Fabrication of highly precise fiber optical array products by use of laser based micro alignment

Size: px
Start display at page:

Download "Fabrication of highly precise fiber optical array products by use of laser based micro alignment"

Transcription

1 Fabrication of highly precise fiber optical array products by use of laser based micro alignment M. Zimmermann, L. Schaefer, M. Rank, M. Schmidt, S. Roth Bayerisches Laserzentrum GmbH, Konrad-Zuse-Str. 2-6, Erlangen, Germany,

2 Outline Introduction and Motivation - Simulation and Optimization - Experimental Results Conclusion

3 Motivation What is a Fiber Collimator Array? Design Combination of a fiber array and a micro lens array Collimation of the light transmitted from a fiber Coupling light into a fiber by focusing Free Space Light Coupling Efficient coupling of light into fibers or between fibers where multiple parallel optical fibers are used Especially single-mode communication Pointing Accuracy σ Angle of the collimated beam with respect to the optical axes Depends on: lateral fiber offset x

4 Motivation Thermal Laser Adjustment Temperature-Gradient-Mechanism (TGM) 1. Heating by laser radiation 2. Gradient formation, plastification Upsetting Mechanism 3. Cooling

5 Motivation Industrial Applications Optical drives Reed-contacts laser beam laser beam Reference: Philips Reference: Philips

6 Design of Fiber Collimator Arrays Properties Pitch: 2 mm Fiber: Singlemode d Fiber : 125 µm MLA: fused silica Requirements Total displacement 10 µm Displacement steps minimum 0.1 µm No thermal damage of the adhesive Mechanical stability

7 Simulation and Optimization of Fiber Collimator Arrays Actuator - Thickness - Length - Width of bridge Process data - Max./min. displacement - Max. temperature - Min. dumping FEM-Model SYSWELD SYSTUS International Results - Displacement - Temperature - Dumping Laser - Power [W] - Pulse width [τ p ] - Frequency [f p ] - Location of radiation

8 Simulation and Optimization of Fiber Collimator Arrays Displacement y-direction Thickness - Displacement Fiber displacement in arbitrarily direction possible!

9 Simulation and Optimization of Fiber Collimator Arrays Defined Limits for Actuator Alignment upper limit of dumping rad/mm Dumping Actuator thickness: 50 µm uniform heating Thickness -Dumping Actuator thickness: 400 µm Temperature gradient

10 Simulation and Optimization of Fiber Collimator Arrays Defined Limits for Actuator Alignment Maximum temperature at center of actuator 350 C Temperature Thickness -Temperature Thickness 100 µm µm

11 Experimental Results Laser Micro Alignment Measurement of pointing accuracy Laser 1310 nm

12 Experimental Results Laser Micro Alignment Displacement of actuator with different number of pulses Displacement [µm] Pulse Energy 19 mj 36 mj 82 mj Number of Pulses 10 µm displacement Requirements fulfilled

13 Conclusion Laser Micro Alignment - Alignment in µm range is possible - Simulation: sub-µm adjustment - Temperature treatment of adhesive and assemblies - Laser irradiation strategy reduces heat stress - Time-consuming actuator design - Outlook - Sub-µm alignment -> precise sensor necessary - Long term stability? - Non-thermal adjustment

14 Thank you for your kind attention! Questions?

Optoelectronic packaging: from challenges to solutions

Optoelectronic packaging: from challenges to solutions Optoelectronic packaging: from challenges to solutions Seminar on Optical Packaging Alpnach Dorf Mai 16, 2012 Christian Bosshard CSEM Center Central Switzerland Challenges in optoelectronic packaging General

More information

Experimental studies on effects at micro-structuring of highly reflecting metals using nano- and picosecond-lasers

Experimental studies on effects at micro-structuring of highly reflecting metals using nano- and picosecond-lasers Physics Procedia 5 (21) 245 253 LANE 21 www.elsevier.com/locate/procedia Experimental studies on effects at micro-structuring of highly reflecting metals using nano- and picosecond-lasers Yvonne Reg a

More information

Z-LASER Improved Beam Modeling With Optical Fibers. Vision Technology Forum April 15th, 2015

Z-LASER Improved Beam Modeling With Optical Fibers. Vision Technology Forum April 15th, 2015 Z-LASER Improved Beam Modeling With Optical Fibers Vision Technology Forum April 15th, 2015 Laser for 3D-Measurement One typical application is the optical 3D measurement of an object with laser triangulation

More information

COMPACT PRECISION LINEAR MOTORIZED ACTUATORS LSMA Series LSMA-173

COMPACT PRECISION LINEAR MOTORIZED ACTUATORS LSMA Series LSMA-173 COMPACT PRECISION LINEAR MOTORIZED ACTUATORS LSMA Series Narrow Width ized Translation Stages Compact (30 mm) design Precision bearing system Resolution 0.1 microns Standard stroke 20 and 50 mm Optional

More information

Industrial Fiber Beam Delivery for Ultrafast Lasers

Industrial Fiber Beam Delivery for Ultrafast Lasers Photonic Tools GmbH, 2017 Industrial Fiber Beam Delivery for Ultrafast Lasers System Technology and Industrial Application Bastian Kruschke 15.11.2017 Swissphotonics Workshop Specialty Optical Fibers Motivation

