Data sheet AT-35 active. Arc-Series Architectural Sound Design.

Transcription

1 Data sheet AT-35 active Arc-Series Architectural Sound Design.

2 AT-35 active loudspeaker The Fohhn AT-35 active is equipped with the latest generation of 12 /1 neodymium speakers. AT-35 active is equipped with our proven digital amplifiers and networkable Fohhn Audio DSP with all the benefits. A stereo amplifier with 2x 1000 W/ 8 ohms for connecting a passive Top or a passive subwoofer is integrated in each Top active. Description The Fohhn AT-35 active is equipped with the latest generation of 12 /1 neodymium speakers. The AT-35 active is both very lightweight and extremely powerful thanks to Neodym technology. It can be installed in a vertical or horizontal position and the CD horn (90 x 60 / 60 x 40 ) can be rotated 90. The speakers are timealigned. A precision-made crossover with electronic high-frequency protection circuit is also integrated. The multiply birch wood housing is reinforced with steel brackets and equipped with 9x M8 and 3x M6 threaded inserts for safe installation in accordance with all current regulations. More lightweight and powerful thanks to state-of-the-art Neodym technology. The Arc-Top active active are fully equipped with the latest Neodym speakers and are therefore extremely lightweight. The most impressive aspect of the speakers is that all housings are manufactured from high-quality multiplex beech wood and not plastic. The clear reduction in weight compared to conventional systems results from the use of state-of-the-art digital technology and Neodym speakers. Users also benefit from a reduction in weight and transport space because they no longer need to transport extra equipment and racks to venues. External amplifiers, controllers, crossovers, equalisers and similar equipment are no longer required. The System The new Tops active are equipped with our proven digital amplifiers and networkable Fohhn Audio DSP with all the benefits. A stereo amplifier with 2x 1000 W/ 8 ohms for connecting a passive Top or a passive subwoofer is integrated in each Top active. Every amplifier channel has its own DSP and can be controlled completely separately. The Tops active offer the user a wide range of possible combinations. The Tops active can be combined with passive subwoofers AS-30, AS-40 or XS-30 passive and XS-4 passive. This system requires minimal space and is easy to transport. You no longer have to carry around external racks with amplifiers, controllers/crossovers, EQs, room delays or system compressors. Remote control and remote monitoring The remote control devices are extremely user-friendly and give the user complete control over the audio system from a central location. Perfectly developed speaker systems, state-of-the-art amplifier and DSP technology and an intuitive remote control concept guarantee maximum user comfort and a top-quality sound. These are all standard requirements for a modern sound system. The Fohhn system was developed and systematically refined by our sound experts using perfectly adapted components that are unbeatable when combined in a system. Precision retaining bracket and integral series-standard eyelets for easy set up of Arc-Tops active in flown applications. Full control of flown speakers and access to all speaker system functions using the optional remote control. Tops and Subs All models of Fohhn Top passive and Sub passive can be used. A perfectly adapted preset is available for each passive speaker type. This preset can be activated quickly and easily at the press of a button. The speaker is protected by complex 3-band processing for bass, mid and high frequencies. If you can t find your desired speaker preset don t hesitate to contact Fohhn Audio under info@fohhn.com. Applications Sport halls and arenas, multi-functional halls, theatres, musicals, theme parks, discos, clubs and similar venues. Options All RAL colours and optional accessories for every Top active are available. Fohhn_AT-35 active // Page 02

3 AT-35 active loudspeaker Technical specifications electro-acoustical features acoustic design 2 way, vented components 12 /1 CD (fully neodymium) amplifier output 2x W / 8 ohms SPL max. 130 db frequency range 55 Hz 20 khz Dispersion H x V (-6 db) 90 x 60 / 60 x rotatable horn features enclosure protection grille standard colour front design dimensions (W x H x D) mounting devices weight optional features optional colours weather resistance multiply birch wood ball impact resistant metal, powder coating black, white textured paint acoustic foam 38 x 59 x 42 cm 9x M8 and 3x M6 mounting devices for brackets 20 kg all RAL-colours scratch-proof plastic coating digital amplifier (integrated in Sub) EIA amplifier power ch1 intern 1000 W/ 8 ohms ch2 extern 1000 W/ 8 ohms (1 khz, THD+N < 1%) amplification 35 db input sensitivity 0 V input impedance 10 kohm frequency response 20 Hz 20 khz S/N Ratio >105 dba protective circuit switch-on delay, soft start, impedance- and short-circuit protection, DC protect, temperature monitoring remote control Fohhn-Net, Fohhn Audio Soft remote monitoring temperature, protect, signals power supply 195 V 250 V AC 50/60 Hz, max. 6 A temperature range 0-45 C cooling force cooling, termperature-controlled fan weight ca. 1.8 kg power supply and amplifier Fohhn Mains Control The integrated mains supply monitoring system. During use, the supply to the amplifier is constantly monitored. If at any time it exceeds the maximum permitted range ( VAC), the supply will be interrupted. During power up it also minimizes the input surge current by switching on at the mains Vage zero crossing. controller 2 digital signal prozessors 8 independent limiters selektive 3-band limiting (bass/mid/high) band specific time constants 56-bit double precision filter technology AD/DA 24 bit/48 khz controls Select potentiometer 4 buttons for DSP handling ground/lift switch Power on/off switch indicator LEDs 4 line display 2x Signal/Clip LED 2x run/protect LED receive / send remote LED connections inputs 2x XLR/jacks, multifunctional input jacks signal Input jack 2x XLR Link jacks outputs 2x XLR Link jacks 1x NL4 Neutrik Speakon 8 ohms for external Speaker mains 2x Powercon mains jacks in and thru CAAD simulation data ULYSSES, EASE Top active DSP-amplifier 2x 1000 watts/8 ohms Fohhn Audio DSP four-line display, blue EQ, Compressor/Limiter, Delay, Remote Control, Status display, Sound Presets ch1 + ch2 input + slave ch2 output for connection of another passive Top or Sub Netzwork ports for laptop connection RS485 Powercon mains ports Fohhn_AT-35 active // Page 03

