TG VR Gimbal User Manual V Accsoon. All Rights Reserved.
|
|
- Maximilian Norman
- 5 years ago
- Views:
Transcription
1 TG VR Gimbal User Manual V
2 Disclaimers and Warnings Congratulations on purchasing you new VR Gimbal. Please read this manual and disclaimer carefully before using this product. By using this product, you hereby agree to this disclaimer and signify that you have read it in full. You agree that you are responsible for your own conduct and any content created while using this product, and for purposes that are proper and in accordance with local regulations, terms and any applicable polices and guidelines. Do not modify or adjust the TG20. The TG20 has been calibrated before it leaves the factory. No modification or amending to the TG20 is allowed. Please download the corresponding software. As Accsoon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. Accsoon assumes no liability for damage or injuries incurred directly or indirectly from use of this product. for any resulting liability Any questions when you using this product, please contact local distributor or Accsoon. 1
3 Contents Introduction... 4 In the Box... 6 Camera Mount... 8 GoPro Mount /6/9/10 GoPro Combinations... 9 Mounting the Gimbal to the Aircraft Mounting the Extension Rod Mounting the Damper Plate Mounting the Gimbal to the Aircraft The Gimbal Safe Distance GCU Wiring Operation Mode Pre-Flight Check Flight Test Generate GoPro Synchronization Signal PC Assistant Tuning Installation and Usage Connect the Gimbal to the PC Assistant PC Assistant Menu IMU Live Data Parameters
4 Working Mode Calibration Motor Switch Firmware Upgrade Troubleshooting Specification
5 Introduction The TG20 is a multi-function stabilizer for 360 video shooting, based on our years of stabilizer development experience, is the most advanced 360 video shooting stabilization platform to date. The technology built into the TG20 allows the user easily use and bring world-class movement translation and stability to the professional cinematographer's market. TG20 comes with an independent high performance IMU module, no need work with other controllers, so it can be use on any multi-rotors drones cars or other platforms. High performance motor servo systems with position feedback and IMU to communicate with our custom 32-bit processor, which processes movement calculations in seconds, this equates to control and stability accuracy down to 0.01 degrees of translated movements, meaning your images are going to be perfectly stable in all three axes of movement. A GoPro power supply system built into TG20, it can be power 10 GoPro simultaneously, so the customer no need worry about Gopro shooting time. A buzzer can be generate sound synchronization signal for video post-processing also comes with the TG20. Working Modes Pan Lock mode Pan Follow Mode Gimbal Direction Always point to the initial Track the drone or joystick 4
6 position direction Receiver Control 3 axis controllable Pan axis uncontrollable, Roll&Tilt axis controllable Thumb controller The speed increases with the The speed increases with the linear control distance between the thumb distance between the thumb controller and the original controller and the original point point 5
7 In the Box Gimbal 1 1. Built-In GCU Controller 2. High performance Motor Servo System 3. High accuracy IMU Angles Stabilization System 4. GoPro Power Supply System GOPRO Camera Holder 1. GOPRO 4 Camera Holder GOPRO 5 Camera Holder 10 Vibration Damper Plate 1. Vibration Damper Frame 2 2. Vibration Damper Ball M3 8mm Flat-head Inner Hexagon Screw 8 Vibration Damper Plate Tube Clamp 1. Tube Clamp 4 2. M2.5 16mm Conical Countersunk Screw 8 Screw Package 1 6
8 Extension Rod 2 Safety Cable 1 Servo Cable Package 1 1. Servo Cable 6 USB Cable 1 7
9 Camera Mount GoPro Mount Put the hexagon screws through the camera holders to fix the GoPro on the camera plates. NOTE: When mounting GoPro Hero 4, use M3 25mm screws; When mounting GoPro Hero 5, use M3 30mm screws. For convenience of changing batteries and CF memory card, please make sure to install GoPro Hero 5 cameras staggering up and down to prevent battery compartment blocked. 8
10 1 or 2pcs GoPro can be mounted on the bottom. When mounting two GoPro, make sure two Gopro are installed back to front to keep gravity balance. 5/6/9/10 GoPro Combinations (a) 5 GoPro Combination 9
11 (b) 6 GoPro Combination (c) 9 GoPro Combination 10
12 (d) 10 GoPro Combination When mounting 5 or 6pcs GoPro, make sure the GoPro display screen are up and lens down as the below pictures to keep gravity balance. 11
13 Mounting the Gimbal to the Aircraft Mounting the Extension Rod Mounting the extension rod to the gimbal with the M3 12mm screws, fix the screws tightly to prevent from loosening or dropping. According to the specific use, one or two extension rod can be used. When the diagonal size of the aircraft is within 850mm(including propeller size), one extension rod is ok for use. When the diagonal dimension of the aircraft is above 1140mm, two extension rods needed. Mounting the Damper Plate Mounting the damper plate to the another end of the extension rod with the M3 12mm screws, fix the screws tightly to prevent from loosening or dropping. 12
14 After completing the above steps, the gimbal assembly is complete. (a) One extension rod (b) Two extension rods Mounting the Gimbal to the Aircraft Use tube clamp to attach loading tube with aircraft tightly. The space between two loading tube is 155mm. 13
15 Instead of using loading tube, use damper plate to attach to DJI S900/S1000/M600 directly. 14
16 The Gimbal Safe Distance The following figure takes the GoPro 4 as an example. The GoPro settings is: the viewing angle is widest which is about 170 degrees, video aspect ratio is 4:3, recording format is 30fps 2.7K or 60fps 1080p. When there are 8 GoPro vertically mount onto the gimbal and the wide viewing angle is in 4:3 mode, the minimum vertical safety distance is 30cm, the viewing overlapping ratio of cameras is about 60%. 15