More information

FLEXPOINT Laser Modules. Laser Modules For Your Application. laser-components.com

FLEXPOINT Laser Modules. Laser Modules For Your Application. laser-components.com FLEXPOINT Laser Modules Laser Modules For Your Application laser-components.com Get in Contact LASER COMPONENTS USA, Inc. 116 South River Road, Building C Bedford, NH 03110 / USA www.laser-components.com

More information

COBRA Slim Linescan Illuminator

COBRA Slim Linescan Illuminator COBRA Slim Linescan Illuminator Key Features Design: Slim and compact Field adjustable: focussing distance and diffusers Chip-on-Board: Extreme brightness and high uniformity Crystal Clear Line Scan Images

More information

Waveguide Alignment System

Waveguide Alignment System Waveguide System The systems we provide for various types of device alignment feature our easy-to-use "Optical Aligner" alignment software and are built upon our craftsman-style processing and assembly

More information

The 3rd Dimension at the Speed of Light. Laser Processing Head RLSK

The 3rd Dimension at the Speed of Light. Laser Processing Head RLSK The 3rd Dimension at the Speed of Light Laser Processing Head RLSK Modules The Optics of 3D Precision High performance optics with scanner technology Easy cover slide exchange 536,4 415,4-36 1013,7 127,3

More information

MEMS SENSOR FOR MEMS METROLOGY

MEMS SENSOR FOR MEMS METROLOGY MEMS SENSOR FOR MEMS METROLOGY IAB Presentation Byungki Kim, H Ali Razavi, F. Levent Degertekin, Thomas R. Kurfess 9/24/24 OUTLINE INTRODUCTION Motivation Contact/Noncontact measurement Optical interferometer

More information

CinCam CCD - Technical Data -

CinCam CCD - Technical Data - - Technical Data - SENSOR DATA CCD-1201 CCD-1301 CCD-2301 CCD-2302 Format: 1/2 1/3 2/3 2/3 Active area: 6.5mm x 4.8mm 4.8mm x 3.6mm 9.0mm x 6.7mm 8.5mm x 7.1mm Number of pixel: 1388 x 1038 (1.4MPixel)

More information

Laser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly

Laser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly Laser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly Laser Diode Collimators 48TE, 48-0, and 44TE, Laser Diode Base Unit 44TE LD Collimators Types 48TE, 48-0 and

More information

1. Motivation 2. Nanopositioning and Nanomeasuring Machine 3. Multi-Sensor Approach 4. Conclusion and Outlook

1. Motivation 2. Nanopositioning and Nanomeasuring Machine 3. Multi-Sensor Approach 4. Conclusion and Outlook Prospects of multi-sensor technology for large-area applications in micro- and nanometrology 08/21/2011-08/25/2011, National Harbor E. Manske 1, G. Jäger 1, T. Hausotte 2 1 Ilmenau University of Technology,

More information

Increasing laser processing efficiency using multibeam and tailored beam profiles

Increasing laser processing efficiency using multibeam and tailored beam profiles Increasing laser processing efficiency using multibeam and tailored beam profiles Ulrich Rädel TOPAG Lasertechnik GmbH, Darmstadt Overview Presentation of company Topag Increasing processing efficiency

More information

Modelling of standard and specialty fibre-based systems using finite element methods

Modelling of standard and specialty fibre-based systems using finite element methods Modelling of standard and specialty fibre-based systems using finite element methods Natascia Castagna* a, Jacques Morel a, Luc Testa b, Sven Burger c,d a Federal Institute of Metrology METAS, Lindenweg

More information

Defining Cutting Edge Quality. Laser Cutting Head BIMO-FSC BIMO-FSC

Defining Cutting Edge Quality. Laser Cutting Head BIMO-FSC BIMO-FSC Defining Cutting Edge Quality Laser Cutting Head BIMO-FSC BIMO-FSC Laser Cutting Head BIMO-FSC for Flat Sheet Laser Cutting Until recently, fibre disc and diode lasers have been playing a minor role in

More information

A Global Laser Brand. Versatile Module

A Global Laser Brand. Versatile Module A Global Laser Brand Versatile Module The Versatile Module The VM (Versatile Module) from Imatronic provides a high quality and cost effect OEM solution to a wide range of applications including Machine

More information

RLH-A Remote Laser Hardening Adaptive

RLH-A Remote Laser Hardening Adaptive RLH-A Remote Laser Hardening Adaptive DESCRIPTION OF FUNCTION The RLH-A is a 1-D scanner that is based on the scapacs optic building blocks architecture with integrated highly dynamic temperature control.

