Tuner Subunit=2816 and UV analog broadcasting Tuner Subunit=2916. So if the case where BS/CS digital broadcasting Tuner Subunit=2916 and UV analog broadcasting Tuner Subunit=2816, then 2816 and 2916 are replaced in the table. Page 26 Copyright 2004, 1394 Trade Association. All rights reserved.
27 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline 1.0 Table 9-4 Response Value of CONNECT status command (inquiry of source plug) destination_plug specified by command operand of response flame OPR0 OPR1 OPR2 OPR3 OPR4 responses not depending on the DTV status antenna destination plug of Tuner Subunit for BS/CS digital FD 16 FF 16 9E 16 * antenna destination plug of Tuner Subunit for UV analog *9 FD16 FF16 9C 16 * Copyright 2004, 1394 Trade Association. All rights reserved. Page 27
28 TV for Japanese BS/CS Guideline 1.0 TA Document , December 15, 2003 responses depending on the DTV status destination_plug specified by command operand of response flame OPR0 OPR1 OPR2 OPR3 OPR4 DTV receives the BS/CS digital broadcasting signal from the air. *1 (Not in the digital/monitorseparate-operationmode) DTV receives the BS/CS digital broadca sting signal from the air. *1 (in the digital/m onitorseparate - operatio n-mode) Monitor receives 1394 input stream *4 Monitor receives the UV analog broadca sting signal from the *4 *11 air Monitor receives the signal from analog input *4 DTV receives the stream from 1394 bus. (The demux function of Tuner Subunit is not used.) DTV receives the stream from 1394 bus. (The demux function of Tuner Subunit is used.) *4 DTV receives the UV analog external output plug #n *2 of UNIT serial bus output plug #0 of UNIT FC FF n FC FF destination plug of Monitor Subunit FC external output plug #n *2 of UNIT(Either of two kinds) FC FF 16 FC 16 FF FF n n serial bus output plug #0 of UNIT FC FF destination plug of Monitor Subunit FC 16 FF external output plug #n *2 of UNIT(Either of two kinds) FC FF 16 FC FF n n serial bus output plug #0 of UNIT FC FF destination plug of Monitor Subunit FC external output plug #n *2 of UNIT(Either of two kinds) serial bus output plug #0 of UNIT FC FF 16 FC 16 FF 16 +m *7 destination plug of Monitor Subunit FC 16 FF 16 external output plug # n *2 of UNIT serial bus output plug #0 of UNIT FF n n FC FF m *7 FC 16 FF FF n FC 16 FF FF destination plug of Monitor Subunit FC 16 FF demux destination plug of Tuner Subunit for BS/CS digital FF 16 FF 16 FE external output plug # n *2 *5 *5 * FF 16 of UNIT +n serial bus output plug #0 of UNIT *5 *5 *5 FF destination plug of Monitor Subunit demux destination plug of Tuner Subunit for BS/CS digital external output plug # n *2 of UNIT *5 *5 * FC 16 FF FC FF n broadcasting signal serial bus output plug #0 of UNIT FC FF Page 28 Copyright 2004, 1394 Trade Association. All rights reserved.
29 TA Document , December 15, 2003 TV for Japanese BS/CS Guideline 1.0 *6 *10 from the air. destination DTV receives the signal from analog input. *10 plug of Monitor FC Subunit external output plug # n * of UNIT FC 16 FF 16 +m FF 16 *7 +n serial bus output plug #0 of UNIT FC 16 FF 16 destination plug of Monitor Subunit FC 16 FF m * m *7 FF The shaded portion of the table is the same value as a AV/C Command Frame. *1 It is not dependent on whether the target outputs the stream to 1394 bus. *2 n: plug number (n = 0, 1, 2,, N-1. N is the number of the implemented external output plugs. N is not necessarily the same as the number of physical analog output terminals (Refer to section9.1).) *3 When the plug number of external antenna input plug for UV analog Tuner is other than 9C16, this value becomes another value. *4 This condition is applied only when the DTV has corresponding status. *5 This guideline does not define this value. *6 In case of implementation method 1 or 2 in chapter 6. In case of the implementation method 3, it becomes the same response which is shown in the column of DTV receives the signal from analog input. *7 m: plug number (m = 0, 1, 2,, M-1. M is the number of the implemented external input plugs. M is not necessarily the same as the number of physical analog input terminals (Refer to section9.1).) *8 When the plug number of external antenna input plug for BS/CS digital Tuner is other than 9E16, this value becomes another value. *9 In the case of implementation method 3 as described in Chapter 6, this response does not exist. (NOT IMPLEMENTED is returned in accordance with table 9-3) *10 When the device has digital/monitor-separate-operation-mode, there may be a case that this status does not exist. *11 In the case of the implementation method 1 or 2 of Chapter 6. In the implementation method 3, the response will be those that were shown in "digital/monitor-separate-operation-mode, and monitor receives the signal from analog input." CONNECTIONS Command Status command [Optional] The structure of CONNECTIONS command is specified in Section 12.5 of AV/C General 4.1[R13]. The response for CONNECTIONS status command is shown in Table 9-5. Copyright 2004, 1394 Trade Association. All rights reserved. Page 29
TA Document IEEE1394 Interface Implementation Guideline STB Device for Japanese Terrestrial Digital Broadcasting System 1.