17 When there are 4 GoPro vertically mount onto the gimbal and the wide viewing angle is in 4:3 mode, the minimum vertical safety distance is 45cm, the viewing overlapping ratio of cameras is about 10%. When there are 2 GoPro mount onto the gimbal bottom and the wide viewing angle is in 4:3 mode, the minimum bottom safety distance is 18cm,the viewing overlapping ratio of cameras is about 50%. 16
18 GCU Wiring Port Function RC Channel S.BUS Support Futaba S.BUS protocol Related to S.BUS channel ROLL Control the gimbal roll axis Related to channel 1 (AILE) TILT Control the gimbal tilt axis Related to channel 2 (ELEV) PAN Control the gimbal pan axis Related to channel 4 (RUDD) MODE Control the gimbal working mode Related to channel 5 (3 -position switch) SPEED The gimbal rotational speed control Related to channel 6 (3 -position switch) ZOOM Reserved Reserved AV-OUT The DJI 3.5 headphone cable can be DO NOT CONNECT 17
19 directly connected to DJI's OSD system 3.5mm JACK TO to monitor the screen. POWER SOURCE! 3.5MM headphone cable respectively has 4 colors: red is S-VIDEO output and black is GND ground output. Port Function USB Link to PC for testing and upgrade 4Pin Serial Reserved Port 18
20 Operation Mode The TG20 support two operation mode: underslung mode and upright mode, user may mount the gimbal on aircrafts, cars, helmets etc. (a) Underslung Mode (b) Upright Mode There is no need special setting lets the gimbal work in one of the two modes, just mount the gimbal as you needed and then power on it. 19
21 Pre-Flight Check Ensure the gimbal is properly installed and attached to the aircraft, and that the camera is mounted correctly and securely. Before powering on, spin the gimbal through its complete rotation by hand on each axis to ensure nothing blocking its movement. Ensure all cables are connected correctly, without any plugged in backwards or into the wrong ports. Verify RC settings and a proper connection between the GCU and the RC receiver. Ensure the gimbal has been upgraded to the latest firmware. Make sure that the gimbal is at horizontal resting before starting. 20
22 Flight Test 1. Make sure all connections and wiring are in good condition. 2.Make sure that the gimbal is at horizontal resting and stable when power-on. 3.After the power is on, the gimbal LED will be green. After 5 seconds, the gimbal will start automatically, keep horizontal and move to the same direction as the front of the aircraft. 4.When the gimbal is stationary, it means the initialization is complete and the gimbal ready to use. 5.Turn on the remote controller ONLY after the gimbal initialized. 6.Toggle the assigned Wroking Modes switch on your TX and make sure it is work properly. 7.If there is any abnormality after initialization, please refer to the Troubleshooting section. 21
23 Generate GoPro Synchronization Signal After power on the GoPro Power Supply System, push the button, the buzzer will generate "Be sound and can be used as synchronization signal for video post-processing. 22
24 PC Assistant Tuning Installation and Usage 1. Download the Assistant installer from 2. Double click the Assistant installer and follow the steps to finish the installation. 3. Run Assistant. 4. Upgrade the firmware or configure parameters using Assistant as needed. The assistant installer can be used on Window XP, Win7, and Win10. Connect the Gimbal to the PC Assistant 23
25 Please connect the gimbal and PC with a USB cable and then click "Refresh" button, when the new COM port comes out, choose the right COM port, click "Connect". After success connection the COM port will turn to grey and the status will display "ReadOK" with a green background which means all settings read out from the gimbal, also the Firmware revision info displayed. PC Assistant Menu Default Settings: Reset all the settings to the factory settings. Read Settings: Read the settings saved in the gimbal. Write Settings: After change parameters, the gimbal will not save your settings unless you write the configuration changes. Restart: Restart the gimbal. IMU Live Data The IMU angles data and real time output chart. Parameters The parameters controls the behavior of the gimbal. Power: This parameter will determine how powerful the gimbal will be in holding the camera still. Slowly increase this setting until you feel an oscillation, then reduce the setting until the oscillation subsides. It is important to check that the setting you have set will not oscillate in any 24
26 orientation. Speed: This parameter will determine how quickly the gimbal back to the original position when it is not there due to any external force. Slowly increase this setting meanwhile drag the axis to make it return to the original position, until the gimbal back to the original position quickly and without any vibration. Trim: This parameter offers accuracy compensation when the gimbal is working in dynamic, such as frequent vibrating in all direction or moving. When the value is too high the gimbal will oscillate, then the value should be decreased properly. NOTE: Firstly adjust the power value, then the speed value and finally the trim value. Follow Deadband: Flollow deadband defines a range in degrees of handle or aircraft movement which will be ignored. In practice, this means that you can move the handle less than the deadband and the camera will not pan. Once you exceed the pan follow deadband threshold, the camera will begin to pan. Follow Speed: This parameter means how fast the gimbal follow the aircraft or handle movements. Working Mode Pan Follow: The gimbal pan axis always tracks the aircraft or handle orientation, which means when the aircraft or the handle rotated left or right, 25
27 the camera will move, smoothly following the aircraft or the handle rotation, and stop at the appropriate angle. Pan Lock: All three axes are in self-stabilized and the direction is locked. Calibration Gyro Cali: When you want to perform gyro calibration, click "Motor Off" button and the gimbal will standby, then you keep the gimbal stationary without any movement or vibration and click "Gyro Cali" button. The calibration will complete in 10 seconds. NOTE: Before doing calibration, please ensure that the temperature shows "NORMAL". Pan ORNT Cali: You can change the pan axis original orientation by use the "Pan ORNT Cali". Lets the gimbal in standby by click "standby" button, then drag the pan axis to the orientation you wanted and then click "Pan ORNT Cali", the gimbal will save new orientation. Motor Switch Motor Off: Click this button turn the motor off, the gimbal will go to standby. NOTE: All calibrations can only be performed after the motor is turned off. Motor On: Click this button turn the motor on and the gimbal will hold the camera stable. 26
