HUEDA 5CH RDM DMX512 Decoder

Transcription

1 HUEDA 5CH RDM DMX5 Decoder Model : H-DMX08A-5M- ledworldlighting.com ledworld.ca Before you begin, read all warnings and installation instructions and save for future use. XR DMX In/Out Rj5 DMX In/Out RB ED Out Screw DMX In/Out Class DC Power Input Safety & Warnings This product is intended to be installed and serviced by a quali ed licensed electrician. Install in accordance with the ational Electric Code, and local regulations. Disconnect power before installing or servicing. Only power with a regulated (listed) constant voltage Class power supply (-V DC). ever use this product with dimmable or magnetic dimmable power source(driver). Ensure applicable wire is installed between driver, xture, and any controls in between. When choosing wire, factor in voltage drop, amperage rating and type (in-wall rated, wet location rated, etc.). Inadequate wire installation could overheat wires and cause re. This product is rated for indoor installation and only for dry locations. Avoid direct sun light. Do not modify this product beyond the instructions in this guide or the warranty will be voided. Wiring diagrams in this installation guide for basic installations. Please carefully review your installation before proceeding.. Product Features: Ÿ DMX 5 RDM decoder, RDM function can inter-communicate between DMX master and decoder. e.g. you can set DMX decoder s address by DMX master console. Ÿ Metal housing, digital display for address data, easily to set and show DMX address Ÿ Multiple DMX in/out ports: RJ 5, XR, normal screws Ÿ Total 5 PWM output channels, common anode. Adjustable quantity from CH~5CH Ÿ Adjustable PWM output resolution ratio 8bit, 6bit. Ÿ Adjustable output PWM frequency from 500HZ ~ 9K HZ Ÿ Adjustable output curve gamma value from 0. ~ 9.9 Ÿ Adjustable decoding mode. Product Parameter: Part o. Input Voltage Output Current Output Power H-DMX08A-5M- DC V~DC V (Use only with Class regulated Power supply) 5 x 8A 5 x (96~88)W ED World Inc. # ST SE CAARY, AB TC B7 CAADA Version. 0/8/6 /6 Copyright 06 ED WORD IC. All Rights Reserved. We are not responsible for errors or omissions. Product and speci cations subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

2 H-DMX08A-5M- DMX5 Decoder. Product Dimension: 7mm (.87 ) 8mm (.9 ) 6mm (6.5 ). Operation:. DMX address setting: Back Enter Up Down Select menu XXX click button Enter and hold, display ashes, then click or hold button Up/Down to set DMX address (click to slow, hold is fast), then click button Back to con rm.. quantity setting: Select menu XX click button Enter, display ashes, then click button Up/Down to set quantity, then click button Back to con rm. e.g. The DMX address is already set 00 Ch0 = DMX address for all the output channels, which are all address 00 Ch0 = DMX addresses, output & is address 00, output, & 5 is address 00 Ch0 = DMX addresses, output, is address 00, 00 output, & 5 is address 00 Ch0 = DMX addresses, output,, is address 00, 00, 00 output & 5 is address 00 Ch05 = 5 DMX addresses, output,,,, 5 is address 00, 00, 00, 00, 005. PWM output resolution Bit setting: Select menu XX click button Enter, display ashes, then click button Up/Down to choose 08 or 6 bit, then click button Back for con rm. Button Introduction Up, Down button is for menu selection. After power on the decoder, if keep on clicking Up button you will nd below menu on display. XXX Means DMX address. factory defaults setting is 00. XX Means s quantity. factory defaults setting is Ch05 XX Means Bit (8bit or 6bit). factory defaults setting is 6bit XX Means output PWM frequency. factory defaults setting is K HZ XX Means output PWM frequency. factory defaults setting is K HZ XX Means Decoding mode, factory defaults setting is dp. By holding button Back + Enter together at the same time over 5 seconds until the display go off, it will restore default settings. /6 ED World Inc. # ST SE CAARY, AB TC B7 CAADA Version. 0/8/6 Copyright 06 ED WORD IC. All Rights Reserved. We are not responsible for errors or omissions. Product and speci cations subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

3 Input Output H-DMX08A-5M- DMX5 Decoder Warning: Input voltage must be identical to output voltage of the ED Fixture! WIRE 6-8 MM ( ") Exposed wire should not be more than 6-8 mm long & solder tip (tinned). Do not allow Wires to cross and insure all exposed wire is fully inserted into the screw terminals. Hand tighten screw terminals. Use to AW gauge wire terminals. Ÿ Input Voltage must be identical to output voltage of the ED Ÿ Input: For low voltage power input (DC ~ VDC). and. Use only to gauge wire for input terminals. 5. Wiring Diagram: Power In DMX Data Out VDC VDC _ + Vin DMX Master Controller Warning wrong correct Class ow Voltage Max 500mA Orange White/Orange Brown CAT5 ( Rated For Inside Wall use) Vin DMX Data Output Make sure that wires cannot cross RJ5 Splice Cable Wiring Connections White/Orange Data + Orange Data - Brown round class power input White/Blue White/reen Make sure that wires are screwed tight and fully inserted VDC + (Vin) VDC - () DMX Data Out White/Orange Orange White/Orange Orange Class ow Voltage (~VDC) Class ow Voltage (~VDC) Class ow Voltage (~VDC) DMX Data In Brown Zone DMX Channel Zone DMX Channel 5 Zone DMX Channel 9 Back Enter Up Down Back Enter Up Down Back Enter Up Down Female Pin: Pin: Pin: DMX OUPUT Male Pin: Pin: Pin: RJ5 Pin:Data+ Pin:Data- Pin7: Pin8: Female Pin: Pin: Pin: DMX OUPUT Male Pin: Pin: Pin: RJ5 Pin:Data+ Pin:Data- Pin7: Pin8: Female Pin: Pin: Pin: DMX OUPUT Male Pin: Pin: Pin: /R- /- /B- /W- 5/W- /R- /- /B- /W- 5/W- RJ5 Pin:Data+ Pin:Data- Pin7: Pin8: /R- /- /B- /W- 5/W- DMX Out Wireless DMX Out DMX In Wireless DMX In R B R B Power Input ~VDC RB Strip ight / Fixture RB Strip ight / Fixture RB Strip ight / Fixture Channel Color Channel - Red Channel - reen Channel - Blue Channel - White RB ED Output Single Color ED Output + /R- /- /B- /W- 5/W- R B /6 ED World Inc. # ST SE CAARY, AB TC B7 CAADA Version. 0/8/6 Copyright 06 ED WORD IC. All Rights Reserved. We are not responsible for errors or omissions. Product and speci cations subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