TA Document 2003006 IEEE1394 Interface Implementation Guideline STB Device for Japanese Terrestrial Digital Broadcasting System 1.0 April 9, 2004 Sponsored by: 1394 Trade Association Accepted for Release
More informationTA Document IEEE1394 Interface Implementation Test Specification STB Device for Japanese BS/CS Digital Broadcasting System 1.
TA Document 2002016 IEEE1394 Interface Implementation Test Specification STB Device for Japanese Digital Broadcasting System 1.0 December 15, 2003 Sponsored by: 1394 Trade Association Accepted for Release
More informationTA Document Test specification of self-test for AV Devices 1.0 (Point-to-Point Test and Network Test)
TA Document 2003012 Test specification of self-test for AV Devices 1.0 (Point-to-Point Test and Network Test) February 4, 2003 Sponsored by: 1394 Trade Association Accepted for Release by: 1394 Trade Association
More informationTA Document IEEE1394 Interface Implementation Test Specification DV Device 1.0
TA Document 2002014 IEEE1394 Interface Specification DV Device 1.0 December 15, 2003 Sponsored by: 1394 Trade Association Accepted for Release by: 1394 Trade Association Board of Directors. Abstract: Keywords:
More informationTA Document Specification of high-speed transmission of
TA Document 2002008 Specification of high-speed transmission of DV March 20, 2003 Sponsored by: 1394 Trade Association Accepted for Release by: 1394 Trade Association Board of Directors. Abstract: This
More informationSpecification for TRAN Layer Services
Specification for TRAN Layer Services Version 1.0 November 3, 1995 Sponsored by: Architecture Working Group of the 1394 Trade Association Approved for Release by: 1394 Trade Association Steering Committee
More informationTA Document IEEE1394 Interface Implementation Guideline DV Device 1.0
TA Document 2002012 IEEE1394 Interface Implementation Guideline DV Device 1.0 December 15, 2003 Sponsored by: 1394 Trade Association Accepted for Release by: 1394 Trade Association Board of Directors.
More informationTA Document IEEE1394 Interface Implementation Guideline D-VHS Device 1.0
TA Document 2002019 IEEE1394 Interface Implementation Guideline D-VHS Device 1.0 December 15, 2003 Sponsored by: 1394 Trade Association Accepted for Release by: 1394 Trade Association Board of Directors.
More informationTA Document AV/C Disc Subunit - DVR-Blue Media Type Specification 1.0
TA Document 2001013 AV/C Disc Subunit - DVR-Blue Media Type Specification 1.0 December 11, 2001 Sponsored by 1394 Trade Association Accepted for Release by 1394 Trade Association Board of Directors. Abstract
More informationTA Document SMPTE Time Code and Sample Count Transmission Protocol Ver.1.0
TA Document 1999024 SMPTE Time Code and Sample Count Transmission Protocol Ver.1.0 October 24, 2000 Sponsored by: 1394 Trade Association Accepted for Release by: 1394 Trade Association Board of Directors.