28 Firmware Upgrade You can upgrade the firmware by following the steps bellow: 1. Download the firmware from 2. Click "Browse", find the firmware and open it. 3. Click "Upgrade". 4. Waiting for the Upgrade complete. NOTE: The previous parameters will not change after upgrading. 27
29 Troubleshooting NO. The Problem The Cause What to DO 1 The gimbal keeps (1)The TX trims are too (1)Adjust the TX trims drifting after high (2)Wait for 1 to 2 minutes to initialization. (2)The ambient make the IMU warm temperature is too low 2 Some axis can not (1)The default (1) Do gyro calibration by keep horizontal after calibration is wrong PC Assistant software or do initialization (2)There is drift in gyro an offline gyro calibration by RC (2)Please contact Accsoon customer Service if it still cannot keep horizontal or it moves irregularly after initialization 3 The gimbal cannot (1)The IMU wram up (1)Warm the gimbal for 2 to keep horizontal after time isn't enough 3 minutes and wait until it initial power on if the goes almost horizontally, ambient temperature then quickly power off the is lower than 10 gimbal and power on it degree again 28
30 Specification General Built-in Double IMU System Function High performance motor servo systems High performance 32-bit processor Model receiver and S.BUS signal input Molex USB2.0 input port IMU temperature drift compensation algorithm, ensuring a long time stable performance Over current protection Supported GoPro Hero 4, GoPro Hero 5, 5/6/9/10 GoPro Combinations Camera Safety The video cannot be stitched if the safety distance is lower than Distance the ones as follows: The horizontal safety distance is 50cm and vertical 100cm if it is working with 5 GoPro cameras The horizontal safety distance is 50 cm and vertical 70 cm if it is working with 6 GoPro cameras The horizontal safety distance is 30 cm and vertical 50 cm if it is working with 9 GoPro cameras The horizontal safety distance is 30 cm and vertical 30 cm if it is 29
31 working with 10 GoPro cameras NOTE: The GoPro settings above is 170 degree wide angle in 4:3 mode. GCU Input 3S~6S LiPo Power GoPro Power 3S~4S LiPo Supply System Input Control At least 2 spare receiver channels Requirement Assistant Window XP; Windows 7; Windows 10 Software System Requirements Mechanical & Electrical Characteristics Working Static working current: 200mA(@16V) Current Dynamic working current: 400mA(@16V) Stall motor current: 3A(@16V) Operating -10 C~45 C Temperature Weight Totally 1.1kg (including damper plate and extension rod) 30
32 Maximum 2kg with proper gravity balance (Maximum load of steel Loading damper is 3kg) NOTE: The specialized red safety string must be used to prevent the gimbal drop from aircraft. Working Performance Control Angle ±0.01 Accuracy Maximum No more than 15m/s Flight Speed Maximum Roll Axis: ±30 Rotation Tilt Axis: ±30 Angle Pan Axis:Unlimited Maximum Pan Axis: 100 /sec Control Rotation Speed Control Pan Axis: 360 continuous rotation Rotation Angle If you have any questions about this document, please contatc Accsoon by sending a mail to sales@accsoon.com 31
Zenmuse Z15-A7. User Manual
Zenmuse Z15-A7 User Manual V1.0 2015.4 Warning & Disclaimer The Z15-A7 gimbal has been calibrated specifically for the designated camera and lens before it leaves the factory. Please mount only the designated
More informationZYX User Manual V Revision
ZYX User Manual V.00 206.07.26 Revision Contents Warning and Disclaimer... 3 I. Product Introduction... 4 II. Product List... 5. Package Contents... 5 III. Mounting & Configuration... 6. Gimbal Controller
More informationZenmuse Z15-BMPCC. User Manual. V1.0 May 09, 2014
Zenmuse Z15-BMPCC User Manual V1.0 May 09, 2014 Warning & Disclaimer Do not modify or adjust the Z15-BMPCC. The Z15-BMPCC has been calibrated specifically for the designated Camera and Lens before it leaves
More informationZenmuse Z15-GH4 (HD) User Manual
Zenmuse Z15-GH4 (HD) User Manual 2015.4 V1.4 Warning & Disclaimer Do not modify or adjust the Z15-GH4. The Z15-GH4 gimbal has been calibrated specifically for the designated camera and lens before it leaves
More informationZenmuse Z15-BMPCC User Manual
Zenmuse Z15-BMPCC User Manual 2014.12 V1.2 Warning & Disclaimer Do not modify or adjust the Z15-BMPCC. The Z15-BMPCC has been calibrated specifically for the designated Camera and Lens before it leaves
More informationRonin Release Notes. What s New?
Date : 2017.07.12 IMU Firmware : V 3.1 GCU Firmware : V 1.4 DJI Assistant App ios : V 1.1.28 PC Assistant V 2.5 MAC Assistant V 2.5 User Manual V 2.0 GCU firmware v1.4, PC/Mac Assistant v2.5. Added support
More informationRONIN THUMB CONTROLLER
RONIN THUMB CONTROLLER User Manual V1.0 2015.6 Disclaimers and Warnings Congratulations on purchasing your new DJI product. Carefully read the manual and all disclaimers before using this product. By using
More informationX-CAM A10-3H 3 Axis Gimbal for GOPRO. User Manual ( V2.00 )
X-CAM A10-3H 3 Axis Gimbal for GOPRO User Manual ( V2.00 ) The X-CAM A10-3H 3 Axis Gimbal has been setup and calibrated for use with GOPRO cameras, it is ready to use straight from the box. Specifications:
More informationZenmuse Z15-GH3 User Manual V1.00
Zenmuse Z15-GH3 User Manual V1.00 2013.09.13 Revision www.dji.com 2013 DJI Innovations. All Rights Reserved. 1 Warning & Disclaimer No adjusting or amending is allowed to Z15. Z15 is specialized for Camera
More informationiosd (On Screen Display)
iosd (On Screen Display) User Manual V2.2 For iosd Firmware Version V3.3 & iosd Assistant V4.1* July, 216 * iosd Firmware V3.3 compatible with iosd Assistant V4.1. www.dji.com 216 DJI All Rights Reserved.