More information

Collimators & Focus Guides FIBER WITH SMA AND MID-SIZE COLLIMATOR FIBER WITH SMA, MID-SIZE COLLIMATOR AND FOCUS GUIDE

Collimators & Focus Guides FIBER WITH SMA AND MID-SIZE COLLIMATOR FIBER WITH SMA, MID-SIZE COLLIMATOR AND FOCUS GUIDE ESRIPTION Fiberguide Industries has designed a line of standard ollimators and Focus uides for use with a wide variety of optical systems. These ruggedized modules are manufactured to accept A, ST, F,

More information

Advances in the power, brightness, weight and efficiency of fibercoupled diode lasers for pumping and direct diode applications

Advances in the power, brightness, weight and efficiency of fibercoupled diode lasers for pumping and direct diode applications Advances in the power, brightness, weight and efficiency of fibercoupled diode lasers for pumping and direct diode applications Chris Ebert*, Tina Guiney, Joe Braker, Dean Stapleton, Kim Alegria, David

More information

Laserline LDM The compact class for diode laser

Laserline LDM The compact class for diode laser Laserline LDM The compact class for diode laser Compact, Powerful and Reliable in any Application Compact The 19-inch rack mount technology offers a significant simplification of the laser integration

More information

COBRA Slim Linescan Illuminator

COBRA Slim Linescan Illuminator COBRA Slim Linescan Illuminator Key Features Design: Slim and compact Field adjustable: focusing distance and diffusers Chip-On-Board: Extreme brightness and high uniformity Crystal Clear Linescan Images

More information

Silicon Photonics System Integration by Ultra High Precision Photonic Packaging Techniques

Silicon Photonics System Integration by Ultra High Precision Photonic Packaging Techniques Silicon Photonics System Integration by Ultra High Precision Photonic Packaging Techniques Dr. Henning Schröder, Fraunhofer IZM Dr. Henning Schröder Fraunhofer IZM, Berlin fon: ++49 30 46403-277, fax:

More information

A Global Laser Brand. Gated Cameo

A Global Laser Brand. Gated Cameo A Global Laser Brand The is a miniature laser diode module that has a threaded barrel for easy bulkhead mounting which ensures good thermal contact between module and heat sink. This new concept in laser

More information

SpectraTec X. Multi- λ Laser Light Source BLUE SKY RESEARCH WAVELENGTHS

SpectraTec X. Multi- λ Laser Light Source BLUE SKY RESEARCH WAVELENGTHS Multi- λ Laser Light Source BLUE SKY RESEARCH Up to four individual laser wavelengths One single mode PM fiber output Ultra-stable power output Compact : 165mm x 125mm x 34mm Integrated control and drive

More information

LIMO Line Laser System - PEX High Power Diode Laser System for Industrial Applications

LIMO Line Laser System - PEX High Power Diode Laser System for Industrial Applications General Description: Flat Panel Display The laser system is engineered to generate a homogeneous line of 80 mm x 0.2 mm. Componets: - 9x Laser modules - 9x Fibres - Beam Shaping Module - High power laser

More information

F-Theta at Jenoptik a holistic approach

F-Theta at Jenoptik a holistic approach Lasers in Manufacturing Conference 2015 F-Theta at Jenoptik a holistic approach Dr. Tim Baldsiefen a, *, Dr. Jan Werschnik a, Lutz Reichmann a a Jenoptik Optical Systems GmbH, Göschwitzer Straße 25, 07745

More information

Progress of the Thomson Scattering Experiment on HSX

Progress of the Thomson Scattering Experiment on HSX Progress of the Thomson Scattering Experiment on HSX K. Zhai, F.S.B. Anderson, D.T. Anderson HSX Plasma Laboratory, UW-Madison Bill Mason PSL, UW-Madison, The Thomson scattering system being constructed

More information

Thread Mountable Cameo Laser Diode Module

Thread Mountable Cameo Laser Diode Module Thread Mountable Cameo Laser Diode Module Thread Mountable Cameo The Cameo is a unique, versatile, high quality industrial laser diode module widely used in alignment applications. Available in two models,

More information

Laser Micro-Fabricator. Innovative Laser Technology KORTherm Science

Laser Micro-Fabricator. Innovative Laser Technology KORTherm Science Laser Micro-Fabricator Innovative Laser Technology KORTherm Science Wavelength and material Interaction 10600n 1064nm 532nm 351nm 308nm 248nm 193nm 157nm N-H C-H O-H H-H O-O C-C N-O C-N N-N C-O THERMAL

More information

IDS3010 Ultra Precision Sensor

IDS3010 Ultra Precision Sensor WITTENSTEIN Group WITTENSTEIN Group (c) 2017, attocube systems AG - Germany. attocube systems and the logo are trademarks of attocube systems AG. Registered and/or otherwise protected in various countries

More information

New generation of LASER modules latest developments and how you can benefit from them. Stephan Broche

New generation of LASER modules latest developments and how you can benefit from them. Stephan Broche New generation of LASER modules latest developments and how you can benefit from them Stephan Broche What kind of restrictions exist with today s laser modules? Restrictions of present laser modules What

More information

arxiv: v1 [physics.ins-det] 13 Jan 2015

arxiv: v1 [physics.ins-det] 13 Jan 2015 The Assembly of the Belle II TOP Counter Boqun Wang, On behalf of the Belle II PID Group Department of Physics, University of Cincinnati, Cincinnati, OH, USA University of Cincinnati preprint UCHEP-14-01

More information

Technical Specifications for High speed PIV and High speed PIV-PLIF system

Technical Specifications for High speed PIV and High speed PIV-PLIF system Technical Specifications for High speed PIV and High speed PIV-PLIF system MODULE A. HIGH SPEED PIV (3-C) A1. Double Cavity High Speed Laser (up to 10 khz): The vendor should provide Dual Head (DH) laser

More information

Sensor based adaptive laser micromachining using ultrashort pulse lasers for zero-failure manufacturing