More informationTA Document Editorial Corrections to the Asynchronous Serial Bus Connections, Version 1.0
TA Document 1999010 Editorial Corrections to the Asynchronous Serial Bus Connections, Version 1.0 January 3, 1999 Sponsored by: 1394 Trade Association Accepted for Release by: 1394 Trade Association Board
More informationTA Document AV/C Disc Media Type Specification - SACD 1.2
TA Document 2001016 AV/C Disc Media Type Specification - SACD 1.2 December 11, 2001 Sponsored by 1394 Trade Association Accepted for Release by 1394 Trade Association Board of Directors. Abstract This
More informationAV/C Disc Media Type Specification CD-DA
TA Document 1999002 AV/C Disc Media Type Specification CD-DA Version 1.0 April 9, 1999 Sponsored by Audio/Video Working Group of the 1394 Trade Association Approved for Release by This document has been
More informationAV/C Disc Media Type Specification MD audio
TA Document 1998014 AV/C Disc Media Type Specification MD audio Version 1.0 January 26, 1999 Sponsored by Audio/Video Working Group of the 1394 Trade Association Approved for Release by This document has
More informationTA Document AV/C Bulletin Board Subunit General Specification Version 1.0
TA Document 1999005 AV/C Bulletin Board Subunit General Specification Version 10 August 4, 1999 Sponsored by 1394 Trade Association Approved for Release by This document has been approved for release by
More informationTA Document Transmission of Rec. ITU-R BO.1294 System B Transport 1.0
TA Document 1998017 Transmission of Rec. ITU-R BO.1294 System B Transport 1.0 August 18, 2000 Sponsored by: 1394 Trade Association Accepted for Release by: 1394 Trade Association Board of Directors. Abstract:
More informationDocument number Finger Print Scanner Functional Test Specification. August 9, Sponsored by: 1394 Trade Association
Document number 2012001 Finger Print Scanner Functional Test Specification August 9, 2012 Sponsored by: 1394 Trade Association Accepted for publication by This draft specification been accepted by the
More informationTA Document AV/C Camera Storage Subunit 2.1
TA Document 2003005 AV/C Camera Storage Subunit 2.1 February 4, 2004 Sponsored by 1394 Trade Association Accepted 1394 Trade Association Board of Directors. Abstract This specification defines a model
More informationTA Document AV/C Descriptor Mechanism Specification 1.1
TA Document 2001021 AV/C Descriptor Mechanism Specification 1.1 February 20, 2002 Sponsored by 1394 Trade Association Accepted for Release by 1394 Trade Association Board of Directors Abstract This specification
More informationTA Document AV/C Bulletin Board Type Specification Resource Schedule Board 1.0a
TA Document 1999006 AV/C Bulletin Board Type Specification Resource Schedule Board 1.0a September 24, 1999 Sponsored by: 1394 Trade Association Approved for Release by: This document has been approved
More informationAV/C Digital Interface Command Set General Specification
TA Document 1998003 AV/C Digital Interface Command Set General Specification Version 3.0 April 15, 1998 Sponsored by Audio/Video Working Group of the 1394 Trade Association Approved for Release by This
More informationAV/C Disc Subunit General Specification
TA Document 1998013 AV/C Disc Subunit General Specification Version 1.0 January 26, 1999 Sponsored by Audio/Video Working Group of the 1394 Trade Association Approved for Release by This document has been
More informationOPEN BASE STATION ARCHITECTURE INITIATIVE
OPEN BASE STATION ARCHITECTURE INITIATIVE Conformance Test Cases Appendix E BBM Version.00 Issue.00 () FOREWORD OBSAI description and specification documents are developed within the Technical Working
More informationAV/C commands for management of Asynchronous Serial Bus Connections
TA Document 1998011 AV/C commands for management of Asynchronous Serial Bus Connections Version 1.0 January 26, 1999 Sponsered by: Audio/Video Working Group of the 1394 Trade Association Approved for Release
More informationRecommendations for LXI systems containing devices supporting different versions of IEEE 1588
Recommendations for LXI systems containing devices supporting different versions of IEEE 1588 Revision 1.0 December 15, 2008 Edition Page 1 of 9 Notice of Rights All rights reserved. This document is the
More informationRP3 / RP3-01 Interface Profile Document