More informationSTEP 1: MODULE MOUNTING / WIRING:
VER1.0 PINOUT DIAGRAM: PORT 1 - INPUT 1 (S.BUS, PWM, PPM INPUT) PORT 2 - INPUT 2 (PWM MODE INPUT OR AUX OUTPUT DEFINED IN SOFTWARE) PORT 3 - OUTPUT 1 (S.BUS OUTPUT) PORT 4 - OUTPUT 2 (SERVO OUTPUT) PORT
More informationZENMUSE H3-3D Gimbal. User Manual V DJI Innovations. All Rights Reserved.
ZENMUSE H3-3D Gimbal User Manual V1.02 2014.06.09 www.dji.com 2014 DJI Innovations. All Rights Reserved. Warning & Disclaimer H3-3D gimbal is calibrated before delivery, no adjustment or modification to
More informationRonin-M Release Notes
Date : 2017.07.12 IMU Firmware : V 1.4 GCU Firmware : V 1.7 DJI Assistant App ios : V 1.1.28 DJI Ronin Assistant App Android : V 1.0.7 PC Assistant V 2.5 MAC Assistant V 2.5 Remote Controller Firmware
More informationRonin-MX Release Notes
Date : 2017.06.22 IMU Firmware : V 2.3 GCU Firmware : V 1.5 PC Assistant : V 2.5 Mac Assistant : V 2.5 Updated GCU firmware to v1.5 to support Ronin-MX HB Controller. Copyright 2017 DJI All Rights Reserved.
More informationSenrigan-GP-45 Brushless Gimbal Instruction Manual v1.2
Senrigan-GP-45 Brushless Gimbal Instruction Manual v1.2 Page 1 of 16 Contents 1. Introduction...3 2. Check List...4 3. Equipment Required For Assembly...5 4. Assembly Steps Mechanism Parts...6 5. Assembly
More information3-Axis Stabilized Handheld Gimbal
3-Axis Stabilized Handheld Gimbal Guilin Feiyu Technology Incorporated Company User Manual EN V1.3 1. Product Overview * The showing sports camera is not included in the package Accessories Thumb Screw
More informationN1 Video Encoder. User Manual V
N1 Video Encoder User Manual V1.0 2015.8 Disclaimer Thank you for purchasing the N1 Video Encoder. Users must comply with local radio transmission laws and regulations when using this product. By using
More informationINSPIRE 1 Quick Start Guide V1.0
INSPIRE Quick Start Guide V.0 The Inspire is a professional aerial filmmaking and photography platform that is ready to fly right out of the box. Featuring an onboard camera equipped with a 0mm lens and
More informationPhase One. ixu-rs 1000 / ixu 1000 / ixu 150 UAV Camera Systems. For DJI M600 & M600 PRO. Installation Guide
Phase One ixu-rs 1000 / ixu 1000 / ixu 150 UAV Camera Systems Installation Guide For DJI M600 & M600 PRO 1 Phase One ixu-rs 1000 / ixu 1000 / ixu 150 UAV Camera Systems Installation Guide For DJI M600
More information3-Axis Stabilized Handheld Gimbal for Camera. Instructions. Guilin Feiyu Technology Incorporated Company
3-Axis Stabilized Handheld Gimbal for Camera Instructions Guilin Feiyu Technology Incorporated Company User Manual E N V. 0 Catalogue. G6 Plus Overview 2. Quick Start Guide 3 3. Balance the Gimbal 4 Balance
More information2-Axis Brushless Gimbal User Manual
2-Axis Brushless Gimbal User Manual I Introduction AGM 2-axis brushless gimbal is designed to accommodate the GoPro Hero3 camera, enhancing such various aspects of aerial videography as entertainment,
More informationARRIS Zhao Yun Pro User Manual. Content
ARRIS Zhao Yun Pro User Manual Thank you for buying ARRIS Zhao Yun Pro 3-Axis brushless Gimbal. Each gimbal has been adjusted and tested before we send it out. For this gimbal, Most customers can plug
More informationG360 Panoramic Camera Gimbal
Instruction Manual EN V 1.0 G360 Panoramic Camera Gimbal Compatible with Samsung gear 360/Kodak pixpro sp360/kodak pixpro sp360 4k/Sony FDR-X3000 etc. GuiLin FeiYu Technology Incorporated Company Product
More information3-Axis Wearable Gimbal for Action Camera. Instructions. Guilin Feiyu Technology Incorporated Company
-Axis Wearable Gimbal for Action Camera Instructions Guilin Feiyu Technology Incorporated Company User Manual E N V. Catalogue. WGX Overview. Quick Start Guide. Function operation 4 Working Mode 4 Function
More information3-Axis Stabilized Handheld Gimbal for Camera. Instructions. Guilin Feiyu Technology Incorporated Company
3-Axis Stabilized Handheld Gimbal for Camera Instructions Guilin Feiyu Technology Incorporated Company User Manual E N V2.0 Catalogue 1.Product Overview 1 2.Installation 2.1Battery Charging 2.2Battery
More informationRONIN 2 Diagram. 1. Grip 2. Gimbal Connector 3. HD-SDI Output 4. Power Button V Accessory Power Port
RONIN 2 Diagram 1. Grip 2. Gimbal Connector 3. HD-SDI Output 4. Power Button 5. 14.4V Accessory Power Port 6. Pan Motor 7. Camera Upper Mounting Plate 8. GPS 9. HD-SDI Input 10. Focus Mounting Plate 11.
