Datasheet. Embedded Storage Solutions SATA EDOM SDM0CII-V(T/M) CDXXXXGRK-XXXXXXXX. V Aug

Transcription

1 Embedded Storage Solutions SATA EDOM SDM0CII-V(T/M) CDXXXXGRK-XXXXXXXX 1

2 Revision History Revision Date Description Remark V /7/29 First Release V /9/1 Revised Ordering Information V /4/19 Added Toshiba 15nm part number. V /5/23 Added Toshiba 15nm part number. 2

3 Table of Contents REVISED ORDERING INFORMATION PRODUCT DESCRIPTION PRODUCT OVERVIEW PRODUCT FEATURES SYSTEM REQUIREMENT POWER REQUIREMENT OPERATING SYSTEM INTERFACE SPECIFICATIONS SPECIFICATION PHYSICAL SPECIFICATIONS OVERLOOK DIMENSION ELECTRONIC SPECIFICATIONS PRODUCT DEFINITION PIN SIGNAL ASSIGNMENT SUPPORT ATA COMMANDS ERROR DETECTION AND CORRECTION WEAR-LEVELING BAD BLOCKS MANAGEMENT MEAN TIME BETWEEN FAILURES (MTBF) ENDURANCE TRANSFER MODE SATA DOM PIN DIRECTIONS ELECTRICAL CONNECTIONS FOR SATA DOM DEVICE DRIVE ORDERING INFORMATION CONTACT INFORMATION

4 1. Product Description 1.1. Product Overview ACPI SATA DOM SSD Module is the storage device based on NAND flash memory technology. This product complies with Serial ATA standard interface and suitable for data storage media and code storage device for embedded system and boot disk. By using SATA DOM SSD Module, it is possible to operate good performance for the systems, which have SATA interface. With small form factor, the applicable appliance can add or install SATA storage device on its Mother Board or Complete set. Application Fields: Netbook, mini PC, mobile PC. Other machines and Equipment with Serial ATA Interface 1.2. Product Features Small form factor with Serial ATA Standard Interface connector. Memory Capacities SLC: 1 GB 2 GB 4 GB 8 GB Memory Capacities MLC: 8 GB 16 GB 32 GB 64 GB Compliant with Serial ATA Revision 2.6 specification with 1.5 Gbps/ 3.0 Gbps interface rate Compliant with ATA/ATAPI-8 Global Wear Leveling Hardware BCH ECC capable of correcting errors up to 72-bit/1KB Automatic sleep and wake-up mechanism to save power Embedded data buffer. High performance and reliability Noiseless and stable installation to system Operating voltage 5V operation Operating as Boot Disk Support S.M.A.R.T (Self-defined) 4

5 Speed: SLC: Read up to 83 MB/s Write up to 65 MB/s MLC: Read up to 219 MB/s Write up to 93 MB/s Power Consumption < 425 mw Shock: Operating: 1,500G, duration 0.5ms, half sine wave Vibration: 20G peak, 10~2000Hz with 3axis Reliability Test Conditions Reference Standards Vibration 10Hz to 2K Hz, 20G, 3 axes IEC Mechanical Shock Duration: 0.5ms, 1500G, 3 axes IEC Table 1: Shock/Vibration Testing for SATA DOM Humidity: 0 C~55 C / 95% RH, 10cycles Operating Temperature: Standard Grade: 0 C ~ +70 C Industrial Grade: -40 C ~ +85 C Storage Temperature: Standard Grade: -40 C to +85 C Industrial Grade: -55 C to +95 C Fully Compliant with RoHS directive CE and FCC Compatibility 1.3. System Requirement The Host system which is connected to SATA DOM SSD Module should meet system requirements at Minimum; Power Requirement Voltage: DC +5V ± 5% Item Symbol Rating Unit Input voltage VIN +5VDC +- 5% 500mA (max.) V Table 2: SATA DOM Power Requirement Operating System Windows family. Linux family. DOS or embedded system. 5