Sensor based adaptive laser micromachining using ultrashort pulse lasers for zero-failure manufacturing Sensor based adaptive laser micromachining using ultrashort pulse lasers for zero-failure manufacturing Fraunhofer Institute for Production Technology, Aachen M. Sc. Guilherme Mallmann Prof. Dr.-Ing. Robert

More information

APPLICATION OF Ni/C-GÖBEL MIRRORS AS PARALLEL BEAM X-RAY OPTICS FOR Cu Ka AND Mo Ka RADIATION

APPLICATION OF Ni/C-GÖBEL MIRRORS AS PARALLEL BEAM X-RAY OPTICS FOR Cu Ka AND Mo Ka RADIATION Copyright(c)JCPDS-International Centre for Diffraction Data 2000,Advances in X-ray Analysis,Vol.43 212 APPLICATION OF Ni/C-GÖBEL MIRRORS AS PARALLEL BEAM X-RAY OPTICS FOR AND RADIATION T. Holz, R. Dietsch,

More information

Laser Beam Shaping with Membrane Deformable Mirrors

Laser Beam Shaping with Membrane Deformable Mirrors Laser Beam Shaping with Membrane Deformable Mirrors Brian G. Henderson Justin D. Mansell Active Optical Systems, LLC http://www.aos-llc.com bhenderson@mza.com 1 Outline Introduction and Motivation Approach

More information

Catalog Single-Mode Fiber Coupled Laser System. SingleMode Fiber Coupled Diode Laser System

Catalog Single-Mode Fiber Coupled Laser System. SingleMode Fiber Coupled Diode Laser System SingleMode Fiber Coupled Diode Laser System 405nm,635nm,650nm,670nm,685nm,785nm, 830nm,850nm,880nm,1310nm,1550nm 1mW to 60mW Output Power PM fiber/sm fiber( MM fiber Optional) CW/TTL/Analog Modulation

More information

Efficient metal processing using high average power ultrafast laser

Efficient metal processing using high average power ultrafast laser Efficient metal processing using high average power ultrafast laser Strasbourg, September 13 th, 2017 J. Lopez J. Lopez et al., Journal of Laser Micro and Nanofabrication, submitted (2017) G. Mincuzzi

More information

Packaging and Integration Technologies for Silicon Photonics. Dr. Peter O Brien, Tyndall National Institute, Ireland.

Packaging and Integration Technologies for Silicon Photonics. Dr. Peter O Brien, Tyndall National Institute, Ireland. Packaging and Integration Technologies for Silicon Photonics Dr. Peter O Brien, Tyndall National Institute, Ireland. Opportunities for Silicon Photonics Stress Sensors Active Optical Cable 300 mm Silicon

More information

251 Presentations Dr. Rosen. Benay Sager Ameya Limaye Lauren Margolin Jamal Wilson Angela Tse

251 Presentations Dr. Rosen. Benay Sager Ameya Limaye Lauren Margolin Jamal Wilson Angela Tse 251 Presentations Dr. Rosen Benay Sager Ameya Limaye Lauren Margolin Jamal Wilson Angela Tse Use of Cure Modeling in Process Planning to Improve SLA Surface Finish Benay Sager SRL Presentation June 7,

More information

Company Pioneer in Ytterbium ultrafast lasers High quality manufacturing Intense and active R&D Located in Bordeaux and Paris US offices in Boston and

Company Pioneer in Ytterbium ultrafast lasers High quality manufacturing Intense and active R&D Located in Bordeaux and Paris US offices in Boston and High power ultrafast lasers Eric Mottay High Brightness Laser sources Burgdorf, November 26, 2009 Company Pioneer in Ytterbium ultrafast lasers High quality manufacturing Intense and active R&D Located

More information

Polymer Micro-Optics for Today s Compact Photonic Devices

Polymer Micro-Optics for Today s Compact Photonic Devices Polymer Micro-Optics for Today s Compact Photonic Devices Lynn Dobosz - North America Sales & Business Development for the Opto-Electronic Systems business unit of the Optical Systems division of Jenoptik

More information

LASER SENSOR. Series LAS-T5 and LAS-T. Key-Features:

LASER SENSOR. Series LAS-T5 and LAS-T. Key-Features: LASER SENSOR Series LAS-T and LAS-T Key-Features: Content: Technical Data...2 Technical Drawing...3 Teach-In - Diagrams...3 Order Code... measurement ranges from 4 to mm linearity up to ±2 µm resolution

More information

FAP 800-LB Series Long-Bundle Fiber Array Packages

FAP 800-LB Series Long-Bundle Fiber Array Packages Coherent Diode Lasers FAP FAP 8-LB Series Long-Bundle Fiber Array Packages Fiber Array Packages (FAP ) from Coherent are the highest quality fiber-coupled diode lasers in the industry, offering you the

More information

Effiziente Designverfahren für optische Laser- und Beleuchtungssysteme

Effiziente Designverfahren für optische Laser- und Beleuchtungssysteme 2015/11/06 Effiziente Designverfahren für optische Laser- und Beleuchtungssysteme Dr. Michael Kuhn, LightTrans GmbH Dr. Stephanie Kunath, Dynardo GmbH LightTrans A Short Overview Founded in 1999 Offices

