NEW! ZERO-UP. Control Flexibility for Worldwide Applications 200W/400W/800W. Built-in RS232 & RS485 Interface with GPIB optional.
|
|
- Catherine Parks
- 5 years ago
- Views:
Transcription
1 NEW! ZERO-UP 200W/400W/800W Programmable DC Power Supplies Built-in RS232 & Interface with GPIB optional. Constant Voltage/Constant Current Built-in RS232 & Interface An embedded Microprocessor controller Digital Encoder Knob Software Calibration Last Setting Memory Parallel Operation (Master/Slave) Active Current Sharing External Voltage or Resistance Programming Voltage up to 20V, Current up to 32A Active Power Factor Correction: 99% 85~265Vac Universal Input Voltage 9" Rack Mounted ATE and OEM Worldwide Safety Agency Approvals CE Mark for LVD and EMC Regulation C US LISTED TESTING EQUIPMENT 65SA.. TUV Rheinland.. geprufte Sicherheit Control Flexibility for Worldwide Applications
2 Product Line Up Output Output Output Model Voltage Current Power ( VDC ) ( A ) ( W ) ZUP ~ ZUP ~ 6 VDC 0 ~ ZUP ~ ZUP ~ ZUP ~ 0VDC 0 ~ ZUP ~ ZUP ~ ZUP ~ 20VDC 0 ~ ZUP ~ ZUP ~ 6 26 ZUP ~ 36VDC 0 ~ ZUP ~ ZUP ~ ZUP ~ 60VDC 0 ~ ZUP ~ ZUP ~ 80VDC 0 ~ ZUP ~ 5400 ZUP ~ 20VDC 0 ~.8 26 ZUP ~ Power Supply Identification / Accessories ZUP 36-2 / Series Name NEW NEW NEW NEW Output Voltage ( 0 ~ 36V ) Output Current ( 0 ~ 2A ) Front Panel L. Output Jacks BLANK: Standard AC Cable E. Europe U. USA O. Unterminated I: SI 32 std. BLANK: None Serial Link Cable W. Cable included BLANK: None Front Panel 3 5 Rear Panel Digital Voltmeter 2. Digital Amperemeter 3. Constant Voltage Mode Indicator 4. Constant Current Mode Indicator 5. Voltage/Current, OVP/UVP, Address Adjust 6. Alarm ( OVP, OTP, FOLD ) 7. Output ON/OFF Control 8. Local/Remote Select 9. Foldback Protection Control 0. AC Power Switch. Voltage/Current Mode Control 2. Overvoltage/Undervoltage Setting 3. Address Setting IEC320 AC Input Connectors 2. Remote IN Programming via RS232/ Remote OUT Via Communications Chaining Power Supplies to Serial Communication Bus. 4. External Analog Programing Control Connector 5. Output Bus Bars (6V to 60V) model shown. 80V to 20V models PHOENIX: PSC Plug Connectors 6. Ground Thread
3 ZUP Configurations BENCH TOP POWER SUPPLY Single Parallel ( Master / Slave ) PARALLEL OPERATION Master - Slave method: Active current sharing up to 5 units. REMOTE PROGRAMMING VIA RS232 Up. to 3 ZUP units can be controlled via RS232 interface. RS232 ZUP () ZUP (2) ZUP (3) 000m max. 0m max. Linking ZUP units with RS232 control. REMOTE PROGRAMMING VIA Up to 3 ZUP units can be controlled via interface. For operation environments that require high noise immunity or long distance communication, it is recommended to use the built- in interface. ZUP () ZUP (2) ZUP (3) 000m max. Linking ZUP units with control. 2
4 Remote Programming Via GPIB. GPIB CONTROLLER The GP485 is a high performance serial to GPIB Interface It enables a ZUP series with port to be a Talker, Listener, or controller on the GPIB * Controls up to 3 ZUP units through a single GPIB address. * Conforms to all versions of the IEEE488 standard, including IEEE GPIB BUS GP485 ( ) ZUP ( ) ZUP (3) * 9 racking possibility. * Application software - LabView, LabWindows. GP485 ( 2 ) ZUP ( ) ZUP (3) GP485 (4 ) ZUP ( ) ZUP (3) Rack Mounted ATE and OEM up to 2.4KW Six units can be assembled into 9-inch rack / 3U high to meet your configuration requirements Power Modules Table Module Type 0 ~ 6V 0 ~ 0V 0 ~ 20V 0 ~ 36V 0 ~ 60V 0 ~ 80V 200W 33A 20A 0A 6A 3.5A 2.5A 400W 66A 40A 20A 2A 7A 5A 800W 32A 80A 40A 24A 4A 0 ~ 20V 9"rack width.8a / 6 width 3.6A / 6 width 2 / 6 width 3