More information3-Axis Stabilized Handheld Gimbal. Guilin Feiyu Technology Incorporated Company
3-Axis Stabilized Handheld Gimbal Guilin Feiyu Technology Incorporated Company User Manual EN V1.1 1. Product Overview * The showing sports camera is not included in the package Thumb Screw Tilt Axis Cross
More informationDOWNLOADING THE APP FOR APPLE PHONES: DOWNLOADING THE APP FOR ANDROID PHONES: For Android Phones go to Google Play or the Android Store.
DOWNLOADING THE APP FOR APPLE PHONES: DOWNLOADING THE APP FOR ANDROID PHONES: For Android Phones go to Google Play or the Android Store. For Apple Phones go to the app store and click GET. Make sure your
More information3-Axis Stabilized Handheld Gimbal. Guilin Feiyu Technology Incorporated Company
3-Axis Stabilized Handheld Gimbal Guilin Feiyu Technology Incorporated Company User Manual EN V1.0 1. Product Overview * The showing sports camera is not included in the package Thumb Screw Tilt Axis Cross
More informationX-CAM A10-3H for GOPRO 3 Axis Gimbal User Manual
X-CAM A10-3H for GOPRO 3 Axis Gimbal User Manual X-CAM A10-3H for GOPRO 3 Axis Gimbal has been finished with all the adjustments before launch the market, READY TO RUN. Accessories Parameters Weight: 280g(withoutGOPRO)
More informationZenmuse Z15 User Manual
Zenmuse Z15 User Manual V1.0 www.dji-innovations.com 1 Warning & Disclaimer Z15 is specialized for Camera and Lens before it leaves the factory. Please mount your camera to Z15 when get it. No adjusting
More informationG360 Panoramic Camera Gimbal
Instruction Manual EN G360 Panoramic Camera Gimbal Compatible with Samsung gear 360/Kodak pixpro sp360/kodak pixpro sp360 4k/Sony FDR-X3000 etc. GuiLin FeiYu Technology Incorporated Company V 1.0 Product
More informationREVISION HISTORY LEGEND. 1.0 Apr 20 th 2018 User Manual. Notes are used to highlight special operating conditions or steps of a procedure.
REVISION HISTORY REVISION DATE DESCRIPTION 1.0 Apr 20 th 2018 User Manual LEGEND Notes are used to highlight special operating conditions or steps of a procedure. NOTE Warnings are used to highlight procedures
More informationPhantom 2 Reference Guide
Phantom 2 Reference Guide Contents Section 1: Operation and Preparing for Flight. 2 Transmitter introduction 2 Controlling the Drone 2 Turning on the Transmitter 3 Range Extender 3 Basic Drone Parts 4
More informationNEWTON S USER MANUAL INTUITIVE AERIAL AB
NEWTON S 1.1.0 INTUITIVE AERIAL AB 2019-01-09 NEWTON S i CONTENTS 1 Introduction 1 1.1 Overview......................................... 1 1.2 Warnings and reservations................................
More information3-Axis Gimbal for Mirrorless Camera. Guilin Feiyu Technology Incorporated Company
3-Axis Gimbal for Mirrorless Camera Guilin Feiyu Technology Incorporated Company User Manual EN V 1.0 1. Product Overview 1 [6] [12] [1] [2] [3] [4] [5] [7] [8] [9] [10] [11] [24] [21] [13] [14] [15] [17]
More information3-Axis Stabilized Handheld Gimbal for Smartphone. Instructions. Guilin Feiyu Technology Incorporated Company. User Manual EN V1.0
-Axis Stabilized Handheld Gimbal for Smartphone Instructions Guilin Feiyu Technology Incorporated Company User Manual EN V.0 Catalogue. SPG Overview. Quick Start Guide. Charging 5 4. Function operation
More informationZenmuse Z15 User Manual
Zenmuse Z15 User Manual V2.0 2013.03.27 Revision www.dji-innovations.com 2012 DJI Innovations. All Rights Reserved. 1 Warning & Disclaimer No adjusting or amending is allowed to Z15. Z15 is specialized
More informationNEWTON S2 USER MANUAL INTUITIVE AERIAL AB
NEWTON S2 1.1.0 INTUITIVE AERIAL AB 2019-01-09 NEWTON S2 i CONTENTS 1 Introduction 1 1.1 Overview......................................... 1 1.2 Warnings and reservations................................