RP / RP-0 Interface Profile Document v..0 RP / RP-0 Interface Profile Document Version.0 Issue.0 Copyright 009, OBSAI. All Rights Reserved. () RP / RP-0 Interface Profile Document v..0 Table of Contents
More informationSDLC INTELLECTUAL PROPERTY POLICY
SDLC INTELLECTUAL PROPERTY POLICY Last Revised: 11/14/17 1. Introduction. This Intellectual Property Policy ( Policy ) governs intellectual property rights of the SDL Consortium ( SDLC ) and its Members
More informationANSI/SCTE
Digital Video Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 243-3 2017 Next Generation Audio Carriage Constraints for Cable Systems: Part 3 MPEG-H Audio Carriage Constraints NOTICE The Society of Cable
More informationOPEN BASE STATION ARCHITECTURE INITIATIVE
OPEN BASE STATION ARCHITECTURE INITIATIVE Conformance Test Cases Appendix C RP interface and TM module Version.00 Issue.00 (4) FOREWORD OBSAI description and specification documents are developed within
More informationENGINEERING COMMITTEE Digital Video Subcommittee SCTE Home Digital Network Interface Specification with Copy Protection
ENGINEERING COMMITTEE Digital Video Subcommittee SCTE 26 2010 Home Digital Network Interface Specification with Copy Protection NOTICE The Society of Cable Telecommunications Engineers (SCTE) Standards
More informationANSI/SCTE
ENGINEERING COMMITTEE Digital Video Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 87-2 202 Stereoscopic 3D PSI Signaling NOTICE The Society of Cable Telecommunications Engineers (SCTE) Standards and
More informationANSI/CEA Standard. Tunneling Device Area Network Protocols over Internet Protocol Channels ANSI/CEA-852-C
ANSI/CEA Standard Tunneling Device Area Network Protocols over Internet Protocol Channels ANSI/CEA-852-C April 2014 NOTICE Consumer Electronics Association (CEA ) Standards, Bulletins and other technical
More informationGetting Started with MTConnect: Architecture
Institute Getting Started with : Architecture Draft 1 9/25/2012 Specifications or Materials AMT - The Association For Manufacturing Technology ( AMT ) owns the copyright in this Specification or Material.
More informationOPEN BASE STATION ARCHITECTURE INITIATIVE
OPEN BASE STATION ARCHITECTURE INITIATIVE Conformance Test Specification Appendix H UDPCP Test Cases Version.00 Issue.00 (38) FOREWORD OBSAI description and specification documents are developed within
More informationITU-T J.288. Encapsulation of type length value (TLV) packet for cable transmission systems
I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T J.288 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (03/2016) SERIES J: CABLE NETWORKS AND TRANSMISSION OF TELEVISION, SOUND
More informationCEA Standard. Control Networking Protocol Specification Part 5: Implementation- Application-Layer-Guidelines CEA-709.5
CEA Standard Control Networking Protocol Specification Part 5: Implementation- Application-Layer-Guidelines June 2015 NOTICE Consumer Electronics Association (CEA ) Standards, Bulletins and other technical
More informationTA Document AV/C Printer Subunit Specification 2.0
TA Document 2003004 AV/C Printer Subunit Specification 2.0 February 4, 2004 Sponsored by 1394 Trade Association Accepted 1394 Trade Association Board of Directors. Abstract This document defines the AV/C
More informationInterpretations and Clarifications
Interpretations and Clarifications 25 th June 2014 INTERPRETATIONS AND CLARIFICATIONS... 1 REVISION HISTORY... 5 1 INTERPRETATIONS AND CLARIFICATIONS... 6 1.1 OVERVIEW... 6 1.2 CLARIFICATION: RULE 8.7
More informationARM CoreLink DPE-400 Data Parity Extension for NIC-400
ARM CoreLink DPE-400 Data Parity Extension for NIC-400 Revision: r1p0 Technical Reference Manual Copyright 2014, 2016 ARM. All rights reserved. ARM 100591_0100_00_en ARM CoreLink DPE-400 Data Parity Extension
More informationNEXT DST CHANGE SERVICE
BLUETOOTH DOC Date / Year-Month-Day Approved Revision Document No 2011-09-15 Adopted V10r00 NDCS_SPEC Prepared By E-mail Address N.B. PUID WG rd-feedback@bluetooth.org NEXT DST CHANGE SERVICE Abstract:
More informationIETF TRUST. Legal Provisions Relating to IETF Documents. Approved November 6, Effective Date: November 10, 2008
IETF TRUST Legal Provisions Relating to IETF Documents Approved November 6, 2008 Effective Date: November 10, 2008 1. Background The IETF Trust was formed on December 15, 2005, for, among other things,