5 Zup Series Specifications MODEL OUTPUT VOLTAGE ( *) V OUTPUT CURRENT ( *2) A RATED OUTPUT POWER W CONSTANT LOAD REGULATION - VOLTAGE LINE REGULATION - RMS RIPPLE (5Hz-MHz Bandwidth) mv RIPPLE (pk to pk) (20MHz Bandwidth) mv RECOVERY TIME ( *3) ms TEMPERATURE COEFFICIENT - TEMPERATURE DRIFT - UP PROGRAMMING RESPONSE TIME (*4) ms DOWN PROGRAMMING FULL LOAD ms RESPONSE TIME NO LOAD ms CONSTANT LOAD REGULATION ( *5) - CURRENT LINE REGULATION ( *6) - RMS RIPPLE (5Hz-MHz Bandwidth) ma TEMPERATURE COEFICIENT - TEMPERATURE DRIFT ( *8) - PROGRAMMING ( *9) RESOLUTION - VOLTAGE ACCURACY - RESOLUTION - CURRENT ACCURACY - OVERVOLTAGE PROTECTION ( *0) V HOLD-UP TIME - DISPLAY VOLTAGE - CURRENT - STATUS - OUTPUT PROTECTIONS - INPUT INPUT VOLTAGE ( *) - INPUT CURRENT ( *2 ) A INRUSH CURRENT ( 00/200V ) A EFFICIENCY ( *2 ) % INPUT CURRENT HARMONICS - POWER FACTOR (TYP) - ENVIRONMENT OPERATING TEMPERATURE - OPERATING HUMIDITY - STORAGE TEMPERATURE - STORAGE HUMIDITY - MECHANICAL VIBRATION - SHOCK - WEIGHT Kg SIZE (WxHxD) mm EXTERNAL CONTROL OUTPUT ON/OFF - FUNCTIONS OUTPUT GOOD - OUTPUT VOLTAGE PROGRAMMING - OUTPUT CURRENT PROGRAMMING - REMOTE SENSING - COMMUNICATION INTERFACE - APPROVALS SAFETY STANDARDS - EMC STANDARDS - CONDUCTED EMI - RADIATED EMI - SERIES OPERATION - PARALLEL OPERATION - COOLING - WITHSTAND VOLTAGE - ISOLATION RESISTANCE - ZUP6-33 ZUP6-66 ZUP6-32 ZUP0-20 ZUP0-40 ZUP0-80 ZUP %+2mV From No load to Full load, constant input voltage %+mV From 85-32VAC or VAC, constant load ppm/ C from rated voltage following 30-minute warm-up. 0.0%+2mV Change in output over 8-hour interval under constant line, load and ambient temp followin %+5mA 0.0%+5mA 0.07%+0mA 0.0%+5mA 0.0%+5mA 0.07%+0mA 0.0%+5mA 0.0%+2mA 0.0%+2mA 0.0%+5mA 0.0%+2mA 0.0%+2mA 0.0%+5mA 0.0%+2mA ppm/ C from rated current following 30-minute warm-up. 0.02%+5mA 0.02%+5mA 0.05%+0mA 0.02%+5mA 0.02%+5mA 0.05%+0mA 0.02%+5mA Better than 0.028% of rated output voltage 0.02%+5mV 0.02%+8mV Better than 0.03% of rated output current 0.4%+40mA mS At 00V/200VAC, rated output voltage and output current. 3 digits ( 6v; 20v; 36v; 60v; 80v); 3.5 digits ( 0v; 20v ) accuracy: 0.2% +/- 2 digits. 3.5 digits (32A); All others 3 digits, accuracy: 0.5% +/- 3 digits. CV/CC, Alarm, Fold, Local/Remote, On/Off. Over Voltage, Over Temperature, Foldback Vac Continuous, 47-63Hz 3.0/.5 5.6/2.7.2/ /.4 5.6/2.7.2/ /.4 5/30 (*7) /30 (*7) /30 (*7) 69/72 74/77 74/77 73/77 79/82 77/8 74/78 Complies with EN , Class A 0.99 at 00/200Vac, 00% load. 0 to 50 C ; 00% Load % RH ( No dewdrop ). -20 to 70 C 0-95% RH (No dewdrop). 0-55Hz, Amplitude (sweep min ) 2G, X, Y, Z, When mounted with mounting screws. Less than 20G W and 400W units: 70 x 24 x W units: 40 x 24 x 350 (Refer to outline drawing) By TTL Signal or Dry Contact (Refer to instruction manual). Open collector (Refer to instruction manual). By Voltage ( 0-4V ) or by Resistance ( 0-4K ) (Refer to instruction manual). By Voltage ( 0-4V ) or by Resistance ( 0-4K ) (Refer to instruction manual). Maximum 0.5V drop on each load wire for model up to 60V and 2V for the 80V, 20V models RS232 and Built-in, IEEE488 Optional. UL3-, EN600- EN6326-, IEC 6326-, FCC part 5 (class A). EN55022-B, FCC-B, VCCI-2 EN55022-A, FCC-A, VCCI- Up to 2 units (Refer to instruction manual). Master - Slave method; up to 5 units (Refer to instruction manual). Forced air by blower fan (Blower fan is mounted within unit). Input - Chassis...2.0kVAC min, Input - Output...3.0kVac min, Output - GND...500VAC min. More than 00MOhm at 25 C and 70% R.H. NOTES: *. Minimum voltage is guaranteed to maximum 0.2% of the rated output voltage. *2. Minimum current is guaranteed to maximum 0.4% of the rated output current. *3. Time for recovery to within +/-50mV against current change of 50% to 00%. *4. From zero volts to full scale, resistive load and current setting at maximum. *5. From no load to full load, constant input voltage. *6. From 85~32Vac or 70~265Vac constant load. *7. At cold start Ta=25 C. 4 *8. Change in output over 8 hour interval constant line, load and ambient temperature following 30-minutes warm-up. *9. Given for control of the output via the serial communication or via front panel controls. *0. Inverter shut down method, manual reset (OVP will shut down output) *. For cases where conformance to various safety specs. (UL, IEC, etc.) are required, to be described as VAC (50/60Hz) on name plate. *2. At 00V/200V and Maximum Output Power.
