GREENTEL R200 series M2M Industrial Cellular Router for GPRS/HSUPA networks

Transcription

1 GREENTEL R200 series M2M Industrial Cellular Router for GPRS/HSUPA networks GREENTEL R200 series is Machine-to-machine (M2M) industrial cellular router with Din-rail mounting, which works on 2G/3G cellular networks, provides reliable and robust wireless connections. GREENTEL R200 series is specified for industrial M2M usage. Designed to endure extreme conditions, such as temperatures ranging from -25 C to +70 C and low power consumption. GREENTEL R200 series also supports the PPTP, L2TP, GPE, IPSec VPN tunnel providing high-grade network security.

2 Features: Highly Reliable Performance High performance platform, 200 MIPS ARM9, 8 Mbytes NORFlash, 16 Mbytes SDRAM Software and hardware watchdog Always online: PPP LCP echo and ICMP keep alive for link inspection Dial on demand activated by Call/SMS/Local data flow High sensitivity: low signal strength required (CSQ>12) Remote and local firmware upgrade based on redundant firmware backup Large scale remote management via Greentel Device Manager Ease to Use Embedded Linux system, TCP/IP and PPP stack, Plug and Play Configuration via WEB, TELNET, Hyper Terminal and SSH Backup and restore settings Reset button, software and hardware reset to factory default settings LED indicators for three level cellular network signal strength LED indicators for Power, Status, Warn, Error, Modem Security VPN IPSec: DES, 3DES, AES, MD5 and SHA-1 Authentication: Pre-shared key, digital certificate Support PPTP, L2TP, GRE tunnels Firewall: Stateful Packet Inspection(SPI), filtering multicast, filtering PING packet, preventing DoS attack, different firewall strategies Access control: Access control of TCP, UDP, ICMP packet MAC and IP filter, MAC address bundling DMZ: support virtual servers VRRP: Hot backup, auto switch to slave router when master router failed Robust design for Industrial Application Rugged casing with DIN-rail mounting and wall mounting Inside SIM card slot, provides SIM card anti-steal Industrial power terminal block, 9 to 48VDC wide range voltage power supply, anti-rce (reverse connection error), over-current protection One Ethernet port, one RS232 for debug console, one RS232 or RS485 optional Support DTU mode, data transparent transmission via serial port Support Modbus RTU/TCP via RS485 (Optional) Wide range operation temperature: -25 C to 70 C Operation humidity: 5% to 95%, non-condensing IP30 grade protection Optimized EMC design

3 Applications: Machine-to-machine (M2M) Telemetry SCADA Monitoring and Surveillance DSL/Cable Infrastructure Backup AVL Credit card verifications, POS and ATM Product Kit: M2M Industrial Cellular Router AC/DC Adapter Rubber antenna and magnetic mount antenna optional DIN-rail optional RS232 to RS485 converter optional Ethernet Cable RJ45 Debug console cable RJ45-RS232 optional CD Mechanism

4 Specifications: GPRS (R200G) HSUPA (R200H) USB (R200U) Cellular APN Authentication Protocol Dial On Demand Always online High Sensitivity GSM/GPRS 900/1800 MHz Dual Band or 850/900/1800/1900 MHz Quad Band optional, GPRS Class 10, DL/UL 85.6/21.4 Kbps or 64.2/42.8 Kbps UMTS 850/900/1900/2100 MHz Quad Band, GSM/GPRS 850/900/1800/1900 MHz Quad Band, DL/UL 7.2/2.0 Mbps USB 2.0 host port x1, without embedded cellular module, connects to external 3G USB Modem Remark: Please refer to "3G Modem Support List" to make sure your wireless modem is supported by R200U APN and VPDN CHAP/PAP/MS-CHAP/MS-CHAP2/etc. Activated by Call/SMS/Local data flow PPP LCP echo and ICMP keep alive for link inspection low signal strength required (CSQ>12) Ethernet Interface Isolation Protection one 10M/100Mbase-T RJ45, auto MDI/MDI-X 1.5 kv between signals and Gnd Serial Ports Port Interface Rate Communication Parameters Flow Control Isolation Protection 3-Lined RS232 Serial Port X 1 (Optional 3-Lined Debug Console 3-Lined RS232/485 Serial Port X 1 with RS485) Serial Port (Optional with X 1 RS232) screw pluggable screw pluggable terminal block, RJ45 terminal block, pitch=5mm pitch=5mm 1200bit/s to bit/s Parity: None, Even, Odd, Space, Mark; Data Bits: 5,6,7,8; Stop Bits:1,1.5,2 None 1.5 kv between signals and Gnd USB (R200U) Port Interface USB 2.0 Host port, Female Type-A System Management Configuration WEB, TELNET, Hyper Terminal and SSH

5 Upgrade Management Remote and local firmware upgrade based on redundant firmware backup Self developed large scale management system Features Routing Multi-Protocol Support Connection Inspection NAT and PAT DDNS VRRP Static routing ICMP, IP, TCP, UDP, DHCP, PPP, ARP, Telnet, DNS, SSH, VRRP, HTTP, HTTPS, NTP PPP LCP echo and ICMP keep alive for link inspection Address Translation (NAT) and Port Address Translation (PAT), hiding internal IP addresses and expand IP address space. Support Dynamic DNS Hot backup, auto switch to slave router when master router failed Security VPN IPSec Tunnel (Maximum 4 tunnels) Authentication Method PPTP, L2TP, GRE Firewall Strategy MAC Address Bundling Port Mapping Access Control Traffic Control DMZ Support standard IPSec based VPN service, encryption methods including DES, 3DES, AES, data verification methods including MD5 and SHA-1 Pre-shared key, digital certificate Client Stateful Packet Inspection(SPI), filtering multicast, filtering PING packet, preventing DoS attack, different firewall strategies Refuse illegal host access Allow extranet user to access specific intranet port Flexible access control of TCP, UDP, ICMP packet Downlink and Uplink speed control Support virtual servers Embedded Advanced Functions Beep Real-time Clock Configurable alarm output Provide the system with accurate local time