6 Interface SATA Interface 1.4. Specifications Compliant with Serial ATA Revision 2.6 specification. Compliant with ATA/ATAPI-8 specification. Supports PIO modes 0,1,2,3 and 4 Supports Multi-Word DMA Modes 0, 1 and 2 Supports Ultra DMA Modes 0, 1, 2, 3, 4, 5, and 6 Supports ECC (Error Correction Code) Supports Bad Block Management Supports Wear-leveling 2. Specification 2.1. Physical Specifications Overlook The overlook views of SATA DOM SSD Module are illustrated in Figure 1. Figure 1: SATA DOM SSD Module Overlook Diagram 6

7 Dimension The Dimensions of SATA DOM SSD Module are illustrated in Figure 2 and described in Table 3. Figure 2: SATA DOM SSD Module Dimensions Length Width Thickness ± 0.3mm ± 0.3mm 7.10 ± 0.3mm Table 3: SATA DOM SSD Module Physical Dimension 7

8 2.2. Electronic Specifications Product Definition SATA DOM SSD Module is designed to operate and work as Data or Code Storage device by NAND Flash Memory and its Controller through Serial ATA Standard Interface to Host Systems. Figure 3: SATA DOM SSD Module Block Diagram 2.3. Pin Signal Assignment The signals assigned for Serial ATA applications are described in Table 4 Pin Definition Pin number GND RXP 2 RXN 3 TXN 5 TXP 6 Table 4 SATA DOM connector pin definition 8

9 2.4. Support ATA Commands ATA Command Set - ATA Command Set summarizes the ATA command set with the paragraphs that follow describing the individual commands and the task file for each. Command Set Command Command Code Protocol Execute Drive Diagnostic 90h Device diagnostic Flush Cache E7h Non-data Identify Device ECh PIO data-in Initialize Drive Parameters 91h Non-data Read DMA C8h DMA Read Multiple C4h PIO data-in Read Sector(s) 20h or 21h PIO data-in General Feature Set Read Verify Sector(s) 40h or 41h Non-data Set Feature EFh Non-data Set Multiple Mode C6h Non-data Write DMA CAh DMA Write Multiple C5h PIO data-out Write Sector(s) 30h or 31h PIO data-out NOP 00h Non-data Read Buffer E4h PIO data-in Write Buffer E8h PIO data-out Check Power Mode E5h or 98h Non-data Idle E3h or 97h Non-data Power Management Feature Set Idle Immediate E1h or 95h Non-data Sleep E6h or 99h Non-data Standby E2h or 96h Non-data Standby Immediate E0h or 94h Non-data Security Set Password F1h PIO data-out Security Unlock F2h PIO data-out Security Mode Feature Set Security Erase Prepare F3h Non-data Security Erase Unit F4h PIO data-out Security Freeze Lock F5h Non-data Security Disable Password F6h PIO data-out 9

10 Command Set Command Command Code Protocol SMART Disable Operations B0h Non-data SMART Enable/Disable Autosave B0h Non-data SMART Enable Operations B0h Non-data SMART Feature Set Host Protected Area Feature Set 48-bit Address Feature Set CFA Feature Set Others SMART Return Status B0h Non-data SMART Execute Off-Line Immediate B0h Non-data SMART Read Data B0h PIO data-in SMART Read Threshold B0h PIO data-in SMART Save Attribute Values B0h Non-data Read Native Max Address F8h Non-data Set Max Address F9h Non-data Set Max Set Password F9h PIO data-out Set Max Lock F9h Non-data Set Max Freeze Lock F9h Non-data Set Max Unlock F9h PIO data-out Flush Cache Ext EAh Non-data Read Sector(s) Ext 24h PIO data-in Read DMA Ext 25h DMA Read Multiple Ext 29h PIO data-in Read Native Max Address Ext 27h Non-data Read Verify Sector(s) Ext 42h Non-data Set Max Address Ext 37h Non-data Write DMA Ext 35h DMA Write DMA FUA Ext 3Dh DMA Write Multiple Ext 39h PIO data-out Write Multiple FUA Ext CEh PIO data-out Write Sector(s) Ext 34h PIO data-out Request Sense 03h Non-data Write Sectors Without Erase 38h PIO data-out Erase Sectors C0h Non-data Write Multiple Without Erase CDh PIO data-out Translate Sector 87h PIO data-in Set Features Enable/Disable 8-bit Transfer EFh Non-data Seek 70h Non-data Wear Level F5h Non-data Table 5: ATA Command List 10