6 ZUP20-20 ZUP20-40 ZUP36-6 ZUP36-2 ZUP36-24 ZUP ZUP60-7 ZUP60-4 ZUP ZUP80-5 ZUP20-.8 ZUP %+4mV 0.005%+2mV g 30-minute warm-up %+5mA 0.07%+0mA 0.0%+5mA 0.0%+5mA 0.07%+0mA 0.0%+5mA 0.0%+5mA 0.07%+0mA 0.0%+5mA 0.0%+5mA 0.0%+5mA 0.0%+5mA 0.0%+2mA 0.0%+5mA 0.0%+2mA 0.0%+2mA 0.0%+5mA 0.0%+2mA 0.0%+2mA 0.0%+5mA 0.0%+2mA 0.0%+2mA 0.0%+2mA 0.0%+2mA %+5mA 0.05%+0mA 0.02%+5mA 0.02%+5mA 0.05%+0mA 0.02%+5mA 0.02%+5mA 0.05%+0mA 0.02%+5mA 0.02%+5mA 0.02%+5mA 0.02%+5mA 0.02%+2mV 0.02%+20mV 0.02%+35mV 0.02%+50mV 0.02%+80mV /2.7.2/ /.4 5.6/2.7.2/ /.4 5.6/2.7.2/ /.3 4.9/ /.4 5.3/ /30 (*7) /30 (*7) /30 (*7) 5 5/30 (*7) 5 79/83 79/82 76/80 80/84 80/84 75/79 80/84 80/84 78/82 83/87 78/82 82/
7 GP485 SPECIFICATIONS The GP485 has all the software and logic required to implement the physical and electrical Specifications of the IEEE488 and standards Input Voltage /freq Input consuption IEEE 488 Capability Indication LED s Baud rate Address Operating temp Storage temp Conducted emission Radiated emission Safety standards EMC standards Withstand voltage Vibration Size (WxHxD) Weight 85 ~ 265Vac continuous 47 ~ 63 Hz 5W SH,AH,T6,TE0,L4,LE0,SR,RL0,PP,DC,DT0,C0,E,E2 Power /Ready,Talk,Listen,SRQ Optional 300, 600,200, 2400, 4800, 9600 Default :9600 up to 30 can be set using an address switch 0~ ~ 70 EN5022B,FCC-B EN5022A,FCC-A UL3-, EN600- EN6326-, IEC 6326-, FCC part 5 (class A). Input - Chassis 2.0kVAC min, Input - Output 3.0kVac min, Output - Chassis 500VAC min. 0-55Hz, Amplitude (sweep min ) 2G, X, Y, Z, When mounted with mounting screws. 70x24x350 (GP 485 has all the mechanical specifications & mounting hole as ZUP200W/400W units).95 Front Panel Rear Panel Power/Ready: Indicates that the power is ON and the self-test has passed successfully. The unit is ready to operate once the LED illuminates. 2. Talk: Indicates that the GP485 is addressed as a GPIB Talker. 3. Listen: Indicates that the GP485 is addressed as a GPIB Listener. 4. SRQ: Indicates that the GP485 signal line SRQ is asserted. 5. AC ON/OFF: Turns AC power On and Off.. OUT: EIA-568A shielded type connector, used for communication with ZUP power supplies. 2. GPIB: Shielded 24-pin Champ female connector, with metric screwlock. Used for GPIB communication with the GPIB controller. 3. AC Input: IEC type appliance inlet. 4. XXXXXXXXXXXX 6
8 ADDR OVP/UVP V/A FOLD REM OUT Outline Drawings ZUP 200W/400W Units + _ _ Note 30.0 External Control Connector POWER SUPPLY CV ALM +V -V V CC + _ A + _ 3.0 NEMIC-LAMBDA LTD. H POWER _ DIMENSIONS: mm 70x24x350 WEIGHT: Kg 200W units: W units: 3.2 Note:. Housing AMP: with pins AMP: Header PHOENIX: PSC,5/3-M-PE Plug PHOENIX: PSC,5/3-3-F Plastic cable housing Included with the power supply _ + _ B A A B 48.4 _+ 0.5 B A A B Mounting Holes Tap M4 x 4 marked A Rubber Bumpers 4 places marked B (removable) RS232/ communication connectors IEC320 AC Inlet Outline Drawings ZUP 800W Unit + _ _ REMOVABLE HANDLE 30.0 Note External Control Connector _ _ _ V -V Note 2 Rear Panel Output Voltage Connector For 80V, 20V Models. +V -V POWER _ _ 20.0 DIMENSIONS: 40x24x350 mm. B A A B 8.5 RS232/ communication connectors IEC320 AC Inlet WEIGHT: 5.8 kg. Note:. Housing AMP, with pins AMP, Included with the power supply. Rubber Bumpers: 4 places marked B (removable) B 8.90 _+ 0.5 A A _ 0.5 B Mounting Holes: Tap M4 x 4 marked A 7
9 Accessories. AC Cord Sets Three optional cords are possible according to order: Region North America Europe SI- 32 Std AC Cord 5A / 25Vac 0A / 250Vac 0A / 250Vac L=2m L=2m L=2m Power Supply Connector IEC320-C3 IEC320-C3 IEC320-C3 Wall Plug NEMA 5-5P INT L 7/ VII SI-32 P/N ZUP/U ZUP/E ZUP/I North America Europe SI-32 Standard 2. Communication Cable RS232/ cable is used to connect the power supply to the PC controller Mode RS232 RS232 PC connector DB-9 DB-25 DB-9 DB-25 Communication cable Shield Ground, L=m Shield Ground, L=m Shield Ground, L=m Shield Ground, L=m Power Supply Connector EIA / TIA-568A (RJ-45) EIA / TIA-568A (RJ-45) EIA / TIA-568A (RJ-45) EIA / TIA-568A (RJ-45) P/N ZUP/NC40 ZUP/NC403 ZUP/NC402 ZUP/NC404 DB-25 (female connector) DB-9 (female connector) EIA/TIA (RJ-45) 3. ZUP serial link cable Used to chain Power Supply to Power Supply from a serial communication bus Mode Communication cable Shield Ground, L=50cm Power Supply Connector Remote IN /OUT EIA /TIA -568 A (RJ-45) P/N ZUP/ W 8