More information

Diffractive Optics for Moon Topography Mapping

Diffractive Optics for Moon Topography Mapping Diffractive Optics for Moon Topography Mapping John G. Smith a, Luis Ramos-Izquierdo b, Andrew Stockham a, Stan Scott b a MEMS Optical *, Inc., 205 Import Circle, Huntsville, AL, USA 35806 b NASA Goddard

More information

LASCAD Tutorial No. 2: Modeling a laser cavity with side pumped rod

LASCAD Tutorial No. 2: Modeling a laser cavity with side pumped rod LASCAD Tutorial No. 2: Modeling a laser cavity with side pumped rod Revised January 19, 2009 Copyright 2006-2009 LAS-CAD GmbH Table of Contents 1 Table of Contents 1 Starting LASCAD and Defining a Simple

More information

SWAP DM: preliminary design and schematics of a DM for extreme adaptive optics

SWAP DM: preliminary design and schematics of a DM for extreme adaptive optics SWAP DM: preliminary design and schematics of a DM for extreme adaptive optics Funding: Teresa Kopf, M.Eng. Claudia Reinlein 1, Teresa Kopf 1, Andreas Kamm 1, Christoph Damm 1, Oliver Dietzel², Benjamin

More information

TABLE OF CONTENTS PRODUCT DESCRIPTION CINCAM CCD TECHNICAL DATA SENSOR RESPONSE DIMENSIONS CINCAM CCD LARGE FORMAT TECHNICAL DATA SENSOR RESPONSE

TABLE OF CONTENTS PRODUCT DESCRIPTION CINCAM CCD TECHNICAL DATA SENSOR RESPONSE DIMENSIONS CINCAM CCD LARGE FORMAT TECHNICAL DATA SENSOR RESPONSE TABLE OF CONTENTS PRODUCT DESCRIPTION CINCAM CCD TECHNICAL DATA SENSOR RESPONSE DIMENSIONS CINCAM CCD LARGE FORMAT TECHNICAL DATA SENSOR RESPONSE DIMENSIONS CINCAM CMOS TECHNICAL DATA SENSOR RESPONSE DIMENSIONS

More information

Thermal Heads for Power and Single-Shot Energy - mw to KW, mj to 300J

Thermal Heads for Power and Single-Shot Energy - mw to KW, mj to 300J Thermal Heads for Power and Single-Shot Energy - mw to KW, mj to 300J The highest damage threshold in the industry Models for 1500W, 5000W and 10KW for high power laser measurement LP coating that can

More information

IX-280-MXF Dual Laser Machining

IX-280-MXF Dual Laser Machining IX-280-MXF Dual Laser Machining Standard Operating Procedure Revision: 1.0 Last Updated: Feb.19/2015, Revised by Mohamad Rezaei Overview This document will provide a detailed operation procedure of the

More information

Lyte-MV Digital Userguide Red & IR Versions

Lyte-MV Digital Userguide Red & IR Versions Product Overview Lyte-MV Digital Userguide Red & IR Versions Thanks for purchasing the Lyte-MV, a laser diode module emitting a uniform (non-gaussian) and welldefined line with a user-adjustable focus.

More information

Supplementary Figure 1 Optimum transmissive mask design for shaping an incident light to a desired

Supplementary Figure 1 Optimum transmissive mask design for shaping an incident light to a desired Supplementary Figure 1 Optimum transmissive mask design for shaping an incident light to a desired tangential form. (a) The light from the sources and scatterers in the half space (1) passes through the

More information

Coherent Magnum II. Structured Light Pattern Generating Laser FEATURES

Coherent Magnum II. Structured Light Pattern Generating Laser FEATURES Coherent Magnum II Structured Light Pattern Generating Laser Coherent s Magnum II structured light laser is a high-power line generator developed for the most demanding industrial applications. It is available

More information

Recent Advances in Ultrafast Laser Subtractive and Additive Manufacturing

Recent Advances in Ultrafast Laser Subtractive and Additive Manufacturing Industrial Affiliates Symposium March 16-18, 2017 Recent Advances in Ultrafast Laser Subtractive and Additive Manufacturing Xiaoming Yu Assistant Professor Ultrafast Laser Processing Group CREOL, The College

More information

Application Note. Fiber Alignment Using The HXP50 Hexapod PROBLEM BACKGROUND

Application Note. Fiber Alignment Using The HXP50 Hexapod PROBLEM BACKGROUND Fiber Alignment Using The HXP50 Hexapod PROBLEM The production of low-loss interconnections between two or more optical components in a fiber optic assembly can be tedious and time consuming. Interfacing

More information

Application Note. Fiber Alignment Using the HXP50 Hexapod PROBLEM BACKGROUND

Application Note. Fiber Alignment Using the HXP50 Hexapod PROBLEM BACKGROUND Fiber Alignment Using the HXP50 Hexapod PROBLEM The production of low-loss interconnections between two or more optical components in a fiber optic assembly can be tedious and time consuming. Interfacing

More information

Dr. Larry J. Paxton Johns Hopkins University Applied Physics Laboratory Laurel, MD (301) (301) fax

Dr. Larry J. Paxton Johns Hopkins University Applied Physics Laboratory Laurel, MD (301) (301) fax Dr. Larry J. Paxton Johns Hopkins University Applied Physics Laboratory Laurel, MD 20723 (301) 953-6871 (301) 953-6670 fax Understand the instrument. Be able to convert measured counts/pixel on-orbit into

