Keysight Technologies InfiniiVision 6000L Series Low-Profile Oscilloscopes

Transcription

1 Keysight Technologies InfiniiVision 6000L Series Low-Profile Oscilloscopes The most space efficient, and affordable LXI C compliant oscilloscopes Data Sheet

2 Introduction Four channels in only 1U space Industry-leading performance: 4-channel digital storage oscilloscope (DSO) models Low profile, high density 1U (4.45 cm, 1.75 inches) package LXI class C compliant 100 MHz, 500 MHz and 1 GHz analog bandwidth Up to 4 GSa/s sample rate Standard 8 Mpts MegaZoom III deep memory Full-scale connectivity Standard USB, LAN, GPIB interface with XGA video output 8-bit vertical resolution (extensible to 12 bits) Built-in Web browser control IVI-COM driver 100% software compatible with 6000A Series portable oscilloscopes Optional segmented memory application Optional secure environment mode The highest performance and lowest cost automated test oscilloscope in its class.

3 03 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Low-profile, high-density package saves rack space The InfiniiVision 6000L Series oscilloscopes provide up to 1-GHz bandwidth in a space-saving 1U-high 19-inch wide package so it saves your valuable rack space. The oscilloscopes have side and rear air vents (no top or bottom air vents) so other instruments can be mounted directly above or below them. Rack mount brackets and rack rails are standard with every unit. LXI class C compliant LAN extensions for Instrumentation (LXI) is the architecture for test systems that s based on proven, widely used standards such as Ethernet. By specifying the interaction of those standards, LXI enables fast, efficient, cost-effective creation and reconfiguration of test systems. The InfiniiVision 6000L Series oscilloscopes are fully LXI class C compliant. The InfiniiVision 6000L Series oscilloscopes follow specified LAN protocols, and adhere to LXI requirements such as a built-in Web control server, IVI driver software, and more. Make the most of your rack space with an InfiniiVision 6000L Series oscilloscope. Easy system integration and configuration To simplify system development, the InfiniiVision 6000L Series oscilloscopes come standard with an IVI-COM (Interchangeable Virtual Instruments) driver, and they support easy-to-use SCPI commands. The standard Keysight Technologies, Inc. I/O Library Suite makes it easy to configure and integrate instruments into your system even if your system includes instruments from other vendors. Establish instrument connection faster with Keysight I/O Library Suite.

4 04 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Built-in Web control The built-in Web server provides remote access and control of the instrument via a standard Java-enabled Web browser on your computer. You can communicate with the scope over the scope s built-in LAN interface. Using the Web browser you can set up measurements, monitor waveforms, capture screen images and operate the scope remotely. Through the remote front panel you have access to the built-in help system that is available in eleven languages. Simply right click on the soft keys to see help for that function. You can also send SCPI commands over the LAN to control your scope. Wherever you are, your InfiniiVision 6000L Series scope is as close as the nearest Web browser. Optional secure environment mode The optional secure environment mode provides the highest level of security by ensuring that internal memory is clear of all setup and trace settings in compliance with National Industrial Security Program Operating Manual (NISPOM) Chapter 8 requirements. You can move the instrument out of a secure area with confidence. When this option is installed, it will store setups and traces to internal volatile memory only. To permanently store data, you can save it to an external memory device via the oscilloscope s front-panel USB port. Remotely display and control your InfiniiVision 6000L oscilloscope from any Java-enabled web browser over the oscilloscope s built-in LAN interface. Up to 12 bits of resolution High resolution mode offers up to 12 bits of resolution in real-time mode, which reduces noise and increases vertical resolution. When operating at slow time base ranges, the InfiniiVision 6000L Series oscilloscopes serially filter sequential data points and map the filtered results to the display. In certain situations, user-controlled averaging can also be used to obtain greater than 8-bits of resolution. Time base Bits of resolution < 100 nsec/div nsec/div 9 2 µsec/div µsec/div µsec/div 12

5 05 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Powerful acquisition with MegaZoom III deep memory 8 Mpt of MegaZoom deep memory comes standard so you can capture long, non-repeating signals, while maintaining high sample rates and good timing resolution. This lets you quickly zoom in on areas of interest. In single-channel mode with 8 Mpts of memory, the DSO6104L can capture a signal over a 2 msec period with a sampling rate of 4 GSa/s (0.25 nsec period). The fast sample rate and deep memory ensure that all high-frequency signal components, up to the full bandwidth of the scope, are captured. MegaZoom III deep memory helps you find details buried in complex signals. You can view fast waveform updates of signals by means of an external dislpay connected to the oscilloscope s XGA out port.