More informationTCG. TCG Certification Program. TNC Certification Program Suite. Document Version 1.1 Revision 1 26 September 2011
TCG Certification Program TNC Certification Program Suite Document Version 1.1 Revision 1 26 September 2011 Contact: admin@trustedcomputinggroup.org TCG TCG PUBLISHED Copyright TCG 2009-2011 Copyright
More information96Boards TV Platform Version 1.0, August 2016
96Boards TV Platform Version 1.0, August 2016 Page 1 of 10 IMPORTANT INFORMATION Copyright 2016 Linaro Ltd. All rights reserved. This document is copyrighted by Linaro Ltd. Permission is granted to reproduce
More informationThis is a preview - click here to buy the full publication
CONSOLIDATED VERSION IEC 61937-11 Edition 1.1 2018-11 colour inside Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS
More informationFOR TCG ACPI Specification
ERRATA Errata Version 0.3 August 25, 2017 FOR TCG ACPI Specification Specification Version 1.20 Revision 8 January 19th, 2017 Contact: admin@trustedcomputinggroup.org Copyright TCG 2017 Disclaimers, Notices,
More informationINTERNATIONAL STANDARD
ISO/IEC 29341-14-3 INTERNATIONAL STANDARD Edition 1.0 2011-08 colour inside Information technology UPnP device architecture Part 14-3: Audio Video Device Control Protocol Level 3 Media Server Device INTERNATIONAL
More informationTerminal I/O Profile Client Implementation Guide
[04.2016] Terminal I/O Profile Client Implementation Guide 30507ST10753A Rev. 6 2017-08-16 Mod. 0809 2016-08 Rev.7 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE NOTICE While reasonable efforts have
More informationENGINEERING COMMITTEE Digital Video Subcommittee
ENGINEERING COMMITTEE Digital Video Subcommittee SCTE 164 2010 Emergency Alert Metadata Descriptor NOTICE The Society of Cable Telecommunications Engineers (SCTE) Standards are intended to serve the public
More informationJEDEC SOLID STATE TECHNOLOGY ASSOCIATION
JEDEC STANDARD Serial Flash Discoverable Parameters (SFDP), for Serial NOR Flash JESD216 APRIL 2011 JEDEC SOLID STATE TECHNOLOGY ASSOCIATION NOTICE JEDEC standards and publications contain material that
More informationISO/IEC/ IEEE INTERNATIONAL STANDARD. Systems and software engineering Requirements for acquirers and suppliers of user documentation
INTERNATIONAL STANDARD ISO/IEC/ IEEE 26512 First edition 2011-06-01 Systems and software engineering Requirements for acquirers and suppliers of user documentation Ingénierie du logiciel et des systèmes
More information-2 PXI Software Specification
-2 PXI Software Specification PCI extensions for Instrumentation An Implementation of PXI Software Specification Revision 2.5 5/31/18 Revision 2.5 May 31, 2018 IMPORTANT INFORMATION Copyright Copyright
More informationUSB Personal Video Recorder. USB Hybrid TV Tuner. (USB2.0 / 1.1 PNP TV Capture Box) UAD-880 User s Guide
USB Personal Video Recorder USB Hybrid TV Tuner (USB2.0 / 1.1 PNP TV Capture Box) UAD-880 User s Guide User s Notice No part of this manual, including the products and software described in it, may be
More informationFIPA ACL Message Structure Specification
1 2 3 4 5 FOUNDATION FOR INTELLIGENT PHYSICAL AGENTS FIPA ACL Message Structure Specification 6 7 Document title FIPA ACL Message Structure Specification Document number XC00061E Document source FIPA TC
More informationAES standard for digital audio - Audio applications of networks - Application of IEC bit generic data. Preview only
(reaffirmed 2013) AES standard for digital audio - Audio applications of networks - Application of IEC 61883-6 32-bit generic data Published by Audio Engineering Society, Inc. Copyright 2008 by the Audio
More informationRUNNING SPEED AND CADENCE SERVICE
Date / Year-Month-Day Approved Revision Document No BLUETOOTH DOC 2012-08-07 Adopted V10 RSCS_SPEC Prepared By E-mail Address N.B. Sports and Fitness WG sf-main@bluetooth.org RUNNING SPEED AND CADENCE
More informationINTERNATIONAL STANDARD
IEC 61883-1 INTERNATIONAL STANDARD Edition 3.0 2008-02 Consumer audio/video equipment Digital interface Part 1: General IEC 61883-1:2008(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva,
More informationNOTICE. (Formulated under the cognizance of the CTA R4.8 DTV Interface Subcommittee.)