10 Options ( 200W, 400W, 800W Models ). FRONT PANEL OUTPUT JACKS P/N: ZUP / L Outline Drawing: Physical Dimensions in mm. ZUP 200W/400W Units: 70x53x405.9 ZUP 800W Units: 40x53x Up to 20A output current via front panel jacks. 2. ZUP ASSEMBLIES Dual Output Packing 200W/400W models P/N: NL Max Up to six power units can be assembled into a 9, 3U rack, kit P/N NL00. In cases where the entire rack is not occupied with power units, NL0 blank panels can be installed. P/N: NL
Control Flexibility for Worldwide Applications
AD0908-C ZERO-UP 200W/00W/800W Programmable DC Power Supplies Built-in RS-232 & RS-85 Interface with IEEE88 (GPIB) optional. Constant Voltage/Constant Current Built-in RS-232 & RS-85 Interface An embedded
More informationZ+ Series. 200W, 400W, 600W and 800W Programmable DC Power Supplies. Z+ Series 1. Model Selector. Minimises system rack height
Z+ Series www.uk.tdk-lambda.com/zplus Features 2U high Built-in USB, RS232 & RS485 Optional LAN, GPIB & isolated analogue programming interfaces Outputs up to 650Vdc Arbitrary function generation 5 year
More informationZUP SERIES. Model naming method. Features. Applications. Conformity to RoHS Directive. Product Line up ZUP / Programmable CVCC 200W 800W 19Model
SERIES Programmabe CVCC 200W 800W 19Mode 800W 200W, 400W 3 Features Constant Votage/Constant Current uit-in RS232 & RS485 Interface An embedded Microprocessor controer Digita Encoder Knob Software Caibration
More informationZERO-UP. Control Flexibility for Worldwide Applications. 200W/400W/800W Programmable DC Power Supplies
ZERO-UP 200W/400W/800W Programmable DC Power Supplies Built-in RS-232 & Interface with IEEE488 (GPIB) optional. Constant Voltage/Constant Current Built-in RS-232 & Interface An embedded Microprocessor
More informationGEN W SERIES. LXI Compliant LAN. Laboratory Power Supplies: 750 ~ 1500W. Features. Programming Options: How to order:
GEN-W SERIES Features High Power Density / W in 1U Rack Wide range input: 85 ~ 264Vac, with Power Factor Correction voltage up to 600V, current up to 200A Built-in RS232 / RS-485 Interface Standard Last
More informationFeatures. LXI Compliant LAN. Power W GEN V 0 55A 3300W GEN V 0 42A 3300W GEN V 0 33A 3300W GEN V 0 22A 3300W
www.heliosps.com Features High Power Density 3.3KW in 2U Single phase 240VAC or 3phase 208VAC, 415VAC Power Factor Correction voltage up to 600V, current up to 400A Built-in RS232 / RS-485 Interface Standard
More informationFeatures. LXI Compliant LAN. Power GEN V 0 65A 5200W GEN V 0 50A 5000W GEN V 0 34A 5100W GEN V 0 25A 5000W
Features High Power Density 5KW in 2U 3 phase input 208VAC or 415VAC Power Factor Correction voltage up to 600V, current up to 600A Built-in RS232 / RS-485 Interface Standard Last Setting Memory: Front
More informationFeatures. Line Regulation. Load Regulation. Safety. Cooling. Input Connectors. Output Connectors. Overvoltage Protection. Over Temperature Protection
Specifications: Input Voltage ( 3 phase ) No of Phases Input Frequency 208VAC ( 170 ~ 265 ) Code: 3P208 415VAC ( 342 ~ 460 ) Code: 3P400 Wye or Delta, 4 wire 3phase and one protective earth. 47 ~ 63Hz
More informationSeries. Programmable DC Power Supplies 200W/400W/600W/800W in 2U Built-in USB, RS-232 & RS-485 Interface
Series Programmable DC Power Supplies 200W/400W/600W/800W in 2U Built-in USB, RS-232 & RS-485 Interface Optional Interface: L A N IEEE488.2 SCPI (GPIB) Multi-Drop Isolated Analog Programming Features Include:
More informationFeatures. Conducted Emission. Radiated Emission. Line Regulation. Load Regulation. Safety. Cooling. Input Connectors.
Specifications: Input Voltage ( 1 phase ) ( 3 phase ) No of Phases Input Frequency 230VAC ( 170 ~ 265 ) Code: 1P200 208VAC ( 170 ~ 265 ) Code: 3P208 415VAC ( 342 ~ 460 ) Code: 3P400 1phase or 3phase Wye
More informationFeatures. Conducted. Emission. Line Regulation. Load Regulation. Safety. Cooling. Input Connectors. Overvoltage Protection. Phase Loss.