More informationRonin. User Manual V
Ronin V2.0 2016.02 User Manual Searching for Keywords Search for keywords such as battery and install to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows
More informationInspire 2 Release Notes
Date: 2018.04.18 Remote Controller Firmware: DJI GO 4 app: V01.02.0100 V01.01.0010 ios V 4.2.12 or above, Android V 4.2.12 or above Added support for adjusting the maximum velocity of aircraft s real-time
More information3-Axis Gimbal for Mirrorless Camera. Guilin Feiyu Technology Incorporated Company
3-Axis Gimbal for Mirrorless Camera Guilin Feiyu Technology Incorporated Company User Manual EN V 2.2 1. Product Overview 1 [5] [1] [11] [2] [4] [3] [6] [7] [8] [9] [10] [16] [17] [22] [23] [12] [13] [14]
More information3-Axis Gimbal for Mirrorless and DSLR Cameras. Guilin Feiyu Technology Incorporated Company
3-Axis Gimbal for Mirrorless and DSLR Cameras Guilin Feiyu Technology Incorporated Company User Manual EN V 2.1 1. Product Overview [5] [4] [3] [12] [7] [6] [9] [8] [2] [13] [14] [1] [15] [16] [17] [10]
More informationOSMO MOBILE. User Manual V
OSMO MOBILE User Manual V1.2 2017.03 Searching for Keywords Search for keywords such as battery and install to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on
More information3-Axis Stabilized Handheld Gimbal for Smartphone
3-Axis Stabilized Handheld Gimbal for Smartphone Guilin Feiyu Technology Incorporated Company User Manual EN V 1.1 Product overview 1. Structure Smartphone shown in illustrations is for reference only
More informationCRYSTALSKY CS785/CS785U/CS550. User Manual
CRYSTALSKY CS785/CS785U/CS550 User Manual V1.0 2018.08 Contents Disclaimer 2 Warning 2 Introduction 2 In the Box 3 Overview 3 Usage 4 Charging the Battery 4 Mounting the Battery 4 Mounting the Monitor
More informationTRD Beholder MS1 Camera Stabilizer
TRD Beholder MS1 Camera Stabilizer Table of Content Product Description Kit Includes Battery Setup and Charging Camera Setup and Balancing How to Use Other Features 1 2 2 4 5 6 Supported Cameras 6 Attention
More informationCENTURION MANUAL. Set-up and Operations Guide Glidecam Industries, Inc. 23 Joseph Street, Kingston, MA Customer Service Line
GLIDECAM CENTURION MANUAL Set-up and Operations Guide Glidecam Industries, Inc. 23 Joseph Street, Kingston, MA 02364 Customer Service Line 1-781-585-7900 Manufactured in the U.S.A. COPYRIGHT 2016 GLIDECAM
More information3-Axis Stabilizing Gimbal For Smartphone
3-Axis Stabilizing Gimbal For Smartphone Hohem Technology Co.,Ltd Safety instructions>> Read the operating instructions carefully and especially observe the safety information. If you do not follow the
More informationSP-7 AHRS. Firmware upgrade instructions. Installation and calibration
SP-7 AHRS Firmware upgrade instructions Installation and calibration General This document describes the firmware upgrade procedure and new functionality of the SP-7 Firmware release. The firmware upgrade
More informationDAT AL I N K 3. Quick Start Guide V1.0
DAT AL I N K 3 Quick Start Guide V1.0 Disclaimer Congratulations on purchasing your new DJI product. The information in this document affects your safety and your legal rights and responsibilities. Read
More informationTHIS IS THE CURRENT FF USER GUIDE AS OF PLEASE DO NOT USE ANY PREVIOUSLY DATED VERSIONS
THIS IS THE CURRENT FF USER GUIDE AS OF 02-26-2012 PLEASE DO NOT USE ANY PREVIOUSLY DATED VERSIONS INTRODUCTION: I compiled this guide from information posted on RCGroups.COM and from GoodLuckBuy.COM where
More informationCaution Notes. Features. Specifications. A3-L User Manual V1.0
Caution Notes Thank you for choosing our products. If any difficulties are encountered while setting up or operating it, please consult this manual first. For further help, please don t hesitate to contact
More informationPhantom 4 Pro/Pro+ Release Notes
Date : 2017.12.25 Aircraft Firmware : V 01.05.0300 Phantom 4 Pro Remote Controller Firmware : V 1.4.1.0 Phantom 4 Pro+ Remote Controller Firmware : V 1.2.2.0 DJI GO 4 App ios : V 4.1.20 DJI GO 4 App Android
More informationOSMO MOBILE 2. User Manual. v
OSMO MOBILE 2 User Manual v1.0 2018.02 Searching for Keywords Search for keywords such as battery and install to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F
More informationFlycam Buddy Mini Gimbal Camera Stabilizer (FLCM-BDY-MINI) 2
Flycam Buddy Mini Gimbal Camera Stabilizer (FLCM-BDY-MINI) 2 At FLYCAM, our goal is to ensure 100% Customer satisfaction in all that we do. We back our sales with a 6-months warranty from the date of purchase
More information3-axis Gyro & Flight Stabilizer for fixed-wing
A3 Super II 3-axis Gyro & Flight Stabilizer for fixed-wing User Manual 2015.4.20 Revision For Firmware Version V1.1, V1.0, Data Version V1.0 Copyright 2011-2015 HOBBYEAGLE. All Rights Reserved. http://www.hobbyeagle.com
More informationIMPORTANT MESSAGE 3 AXIS HANDHELD GIMBAL BATTERY SAFETY! USER MANUAL V1.2. Compatible With: WARRANTY LATEST INFORMATION
IMPORTANT MESSAGE Thank you for choosing EVO Gimbals as your camera stabilization solution! We know that buying a new product can be very exciting and we are sure that you probably can not wait to use
More informationAeroxcraft VTR-GP Tilt/Roll Gimbal User Manual
Aeroxcraft VTR-GP Tilt/Roll Gimbal User Manual Contents. Notes 2. Introduction 3. Installing GoPro camera 4. Connecting to a DJI Naza or Wookong 5. Installing HoverflyGimbal 6. Adjusting centre points
More informationManual DJI Phantom 2 Vision Dronexpert Gimbal
Manual DJI Phantom 2 Vision Dronexpert Gimbal V2 1. Remove battery from the phantom. 2. Place the Phantom upside down. 3. Pull the jackplug out of the camera 4. Lift the frame carefully from rubber holders.