ANSI/CTA Standard SD Card Common Interface Standard ANSI/CTA-2040 (Formerly ANSI/CEA-2040) July 2011 NOTICE Consumer Technology Association (CTA) Standards, Bulletins and other technical publications are
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62243 First edition 2005-07 IEEE 1232 Artificial intelligence exchange and service tie to all test environments (AI-ESTATE) IEEE 2005 Copyright - all rights reserved IEEE is
More informationEnterprise and Datacenter. SSD Form Factor. 1U Long Specification
Enterprise and Datacenter SSD Form Factor 1U Long Specification Revision 0.9 Draft November 9, 2017 Enterprise and Datacenter SSD Form Factor Working Group Please send comments to Anthony Constantine anthony.m.constantine@intel.com
More informationGuidelines Concerning the Transmission, Etc. of Specified Electronic Mail
Guidelines Concerning the Transmission, Etc. of Specified Electronic Mail August 2011 Ministry of Internal Affairs and Communications Telecommunications Bureau Telecommunications Consumer Policy Division
More informationTerms Of Use AGREEMENT BETWEEN USER AND DRAKE MODIFICATION OF THESE TERMS OF USE LINKS TO THIRD PARTY WEB SITES USE OF COOKIES
Terms Of Use AGREEMENT BETWEEN USER AND DRAKE This website and other related websites and mobile applications (collectively referred to as "Sites") comprise various web pages and services operated by Drake
More informationSystems and software engineering Vocabulary
This is a preview - click here to buy the full publication INTERNATIONAL STANDARD ISO/IEC/ IEEE 24765 Second edition 2017-09 Systems and software engineering Vocabulary Ingénierie des systèmes et du logiciel
More informationINTERNATIONAL TELECOMMUNICATION UNION
INTERNATIONAL TELECOMMUNICATION UNION ITU-T E.212 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (05/2004) SERIES E: OVERALL NETWORK OPERATION, TELEPHONE SERVICE, SERVICE OPERATION AND HUMAN FACTORS International
More informationIntroduction to the American Academy of Forensic Sciences Standards Board
Introduction to the American Academy of Forensic Sciences Standards Board Introduction Teresa Ambrosius, Secretariat Mary McKiel, Communication Liaison Technical Coordinator Position to be filled Background
More informationTA Document AV/C Compatible Asynchronous Serial Bus Connections 2.1
TA Document 2001009 AV/C Compatible Asynchronous Serial Bus Connections 2.1 July 23, 2001 Sponsored by: 1394 Trade Association Accepted for Release by: 1394 Trade Association Board of Directors. Abstract:
More informationTECH 3381 CARRIAGE OF EBU-TT-D IN ISOBMFF VERSION: 1.0 SOURCE: SP/MIM XML SUBTITLES
TECH 3381 CARRIAGE OF EBU-TT-D IN ISOBMFF VERSION: 1.0 SOURCE: SP/MIM XML SUBTITLES Geneva October 2014 Tech 3381 Conformance Notation This document contains both normative text and informative text.
More informationTERMS OF USE. 1.3 This Site is intended for personal use only. Any commercial use without the prior written consent of Eretz Hemdah is prohibited.
TERMS OF USE 1. General 1.1 The Eretz Hemdah organization and the Eretz Hemdah higher education institute for Jewish studies in Jerusalem and/or any of its representatives ( Eretz Hemdah or the Operator
More informationISO/IEC This is a preview - click here to buy the full publication INTERNATIONAL STANDARD. First edition
INTERNATIONAL STANDARD ISO/IEC 25062 First edition 2006-04-01 Corrected version 2006-10-01 Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Common Industry Format (CIF)
More informationRapidIO Interconnect Specification Part 3: Common Transport Specification
RapidIO Interconnect Specification Part 3: Common Transport Specification Rev. 1.3, 06/2005 Copyright RapidIO Trade Association RapidIO Trade Association Revision History Revision Description Date 1.1
More informationQPP Proprietary Profile Guide
Rev. 04 April 2018 Application note Document information Info Content Keywords Proprietary Profile, Server, Client Abstract The Proprietary Profile is used to transfer the raw data between BLE devices.