Features Specifications: High Power Density 3.3KW in 2U 1 phase 240vac input 3 phase input 208VAC / 415VAC options Power Factor Correction Output voltage up to 600V, current up to 400A Built-in RS232 /
More informationFeatures. LXI Compliant LAN. Power GEN V 0 40A 2400W GEN V 0 30A 2400W GEN V 0 24A 2400W GEN V 0 16A 2400W
Features High Power Density 2.4KW in 1U Single phase 240VAC or 3phase 208VAC Power Factor Correction voltage up to 600V, current up to 300A Built-in RS232 / RS-485 Interface Standard Last Setting Memory:
More informationProgrammable DC Power Supplies 750W/1500W in 1U Built in RS-232 & RS-485 Interface Advanced Parallel Operation Optional Interface:
Improved Specifications Programmable DC Power Supplies W/W in 1U Built in RS-232 & RS-485 Interface Advanced Parallel Operation Optional Interface: Compliant LAN IEEE488.2 SCPI (GPIB) Multi-drop Isolated
More informationProgrammable Power Supply ( Supplies )
Programmable Power Supply ( Supplies ) Innovating Reliable Power Innovating Reliable Power 2 Contents Page Genesys 6 Software / Features 7 Product range / how to order 8 Front / rear panel description
More informationImproved. Specifications
Improved Specifications Programmable DC Power Supplies 2.4kW in 1U Built in RS-232 & RS-485 Interface Advanced Parallel Operation Auxiliary s 5V & 15V Optional Interface: Compliant LAN IEEE488.2 SCPI (GPIB)
More informationKEPCO GIVES YOU ZERO-UP PROGRAMMABILITY IN AN AFFORDABLE POWER MODULE
146-1915 More than switch mode boxes with wide-range a-c/d-c input power factor correction and current-share capacity... KEPCO GIVES YOU ZERO-UP PROGRAMMABILITY IN AN AFFORDABLE POWER MODULE RKW 300W 92
More informationProgrammable Digital Controlled DC Power Supplies
Smart choice for power Programmable Digital Controlled DC Power Supplies High Power and Performance for: ATE Bulk Power Production Test OEM Burn-in www.xantrex.com XDC Series Digital Power Supplies 6 kw
More informationSeries Watt DC Power Supplies
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Series 2268 850-Watt DC Power Supplies Specifications SPECIFICATION CONDITIONS This document contains
More informationGenesys TM. Programmable DC Power Supplies 10/15kW in 3U Built in RS-232 & RS-485 Interface Parallel Current Summing Optional Interfaces: Compliant
Genesys TM Programmable DC Power Supplies /kw in 3U Built in RS-232 & RS-485 Interface Parallel Current Summing Optional Interfaces: USB Compliant LAN IEEE488.2 SCPI Multi-Drop Isolated Analog Interface
More informationApplications Electronic Design/Development Battery Charging Launch Control Rackmount ATE Systems. DLM 600 Near Linear 600W DC Power Supply
Applications Electronic Design/Development Battery Charging Launch Control Rackmount ATE Systems DLM 600 Near Linear 600W DC Power Supply DLM 600 Near Linear Power Supply The DLM 600W Series of programmable
More informationTest and Measurements Automated Systems Component Device Testing Semiconductor Processing & Burn-in Aerospace & Satellite Testing
The TSR10 is a 10 kw, 3-phase input voltage 360-440 VAC power supply with an adjustable DC output voltage between 0.5 V and 50 V and output current between 0.5 A and 200 A. The power supply has been designed
More information3000W Programmable Single Output AEK AEK AEK AEK
000W Programmable Single Output Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (0% ~ 05%) High power density 6.W / inch³ Forced current sharing
More informationPFE-S SERIES Single Output AC-DC Power Module UL / EN60950 Low Voltage Directive CSA C22.2 No Features Model naming method
PFE-SSERIES 2 29 PFE300S PFE300S Specifications Voltage Range (*2)(*5) V AC85-265 Frequency (*2) Hz 47-63 Input Power Factor (min) (*1)(*5) 0.95 Efficiency (typ) (*1) 81 / 83 83 / 85 Current (*1) A 4.0
More informationZERO-UP 200W/400W/800W
.. DENSEILAMBDA ZEROUP 200W/400W/800W Programmable DC Power Supplies Constant Voltage/Constant Current Builtin RS232 & RS485 Interface with GPIB option. C US LISTED.. TESTING EQUIPMENT TUV Rheinland 65SA
More informationSorensen DLM 600 Series W V 2 75 A. Half Rack Programmable DC Power Supply
Sorensen DLM 600 Series Half Rack Programmable DC Power Supply high, half rack (8.5 inches) wide; no top or bottom clearance spacing required. rms, noise as low as 15mV p-p. 0-5kΩ. 375 600 W 5 300 V 2
More informationVP ELECTRONIQUE MASSY - Tel
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
More informationModel No. ( Single Output ) ATC-3.3S ATC-5S ATC-12S ATC-15S ATC-24S Max Output Wattage (W) 10W 10W 10W 10W 10W VAC or VDC
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
More informationSorensen DLM 600 Series W V 2 75 A. Half Rack Programmable DC Power Supply
Sorensen DLM 600 Series Half Rack Programmable DC Power Supply High Power Density: 600 watts in 1U (1.75 inches) high, half rack (8.5 inches) wide; no top or bottom clearance spacing required. Near Linear
More informationPower Supply. Users Guide PRODUCT MANUAL. WESTELL.COM Westell Technologies MNL rd
PRODUCT MANUAL Power Supply Westell Technologies. 960-1152-MNL rd DISCLAIMER All information and statements contained herein are accurate to the best of Westell Technologies knowledge. Westell Technologies
More informationADC7520 SERIES. 1600W Battery Chargers and Power Supplies
ADC7520 SERIES 1600W Battery Chargers and Power Supplies Wide output adjustment range 0 72VDC Analog control by external 0-5VDC voltage Temp.comp charging, sense as on option Power fail relay alarm Master-Slave
More informationIndustrial Power Supplies
50-600 Watt Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise
More informationSorensen XT Series W A. 60 Watt Linear Performance DC Power Supply V. Low noise and ripple. Excellent line/load regulation
Sorensen XT Series 42 60 W 60 Watt Linear Performance DC Power Supply 7 250 V Low noise and ripple Excellent line/load regulation Fast transient response Constant voltage or constant current operation
More informationSeries Programmable DC Power Supplies 1.7kW-5kW in 1U 0-600V / 0-500A 10kW in 2U / 15kW in 3U / A 1.5), USB, RS-232 & RS-485 Interfaces
Built-in LAN ( Series Programmable DC Power Supplies 1.7kW-5kW in 1U 0-600V / 0-500A 10kW in 2U / 15kW in 3U / 0-1500A 1.5), USB, RS-232 & RS-485 Interfaces Built-in Remote Isolated Analog Program/Monitor/Control
More information300 WATT, PFC, OPEN FRAME POWER SUPPLIES TABLE 1. OUTPUT RATINGS AND SPECIFICATIONS, RMW 300W SERIES
INSTRUCTION MANUAL KEPCO An ISO 9001 Company. 300 WATT, PFC, OPEN FRAME POWER SUPPLIES RMW 300W SERIES I INTRODUCTION SCOPE OF MANUAL. This instruction manual covers the installation and operation of the
More informationGenesys TM. Programmable DC Power Supplies 750W in a 1U half-rack size
Genesys TM Programmable DC Power Supplies W in a 1U half-rack size Built in RS-232 & RS-4 Interface Parallel Current Summing Optional Interfaces: USB Compliant LAN IEEE4.2 SCPI Multi-Drop Isolated Analog
More informationPOWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification
POWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification 1. Scope 2. Electrical Specification 2.1. AC Input Requirements 2.1.1. Input Voltage 2.1.2. Input Frequency
More informationVariable Regulated DC Power Supplies PAD-LA Series
Internet http://www.kikusui.co.jp/ DC Power Supply Variable Regulated DC Power Supplies PAD-LA Series Type III, Type IV, Maximum Output Voltage (16V to 250V) 10 models High Performance and High Reliability
More information360W and 720W Programmable DC Power Supplies
3-Year Warranty Series 2260B 360W and 720W versions with voltage up to 80V and current up to 72A Combine power supplies in serial and parallel combinations to expand voltage and current outputs up to 160V
More informationVoltage Current Front-mounting bracket
Switching Power Supply S8PS Compact DIN-Rail Mounting Industrial Power Supplies with Capacities Up to 600 W Models range from 0 W to 600 W. Universal input: voltage range 0 to 240 VAC. Power Factor Correction
More informationSPECIFICATIONS. Input Output Agency Approvals 0 ~ 62.5A. toll-free (603)
Technical Data Sheet 750 Watt, 12 Volt, Single Output Power Supply With PFC, Voltage & Current Trim Functions UNIT CODE PS-RSP 750-12 DESCRIPTION 750 Watt 12 Volt, Single Output Power Supply with PFC plus
More informationSnaptec Australia Pty. Ltd.