4 H-DMX08A-5M- DMX5 Decoder 6. Compatible Master Color Controllers and Controllers/Receivers Master Color Controller HUEDA (W-8DMX) HUEDA Hub (H-88WI) RBW Handheld Remote (H-89S) Controllers/Receivers IOS app available IOS app available RF RBW Receiver (H-R009PD) *Requires HUEDA Hub (H-88WI) to use mobile app RF RBW Receiver (Outdoor) (H-R009FA(W)) *Requires HUEDA Hub (H-88WI) to use mobile app 5CH DMX Decoder (H-DMX08A-5M-) Easy DMX5 Decoder (H-0B(W)) 7. Output PWM frequency setting: Select menu XX click button Enter, display ashes, then click button Up/Down to choose 00~09, then click button Back to con rm, 00=500Hz, 0=kHz, 0=kHz...09=9kHz 8. Output curve gamma value setting: Select menu XXclick button Enter, display ashes, then click or hold button Up/Down to choose 0.~9.9, then click button Back to con rm gamma value Output brightness level < > DMX value level /6 ED World Inc. # ST SE CAARY, AB TC B7 CAADA Version. 0/8/6 Copyright 06 ED WORD IC. All Rights Reserved. We are not responsible for errors or omissions. Product and speci cations subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

5 H-DMX08A-5M- DMX5 Decoder 9. DMX decoding mode setting: Select menu XX click button Enter, display ashes, then click or hold button Up/Down to choose the decoding mode, then click button Back to con rm. DMX address is 00, Ch0 dp. Dimming o use dp. Dimming micro DMX address is 00, Ch0 dp. &, & 5 dp. & & micro, &5,&5 micro dp. &, & 5 DMX address is 00, Ch0 5 6 dp., & 5 dp. micro micro, & 5,&5 micro dp.,&5 master dp5.,&5 master strobe effects DMX address is 00, Ch dp. &5 dp. micro micro micro &5 &5 micro dp5. &5 master dp6. &5 master strobe effects 5/6 ED World Inc. # ST SE CAARY, AB TC B7 CAADA Version. 0/8/6 Copyright 06 ED WORD IC. All Rights Reserved. We are not responsible for errors or omissions. Product and speci cations subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

6 H-DMX08A-5M- DMX5 Decoder Countinue... DMX decoding mode setting: DMX address is 00, Ch dp. 5 dp. micro micro micro micro 5 5 micro dp6.5 5 master dp7.5 5 master strobe effects Federal Communications Commission (FCC) Statement This device complies with part 5 of the FCC rules. Operation is subject to the following two conditions:. This device may not cause harmful interference, and. This device must accept any interference received, including interference that may cause undesired operation. ote: The manufactures is not responsible for any radio or tv interference caused by unauthorized modi cations to this equipment. Such modi cations will void the user's authority to operate the equipment and warranty. THREE YEAR IMITED WARRATY ED WORD IC. warranties this product for three year (some exceptions may apply) from the date of shipping unless otherwise noted in writing. This warranty is expressly in lieu of all other warranties expressed or implied. Under this imited Warranty, the obligation of the company is limited to replacing on a prorated basis, at its option, any component found to be defective. This imited Warranty does not apply to damage caused by buyer or alteration to the product or incorrect power supply. Factory warrantees are covered by the original manufacturer and claims must be submitted to them. Use only with ED World s regulated class power supply. ED World Inc. And its providers will never be liable to you or any other person for any indirect, incidental, consequential, special, punitive or exemplary loss or damage arising from, connected with, the purchase of products, including but not limited to loss of data, business, markets, cost of labour, savings, income, profits, use, production, reputation or goodwill, anticipated or otherwise, or economic loss, under any theory of liability (whether in contract, tort, strict liability or any other theory or law or equity), regardless of any negligence or other fault or wrongdoing (including without limitation gross negligence and fundamental breach) by led world inc. Or any person for whom led world inc. Is responsible, and even if led world inc. Has been advised of the possibility of such loss or damage being incurred. If a product is defective, we will replace the product with similar or identical product or at our option a credit towards a future purchase. To make a claim under this warranty, obtain a return authorization number. 6/6 ED World Inc. # ST SE CAARY, AB TC B7 CAADA Version. 0/8/6 Copyright 06 ED WORD IC. All Rights Reserved. We are not responsible for errors or omissions. Product and speci cations subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).