4 System combinations Arc-Top active 2-Way active (stereo amplifier for connecting a passive Top or a passive subwoofer is integrated in each Top active.) Fohhn_AT-35 active // Page 04

5 Remote control and network ability of Fohhn devices with integrated DSP FR-10 remote control wall panel designed for the remote operation of Fohhn devices with integrated DSP. FR remote control unit can be controlled via conventional external buttons or switches. customer-specific switches Compatible with media control systems. Description The FR-10 is a wall mount remote control module designed for the remote operation of Fohhn DSP amplifiers, DSP controllers and active Fohhn speakers systems. The FR-10 is extremely easy to operate because the controls are so well arranged. It is virtually impossible for the end customer to make operating errors because the only operating elements are the 8 labelled buttons. Easy handling Control up to 32 Fohhn devices individually with this stylish FR-10 wall panel. 8 programmable buttons can be configured to control the overall volume of a system, the volume in different zones or presets for different room effects, for example. The system also has a special function that confirms whether all commands have been executed successfully. The buttons indicate this by changing red or green shortly after they are pressed. For example, if a device is not switched on, the button changes red to indicate that a command could not be executed. This additional monitoring function ultimately contributes to the overall operating reliability of your system. The wall panel is easy to configure using a standard computer with intuitive Fohhn-Net Remote software installed. Connections Two terminal strips (paralelled). Alternative connection via standard 4-wire telephone cable. Applications The FR-10 is ideal for training rooms, hotels, churches, halls, restaurants or any venue where a simple, efficient system is required to control your audio equipment from a central location. The FR-10 is also ideal for projects where complex media control systems are not viable or inappropriate, but the user wishes to control the speaker system centrally. Description The FR-20 can be controlled via conventional external buttons or switches (e.g. Jung, Vitra, etc.) or switching contacts (e.g. media control system). Buttons and switches may come in the form of a wall installation module or an individually manufactured control panel, for example. Presets stored in the connected Fohhn DSP devices are activated simultaneously and settings for different scenarios such as speech, music, empty room, full room, etc are loaded when the buttons/ switches are pressed. You can also adjust the volume quickly and easily in 1 db increments using the FR-20. A maximum of 31 Fohhn devices connected to the network can be activated simultaneously at the press of a single button. Integration in a media control system The FR-20 allows the convenient integration of all DSP-controlled Fohhn devices into media control systems (e.g. AMX, Crestron) by means of 8 switching contacts or RS-485 interface. Integration in a EIB bus technology One building, one concept, one system. Fohhn systems equipped with a FR-20 distribution switch comply with the European installation bus technology standard, including all operating comforts. Applications The FR-20 is ideal for training rooms, hotels, churches, halls, restaurants, clubs, bars and many other venues. For simple, reliable remote operation of your audio system without having to install complex, expensive media control systems. Fohhn_AT-35 active // Page 05

6 Accessories for AT-35 active WAT-12 Wall bracket, universal adjustment 360 for AT-30/35/40 and heavy duty also for AT-08/09/10/201 adapter plate 90 -rotatable WLX-600 Wall bracket for AT-35/40/50 and LX-500/501/600/601, heavy duty QAT-34 Horizontal bracket for AT-30/35/40 VAT-34 Vertical bracket for AT-30/35/40 pivots and tilts EB-8 Ring stud DIN 580, zinc, for safety M8 thread for AT-201/30/35/40/50/66 Fohhn_AT-35 active // Page 06

7 Views of AT-35 active Front view Side view Top View Rear view Bottom view Fohhn_AT-35 active // Page 07

8 WAT-12 Wall mount Side view Rear view Top view Fohhn_AT-35 active // Page 08

9 WLX-600 Wall mount Side view Rear view Top view Fohhn_AT-35 active // Page 09

10 VAT-34 Traverse mount Side view Rear view Top view Fohhn_AT-35 active // Page 10

11 QAT-34 Horizontal mount Side view Front view Top view Fohhn_AT-35 active // Page 11

12 SOUNDS PERFECT. IS PERFECT. Fohhn audio systems. The ultimate all-round audio experience. German quality engineered and made by Fohhn Fohhn Audio AG Hohes Gestade Nürtingen Germany Tel Fax