6 Watchdog Signal Strength LED Running Status LED With both software and hardware watchdog, insure system against dead-halt 3-level LED indication of cellular network signal strength 4 Running Status LEDs: POWER, STATUS, WARN, ERROR Power Supply Power Input Power Consumption Burst Protection Surge Protection Connector 9 to 48VDC, anti-rce (reverse connection error), over-current protection Communication: 12V(max) Idle: 12V(max) 4KV 2KV screw pluggable terminal block, pitch=5mm Mechanical Features Outer casing Dimensions Weight Installation Method SIM Card Protection 1mm aluminum sheet 46mm x 100mm x 110mm 490g DIN-rail mounting/wall mounting Inside SIM card slot, provides SIM card anti-steal Operation Environment Operation Temperature -25 C to 70 C Storage Temperature -40 C to 85 C Humidity 5% to 95%, non-condensing Protection Level IP30 Certification Safety Insulation Resistance Electric Strength Anti-shock Drop Vibration DC500V imposed on communication lines to ground and on power lines to ground, resistance >500MΩ DC500V imposed on communication circuit to ground and on power lines to ground, leakage current 0MA IEC IEC IEC

7 EMC ESD Surge Electric Fast Transient/burst RF Electromagnetic Field Immunity RF conducted interference Damped oscillation Immunity Power-frequency electromagnetic fields Immunity Meet EN , Electrostatic discharge: Level 4, ±8KV to all communication ports; Air discharge: Level 4, ±15KV to all parts of outer casing Meet EN , Level 3, between each group of lines and chassis ground, differential-mode ±1KV peak, common-mode ±2KV peak, 1.2/50us; not applicable to serial ports Meet EN , power terminal, Level 4, ±4KV peak, repetition rate 5KHz; data terminal, Level 4, ±2KV peak, repetition rate 5KHz Meet EN , frequency range: 80MHZ to 1000MHz, Level 3, 10V/m Meet EN , frequency range: 150KHz to 80MHz, Level 3 Meet EN , 1MHz power lines differential-mode ±1KV; 1MHz power lines, common-mode ±2.5KV Meet EN , horizontal/vertical 400A/m Ordering Information: R201GC Code No. of Cellular Cellular Module Serial Definition Security Manufacturer Port Interfaces 0: 1: One G: GPRS C55: Cinterion 232: without Ethernet H: HSUPA MC55i, GSM RS232 VPN interface U: with USB 850/900/1800/1900 serial 1: VPN 4: Four host port, Mhz Quad Band port support Ethernet without C37: Cinterion 485:

8 ports (One embedded MC37i, GSM RS485 WAN, two module 900/1800 Mhz Dual serial LAN and one Band with country port DMZ) limitation H: Huawei EM770, HSUPA 850/1900/2100 Mhz Tri Band HW: Huawei EM770W, HSUPA 850/900/1900/2100 Mhz Quad Band U: w/o module, with USB host port Model List GPRS HSUPA USB Models R201GC R201HH-232 R201UU-232 R201GC R201HH-485 R201UU-485 R211GC R211HH-232 R211UU-232 R211GC R211HH-485 R211UU-485 R204GC R204HH-232 R204UU-232 R204GC R204HH-485 R204UU-485 R214GC R214HH-232 R214UU-232 R214GC R214HH-485 R214UU-485 R201GC R201HHW-232 R201GC R201HHW-485 R211GC R211HHW-232 R211GC R211HHW-485 R204GC R204HHW-232 R204GC R204HHW-485 R214GC R214HHW-232 R214GC R214HHW-485 Device Manager for large scale remote management: Remote Configuration: configure your devices remotely; Mass Upgrade: realize auto remote upgrade and auto mass remote upgrade of devices; manage router s Firmware version; Large Quantity of Access Points: can manage more than 800 access points of routers, and can expand through upgrading or extension; High Practicality: adaptable to network of any structure - Internet, VPDN, wireless DDN, and other private networks; B/S Structure: no need of special software or configurations on client-end and can just

9 monitor routers anywhere anytime; Multi-Level User Authority Management: secure system and devices; GIS-Based Status Monitoring: support GPS, provide vector map location management; Online Status Real-time Monitoring: online, offline, alert; Alert: support local interface alert, SMS and alert; Historical Data Inquiry: inquire and get on/offline status of designated devices; Connection Statistics Report: provide connection statistics for analyzing connection status; Extended Service Monitoring: By upgrading router, implement monitoring of devices (PLC, controller, intelligent equipment, PC, etc.) that are connected to routers; Remark: This software is not default kit for R200 series router. For detail information please contact us. GREENTEL LTD. Address: Green Building, 11 Daling Rd, Huizhou City, China WEB: Copyright Greentel Ltd All rights reserved. Subject to alterations without notice.