KEY FEATURES Universal Input: 90-264 VAC With P.F.C. Function, PF>0.95 Remote ON/OFF Function Current Share Function Power Good Function High Efficiency up to 90~93% Protections: Over Load / Over Voltage
More informationIndustrial Power Supplies
75-600 Watt Features Switch mode power supplies for DIN-rail mounting 4 power ranges with 3, 6, 12 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise EMI complies
More information< 50 A max. (115 VAC) / < 70 A max. (230 VAC)
KEY FEATURES U Bracket Switching Power Supply Universal Input: 90-264 VAC Active P.F.C. Function, PF>0.95 300W Convection without FAN 480W Convection with 18CFM FAN Protections: Over Load / Over Voltage
More informationefo Series Wide range AC/DC Single Output 1000W Rugged Power Supply Electrical Specification for: Telkoor Part Number:
Electrical Specification for: efo1000-124 Series Wide range AC/DC Single Output 1000W Rugged Power Supply Telkoor Part Number: 900-1124-1000 GENERAL SCALE RELEASE DATE 05/08/2012 SHEET 1 OF 6 Rev Level
More informationGSP750 Series. 750 Watts. AC-DC Power Supplies. Models & Ratings. Input
C-DC Power Supplies 750 Watts 900 W Peak Power Rating for 100 ms Universal 80-264 VC Input IT & Medical Safety pprovals 1.0 W Standby Power -40 C to +70 C Operation Remote On/Off 5 V/3 Standby Output 3
More information48V 2KW 1U AC-DC Power Supply PS Electrical Specification for: Telkoor Model:
Electrical Specification for: Telkoor Model: 48V 2KW 1U AC-DC Power Supply PS-2048 SCALE RELEASE DATE 26/06/11 SHEET 1 OF 11 REVISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective
More informationProgrammable DC power supplies
3-Year Warranty Series 2260B 360W, 720W, and 1080W versions with voltages up to 800V and currents up to 108A Programmable voltage or current rise and fall times prevents damage to low impedance loads from
More informationSorensen XT Series W A. 60 Watt Linear Performance DC Power Supply V
Sorensen XT Series 42 60 W 60 Watt Linear Performance DC Power Supply 7 250 V Low noise and ripple Excellent line/load regulation Fast transient response Constant voltage or constant current operation
More informationLFWLP225 SERIES 225 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.00
Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature 3.37m Hours, Telcordia
More informationMPM-U653-DCF-B M/N: MPM-U653-DCF-B. 650W Medical AC / DC SPECIFICATION FOR SWITCHING POWER SUPPLY. Revision History
SPECIFICATION FOR SWITCHING POWER SUPPLY M/N: Revision History Version Date Change Items Rev. 1.0 July.21. 2017 Established. Page 1 Models & Ratings FEATURES 650W medical power supply with force air cooling.
More informationSPECIFICATIONS: PSAK650
FEATURES RoHS Compliant Power OK Signal (Power Good, Logic low) Intelligent LED Indicators Remote On/Off and Remote Sense Function High Efficiency up to 91% Forced Current Sharing at Parallel Operation
More informationPSC-AC. PSC AC-series W 1 to 3 Outputs. AC-DC Power supply. Input Voltage ranges. Single output ratings. 2-3 outputs ratings
PSC-AC AC-DC Power supply PSC AC-series 100-240W 1 to 3 Outputs Input / Output Wide input voltage ranges. Single outputs from 5 to 48 V. Two to three outputs 5 to 24 V. Operation High efficiency Operating
More informationThe APR YE meets UL/CSA and all international safety requirements. It is SELV. Min Typ Max 90
APR-12-12-YE 12V Output, 12 Watts AC Front End FEATURES Wide input voltage range (9-264VAC) with active power factor correction Active current share Full protection; overvoltage, overcurrent and overtemperature
More informationRMX-410x USER MANUAL RMX-4101 RMX-4102 RMX Rackmount Programmable DC Power Supplies 200W/400W/800W Built-in USB, RS-232, RS-485, LAN Interface
RMX-410x Rackmount Programmable DC Power Supplies 200W/400W/800W Built-in USB, RS-232, RS-485, LAN Interface USER MANUAL This Manual Covers Models: RMX-4101 RMX-4102 RMX-4104 NATIONAL Worldwide Technical
More informationOutput Voltage in Constant Voltage Mode. Model Number
Supplies LDB75 Supply Constant Voltage /Current LDB Series FEATURES Universal Input: 90-305VAC Constant Voltage/Current High Efficiency 91% Class II IP67 rated Class 2 device (UL1310) Power Factor: Typical
More informationConstant Voltage Mode
FEATURES: AC Input 1~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP Flicker Free High Operating Ambient Temp.: -3 ~+6 Surge protection: L-N 4KV, L-FG/N-FG 8KV Safety: UL 875 / PSE EMI:
More informationAIM & THURLBY THANDAR INSTRUMENTS
AIM & THURLBY THANDAR INSTRUMENTS MX Series Multi output dc power supplies - 315 or 375 watts Three high performance outputs each with multiple ranges 70V max. and 6A max. (MX100T), 120V max. and 20A max.