6 06 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Mixed signal analysis option If you work with both analog and digital circuitry, the InfiniiVision 6000L Series oscilloscope can help you see more signal activity in your designs. You can upgrade the 6000L Series oscilloscope to a 4 scope +16 logic timing channel mixed signal oscilloscope (MSO). With the MSO you can trigger on any combination of its scope and logic channels. Easy programming transition One of the biggest challenges in a new product s life cycle is the transition of its test system from development to manufacturing. With LXI, the transition can be achieved much more easily and cost effectively than with cardcage-based systems. Engineers can use the LXI class C compliant InfiniiVision 6000A Series portable oscilloscope during the R&D phase, using the display, keypad and knobs to quickly access a wealth of measurement capabilities. When your product moves to manufacturing, you can use a system-optimized 6000L Series LXI oscilloscope without a display. Because the InfiniiVision 6000A and 6000L are 100% software compatible, your manufacturing system can use the software and test routines developed in R&D without any modification, while you save cost and rack space by moving from a standard bench-top oscilloscope to a 1U high oscilloscope without a display. The MSO option lets you see the complex interactions among your signals on up to 20 channels at the same time. The InfiniiVision 6000A and 6000L Series oscilloscopes are 100% software compatible, enabling smooth test system transition.

7 07 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Keysight InfiniiVision 6000L Series Oscilloscopes: The most space efficient LXI C compliant oscilloscopes Standard rack mount brackets Status indicators Four channels in only 1U space Side air vents Waveform intensity control (for external display) Built-in USB port AutoProbe Interface XGA video out port Standard LAN, USB and GPIB ports Ext Trig in, Trig out and 10 MHz ref in/out Optional 16 logic timing channels (MSO)

8 08 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Performance Characteristics Scope input Channels Bandwidth ( 3 db) 1 Maximum input Full Scale range 2 Input impedance Coupling Offset range Connector BW limit Noise peak-to-peak Ch 1, 2, 3 and 4 simultaneous acquisition DSO6014L: DC to 100 MHz DSO6054L: DC to 500 MHz DSO6104L: DC to 1 GHz CAT I 300 Vrms, 400 Vpk, CAT II 100 Vrms, 400 Vpk With 10073C/10074C 10:1 probe: CAT I 500 Vpk, CAT II 400 Vpk 5 Vrms with 50 Ω input DSO6014L: 1 mv/div to 5 V/div (1 MΩ) DSO6054L: 2 mv/div to 5 V/div (1 MΩ or 50 Ω) DSO6104L: 2 mv/div to 5 V/div (1 MΩ), 2 mv/div to 1 V/div (50 Ω) DSO6014L 3 : 1 MΩ ± 1% 11pF DSO6054L/6104L: 1 MΩ ± 1% 14pF or 50 Ω ± 1.5%, selectable AC, DC ± 5 V on ranges < 10 mv/div ± 25 V on ranges 10 mv/div to 200 mv/div ± 75 V on ranges 200 mv/div BNC DSO6014L: 20MHz DSO6054L/6104L: 25 MHz selectable DSO6014L: 3% full scale or 2 mv, whichever is greater DSO6054L: 3% full scale or 3.6 mv, whichever is greater DSO6104L: 3% full scale or 4.5 mv, whichever is greater DC Vertical Logic channels (with MSO option) Number of channels 16 logic timing channels labeled D15 - D0 Maximum input frequency 250 MHz Sample rate 2 GSa/sec one pod 4, 1 GSa/sec each pod Memory depth 1 pod /both pod Standard memory 8 Mpts/4 Mpts Vertical resolution 1 bit Threshold selections TTL, CMOS, ECL, user-definable (selectable by pod) Maximum input voltage ± 40 V peak CAT I Glitch detection 2 ns (min pulse width) 1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 C from firmware calibration temperature mv/div is a magnification of 2 mv/div. 2 mv/div is a magnification of 4 mv/div setting. For vertical accuracy calculations, use full scale of 16 mv for 1 mv/div sensitivity setting and 32 mv for 2 mv/div sensitivity setting. 3. Four 50 Ω termination adapters are supplied with DSO6014L. 4. A pod is a group of 8 digital channels. either 0-8 or 9-16.