11 2.5. Error Detection and Correction Highly sophisticated Error Correction Code algorithms are implemented. The hardware Error Correction Coding (ECC) engine executes parity generation and error detection/correction features, and enhances decoding throughput and data reliability. With multi-mode correction capability up to 72 bits, the powerful ECC engine is able to support the latest generation NAND Wear-Leveling Flash memory can be erased within a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device Bad Blocks Management Bad Blocks are blocks that contain one or more invalid bits whose reliability are not guaranteed. The Bad Blocks may be presented while the SSD is shipped, or may generate during the life time of the SSD. When the Bad Blocks is detected, it will be flagged, and not be used anymore. The SSD implement Bad Blocks management and replacement, Error Correct Code to avoid data error occurred. The functions will be enabled automatically to transfer data from Bad Blocks to spare blocks, and correct error bit. After the reserved block less than 10 of each channel, the SSD will be locked, and cannot be read and written anymore. Host can send a vendor ATA command to unlock the SSD for backup data or system from SSD Mean Time between Failures (MTBF) Failure Rate: The total number of failures within an item population, divided by the total number of life units expended by that population, during a particular measurement interval under stated condition. Mean Time between Failures (MTBF): A basic measure of reliability for repairable items: The mean number of life units during which all parts of the item perform within their specified limits, during a particular measurement interval under stated conditions. Product Condition MTBF (Hours) SATA DOM Telcordia SR-332 GB, 25 C >2,000, Endurance Data Retention: 10 years. Wear-Leveling Algorithm: support. Bad Blocks Management: Support Error Correct Code: Support Table6: SATA DOM MTBF 11

12 2.10. Transfer Mode SATA DOM support following transfer mode: PIO Mode 0~4. Ultra DMA 0~6. Serial ATA I 1.5Gbps Serial ATA II 3.0Gbps 3. SATA DOM Pin Directions 3.1. Electrical Connections for SATA DOM A Serial ATA device may be either directly connected to a host or connected to a host through a cable. For connection via cable, the cable should be no longer than 1 meter. The SATA interface has a separate connector for the power supply. Please refer to the pin description for further details Device drive No additional device drives are required. The SATA DOM can be configured as a boot device. 12

13 4. Ordering Information P/N Capacity Flash Type Temp CDC512MRK-F206A005 CDC001GRK-F306A005 CDC002GRK-F406A005 CDC004GRK-F506A006 CDC008GRK-F606A006 CDC001GRK-F206A005 CDC002GRK-F306A005 CDC004GRK-F406A005 CDC008GRK-F506A006 CDC016GRK-F606A006 CDI512MRK-F206A005 CDI001GRK-F306A005 CDI002GRK-F406A005 CDI004GRK-F506A006 CDI008GRK-F606A006 CDI001GRK-F206A005 CDI002GRK-F306A005 CDI004GRK-F406A005 CDI008GRK-F506A006 CDI016GRK-F606A006 CDC008GRK-G606A00C CDC016GRK-G706A00C CDC016GRK-G606A00C CDC032GRK-G706A00C CDC032GRK-G806A00C CDC064GRK-G806A00C CDC016GRK-G706A0ZC CDC032GRK-G706A0ZC CDC032GRK-G806A0ZC CDC064GRK-G806A0ZC CDI008GRK-G606A00C CDI016GRK-G706A00C CDI016GRK-G606A00C CDI032GRK-G706A00C 512MB 1GB 2GB 4GB 8GB 1GB 2GB 4GB 8GB 512MB 1GB 2GB 4GB 8GB 1GB 2GB 4GB 8GB 8GB 32GB 32GB 64GB 32GB 32GB 64GB 8GB 32GB Toshiba SLC Normal-Temp Toshiba SLC Wide-Temp Toshiba 15nm MLC Normal Temp Toshiba 15nm MLC Wide-Temp 13

14 CDI032GRK-G806A00C CDI064GRK-G806A00C 32GB 64GB Toshiba 15nm MLC Wide-Temp 5. Contact Information ACPI, a storage business company, specializes in the design and marketing of SSD, EDM, and Industry CF products. For further information, please reach us at the following contact information: ACPI Digital Co., Ltd. TEL: FAX: sales@acpigroup.com Address: 11F.-3, No.186, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) 14