More informationAIM & THURLBY THANDAR INSTRUMENTS
AIM & THURLBY THANDAR INSTRUMENTS MX100T & MX100TP Triple output dc power supplies - 315 watts Three full performance outputs of equal power Multiple-ranges, up to 70V and up to 6A Ultra-compact size for
More informationProgrammable DC Power Supplies XLN Series
Data Sheet New Family of High Density System Power Supplies The B&K Precision XLN series are programmable, single-output DC power supplies, that provide clean power up to 1560 watts in a compact 1U rackmountable
More informationENGINEERING SPECIFICATION SHEET SPEC. Revision History
SPEC. Revision History Revision Change Information Date No. Description Current version 2010/08/01 1 New revision Initial 2011-1-25 2 Fuse is changed T4.0A 2.0 2011-4-1 3 Add AC adapter external dimension
More informationVariable-switching Regulated DC Power Supplies PAS Series
DC Power Supply POWER FACTOR 0.98 EQUIPPED WITH A POWER-FACTOR CORRECTION CIRCUIT Variable-switching Regulated DC Power Supplies PAS Series Constant voltage/constant current, three types of 350 W, 700
More informationLFWLP350 SERIES 350 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.00
Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down
More informationVER05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input. Output
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Interchangeable Mains Connectors Included Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R
More informationMAJOR VA Power Inverter
MAJOR500-500 VA Power Inverter The Major500 is a highly reliable, telecom quality, DC to AC power inverter. The Major500 features full electronic protection, high efficiency and low output noise. The built-in
More informationSFP450-12BG AC-DC Front-End Data Sheet 12V Output, 450 Watts
Features RoHS compliant for all six substances Wide input voltage range (90-264 VAC) with PFC High power density, 9 Watts/cubic inch 1U or 2U height configurations Active current share with ORing FET I
More informationTSX SERIES High power laboratory DC Power Supplies
TSX SERIES High power laboratory DC Power Supplies 350/360 watts, standard and bus programmable Low noise, excellent transient response CV & CI operation with automatic crossover Comprehensive protection
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 55 mm Suitable for mounting in domestic installation panels Very high efficiency and low standby power -> compliance to
More informationLFMWLP225 SERIES 225 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.00
Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Approval to EN60601 3 rd Edition Efficiencies upto 94% -40 to 70 degree operating temperature* Dual fusing 12V / 0.5A Fan Output,
More informationRipple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p
FEATURES 3 Year Warranty 100% Full Load Burn-In Tested Universal AC Input / Full Range Built-In Remote Sense Function Built-In Remote ON/OFF Control Current Sharing up to 2000W (3+1) Forced Air Cooling
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationAIM & THURLBY THANDAR INSTRUMENTS
AIM & THURLBY THANDAR INSTRUMENTS MX100T & MX100TP Triple output dc power supplies - 315 watts Three full performance outputs of equal power Multiple-ranges, up to 70V and up to 6A Ultra-compact size for
More informationDPS SERIES DC POWER SUPPLIES
DPS SERIES: 15kW - 60kW Key features: 15kW to 60kW Models Higher Power Configurations Available 3U Compact Form Factor Voltage Ranges up to 1200 Vdc Current Ranges up to 3000 Adc High-Speed Precision Metering
More informationMAINTENANCE MANUAL. EDACS REDUNDANT POWER SUPPLY SYSTEM 350A1441P1 and P2 POWER MODULE CHASSIS 350A1441P3, P4, AND P5 POWER MODULES TABLE OF CONTENTS
MAINTENANCE MANUAL EDACS REDUNDANT POWER SUPPLY SYSTEM 350A1441P1 and P2 POWER MODULE CHASSIS 350A1441P3, P4, AND P5 POWER MODULES TABLE OF CONTENTS SPECIFICATIONS*... 2 INTRODUCTION... 3 DESCRIPTION...