9 09 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Performance characteristics (continued) Analog to digital conversion Vertical resolution 8 bits Sample rate DSO6014L: 2 GSa/sec DSO6054L/6104L: 4 GSa/sec half channel, 2 GSa/sec each channel Equivalent-time sample rate: 400 GSa/s (when realtime mode is turned off) Memory depth 2 channels/4 channels Standard 8 Mpts/4 Mpts Time range 5 nsec/div to 50 sec/div (DSO6014L) 1 nsec/div to 50 sec/div (DSO6054L) 500 psec/div to 50 sec/div (DSO6104L) Acquisition Acquisition mode Normal, Peak Detect, Averaging, High Resolution Peak detection DSO6014L: 1 nsec peak detect DSO6054L/6104L: 250 psec peak detect Averaging Selectable from 2, 4, 8, 16, 32, 64 to High resolution mode Time base Bits of resolution < 100 nsec/div nsec/div 9 2 µsec/div µsec/div µsec/div 12 Filter Sinx/x interpolation Trigger system Sources DSO6xx4L: Ch 1, 2, 3, 4, line, ext and D0 - D15 for MSO enabled DSO Modes Auto, Normal, Single Holdoff time range ~60 ns to 10 seconds Trigger jitter 15 psec rms Selections Edge, pulse width, pattern, TV, duration, sequence, CAN, LIN, USB, I 2 C, SPI, Nth edge burst Scope channel triggering Range (internal) ± 6 div from center screen ± 6 div from center screen Sensitivity 1 < 10 mv/div: greater of 1 div or 5 mv 10 mv/div: 0.6 div Coupling AC (~10 Hz), DC, noise reject, HF reject and LF reject (~ 50 khz) 1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 10 C from firmware calibration temperature.

10 10 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Performance Characteristics (Continued) Logic (D15 - D0) channel triggering (with MSO option) Threshold range (user defined) ± 8.0 V in 10 mv increments Threshold accuracy 1 ± (100 mv + 3% of threshold setting) Predefined thresholds TTL = 1.4 V, CMOS = 2.5 V, ECL = 1.3 V External (EXT) triggering Input resistance kω ± 5% (DSO6014L) 2.14 kω ± 5% (DSO6054L/6104L) Maximum input ± 15 V Range ± 5 V Sensitivity DC to 100 MHz: 500 mv (DSO6014L) DC to 500 MHz: 500 mv (DSO6054L/6104L) Coupling AC (~ 3.5 Hz), DC, noise reject, HF reject and LF reject (~ 50 khz) Probe ID Auto probe sense (DSO6014L) Auto probe sense and AutoProbe interface (DSO6054L/6104L) Measurement features Automatic measurements Measurements are continuously updated. Cursors track last selected measurement Voltage (scope channels only) Peak-to-peak, maximum, minimum, average, amplitude, top, base, overshoot, preshoot, RMS, standard deviation (AC RMS) Time Frequency, period, + width, width and duty cycle on any channels Rise time, fall time, X at max Y (time at max volts), X at min Y (time at min volts), delay, and phase on scope channels only Counter Built-in 5-digit frequency counter on any scope channel. Counts up to the scope s bandwidth (1 GHz max). The counter resolution can be increased to 8 digits with an external 10 MHz reference. Threshold definition Variable by percent and absolute value; 10%, 50%, 90% default for time measurements Cursors Manually or automatically placed readout of horizontal (X, X, 1/ X) and vertical (Y, Y). Tracking cursors provide an additional mode for cursor positioning beyond the current manual method. When cursor tracking is enabled, changing a cursor's x-axis position results in the y-axis cursor tracking the corresponding y-axis (voltage, current, etc.) value. Additionally logic or scope channels can be displayed as binary or hex values. Waveform math f (g(t)) g(t): { 1, 2, 3, 4, 1-2, 1+2, 1x2, 3-4, 3+4, 3x4} f(t): { 1-2, 1+2, 1x2, 3-4, 3+4, 3x4, FFT(g(t)), differentiate d/dt g(t), integrate g(t) dt, square root g(t) } Where 1,2,3,4 represent analog input channels 1, 2, 3, and 4 Note: Channels 3 and 4 only available on DSO6xx4L models Measurement statistics Statistical data for enabled measurements such as mean, min, max, standard deviation and count. 1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 10 C from firmware calibration temperature.