More informationECMA-405. Data Interchange on Parallel Write/Read Disk Format for 5 Optical Disks. 1 st Edition / December Reference number ECMA-123:2009
ECMA-405 1 st Edition / December 2013 Data Interchange on Parallel Write/Read Disk Format for 5 Optical Disks Reference number ECMA-123:2009 Ecma International 2009 COPYRIGHT PROTECTED DOCUMENT Ecma International
More informationISO/IEC/ IEEE
INTERNATIONAL STANDARD ISO/IEC/ IEEE 31320-1 First edition 2012-09-15 Information technology Modeling Languages Part 1: Syntax and Semantics for IDEF0 Technologies de l'information Langages de modélisation
More informationHardware Specification Revision 2.2 ECN 1. Revision 1.0 June 13, 2005
-1 Hardware Specification Revision 2.2 ECN 1 Revision 1.0 June 13, 2005 IMPORTANT INFORMATION Copyright Copyright 1997-2005 PXI Systems Alliance. All rights reserved. This document is copyrighted by the
More informationANSI/SCTE
ENGINEERING COMMITTEE Digital Video Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 194-2 2013 DTS-HD AUDIO SYSTEM Part 2: Constraints for Carriage over MPEG-2 Transport NOTICE The Society of Cable Telecommunications
More informationIETF TRUST. Legal Provisions Relating to IETF Documents. February 12, Effective Date: February 15, 2009
IETF TRUST Legal Provisions Relating to IETF Documents February 12, 2009 Effective Date: February 15, 2009 1. Background The IETF Trust was formed on December 15, 2005, for, among other things, the purpose
More informationOne Identity Password Manager User Guide
One Identity Password Manager 5.8.2 User Guide Copyright 2018 One Identity LLC. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright. The software described in this guide
More informationAll other forms of social media are prohibited unless reviewed and approved prior to use by designated SFA Compliance Principal.
VI.1.5. Social Media Social media is a form of electronic communication that allows individuals to create, share or exchange information and ideas with others in virtual communities and networks. When
More informationS1R72U01 Technical Manual
S1R72U01 Technical Manual Rev. 1.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right
More information-2 PXI Software Specification
-2 PXI Software Specification PCI extensions for Instrumentation An Implementation of PXI Software Specification Revision 2.4 10/18/12 Revision 2.4 October 18, 2012 IMPORTANT INFORMATION Copyright Copyright
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Multimedia application format (MPEG-A) Part 4: Musical slide show application format
INTERNATIONAL STANDARD ISO/IEC 23000-4 Second edition 2009-01-15 Information technology Multimedia application format (MPEG-A) Part 4: Musical slide show application format Technologies de l'information
More informationUSB Feature Specification: Shared Endpoints
USB Feature Specification: Shared Endpoints SYSTEMSOFT CORPORATION INTEL CORPORATION Revision 1.0 October 27, 1999 USB Feature Specification: Shared Endpoints Revision 1.0 Revision History Revision Issue
More informationOne Identity Starling Identity Analytics & Risk Intelligence. User Guide
One Identity Starling Identity Analytics & Risk Intelligence User Guide Copyright 2019 One Identity LLC. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright. The software
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 14543-3-7 First edition 2007-01 Information technology Home electronic system (HES) architecture Part 3-7: Media and media dependent layers Radio frequency for network based
More informationCERTIFIED MAIL LABELS TERMS OF USE and PRIVACY POLICY Agreement
CERTIFIED MAIL LABELS TERMS OF USE and PRIVACY POLICY Agreement Welcome to Certified Mail Envelopes and Certified Mail Labels web sites (the Site ) a website, trademark and business name owned and operated
More informationALG Associates, LLC ( ALG Associates ) operates a website under. and has created this privacy policy to demonstrate its
PRIVACY STATEMENT ALG Associates, LLC ( ALG Associates ) operates a website under www.warrantyconference.com and has created this privacy policy to demonstrate its commitment to the privacy of the users
More informationTCG Storage Work Group. Storage Certification Program. Program Version 1.0 Document Revision 1.22 March 16, Contact: Doug Gemmill, TCG CPM T C G