More informationRonin-S Release Notes
Date: 2018.11.19 Firmware: v1.6.0.50 Ronin App ios: v1.1.6 Ronin App Android: v1.1.6 DJI Pro Assistant for Ronin (PC): v2.0.0 DJI Pro Assistant for Ronin (Mac): v2.0.0 User Manual: v1.2 Added option to
More informationGH-50. Gimbal Head. You re on steady ground
GH-50 Gimbal Head You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! The Oben GH-50 is a gimbal-type tripod head designed to balance a lens along its vertical and horizontal axes. Ideal
More informationFY WG2 3 Axis Wearable Gimbal. Compatible with Gopro Hero5 / Gopro Hero4 and cameras with similar dimensions
I n st r u c t i o n M a n u a l EN V 1.0 FY WG2 3 Axis Wearable Gimbal Compatible with Gopro Hero5 / Gopro Hero4 and cameras with similar dimensions GuiLin FeiYu Technology Incorporated Company User Guide!
More informationPhantom 4 Pro/Pro+ Release Notes
Date : 2018.03.08 Aircraft Firmware : V 01.05.0600 Phantom 4 Pro Remote Controller Firmware : V 1.4.1.0 Phantom 4 Pro+ Remote Controller Firmware : V 1.3.6.0 DJI GO 4 App ios : V 4.2.6 DJI GO 4 App Android
More informationRonin. User Manual V
Ronin V1.8 2015.7 User Manual Disclaimers and Warnings Congratulations on purchasing your new DJI product. Please read this manual and disclaimer carefully before using this product. By using this product,
More informationRONIN-M. User Manual V
RONIN-M V1.1 2015.5 User Manual Disclaimers and Warnings Congratulations on purchasing your new DJI product. Please read this manual and disclaimer carefully before using this product. By using this product,
More informationINSPIRE 1 Release Notes
2017.07.10 1. All-in-One firmware version updated to v01.11.01.50. 2. Remote Controller firmware version updated to v1.7.80. 3. DJI GO app ios version updated to v3.1.13. 4. DJI GO app Android version
More informationPhantom 2 FPV Hub Kit Instructions V1.1
Phantom 2 FPV Hub Kit Instructions V1.1 The Phantom 2 FPV Hub kit contains cables and the FPV Hub. It makes connecting an iosd mini, iosd Mark II or AVL58 wireless video transmission easy and solder free.
More informationTHIS IS THE CURRENT FF USER GUIDE AS OF PLEASE DO NOT USE ANY PREVIOUSLY DATED VERSIONS
THIS IS THE CURRENT FF USER GUIDE AS OF 05-04-2012 PLEASE DO NOT USE ANY PREVIOUSLY DATED VERSIONS INTRODUCTION: I compiled this guide from information posted on RCGroups.COM and from GoodLuckBuy.COM where
More informationCannes Edition Product List
Cannes Edition Product List Congratulations on your purchase of a DSLRProsCannes Edition Aerial Kit. Inside your Special Edition tough case you will find the following items with numbers that correspond
More informationOSMO Release Notes Major Updates. Notes
2017.08.31 1. Firmware Version: v1.11.2.70 2. DJI GO App ios Version: v3.1.15 3. DJI GO App Android Version: v3.1.11 1. Fixed an issue where videos could not be opened when recorded under multiple light
More informationDJI Ace One product release notes
Date : 26 July 2012 Ace One firmware version : 4.02 Ace Assistant software version : 2.4 Low Voltage Warning Semi Auto Takeoff & Landing (Optional) Ground Station chargeable functions: View (optional)
More informationNBS-2X NIMBUS STABILIZER QUICK-START GUIDE
NBS-2X NIMBUS STABILIZER QUICK-START GUIDE PREC AUTIONS Please read and follow these instructions and keep this manual in a safe place. Keep this product away from children. Make sure everything is secure
More informationARRIS X-Speed 250B Assembling Manual
ARRIS X-Speed 250B Assembling Manual Thank you for purchasing the ARRIS X-Speed 250B FPV Racing drone. Be sure to read through the entire manual before starting your build. If you bought the ARRIS X-Speed
More information3-axis Handheld Stabilizer Gimbal. Beholder DS2. Instruction Manual
3-axis Handheld Stabilizer Gimbal Beholder DS2 Instruction Manual V1.0 2017.07 Before using the product, please read this manual carefully. Be sure to keep this book in a safe place so that you can check
More information3-Axis Gimbal for Sony Camera. Guilin Feiyu Technology Incorporated Company
3-Axis Gimbal for Sony Camera Guilin Feiyu Technology Incorporated Company User Manual EN V 1.1 1. Product Overview Tilt axis Cross arm Roll axis Vertical arm Adapter(Clamping plate) Camera thumb screw
More informationOperators Guide. Vision 8 Pan & Tilt Head. Vinten Camera Control Solutions
Operators Guide Vision 8 Pan & Tilt Head Vinten Camera Control Solutions Vision 8 Pan and Tilt Head Publication Part No. 3441-8 Issue 4 Copyright Vinten Broadcast Limited 2004 All rights reserved throughout
More informationUser Manual V K Camera with an Integrated 3-axis Gimbal
User Manual V 1.1 4K Camera with an Integrated 3-axis Gimbal Table of Contents Introduction 3 At a Glance 3 Charging the Battery 4 Status Battery LED Indicator Description 4 Check the Battery Level 5 Insert
More informationInspire 2 Release Notes
Date: 2018.11.16 DJI GO 4 app: v01.02.0300 v01.01.0050 ios v4.3.0 or above, Android v4.3.0 or above Fixed a rare issue where compass interference altered the orientation of the aircraft. Fixed a rare issue
More informationII. Programming and Adjustments
- 35 - Dip es i) Dip for the M-17/27 combination relay box Dip switches are located inside most control boxes and are used to set, enable, or disable various electronic functions operated through the control
More informationStuduino Block Programming Environment Guide