More information

UV-NIR LASER BEAM PROFILER

UV-NIR LASER BEAM PROFILER - Technical Data - CCD-1201 CCD-2301 CCD-2302 Standard Series Standard Series Standard Series SENSOR DATA Format: 1/2 2/3 2/3 Active area (without cover glass): 6.5mm x 4.8mm 9.0mm x 6.7mm 8.5mm x 7.1mm

More information

Endcap Modules for the ATLAS SemiConductor Tracker

Endcap Modules for the ATLAS SemiConductor Tracker Endcap Modules for the ATLAS SemiConductor Tracker RD3, Firenze, September 29 th, 23 Richard Nisius (MPI Munich) nisius@mppmu.mpg.de (For the ATLAS-SCT Collaboration) The plan of this presentation Introduction

More information

Connectorized Aspheric Fiber Optic Collimators

Connectorized Aspheric Fiber Optic Collimators Connectorized Aspheric Fiber Optic Collimators Diffraction limited performance Rugged stainless steel housing Pre-aligned for popular wavelengths Connectorized for quick assembly Threaded exterior for

More information

Product Specifications

Product Specifications Product Specifications The ksa RateRat Pro is a turnkey, real-time, in-situ optical reflectance probe designed for deposition monitoring of semi-absorbent thin films. The RateRat Pro measures deposition

More information

DigiPot Software Configuration Menu

DigiPot Software Configuration Menu C Option Centers the beam axially with the laser module s housing Available for the following modules: PM, PMT, SPM, & SPMT D Option Settings stored in nonvolatile memory Works with customer-supplied computer

More information

Light Tec. Characterization of ultra-polished surfaces in UV and IR. ICSO October 2016 Biarritz, France

Light Tec. Characterization of ultra-polished surfaces in UV and IR. ICSO October 2016 Biarritz, France ICSO 2016 17-21 October 2016 Biarritz, France Light Tec Characterization of ultra-polished surfaces in UV and IR Quentin Kuperman, Author, Technical Manager Yan Cornil, Presenter, CEO Workshop 2016, 12/09

More information

Laser Applications for Photovoltaics Crystalline and Thin Film Technologies

Laser Applications for Photovoltaics Crystalline and Thin Film Technologies LASERS & MATERIAL PROCESSING I OPTICAL SYSTEMS I INDUSTRIAL METROLOGY I TRAFFIC SOLUTIONS I DEFENSE & CIVIL SYSTEMS Laser Applications for Photovoltaics Crystalline and Thin Film Technologies Back contact

More information

INTRODUCTION SECURITY SERVICES BY WHITEBOX ROBOTICS

INTRODUCTION SECURITY SERVICES BY WHITEBOX ROBOTICS A 1 INTRODUCTION SECURITY SERVICES BY WHITEBOX ROBOTICS Unmanned Ground Vehicles (UGV), Unmanned Aerial Vehicles (UAV), Remote Controlled Weapon Stations (RCWS), and Ground Rader B 1 SOLUTION SERVICES

More information

Prototype Opto Chip Results

Prototype Opto Chip Results Prototype Opto Chip Results K.K. Gan, H.P. Kagan, R.D. Kass, J. Moore, S. Smith The Ohio State University Nov 5, 2008 K.K. Gan ATLAS Tracker Upgrade Workshop 1 Outline Introduction VCSEL driver chip PIN

More information

300W 1.5kW, QUBE Fiber Lasers

300W 1.5kW, QUBE Fiber Lasers Technical Specification 300W 1.5kW, QUBE Fiber Lasers CONTENTS 1.1 SCOPE 2 1.2 OPTICAL SPECIFICATION 2 1.3 BEAM DELIVERY FIBER SPECIFICATION 3 1.4 ALIGNMENT LASER 3 1.5 POWER DISTRIBUTION 3 1.6 WATER COOLING

More information

Five-Axis Fiber Aligner Model 9091 and Accessories

Five-Axis Fiber Aligner Model 9091 and Accessories USER S GUIDE Five-Axis Fiber Aligner Model 9091 and Accessories Includes Model 9131-FS-FC and Model 9131-FS-ST Fiber-Aligner Kits U.S. Patents: #5,282,393 & #5,400,674 5215 Hellyer Ave. San Jose, CA 95138-1001

More information

RgBLase LLC P/N: FB 671 XXX Diode Pumped Solid State Laser Module

RgBLase LLC P/N: FB 671 XXX Diode Pumped Solid State Laser Module Key Features: 671nm output, TEM00 Fiber Coupled (optional) Remote control TTL Modulation (optional) ESD protection Plug & Play Low Noise (optional) Applications: Bio Technology Photo Finishing Semiconductor

More information

Fiber Channel / FICON Singlemode Recommendation for 8 APC connectivity systems

Fiber Channel / FICON Singlemode Recommendation for 8 APC connectivity systems Fiber Channel / FICON Singlemode Recommendation for 8 APC connectivity systems WHITEPAPER Whitepaper: Lichtlauf Poarität - Codierung Autor: Harald Jungbäck Seite 1 von 5 Reflections: A singlemode (SM)