TCG Storage Work Group Storage Certification Program Program Version 1.0 Document Revision 1.22 March 16, 2018 Contact: Doug Gemmill, TCG CPM T C G TCG Published Copyright TCG 2018 Copyright 2018 Trusted
More informationUser Guide for Avaya Equinox Add-in for IBM Lotus Notes
User Guide for Avaya Equinox Add-in for IBM Lotus Notes Release 9.0 Issue 1 January 2017 2014-2017, Avaya, Inc. All Rights Reserved. Notice While reasonable efforts have been made to ensure that the information
More informationAdministrative Guideline. SMPTE Metadata Registers Maintenance and Publication SMPTE AG 18:2017. Table of Contents
SMPTE AG 18:2017 Administrative Guideline SMPTE Metadata Registers Maintenance and Publication Page 1 of 20 pages Table of Contents 1 Scope 3 2 Conformance Notation 3 3 Normative References 3 4 Definitions
More informationWiMAX Forum Trademark Policy and Trademark Usage Guidelines Part 1 WiMAX. Adopted March 27, 2007; Amended September 6, 2007
Introduction. WiMAX Forum Adopted March 27, 2007; Amended September 6, 2007 This policy provides usage guidelines and requirements for WiMAX. WiMAX is a trademark and service mark of the WiMAX Forum. As
More informationISO/IEC 8348 INTERNATIONAL STANDARD. Information technology Open Systems Interconnection Network service definition
INTERNATIONAL STANDARD ISO/IEC 8348 Third edition 2002-11-01 Information technology Open Systems Interconnection Network service definition Technologies de l'information Interconnexion des systèmes ouverts
More informationISO/IEC INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 15408-1 Third edition 2009-12-15 Information technology Security techniques Evaluation criteria for IT security Part 1: Introduction and general model Technologies de l'information
More informationOpenFlow Trademark Policy
Introduction OpenFlow Trademark Policy This document outlines the Open Networking Foundation s ( ONF ) policy for the trademarks and graphic logos that we use to identify the OpenFlow specification and
More informationIEEE DMLT Study Group Straw-man DRAFT PAR and 5C
IEEE 802.3 DMLT Study Group Straw-man DRAFT PAR and 5C This version has no status in SG Edited by Yong Kim @ Broadcom Page 1 2.1 Project Title IEEE Standard for Ethernet Amendment Specification and Management
More informationISO 3901 INTERNATIONAL STANDARD. Information and documentation International Standard Recording Code (ISRC)
INTERNATIONAL STANDARD ISO 3901 Second edition 2001-10-01 Information and documentation International Standard Recording Code (ISRC) Information et documentation Code international normalisé des enregistrements
More informationDTCP Volume 1 Supplement G Mapping DTCP to WirelessHD (Informational Version)
DTCP Volume 1 Supplement G Mapping DTCP to WirelessHD (Informational Version) Hitachi, Ltd. Intel Corporation Matsushita Electric Industrial Co., Ltd. Sony Corporation Toshiba Corporation Revision 1.0
More informationINCLUDING MEDICAL ADVICE DISCLAIMER
Jordan s Guardian Angels Terms and Conditions of Use INCLUDING MEDICAL ADVICE DISCLAIMER Your use of this website and its content constitutes your agreement to be bound by these terms and conditions of
More informationCNH Industrial Privacy Policy. This Privacy Policy relates to our use of any personal information you provide to us.
CNH Industrial Privacy Policy General Terms The CNH Industrial Group appreciates your interest in its products and your visit to this website. The protection of your privacy in the processing of your personal
More informationEnterprise and Datacenter. SSD Form Factor. 1U Short Specification
Enterprise and Datacenter SSD Form Factor 1U Short Specification Revision 0.9 Draft October 27, 2017 Enterprise and Datacenter SSD Form Factor Working Group Please send comments to Anthony Constantine
More informationThe Travel Tree Terms and Conditions
The Travel Tree Terms and Conditions Please read the following Terms & Conditions carefully before using this site. Use of this site indicates acceptance of these Terms and Conditions. The following terms
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60488-2 First edition 2004-05 IEEE 488.2 Standard digital interface for programmable instrumentation Part 2: Codes, formats, protocols and common commands IEEE 2004 Copyright
More information