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 59,5mm Suitable for mounting in domestic installation panels Low output ripples and spikes Fully compliance to ECO-Standard
More informationKeysight Technologies 6550A Series Single-Output, 500 W DC Power Supplies
Keysight Technologies 6550A Series Single-Output, 500 W DC Power Supplies Speed and accuracy for test optimization Data Sheet Introduction This reliable series of 500 W DC power supplies can be controlled
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 77% at 80V AC)
180 Watt Industrial Features 4 x 2 x 0.75 Inches Form factor 180 Watts with Forced Air Cooling Efficiencies upto 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
More informationPS2328 Integrated Power. System
PS2328 Integrated Power System 1 Power System consists of: CONTROL / EXPANSION MODULE One rack (Power Supply Housing). Two identical 48V @ 2000W (1+1 redundant) or Two identical 1500W (1+1 redundant) or
More informationSeries AMEL20-AZ 20 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (/Hz) Input Voltage (VDC) Max wattage (W) Voltage (V) Current max (A) Maximum capacitive load (µf)
More informationSeries MPM-X12Y 120W PFC MEDICAL POWER ADAPTER
FEATURES 120W medical adapter with active PFC Green power CEC/Energy star group complied Designed to meet medical standard type BF rated Conductive EMI meets CISPR/FCC class B Wall mount mechanical construction
More informationVariable Regulated DC Power Supplies PAD-LA Series
Internet http://www.kikusui.co.jp/ DC Power Supply Variable Regulated DC Power Supplies PAD-LA Series Type III, Type IV, Maximum Output Voltage (16V to 250V) 10 models High Performance and High Reliability
More informationSpecification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0 Prepared By: Terry Liou Approved By: Jacky Chi PAGE 1 E. C. List 1.0 Original 2.0 Modify 8.3 Weight 3.0
More information40 & 60 Watt Models. Low Leakage Current. EN61000 Compliant. Single & Multiple Outputs. Cover Kits Available
ECM40-60 40 & 60 Watt Models Small Size 2.0 x 4.0 x 1.2 Low Leakage Current Industrial & Medical Approvals Full Load Available Convection Cooled Wide Operating Temperature 0 C to +70 C Level B Conducted
More informationAC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS MUI65 SERIES
AC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS 2MOPP Medical FEATURES Universal Input Range Operating Temperature Range: -25º to 80ºC (with derating) Compact Package: 2.00 3.00 1.16
More informationA0750 AC-DC POWER MODULE
FEATURES High power density, 7.7W / in³ Net Weight:< 2.2 KG Low profile : 40.8mm (fit 1U 19 shelf R2250 series) Efficiency: 77% ~ 86 % typical Power factor correction (meet IEC1000-3-2 requirements) Overvoltage
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationDPS240/12V Dimmable Power Supply Custom LitePad
Rosco s DPS240/12V Dimmable Power Supply is designed to complement larger Custom LitePad installations. The system comes with power supply and controller all pre-wired and ready to integrate with an array
More informationSWT SERIES. Features. Model naming method SWT Applications. Conformity to RoHS Directive. Product Line up. Triple Output 30W - 100W SWT A-273
SERIES Triple Output 30W - 100W 65 100 30 40 Features CE marking applicable 100V/200V worldwide-applicable input / Multiple outputs / Super low cost type Applicable to consumer products such as bill discriminator
More informationKEPCO SINGLE OUTPUT, 1U SIZE, 100 WATT HOT SWAP PLUG-IN POWER SUPPLIES TABLE 1. OUTPUT RATINGS AND SPECIFICATIONS, HSF-1UR 100W SERIES
INSTRUCTION MANUAL KEPCO An ISO 9001 Company. KEPCO SINGLE OUTPUT, 1U SIZE, 100 WATT HOT SWAP PLUG-IN POWER SUPPLIES HSF-1UR 100W SERIES I INTRODUCTION The Kepco HSF-1UR 100 Watt Series hot swappable,
More informationThe SFP BG meets international safety requirements and is CE marked to the Low Voltage Directive (LVD). Datacom Distributed Power Systems
Ideal server form factor optimizes, space, efficiency, and load variations High efficiency maximized between 30-80% load conditions Unconditionally stable under any load condition Wide input voltage range
More informationApplication Package Dimension Output Input Output Output Protection Option Code Code Power Voltage Quantity Voltage Type (W) (VAC) (VDC)
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 90% at 90V AC)
WLP350 Industrial Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output,
More informationCompactPCI SYSTEM POWER SUPPLIES. CPCI SERIES 150 to 350 Watts, Ac Input with PFC DPCI SERIES 150 to 350 Watts, 48 Vdc Input FEATURES:
CPCI SERIES 150 to 350 Watts, Ac Input with PFC DPCI SERIES 150 to 350 Watts, 48 Vdc Input FEATURES: EXECUTIVE MEMBER 150 W and 200 W in 3U x 8HP, 350 W in 6U x 8HP Fully compliant with PICMG CompactPCI
More informationSeries MV2000 MEDIUM VOLTAGE HIGH CURRENT POWER SUPPLIES
FEATURES 2kW output power Output voltages from 20V to 300V High Packing Density - 2kW in 1U Parallel/series operation Stackable, cooling is front to rear Active Power Factor Correction Custom options available
More informationMPU-120S Series. Single Output, 180W Compact, U-Channel AC/DC Power Supplies. Key Features:
MPU-120S Series Single, 180W Compact, U-Channel AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved Compact U-Channel Five Single Models Meets EN
More informationSeries AME5-CJZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 000V Continuous Short circuit protection Operating Temp: -2 C to 0 C Energy Star compliant Input: -26V, -6Hz, or 20-0VDC pact
More informationAIM & THURLBY THANDAR INSTRUMENTS
AIM & THURLBY THANDAR INSTRUMENTS EL-R & EX-R Series Precision laboratory power supplies - single, dual and triple outputs EL-R Series - linear regulated - 30 watts to 130 watts EX-R Series - mixed-mode
More informationRCB W Rack Mountable Front End Battery Charger. File Name:RCB-1600-SPEC Sicherheit ID
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 1600W Rack Mountable Front End Battery Charger File Name:-SPEC 2016-06-01 SPECIFICATION MODEL -12-24 BOOST CHARGE VOLTAGE(Vboost)(default)
More informationThe ATF YE meets UL/CSA and all international safety requirements. CE mark is pending. Min Typ Max
ATF-1200-12-YE 12V Output, 1200 Watts AC Front End FEATURES Wide input voltage range (90-264VAC) with active power factor correction 1.64 max. height Active current share with ORing FET 5VDC @ 2A Auxiliary
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 77% at 80V AC)
180 Watt Medical Features 4 x 2 x 0.75 Inches Form factor 180 Watts with Forced Air Cooling Approval to EN60601 3rd Edition Efficiencies upto 92% -40 to 70 degree operating temperature* Dual fusing 12V
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 95% at 85V AC)
225 Watt Industrial Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
More information