More information

Development of Hybrid Fluid Jet / Float Polishing Process

Development of Hybrid Fluid Jet / Float Polishing Process COMSOL Conference - Tokyo 2013 Development of Hybrid Fluid Jet / Float Polishing Process A. Beaucamp, Y. Namba Dept. of Mechanical Engineering, Chubu University, Japan Zeeko LTD, United Kingdom Research

More information

More Precision. optocontrol // Optical precision micrometers

More Precision. optocontrol // Optical precision micrometers More Precision optocontrol // Optical precision micrometers 4 Compact laser micrometers with high measuring rate optocontrol 1200 / 1201 Measuring range 2-30mm Resolution 10µm Measuring rate up to 100kHz

More information

Miniature Optics Optics Fiber Optics Borescopes Lasers Hologram

Miniature Optics Optics Fiber Optics Borescopes Lasers Hologram Miniature Optics Optics Fiber Optics Borescopes Lasers Hologram Western Photonics Technology 2005 Orange Street, #D, Alhambra CA USA 91803 Tel. 626 289 1686 Fax: 626 289 1048 Website: www.wptec.com Western

More information

High Precision Lens Mounting

High Precision Lens Mounting High Precision Lens Mounting APOMA Tucson Tech Workshop, 10-11 November, 2016 Presentation by Frédéric Lamontagne Institut national d optique (INO) Québec City, Canada 2016 Outline 1. Review of common

More information

2011 Optical Science & Engineering PhD Qualifying Examination Optical Sciences Track: Advanced Optics Time allowed: 90 minutes

2011 Optical Science & Engineering PhD Qualifying Examination Optical Sciences Track: Advanced Optics Time allowed: 90 minutes 2011 Optical Science & Engineering PhD Qualifying Examination Optical Sciences Track: Advanced Optics Time allowed: 90 minutes Answer all four questions. All questions count equally. 3(a) A linearly polarized

More information

More Precision. optoncdt // Laser displacement sensors (triangulation)

More Precision. optoncdt // Laser displacement sensors (triangulation) More Precision optoncdt // Laser displacement sensors (triangulation) 1 High Speed PSD Sensors optoncdt 1610 / 1630 INTER FACE Nine models with measuring ranges from mm to 100 mm Sensor head and separate

More information

Novel Magnetic Field Mapping Technology for Small and Closed Aperture Undulators

Novel Magnetic Field Mapping Technology for Small and Closed Aperture Undulators Novel Magnetic Field Mapping Technology for Small and Closed Aperture Undulators Erik Wallen and Hyun-Wook Kim 06.06.2017 Outline Introduction - Measurement systems at LBNL - Activities at LBNL - Need

More information

CHAPTER 2: THREE DIMENSIONAL TOPOGRAPHICAL MAPPING SYSTEM. Target Object

CHAPTER 2: THREE DIMENSIONAL TOPOGRAPHICAL MAPPING SYSTEM. Target Object CHAPTER 2: THREE DIMENSIONAL TOPOGRAPHICAL MAPPING SYSTEM 2.1 Theory and Construction Target Object Laser Projector CCD Camera Host Computer / Image Processor Figure 2.1 Block Diagram of 3D Areal Mapper

More information

Beam delivery components for high-power lasers

Beam delivery components for high-power lasers Beam delivery components for high-power lasers 1 Maximum performance. Minimum loss. Our goal is to optimize the beam delivery from your high-power laser to the work piece. Since our customers demand high

More information

Gregory Walsh, Ph.D. San Ramon, CA January 25, 2011

Gregory Walsh, Ph.D. San Ramon, CA January 25, 2011 Leica ScanStation:: Calibration and QA Gregory Walsh, Ph.D. San Ramon, CA January 25, 2011 1. Summary Leica Geosystems, in creating the Leica Scanstation family of products, has designed and conducted

More information

Development of a Design & Manufacturing Environment for Reliable and Cost- Effective PCB Embedding Technology

Development of a Design & Manufacturing Environment for Reliable and Cost- Effective PCB Embedding Technology Development of a Design & Manufacturing Environment for Reliable and Cost- Effective PCB Embedding Technology Outline Introduction CAD design tools for embedded components Thermo mechanical design rules

More information

Development of Optical Wiring Technology for Optical Interconnects

Development of Optical Wiring Technology for Optical Interconnects Development of Optical Wiring Technology for Optical Interconnects Mitsuhiro Iwaya*, Katsuki Suematsu*, Harumi Inaba*, Ryuichi Sugizaki*, Kazuyuki Fuse*, Takuya Nishimoto* 2, Kenji Kamoto* 3 We had developed

More information

Silicon Photonics Session

Silicon Photonics Session Advanced automated packaging and testing equipment to allow high volume manufacturing Torsten Vahrenkamp Torsten.Vahrenkamp@ficontec.com Silicon Photonics Session www.ficontec.com Our mission / what we

More information

Engineering Specifications for the X-Ray Focusing Lens System

Engineering Specifications for the X-Ray Focusing Lens System ENGINEERING SPECIFICATION DOCUMENT (ESD) Doc. No. SP-391-000-58 R0 LUSI SUB-SYSTEM Diagnostics Engineering Specifications for the X-Ray Focusing Lens System Prepared by: Marc Campell Signature Date Design