Studuino Block Programming Environment Guide [DC Motors and Servomotors] This is a tutorial for the Studuino Block programming environment. As the Studuino programming environment develops, these instructions
More informationUser Manual for ARRIS FPV250 with SPRacing F3 Flight Controller With Cleanflight
User Manual for ARRIS FPV250 with SPRacing F3 Flight Controller With Cleanflight 1.12.00 1. How to Connect the F3 Flight Controller to the Computer. 1.1. Do not connect the F3 flight controller to the
More informationOverview. Connect the Flight Control Board and Receiver
Overview This article only describes the methods for connecting the receiver and ESC to the flight control board. You may need to refer to other materials for installation of other devices. If conditions
More information7.58 lbs (3440 g, including two batteries, without gimbal and camera)
Appendix Specifications Aircraft Weight Max Takeoff Weight GPS Hovering Accuracy Max Angular Velocity Max Tilt Angle Max Ascent Speed Max Descent Speed Max Takeoff Sea Level Max Wind Speed Resistance T650
More informationOperators Guide. Vision 11 Pan & Tilt Head. Vinten Camera Control Solutions
Operators Guide Vision 11 Pan & Tilt Head Vinten Camera Control Solutions Vision 11 Pan and Tilt Head Publication Part No. 3442-8 Issue 1 Copyright Vinten Broadcast Limited 2001 All rights reserved throughout
More informationThe Modern Archetype of Drones. Symmetrical facet design radiates a brilliance in the sky
The Modern Archetype of Drones Symmetrical facet design radiates a brilliance in the sky INSTANT FLYING The Xiro Xplorer is ready to fly right out of the box. Attach the propellers, install the battery
More informationG-30 Gimbal. User Manual
G-30 Gimbal. User Manual G-30 Gimbal is a high-precision and portable Gimbal specifically designed for ilook, ilook+, GoPro series cameras by Walkera. Adopting aluminum alloy CNC precision machining, brushless
More informationUser manual of the 4K camera waterproof gimbal
User manual of the 4K camera waterproof gimbal www.swellpro.com Content Installation 03 Operation 04 Gimbal Control Camera Control 04 04 Camera 04 Insert Micro SD card Camera Setting and Usage Camera Setting
More informationRONIN 2. User Manual
RONIN 2 User Manual V1.0 2017.09 Searching for Keywords Search for keywords such as battery and install to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows
More information3-Axis Stabilized Handheld Camera
User Manual V.0 Publish in May 206 3-Axis Stabilized Handheld Camera GuiLin FeiYu Technology Incorporated Company CONTENTS I Product Overview II EN 2. Function introduction of buttons and ports 2 2. Camera
More informationFY WG2 3 Axis Wearable Gimbal. and cameras with similar dimensions
FY WG2 3 Axis Wearable Gimbal and cameras with similar dimensions GuiLin FeiYu Technology Incorporated Company I n st r u ct i o n Manual E N V 1.0 ! Usage Scenario Demonstration 1 Rainy 2 Drift 3 Swimming
More informationBuddy - 2 Axis Gimbal Camera Stabilizer (FLCM-BDY)
Buddy - 2 Axis Gimbal Camera Stabilizer (FLCM-BDY) I N S T R U C T I O N M A N U A L All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any
More informationINSPIRE 1 Release Notes
2016.12.15 1. All-in-One firmware version updated to v1.10.1.40. 2. DJI GO app ios version updated to v3.1.1. 3. DJI GO app Android version updated to v3.1.1. What s New: 1. Optimized Flight Restriction
More informationHALO 2000 GIMBAL SILENT MOTOR DRIVE TECHNOLOGY DIRECT DRIVE BRUSHLESS MOTORS HIGH PERFORMANCE IMU, GPS AND COMPASS
HALO 2000 GIMBAL HALO 2000 GIMBAL The Halo 2000 is a three axes stabilised camera Gimbal, constructed from carbon fibre composite and built with leading-edge technology for film industry use. The carbon
More informationMAIN OPERATING INSTRUCTIONS
MAIN OPERATING INSTRUCTIONS MPT-9 Mechanical Pan Tilt Unit 1. INTRODUCTION You have bought an MPT-9 Mechanical Pan Tilt Unit out of the wide range of Cambo Video products. We expect that you will achieve
More informationMake a Quadcopter using KK Flight Controller
Make a Quadcopter using KK 2.1.5 Flight Controller 1 Typical Applications A quadcopter, also called a quadrotor helicopter or quadrotor, is a multirotor helicopter that is lifted and propelled by four
More informationFPVMODEL. Rescue-2. Integrated with 1 OX Zoom HD Camera Intended for Search and Rescue Missions USER MANUAL
FPVMODEL Rescue-2 USER MANUAL Integrated with 1 OX Zoom HD Camera Intended for Search and Rescue Missions FP IU n-= WWW.FPVMODEL.COM Copyright 201 7 FPVMODEL LIMITED WARNING AND DISCLAIMER Make sure not
More informationWaterproof 3-Axis Gimbal Camera (GC3) Manual
Waterproof 3-Axis Gimbal Camera (GC3) Manual www.swellpro.com Contents Attention Installation Operating the Gimbal Gimbal Control Camera Control Camera Installing a microsd Card Removing a microsd Card
More informationJIB EPT USER MANUAL. Please read this manual carefully before using the Alphatron JIB ETP unit! JIB & MOTORISED PAN AND TILT UNIT
JIB EPT JIB & MOTORISED PAN AND TILT UNIT USER MANUAL EN Please read this manual carefully before using the Alphatron JIB ETP unit! Thank you for purchasing a Alphatron product The EPT head is developed
More informationOperators Guide. Vision 100 Pan & Tilt Head. Vinten Camera Control Solutions
Operators Guide Vision 100 Pan & Tilt Head Vinten Camera Control Solutions Vision 100 Pan and Tilt Head Publication Part No. 3431-8 Issue 3 Copyright Vinten Broadcast Limited 2004 All rights reserved throughout
More information