11 11 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Performance Characteristics (Continued) FFT Points Source of FFT Window Noise floor Amplitude Frequency resolution Maximum frequency Storage Save/recall (non-volatile) Storage type and format I/O Standard ports Max transfer rate Remote front panel Built-in help Throughput of scope channels Resolution of video output Waveform controls General characteristics Rack mounting Physical size Weight Probe comp output Fixed at 1000 points Scope channels 1, 2, 3 or 4, 1+2, 1-2, 1x2 Rectangular, flattop, Hanning 50 to 90 db depending on averaging Display in dbv, dbm at 50 Ω 0.05/(time per div) 50/(time per div) 10 setups and traces can be saved and recalled internally. Secure environment mode (-SEC) ensures setups and traces are stored to volatile memory. USB 1.1 drive on front (/drive0) and rear (/drive5) panels Image formats: BMP (8 bit), BMP (24 bit) and PNG (24 bit) Data formats: X and Y (time/voltage) values in CSV, ASCII XY and binary format Trace/setup formats: Recalled USB 2.0 high speed, 10/100-BaseT LAN, IEEE488.2 GPIB, XGA video output IEEE488.2 GPIB: 500 kbytes/sec USB (USBTMC-USB488): 3.5 Mbytes/sec 100 Mbps LAN (TCP/IP): 1 Mbytes/sec language support for English, German, French, Russian, Japanese, Traditional Chinese, Simplified Chines, Korean, Spanish, Portuguese and Italian 100,000 waveforms/sec in real-time mode to remote monitor XGA Waveform intensity of 256 levels, vectors on/off, infinite persistence on/off Supplied with all necessary hardware (except tools) for installation into a standard EIA 19-inch rack 43.5 cm W x 27 cm D x 4.2 cm H (without brackets) Net: 2.45 kg (5.4 lbs.) Shipping: 6.2 kg (13.6 lbs.) Frequency ~1.2 khz Amplitude ~2.5 V

12 12 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Performance Characteristics (Continued) General characteristics Trigger out When triggers is selected (delay ~17 ns) 0 to 5 V into high impedance 0 to 2.5 V into 50 Ω When source frequency or 0 to 580 mv into high impedance source frequency/8 is selected 0 to 2.5 V into 50 Ω Max frequency output 350 MHz (in source frequency mode when terminated in 50 Ω) 125 MHz (in source frequency/8 mode when terminated in 50 Ω) 10 MHz ref in/out TTL out, 180 mv to 1 V amplitude within 0 to 2 V offset Power requirements Line voltage range 100 to 240 V, 50/60 Hz auto ranging Line frequency 50/60 Hz Power usage 80 W max Environmental characteristics Ambient temperature Operating 10 C to +50 C; non-operating 40 C to +70 C Humidity Operating 95% RH at 40 C for 24 hours; non-operating 90% RH at 65 C for 24 hours Altitude Operating to 4,570 m (15,000 ft); non-operating to 15,244 m (50,000 ft) Vibration Keysight class GP and MIL-PRF-28800F; Class 3 random Shock axis Keysight class GP and MIL-PRF-28800F; (Operating 30 g, 1/2 sine, 11-ms duration, 3 shocks/axis along major. Total of 18 shocks) Pollution degree Normally only dry non-conductive pollution occurs. Occasionally a temporary conductivity caused by condensation must be expected. Indoor use This instrument is rated for indoor use only Other Installation categories CAT I EMC IEC :1997, EN :1997 Safety IEC :2001, EN :2001 Canada: CSA-C22.2 No :1992 UL :2003 Supplementary information The product herewith complies with the requirements of the low voltage directive 73/23/EEC and the EMC directive 89/336/EEC, and carries the CE-marking accordingly.

13 13 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Ordering Information Model number DSO6104L DSO6054L DSO6014L Description 1 GHz 4-ch DSO 500 MHz 4-ch DSO 100 MHz 4-ch DSO Accessories included: Model number DSO6104L/6054L DSO6014L User s guide, service guide, programmer s guide Power cord 10:1 divider passive probe per scope channel Keysight IO Libraries Suite 14.2 Standard 3 year warranty GPIB extender 50 Ω termination adapter Crossover LAN cable Rack mount hardware Available options Option number Description DSO6014L DSO6054L/6104L N2914A 1 MSO upgrade kit N2915A 1 MSO upgrade kit N5427A(-SEC) Secure environment mode N5423A(-LSS) I 2 C/SPI triggering and decode option N5424A(-AMS) CAN/LIN triggering and decode option N5454A(-SGM) Segmented memory application N5457A (-232) RS-232/UART triggering and decode N5468A I 2 S triggering and decode option N5455A Mask testing- limit 1. Includes a logic cable kit, a label and an upgrade key code to activate the MSO features.