More information

Fiber optic connector for space applications

Fiber optic connector for space applications Fiber optic connector for space applications The AVIM connector family, is designed to be used in high reliability space and aerospace programs. These connectors are designed as Single Terminus, Fiber

More information

FEASIBILITY STUDY OF MULTIPOINT BASED LASER ALIGNMENT SYSTEM FOR CLIC

FEASIBILITY STUDY OF MULTIPOINT BASED LASER ALIGNMENT SYSTEM FOR CLIC FEASIBILITY STUDY OF MULTIPOINT BASED LASER ALIGNMENT SYSTEM FOR CLIC G. Stern, CERN, Geneva, Switzerland, ETHZ, Zurich, Switzerland F. Lackner, H. Mainaud-Durand, D. Piedigrossi, CERN, Geneva, Switzerland

More information

Efficient and Simple Precision. Laser Processing Head PDT-B

Efficient and Simple Precision. Laser Processing Head PDT-B Efficient and Simple Precision Laser Processing Head PDT-B Modules HIGHYAG PDT-B in action Tactile sensor: guides the laser focus Seam tracking The tactile sensor guides the focusing for laser welding

More information

Keysight Technologies Transducer Systems. Leading the Future for Extreme Accuracy Positioning Applications

Keysight Technologies Transducer Systems. Leading the Future for Extreme Accuracy Positioning Applications Keysight Technologies Transducer Systems Leading the Future for Extreme Accuracy Positioning Applications 02 Keysight Transducer Systems Brochure Keysight Laser Interferometry Systems Highest accuracy

More information

Chapter 3. Experimental Procedure

Chapter 3. Experimental Procedure Chapter 3 Experimental Procedure 33 3.1 Burner Systems Startup 3.1.1 Instrumentation power up The instrumentation of the burner including the PC need to be turned on, in order to provide safe ignition

More information

More Precision. confocaldt // Confocal chromatic measuring system

More Precision. confocaldt // Confocal chromatic measuring system More Precision confocaldt // Confocal chromatic measuring system Confocal chromatic hybrid sensors confocaldt IFS20 cable ø2.1 Hybrid sensors ø8mm with axial or radial (90 ) measuring direction strain

More information

Study of Air Bubble Induced Light Scattering Effect On Image Quality in 193 nm Immersion Lithography

Study of Air Bubble Induced Light Scattering Effect On Image Quality in 193 nm Immersion Lithography Study of Air Bubble Induced Light Scattering Effect On Image Quality in 193 nm Immersion Lithography Y. Fan, N. Lafferty, A. Bourov, L. Zavyalova, B. W. Smith Rochester Institute of Technology Microelectronic

More information

DRAGON-X. Technical Operating Data DATA SHEET

DRAGON-X. Technical Operating Data DATA SHEET DATA SHEET DRAGON-X DX1 RoHS Compatible Benefits Featuring High Flux GOLDEN DRAGON LED on Metal-Core PCB Thermally managed for almost immediate application Secondary Optics Options of 12 o, 30 o and 60

More information

Vibration-assisted Surface Texturing Yanjie Yuan, Jian Cao, Kornel Ehmann

Vibration-assisted Surface Texturing Yanjie Yuan, Jian Cao, Kornel Ehmann Vibration-assisted Surface Texturing Yanjie Yuan, Jian Cao, Kornel Ehmann SmartManufacturingSeries.com Outline Introduction and Motivation Types of Vibration-assisted Cutting and Texturing 1D Methods Resonant

More information

[1] involuteσ(spur and Helical Gear Design)

[1] involuteσ(spur and Helical Gear Design) [1] involuteσ(spur and Helical Gear Design) 1.3 Software Content 1.3.1 Icon Button There are 12 icon buttons: [Dimension], [Tooth Form], [Accuracy], [Strength], [Sliding Graph], [Hertz Stress Graph], [FEM],

More information

Polarizers. Laser Polarizers Broadband Polarizing Beamsplitting Cubes 78 Narrowband Polarizing Beamsplitting Cubes 79

Polarizers. Laser Polarizers Broadband Polarizing Beamsplitting Cubes 78 Narrowband Polarizing Beamsplitting Cubes 79 Prisms Introduction to Right Angle Prisms 72 Quality Right Angle Prisms 73 Laboratory Quality Right Angle Prisms 73 Equilateral Prisms 74 Wedge Prisms 75 Anamorphic Prism Pair 75 Penta Prisms 76 Dove Prisms

More information

Diamond FLQ-Series. Q-Switched Fiber Lasers FEATURES & BENEFITS

Diamond FLQ-Series. Q-Switched Fiber Lasers FEATURES & BENEFITS Series Q-Switched Fiber Lasers The Coherent Series is a 1 μm pulsed laser delivering 1 mj pulse energy with a fast turn-on time and high peak power (up to 10 kw) over a wide range of repetition rates to

More information

Embedded Polymer Waveguide to Optical Fiber Interconnects Creating the Optimal Link

Embedded Polymer Waveguide to Optical Fiber Interconnects Creating the Optimal Link Embedded Polymer Waveguide to Optical Fiber Interconnects Creating the Optimal Link Dr. Blanca Ruiz, Marika Immonen, Dr. Andres Ferrer, Christian Gsell, Dr. Peter Cristea CTI Corporate Technology & Innovation

More information