14 14 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Ordering Information (Continued) Warranty and calibration options All models include a standard 1-year warranty. Contact local sales office for prices of extended options: Passive probes Product number 10070C 10074C 10073C Description 1:1 passive probe with ID 10:1 150 MHz passive probe with ID (shipped standard with DSO6014L model) 10:1 500 MHz passive probe with ID (shipped standard with DSO6054L/6104L models) Current probes Product number 1146A 1147B N2780A N2781A N2782A N2783A N2779A Description 100-kHz current probe, AC/DC 50-MHz/15A current probe, ac/dc with AutoProbe interface (power supply not required) 2 MHz/500A current probe, AC/DC 10 MHz/150A current probe, AC/DC 50 MHz/30A current probe, AC/DC 100 MHz/30A current probe, AC/DC Power supply for N278xA current probes High-voltage probes Product number 10076A N2771A Description 100:1, 4 kv, 250-MHz probe with ID 1000:1, 15 kv, 50-MHz high-voltage probe Logic probes Product number Description :16 logic cable and terminator :2 x 8 logic input probe assembly Active single-ended probes Product number 1144A 1145A 1142A 1156A Description 800-MHz active probe 2-channel 750-MHz active probe Power supply for 1144A and 1145A 1.5-GHz active probe with AutoProbe interface (power supply not required) Active differential probes Product number N2791A 1130A Description 25 MHz differential probe 1.5 GHz InfiniiMax differential probe amplifier with AutoProbe interface (Order one or more InfiniiMax probe heads or connectivity kits per amplifier.)

15 15 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Related Literature Publication title Publication number InfiniiVision Oscilloscope Probes and Accessories - Selection Guide EN 6000 Series Oscilloscopes - Data Sheet EN Open the Door to Simpler System Creation - Brochure EN LXI: Going Beyond GPIB, PXI and VXI: Application Note EN Optimizing Test Systems for Highest Throughput, Lowest Cost and Ease of EN Integration with LXI Instruments - Application Note InfiniiVision Series Oscilloscope Secure Environment Mode Option - Data Sheet EN Segmented Memory Acquisition for InfiniiVision Series Oscilloscopes - Data Sheet EN I 2 S Triggering and Hardware-based Decode (Option SND) for Keysight InfiniiVision EN Oscilloscopes - Data Sheet Keysight Oscilloscopes Multiple form factors from 20 MHz to > 90 GHz Industry leading specs Powerful applications

16 16 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet AdvancedTCA Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. Keysight is a founding member of the AXIe consortium. ATCA, AdvancedTCA, and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group. LAN extensions for Instruments puts the power of Ethernet and the Web inside your test systems. Keysight is a founding member of the LXI consortium. PCI extensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system.

17 17 Keysight InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet From Hewlett-Packard through Agilent to Keysight For more than 75 years, we ve been helping you unlock measurement insights. Our unique combination of hardware, software and people can help you reach your next breakthrough. Unlocking measurement insights since For more information on Keysight Technologies products, applications or services, please contact your local Keysight office. The complete list is available at: Americas Canada (877) Brazil Mexico United States (800) THE FUTURE mykeysight A personalized view into the information most relevant to you. Three-Year Warranty Keysight s committed to superior product quality and lower total cost of ownership. Keysight is the only test and measurement company with three-year warranty standard on all instruments, worldwide. And, we provide a full one-year warranty on all accessories, calibration devices, systems and custom products. Keysight Assurance Plans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Infoline Keysight s insight to best in class information management. Free access to your Keysight equipment company reports and e-library. Keysight Channel Partners Get the best of both worlds: Keysight s measurement expertise and product breadth, combined with channel partner convenience. Asia Pacific Australia China Hong Kong India Japan 0120 (421) 345 Korea Malaysia Singapore Taiwan Other AP Countries (65) Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom For other unlisted countries: (BP ) Keysight Technologies, Inc. DEKRA Certified ISO 9001:2008 Quality Management System This information is subject to change without notice. Keysight Technologies, Published in USA, November 25, EN